ac_help=
ac_default_prefix=/usr/local
# Any additions from configure.in:
+ac_help="$ac_help
+ --with-build-libsubdir=[DIR] Directory where to find libraries for build system"
ac_help="$ac_help
--enable-libada Builds libada directory"
ac_help="$ac_help
fi
echo $ac_n "checking host system type""... $ac_c" 1>&6
-echo "configure:612: checking host system type" >&5
+echo "configure:614: checking host system type" >&5
host_alias=$host
case "$host_alias" in
echo "$ac_t""$host" 1>&6
echo $ac_n "checking target system type""... $ac_c" 1>&6
-echo "configure:633: checking target system type" >&5
+echo "configure:635: checking target system type" >&5
target_alias=$target
case "$target_alias" in
echo "$ac_t""$target" 1>&6
echo $ac_n "checking build system type""... $ac_c" 1>&6
-echo "configure:651: checking build system type" >&5
+echo "configure:653: checking build system type" >&5
build_alias=$build
case "$build_alias" in
# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
# ./install, which can be erroneously created by make from ./install.sh.
echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6
-echo "configure:706: checking for a BSD compatible install" >&5
+echo "configure:708: checking for a BSD compatible install" >&5
if test -z "$INSTALL"; then
if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
echo $ac_n "checking whether ln works""... $ac_c" 1>&6
-echo "configure:759: checking whether ln works" >&5
+echo "configure:761: checking whether ln works" >&5
if eval "test \"`echo '$''{'acx_cv_prog_LN'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
fi
echo $ac_n "checking whether ln -s works""... $ac_c" 1>&6
-echo "configure:783: checking whether ln -s works" >&5
+echo "configure:785: checking whether ln -s works" >&5
if eval "test \"`echo '$''{'ac_cv_prog_LN_S'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
*) target_noncanonical=${target_alias} ;;
esac
- # Prefix 'build-' so this never conflicts with target_subdir.
+
+# post-stage1 host modules use a different CC_FOR_BUILD so, in order to
+# have matching libraries, they should use host libraries: Makefile.tpl
+# arranges to pass --with-build-libsubdir=$(HOST_SUBDIR).
+# However, they still use the build modules, because the corresponding
+# host modules (e.g. bison) are only built for the host when bootstrap
+# finishes. So:
+# - build_subdir is where we find build modules, and never changes.
+# - build_libsubdir is where we find build libraries, and can be overridden.
+
+# Prefix 'build-' so this never conflicts with target_subdir.
build_subdir="build-${build_noncanonical}"
+# Check whether --with-build-libsubdir or --without-build-libsubdir was given.
+if test "${with_build_libsubdir+set}" = set; then
+ withval="$with_build_libsubdir"
+ build_libsubdir="$withval"
+else
+ build_libsubdir="$build_subdir"
+fi
+
# --srcdir=. covers the toplevel, while "test -d" covers the subdirectories
if ( test $srcdir = . && test -d gcc ) \
|| test -d $srcdir/../host-${host_noncanonical}; then
fi
# No prefix.
target_subdir=${target_noncanonical}
-
+
# Skipdirs are removed silently.
skipdirs=
;;
i[3456789]86-*-mingw32*)
# noconfigdirs="tcl tk expect dejagnu make texinfo bison patch flex byacc send-pr uudecode dejagnu diff guile perl itcl gnuserv"
- noconfigdirs="$noconfigdirs expect dejagnu autoconf automake send-pr rcs guile perl texinfo libtool"
+ noconfigdirs="$noconfigdirs expect dejagnu autoconf automake send-pr rcs guile perl texinfo libtool newlib"
;;
i[3456789]86-*-beos*)
noconfigdirs="$noconfigdirs tk itcl libgui gdb"
# 'target-newlib' will appear in skipdirs.
;;
i[3456789]86-*-mingw32*)
- target_configdirs="$target_configdirs target-mingw"
- noconfigdirs="$noconfigdirs expect target-libgloss ${libgcj}"
-
- # Can't build gdb for mingw32 if not native.
- case "${host}" in
- i[3456789]86-*-mingw32) ;; # keep gdb tcl tk expect etc.
- *) noconfigdirs="$noconfigdirs gdb tcl tk expect itcl gnuserv"
- ;;
- esac
+ target_configdirs="$target_configdirs target-winsup"
+ noconfigdirs="$noconfigdirs expect target-libgloss target-newlib ${libgcj}"
;;
*-*-cygwin*)
target_configdirs="$target_configdirs target-libtermcap target-winsup"
noconfigdirs="$noconfigdirs target-gperf target-libgloss ${libgcj}"
# always build newlib if winsup directory is present.
- if test -d "$srcdir/winsup"; then
+ if test -d "$srcdir/winsup/cygwin"; then
skipdirs=`echo " ${skipdirs} " | sed -e 's/ target-newlib / /'`
elif test -d "$srcdir/newlib"; then
- echo "Warning: winsup is missing so newlib can't be built."
+ echo "Warning: winsup/cygwin is missing so newlib can't be built."
fi
-
- # Can't build gdb for Cygwin if not native.
- case "${host}" in
- *-*-cygwin*) ;; # keep gdb tcl tk expect etc.
- *) noconfigdirs="$noconfigdirs gdb tcl tk expect itcl libgui gnuserv"
- ;;
- esac
;;
i[3456789]86-moss-msdos | i[3456789]86-*-moss* | \
i[3456789]86-*-uwin* | i[3456789]86-*-interix* )
# <oldham@codesourcery.com>
noconfigdirs="$noconfigdirs gprof target-libgloss ${libgcj}"
;;
- mips*-dec-bsd*)
- noconfigdirs="$noconfigdirs gprof target-libgloss ${libgcj}"
- ;;
mips*-*-bsd*)
noconfigdirs="$noconfigdirs gprof target-libgloss ${libgcj}"
;;
- mipstx39-*-*)
- noconfigdirs="$noconfigdirs gprof ${libgcj}" # same as generic mips
- ;;
mips64*-*-linux*)
- noconfigdirs="$noconfigdirs target-newlib ${libgcj}"
+ noconfigdirs="$noconfigdirs target-newlib target-libgloss ${libgcj}"
;;
mips*-*-linux*)
noconfigdirs="$noconfigdirs target-newlib target-libgloss"
esac
# Disable languages that need other directories if these aren't available.
- for i in $subdir_requires .; do
- test -d gcc/$i && continue
+ for i in $subdir_requires; do
+ test -f "$srcdir/gcc/$i/config-lang.in" && continue
case ,${enable_languages}, in
*,${language},*)
# Specifically requested language; tell them.
esac
;;
esac
+case "$target" in
+*-mingw*)
+ # Can't be handled as Cygwin above since Mingw does not use newlib.
+ FLAGS_FOR_TARGET=$FLAGS_FOR_TARGET' -L$$r/$(TARGET_SUBDIR)/winsup/mingw -L$$r/$(TARGET_SUBDIR)/winsup/w32api/lib -isystem $$s/winsup/mingw/include -isystem $$s/winsup/w32api/include' ;;
+esac
# Allow the user to override the flags for
# our build compiler if desired.
# Extract the first word of "$ac_prog", so it can be a program name with args.
set dummy $ac_prog; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3445: checking for $ac_word" >&5
+echo "configure:3450: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_YACC'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "$ac_prog", so it can be a program name with args.
set dummy $ac_prog; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3485: checking for $ac_word" >&5
+echo "configure:3490: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_BISON'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "$ac_prog", so it can be a program name with args.
set dummy $ac_prog; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3524: checking for $ac_word" >&5
+echo "configure:3529: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_M4'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "$ac_prog", so it can be a program name with args.
set dummy $ac_prog; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3563: checking for $ac_word" >&5
+echo "configure:3568: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_LEX'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "$ac_prog", so it can be a program name with args.
set dummy $ac_prog; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3603: checking for $ac_word" >&5
+echo "configure:3608: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_FLEX'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "$ac_prog", so it can be a program name with args.
set dummy $ac_prog; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3642: checking for $ac_word" >&5
+echo "configure:3647: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_MAKEINFO'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "$ac_prog", so it can be a program name with args.
set dummy $ac_prog; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3695: checking for $ac_word" >&5
+echo "configure:3700: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_EXPECT'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "$ac_prog", so it can be a program name with args.
set dummy $ac_prog; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3736: checking for $ac_word" >&5
+echo "configure:3741: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_RUNTEST'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
case " $configdirs " in
*" dejagnu "*)
- test $host = $build && RUNTEST='$$r/$(HOST_SUBDIR)/dejagnu/runtest'
+ test $host = $build && RUNTEST='$$s/$(HOST_SUBDIR)/dejagnu/runtest'
;;
esac
# Extract the first word of "${ncn_tool_prefix}${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_tool_prefix}${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3784: checking for $ac_word" >&5
+echo "configure:3789: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_AR'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3815: checking for $ac_word" >&5
+echo "configure:3820: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_AR'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ncn_tool_prefix}${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_tool_prefix}${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3859: checking for $ac_word" >&5
+echo "configure:3864: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_AS'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3890: checking for $ac_word" >&5
+echo "configure:3895: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_AS'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ncn_tool_prefix}${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_tool_prefix}${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3934: checking for $ac_word" >&5
+echo "configure:3939: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_DLLTOOL'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3965: checking for $ac_word" >&5
+echo "configure:3970: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_DLLTOOL'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ncn_tool_prefix}${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_tool_prefix}${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4009: checking for $ac_word" >&5
+echo "configure:4014: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_LD'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4040: checking for $ac_word" >&5
+echo "configure:4045: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_LD'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ncn_tool_prefix}${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_tool_prefix}${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4084: checking for $ac_word" >&5
+echo "configure:4089: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_LIPO'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4115: checking for $ac_word" >&5
+echo "configure:4120: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_LIPO'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ncn_tool_prefix}${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_tool_prefix}${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4159: checking for $ac_word" >&5
+echo "configure:4164: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_NM'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4190: checking for $ac_word" >&5
+echo "configure:4195: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_NM'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ncn_tool_prefix}${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_tool_prefix}${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4234: checking for $ac_word" >&5
+echo "configure:4239: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4265: checking for $ac_word" >&5
+echo "configure:4270: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ncn_tool_prefix}${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_tool_prefix}${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4304: checking for $ac_word" >&5
+echo "configure:4309: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_STRIP'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4335: checking for $ac_word" >&5
+echo "configure:4340: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_STRIP'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ncn_tool_prefix}${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_tool_prefix}${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4374: checking for $ac_word" >&5
+echo "configure:4379: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_WINDRES'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4405: checking for $ac_word" >&5
+echo "configure:4410: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_WINDRES'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ncn_tool_prefix}${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_tool_prefix}${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4449: checking for $ac_word" >&5
+echo "configure:4454: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_OBJCOPY'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4480: checking for $ac_word" >&5
+echo "configure:4485: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_OBJCOPY'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ncn_tool_prefix}${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_tool_prefix}${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4524: checking for $ac_word" >&5
+echo "configure:4529: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_OBJDUMP'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4555: checking for $ac_word" >&5
+echo "configure:4560: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_OBJDUMP'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
if test -n "$with_build_time_tools"; then
for ncn_progname in cc gcc; do
echo $ac_n "checking for ${ncn_progname} in $with_build_time_tools""... $ac_c" 1>&6
-echo "configure:4619: checking for ${ncn_progname} in $with_build_time_tools" >&5
+echo "configure:4624: checking for ${ncn_progname} in $with_build_time_tools" >&5
if test -x $with_build_time_tools/${ncn_progname}; then
ac_cv_prog_CC_FOR_TARGET=$with_build_time_tools/${ncn_progname}
echo "$ac_t""yes" 1>&6
# Extract the first word of "${ncn_target_tool_prefix}${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_target_tool_prefix}${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4636: checking for $ac_word" >&5
+echo "configure:4641: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CC_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4667: checking for $ac_word" >&5
+echo "configure:4672: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CC_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
if test -n "$with_build_time_tools"; then
for ncn_progname in c++ g++ cxx gxx; do
echo $ac_n "checking for ${ncn_progname} in $with_build_time_tools""... $ac_c" 1>&6
-echo "configure:4710: checking for ${ncn_progname} in $with_build_time_tools" >&5
+echo "configure:4715: checking for ${ncn_progname} in $with_build_time_tools" >&5
if test -x $with_build_time_tools/${ncn_progname}; then
ac_cv_prog_CXX_FOR_TARGET=$with_build_time_tools/${ncn_progname}
echo "$ac_t""yes" 1>&6
# Extract the first word of "${ncn_target_tool_prefix}${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_target_tool_prefix}${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4727: checking for $ac_word" >&5
+echo "configure:4732: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CXX_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4758: checking for $ac_word" >&5
+echo "configure:4763: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CXX_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
if test -n "$with_build_time_tools"; then
for ncn_progname in gcc; do
echo $ac_n "checking for ${ncn_progname} in $with_build_time_tools""... $ac_c" 1>&6
-echo "configure:4801: checking for ${ncn_progname} in $with_build_time_tools" >&5
+echo "configure:4806: checking for ${ncn_progname} in $with_build_time_tools" >&5
if test -x $with_build_time_tools/${ncn_progname}; then
ac_cv_prog_GCC_FOR_TARGET=$with_build_time_tools/${ncn_progname}
echo "$ac_t""yes" 1>&6
# Extract the first word of "${ncn_target_tool_prefix}${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_target_tool_prefix}${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4818: checking for $ac_word" >&5
+echo "configure:4823: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_GCC_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4849: checking for $ac_word" >&5
+echo "configure:4854: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_GCC_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
if test -n "$with_build_time_tools"; then
for ncn_progname in gcj; do
echo $ac_n "checking for ${ncn_progname} in $with_build_time_tools""... $ac_c" 1>&6
-echo "configure:4887: checking for ${ncn_progname} in $with_build_time_tools" >&5
+echo "configure:4892: checking for ${ncn_progname} in $with_build_time_tools" >&5
if test -x $with_build_time_tools/${ncn_progname}; then
ac_cv_prog_GCJ_FOR_TARGET=$with_build_time_tools/${ncn_progname}
echo "$ac_t""yes" 1>&6
# Extract the first word of "${ncn_target_tool_prefix}${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_target_tool_prefix}${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4904: checking for $ac_word" >&5
+echo "configure:4909: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_GCJ_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4935: checking for $ac_word" >&5
+echo "configure:4940: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_GCJ_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
if test -n "$with_build_time_tools"; then
for ncn_progname in gfortran; do
echo $ac_n "checking for ${ncn_progname} in $with_build_time_tools""... $ac_c" 1>&6
-echo "configure:4978: checking for ${ncn_progname} in $with_build_time_tools" >&5
+echo "configure:4983: checking for ${ncn_progname} in $with_build_time_tools" >&5
if test -x $with_build_time_tools/${ncn_progname}; then
ac_cv_prog_GFORTRAN_FOR_TARGET=$with_build_time_tools/${ncn_progname}
echo "$ac_t""yes" 1>&6
# Extract the first word of "${ncn_target_tool_prefix}${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_target_tool_prefix}${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4995: checking for $ac_word" >&5
+echo "configure:5000: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_GFORTRAN_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:5026: checking for $ac_word" >&5
+echo "configure:5031: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_GFORTRAN_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
if test -z "$ac_cv_path_AR_FOR_TARGET" ; then
if test -n "$with_build_time_tools"; then
echo $ac_n "checking for ar in $with_build_time_tools""... $ac_c" 1>&6
-echo "configure:5133: checking for ar in $with_build_time_tools" >&5
+echo "configure:5138: checking for ar in $with_build_time_tools" >&5
if test -x $with_build_time_tools/ar; then
AR_FOR_TARGET=`cd $with_build_time_tools && pwd`/ar
ac_cv_path_AR_FOR_TARGET=$AR_FOR_TARGET
# Extract the first word of "ar", so it can be a program name with args.
set dummy ar; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:5151: checking for $ac_word" >&5
+echo "configure:5156: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_path_AR_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
if test -n "$with_build_time_tools"; then
for ncn_progname in ar; do
echo $ac_n "checking for ${ncn_progname} in $with_build_time_tools""... $ac_c" 1>&6
-echo "configure:5188: checking for ${ncn_progname} in $with_build_time_tools" >&5
+echo "configure:5193: checking for ${ncn_progname} in $with_build_time_tools" >&5
if test -x $with_build_time_tools/${ncn_progname}; then
ac_cv_prog_AR_FOR_TARGET=$with_build_time_tools/${ncn_progname}
echo "$ac_t""yes" 1>&6
# Extract the first word of "${ncn_target_tool_prefix}${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_target_tool_prefix}${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:5205: checking for $ac_word" >&5
+echo "configure:5210: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_AR_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:5236: checking for $ac_word" >&5
+echo "configure:5241: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_AR_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
if test -z "$ac_cv_path_AS_FOR_TARGET" ; then
if test -n "$with_build_time_tools"; then
echo $ac_n "checking for as in $with_build_time_tools""... $ac_c" 1>&6
-echo "configure:5286: checking for as in $with_build_time_tools" >&5
+echo "configure:5291: checking for as in $with_build_time_tools" >&5
if test -x $with_build_time_tools/as; then
AS_FOR_TARGET=`cd $with_build_time_tools && pwd`/as
ac_cv_path_AS_FOR_TARGET=$AS_FOR_TARGET
# Extract the first word of "as", so it can be a program name with args.
set dummy as; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:5304: checking for $ac_word" >&5
+echo "configure:5309: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_path_AS_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
if test -n "$with_build_time_tools"; then
for ncn_progname in as; do
echo $ac_n "checking for ${ncn_progname} in $with_build_time_tools""... $ac_c" 1>&6
-echo "configure:5341: checking for ${ncn_progname} in $with_build_time_tools" >&5
+echo "configure:5346: checking for ${ncn_progname} in $with_build_time_tools" >&5
if test -x $with_build_time_tools/${ncn_progname}; then
ac_cv_prog_AS_FOR_TARGET=$with_build_time_tools/${ncn_progname}
echo "$ac_t""yes" 1>&6
# Extract the first word of "${ncn_target_tool_prefix}${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_target_tool_prefix}${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:5358: checking for $ac_word" >&5
+echo "configure:5363: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_AS_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:5389: checking for $ac_word" >&5
+echo "configure:5394: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_AS_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
if test -z "$ac_cv_path_DLLTOOL_FOR_TARGET" ; then
if test -n "$with_build_time_tools"; then
echo $ac_n "checking for dlltool in $with_build_time_tools""... $ac_c" 1>&6
-echo "configure:5439: checking for dlltool in $with_build_time_tools" >&5
+echo "configure:5444: checking for dlltool in $with_build_time_tools" >&5
if test -x $with_build_time_tools/dlltool; then
DLLTOOL_FOR_TARGET=`cd $with_build_time_tools && pwd`/dlltool
ac_cv_path_DLLTOOL_FOR_TARGET=$DLLTOOL_FOR_TARGET
# Extract the first word of "dlltool", so it can be a program name with args.
set dummy dlltool; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:5457: checking for $ac_word" >&5
+echo "configure:5462: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_path_DLLTOOL_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
if test -n "$with_build_time_tools"; then
for ncn_progname in dlltool; do
echo $ac_n "checking for ${ncn_progname} in $with_build_time_tools""... $ac_c" 1>&6
-echo "configure:5494: checking for ${ncn_progname} in $with_build_time_tools" >&5
+echo "configure:5499: checking for ${ncn_progname} in $with_build_time_tools" >&5
if test -x $with_build_time_tools/${ncn_progname}; then
ac_cv_prog_DLLTOOL_FOR_TARGET=$with_build_time_tools/${ncn_progname}
echo "$ac_t""yes" 1>&6
# Extract the first word of "${ncn_target_tool_prefix}${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_target_tool_prefix}${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:5511: checking for $ac_word" >&5
+echo "configure:5516: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_DLLTOOL_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:5542: checking for $ac_word" >&5
+echo "configure:5547: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_DLLTOOL_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
if test -z "$ac_cv_path_LD_FOR_TARGET" ; then
if test -n "$with_build_time_tools"; then
echo $ac_n "checking for ld in $with_build_time_tools""... $ac_c" 1>&6
-echo "configure:5592: checking for ld in $with_build_time_tools" >&5
+echo "configure:5597: checking for ld in $with_build_time_tools" >&5
if test -x $with_build_time_tools/ld; then
LD_FOR_TARGET=`cd $with_build_time_tools && pwd`/ld
ac_cv_path_LD_FOR_TARGET=$LD_FOR_TARGET
# Extract the first word of "ld", so it can be a program name with args.
set dummy ld; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:5610: checking for $ac_word" >&5
+echo "configure:5615: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_path_LD_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
if test -n "$with_build_time_tools"; then
for ncn_progname in ld; do
echo $ac_n "checking for ${ncn_progname} in $with_build_time_tools""... $ac_c" 1>&6
-echo "configure:5647: checking for ${ncn_progname} in $with_build_time_tools" >&5
+echo "configure:5652: checking for ${ncn_progname} in $with_build_time_tools" >&5
if test -x $with_build_time_tools/${ncn_progname}; then
ac_cv_prog_LD_FOR_TARGET=$with_build_time_tools/${ncn_progname}
echo "$ac_t""yes" 1>&6
# Extract the first word of "${ncn_target_tool_prefix}${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_target_tool_prefix}${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:5664: checking for $ac_word" >&5
+echo "configure:5669: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_LD_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:5695: checking for $ac_word" >&5
+echo "configure:5700: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_LD_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
if test -z "$ac_cv_path_LIPO_FOR_TARGET" ; then
if test -n "$with_build_time_tools"; then
echo $ac_n "checking for lipo in $with_build_time_tools""... $ac_c" 1>&6
-echo "configure:5745: checking for lipo in $with_build_time_tools" >&5
+echo "configure:5750: checking for lipo in $with_build_time_tools" >&5
if test -x $with_build_time_tools/lipo; then
LIPO_FOR_TARGET=`cd $with_build_time_tools && pwd`/lipo
ac_cv_path_LIPO_FOR_TARGET=$LIPO_FOR_TARGET
# Extract the first word of "lipo", so it can be a program name with args.
set dummy lipo; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:5763: checking for $ac_word" >&5
+echo "configure:5768: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_path_LIPO_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
if test -n "$with_build_time_tools"; then
for ncn_progname in lipo; do
echo $ac_n "checking for ${ncn_progname} in $with_build_time_tools""... $ac_c" 1>&6
-echo "configure:5800: checking for ${ncn_progname} in $with_build_time_tools" >&5
+echo "configure:5805: checking for ${ncn_progname} in $with_build_time_tools" >&5
if test -x $with_build_time_tools/${ncn_progname}; then
ac_cv_prog_LIPO_FOR_TARGET=$with_build_time_tools/${ncn_progname}
echo "$ac_t""yes" 1>&6
# Extract the first word of "${ncn_target_tool_prefix}${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_target_tool_prefix}${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:5817: checking for $ac_word" >&5
+echo "configure:5822: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_LIPO_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:5848: checking for $ac_word" >&5
+echo "configure:5853: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_LIPO_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
if test -z "$ac_cv_path_NM_FOR_TARGET" ; then
if test -n "$with_build_time_tools"; then
echo $ac_n "checking for nm in $with_build_time_tools""... $ac_c" 1>&6
-echo "configure:5898: checking for nm in $with_build_time_tools" >&5
+echo "configure:5903: checking for nm in $with_build_time_tools" >&5
if test -x $with_build_time_tools/nm; then
NM_FOR_TARGET=`cd $with_build_time_tools && pwd`/nm
ac_cv_path_NM_FOR_TARGET=$NM_FOR_TARGET
# Extract the first word of "nm", so it can be a program name with args.
set dummy nm; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:5916: checking for $ac_word" >&5
+echo "configure:5921: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_path_NM_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
if test -n "$with_build_time_tools"; then
for ncn_progname in nm; do
echo $ac_n "checking for ${ncn_progname} in $with_build_time_tools""... $ac_c" 1>&6
-echo "configure:5953: checking for ${ncn_progname} in $with_build_time_tools" >&5
+echo "configure:5958: checking for ${ncn_progname} in $with_build_time_tools" >&5
if test -x $with_build_time_tools/${ncn_progname}; then
ac_cv_prog_NM_FOR_TARGET=$with_build_time_tools/${ncn_progname}
echo "$ac_t""yes" 1>&6
# Extract the first word of "${ncn_target_tool_prefix}${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_target_tool_prefix}${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:5970: checking for $ac_word" >&5
+echo "configure:5975: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_NM_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:6001: checking for $ac_word" >&5
+echo "configure:6006: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_NM_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
if test -z "$ac_cv_path_OBJDUMP_FOR_TARGET" ; then
if test -n "$with_build_time_tools"; then
echo $ac_n "checking for objdump in $with_build_time_tools""... $ac_c" 1>&6
-echo "configure:6051: checking for objdump in $with_build_time_tools" >&5
+echo "configure:6056: checking for objdump in $with_build_time_tools" >&5
if test -x $with_build_time_tools/objdump; then
OBJDUMP_FOR_TARGET=`cd $with_build_time_tools && pwd`/objdump
ac_cv_path_OBJDUMP_FOR_TARGET=$OBJDUMP_FOR_TARGET
# Extract the first word of "objdump", so it can be a program name with args.
set dummy objdump; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:6069: checking for $ac_word" >&5
+echo "configure:6074: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_path_OBJDUMP_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
if test -n "$with_build_time_tools"; then
for ncn_progname in objdump; do
echo $ac_n "checking for ${ncn_progname} in $with_build_time_tools""... $ac_c" 1>&6
-echo "configure:6106: checking for ${ncn_progname} in $with_build_time_tools" >&5
+echo "configure:6111: checking for ${ncn_progname} in $with_build_time_tools" >&5
if test -x $with_build_time_tools/${ncn_progname}; then
ac_cv_prog_OBJDUMP_FOR_TARGET=$with_build_time_tools/${ncn_progname}
echo "$ac_t""yes" 1>&6
# Extract the first word of "${ncn_target_tool_prefix}${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_target_tool_prefix}${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:6123: checking for $ac_word" >&5
+echo "configure:6128: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_OBJDUMP_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:6154: checking for $ac_word" >&5
+echo "configure:6159: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_OBJDUMP_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
if test -z "$ac_cv_path_RANLIB_FOR_TARGET" ; then
if test -n "$with_build_time_tools"; then
echo $ac_n "checking for ranlib in $with_build_time_tools""... $ac_c" 1>&6
-echo "configure:6204: checking for ranlib in $with_build_time_tools" >&5
+echo "configure:6209: checking for ranlib in $with_build_time_tools" >&5
if test -x $with_build_time_tools/ranlib; then
RANLIB_FOR_TARGET=`cd $with_build_time_tools && pwd`/ranlib
ac_cv_path_RANLIB_FOR_TARGET=$RANLIB_FOR_TARGET
# Extract the first word of "ranlib", so it can be a program name with args.
set dummy ranlib; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:6222: checking for $ac_word" >&5
+echo "configure:6227: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_path_RANLIB_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
if test -n "$with_build_time_tools"; then
for ncn_progname in ranlib; do
echo $ac_n "checking for ${ncn_progname} in $with_build_time_tools""... $ac_c" 1>&6
-echo "configure:6259: checking for ${ncn_progname} in $with_build_time_tools" >&5
+echo "configure:6264: checking for ${ncn_progname} in $with_build_time_tools" >&5
if test -x $with_build_time_tools/${ncn_progname}; then
ac_cv_prog_RANLIB_FOR_TARGET=$with_build_time_tools/${ncn_progname}
echo "$ac_t""yes" 1>&6
# Extract the first word of "${ncn_target_tool_prefix}${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_target_tool_prefix}${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:6276: checking for $ac_word" >&5
+echo "configure:6281: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_RANLIB_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:6307: checking for $ac_word" >&5
+echo "configure:6312: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_RANLIB_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
if test -z "$ac_cv_path_STRIP_FOR_TARGET" ; then
if test -n "$with_build_time_tools"; then
echo $ac_n "checking for strip in $with_build_time_tools""... $ac_c" 1>&6
-echo "configure:6357: checking for strip in $with_build_time_tools" >&5
+echo "configure:6362: checking for strip in $with_build_time_tools" >&5
if test -x $with_build_time_tools/strip; then
STRIP_FOR_TARGET=`cd $with_build_time_tools && pwd`/strip
ac_cv_path_STRIP_FOR_TARGET=$STRIP_FOR_TARGET
# Extract the first word of "strip", so it can be a program name with args.
set dummy strip; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:6375: checking for $ac_word" >&5
+echo "configure:6380: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_path_STRIP_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
if test -n "$with_build_time_tools"; then
for ncn_progname in strip; do
echo $ac_n "checking for ${ncn_progname} in $with_build_time_tools""... $ac_c" 1>&6
-echo "configure:6412: checking for ${ncn_progname} in $with_build_time_tools" >&5
+echo "configure:6417: checking for ${ncn_progname} in $with_build_time_tools" >&5
if test -x $with_build_time_tools/${ncn_progname}; then
ac_cv_prog_STRIP_FOR_TARGET=$with_build_time_tools/${ncn_progname}
echo "$ac_t""yes" 1>&6
# Extract the first word of "${ncn_target_tool_prefix}${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_target_tool_prefix}${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:6429: checking for $ac_word" >&5
+echo "configure:6434: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_STRIP_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:6460: checking for $ac_word" >&5
+echo "configure:6465: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_STRIP_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
if test -z "$ac_cv_path_WINDRES_FOR_TARGET" ; then
if test -n "$with_build_time_tools"; then
echo $ac_n "checking for windres in $with_build_time_tools""... $ac_c" 1>&6
-echo "configure:6510: checking for windres in $with_build_time_tools" >&5
+echo "configure:6515: checking for windres in $with_build_time_tools" >&5
if test -x $with_build_time_tools/windres; then
WINDRES_FOR_TARGET=`cd $with_build_time_tools && pwd`/windres
ac_cv_path_WINDRES_FOR_TARGET=$WINDRES_FOR_TARGET
# Extract the first word of "windres", so it can be a program name with args.
set dummy windres; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:6528: checking for $ac_word" >&5
+echo "configure:6533: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_path_WINDRES_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
if test -n "$with_build_time_tools"; then
for ncn_progname in windres; do
echo $ac_n "checking for ${ncn_progname} in $with_build_time_tools""... $ac_c" 1>&6
-echo "configure:6565: checking for ${ncn_progname} in $with_build_time_tools" >&5
+echo "configure:6570: checking for ${ncn_progname} in $with_build_time_tools" >&5
if test -x $with_build_time_tools/${ncn_progname}; then
ac_cv_prog_WINDRES_FOR_TARGET=$with_build_time_tools/${ncn_progname}
echo "$ac_t""yes" 1>&6
# Extract the first word of "${ncn_target_tool_prefix}${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_target_tool_prefix}${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:6582: checking for $ac_word" >&5
+echo "configure:6587: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_WINDRES_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ncn_progname}", so it can be a program name with args.
set dummy ${ncn_progname}; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:6613: checking for $ac_word" >&5
+echo "configure:6618: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_WINDRES_FOR_TARGET'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
RAW_CXX_FOR_TARGET="$CXX_FOR_TARGET"
echo $ac_n "checking where to find the target ar""... $ac_c" 1>&6
-echo "configure:6661: checking where to find the target ar" >&5
+echo "configure:6666: checking where to find the target ar" >&5
if test "x${build}" != "x${host}" ; then
if expr "x$AR_FOR_TARGET" : "x/" > /dev/null; then
# We already found the complete path
fi
fi
echo $ac_n "checking where to find the target as""... $ac_c" 1>&6
-echo "configure:6694: checking where to find the target as" >&5
+echo "configure:6699: checking where to find the target as" >&5
if test "x${build}" != "x${host}" ; then
if expr "x$AS_FOR_TARGET" : "x/" > /dev/null; then
# We already found the complete path
fi
fi
echo $ac_n "checking where to find the target cc""... $ac_c" 1>&6
-echo "configure:6727: checking where to find the target cc" >&5
+echo "configure:6732: checking where to find the target cc" >&5
if test "x${build}" != "x${host}" ; then
if expr "x$CC_FOR_TARGET" : "x/" > /dev/null; then
# We already found the complete path
fi
fi
echo $ac_n "checking where to find the target c++""... $ac_c" 1>&6
-echo "configure:6760: checking where to find the target c++" >&5
+echo "configure:6765: checking where to find the target c++" >&5
if test "x${build}" != "x${host}" ; then
if expr "x$CXX_FOR_TARGET" : "x/" > /dev/null; then
# We already found the complete path
fi
fi
echo $ac_n "checking where to find the target c++ for libstdc++""... $ac_c" 1>&6
-echo "configure:6796: checking where to find the target c++ for libstdc++" >&5
+echo "configure:6801: checking where to find the target c++ for libstdc++" >&5
if test "x${build}" != "x${host}" ; then
if expr "x$RAW_CXX_FOR_TARGET" : "x/" > /dev/null; then
# We already found the complete path
fi
fi
echo $ac_n "checking where to find the target dlltool""... $ac_c" 1>&6
-echo "configure:6832: checking where to find the target dlltool" >&5
+echo "configure:6837: checking where to find the target dlltool" >&5
if test "x${build}" != "x${host}" ; then
if expr "x$DLLTOOL_FOR_TARGET" : "x/" > /dev/null; then
# We already found the complete path
fi
fi
echo $ac_n "checking where to find the target gcc""... $ac_c" 1>&6
-echo "configure:6865: checking where to find the target gcc" >&5
+echo "configure:6870: checking where to find the target gcc" >&5
if test "x${build}" != "x${host}" ; then
if expr "x$GCC_FOR_TARGET" : "x/" > /dev/null; then
# We already found the complete path
fi
fi
echo $ac_n "checking where to find the target gcj""... $ac_c" 1>&6
-echo "configure:6898: checking where to find the target gcj" >&5
+echo "configure:6903: checking where to find the target gcj" >&5
if test "x${build}" != "x${host}" ; then
if expr "x$GCJ_FOR_TARGET" : "x/" > /dev/null; then
# We already found the complete path
fi
fi
echo $ac_n "checking where to find the target gfortran""... $ac_c" 1>&6
-echo "configure:6934: checking where to find the target gfortran" >&5
+echo "configure:6939: checking where to find the target gfortran" >&5
if test "x${build}" != "x${host}" ; then
if expr "x$GFORTRAN_FOR_TARGET" : "x/" > /dev/null; then
# We already found the complete path
fi
fi
echo $ac_n "checking where to find the target ld""... $ac_c" 1>&6
-echo "configure:6970: checking where to find the target ld" >&5
+echo "configure:6975: checking where to find the target ld" >&5
if test "x${build}" != "x${host}" ; then
if expr "x$LD_FOR_TARGET" : "x/" > /dev/null; then
# We already found the complete path
fi
fi
echo $ac_n "checking where to find the target lipo""... $ac_c" 1>&6
-echo "configure:7003: checking where to find the target lipo" >&5
+echo "configure:7008: checking where to find the target lipo" >&5
if test "x${build}" != "x${host}" ; then
if expr "x$LIPO_FOR_TARGET" : "x/" > /dev/null; then
# We already found the complete path
fi
fi
echo $ac_n "checking where to find the target nm""... $ac_c" 1>&6
-echo "configure:7026: checking where to find the target nm" >&5
+echo "configure:7031: checking where to find the target nm" >&5
if test "x${build}" != "x${host}" ; then
if expr "x$NM_FOR_TARGET" : "x/" > /dev/null; then
# We already found the complete path
fi
fi
echo $ac_n "checking where to find the target objdump""... $ac_c" 1>&6
-echo "configure:7059: checking where to find the target objdump" >&5
+echo "configure:7064: checking where to find the target objdump" >&5
if test "x${build}" != "x${host}" ; then
if expr "x$OBJDUMP_FOR_TARGET" : "x/" > /dev/null; then
# We already found the complete path
fi
fi
echo $ac_n "checking where to find the target ranlib""... $ac_c" 1>&6
-echo "configure:7092: checking where to find the target ranlib" >&5
+echo "configure:7097: checking where to find the target ranlib" >&5
if test "x${build}" != "x${host}" ; then
if expr "x$RANLIB_FOR_TARGET" : "x/" > /dev/null; then
# We already found the complete path
fi
fi
echo $ac_n "checking where to find the target strip""... $ac_c" 1>&6
-echo "configure:7125: checking where to find the target strip" >&5
+echo "configure:7130: checking where to find the target strip" >&5
if test "x${build}" != "x${host}" ; then
if expr "x$STRIP_FOR_TARGET" : "x/" > /dev/null; then
# We already found the complete path
fi
fi
echo $ac_n "checking where to find the target windres""... $ac_c" 1>&6
-echo "configure:7158: checking where to find the target windres" >&5
+echo "configure:7163: checking where to find the target windres" >&5
if test "x${build}" != "x${host}" ; then
if expr "x$WINDRES_FOR_TARGET" : "x/" > /dev/null; then
# We already found the complete path
echo $ac_n "checking whether to enable maintainer-specific portions of Makefiles""... $ac_c" 1>&6
-echo "configure:7219: checking whether to enable maintainer-specific portions of Makefiles" >&5
+echo "configure:7224: checking whether to enable maintainer-specific portions of Makefiles" >&5
# Check whether --enable-maintainer-mode or --disable-maintainer-mode was given.
if test "${enable_maintainer_mode+set}" = set; then
enableval="$enable_maintainer_mode"
;;
esac
+# This is aimed to mimic bootstrap with a non-GCC compiler to catch problems.
+if test "$GCC" = yes; then
+ saved_CFLAGS="$CFLAGS"
+
+ # Pass -fkeep-inline-functions for stage 1 if the GCC version supports it.
+ CFLAGS="$CFLAGS -fkeep-inline-functions"
+ echo $ac_n "checking whether -fkeep-inline-functions is supported""... $ac_c" 1>&6
+echo "configure:7273: checking whether -fkeep-inline-functions is supported" >&5
+ cat > conftest.$ac_ext <<EOF
+#line 7275 "configure"
+#include "confdefs.h"
+
+int main() {
+
+; return 0; }
+EOF
+if { (eval echo configure:7282: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+ rm -rf conftest*
+ echo "$ac_t""yes" 1>&6; stage1_cflags="$stage1_cflags -fkeep-inline-functions"
+else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ echo "$ac_t""no" 1>&6
+fi
+rm -f conftest*
+
+ CFLAGS="$saved_CFLAGS"
+fi
+
+
# Enable -Werror in bootstrap stage2 and later.
# Change the default to "no" on release branches.
s%@LN@%$LN%g
s%@LN_S@%$LN_S%g
s%@TOPLEVEL_CONFIGURE_ARGUMENTS@%$TOPLEVEL_CONFIGURE_ARGUMENTS%g
+s%@build_libsubdir@%$build_libsubdir%g
s%@build_subdir@%$build_subdir%g
s%@host_subdir@%$host_subdir%g
s%@target_subdir@%$target_subdir%g