# these libraries are used by various programs built for the host environment
#
-host_libs="mmalloc libiberty opcodes bfd readline gash db tcl tk tclX itcl"
+host_libs="mmalloc libiberty opcodes bfd readline gash db tcl tk tclX itcl tix libgui"
# start-sanitize-ide
host_libs="${host_libs} libide"
# end-sanitize-ide
# these tools are built for the host environment
# Note, the powerpc-eabi build depends on sim occurring before gdb in order to
# know that we are building the simulator.
-host_tools="texinfo byacc flex bison binutils ld gas gcc sim gdb make patch prms send-pr gprof gdbtest tgas etc expect dejagnu bash m4 autoconf automake ispell grep diff rcs cvs fileutils shellutils time textutils wdiff find emacs emacs19 uudecode hello tar gzip indent recode release sed utils guile perl apache inet gawk findutils sn"
+host_tools="texinfo byacc flex bison binutils ld gas gcc sim gdb make patch prms send-pr gprof gdbtest tgas etc expect dejagnu bash m4 autoconf automake ispell grep diff rcs cvssrc fileutils shellutils time textutils wdiff find emacs emacs19 uudecode hello tar gzip indent recode release sed utils guile perl apache inet gawk findutils snavigator libtool"
# start-sanitize-ide
-host_tools="${host_tools} ilu vmake"
+host_tools="${host_tools} ilu vmake jstools"
# end-sanitize-ide
# these libraries are built for the target environment, and are built after
# list belongs in this list. those programs are also very likely
# candidates for the "native_only" list which follows
#
-target_tools="target-examples target-groff"
+target_tools="target-examples target-groff target-gperf"
################################################################################
#
# This must be a single line because of the way it is searched by grep in
# the code below.
-native_only="autoconf automake cvs emacs emacs19 fileutils find gawk grep gzip hello indent ispell m4 rcs recode sed shellutils tar textutils gash uudecode wdiff gprof target-groff guile perl apache inet time bash prms sn gnuserv"
+native_only="autoconf automake cvssrc emacs emacs19 fileutils find gawk grep gzip hello indent ispell m4 rcs recode sed shellutils tar textutils gash uudecode wdiff gprof target-groff guile perl apache inet time bash prms snavigator gnuserv target-gperf libtool"
# directories to be built in a cross environment only
#
-cross_only="target-libgloss target-newlib"
+cross_only="target-libgloss target-newlib target-cygmon target-opcodes"
## All tools belong in one of the four categories, and are assigned above
## We assign ${configdirs} this way to remove all embedded newlines. This
# Work in distributions that contain no compiler tools, like Autoconf.
if [ -d ${srcdir}/config ]; then
case "${host}" in
- m68k-hp-hpux*) host_makefile_frag=config/mh-hp300 ;;
- m68k-apollo-sysv*) host_makefile_frag=config/mh-apollo68 ;;
- m68k-apollo-bsd*) host_makefile_frag=config/mh-a68bsd ;;
- m88k-dg-dgux*) host_makefile_frag=config/mh-dgux ;;
- m88k-harris-cxux*) host_makefile_frag=config/mh-cxux ;;
- m88k-motorola-sysv*) host_makefile_frag=config/mh-delta88;;
- mips*-dec-ultrix*) host_makefile_frag=config/mh-decstation ;;
- mips*-nec-sysv4*) host_makefile_frag=config/mh-necv4 ;;
- mips*-sgi-irix6*) host_makefile_frag=config/mh-irix6 ;;
- mips*-sgi-irix5*) host_makefile_frag=config/mh-irix5 ;;
- mips*-sgi-irix4*) host_makefile_frag=config/mh-irix4 ;;
- mips*-sgi-irix3*) host_makefile_frag=config/mh-sysv ;;
- mips*-*-sysv4*) host_makefile_frag=config/mh-sysv4 ;;
- mips*-*-sysv*) host_makefile_frag=config/mh-riscos ;;
- i[3456]86-*-dgux*) host_makefile_frag=config/mh-dgux386 ;;
- i[3456]86-ncr-sysv4.3) host_makefile_frag=config/mh-ncrsvr43 ;;
- i[3456]86-ncr-sysv4*) host_makefile_frag=config/mh-ncr3000 ;;
- i[3456]86-*-sco3.2v5*) host_makefile_frag=config/mh-sysv ;;
- i[3456]86-*-sco*) host_makefile_frag=config/mh-sco ;;
- i[3456]86-*-isc*) host_makefile_frag=config/mh-sysv ;;
- i[3456]86-*-solaris2*) host_makefile_frag=config/mh-sysv4 ;;
- i[3456]86-*-aix*) host_makefile_frag=config/mh-aix386 ;;
- i[3456]86-*-go32*) host_makefile_frag=config/mh-go32 ;;
- *-cygwin32*) host_makefile_frag=config/mh-cygwin32 ;;
- *-windows*) host_makefile_frag=config/mh-windows ;;
- vax-*-ultrix2*) host_makefile_frag=config/mh-vaxult2 ;;
- *-*-solaris2*) host_makefile_frag=config/mh-solaris ;;
- m68k-sun-sunos*) host_makefile_frag=config/mh-sun3 ;;
- *-hp-hpux[78]*) host_makefile_frag=config/mh-hpux8 ;;
- *-hp-hpux*) host_makefile_frag=config/mh-hpux ;;
- *-*-hiux*) host_makefile_frag=config/mh-hpux ;;
- rs6000-*-lynxos*) host_makefile_frag=config/mh-lynxrs6k ;;
- *-*-lynxos*) host_makefile_frag=config/mh-lynxos ;;
- *-*-sysv4*) host_makefile_frag=config/mh-sysv4 ;;
- *-*-sysv*) host_makefile_frag=config/mh-sysv ;;
+ m68k-hp-hpux*)
+ host_makefile_frag="${host_makefile_frag} config/mh-hp300"
+ ;;
+ m68k-apollo-sysv*)
+ host_makefile_frag="${host_makefile_frag} config/mh-apollo68"
+ ;;
+ m68k-apollo-bsd*)
+ host_makefile_frag="${host_makefile_frag} config/mh-a68bsd"
+ ;;
+ m88k-dg-dgux*)
+ host_makefile_frag="${host_makefile_frag} config/mh-dgux"
+ ;;
+ m88k-harris-cxux*)
+ host_makefile_frag="${host_makefile_frag} config/mh-cxux"
+ ;;
+ m88k-motorola-sysv*)
+ host_makefile_frag="${host_makefile_frag} config/mh-delta88"
+ ;;
+ mips*-dec-ultrix*)
+ host_makefile_frag="${host_makefile_frag} config/mh-decstation"
+ ;;
+ mips*-nec-sysv4*)
+ host_makefile_frag="${host_makefile_frag} config/mh-necv4"
+ ;;
+ mips*-sgi-irix6*)
+ host_makefile_frag="${host_makefile_frag} config/mh-irix6"
+ ;;
+ mips*-sgi-irix5*)
+ host_makefile_frag="${host_makefile_frag} config/mh-irix5"
+ ;;
+ mips*-sgi-irix4*)
+ host_makefile_frag="${host_makefile_frag} config/mh-irix4"
+ ;;
+ mips*-sgi-irix3*)
+ host_makefile_frag="${host_makefile_frag} config/mh-sysv"
+ ;;
+ mips*-*-sysv4*)
+ host_makefile_frag="${host_makefile_frag} config/mh-sysv4"
+ ;;
+ mips*-*-sysv*)
+ host_makefile_frag="${host_makefile_frag} config/mh-riscos"
+ ;;
+ i[3456]86-*-dgux*)
+ host_makefile_frag="${host_makefile_frag} config/mh-dgux386"
+ ;;
+ i[3456]86-ncr-sysv4.3*)
+ host_makefile_frag="${host_makefile_frag} config/mh-ncrsvr43"
+ ;;
+ i[3456]86-ncr-sysv4*)
+ host_makefile_frag="${host_makefile_frag} config/mh-ncr3000"
+ ;;
+ i[3456]86-*-sco3.2v5*)
+ host_makefile_frag="${host_makefile_frag} config/mh-sysv"
+ ;;
+ i[3456]86-*-sco*)
+ host_makefile_frag="${host_makefile_frag} config/mh-sco"
+ ;;
+ i[3456]86-*-isc*)
+ host_makefile_frag="${host_makefile_frag} config/mh-sysv"
+ ;;
+ i[3456]86-*-solaris2*)
+ host_makefile_frag="${host_makefile_frag} config/mh-sysv4"
+ ;;
+ i[3456]86-*-aix*)
+ host_makefile_frag="${host_makefile_frag} config/mh-aix386"
+ ;;
+ i[3456]86-*-go32*)
+ host_makefile_frag="${host_makefile_frag} config/mh-go32"
+ ;;
+ i[3456]86-*-msdosdjgpp*)
+ host_makefile_frag="${host_makefile_frag} config/mh-go32"
+ ;;
+ *-cygwin32*)
+ host_makefile_frag="${host_makefile_frag} config/mh-cygwin32"
+ ;;
+ *-mingw32*)
+ host_makefile_frag="${host_makefile_frag} config/mh-mingw32"
+ ;;
+# start-sanitize-mswin
+ *-windows*)
+ host_makefile_frag="${host_makefile_frag} config/mh-windows"
+ ;;
+# end-sanitize-mswin
+ vax-*-ultrix2*)
+ host_makefile_frag="${host_makefile_frag} config/mh-vaxult2"
+ ;;
+ *-*-solaris2*)
+ host_makefile_frag="${host_makefile_frag} config/mh-solaris"
+ ;;
+ m68k-sun-sunos*)
+ host_makefile_frag="${host_makefile_frag} config/mh-sun3"
+ ;;
+ *-hp-hpux[78]*)
+ host_makefile_frag="${host_makefile_frag} config/mh-hpux8"
+ ;;
+ *-hp-hpux*)
+ host_makefile_frag="${host_makefile_frag} config/mh-hpux"
+ ;;
+ *-*-hiux*)
+ host_makefile_frag="${host_makefile_frag} config/mh-hpux"
+ ;;
+ rs6000-*-lynxos*)
+ host_makefile_frag="${host_makefile_frag} config/mh-lynxrs6k"
+ ;;
+ *-*-lynxos*)
+ host_makefile_frag="${host_makefile_frag} config/mh-lynxos"
+ ;;
+ *-*-sysv4*)
+ host_makefile_frag="${host_makefile_frag} config/mh-sysv4"
+ ;;
+ *-*-sysv*)
+ host_makefile_frag="${host_makefile_frag} config/mh-sysv"
+ ;;
esac
fi
esac
if [ x${shared} = xyes ]; then
- waugh=
case "${host}" in
- hppa*) waugh=config/mh-papic ;;
- i[3456]86-*) waugh=config/mh-x86pic ;;
- sparc64-*) waugh=config/mh-sparcpic ;;
- powerpc*-*) waugh=config/mh-ppcpic ;;
- *) waugh=config/mh-${host_cpu}pic ;;
+ hppa*)
+ host_makefile_frag="${host_makefile_frag} config/mh-papic"
+ ;;
+ i[3456]86-*)
+ host_makefile_frag="${host_makefile_frag} config/mh-x86pic"
+ ;;
+ sparc64-*)
+ host_makefile_frag="${host_makefile_frag} config/mh-sparcpic"
+ ;;
+ powerpc*-*)
+ host_makefile_frag="${host_makefile_frag} config/mh-ppcpic"
+ ;;
+ alpha-*-linux*)
+ host_makefile_frag="${host_makefile_frag} config/mh-elfalphapic"
+ ;;
+ *)
+ if test -f ${srcdir}/config/mh-${host_cpu}pic; then
+ host_makefile_frag="${host_makefile_frag} config/mh-${host_cpu}pic"
+ fi
+ ;;
esac
- if [ -f ${srcdir}/${waugh} ]; then
- if [ -n "${host_makefile_frag}" ] ; then
- cat ${srcdir}/${host_makefile_frag} > mh-frag
- cat ${srcdir}/${waugh} >> mh-frag
- host_makefile_frag=mh-frag
- else
- host_makefile_frag=${waugh}
- fi
- fi
+fi
+
+rm -f mh-frag
+if [ -n "${host_makefile_frag}" ] ; then
+ for f in ${host_makefile_frag}
+ do
+ cat ${srcdir}/$f >> mh-frag
+ done
+ host_makefile_frag=mh-frag
fi
# per-target:
case "${target}" in
- v810*) target_makefile_frag=config/mt-v810 ;;
- i[3456]86-*-netware*) target_makefile_frag=config/mt-netware ;;
+ v810*)
+ target_makefile_frag="${target_makefile_frag} config/mt-v810"
+ ;;
+ i[3456]86-*-netware*)
+ target_makefile_frag="${target_makefile_frag} config/mt-netware"
+ ;;
+ powerpc-*-netware*)
+ target_makefile_frag="${target_makefile_frag} config/mt-netware"
+ ;;
# start-sanitize-r5900
- mips64vr5900*-*-*) target_makefile_frag=config/mt-r5900 ;;
+ mips64r59*)
+ target_makefile_frag="${target_makefile_frag} config/mt-r5900"
+ ;;
# end-sanitize-r5900
- powerpc-*-netware*) target_makefile_frag=config/mt-netware ;;
+ *-*-linux-gnu)
+ target_makefile_frag="${target_makefile_frag} config/mt-linux"
+ ;;
esac
skipdirs=
yes | "") # the default value for this tree is that X11 is available
;;
no)
- skipdirs="${skipdirs} tk gash"
+ skipdirs="${skipdirs} tk libgui gash"
# start-sanitize-ide
- skipdirs="${skipdirs} libide vmake"
+ skipdirs="${skipdirs} libide vmake jstools"
# end-sanitize-ide
;;
*)
skipdirs="${skipdirs} ${cross_only}"
is_cross_compiler=no
target_subdir=.
+ case "${host}" in
+ # We need multilib support for irix6, to get libiberty built
+ # properly for o32 and n32.
+ mips-sgi-irix6*) target_subdir=${host} ;;
+ esac
else
# similarly, don't build the targets in the 'native only'
# list when building a cross compiler
skipdirs="${skipdirs} ${native_only}"
is_cross_compiler=yes
target_subdir=${target_alias}
- if [ ! -d ${target_subdir} ] ; then
- if mkdir ${target_subdir} ; then true
- else
- echo "'*** could not make ${PWD=`pwd`}/${target_subdir}" 1>&2
- exit 1
- fi
- fi
fi
+if [ ! -d ${target_subdir} ] ; then
+ if mkdir ${target_subdir} ; then true
+ else
+ echo "'*** could not make ${PWD=`pwd`}/${target_subdir}" 1>&2
+ exit 1
+ fi
+fi
+
copy_dirs=
# Handle --with-headers=XXX. The contents of the named directory are
case "${host}" in
i[3456]86-*-go32*)
configdirs="$configdirs dosrel" ;;
+ i[3456]86-*-mingw32*)
+ configdirs="$configdirs dosrel" ;;
*-cygwin32*)
configdirs="$configdirs dosrel" ;;
esac
case "${host}" in
i[3456]86-*-vsta)
- noconfigdirs="tcl expect dejagnu make texinfo bison patch flex byacc send-pr gprof uudecode dejagnu diff guile perl apache inet itcl db sn gnuserv"
+ noconfigdirs="tcl expect dejagnu make texinfo bison patch flex byacc send-pr gprof uudecode dejagnu diff guile perl apache inet itcl tix db snavigator gnuserv"
# start-sanitize-ide
- noconfigdirs="$noconfigdirs libide vmake"
+ noconfigdirs="$noconfigdirs libide vmake jstools"
# end-sanitize-ide
;;
- i[3456]86-*-go32)
- noconfigdirs="tcl tk expect dejagnu make texinfo bison patch flex byacc send-pr gprof uudecode dejagnu diff guile perl apache inet itcl db sn gnuserv"
+ i[3456]86-*-go32* | i[3456]86-*-msdosdjgpp*)
+ noconfigdirs="tcl tk expect dejagnu make texinfo bison patch flex byacc send-pr uudecode dejagnu diff guile perl apache inet itcl tix db snavigator gnuserv"
# start-sanitize-ide
- noconfigdirs="$noconfigdirs libide vmake"
+ noconfigdirs="$noconfigdirs libide vmake jstools"
# end-sanitize-ide
;;
+ i[3456]86-*-mingw32*)
+ # noconfigdirs="tcl tk expect dejagnu make texinfo bison patch flex byacc send-pr uudecode dejagnu diff guile perl apache inet itcl tix db snavigator gnuserv"
+ noconfigdirs="expect dejagnu cvs autoconf automake send-pr gprof rcs guile perl texinfo apache inet libtool"
+ ;;
*-*-cygwin32)
- noconfigdirs="expect dejagnu cvs autoconf automake bison send-pr gprof rcs guile perl texinfo apache inet"
+ noconfigdirs="autoconf automake send-pr gprof rcs guile perl texinfo apache inet"
;;
*-*-windows*)
# This is only used to build WinGDB...
- configdirs="bfd gdb libiberty opcodes readline sim"
+# note that powerpc-eabi depends on sim configured before gdb.
+ configdirs="bfd libiberty opcodes readline sim gdb"
target_configdirs=
;;
+ *-*-netbsd*)
+ noconfigdirs="rcs"
+ ;;
ppc*-*-pe)
- noconfigdirs="patch diff make tk tcl expect dejagnu cvs autoconf automake texinfo bison send-pr gprof rcs guile perl apache inet itcl db sn gnuserv"
+ noconfigdirs="patch diff make tk tcl expect dejagnu cvssrc autoconf automake texinfo bison send-pr gprof rcs guile perl apache inet itcl tix db snavigator gnuserv"
# start-sanitize-ide
- noconfigdirs="$noconfigdirs libide vmake"
+ noconfigdirs="$noconfigdirs libide vmake jstools"
# end-sanitize-ide
;;
esac
*-*-netware)
noconfigdirs="$noconfigdirs target-libg++ target-libstdc++ target-librx target-newlib target-libiberty target-libgloss"
;;
+ *-*-rtems*)
+ noconfigdirs="$noconfigdirs target-libgloss"
+ ;;
*-*-vxworks*)
noconfigdirs="$noconfigdirs target-newlib target-libgloss"
;;
alpha-dec-osf*)
# ld works, but does not support shared libraries. emacs doesn't
- # work. newlib is not 64 bit ready. I'm not sure about fileutils or grep.
+ # work. newlib is not 64 bit ready. I'm not sure about fileutils.
# gas doesn't generate exception information.
- noconfigdirs="$noconfigdirs gas ld emacs fileutils grep target-newlib target-libgloss"
+ noconfigdirs="$noconfigdirs gas ld emacs fileutils target-newlib target-libgloss"
;;
alpha*-*-*vms*)
noconfigdirs="$noconfigdirs gdb ld target-newlib target-libgloss"
;;
+ alpha-*-linux*)
+ # newlib is not 64 bit ready
+ noconfigdirs="$noconfigdirs target-newlib target-libgloss"
+ # linux has rx in libc
+ skipdirs="$skipdirs target-librx"
+ ;;
alpha*-*-*)
# newlib is not 64 bit ready
noconfigdirs="$noconfigdirs target-newlib target-libgloss"
;;
-# start-sanitize-arc
arc-*-*)
noconfigdirs="$noconfigdirs target-libgloss"
;;
-# end-sanitize-arc
arm-*-pe*)
noconfigdirs="$noconfigdirs target-libgloss"
;;
arm-*-coff*)
noconfigdirs="$noconfigdirs target-libgloss"
;;
+ thumb-*-coff) # CYGNUS LOCAL nickc/thumb
+ noconfigdirs="$noconfigdirs target-libgloss"
+ ;;
arm-*-riscix*)
noconfigdirs="$noconfigdirs ld target-libgloss"
;;
;;
# start-sanitize-d30v
d30v-*-*)
- noconfigdirs="$noconfigdirs tcl tk expect gcc gdb newlib target-librx target-libg++ target-libstdc++ target-libio target-libgloss itcl db sn gnuserv target-libiberty target-newlib target-examples"
-# start-sanitize-ide
- noconfigdirs="$noconfigdirs libide vmake"
-# end-sanitize-ide
;;
# end-sanitize-d30v
h8300*-*-* | \
noconfigdirs="$noconfigdirs target-libg++ target-libstdc++ target-libio target-librx target-libgloss"
;;
hppa*-*-*elf* | \
- hppa*-*-lites* | \
- hppa*-*-rtems* )
+ hppa*-*-lites*)
# Do configure ld/binutils/gas for this case.
;;
hppa*-*-*)
esac
noconfigdirs="$noconfigdirs ld shellutils"
;;
- i[3456]86-*-go32)
+ i[3456]86-*-go32* | i[3456]-*-msdosdjgpp*)
# but don't build gdb
noconfigdirs="$noconfigdirs gdb target-libg++ target-libstdc++ target-libio target-librx"
;;
- *-*-cygwin32)
- target_configdirs="$target_configdirs target-winsup"
+ i[3456]86-*-mingw32*)
+ target_configdirs="$target_configdirs target-mingw"
noconfigdirs="$noconfigdirs expect target-libgloss"
+
+ # Can't build gdb for mingw32 if not native.
+ case "${host}" in
+ i[3456]86-*-mingw32) ;; # keep gdb tcl tk expect etc.
+ *) noconfigdirs="$noconfigdirs gdb tcl tk expect itcl tix db snavigator gnuserv"
+ ;;
+ esac
+ ;;
+ *-*-cygwin32*)
+ target_configdirs="$target_configdirs target-winsup"
+ noconfigdirs="$noconfigdirs target-gperf target-libgloss"
# always build newlib.
skipdirs=`echo " ${skipdirs} " | sed -e 's/ target-newlib / /'`
# Can't build gdb for cygwin32 if not native.
case "${host}" in
- *-*-cygwin32) ;; # keep gdb tcl tk expect etc.
- *) noconfigdirs="$noconfigdirs gdb tcl tk expect itcl db sn gnuserv"
+ *-*-cygwin32*) ;; # keep gdb tcl tk expect etc.
+ *) noconfigdirs="$noconfigdirs gdb tcl tk expect itcl tix libgui db snavigator gnuserv"
# start-sanitize-ide
- noconfigdirs="$noconfigdirs libide vmake"
+ noconfigdirs="$noconfigdirs libide vmake jstools"
# end-sanitize-ide
;;
esac
noconfigdirs="$noconfigdirs target-libgloss"
;;
mn10300-*-*)
- noconfigdirs="$noconfigdirs target-libgloss"
+ noconfigdirs="$noconfigdirs"
;;
powerpc-*-aix*)
# copied from rs6000-*-* entry
- noconfigdirs="$noconfigdirs gprof cvs target-libgloss"
+ noconfigdirs="$noconfigdirs gprof cvssrc target-libgloss"
# This is needed until gcc and ld are fixed to work together.
use_gnu_ld=no
;;
powerpc*-*-winnt* | powerpc*-*-pe* | ppc*-*-pe)
target_configdirs="$target_configdirs target-winsup"
- noconfigdirs="$noconfigdirs gdb tcl tk make expect target-libgloss itcl db sn gnuserv"
+ noconfigdirs="$noconfigdirs gdb tcl tk make expect target-libgloss itcl tix db snavigator gnuserv"
# start-sanitize-ide
- noconfigdirs="$noconfigdirs libide vmake"
+ noconfigdirs="$noconfigdirs libide vmake jstools"
# end-sanitize-ide
# always build newlib.
skipdirs=`echo " ${skipdirs} " | sed -e 's/ target-newlib / /'`
;;
# This is temporary until we can link against shared libraries
powerpcle-*-solaris*)
- noconfigdirs="$noconfigdirs gdb sim make tcl tk expect itcl db sn gnuserv"
+ noconfigdirs="$noconfigdirs gdb sim make tcl tk expect itcl tix db snavigator gnuserv"
# start-sanitize-ide
- noconfigdirs="$noconfigdirs libide vmake"
+ noconfigdirs="$noconfigdirs libide vmake jstools"
# end-sanitize-ide
;;
rs6000-*-lynxos*)
# The CVS server code doesn't work on the RS/6000
# Newlib makes problems for libg++ in crosses.
- noconfigdirs="$noconfigdirs target-newlib gprof cvs"
+ noconfigdirs="$noconfigdirs target-newlib gprof cvssrc"
;;
rs6000-*-aix*)
noconfigdirs="$noconfigdirs gprof"
sh-*-*)
case "${host}" in
i[3456]86-*-vsta) ;; # don't add gprof back in
- i[3456]86-*-go32) ;; # don't add gprof back in
+ i[3456]86-*-go32*) ;; # don't add gprof back in
+ i[3456]86-*-msdosdjgpp*) ;; # don't add gprof back in
*) skipdirs=`echo " ${skipdirs} " | sed -e 's/ gprof / /'` ;;
esac
noconfigdirs="$noconfigdirs target-libgloss"
;;
+ sparc-*-elf*)
+ if [ x${is_cross_compiler} != xno ] ; then
+ target_configdirs="${target_configdirs} target-cygmon"
+ fi
+ ;;
+ sparc64-*-elf*)
+ if [ x${is_cross_compiler} != xno ] ; then
+ target_configdirs="${target_configdirs} target-cygmon"
+ fi
+ ;;
+ sparclite-*-aout*)
+ if [ x${is_cross_compiler} != xno ] ; then
+ target_configdirs="${target_configdirs} target-cygmon"
+ fi
+ ;;
sparc-*-sunos4*)
if [ x${is_cross_compiler} != xno ] ; then
noconfigdirs="$noconfigdirs gdb gdbtest target-newlib target-libgloss"
use_gnu_ld=no
fi
;;
+# start-sanitize-sky
+ dvp-*-elf*)
+ noconfigdirs="$noconfigdirs gcc gdb sim"
+ noconfigdirs="$noconfigdirs itcl libgui tk tix"
+ noconfigdirs="$noconfigdirs target-newlib target-libgloss target-libiberty"
+ noconfigdirs="$noconfigdirs target-librx target-libg++ target-libstdc++ target-libio"
+ ;;
+# end-sanitize-sky
v810-*-*)
noconfigdirs="$noconfigdirs bfd binutils gas gcc gdb ld target-libio target-libg++ target-libstdc++ opcodes target-libgloss"
;;
-# start-sanitize-v850
v850-*-*)
noconfigdirs="$noconfigdirs target-libgloss"
;;
-# end-sanitize-v850
+# start-sanitize-v850e
+ v850e-*-*)
+ noconfigdirs="$noconfigdirs target-libgloss"
+ ;;
+ v850ea-*-*)
+ noconfigdirs="$noconfigdirs target-libgloss"
+ ;;
+# end-sanitize-v850e
vax-*-vms)
noconfigdirs="$noconfigdirs bfd binutils gdb ld target-newlib opcodes target-libgloss"
;;
;;
esac
-# targets that need a second pass
-case "${target}" in
- *-gm-magic*)
- noconfigdirs="$noconfigdirs target-libgloss"
- ;;
-esac
-
# If we aren't building newlib, then don't build libgloss, since libgloss
# depends upon some newlib header files.
case "${noconfigdirs}" in
*target-newlib*) noconfigdirs="$noconfigdirs target-libgloss" ;;
esac
-# If we are building a Canadian Cross, discard tools that can not be built
-# using a cross compiler. FIXME: These tools should be fixed.
-if [ "${build}" != "${host}" ]; then
- noconfigdirs="$noconfigdirs expect dejagnu"
-fi
-
# Make sure we don't let GNU ld be added if we didn't want it.
if [ x$with_gnu_ld = xno ]; then
use_gnu_ld=no
if [ x${shared} = xyes ]; then
case "${target}" in
- hppa*) target_makefile_frag=config/mt-papic ;;
- i[3456]86-*) target_makefile_frag=config/mt-x86pic ;;
- powerpc*-*) target_makefile_frag=config/mt-ppcpic ;;
- *) target_makefile_frag=config/mt-${target_cpu}pic ;;
+ hppa*)
+ target_makefile_frag="${target_makefile_frag} config/mt-papic"
+ ;;
+ i[3456]86-*)
+ target_makefile_frag="${target_makefile_frag} config/mt-x86pic"
+ ;;
+ powerpc*-*)
+ target_makefile_frag="${target_makefile_frag} config/mt-ppcpic"
+ ;;
+ alpha-*-linux*)
+ target_makefile_frag="${target_makefile_frag} config/mt-elfalphapic"
+ ;;
+ *)
+ if test -f ${srcdir}/config/mt-${target_cpu}pic; then
+ target_makefile_frag="${target_makefile_frag} config/mt-${target_cpu}pic"
+ fi
+ ;;
esac
fi
+rm -f mt-frag
+if [ -n "${target_makefile_frag}" ] ; then
+ for f in ${target_makefile_frag}
+ do
+ cat ${srcdir}/$f >> mt-frag
+ done
+ target_makefile_frag=mt-frag
+fi
+
# post-target:
# Make sure that the compiler is able to generate an executable. If it
case "${host}" in
*-*-hpux*)
- sed -e 's/RPATH_ENVVAR[ ]*=.*$/RPATH_ENVVAR = SHLIB_PATH/' \
+ sed -e 's/^RPATH_ENVVAR[ ]*=.*$/RPATH_ENVVAR = SHLIB_PATH/' \
Makefile > Makefile.tem
rm -f Makefile
mv -f Makefile.tem Makefile
esac
fi
+# If we are building for a win32 host, then set INSTALL_PROGRAM_ARGS to
+# -x. This will cause programs to be installed with .exe extensions.
+case "${host}" in
+*-*-cygwin32* | i[3456]86-*-mingw32)
+ sed -e 's/^INSTALL_PROGRAM_ARGS[ ]*=.*$/INSTALL_PROGRAM_ARGS = -x/' \
+ Makefile > Makefile.tem
+ rm -f Makefile
+ mv -f Makefile.tem Makefile
+ ;;
+esac
+
# Record target_configdirs and the configure arguments in Makefile.
target_configdirs=`echo "${target_configdirs}" | sed -e 's/target-//g'`
targargs=`echo "${arguments}" | \
projects / deliverable / binutils-gdb.git / blobdiff