# these libraries are used by various programs built for the host environment
#
-host_libs="mmalloc libiberty opcodes bfd readline gash db tcl tk tclX itcl tix"
+host_libs="mmalloc libiberty opcodes bfd readline gash db tcl tk tclX itcl tix libgui"
# start-sanitize-ide
host_libs="${host_libs} libide"
# end-sanitize-ide
# these tools are built for the host environment
# Note, the powerpc-eabi build depends on sim occurring before gdb in order to
# know that we are building the simulator.
-host_tools="texinfo byacc flex bison binutils ld gas gcc sim gdb make patch prms send-pr gprof gdbtest tgas etc expect dejagnu bash m4 autoconf automake ispell grep diff rcs cvs fileutils shellutils time textutils wdiff find emacs emacs19 uudecode hello tar gzip indent recode release sed utils guile perl apache inet gawk findutils sn"
+host_tools="texinfo byacc flex bison binutils ld gas gcc sim gdb make patch prms send-pr gprof gdbtest tgas etc expect dejagnu bash m4 autoconf automake ispell grep diff rcs cvssrc fileutils shellutils time textutils wdiff find emacs emacs19 uudecode hello tar gzip indent recode release sed utils guile perl apache inet gawk findutils snavigator libtool"
# start-sanitize-ide
host_tools="${host_tools} ilu vmake jstools"
# end-sanitize-ide
#
# This must be a single line because of the way it is searched by grep in
# the code below.
-native_only="autoconf automake cvs emacs emacs19 fileutils find gawk grep gzip hello indent ispell m4 rcs recode sed shellutils tar textutils gash uudecode wdiff gprof target-groff guile perl apache inet time bash prms sn gnuserv target-gperf"
+native_only="autoconf automake cvssrc emacs emacs19 fileutils find gawk grep gzip hello indent ispell m4 rcs recode sed shellutils tar textutils gash uudecode wdiff gprof target-groff guile perl apache inet time bash prms snavigator gnuserv target-gperf libtool"
# directories to be built in a cross environment only
#
-cross_only="target-libgloss target-newlib"
+cross_only="target-libgloss target-newlib target-cygmon target-opcodes"
## All tools belong in one of the four categories, and are assigned above
## We assign ${configdirs} this way to remove all embedded newlines. This
# Work in distributions that contain no compiler tools, like Autoconf.
if [ -d ${srcdir}/config ]; then
case "${host}" in
- m68k-hp-hpux*) host_makefile_frag=config/mh-hp300 ;;
- m68k-apollo-sysv*) host_makefile_frag=config/mh-apollo68 ;;
- m68k-apollo-bsd*) host_makefile_frag=config/mh-a68bsd ;;
- m88k-dg-dgux*) host_makefile_frag=config/mh-dgux ;;
- m88k-harris-cxux*) host_makefile_frag=config/mh-cxux ;;
- m88k-motorola-sysv*) host_makefile_frag=config/mh-delta88;;
- mips*-dec-ultrix*) host_makefile_frag=config/mh-decstation ;;
- mips*-nec-sysv4*) host_makefile_frag=config/mh-necv4 ;;
- mips*-sgi-irix6*) host_makefile_frag=config/mh-irix6 ;;
- mips*-sgi-irix5*) host_makefile_frag=config/mh-irix5 ;;
- mips*-sgi-irix4*) host_makefile_frag=config/mh-irix4 ;;
- mips*-sgi-irix3*) host_makefile_frag=config/mh-sysv ;;
- mips*-*-sysv4*) host_makefile_frag=config/mh-sysv4 ;;
- mips*-*-sysv*) host_makefile_frag=config/mh-riscos ;;
- i[3456]86-*-dgux*) host_makefile_frag=config/mh-dgux386 ;;
- i[3456]86-ncr-sysv4.3) host_makefile_frag=config/mh-ncrsvr43 ;;
- i[3456]86-ncr-sysv4*) host_makefile_frag=config/mh-ncr3000 ;;
- i[3456]86-*-sco3.2v5*) host_makefile_frag=config/mh-sysv ;;
- i[3456]86-*-sco*) host_makefile_frag=config/mh-sco ;;
- i[3456]86-*-isc*) host_makefile_frag=config/mh-sysv ;;
- i[3456]86-*-solaris2*) host_makefile_frag=config/mh-sysv4 ;;
- i[3456]86-*-aix*) host_makefile_frag=config/mh-aix386 ;;
- i[3456]86-*-go32*) host_makefile_frag=config/mh-go32 ;;
- i[3456]86-*-msdosdjgpp*) host_makefile_frag=config/mh-go32 ;;
- *-cygwin32*) host_makefile_frag=config/mh-cygwin32 ;;
- *-windows*) host_makefile_frag=config/mh-windows ;;
- vax-*-ultrix2*) host_makefile_frag=config/mh-vaxult2 ;;
- *-*-solaris2*) host_makefile_frag=config/mh-solaris ;;
- m68k-sun-sunos*) host_makefile_frag=config/mh-sun3 ;;
- *-hp-hpux[78]*) host_makefile_frag=config/mh-hpux8 ;;
- *-hp-hpux*) host_makefile_frag=config/mh-hpux ;;
- *-*-hiux*) host_makefile_frag=config/mh-hpux ;;
- rs6000-*-lynxos*) host_makefile_frag=config/mh-lynxrs6k ;;
- *-*-lynxos*) host_makefile_frag=config/mh-lynxos ;;
- *-*-sysv4*) host_makefile_frag=config/mh-sysv4 ;;
- *-*-sysv*) host_makefile_frag=config/mh-sysv ;;
+ m68k-hp-hpux*)
+ host_makefile_frag="${host_makefile_frag} config/mh-hp300"
+ ;;
+ m68k-apollo-sysv*)
+ host_makefile_frag="${host_makefile_frag} config/mh-apollo68"
+ ;;
+ m68k-apollo-bsd*)
+ host_makefile_frag="${host_makefile_frag} config/mh-a68bsd"
+ ;;
+ m88k-dg-dgux*)
+ host_makefile_frag="${host_makefile_frag} config/mh-dgux"
+ ;;
+ m88k-harris-cxux*)
+ host_makefile_frag="${host_makefile_frag} config/mh-cxux"
+ ;;
+ m88k-motorola-sysv*)
+ host_makefile_frag="${host_makefile_frag} config/mh-delta88"
+ ;;
+ mips*-dec-ultrix*)
+ host_makefile_frag="${host_makefile_frag} config/mh-decstation"
+ ;;
+ mips*-nec-sysv4*)
+ host_makefile_frag="${host_makefile_frag} config/mh-necv4"
+ ;;
+ mips*-sgi-irix6*)
+ host_makefile_frag="${host_makefile_frag} config/mh-irix6"
+ ;;
+ mips*-sgi-irix5*)
+ host_makefile_frag="${host_makefile_frag} config/mh-irix5"
+ ;;
+ mips*-sgi-irix4*)
+ host_makefile_frag="${host_makefile_frag} config/mh-irix4"
+ ;;
+ mips*-sgi-irix3*)
+ host_makefile_frag="${host_makefile_frag} config/mh-sysv"
+ ;;
+ mips*-*-sysv4*)
+ host_makefile_frag="${host_makefile_frag} config/mh-sysv4"
+ ;;
+ mips*-*-sysv*)
+ host_makefile_frag="${host_makefile_frag} config/mh-riscos"
+ ;;
+ i[3456]86-*-dgux*)
+ host_makefile_frag="${host_makefile_frag} config/mh-dgux386"
+ ;;
+ i[3456]86-ncr-sysv4.3*)
+ host_makefile_frag="${host_makefile_frag} config/mh-ncrsvr43"
+ ;;
+ i[3456]86-ncr-sysv4*)
+ host_makefile_frag="${host_makefile_frag} config/mh-ncr3000"
+ ;;
+ i[3456]86-*-sco3.2v5*)
+ host_makefile_frag="${host_makefile_frag} config/mh-sysv"
+ ;;
+ i[3456]86-*-sco*)
+ host_makefile_frag="${host_makefile_frag} config/mh-sco"
+ ;;
+ i[3456]86-*-isc*)
+ host_makefile_frag="${host_makefile_frag} config/mh-sysv"
+ ;;
+ i[3456]86-*-solaris2*)
+ host_makefile_frag="${host_makefile_frag} config/mh-sysv4"
+ ;;
+ i[3456]86-*-aix*)
+ host_makefile_frag="${host_makefile_frag} config/mh-aix386"
+ ;;
+ i[3456]86-*-go32*)
+ host_makefile_frag="${host_makefile_frag} config/mh-go32"
+ ;;
+ i[3456]86-*-msdosdjgpp*)
+ host_makefile_frag="${host_makefile_frag} config/mh-go32"
+ ;;
+ *-cygwin32*)
+ host_makefile_frag="${host_makefile_frag} config/mh-cygwin32"
+ ;;
+ *-mingw32*)
+ host_makefile_frag="${host_makefile_frag} config/mh-mingw32"
+ ;;
+# start-sanitize-mswin
+ *-windows*)
+ host_makefile_frag="${host_makefile_frag} config/mh-windows"
+ ;;
+# end-sanitize-mswin
+ vax-*-ultrix2*)
+ host_makefile_frag="${host_makefile_frag} config/mh-vaxult2"
+ ;;
+ *-*-solaris2*)
+ host_makefile_frag="${host_makefile_frag} config/mh-solaris"
+ ;;
+ m68k-sun-sunos*)
+ host_makefile_frag="${host_makefile_frag} config/mh-sun3"
+ ;;
+ *-hp-hpux[78]*)
+ host_makefile_frag="${host_makefile_frag} config/mh-hpux8"
+ ;;
+ *-hp-hpux*)
+ host_makefile_frag="${host_makefile_frag} config/mh-hpux"
+ ;;
+ *-*-hiux*)
+ host_makefile_frag="${host_makefile_frag} config/mh-hpux"
+ ;;
+ rs6000-*-lynxos*)
+ host_makefile_frag="${host_makefile_frag} config/mh-lynxrs6k"
+ ;;
+ *-*-lynxos*)
+ host_makefile_frag="${host_makefile_frag} config/mh-lynxos"
+ ;;
+ *-*-sysv4*)
+ host_makefile_frag="${host_makefile_frag} config/mh-sysv4"
+ ;;
+ *-*-sysv*)
+ host_makefile_frag="${host_makefile_frag} config/mh-sysv"
+ ;;
esac
fi
esac
if [ x${shared} = xyes ]; then
- waugh=
case "${host}" in
- hppa*) waugh=config/mh-papic ;;
- i[3456]86-*) waugh=config/mh-x86pic ;;
- sparc64-*) waugh=config/mh-sparcpic ;;
- powerpc*-*) waugh=config/mh-ppcpic ;;
- *) waugh=config/mh-${host_cpu}pic ;;
+ hppa*)
+ host_makefile_frag="${host_makefile_frag} config/mh-papic"
+ ;;
+ i[3456]86-*)
+ host_makefile_frag="${host_makefile_frag} config/mh-x86pic"
+ ;;
+ sparc64-*)
+ host_makefile_frag="${host_makefile_frag} config/mh-sparcpic"
+ ;;
+ powerpc*-*)
+ host_makefile_frag="${host_makefile_frag} config/mh-ppcpic"
+ ;;
+ alpha-*-linux*)
+ host_makefile_frag="${host_makefile_frag} config/mh-elfalphapic"
+ ;;
+ *)
+ if test -f ${srcdir}/config/mh-${host_cpu}pic; then
+ host_makefile_frag="${host_makefile_frag} config/mh-${host_cpu}pic"
+ fi
+ ;;
esac
- if [ -f ${srcdir}/${waugh} ]; then
- if [ -n "${host_makefile_frag}" ] ; then
- cat ${srcdir}/${host_makefile_frag} > mh-frag
- cat ${srcdir}/${waugh} >> mh-frag
- host_makefile_frag=mh-frag
- else
- host_makefile_frag=${waugh}
- fi
- fi
+fi
+
+rm -f mh-frag
+if [ -n "${host_makefile_frag}" ] ; then
+ for f in ${host_makefile_frag}
+ do
+ cat ${srcdir}/$f >> mh-frag
+ done
+ host_makefile_frag=mh-frag
fi
# per-target:
case "${target}" in
- v810*) target_makefile_frag=config/mt-v810 ;;
- i[3456]86-*-netware*) target_makefile_frag=config/mt-netware ;;
+ v810*)
+ target_makefile_frag="${target_makefile_frag} config/mt-v810"
+ ;;
+ i[3456]86-*-netware*)
+ target_makefile_frag="${target_makefile_frag} config/mt-netware"
+ ;;
+ powerpc-*-netware*)
+ target_makefile_frag="${target_makefile_frag} config/mt-netware"
+ ;;
# start-sanitize-r5900
- mips64r5900*-*-*) target_makefile_frag=config/mt-r5900 ;;
+ mips64r59*)
+ target_makefile_frag="${target_makefile_frag} config/mt-r5900"
+ ;;
# end-sanitize-r5900
- powerpc-*-netware*) target_makefile_frag=config/mt-netware ;;
- *-*-linux-gnu) target_makefile_frag=config/mt-linux ;;
+ *-*-linux-gnu)
+ target_makefile_frag="${target_makefile_frag} config/mt-linux"
+ ;;
esac
skipdirs=
yes | "") # the default value for this tree is that X11 is available
;;
no)
- skipdirs="${skipdirs} tk gash"
+ skipdirs="${skipdirs} tk libgui gash"
# start-sanitize-ide
skipdirs="${skipdirs} libide vmake jstools"
# end-sanitize-ide
case "${host}" in
i[3456]86-*-go32*)
configdirs="$configdirs dosrel" ;;
+ i[3456]86-*-mingw32*)
+ configdirs="$configdirs dosrel" ;;
*-cygwin32*)
configdirs="$configdirs dosrel" ;;
esac
case "${host}" in
i[3456]86-*-vsta)
- noconfigdirs="tcl expect dejagnu make texinfo bison patch flex byacc send-pr gprof uudecode dejagnu diff guile perl apache inet itcl tix db sn gnuserv"
+ noconfigdirs="tcl expect dejagnu make texinfo bison patch flex byacc send-pr gprof uudecode dejagnu diff guile perl apache inet itcl tix db snavigator gnuserv"
# start-sanitize-ide
noconfigdirs="$noconfigdirs libide vmake jstools"
# end-sanitize-ide
;;
i[3456]86-*-go32* | i[3456]86-*-msdosdjgpp*)
- noconfigdirs="tcl tk expect dejagnu make texinfo bison patch flex byacc send-pr uudecode dejagnu diff guile perl apache inet itcl tix db sn gnuserv"
+ noconfigdirs="tcl tk expect dejagnu make texinfo bison patch flex byacc send-pr uudecode dejagnu diff guile perl apache inet itcl tix db snavigator gnuserv"
# start-sanitize-ide
noconfigdirs="$noconfigdirs libide vmake jstools"
# end-sanitize-ide
;;
+ i[3456]86-*-mingw32*)
+ # noconfigdirs="tcl tk expect dejagnu make texinfo bison patch flex byacc send-pr uudecode dejagnu diff guile perl apache inet itcl tix db snavigator gnuserv"
+ noconfigdirs="expect dejagnu cvs autoconf automake send-pr gprof rcs guile perl texinfo apache inet libtool"
+ ;;
*-*-cygwin32)
- noconfigdirs="expect dejagnu cvs autoconf automake send-pr gprof rcs guile perl texinfo apache inet"
+ noconfigdirs="autoconf automake send-pr gprof rcs guile perl texinfo apache inet"
;;
*-*-windows*)
# This is only used to build WinGDB...
configdirs="bfd libiberty opcodes readline sim gdb"
target_configdirs=
;;
+ *-*-netbsd*)
+ noconfigdirs="rcs"
+ ;;
ppc*-*-pe)
- noconfigdirs="patch diff make tk tcl expect dejagnu cvs autoconf automake texinfo bison send-pr gprof rcs guile perl apache inet itcl tix db sn gnuserv"
+ noconfigdirs="patch diff make tk tcl expect dejagnu cvssrc autoconf automake texinfo bison send-pr gprof rcs guile perl apache inet itcl tix db snavigator gnuserv"
# start-sanitize-ide
noconfigdirs="$noconfigdirs libide vmake jstools"
# end-sanitize-ide
alpha*-*-*vms*)
noconfigdirs="$noconfigdirs gdb ld target-newlib target-libgloss"
;;
+ alpha-*-linux*)
+ # newlib is not 64 bit ready
+ noconfigdirs="$noconfigdirs target-newlib target-libgloss"
+ # linux has rx in libc
+ skipdirs="$skipdirs target-librx"
+ ;;
alpha*-*-*)
# newlib is not 64 bit ready
noconfigdirs="$noconfigdirs target-newlib target-libgloss"
arm-*-coff*)
noconfigdirs="$noconfigdirs target-libgloss"
;;
+ thumb-*-coff) # CYGNUS LOCAL nickc/thumb
+ noconfigdirs="$noconfigdirs target-libgloss"
+ ;;
arm-*-riscix*)
noconfigdirs="$noconfigdirs ld target-libgloss"
;;
;;
# start-sanitize-d30v
d30v-*-*)
- noconfigdirs="$noconfigdirs target-librx target-libg++ target-libstdc++ target-libio target-examples"
-# start-sanitize-ide
- noconfigdirs="$noconfigdirs libide vmake jstools"
-# end-sanitize-ide
;;
# end-sanitize-d30v
h8300*-*-* | \
# but don't build gdb
noconfigdirs="$noconfigdirs gdb target-libg++ target-libstdc++ target-libio target-librx"
;;
- *-*-cygwin32)
- target_configdirs="$target_configdirs target-winsup"
+ i[3456]86-*-mingw32*)
+ target_configdirs="$target_configdirs target-mingw"
noconfigdirs="$noconfigdirs expect target-libgloss"
+
+ # Can't build gdb for mingw32 if not native.
+ case "${host}" in
+ i[3456]86-*-mingw32) ;; # keep gdb tcl tk expect etc.
+ *) noconfigdirs="$noconfigdirs gdb tcl tk expect itcl tix db snavigator gnuserv"
+ ;;
+ esac
+ ;;
+ *-*-cygwin32*)
+ target_configdirs="$target_configdirs target-winsup"
+ noconfigdirs="$noconfigdirs target-gperf target-libgloss"
# always build newlib.
skipdirs=`echo " ${skipdirs} " | sed -e 's/ target-newlib / /'`
# Can't build gdb for cygwin32 if not native.
case "${host}" in
- *-*-cygwin32) ;; # keep gdb tcl tk expect etc.
- *) noconfigdirs="$noconfigdirs gdb tcl tk expect itcl tix db sn gnuserv"
+ *-*-cygwin32*) ;; # keep gdb tcl tk expect etc.
+ *) noconfigdirs="$noconfigdirs gdb tcl tk expect itcl tix libgui db snavigator gnuserv"
# start-sanitize-ide
noconfigdirs="$noconfigdirs libide vmake jstools"
# end-sanitize-ide
noconfigdirs="$noconfigdirs target-libgloss"
;;
mn10300-*-*)
- noconfigdirs="$noconfigdirs target-libgloss"
+ noconfigdirs="$noconfigdirs"
;;
powerpc-*-aix*)
# copied from rs6000-*-* entry
- noconfigdirs="$noconfigdirs gprof cvs target-libgloss"
+ noconfigdirs="$noconfigdirs gprof cvssrc target-libgloss"
# This is needed until gcc and ld are fixed to work together.
use_gnu_ld=no
;;
powerpc*-*-winnt* | powerpc*-*-pe* | ppc*-*-pe)
target_configdirs="$target_configdirs target-winsup"
- noconfigdirs="$noconfigdirs gdb tcl tk make expect target-libgloss itcl tix db sn gnuserv"
+ noconfigdirs="$noconfigdirs gdb tcl tk make expect target-libgloss itcl tix db snavigator gnuserv"
# start-sanitize-ide
noconfigdirs="$noconfigdirs libide vmake jstools"
# end-sanitize-ide
;;
# This is temporary until we can link against shared libraries
powerpcle-*-solaris*)
- noconfigdirs="$noconfigdirs gdb sim make tcl tk expect itcl tix db sn gnuserv"
+ noconfigdirs="$noconfigdirs gdb sim make tcl tk expect itcl tix db snavigator gnuserv"
# start-sanitize-ide
noconfigdirs="$noconfigdirs libide vmake jstools"
# end-sanitize-ide
rs6000-*-lynxos*)
# The CVS server code doesn't work on the RS/6000
# Newlib makes problems for libg++ in crosses.
- noconfigdirs="$noconfigdirs target-newlib gprof cvs"
+ noconfigdirs="$noconfigdirs target-newlib gprof cvssrc"
;;
rs6000-*-aix*)
noconfigdirs="$noconfigdirs gprof"
esac
noconfigdirs="$noconfigdirs target-libgloss"
;;
+ sparc-*-elf*)
+ if [ x${is_cross_compiler} != xno ] ; then
+ target_configdirs="${target_configdirs} target-cygmon"
+ fi
+ ;;
+ sparc64-*-elf*)
+ if [ x${is_cross_compiler} != xno ] ; then
+ target_configdirs="${target_configdirs} target-cygmon"
+ fi
+ ;;
+ sparclite-*-aout*)
+ if [ x${is_cross_compiler} != xno ] ; then
+ target_configdirs="${target_configdirs} target-cygmon"
+ fi
+ ;;
sparc-*-sunos4*)
if [ x${is_cross_compiler} != xno ] ; then
noconfigdirs="$noconfigdirs gdb gdbtest target-newlib target-libgloss"
use_gnu_ld=no
fi
;;
+# start-sanitize-sky
+ dvp-*-elf*)
+ noconfigdirs="$noconfigdirs gcc gdb sim"
+ noconfigdirs="$noconfigdirs itcl libgui tk tix"
+ noconfigdirs="$noconfigdirs target-newlib target-libgloss target-libiberty"
+ noconfigdirs="$noconfigdirs target-librx target-libg++ target-libstdc++ target-libio"
+ ;;
+# end-sanitize-sky
v810-*-*)
noconfigdirs="$noconfigdirs bfd binutils gas gcc gdb ld target-libio target-libg++ target-libstdc++ opcodes target-libgloss"
;;
v850e-*-*)
noconfigdirs="$noconfigdirs target-libgloss"
;;
- v850eq-*-*)
+ v850ea-*-*)
noconfigdirs="$noconfigdirs target-libgloss"
;;
# end-sanitize-v850e
*target-newlib*) noconfigdirs="$noconfigdirs target-libgloss" ;;
esac
-# If we are building a Canadian Cross, discard tools that can not be built
-# using a cross compiler. FIXME: These tools should be fixed.
-if [ "${build}" != "${host}" ]; then
- noconfigdirs="$noconfigdirs expect dejagnu"
-fi
-
# Make sure we don't let GNU ld be added if we didn't want it.
if [ x$with_gnu_ld = xno ]; then
use_gnu_ld=no
if [ x${shared} = xyes ]; then
case "${target}" in
- hppa*) target_makefile_frag=config/mt-papic ;;
- i[3456]86-*) target_makefile_frag=config/mt-x86pic ;;
- powerpc*-*) target_makefile_frag=config/mt-ppcpic ;;
- *) target_makefile_frag=config/mt-${target_cpu}pic ;;
+ hppa*)
+ target_makefile_frag="${target_makefile_frag} config/mt-papic"
+ ;;
+ i[3456]86-*)
+ target_makefile_frag="${target_makefile_frag} config/mt-x86pic"
+ ;;
+ powerpc*-*)
+ target_makefile_frag="${target_makefile_frag} config/mt-ppcpic"
+ ;;
+ alpha-*-linux*)
+ target_makefile_frag="${target_makefile_frag} config/mt-elfalphapic"
+ ;;
+ *)
+ if test -f ${srcdir}/config/mt-${target_cpu}pic; then
+ target_makefile_frag="${target_makefile_frag} config/mt-${target_cpu}pic"
+ fi
+ ;;
esac
fi
+rm -f mt-frag
+if [ -n "${target_makefile_frag}" ] ; then
+ for f in ${target_makefile_frag}
+ do
+ cat ${srcdir}/$f >> mt-frag
+ done
+ target_makefile_frag=mt-frag
+fi
+
# post-target:
# Make sure that the compiler is able to generate an executable. If it
case "${host}" in
*-*-hpux*)
- sed -e 's/RPATH_ENVVAR[ ]*=.*$/RPATH_ENVVAR = SHLIB_PATH/' \
+ sed -e 's/^RPATH_ENVVAR[ ]*=.*$/RPATH_ENVVAR = SHLIB_PATH/' \
Makefile > Makefile.tem
rm -f Makefile
mv -f Makefile.tem Makefile
esac
fi
-# If we are building for a cygwin32 host, then set INSTALL_PROGRAM_ARGS to
+# If we are building for a win32 host, then set INSTALL_PROGRAM_ARGS to
# -x. This will cause programs to be installed with .exe extensions.
case "${host}" in
-*-*-cygwin32*)
+*-*-cygwin32* | i[3456]86-*-mingw32)
sed -e 's/^INSTALL_PROGRAM_ARGS[ ]*=.*$/INSTALL_PROGRAM_ARGS = -x/' \
Makefile > Makefile.tem
rm -f Makefile
projects / deliverable / binutils-gdb.git / blobdiff