### WARNING: this file contains embedded tabs. Do not run untabify on this file.
sinclude(config/acx.m4)
+m4_include(config/proginstall.m4)
AC_INIT(move-if-change)
AC_PREREQ(2.59)
AC_ARG_PROGRAM
m4_pattern_allow([^AS_FOR_TARGET$])dnl
+m4_pattern_allow([^AS_FOR_BUILD$])dnl
# Get 'install' or 'install-sh' and its variants.
AC_PROG_INSTALL
# know that we are building the simulator.
# binutils, gas and ld appear in that order because it makes sense to run
# "make check" in that particular order.
+# If --enable-gold is used, "gold" will replace "ld".
host_tools="texinfo byacc flex bison binutils gas ld fixincludes gcc sid sim gdb make patch prms send-pr gprof etc expect dejagnu ash bash bzip2 m4 autoconf automake libtool diff rcs fileutils shellutils time textutils wdiff find uudecode hello tar gzip indent recode release sed utils guile perl gawk findutils gettext zip fastjar gnattools"
# libgcj represents the runtime libraries only used by gcj.
target-libiberty \
target-libgloss \
target-newlib \
+ target-libgomp \
target-libstdc++-v3 \
target-libmudflap \
target-libssp \
target-boehm-gc \
${libgcj} \
target-libobjc \
- target-libada \
- target-libgomp"
+ target-libada"
# these tools are built using the target libraries, and are intended to
# run only in the target environment
target_configdirs=`echo ${target_libraries} ${target_tools}`
build_configdirs=`echo ${build_libs} ${build_tools}`
+m4_divert_text([PARSE_ARGS],
+[ac_subdirs_all=`cd $srcdir && echo */configure | sed 's,/configure,,g'`
+])
+
################################################################################
srcname="gnu development package"
# Make sure we don't let GNU ld be added if we didn't want it.
if test x$with_gnu_ld = xno ; then
use_gnu_ld=no
- noconfigdirs="$noconfigdirs ld"
+ noconfigdirs="$noconfigdirs ld gold"
fi
use_gnu_as=
yes) skipdirs=`echo " ${skipdirs} " | sed -e 's/ target-newlib / /'` ;;
esac
+# Handle --enable-gold.
+
+AC_ARG_ENABLE(gold,
+[ --enable-gold use gold instead of ld],
+ENABLE_GOLD=$enableval,
+ENABLE_GOLD=no)
+if test "${ENABLE_GOLD}" = "yes"; then
+ # Check for ELF target.
+ is_elf=no
+ case "${target}" in
+ *-*-elf* | *-*-sysv4* | *-*-unixware* | *-*-eabi* | hppa*64*-*-hpux* \
+ | *-*-linux* | frv-*-uclinux* | *-*-irix5* | *-*-irix6* \
+ | *-*-netbsd* | *-*-openbsd* | *-*-freebsd* | *-*-solaris2*)
+ case "${target}" in
+ *-*-linux*aout* | *-*-linux*oldld*)
+ ;;
+ *)
+ is_elf=yes
+ ;;
+ esac
+ esac
+
+ if test "$is_elf" = "yes"; then
+ # Check for target supported by gold.
+ case "${target}" in
+ i?86-*-* | x86_64-*-*)
+ configdirs="`echo " ${configdirs} " | sed -e 's/ ld / gold /'`"
+ ;;
+ esac
+ fi
+fi
+
# Configure extra directories which are host specific
case "${host}" in
*-*-chorusos)
noconfigdirs="$noconfigdirs target-newlib target-libgloss ${libgcj}"
;;
- powerpc-*-darwin* | i[[3456789]]86-*-darwin*)
+ powerpc-*-darwin* | i[[3456789]]86-*-darwin* | x86_64-*-darwin9*)
noconfigdirs="$noconfigdirs bfd binutils ld gas opcodes gdb gprof"
noconfigdirs="$noconfigdirs sim target-rda"
;;
unsupported_languages="$unsupported_languages fortran"
noconfigdirs="$noconfigdirs target-libffi target-boehm-gc";;
*-*-elf)
- unsupported_languages="$unsupported_languages fortran"
noconfigdirs="$noconfigdirs target-boehm-gc";;
*-*-linux*)
noconfigdirs="$noconfigdirs target-newlib target-libgloss";;
vax-*-*)
noconfigdirs="$noconfigdirs target-newlib target-libgloss ${libgcj}"
;;
- xtensa-*-*)
+ xtensa*-*-*)
noconfigdirs="$noconfigdirs ${libgcj}"
;;
ip2k-*-*)
fi
if test "${build}" != "${host}" ; then
+ AR_FOR_BUILD=${AR_FOR_BUILD-ar}
+ AS_FOR_BUILD=${AS_FOR_BUILD-as}
CC_FOR_BUILD=${CC_FOR_BUILD-gcc}
+ CXX_FOR_BUILD=${CXX_FOR_BUILD-g++}
+ GCJ_FOR_BUILD=${GCJ_FOR_BUILD-gcj}
+ GFORTRAN_FOR_BUILD=${GFORTRAN_FOR_BUILD-gfortran}
+ DLLTOOL_FOR_BUILD=${DLLTOOL_FOR_BUILD-dlltool}
+ LD_FOR_BUILD=${LD_FOR_BUILD-ld}
+ NM_FOR_BUILD=${NM_FOR_BUILD-nm}
+ RANLIB_FOR_BUILD=${RANLIB_FOR_BUILD-ranlib}
+ WINDRES_FOR_BUILD=${WINDRES_FOR_BUILD-windres}
+ WINDMC_FOR_BUILD=${WINDMC_FOR_BUILD-windmc}
else
+ AR_FOR_BUILD="\$(AR)"
+ AS_FOR_BUILD="\$(AS)"
CC_FOR_BUILD="\$(CC)"
+ CXX_FOR_BUILD="\$(CXX)"
+ GCJ_FOR_BUILD="\$(GCJ)"
+ GFORTRAN_FOR_BUILD="\$(GFORTRAN)"
+ DLLTOOL_FOR_BUILD="\$(DLLTOOL)"
+ LD_FOR_BUILD="\$(LD)"
+ NM_FOR_BUILD="\$(NM)"
+ RANLIB_FOR_BUILD="\$(RANLIB)"
+ WINDRES_FOR_BUILD="\$(WINDRES)"
+ WINDMC_FOR_BUILD="\$(WINDMC)"
fi
AC_PROG_CC
if test x"$have_gmp" = xyes; then
saved_LIBS="$LIBS"
LIBS="$LIBS $gmplibs"
- dnl MPFR 2.2.0 is acceptable but buggy, MPFR 2.2.1 is better.
+ dnl MPFR 2.2.1 is acceptable, but MPFR 2.3.0 is better.
AC_MSG_CHECKING([for correct version of mpfr.h])
AC_TRY_LINK([#include <gmp.h>
#include <mpfr.h>],[
- #if MPFR_VERSION < MPFR_VERSION_NUM(2,2,0)
+ #if MPFR_VERSION < MPFR_VERSION_NUM(2,2,1)
choke me
#endif
mpfr_t n;
mpfr_subnormalize (x, t, GMP_RNDN);
], [AC_TRY_LINK([#include <gmp.h>
#include <mpfr.h>],[
- #if MPFR_VERSION < MPFR_VERSION_NUM(2,2,1)
+ #if MPFR_VERSION < MPFR_VERSION_NUM(2,3,0)
choke me
#endif
mpfr_t n; mpfr_init(n);
CFLAGS="$saved_CFLAGS"
if test x$have_gmp != xyes; then
- AC_MSG_ERROR([Building GCC requires GMP 4.1+ and MPFR 2.2.1+.
+ AC_MSG_ERROR([Building GCC requires GMP 4.1+ and MPFR 2.3.0+.
Try the --with-gmp and/or --with-mpfr options to specify their locations.
Copies of these libraries' source code can be found at their respective
hosting sites as well as at ftp://gcc.gnu.org/pub/gcc/infrastructure/.
# Handle --disable-<component> generically.
for dir in $configdirs $build_configdirs $target_configdirs ; do
dirname=`echo $dir | sed -e s/target-//g -e s/build-//g -e s/-/_/g`
- if eval test x\${enable_${dirname}} "=" xno ; then
+ varname=`echo $dirname | sed -e s/+/_/g`
+ if eval test x\${enable_${varname}} "=" xno ; then
noconfigdirs="$noconfigdirs $dir"
fi
done
[DEBUG_PREFIX_CFLAGS_FOR_TARGET=])
AC_SUBST(DEBUG_PREFIX_CFLAGS_FOR_TARGET)
+# During gcc bootstrap, if we use some random cc for stage1 then CFLAGS
+# might be empty or "-g". We don't require a C++ compiler, so CXXFLAGS
+# might also be empty (or "-g", if a non-GCC C++ compiler is in the path).
+# We want to ensure that TARGET libraries (which we know are built with
+# gcc) are built with "-O2 -g", so include those options when setting
+# CFLAGS_FOR_TARGET and CXXFLAGS_FOR_TARGET.
+if test "x$CFLAGS_FOR_TARGET" = x; then
+ CFLAGS_FOR_TARGET=$CFLAGS
+ case " $CFLAGS " in
+ *" -O2 "*) ;;
+ *) CFLAGS_FOR_TARGET="-O2 $CFLAGS" ;;
+ esac
+ case " $CFLAGS " in
+ *" -g "* | *" -g3 "*) ;;
+ *) CFLAGS_FOR_TARGET="-g $CFLAGS" ;;
+ esac
+fi
+AC_SUBST(CFLAGS_FOR_TARGET)
+
+if test "x$CXXFLAGS_FOR_TARGET" = x; then
+ CXXFLAGS_FOR_TARGET=$CXXFLAGS
+ case " $CXXFLAGS " in
+ *" -O2 "*) ;;
+ *) CXXFLAGS_FOR_TARGET="-O2 $CXXFLAGS" ;;
+ esac
+ case " $CXXFLAGS " in
+ *" -g "* | *" -g3 "*) ;;
+ *) CXXFLAGS_FOR_TARGET="-g $CXXFLAGS" ;;
+ esac
+fi
+AC_SUBST(CXXFLAGS_FOR_TARGET)
+
# Handle --with-headers=XXX. If the value is not "yes", the contents of
# the named directory are copied to $(tooldir)/sys-include.
if test x"${with_headers}" != x && test x"${with_headers}" != xno ; then
fi
if test x${use_gnu_ld} = x &&
- echo " ${configdirs} " | grep " ld " > /dev/null 2>&1 ; then
+ echo " ${configdirs} " | egrep " (go)?ld " > /dev/null 2>&1 ; then
with_gnu_ld=yes
extra_host_args="$extra_host_args --with-gnu-ld"
fi
v850*-*-*)
md_exec_prefix=/usr/ccs/bin
;;
- xtensa-*-elf*)
+ xtensa*-*-elf*)
;;
*-*-beos* | \
mips*-sde-elf*)
target_makefile_frag="config/mt-sde"
;;
+ mipsisa*-*-elfoabi*)
+ target_makefile_frag="config/mt-mips-elfoabi"
+ ;;
*-*-netware*)
target_makefile_frag="config/mt-netware"
;;
# Allow the user to override the flags for
# our build compiler if desired.
-CFLAGS_FOR_BUILD=${CFLAGS_FOR_BUILD-${CFLAGS}}
+if test x"${build}" = x"${host}" ; then
+ CFLAGS_FOR_BUILD=${CFLAGS_FOR_BUILD-${CFLAGS}}
+ CXXFLAGS_FOR_BUILD=${CXXFLAGS_FOR_BUILD-${CXXFLAGS}}
+ LDFLAGS_FOR_BUILD=${LDFLAGS_FOR_BUILD-${LDFLAGS}}
+fi
# On Canadian crosses, we'll be searching the right directories for
# the previously-installed cross compiler, so don't bother to add
# Build tools.
+AC_SUBST(AR_FOR_BUILD)
+AC_SUBST(AS_FOR_BUILD)
AC_SUBST(CC_FOR_BUILD)
+AC_SUBST(CFLAGS_FOR_BUILD)
+AC_SUBST(CXXFLAGS_FOR_BUILD)
+AC_SUBST(CXX_FOR_BUILD)
+AC_SUBST(DLLTOOL_FOR_BUILD)
+AC_SUBST(GCJ_FOR_BUILD)
+AC_SUBST(GFORTRAN_FOR_BUILD)
+AC_SUBST(LDFLAGS_FOR_BUILD)
+AC_SUBST(LD_FOR_BUILD)
+AC_SUBST(NM_FOR_BUILD)
+AC_SUBST(RANLIB_FOR_BUILD)
+AC_SUBST(WINDMC_FOR_BUILD)
+AC_SUBST(WINDRES_FOR_BUILD)
AC_SUBST(config_shell)
# Generate default definitions for YACC, M4, LEX and other programs that run
*" texinfo "*) MAKEINFO='$$r/$(BUILD_SUBDIR)/texinfo/makeinfo/makeinfo' ;;
*)
changequote(,)
- # For an installed makeinfo, we require it to be from texinfo 4.4 or
+ # For an installed makeinfo, we require it to be from texinfo 4.6 or
# higher, else we use the "missing" dummy.
if ${MAKEINFO} --version \
- | egrep 'texinfo[^0-9]*([1-3][0-9]|4\.[4-9]|[5-9])' >/dev/null 2>&1; then
+ | egrep 'texinfo[^0-9]*(4\.([6-9]|[1-9][0-9])|[5-9]|[1-9][0-9])' >/dev/null 2>&1; then
:
else
MAKEINFO="$MISSING makeinfo"
AC_SUBST(CC)
AC_SUBST(CXX)
AC_SUBST(CFLAGS)
-AC_SUBST(CFLAGS_FOR_BUILD)
AC_SUBST(CXXFLAGS)
# Target tools.