hppa*64*-*-*)
noconfigdirs="$noconfigdirs byacc"
;;
- i[[3456789]]86-*-vsta)
- noconfigdirs="$noconfigdirs tcl expect dejagnu make texinfo bison patch flex byacc send-pr gprof uudecode dejagnu diff guile perl itcl gnuserv gettext"
- ;;
- i[[3456789]]86-*-go32* | i[[3456789]]86-*-msdosdjgpp*)
+ i[[3456789]]86-*-msdosdjgpp*)
noconfigdirs="$noconfigdirs tcl tk expect dejagnu send-pr uudecode guile itcl gnuserv libffi"
;;
x86_64-*-mingw*)
# noconfigdirs="tcl tk expect dejagnu make texinfo bison patch flex byacc send-pr uudecode dejagnu diff guile perl itcl gnuserv"
noconfigdirs="$noconfigdirs expect dejagnu autoconf automake send-pr rcs guile perl texinfo libtool newlib"
;;
- i[[3456789]]86-*-beos*)
- noconfigdirs="$noconfigdirs tk itcl libgui gdb"
- ;;
*-*-cygwin*)
noconfigdirs="$noconfigdirs autoconf automake send-pr rcs guile perl"
;;
*-*-netbsd*)
noconfigdirs="$noconfigdirs rcs"
;;
- ppc*-*-pe)
- noconfigdirs="$noconfigdirs patch diff make tk tcl expect dejagnu autoconf automake texinfo bison send-pr gprof rcs guile perl itcl gnuserv"
- ;;
- powerpc-*-beos*)
- noconfigdirs="$noconfigdirs tk itcl libgui gdb dejagnu readline"
- ;;
esac
libgloss_dir=wince
;;
arc-*-*)
- noconfigdirs="$noconfigdirs target-libgloss ${libgcj}"
- ;;
- arm-semi-aof )
+ noconfigdirs="$noconfigdirs target-libgloss"
;;
- arm-*-coff | strongarm-*-coff | xscale-*-coff)
+ arm-*-coff)
noconfigdirs="$noconfigdirs ${libgcj}"
libgloss_dir=arm
;;
- arm-*-elf* | strongarm-*-elf* | xscale-*-elf* | arm*-*-eabi* )
+ arm-*-elf* | arm*-*-eabi* )
noconfigdirs="$noconfigdirs target-libffi target-qthreads"
libgloss_dir=arm
;;
arm-*-pe*)
noconfigdirs="$noconfigdirs target-libgloss ${libgcj}"
;;
- thumb-*-coff)
- noconfigdirs="$noconfigdirs target-libgloss ${libgcj}"
- ;;
- thumb-*-elf)
- noconfigdirs="$noconfigdirs target-libgloss ${libgcj}"
- ;;
- thumb-*-pe)
- noconfigdirs="$noconfigdirs target-libgloss ${libgcj}"
- ;;
arm-*-riscix*)
noconfigdirs="$noconfigdirs ld target-libgloss ${libgcj}"
;;
esac
libgloss_dir=cris
;;
- crx-*-*)
- noconfigdirs="$noconfigdirs target-libstdc++-v3 target-mudflap ${libgcj}"
- ;;
d10v-*-*)
noconfigdirs="$noconfigdirs target-libstdc++-v3 target-libgloss ${libgcj}"
;;
d30v-*-*)
noconfigdirs="$noconfigdirs ${libgcj} gdb"
;;
- ep9312-*-elf | ep9312-*-coff)
- libgloss_dir=arm
- ;;
fr30-*-elf*)
noconfigdirs="$noconfigdirs ${libgcj} gdb"
;;
;;
hppa1.1-*-osf* | hppa1.1-*-bsd* )
;;
- hppa*64*-*-linux* | parisc*64*-*-linux*)
+ hppa*64*-*-linux*)
# In this case, it's because the hppa64-linux target is for
# the kernel only at this point and has no libc, and thus no
# headers, crt*.o, etc., all of which are needed by these.
noconfigdirs="$noconfigdirs target-zlib"
;;
- parisc*-*-linux* | hppa*-*-linux*)
+ hppa*-*-linux*)
;;
hppa*-*-*elf* | \
hppa*-*-lites* | \
# No gdb or ld support yet.
noconfigdirs="$noconfigdirs ${libgcj} tix readline mmalloc libgui itcl gdb ld"
;;
- i370-*-opened*)
- ;;
i[[3456789]]86-*-coff | i[[3456789]]86-*-elf)
noconfigdirs="$noconfigdirs ${libgcj}"
libgloss_dir=i386
echo "Warning: winsup/cygwin is missing so newlib can't be built."
fi
;;
- i[[3456789]]86-moss-msdos | i[[3456789]]86-*-moss* | \
- i[[3456789]]86-*-uwin* | i[[3456789]]86-*-interix* )
+ i[[3456789]]86-*-interix* )
;;
i[[3456789]]86-*-pe)
- noconfigdirs="$noconfigdirs target-libstdc++-v3 target-libgloss ${libgcj}"
+ noconfigdirs="$noconfigdirs target-libgloss"
;;
i[[3456789]]86-*-sco3.2v5*)
# The linker does not yet know about weak symbols in COFF,
noconfigdirs="$noconfigdirs ${libgcj}"
;;
m68hc11-*-*|m6811-*-*|m68hc12-*-*|m6812-*-*)
- noconfigdirs="$noconfigdirs target-libiberty target-libstdc++-v3 ${libgcj}"
+ noconfigdirs="$noconfigdirs target-libiberty"
libgloss_dir=m68hc11
;;
m68k-*-elf*)
m68*-*-* | fido-*-*)
libgloss_dir=m68k
;;
- mcore-*-pe*)
- # The EPOC C++ environment does not support exceptions or rtti,
- # and so building libstdc++-v3 tends not to always work.
- noconfigdirs="$noconfigdirs target-libstdc++-v3"
- ;;
mmix-*-*)
noconfigdirs="$noconfigdirs target-libffi target-boehm-gc gdb libgloss"
unsupported_languages="$unsupported_languages fortran java"
# copied from rs6000-*-* entry
noconfigdirs="$noconfigdirs gprof target-libgloss target-libssp target-newlib ${libgcj}"
;;
- powerpc*-*-winnt* | powerpc*-*-pe* | ppc*-*-pe)
+ powerpc*-*-winnt* | powerpc*-*-pe*)
target_configdirs="$target_configdirs target-winsup"
noconfigdirs="$noconfigdirs gdb tcl tk make expect target-libgloss itcl gnuserv ${libgcj}"
# always build newlib.
;;
sh-*-* | sh64-*-*)
case "${host}" in
- i[[3456789]]86-*-vsta) ;; # don't add gprof back in
- i[[3456789]]86-*-go32*) ;; # don't add gprof back in
i[[3456789]]86-*-msdosdjgpp*) ;; # don't add gprof back in
*) skipdirs=`echo " ${skipdirs} " | sed -e 's/ gprof / /'` ;;
esac
esac
# Work in distributions that contain no compiler tools, like Autoconf.
-tentative_cc=""
host_makefile_frag=/dev/null
if test -d ${srcdir}/config ; then
case "${host}" in
- m68k-hp-hpux*)
- # Avoid "too much defining" errors from HPUX compiler.
- tentative_cc="cc -Wp,-H256000"
- # If "ar" in $PATH is GNU ar, the symbol table may need rebuilding.
- # If it's HP/UX ar, this should be harmless.
- RANLIB="ar ts"
- ;;
- m68k-apollo-sysv*)
- tentative_cc="cc -A ansi -A runtype,any -A systype,any -U__STDC__ -DUSG"
- ;;
- m68k-apollo-bsd*)
- #None of the Apollo compilers can compile gas or binutils. The preprocessor
- # chokes on bfd, the compiler won't let you assign integers to enums, and
- # other problems. Defining CC to gcc is a questionable way to say "don't use
- # the apollo compiler" (the preferred version of GCC could be called cc,
- # or whatever), but I'm not sure leaving CC as cc is any better...
- #CC=cc -A ansi -A runtype,any -A systype,any -U__STDC__ -DNO_STDARG
- # Used to have BISON=yacc.
- tentative_cc=gcc
- ;;
- m88k-dg-dgux*)
- tentative_cc="gcc -Wall -ansi -D__using_DGUX"
- ;;
- m88k-harris-cxux*)
- # Under CX/UX, we want to tell the compiler to use ANSI mode.
- tentative_cc="cc -Xa"
- host_makefile_frag="config/mh-cxux"
- ;;
- m88k-motorola-sysv*)
- ;;
- mips*-dec-ultrix*)
- tentative_cc="cc -Wf,-XNg1000"
- host_makefile_frag="config/mh-decstation"
- ;;
- mips*-nec-sysv4*)
- # The C compiler on NEC MIPS SVR4 needs bigger tables.
- tentative_cc="cc -ZXNd=5000 -ZXNg=1000"
- host_makefile_frag="config/mh-necv4"
- ;;
- mips*-sgi-irix4*)
- # Tell compiler to use K&R C. We can't compile under the SGI Ansi
- # environment. Also bump switch table size so that cp-parse will
- # compile. Bump string length limit so linker builds.
- tentative_cc="cc -cckr -Wf,-XNg1500 -Wf,-XNk1000 -Wf,-XNh2000 -Wf,-XNl8192"
- ;;
- mips*-*-sysv4*)
- host_makefile_frag="config/mh-sysv4"
- ;;
- mips*-*-sysv*)
- # This is for a MIPS running RISC/os 4.52C.
-
- # This is needed for GDB, but needs to be in the top-level make because
- # if a library is compiled with the bsd headers and gets linked with the
- # sysv system libraries all hell can break loose (e.g. a jmp_buf might be
- # a different size).
- # ptrace(2) apparently has problems in the BSD environment. No workaround is
- # known except to select the sysv environment. Could we use /proc instead?
- # These "sysv environments" and "bsd environments" often end up being a pain.
- #
- # This is not part of CFLAGS because perhaps not all C compilers have this
- # option.
- tentative_cc="cc -systype sysv"
- ;;
- i370-ibm-opened*)
- tentative_cc="c89"
- ;;
- i[[3456789]]86-*-sysv5*)
- host_makefile_frag="config/mh-sysv5"
- ;;
- i[[3456789]]86-*-dgux*)
- tentative_cc="gcc -Wall -ansi -D__using_DGUX"
- host_makefile_frag="config/mh-dgux386"
- ;;
- i[[3456789]]86-ncr-sysv4.3*)
- # The MetaWare compiler will generate a copyright message unless you
- # turn it off by adding the -Hnocopyr flag.
- tentative_cc="cc -Hnocopyr"
- ;;
- i[[3456789]]86-ncr-sysv4*)
- # for an NCR 3000 (i486/SVR4) system.
- # The NCR 3000 ships with a MetaWare compiler installed as /bin/cc.
- # This compiler not only emits obnoxious copyright messages every time
- # you run it, but it chokes and dies on a whole bunch of GNU source
- # files. Default to using the AT&T compiler installed in /usr/ccs/ATT/cc.
- tentative_cc="/usr/ccs/ATT/cc"
- host_makefile_frag="config/mh-ncr3000"
- ;;
- i[[3456789]]86-*-sco3.2v5*)
- ;;
- i[[3456789]]86-*-sco*)
- # The native C compiler botches some simple uses of const. Unfortunately,
- # it doesn't defined anything like "__sco__" for us to test for in ansidecl.h.
- tentative_cc="cc -Dconst="
- host_makefile_frag="config/mh-sco"
- ;;
- i[[3456789]]86-*-udk*)
- host_makefile_frag="config/mh-sysv5"
- ;;
- i[[3456789]]86-*-solaris2*)
- host_makefile_frag="config/mh-sysv4"
- ;;
i[[3456789]]86-*-msdosdjgpp*)
host_makefile_frag="config/mh-djgpp"
;;
*-interix*)
host_makefile_frag="config/mh-interix"
;;
- vax-*-ultrix2*)
- # The old BSD pcc isn't up to compiling parts of gdb so use gcc
- tentative_cc=gcc
- ;;
- *-*-solaris2*)
- host_makefile_frag="config/mh-solaris"
- ;;
- m68k-sun-sunos*)
- # Sun's C compiler needs the -J flag to be able to compile cp-parse.c
- # without overflowing the jump tables (-J says to use a 32 bit table)
- tentative_cc="cc -J"
- ;;
hppa*-hp-hpux10*)
- tentative_cc="cc -Wp,-H256000"
host_makefile_frag="config/mh-pa-hpux10"
;;
- hppa*-hp-hpux* | hppa*-*-hiux*)
- tentative_cc="cc -Wp,-H256000"
+ hppa*-hp-hpux*)
host_makefile_frag="config/mh-pa"
;;
hppa*-*)
host_makefile_frag="config/mh-pa"
;;
- *-hp-hpux* | *-*-hiux*)
- tentative_cc="cc -Wp,-H256000"
- ;;
- rs6000-*-lynxos*)
- # /bin/cc is less than useful for our purposes. Always use GCC
- tentative_cc="/usr/cygnus/progressive/bin/gcc"
- host_makefile_frag="config/mh-lynxrs6k"
- ;;
*-*-darwin*)
host_makefile_frag="config/mh-darwin"
;;
rs6000-*-aix*)
host_makefile_frag="config/mh-ppc-aix"
;;
- *-*-lynxos*)
- # /bin/cc is less than useful for our purposes. Always use GCC
- tentative_cc="/bin/gcc"
- ;;
- *-*-sysv4*)
- host_makefile_frag="config/mh-sysv4"
- ;;
- # This is placed last to prevent interfering with the cases above.
- i[[3456789]]86-*-*)
- # Build the stage2 and stage3 compilers with -fomit-frame-pointer.
- host_makefile_frag="config/mh-x86omitfp"
- ;;
esac
fi
-# If we aren't going to be using gcc, see if we can extract a definition
-# of CC from the fragment.
-# Actually, use the 'pre-extracted' version above.
-if test -z "${CC}" && test "${build}" = "${host}" ; then
- IFS="${IFS= }"; save_ifs="$IFS"; IFS="${IFS}:"
- found=
- for dir in $PATH; do
- test -z "$dir" && dir=.
- if test -f $dir/gcc; then
- found=yes
- break
- fi
- done
- IFS="$save_ifs"
- if test -z "${found}" && test -n "${tentative_cc}" ; then
- CC=$tentative_cc
- fi
-fi
-
if test "${build}" != "${host}" ; then
AR_FOR_BUILD=${AR_FOR_BUILD-ar}
AS_FOR_BUILD=${AS_FOR_BUILD-as}
build_lto_plugin=yes
],[if test x"$default_enable_lto" = x"yes" ; then
case $target in
- *-apple-darwin* | *-cygwin* | *-mingw*) ;;
+ *-apple-darwin9 | *-cygwin* | *-mingw*) ;;
# On other non-ELF platforms, LTO has yet to be validated.
*) enable_lto=no ;;
esac
extra_ranlibflags_for_target=
target_makefile_frag=/dev/null
case "${target}" in
- mep*-*-*)
- target_makefile_frag="config/mt-mep"
- ;;
spu-*-*)
target_makefile_frag="config/mt-spu"
;;
mips*-*-*linux* | mips*-*-gnu*)
target_makefile_frag="config/mt-mips-gnu"
;;
- *-*-netware*)
- target_makefile_frag="config/mt-netware"
- ;;
*-*-linux* | *-*-gnu* | *-*-k*bsd*-gnu | *-*-kopensolaris*-gnu)
target_makefile_frag="config/mt-gnu"
;;
# ranlib before Darwin10 requires the -c flag to look at common symbols.
extra_ranlibflags_for_target=" -c"
;;
- mips*-*-pe | sh*-*-pe | *arm-wince-pe)
- target_makefile_frag="config/mt-wince"
- ;;
esac
alphaieee_frag=/dev/null
# Decide which environment variable is used to find dynamic libraries.
case "${host}" in
*-*-hpux*) RPATH_ENVVAR=SHLIB_PATH ;;
- *-*-darwin* | *-*-rhapsody* ) RPATH_ENVVAR=DYLD_LIBRARY_PATH ;;
+ *-*-darwin*) RPATH_ENVVAR=DYLD_LIBRARY_PATH ;;
*-*-mingw* | *-*-cygwin ) RPATH_ENVVAR=PATH ;;
*) RPATH_ENVVAR=LD_LIBRARY_PATH ;;
esac