# Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000,
# 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012,
-# 2014, 2015, 2016 Free Software Foundation, Inc.
+# 2014, 2015, 2016, 2019 Free Software Foundation, Inc.
#
# This file is free software; you can redistribute it and/or modify it
# under the terms of the GNU General Public License as published by
m4_include(config/override.m4)
m4_include(config/proginstall.m4)
m4_include(config/elf.m4)
+m4_include(config/debuginfod.m4)
m4_include([libtool.m4])
m4_include([ltoptions.m4])
m4_include([ltsugar.m4])
m4_include([config/isl.m4])
AC_INIT(move-if-change)
-AC_PREREQ(2.64)
AC_DISABLE_OPTION_CHECKING
progname=$0
# these libraries are used by various programs built for the host environment
#f
-host_libs="intl libiberty opcodes bfd readline tcl tk itcl libgui zlib libbacktrace libcpp libdecnumber gmp mpfr mpc isl libelf libiconv"
+host_libs="intl libiberty opcodes bfd readline tcl tk itcl libgui zlib libbacktrace libcpp libdecnumber gmp mpfr mpc isl libelf libiconv libctf"
# these tools are built for the host environment
# Note, the powerpc-eabi build depends on sim occurring before gdb in order to
noconfigdirs="$noconfigdirs zlib"
fi
+# Don't compile the bundled readline/libreadline.a if --with-system-readline
+# is provided.
+if test x$with_system_readline = xyes ; then
+ noconfigdirs="$noconfigdirs readline"
+fi
+
# some tools are so dependent upon X11 that if we're not building with X,
# it's not even worth trying to configure, much less build, that tool.
LDFLAGS="$LDFLAGS -static-libstdc++ -static-libgcc"
AC_MSG_CHECKING([whether g++ accepts -static-libstdc++ -static-libgcc])
AC_LANG_PUSH(C++)
- AC_LINK_IFELSE([
+ AC_LINK_IFELSE([AC_LANG_SOURCE([
#if (__GNUC__ < 4) || (__GNUC__ == 4 && __GNUC_MINOR__ < 5)
#error -static-libstdc++ not implemented
#endif
-int main() {}],
+int main() {}])],
[AC_MSG_RESULT([yes]); have_static_libs=yes],
[AC_MSG_RESULT([no])])
AC_LANG_POP(C++)
gmpinc=
have_gmp=no
+# Check for debuginfod
+AC_DEBUGINFOD
+
# Specify a location for mpc
# check for this first so it ends up on the link line before mpfr.
AC_ARG_WITH(mpc,
[stage1_libs=])
AC_SUBST(stage1_libs)
+# Whether or not to use -static-libstdc++ and -static-libgcc. The
+# default is yes if gcc is being built; no otherwise. The reason for
+# this default is that gdb is sometimes linked against GNU Source
+# Highlight, which is a shared library that uses C++ exceptions. In
+# this case, -static-libstdc++ will cause crashes.
+AC_ARG_WITH(static-standard-libraries,
+[AS_HELP_STRING([--with-static-standard-libraries],
+ [use -static-libstdc++ and -static-libgcc (default=auto)])],
+[], [with_static_standard_libraries=auto])
+if test "$with_static_standard_libraries" = auto; then
+ with_static_standard_libraries=$have_compiler
+fi
+
# Linker flags to use for stage1 or when not bootstrapping.
AC_ARG_WITH(stage1-ldflags,
[AS_HELP_STRING([--with-stage1-ldflags=FLAGS], [linker flags for stage1])],
# In stage 1, default to linking libstdc++ and libgcc statically with GCC
# if supported. But if the user explicitly specified the libraries to use,
# trust that they are doing what they want.
- if test "$stage1_libs" = "" -a "$have_static_libs" = yes; then
+ if test "$with_static_standard_libraries" = yes -a "$stage1_libs" = "" \
+ -a "$have_static_libs" = yes; then
stage1_ldflags="-static-libstdc++ -static-libgcc"
fi])
AC_SUBST(stage1_ldflags)
CONFIGURE_GDB_TK=`echo ${GDB_TK} | sed s/-all-/-configure-/g`
INSTALL_GDB_TK=`echo ${GDB_TK} | sed s/-all-/-install-/g`
+# gdb depends on gnulib, but as nothing else does, only include it if
+# gdb is built.
+if echo " ${configdirs} " | grep " gdb " > /dev/null 2>&1 ; then
+ # The Makefile provides the ordering, so it's enough here to add
+ # gnulib to the list.
+ configdirs="${configdirs} gnulib"
+fi
+
# Strip out unwanted targets.
# While at that, we remove Makefiles if we were started for recursive
# extrasub-{build,host,target} not because there is any reason to split
# the substitutions up that way, but only to remain below the limit of
# 99 commands in a script, for HP-UX sed.
-# Do not nest @if/@endif pairs, because configure will not warn you at all.
+
+# Do not nest @if/@endif or @unless/@endunless pairs, because
+# configure will not warn you at all.
case "$enable_bootstrap:$ENABLE_GOLD: $configdirs :,$stage1_languages," in
yes:yes:*\ gold\ *:*,c++,*) ;;
extrasub_build="$extrasub_build
/^@if build-$module\$/d
/^@endif build-$module\$/d
+/^@unless build-$module\$/,/^@endunless build-$module\$/d
/^@if build-$module-$bootstrap_suffix\$/d
-/^@endif build-$module-$bootstrap_suffix\$/d"
+/^@endif build-$module-$bootstrap_suffix\$/d
+/^@unless build-$module-$bootstrap_suffix\$/,/^@endunless build-$module-$bootstrap_suffix\$/d"
done
extrasub_host=
for module in ${configdirs} ; do
extrasub_host="$extrasub_host
/^@if $module\$/d
/^@endif $module\$/d
+/^@unless $module\$/,/^@endunless $module\$/d
/^@if $module-$host_bootstrap_suffix\$/d
-/^@endif $module-$host_bootstrap_suffix\$/d"
+/^@endif $module-$host_bootstrap_suffix\$/d
+/^@unless $module-$host_bootstrap_suffix\$/,/^@endunless $module-$host_bootstrap_suffix\$/d"
done
extrasub_target=
for module in ${target_configdirs} ; do
extrasub_target="$extrasub_target
/^@if target-$module\$/d
/^@endif target-$module\$/d
+/^@unless target-$module\$/,/^@endunless target-$module\$/d
/^@if target-$module-$target_bootstrap_suffix\$/d
-/^@endif target-$module-$target_bootstrap_suffix\$/d"
+/^@endif target-$module-$target_bootstrap_suffix\$/d
+/^@unless target-$module-$target_bootstrap_suffix\$/,/^@endunless target-$module-$target_bootstrap_suffix\$/d"
done
# Do the final fixup along with target modules.
extrasub_target="$extrasub_target
-/^@if /,/^@endif /d"
+/^@if /,/^@endif /d
+/^@unless /d
+/^@endunless /d"
# Create the serialization dependencies. This uses a temporary file.