# these tools are built for the host environment
#
-host_tools="texinfo byacc flex bison binutils ld gas gcc gdb make patch
- prms send-pr gprof gdbtest tgas etc expect dejagnu sim
- m4 autoconf ispell grep diff rcs cvs fileutils shellutils
- textutils wdiff find emacs emacs19 uudecode hello tar gzip indent
- recode release sed utils guile perl apache inet"
+host_tools="texinfo byacc flex bison binutils ld gas gcc gdb make patch prms send-pr gprof gdbtest tgas etc expect dejagnu sim bash m4 autoconf ispell grep diff rcs cvs fileutils shellutils time textutils wdiff find emacs emacs19 uudecode hello tar gzip indent recode release sed utils guile perl apache inet gawk findutils"
# these libraries are built for the target environment, and are built after
# directories to be built in the native environment only
#
-native_only="autoconf cvs emacs emacs19 fileutils find grep gzip hello
- indent ispell m4 rcs recode sed shellutils tar textutils gash
- uudecode wdiff gprof target-groff guile perl apache inet"
+# This must be a single line because of the way it is searched by grep in
+# the code below.
+native_only="autoconf cvs emacs emacs19 fileutils find gawk grep gzip hello indent ispell m4 rcs recode sed shellutils tar textutils gash uudecode wdiff gprof target-groff guile perl apache inet time bash prms"
# directories to be built in a cross environment only
#
m68k-hp-hpux*) host_makefile_frag=config/mh-hp300 ;;
m68k-apollo-sysv*) host_makefile_frag=config/mh-apollo68 ;;
m68k-apollo-bsd*) host_makefile_frag=config/mh-a68bsd ;;
- m68k-*-linux*) host_makefile_frag=config/mh-linux ;;
m88k-dg-dgux*) host_makefile_frag=config/mh-dgux ;;
m88k-harris-cxux*) host_makefile_frag=config/mh-cxux ;;
m88k-motorola-sysv*) host_makefile_frag=config/mh-delta88;;
mips*-dec-ultrix*) host_makefile_frag=config/mh-decstation ;;
mips*-nec-sysv4*) host_makefile_frag=config/mh-necv4 ;;
- mips*-sgi-irix[56]*) host_makefile_frag=config/mh-irix5 ;;
+ mips*-sgi-irix6*) host_makefile_frag=config/mh-irix6 ;;
+ mips*-sgi-irix5*) host_makefile_frag=config/mh-irix5 ;;
mips*-sgi-irix4*) host_makefile_frag=config/mh-irix4 ;;
mips*-sgi-irix3*) host_makefile_frag=config/mh-sysv ;;
mips*-*-sysv4*) host_makefile_frag=config/mh-sysv4 ;;
mips*-*-sysv*) host_makefile_frag=config/mh-riscos ;;
- i[345]86-ncr-sysv4.3) host_makefile_frag=config/mh-ncrsvr43 ;;
- i[345]86-ncr-sysv4*) host_makefile_frag=config/mh-ncr3000 ;;
- i[345]86-*-sco3.2v5*) host_makefile_frag=config/mh-sysv ;;
- i[345]86-*-sco*) host_makefile_frag=config/mh-sco ;;
- i[345]86-*-isc*) host_makefile_frag=config/mh-sysv ;;
- i[345]86-*-linux*) host_makefile_frag=config/mh-linux ;;
- i[345]86-*-solaris2*) host_makefile_frag=config/mh-sysv4 ;;
- i[345]86-*-aix*) host_makefile_frag=config/mh-aix386 ;;
- i[345]86-*-go32*) host_makefile_frag=config/mh-go32 ;;
+ i[3456]86-*-dgux*) host_makefile_frag=config/mh-dgux386 ;;
+ i[3456]86-ncr-sysv4.3) host_makefile_frag=config/mh-ncrsvr43 ;;
+ i[3456]86-ncr-sysv4*) host_makefile_frag=config/mh-ncr3000 ;;
+ i[3456]86-*-sco3.2v5*) host_makefile_frag=config/mh-sysv ;;
+ i[3456]86-*-sco*) host_makefile_frag=config/mh-sco ;;
+ i[3456]86-*-isc*) host_makefile_frag=config/mh-sysv ;;
+ i[3456]86-*-solaris2*) host_makefile_frag=config/mh-sysv4 ;;
+ i[3456]86-*-aix*) host_makefile_frag=config/mh-aix386 ;;
+ i[3456]86-*-go32*) host_makefile_frag=config/mh-go32 ;;
+ *-cygwin32*) host_makefile_frag=config/mh-cygwin32 ;;
+ *-windows*) host_makefile_frag=config/mh-windows ;;
vax-*-ultrix2*) host_makefile_frag=config/mh-vaxult2 ;;
*-*-solaris2*) host_makefile_frag=config/mh-solaris ;;
m68k-sun-sunos*) host_makefile_frag=config/mh-sun3 ;;
waugh=
case "${host}" in
hppa*) waugh=config/mh-papic ;;
- i[345]86-*) waugh=config/mh-x86pic ;;
+ i[3456]86-*) waugh=config/mh-x86pic ;;
sparc64-*) waugh=config/mh-sparcpic ;;
*) waugh=config/mh-${host_cpu}pic ;;
esac
case "${target}" in
v810*) target_makefile_frag=config/mt-v810 ;;
- i[345]86-*-netware*) target_makefile_frag=config/mt-netware ;;
+ i[3456]86-*-netware*) target_makefile_frag=config/mt-netware ;;
powerpc-*-netware*) target_makefile_frag=config/mt-netware ;;
esac
# Default to using --with-stabs for certain targets.
if [ x${with_stabs} = x ]; then
case "${target}" in
- mips*-*-* | alpha*-*-osf* | i[345]86*-*-sysv4* | i[345]86*-*-unixware*)
+ mips*-*-irix6*)
+ ;;
+ mips*-*-* | alpha*-*-osf* | i[3456]86*-*-sysv4* | i[3456]86*-*-unixware*)
with_stabs=yes;
withoptions="${withoptions} --with-stabs"
;;
# Configure extra directories which are host specific
case "${host}" in
- i[345]86-*-go32*)
+ i[3456]86-*-go32*)
+ configdirs="$configdirs dosrel" ;;
+ *-cygwin32*)
configdirs="$configdirs dosrel" ;;
esac
noconfigdirs=""
case "${host}" in
- i[345]86-*-vsta)
+ i[3456]86-*-vsta)
noconfigdirs="tcl expect dejagnu make texinfo bison patch flex byacc send-pr gprof uudecode dejagnu diff guile perl apache inet"
;;
- i[345]86-*-go32)
+ i[3456]86-*-go32)
noconfigdirs="tcl tk expect dejagnu make texinfo bison patch flex byacc send-pr gprof uudecode dejagnu diff guile perl apache inet"
;;
*-*-cygwin32)
- noconfigdirs="patch diff tk tcl expect dejagnu cvs autoconf texinfo bison send-pr gprof rcs guile perl apache inet"
+ noconfigdirs="tk tcl expect dejagnu cvs autoconf bison send-pr gprof rcs guile perl texinfo apache inet"
+ ;;
+ *-*-windows*)
+# This is only used to build WinGDB...
+ configdirs="bfd gdb libiberty opcodes readline sim"
+ target_configdirs=
;;
ppc*-*-pe)
noconfigdirs="patch diff make tk tcl expect dejagnu cvs autoconf texinfo bison send-pr gprof rcs guile perl apache inet"
*-*-vxworks*)
noconfigdirs="$noconfigdirs target-newlib target-libgloss"
;;
- *-*-ose)
- noconfigdirs="$noconfigdirs target-libgloss"
- ;;
alpha-dec-osf*)
# ld works, but does not support shared libraries. emacs doesn't
# work. newlib is not 64 bit ready. I'm not sure about fileutils or grep.
# gas doesn't generate exception information.
noconfigdirs="$noconfigdirs gas ld emacs fileutils grep target-newlib target-libgloss"
;;
+ alpha*-*-*vms*)
+ noconfigdirs="$noconfigdirs gdb ld target-newlib target-libgloss"
+ ;;
alpha*-*-*)
# newlib is not 64 bit ready
noconfigdirs="$noconfigdirs target-newlib target-libgloss"
arm-*-pe*)
noconfigdirs="$noconfigdirs target-libgloss"
;;
+ arm-*-coff*)
+ noconfigdirs="$noconfigdirs target-libgloss"
+ ;;
arm-*-riscix*)
noconfigdirs="$noconfigdirs ld target-libgloss"
;;
+# start-sanitize-d10v
+ d10v-*-*)
+ noconfigdirs="$noconfigdirs target-librx target-libg++ target-libstdc++ target-libio target-libgloss"
+ ;;
+# end-sanitize-d10v
h8300*-*-* | \
h8500-*-*)
noconfigdirs="$noconfigdirs target-libg++ target-libstdc++ target-libio target-librx target-libgloss"
esac
noconfigdirs="$noconfigdirs ld shellutils"
;;
- i[345]86-*-go32)
+ i[3456]86-*-go32)
# but don't build gdb
noconfigdirs="$noconfigdirs gdb target-libg++ target-libstdc++ target-libio target-librx"
;;
skipdirs=`echo " ${skipdirs} " | sed -e 's/ target-newlib / /'`
# Can't build gdb for cygwin32 if not native.
- case "${host}:${build}" in
- *-*-cygwin32 | *-*-cygwin32:*-*-cygwin32) ;; # keep gdb
+ case "${host}" in
+ *-*-cygwin32) ;; # keep gdb
*) noconfigdirs="$noconfigdirs gdb"
esac
;;
- i[345]86-*-pe)
+ i[3456]86-*-pe)
noconfigdirs="$noconfigdirs target-libg++ target-libstdc++ target-libio target-librx target-libgloss"
;;
- i[345]86-*-sco3.2v5*)
+ i[3456]86-*-sco3.2v5*)
# The linker does not yet know about weak symbols in COFF,
# and is not configured to handle mixed ELF and COFF.
noconfigdirs="$noconfigdirs gprof ld target-libgloss"
;;
- i[345]86-*-sco*)
+ i[3456]86-*-sco*)
noconfigdirs="$noconfigdirs gprof target-libgloss"
;;
- i[345]86-*-solaris2*)
+ i[3456]86-*-solaris2*)
# The linker does static linking correctly, but the Solaris C library
# has bugs such that some important functions won't work when statically
# linked. (See man pages for getpwuid, for example.)
noconfigdirs="$noconfigdirs ld target-libgloss"
;;
- i[345]86-*-sysv4*)
+ i[3456]86-*-sysv4*)
# The SYSV4 C compiler doesn't handle Emacs correctly
case "${CC}" in
"" | cc*) noconfigdirs="$noconfigdirs emacs emacs19" ;;
# but that's okay since emacs doesn't work anyway
noconfigdirs="$noconfigdirs emacs emacs19 target-libgloss"
;;
+ mn10200-*-*)
+ noconfigdirs="$noconfigdirs target-libgloss"
+ ;;
+ mn10300-*-*)
+ noconfigdirs="$noconfigdirs target-libgloss"
+ ;;
powerpc-*-aix*)
# copied from rs6000-*-* entry
noconfigdirs="$noconfigdirs gprof cvs target-libgloss"
# emacs is emacs 18, which does not work on Irix 5 (emacs19 does work)
noconfigdirs="$noconfigdirs ld gprof emacs target-libgloss"
;;
+ mips*-*-irix6*)
+ # The GNU linker does not support shared libraries.
+ # emacs is emacs 18, which does not work on Irix 5 (emacs19 does work)
+ noconfigdirs="$noconfigdirs ld gas gprof emacs target-libgloss"
+ ;;
mips*-dec-bsd*)
noconfigdirs="$noconfigdirs gprof target-libgloss"
;;
;;
sh-*-*)
case "${host}" in
- i[345]86-*-vsta) ;; # don't add gprof back in
- i[345]86-*-go32) ;; # don't add gprof back in
+ i[3456]86-*-vsta) ;; # don't add gprof back in
+ i[3456]86-*-go32) ;; # don't add gprof back in
*) skipdirs=`echo " ${skipdirs} " | sed -e 's/ gprof / /'` ;;
esac
noconfigdirs="$noconfigdirs target-libgloss"
use_gnu_ld=no
fi
;;
+# start-sanitize-tic80
+ tic80-*-*)
+ noconfigdirs="$noconfigdirs gcc gdb ld target-libio target-libg++ target-libstdc++ target-libgloss"
+ ;;
+# end-sanitize-tic80
v810-*-*)
noconfigdirs="$noconfigdirs bfd binutils gas gcc gdb ld target-libio target-libg++ target-libstdc++ opcodes target-libgloss"
;;
+# start-sanitize-v850
+ v850-*-*)
+ noconfigdirs="$noconfigdirs target-libgloss"
+ ;;
+# end-sanitize-v850
vax-*-vms)
noconfigdirs="$noconfigdirs bfd binutils gdb ld target-newlib opcodes target-libgloss"
;;
# If we are building a Canadian Cross, discard tools that can not be built
# using a cross compiler. FIXME: These tools should be fixed.
if [ "${build}" != "${host}" ]; then
- noconfigdirs="$noconfigdirs expect dejagnu make texinfo diff"
+ noconfigdirs="$noconfigdirs tcl tk expect dejagnu"
fi
# Make sure we don't let GNU ld be added if we didn't want it.
fi
fi
+# If using newlib, add --with-newlib to the withoptions so that gcc/configure
+# can detect this case.
+
+if [ x${with_newlib} != xno ] && echo " ${target_configdirs} " | grep " target-newlib " > /dev/null 2>&1 && [ -d ${srcdir}/newlib ] ; then
+ with_newlib=yes
+ withoptions="$withoptions --with-newlib"
+fi
+
if [ x${shared} = xyes ]; then
case "${target}" in
hppa*) target_makefile_frag=config/mt-papic ;;
- i[345]86-*) target_makefile_frag=config/mt-x86pic ;;
+ i[3456]86-*) target_makefile_frag=config/mt-x86pic ;;
*) target_makefile_frag=config/mt-${target_cpu}pic ;;
esac
fi
projects / deliverable / binutils-gdb.git / blobdiff