### WARNING: this file contains embedded tabs. Do not run untabify on this file.
# Configuration script
-# Copyright (C) 1988, 90, 91, 92, 93, 94, 95, 96, 1997
+# Copyright (C) 1988, 90, 91, 92, 93, 94, 95, 96, 97, 98, 1999
# Free Software Foundation, Inc.
# This program is free software; you can redistribute it and/or modify
esac
enableopt=`echo ${option} | sed 's:^--::;s:=.*$::;s:-:_:g'`
- eval "$enableopt='$optarg'"
+ eval "$enableopt=\$optarg"
enableoptions="$enableoptions '$option'"
;;
--exec-prefix* | --ex*)
esac
withopt=`echo ${option} | sed 's:^--::;s:=.*$::;s:-:_:g'`
- eval $withopt="$optarg"
+ eval $withopt="\$optarg"
withoptions="$withoptions $option"
;;
--without-*)
fi
;;
esac
- echo "Configuring for a ${host_alias} host." 1>&2
+ echo "Configuring for a ${host_alias} host."
arguments="--host=$host_alias $arguments"
else
echo 'Config.guess failed to determine the host type. You need to specify one.' 1>&2
configsub=`echo ${progname} | sed 's/configure$/config.sub/'`
moveifchange=`echo ${progname} | sed 's/configure$/move-if-change/'`
-topsrcdir=`cd \`dirname ${progname}\`; pwd`
+## the sed command below emulates the dirname command
+topsrcdir=`cd \`echo ${progname} | sed -e 's,[^/]*$,,;s,/$,,;s,^$,.,'\`; pwd`
# this is a hack. sun4 must always be a valid host alias or this will fail.
fi
esac
-# start-sanitize-cygnus
-# Don't allow builds at Cygnus to be done with srcdir==builddir. We
-# can assume srcdir==. in this case, because of code above.
-if test "$srcdir" = .; then
- echo '***' "Cannot configure in source tree." >&2
- echo '***' "Make a parallel directory and configure there." >&2
- exit 1
-fi
-# end-sanitize-cygnus
-
# default exec_prefix
case "${exec_prefixoption}" in
"") exec_prefix="\$(prefix)" ;;
# the gcc version number changes.
if [ "${with_gcc_version_trigger+set}" = set ]; then
gcc_version_trigger="$with_gcc_version_trigger"
- gcc_version=`sed -e 's/.*\"\([^ \"]*\)[ \"].*/\1/' < ${with_gcc_version_trigger}`
+ gcc_version=`grep version_string ${with_gcc_version_trigger} | sed -e 's/.*\"\([^ \"]*\)[ \"].*/\1/'`
else
# If gcc's sources are available, define the trigger file.
if [ -f ${topsrcdir}/gcc/version.c ] ; then
gcc_version_trigger=${topsrcdir}/gcc/version.c
- gcc_version=`sed -e 's/.*\"\([^ \"]*\)[ \"].*/\1/' < ${gcc_version_trigger}`
+ gcc_version=`grep version_string ${gcc_version_trigger} | sed -e 's/.*\"\([^ \"]*\)[ \"].*/\1/'`
case "$arguments" in
*--with-gcc-version-trigger=$gcc_version_trigger* )
;;
*) ;;
esac
-# keep this filename short for &%*%$*# 14 char file names
-tmpfile=${TMPDIR}/cONf$$
+# keep this filename short for &%*%$*# 14 char file names and 8+3 file names
+tmpfile=${TMPDIR}/cNf$$
# Note that under many versions of sh a trap handler for 0 will *override* any
# exit status you explicitly specify! At this point, the only non-error exit
# is at the end of the script; these actions are duplicated there, minus
### do common part of configure.in
+# If the language specific compiler does not exist, but the "gcc" directory does,
+# we will skip this directory; in this case the sub-directory's common part
+# of configure.in will create a small shell script "skip-this-dir" containing
+# commands to completely clean up any temporary or created files.
+
. ${tmpfile}.com
+if test -f skip-this-dir; then
+ # Perform the same cleanup as the trap handler, minus the "exit 1" of course,
+ # and reset the trap handler.
+ trap 0
+ rm -f Makefile* ${tmpfile}.com ${tmpfile}.tgt ${tmpfile}.hst ${tmpfile}.pos
+ # Execute the final clean-up actions
+ ${config_shell} skip-this-dir
+ # and stop configuring this directory.
+ exit 0
+fi
+
# some sanity checks on configure.in
case "${srctrigger}" in
"")
tools="${tools} HOST_PREFIX_1 LD LD_FOR_TARGET LEX MAKEINFO NM"
tools="${tools} NM_FOR_TARGET RANLIB RANLIB_FOR_TARGET"
tools="${tools} WINDRES WINDRES_FOR_TARGET YACC"
+ tools="${tools} OBJCOPY OBJDUMP"
for var in ${tools}; do
- if [ -z "`eval 'echo $'"${var}"`" ] && [ -r Makefile ]; then
+ if eval [ -z \"\$${var}\" ] && [ -r Makefile ]; then
sed -n -e ':loop
/\\$/ N
s/\\\n//g
< Makefile > Makefile.v
t=`tail -1 Makefile.v`
if [ -n "${t}" ]; then
- eval "${var}='${t}'"
+ eval "${var}=\${t}"
fi
rm -f Makefile.v
fi
RANLIB_FOR_TARGET=${RANLIB_FOR_TARGET-${target_alias}-ranlib}
WINDRES=${WINDRES-${host_alias}-windres}
WINDRES_FOR_TARGET=${WINDRES_FOR_TARGET-${target_alias}-windres}
+ OBJCOPY=${OBJCOPY-${host_alias}-objcopy}
+ OBJDUMP=${OBJDUMP-${host_alias}-objdump}
if [ -z "${YACC}" ]; then
IFS="${IFS= }"; save_ifs="$IFS"; IFS="${IFS}:"
export NM
export RANLIB
export WINDRES
+ export OBJCOPY
+ export OBJDUMP
else
# If CC is still not set, try to get gcc.
if [ -z "${CC}" ]; then
export CFLAGS
export CXXFLAGS
-# start-sanitize-gdbtk
# FIXME: This should be in configure.in, not configure
case "$host" in
*go32*)
# Determine whether gdb needs tk/tcl or not.
if [ "$enable_gdbtk" != "no" ]; then
GDB_TK="all-tcl all-tk all-itcl all-tix all-libgui"
- # start-sanitize-ide
- if [ "$enable_ide" = "yes" ]; then
- GDB_TK="all-tcl all-tk all-itcl all-tix all-libgui all-libide all-libidetcl"
- fi
- # end-sanitize-ide
else
GDB_TK=""
fi
-# end-sanitize-gdbtk
for subdir in . ${subdirs} ; do
echo site_makefile_frag = ${invsubdir}${site_makefile_frag} >>${Makefile}
fi
- # provide a proper gxx_include_dir to all subdirs.
- # Note, if you change the default, make sure to fix both here
- # and in the gcc subdirectory.
- # Check whether --with-gxx-include-dir or --without-gxx-include-dir was given.
- gxx_include_dir=
- if test -n "${with_gxx_include_dir}"; then
- case "${with_gxx_include_dir}" in
- yes )
- echo "configure: error: bad value ${withval} given for g++ include directory" 1>&2
- exit 1
- ;;
- no )
- ;;
- * )
- gxx_include_dir=${with_gxx_include_dir}
- ;;
- esac
- fi
- if test x${gxx_include_dir} = x; then
- if test x${enable_version_specific_runtime_libs} = xyes; then
- echo gxx_include_dir = '${libsubdir}/include/g++' >> ${Makefile}
- else
- . ${topsrcdir}/config.if
- echo gxx_include_dir = '${prefix}/include/g++'-${libstdcxx_interface} >> ${Makefile}
- fi
- else
- echo gxx_include_dir = ${gxx_include_dir} >> ${Makefile}
- fi
-
# record if we want to build shared libs.
if test -z "${enable_shared}"; then
echo enable_shared = no >> ${Makefile}
-e "s:^program_suffix[ ]*=.*$:program_suffix = ${program_suffix}:" \
-e "s:^program_transform_name[ ]*=.*$:program_transform_name = ${program_transform_name}:" \
-e "s|^tooldir[ ]*=.*$|tooldir = ${tooldir}|" \
+ -e "s|^build_tooldir[ ]*=.*$|build_tooldir = ${tooldir}|" \
-e "s:^DEFAULT_YACC[ ]*=.*$:DEFAULT_YACC = ${DEFAULT_YACC}:" \
-e "s:^DEFAULT_LEX[ ]*=.*$:DEFAULT_LEX = ${DEFAULT_LEX}:" \
-e "s:^DEFAULT_M4[ ]*=.*$:DEFAULT_M4 = ${DEFAULT_M4}:" \
${subdir}/Makefile.tem >> ${Makefile}
- # start-sanitize-gdbtk
sed -e "s:^GDB_TK[ ]*=.*$:GDB_TK = ${GDB_TK}:" ${Makefile} >${Makefile}.tem
mv -f ${Makefile}.tem ${Makefile}
- # end-sanitize-gdbtk
# If this is a Canadian Cross, preset the values of many more
# tools.
if [ "${build}" != "${host}" ]; then
for var in ${tools}; do
- val=`eval 'echo $'"${var}"`
+ eval val=\$${var}
sed -e "/^${var}[ ]*=/{
:loop1
/\\\\$/ N
projects / deliverable / binutils-gdb.git / blobdiff