STRIP_FOR_TARGET
READELF_FOR_TARGET
RANLIB_FOR_TARGET
-OTOOL_FOR_TARGET
OBJDUMP_FOR_TARGET
OBJCOPY_FOR_TARGET
NM_FOR_TARGET
DLLTOOL_FOR_TARGET
AS_FOR_TARGET
AR_FOR_TARGET
-GDC_FOR_TARGET
GOC_FOR_TARGET
GFORTRAN_FOR_TARGET
GCC_FOR_TARGET
CXX_FOR_TARGET
CC_FOR_TARGET
READELF
-OTOOL
OBJDUMP
OBJCOPY
WINDMC
NM_FOR_BUILD
LD_FOR_BUILD
LDFLAGS_FOR_BUILD
-GDC_FOR_BUILD
GOC_FOR_BUILD
GFORTRAN_FOR_BUILD
DLLTOOL_FOR_BUILD
WINDMC
OBJCOPY
OBJDUMP
-OTOOL
READELF
CC_FOR_TARGET
CXX_FOR_TARGET
GCC_FOR_TARGET
GFORTRAN_FOR_TARGET
GOC_FOR_TARGET
-GDC_FOR_TARGET
AR_FOR_TARGET
AS_FOR_TARGET
DLLTOOL_FOR_TARGET
NM_FOR_TARGET
OBJCOPY_FOR_TARGET
OBJDUMP_FOR_TARGET
-OTOOL_FOR_TARGET
RANLIB_FOR_TARGET
READELF_FOR_TARGET
STRIP_FOR_TARGET
WINDMC WINDMC for the host
OBJCOPY OBJCOPY for the host
OBJDUMP OBJDUMP for the host
- OTOOL OTOOL for the host
READELF READELF for the host
CC_FOR_TARGET
CC for the target
GFORTRAN for the target
GOC_FOR_TARGET
GOC for the target
- GDC_FOR_TARGET
- GDC for the target
AR_FOR_TARGET
AR for the target
AS_FOR_TARGET
OBJCOPY for the target
OBJDUMP_FOR_TARGET
OBJDUMP for the target
- OTOOL_FOR_TARGET
- OTOOL for the target
RANLIB_FOR_TARGET
RANLIB for the target
READELF_FOR_TARGET
target-libffi \
target-libobjc \
target-libada \
- target-libgo \
- target-libphobos \
- target-zlib"
+ target-libgo"
# these tools are built using the target libraries, and are intended to
# run only in the target environment
esac
fi
-# Disable D on systems where it is known to not work.
-# For testing, you can override this with --enable-languages=d.
-case ,${enable_languages}, in
- *,d,*)
- ;;
- *)
- case "${target}" in
- *-*-darwin*)
- unsupported_languages="$unsupported_languages d"
- ;;
- esac
- ;;
-esac
-
-# Disable libphobos on unsupported systems.
-# For testing, you can override this with --enable-libphobos.
-if test -d ${srcdir}/libphobos; then
- if test x$enable_libphobos = x; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for libphobos support" >&5
-$as_echo_n "checking for libphobos support... " >&6; }
- if (srcdir=${srcdir}/libphobos; \
- . ${srcdir}/configure.tgt; \
- test "$LIBPHOBOS_SUPPORTED" != "yes")
- then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
- noconfigdirs="$noconfigdirs target-libphobos"
- else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
-$as_echo "yes" >&6; }
- fi
- fi
-fi
-
# Disable Fortran for some systems.
case "${target}" in
mmix-*-*)
;;
esac
-# Targets that do not use the ELF file format cannot support libctf.
-case "${target}" in
- *-*-pe | *-*-*vms* | *-*-darwin | *-*-*coff* | *-*-wince | *-*-mingw*)
- noconfigdirs="$noconfigdirs libctf"
- ;;
- *-*-aout | *-*-osf* | *-*-go32 | *-*-macos* | *-*-rhapsody*)
- noconfigdirs="$noconfigdirs libctf"
- ;;
- *-*-netbsdpe | *-*-cygwin* | *-*-pep | *-*-msdos | *-*-winnt)
- noconfigdirs="$noconfigdirs libctf"
- ;;
- ns32k-*-* | pdp11-*-* | *-*-aix* | *-*-netbsdaout)
- noconfigdirs="$noconfigdirs libctf"
- ;;
-esac
-
case "${target}" in
*-*-chorusos)
;;
noconfigdirs="$noconfigdirs ld gas gdb gprof"
noconfigdirs="$noconfigdirs sim target-rda"
;;
- amdgcn*-*-*)
- ;;
arm-*-darwin*)
noconfigdirs="$noconfigdirs ld gas gdb gprof"
noconfigdirs="$noconfigdirs sim target-rda"
CXX_FOR_BUILD=${CXX_FOR_BUILD-g++}
GFORTRAN_FOR_BUILD=${GFORTRAN_FOR_BUILD-gfortran}
GOC_FOR_BUILD=${GOC_FOR_BUILD-gccgo}
- GDC_FOR_BUILD=${GDC_FOR_BUILD-gdc}
DLLTOOL_FOR_BUILD=${DLLTOOL_FOR_BUILD-dlltool}
LD_FOR_BUILD=${LD_FOR_BUILD-ld}
NM_FOR_BUILD=${NM_FOR_BUILD-nm}
CXX_FOR_BUILD="\$(CXX)"
GFORTRAN_FOR_BUILD="\$(GFORTRAN)"
GOC_FOR_BUILD="\$(GOC)"
- GDC_FOR_BUILD="\$(GDC)"
DLLTOOL_FOR_BUILD="\$(DLLTOOL)"
LD_FOR_BUILD="\$(LD)"
NM_FOR_BUILD="\$(NM)"
CONFIGURE_GDB_TK=`echo ${GDB_TK} | sed s/-all-/-configure-/g`
INSTALL_GDB_TK=`echo ${GDB_TK} | sed s/-all-/-install-/g`
+# gdb depends on gnulib, but as nothing else does, only include it if
+# gdb is built.
+if echo " ${configdirs} " | grep " gdb " > /dev/null 2>&1 ; then
+ # The Makefile provides the ordering, so it's enough here to add
+ # gnulib to the list.
+ configdirs="${configdirs} gnulib"
+fi
+
# Strip out unwanted targets.
# While at that, we remove Makefiles if we were started for recursive
-
# Generate default definitions for YACC, M4, LEX and other programs that run
# on the build machine. These are used if the Makefile can't locate these
# programs in objdir.
-if test -n "$OTOOL"; then
- ac_cv_prog_OTOOL=$OTOOL
-elif test -n "$ac_cv_prog_OTOOL"; then
- OTOOL=$ac_cv_prog_OTOOL
-fi
-
-if test -n "$ac_cv_prog_OTOOL"; then
- for ncn_progname in otool; do
- # Extract the first word of "${ncn_progname}", so it can be a program name with args.
-set dummy ${ncn_progname}; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_prog_OTOOL+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- if test -n "$OTOOL"; then
- ac_cv_prog_OTOOL="$OTOOL" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_prog_OTOOL="${ncn_progname}"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
-fi
-fi
-OTOOL=$ac_cv_prog_OTOOL
-if test -n "$OTOOL"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $OTOOL" >&5
-$as_echo "$OTOOL" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
- done
-fi
-
-for ncn_progname in otool; do
- if test -n "$ncn_tool_prefix"; then
- # Extract the first word of "${ncn_tool_prefix}${ncn_progname}", so it can be a program name with args.
-set dummy ${ncn_tool_prefix}${ncn_progname}; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_prog_OTOOL+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- if test -n "$OTOOL"; then
- ac_cv_prog_OTOOL="$OTOOL" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_prog_OTOOL="${ncn_tool_prefix}${ncn_progname}"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
-fi
-fi
-OTOOL=$ac_cv_prog_OTOOL
-if test -n "$OTOOL"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $OTOOL" >&5
-$as_echo "$OTOOL" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
- fi
- if test -z "$ac_cv_prog_OTOOL" && test $build = $host ; then
- # Extract the first word of "${ncn_progname}", so it can be a program name with args.
-set dummy ${ncn_progname}; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_prog_OTOOL+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- if test -n "$OTOOL"; then
- ac_cv_prog_OTOOL="$OTOOL" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_prog_OTOOL="${ncn_progname}"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
-fi
-fi
-OTOOL=$ac_cv_prog_OTOOL
-if test -n "$OTOOL"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $OTOOL" >&5
-$as_echo "$OTOOL" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
- fi
- test -n "$ac_cv_prog_OTOOL" && break
-done
-
-if test -z "$ac_cv_prog_OTOOL" ; then
- set dummy otool
- if test $build = $host ; then
- OTOOL="$2"
- else
- OTOOL="${ncn_tool_prefix}$2"
- fi
-fi
-
-
-
if test -n "$READELF"; then
ac_cv_prog_READELF=$READELF
elif test -n "$ac_cv_prog_READELF"; then
-if test -n "$GDC_FOR_TARGET"; then
- ac_cv_prog_GDC_FOR_TARGET=$GDC_FOR_TARGET
-elif test -n "$ac_cv_prog_GDC_FOR_TARGET"; then
- GDC_FOR_TARGET=$ac_cv_prog_GDC_FOR_TARGET
-fi
-
-if test -n "$ac_cv_prog_GDC_FOR_TARGET"; then
- for ncn_progname in gdc; do
- # Extract the first word of "${ncn_progname}", so it can be a program name with args.
-set dummy ${ncn_progname}; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_prog_GDC_FOR_TARGET+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- if test -n "$GDC_FOR_TARGET"; then
- ac_cv_prog_GDC_FOR_TARGET="$GDC_FOR_TARGET" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_prog_GDC_FOR_TARGET="${ncn_progname}"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
-fi
-fi
-GDC_FOR_TARGET=$ac_cv_prog_GDC_FOR_TARGET
-if test -n "$GDC_FOR_TARGET"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $GDC_FOR_TARGET" >&5
-$as_echo "$GDC_FOR_TARGET" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
- done
-fi
-
-if test -z "$ac_cv_prog_GDC_FOR_TARGET" && test -n "$with_build_time_tools"; then
- for ncn_progname in gdc; do
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for ${ncn_progname} in $with_build_time_tools" >&5
-$as_echo_n "checking for ${ncn_progname} in $with_build_time_tools... " >&6; }
- if test -x $with_build_time_tools/${ncn_progname}; then
- ac_cv_prog_GDC_FOR_TARGET=$with_build_time_tools/${ncn_progname}
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
-$as_echo "yes" >&6; }
- break
- else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
- fi
- done
-fi
-
-if test -z "$ac_cv_prog_GDC_FOR_TARGET"; then
- for ncn_progname in gdc; do
- if test -n "$ncn_target_tool_prefix"; then
- # Extract the first word of "${ncn_target_tool_prefix}${ncn_progname}", so it can be a program name with args.
-set dummy ${ncn_target_tool_prefix}${ncn_progname}; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_prog_GDC_FOR_TARGET+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- if test -n "$GDC_FOR_TARGET"; then
- ac_cv_prog_GDC_FOR_TARGET="$GDC_FOR_TARGET" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_prog_GDC_FOR_TARGET="${ncn_target_tool_prefix}${ncn_progname}"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
-fi
-fi
-GDC_FOR_TARGET=$ac_cv_prog_GDC_FOR_TARGET
-if test -n "$GDC_FOR_TARGET"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $GDC_FOR_TARGET" >&5
-$as_echo "$GDC_FOR_TARGET" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
- fi
- if test -z "$ac_cv_prog_GDC_FOR_TARGET" && test $build = $target ; then
- # Extract the first word of "${ncn_progname}", so it can be a program name with args.
-set dummy ${ncn_progname}; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_prog_GDC_FOR_TARGET+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- if test -n "$GDC_FOR_TARGET"; then
- ac_cv_prog_GDC_FOR_TARGET="$GDC_FOR_TARGET" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_prog_GDC_FOR_TARGET="${ncn_progname}"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
-fi
-fi
-GDC_FOR_TARGET=$ac_cv_prog_GDC_FOR_TARGET
-if test -n "$GDC_FOR_TARGET"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $GDC_FOR_TARGET" >&5
-$as_echo "$GDC_FOR_TARGET" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
- fi
- test -n "$ac_cv_prog_GDC_FOR_TARGET" && break
- done
-fi
-
-if test -z "$ac_cv_prog_GDC_FOR_TARGET" ; then
- set dummy gdc
- if test $build = $target ; then
- GDC_FOR_TARGET="$2"
- else
- GDC_FOR_TARGET="${ncn_target_tool_prefix}$2"
- fi
-else
- GDC_FOR_TARGET="$ac_cv_prog_GDC_FOR_TARGET"
-fi
-
-
-
cat > conftest.c << \EOF
#ifdef __GNUC__
gcc_yay;
-if test -z "$ac_cv_path_OTOOL_FOR_TARGET" ; then
- if test -n "$with_build_time_tools"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for otool in $with_build_time_tools" >&5
-$as_echo_n "checking for otool in $with_build_time_tools... " >&6; }
- if test -x $with_build_time_tools/otool; then
- OTOOL_FOR_TARGET=`cd $with_build_time_tools && pwd`/otool
- ac_cv_path_OTOOL_FOR_TARGET=$OTOOL_FOR_TARGET
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_path_OTOOL_FOR_TARGET" >&5
-$as_echo "$ac_cv_path_OTOOL_FOR_TARGET" >&6; }
- else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
- fi
- elif test $build != $host && test $have_gcc_for_target = yes; then
- OTOOL_FOR_TARGET=`$GCC_FOR_TARGET --print-prog-name=otool`
- test $OTOOL_FOR_TARGET = otool && OTOOL_FOR_TARGET=
- test -n "$OTOOL_FOR_TARGET" && ac_cv_path_OTOOL_FOR_TARGET=$OTOOL_FOR_TARGET
- fi
-fi
-if test -z "$ac_cv_path_OTOOL_FOR_TARGET" && test -n "$gcc_cv_tool_dirs"; then
- # Extract the first word of "otool", so it can be a program name with args.
-set dummy otool; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_path_OTOOL_FOR_TARGET+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- case $OTOOL_FOR_TARGET in
- [\\/]* | ?:[\\/]*)
- ac_cv_path_OTOOL_FOR_TARGET="$OTOOL_FOR_TARGET" # Let the user override the test with a path.
- ;;
- *)
- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $gcc_cv_tool_dirs
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_path_OTOOL_FOR_TARGET="$as_dir/$ac_word$ac_exec_ext"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
- ;;
-esac
-fi
-OTOOL_FOR_TARGET=$ac_cv_path_OTOOL_FOR_TARGET
-if test -n "$OTOOL_FOR_TARGET"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $OTOOL_FOR_TARGET" >&5
-$as_echo "$OTOOL_FOR_TARGET" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
-fi
-if test -z "$ac_cv_path_OTOOL_FOR_TARGET" ; then
-
-
-if test -n "$OTOOL_FOR_TARGET"; then
- ac_cv_prog_OTOOL_FOR_TARGET=$OTOOL_FOR_TARGET
-elif test -n "$ac_cv_prog_OTOOL_FOR_TARGET"; then
- OTOOL_FOR_TARGET=$ac_cv_prog_OTOOL_FOR_TARGET
-fi
-
-if test -n "$ac_cv_prog_OTOOL_FOR_TARGET"; then
- for ncn_progname in otool; do
- # Extract the first word of "${ncn_progname}", so it can be a program name with args.
-set dummy ${ncn_progname}; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_prog_OTOOL_FOR_TARGET+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- if test -n "$OTOOL_FOR_TARGET"; then
- ac_cv_prog_OTOOL_FOR_TARGET="$OTOOL_FOR_TARGET" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_prog_OTOOL_FOR_TARGET="${ncn_progname}"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
-fi
-fi
-OTOOL_FOR_TARGET=$ac_cv_prog_OTOOL_FOR_TARGET
-if test -n "$OTOOL_FOR_TARGET"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $OTOOL_FOR_TARGET" >&5
-$as_echo "$OTOOL_FOR_TARGET" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
- done
-fi
-
-if test -z "$ac_cv_prog_OTOOL_FOR_TARGET" && test -n "$with_build_time_tools"; then
- for ncn_progname in otool; do
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for ${ncn_progname} in $with_build_time_tools" >&5
-$as_echo_n "checking for ${ncn_progname} in $with_build_time_tools... " >&6; }
- if test -x $with_build_time_tools/${ncn_progname}; then
- ac_cv_prog_OTOOL_FOR_TARGET=$with_build_time_tools/${ncn_progname}
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: yes" >&5
-$as_echo "yes" >&6; }
- break
- else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
- fi
- done
-fi
-
-if test -z "$ac_cv_prog_OTOOL_FOR_TARGET"; then
- for ncn_progname in otool; do
- if test -n "$ncn_target_tool_prefix"; then
- # Extract the first word of "${ncn_target_tool_prefix}${ncn_progname}", so it can be a program name with args.
-set dummy ${ncn_target_tool_prefix}${ncn_progname}; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_prog_OTOOL_FOR_TARGET+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- if test -n "$OTOOL_FOR_TARGET"; then
- ac_cv_prog_OTOOL_FOR_TARGET="$OTOOL_FOR_TARGET" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_prog_OTOOL_FOR_TARGET="${ncn_target_tool_prefix}${ncn_progname}"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
-fi
-fi
-OTOOL_FOR_TARGET=$ac_cv_prog_OTOOL_FOR_TARGET
-if test -n "$OTOOL_FOR_TARGET"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $OTOOL_FOR_TARGET" >&5
-$as_echo "$OTOOL_FOR_TARGET" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
- fi
- if test -z "$ac_cv_prog_OTOOL_FOR_TARGET" && test $build = $target ; then
- # Extract the first word of "${ncn_progname}", so it can be a program name with args.
-set dummy ${ncn_progname}; ac_word=$2
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for $ac_word" >&5
-$as_echo_n "checking for $ac_word... " >&6; }
-if ${ac_cv_prog_OTOOL_FOR_TARGET+:} false; then :
- $as_echo_n "(cached) " >&6
-else
- if test -n "$OTOOL_FOR_TARGET"; then
- ac_cv_prog_OTOOL_FOR_TARGET="$OTOOL_FOR_TARGET" # Let the user override the test.
-else
-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
-for as_dir in $PATH
-do
- IFS=$as_save_IFS
- test -z "$as_dir" && as_dir=.
- for ac_exec_ext in '' $ac_executable_extensions; do
- if as_fn_executable_p "$as_dir/$ac_word$ac_exec_ext"; then
- ac_cv_prog_OTOOL_FOR_TARGET="${ncn_progname}"
- $as_echo "$as_me:${as_lineno-$LINENO}: found $as_dir/$ac_word$ac_exec_ext" >&5
- break 2
- fi
-done
- done
-IFS=$as_save_IFS
-
-fi
-fi
-OTOOL_FOR_TARGET=$ac_cv_prog_OTOOL_FOR_TARGET
-if test -n "$OTOOL_FOR_TARGET"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: $OTOOL_FOR_TARGET" >&5
-$as_echo "$OTOOL_FOR_TARGET" >&6; }
-else
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: no" >&5
-$as_echo "no" >&6; }
-fi
-
-
- fi
- test -n "$ac_cv_prog_OTOOL_FOR_TARGET" && break
- done
-fi
-
-if test -z "$ac_cv_prog_OTOOL_FOR_TARGET" ; then
- set dummy otool
- if test $build = $target ; then
- OTOOL_FOR_TARGET="$2"
- else
- OTOOL_FOR_TARGET="${ncn_target_tool_prefix}$2"
- fi
-else
- OTOOL_FOR_TARGET="$ac_cv_prog_OTOOL_FOR_TARGET"
-fi
-
-else
- OTOOL_FOR_TARGET=$ac_cv_path_OTOOL_FOR_TARGET
-fi
-
-
-
-
if test -z "$ac_cv_path_RANLIB_FOR_TARGET" ; then
if test -n "$with_build_time_tools"; then
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking for ranlib in $with_build_time_tools" >&5
fi
fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking where to find the target gdc" >&5
-$as_echo_n "checking where to find the target gdc... " >&6; }
-if test "x${build}" != "x${host}" ; then
- if expr "x$GDC_FOR_TARGET" : "x/" > /dev/null; then
- # We already found the complete path
- ac_dir=`dirname $GDC_FOR_TARGET`
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: pre-installed in $ac_dir" >&5
-$as_echo "pre-installed in $ac_dir" >&6; }
- else
- # Canadian cross, just use what we found
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: pre-installed" >&5
-$as_echo "pre-installed" >&6; }
- fi
-else
- ok=yes
- case " ${configdirs} " in
- *" gcc "*) ;;
- *) ok=no ;;
- esac
- case ,${enable_languages}, in
- *,d,*) ;;
- *) ok=no ;;
- esac
- if test $ok = yes; then
- # An in-tree tool is available and we can use it
- GDC_FOR_TARGET='$$r/$(HOST_SUBDIR)/gcc/gdc -B$$r/$(HOST_SUBDIR)/gcc/'
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: just compiled" >&5
-$as_echo "just compiled" >&6; }
- elif expr "x$GDC_FOR_TARGET" : "x/" > /dev/null; then
- # We already found the complete path
- ac_dir=`dirname $GDC_FOR_TARGET`
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: pre-installed in $ac_dir" >&5
-$as_echo "pre-installed in $ac_dir" >&6; }
- elif test "x$target" = "x$host"; then
- # We can use an host tool
- GDC_FOR_TARGET='$(GDC)'
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: host tool" >&5
-$as_echo "host tool" >&6; }
- else
- # We need a cross tool
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: pre-installed" >&5
-$as_echo "pre-installed" >&6; }
- fi
-fi
-
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking where to find the target ld" >&5
$as_echo_n "checking where to find the target ld... " >&6; }
if test "x${build}" != "x${host}" ; then
fi
fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: checking where to find the target otool" >&5
-$as_echo_n "checking where to find the target otool... " >&6; }
-if test "x${build}" != "x${host}" ; then
- if expr "x$OTOOL_FOR_TARGET" : "x/" > /dev/null; then
- # We already found the complete path
- ac_dir=`dirname $OTOOL_FOR_TARGET`
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: pre-installed in $ac_dir" >&5
-$as_echo "pre-installed in $ac_dir" >&6; }
- else
- # Canadian cross, just use what we found
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: pre-installed" >&5
-$as_echo "pre-installed" >&6; }
- fi
-else
- if expr "x$OTOOL_FOR_TARGET" : "x/" > /dev/null; then
- # We already found the complete path
- ac_dir=`dirname $OTOOL_FOR_TARGET`
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: pre-installed in $ac_dir" >&5
-$as_echo "pre-installed in $ac_dir" >&6; }
- elif test "x$target" = "x$host"; then
- # We can use an host tool
- OTOOL_FOR_TARGET='$(OTOOL)'
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: host tool" >&5
-$as_echo "host tool" >&6; }
- else
- # We need a cross tool
- { $as_echo "$as_me:${as_lineno-$LINENO}: result: pre-installed" >&5
-$as_echo "pre-installed" >&6; }
- fi
-fi
-
{ $as_echo "$as_me:${as_lineno-$LINENO}: checking where to find the target ranlib" >&5
$as_echo_n "checking where to find the target ranlib... " >&6; }
if test "x${build}" != "x${host}" ; then