# We have to handle being invoked by both Cygnus configure and Autoconf.
#
# Cygnus configure incoming variables:
-# srcdir, subdir, target, arguments
+# srcdir, subdir, host, arguments
#
# Autoconf incoming variables:
-# srcdir, target, ac_configure_args
+# srcdir, host, ac_configure_args
#
-# We *could* figure srcdir and target out, but we'd have to do work that
+# We *could* figure srcdir and host out, but we'd have to do work that
# our caller has already done to figure them out and requiring these two
# seems reasonable.
+# Note that `host' in this case is GCC's `target'. Target libraries are
+# configured for a particular host.
if [ -n "${ac_configure_args}" ]; then
Makefile=${ac_file-Makefile}
fi
done
-case "${target}" in
+# Target libraries are configured for the host they run on, so we check
+# $host here, not $target.
+
+case "${host}" in
arc-*-elf*)
if [ x$enable_biendian != xyes ]
then
done
fi
;;
-# start-sanitize-m32rx
-m32r-*-*)
- if [ x$enable_m32rx = xno ]
+arm-*-*)
+ if [ x"$enable_fpu" = xno ]
then
old_multidirs=${multidirs}
multidirs=""
for x in ${old_multidirs}; do
case "${x}" in
- *m32rx*) : ;;
+ *fpu*) : ;;
+ *) multidirs="${multidirs} ${x}" ;;
+ esac
+ done
+ fi
+ if [ x"$enable_26bit" = xno ]
+ then
+ old_multidirs=${multidirs}
+ multidirs=""
+ for x in ${old_multidirs}; do
+ case "${x}" in
+ *26bit*) : ;;
+ *) multidirs="${multidirs} ${x}" ;;
+ esac
+ done
+ fi
+ if [ x"$enable_underscore" = xno ]
+ then
+ old_multidirs=${multidirs}
+ multidirs=""
+ for x in ${old_multidirs}; do
+ case "${x}" in
+ *under*) : ;;
+ *) multidirs="${multidirs} ${x}" ;;
+ esac
+ done
+ fi
+ if [ x"$enable_interwork" = xno ]
+ then
+ old_multidirs=${multidirs}
+ multidirs=""
+ for x in ${old_multidirs}; do
+ case "${x}" in
+ *interwork*) : ;;
+ *) multidirs="${multidirs} ${x}" ;;
+ esac
+ done
+ fi
+ if [ x$enable_biendian = xno ]
+ then
+ old_multidirs="${multidirs}"
+ multidirs=""
+ for x in ${old_multidirs}; do
+ case "$x" in
+ *le* ) : ;;
+ *be* ) : ;;
+ *) multidirs="${multidirs} ${x}" ;;
+ esac
+ done
+ fi
+ if [ x"$enable_nofmult" = xno ]
+ then
+ old_multidirs="${multidirs}"
+ multidirs=""
+ for x in ${old_multidirs}; do
+ case "$x" in
+ *nofmult* ) : ;;
*) multidirs="${multidirs} ${x}" ;;
esac
done
fi
;;
-# end-sanitize-m32rx
m68*-*-*)
if [ x$enable_softfloat = xno ]
then
esac
done
fi
+ case " $multidirs " in
+ *" mabi=64 "*)
+ # We will not be able to create libraries with -mabi=64 if
+ # we cannot even link a trivial program. It usually
+ # indicates the 64bit libraries are missing.
+ if echo 'main() {}' > conftest.c &&
+ ${CC-gcc} -mabi=64 conftest.c -o conftest; then
+ :
+ else
+ echo Could not link program with -mabi=64, disabling it.
+ old_multidirs="${multidirs}"
+ multidirs=""
+ for x in ${old_multidirs}; do
+ case "$x" in
+ *mabi=64* ) : ;;
+ *) multidirs="${multidirs} ${x}" ;;
+ esac
+ done
+ fi
+ rm -f conftest.c conftest
+ ;;
+ esac
;;
powerpc*-*-* | rs6000*-*-*)
if [ x$enable_softfloat = xno ]
done
fi
;;
+sparc*-*-*)
+ case " $multidirs " in
+ *" m64 "*)
+ # We will not be able to create libraries with -m64 if
+ # we cannot even link a trivial program. It usually
+ # indicates the 64bit libraries are missing.
+ if echo 'main() {}' > conftest.c &&
+ ${CC-gcc} -m64 conftest.c -o conftest; then
+ :
+ else
+ echo Could not link program with -m64, disabling it.
+ old_multidirs="${multidirs}"
+ multidirs=""
+ for x in ${old_multidirs}; do
+ case "$x" in
+ *m64* ) : ;;
+ *) multidirs="${multidirs} ${x}" ;;
+ esac
+ done
+ fi
+ rm -f conftest.c conftest
+ ;;
+ esac
+ ;;
esac
# Remove extraneous blanks from multidirs.
cat > Multi.tem <<\EOF
+PWD=$${PWDCMD-pwd}
+
# FIXME: There should be an @-sign in front of the `if'.
# Leave out until this is tested a bit more.
multi-do:
if [ -z "$(MULTIDIRS)" ]; then \
true; \
else \
- rootpre=`pwd`/; export rootpre; \
- srcrootpre=`cd $(srcdir); pwd`/; export srcrootpre; \
+ rootpre=`${PWD}`/; export rootpre; \
+ srcrootpre=`cd $(srcdir); ${PWD}`/; export srcrootpre; \
lib=`echo $${rootpre} | sed -e 's,^.*/\([^/][^/]*\)/$$,\1,'`; \
compiler="$(CC)"; \
for i in `$${compiler} --print-multi-lib 2>/dev/null`; do \
flags=`echo $$i | sed -e 's/^[^;]*;//' -e 's/@/ -/g'`; \
if (cd ../$${dir}/$${lib}; $(MAKE) $(FLAGS_TO_PASS) \
CFLAGS="$(CFLAGS) $${flags}" \
+ prefix="$(prefix)" \
+ exec_prefix="$(exec_prefix)" \
CXXFLAGS="$(CXXFLAGS) $${flags}" \
LIBCFLAGS="$(LIBCFLAGS) $${flags}" \
LIBCXXFLAGS="$(LIBCXXFLAGS) $${flags}" \
LDFLAGS="$(LDFLAGS) $${flags}" \
+ DESTDIR="$(DESTDIR)" \
$(DO)); then \
true; \
else \
if [ -z "$(MULTIDIRS)" ]; then \
true; \
else \
- lib=`pwd | sed -e 's,^.*/\([^/][^/]*\)$$,\1,'`; \
+ lib=`${PWD} | sed -e 's,^.*/\([^/][^/]*\)$$,\1,'`; \
for dir in Makefile $(MULTIDIRS); do \
if [ -f ../$${dir}/$${lib}/Makefile ]; then \
if (cd ../$${dir}/$${lib}; $(MAKE) $(FLAGS_TO_PASS) $(DO)); \
if [ "${ml_verbose}" = --verbose ]; then
echo "Running configure in multilib subdirs ${multidirs}"
- echo "pwd: `pwd`"
+ echo "pwd: `${PWDCMD-pwd}`"
fi
- ml_origdir=`pwd`
+ ml_origdir=`${PWDCMD-pwd}`
ml_libdir=`echo $ml_origdir | sed -e 's,^.*/,,'`
# cd to top-level-build-dir/${with_target_subdir}
cd ..
if [ "${ml_verbose}" = --verbose ]; then
echo "Running configure in multilib subdir ${ml_dir}"
- echo "pwd: `pwd`"
+ echo "pwd: `${PWDCMD-pwd}`"
fi
- if [ -d ${ml_dir} ]; then true; else mkdir ${ml_dir}; fi
+ if [ -d ${ml_dir} ]; then true; else
+ # ``mkdir -p ${ml_dir}'' See also mkinstalldirs.
+ pathcomp=""
+ for d in `echo ":${ml_dir}" | sed -ne 's/^:\//#/;s/^://;s/\// /g;s/^#/\//;p'`; do
+ pathcomp="$pathcomp$d"
+ case "$pathcomp" in
+ -* ) pathcomp=./$pathcomp ;;
+ esac
+ if test ! -d "$pathcomp"; then
+ echo "mkdir $pathcomp" 1>&2
+ mkdir "$pathcomp" > /dev/null 2>&1 || lasterr=$?
+ fi
+ if test ! -d "$pathcomp"; then
+ exit $lasterr
+ fi
+ pathcomp="$pathcomp/"
+ done
+ fi
if [ -d ${ml_dir}/${ml_libdir} ]; then true; else mkdir ${ml_dir}/${ml_libdir}; fi
# Eg: if ${ml_dir} = m68000/m68881, dotdot = ../../
case ${srcdir} in
".")
- echo Building symlink tree in `pwd`/${ml_dir}/${ml_libdir}
+ echo Building symlink tree in `${PWDCMD-pwd}`/${ml_dir}/${ml_libdir}
if [ "${with_target_subdir}" != "." ]; then
ml_unsubdir="../"
else
cd ${ml_dir}/${ml_libdir}
if [ -f ${ml_newsrcdir}/configure ]; then
- ml_recprog=${ml_newsrcdir}/configure
+ ml_recprog="${ml_newsrcdir}/configure --cache-file=../config.cache"
+ fi
+
+ # find compiler flag corresponding to ${ml_dir}
+ for i in `${CC-gcc} --print-multi-lib 2>/dev/null`; do
+ dir=`echo $i | sed -e 's/;.*$//'`
+ if [ "${dir}" = "${ml_dir}" ]; then
+ flags=`echo $i | sed -e 's/^[^;]*;//' -e 's/@/ -/g'`
+ break
+ fi
+ done
+ ml_config_env='CC="${CC_}$flags" CXX="${CXX_}$flags"'
+
+ if [ "${with_target_subdir}" = "." ]; then
+ CC_=$CC' '
+ CXX_=$CXX' '
+ else
+ # Create a regular expression that matches any string as long
+ # as ML_POPDIR.
+ popdir_rx=`echo ${ML_POPDIR} | sed 's,.,.,g'`
+ CC_=
+ for arg in ${CC}; do
+ case $arg in
+ -[BIL]"${ML_POPDIR}"/*)
+ CC_="${CC_}"`echo "X${arg}" | sed -n "s/X\\(-[BIL]${popdir_rx}\\).*/\\1/p"`/${ml_dir}`echo "X${arg}" | sed -n "s/X-[BIL]${popdir_rx}\\(.*\\)/\1/p"`' ' ;;
+ "${ML_POPDIR}"/*)
+ CC_="${CC_}"`echo "X${arg}" | sed -n "s/X\\(${popdir_rx}\\).*/\\1/p"`/${ml_dir}`echo "X${arg}" | sed -n "s/X${popdir_rx}\\(.*\\)/\\1/p"`' ' ;;
+ *)
+ CC_="${CC_}${arg} " ;;
+ esac
+ done
+
+ CXX_=
+ for arg in ${CXX}; do
+ case $arg in
+ -[BIL]"${ML_POPDIR}"/*)
+ CXX_="${CXX_}"`echo "X${arg}" | sed -n "s/X\\(-[BIL]${popdir_rx}\\).*/\\1/p"`/${ml_dir}`echo "X${arg}" | sed -n "s/X-[BIL]${popdir_rx}\\(.*\\)/\\1/p"`' ' ;;
+ "${ML_POPDIR}"/*)
+ CXX_="${CXX_}"`echo "X${arg}" | sed -n "s/X\\(${popdir_rx}\\).*/\\1/p"`/${ml_dir}`echo "X${arg}" | sed -n "s/X${popdir_rx}\\(.*\\)/\\1/p"`' ' ;;
+ *)
+ CXX_="${CXX_}${arg} " ;;
+ esac
+ done
+
+ if test "x${LD_LIBRARY_PATH+set}" = xset; then
+ LD_LIBRARY_PATH_=
+ for arg in `echo "$LD_LIBRARY_PATH" | tr ':' ' '`; do
+ case "$arg" in
+ "${ML_POPDIR}"/*)
+ arg=`echo "X${arg}" | sed -n "s/X\\(${popdir_rx}\\).*/\\1/p"`/${ml_dir}`echo "X${arg}" | sed -n "s/X${popdir_rx}\\(.*\\)/\\1/p"`
+ ;;
+ esac
+ if test "x$LD_LIBRARY_PATH_" != x; then
+ LD_LIBRARY_PATH_=$LD_LIBRARY_PATH_:$arg
+ else
+ LD_LIBRARY_PATH_=$arg
+ fi
+ done
+ ml_config_env="$ml_config_env LD_LIBRARY_PATH=$LD_LIBRARY_PATH_"
+ fi
+
+ if test "x${SHLIB_PATH+set}" = xset; then
+ SHLIB_PATH_=
+ for arg in `echo "$SHLIB_PATH" | tr ':' ' '`; do
+ case "$arg" in
+ "${ML_POPDIR}"/*)
+ arg=`echo "X${arg}" | sed -n "s/X\\(${popdir_rx}\\).*/\\1/p"`/${ml_dir}`echo "X${arg}" | sed -n "s/X${popdir_rx}\\(.*\\)/\\1/p"`
+ ;;
+ esac
+ if test "x$SHLIB_PATH_" != x; then
+ SHLIB_PATH_=$SHLIB_PATH_:$arg
+ else
+ SHLIB_PATH_=$arg
+ fi
+ done
+ ml_config_env="$ml_config_env SHLIB_PATH=$SHLIB_PATH_"
+ fi
fi
- if eval ${ml_config_shell} ${ml_recprog} \
+
+ if eval ${ml_config_env} ${ml_config_shell} ${ml_recprog} \
--with-multisubdir=${ml_dir} --with-multisrctop=${multisrctop} \
${ml_arguments} ${ml_srcdiroption} ; then
true
projects / deliverable / binutils-gdb.git / blobdiff