# these libraries are used by various programs built for the host environment
#
-host_libs="intl mmalloc libiberty opcodes bfd readline gash db tcl tk tcl8.1 tk8.1 tclX itcl tix libgui zlib"
-
-if [ "${enable_gdbgui}" = "yes" ] ; then
- host_libs="${host_libs} libgui"
-fi
+host_libs="intl mmalloc libiberty opcodes bfd readline db tcl tk tcl8.1 tk8.1 tclX itcl tix libgui zlib"
libstdcxx_version="target-libstdc++-v3"
# Don't use libstdc++-v3's flags to configure/build itself.
#
# This must be a single line because of the way it is searched by grep in
# the code below.
-native_only="autoconf automake libtool cvssrc emacs emacs19 fileutils find gawk gettext grep gzip hello indent ispell m4 rcs recode sed shellutils tar textutils gash uudecode wdiff gprof target-groff guile perl apache inet time ash bash bzip2 prms snavigator gnuserv target-gperf"
+native_only="autoconf automake libtool cvssrc emacs emacs19 fileutils find gawk gettext grep gzip hello indent ispell m4 rcs recode sed shellutils tar textutils uudecode wdiff gprof target-groff guile perl apache inet time ash bash bzip2 prms snavigator gnuserv target-gperf"
# directories to be built in a cross environment only
#
*-interix*)
host_makefile_frag="${host_makefile_frag} config/mh-interix"
;;
- *-windows*)
- host_makefile_frag="${host_makefile_frag} config/mh-windows"
- ;;
vax-*-ultrix2*)
# The old BSD pcc isn't up to compiling parts of gdb so use gcc
tentative_cc=gcc
- host_makefile_frag="${host_makefile_frag} config/mh-vaxult2"
;;
*-*-solaris2*)
host_makefile_frag="${host_makefile_frag} config/mh-solaris"
# Sun's C compiler needs the -J flag to be able to compile cp-parse.c
# without overflowing the jump tables (-J says to use a 32 bit table)
tentative_cc="cc -J"
- host_makefile_frag="${host_makefile_frag} config/mh-sun3"
;;
*-hp-hpux[78]*)
tentative_cc="cc -Wp,-H256000"
*-*-lynxos*)
# /bin/cc is less than useful for our purposes. Always use GCC
tentative_cc="/bin/gcc"
- host_makefile_frag="${host_makefile_frag} config/mh-lynxos"
;;
*-*-sysv4*)
host_makefile_frag="${host_makefile_frag} config/mh-sysv4"
*) shared=yes ;;
esac
-if [ x${shared} = xyes ]; then
- case "${host}" in
- alpha*-*-linux*)
- host_makefile_frag="${host_makefile_frag} config/mh-elfalphapic"
- ;;
- arm*-*-*)
- host_makefile_frag="${host_makefile_frag} config/mh-armpic"
- ;;
- parisc*-*-* | hppa*-*-*)
- host_makefile_frag="${host_makefile_frag} config/mh-papic"
- ;;
- i[3456]86-*-cygwin*)
- # We don't want -fPIC on Cygwin.
- ;;
- i[3456]86-*-*)
- host_makefile_frag="${host_makefile_frag} config/mh-x86pic"
- ;;
- i370-*-*)
- host_makefile_frag="${host_makefile_frag} config/mh-i370pic"
- ;;
- ia64-*-*)
- host_makefile_frag="${host_makefile_frag} config/mh-ia64pic"
- ;;
- sparc64-*-*)
- host_makefile_frag="${host_makefile_frag} config/mh-sparcpic"
- ;;
- powerpc*-*-aix*)
- # We don't want -fPIC on AIX.
- ;;
- powerpc*-*-*)
- host_makefile_frag="${host_makefile_frag} config/mh-ppcpic"
- ;;
- s390-* | s390x-*)
- host_makefile_frag="${host_makefile_frag} config/mh-s390pic"
- ;;
- *-*-*)
- if test -f ${srcdir}/config/mh-${host_cpu}pic; then
- host_makefile_frag="${host_makefile_frag} config/mh-${host_cpu}pic"
- fi
- ;;
- esac
-fi
-
rm -f mh-frag
if [ -n "${host_makefile_frag}" ] ; then
for f in ${host_makefile_frag}
yes | "") # the default value for this tree is that X11 is available
;;
no)
- skipdirs="${skipdirs} tk libgui gash"
+ skipdirs="${skipdirs} tk libgui"
;;
*)
echo "*** bad value \"${with_x}\" for -with-x flag; ignored" 1>&2
;;
*-*-rtems*)
noconfigdirs="$noconfigdirs target-libgloss ${libgcj}"
+ case ${target} in
+ h8300*-*-* | h8500-*-*)
+ noconfigdirs="$noconfigdirs target-libf2c"
+ ;;
+ *) ;;
+ esac
;;
*-*-vxworks*)
noconfigdirs="$noconfigdirs target-newlib target-libgloss ${libgcj}"
i[34567]86-*-freebsd*)
noconfigdirs="$noconfigdirs target-newlib target-libgloss"
;;
+ s390*-*-linux*)
+ # The libffi port is not yet in the GCC tree
+ noconfigdirs="$noconfigdirs target-newlib target-libgloss ${libgcj}"
+ # linux has rx in libc
+ skipdirs="$skipdirs target-librx"
+ ;;
*-*-linux*)
noconfigdirs="$noconfigdirs target-newlib target-libgloss"
# linux has rx in libc
if [ x${is_cross_compiler} != xno ] ; then
target_configdirs="${target_configdirs} target-libstub target-cygmon"
fi
+ noconfigdirs="$noconfigdirs ${libgcj}"
;;
sparc64-*-elf*)
if [ x${is_cross_compiler} != xno ] ; then
target_configdirs="${target_configdirs} target-libstub target-cygmon"
fi
+ noconfigdirs="$noconfigdirs ${libgcj}"
;;
sparclite-*-*)
if [ x${is_cross_compiler} != xno ] ; then
fi
;;
sparc-*-solaris*)
- case "${host}" in
- sparc-*-solaris2.8)
- # According to Gerald Pfeifer <pfeifer@dbai.tuwien.ac.at>, libjava
- # won't build correctly on Solaris 8 if there's a
- # previously-installed version of GCC in the configured prefix.
- # This problem does not show up on earlier versions of Solaris.
- noconfigdirs="$noconfigdirs ${libgcj}"
- ;;
- esac
;;
v810-*-*)
noconfigdirs="$noconfigdirs bfd binutils gas gcc gdb ld ${libstdcxx_version} opcodes target-libgloss ${libgcj}"
withoptions="$withoptions --with-newlib"
fi
-if [ x${shared} = xyes ]; then
- case "${target}" in
- hppa* | parisc*)
- target_makefile_frag="${target_makefile_frag} config/mt-papic"
- ;;
- i[3456]86-*)
- target_makefile_frag="${target_makefile_frag} config/mt-x86pic"
- ;;
- ia64-*)
- target_makefile_frag="${target_makefile_frag} config/mt-ia64pic"
- ;;
- powerpc*-*-aix*)
- # We don't want -fPIC on AIX.
- ;;
- powerpc*-*)
- target_makefile_frag="${target_makefile_frag} config/mt-ppcpic"
- ;;
- alpha*-*-linux*)
- target_makefile_frag="${target_makefile_frag} config/mt-elfalphapic"
- ;;
- *)
- if test -f ${srcdir}/config/mt-${target_cpu}pic; then
- target_makefile_frag="${target_makefile_frag} config/mt-${target_cpu}pic"
- fi
- ;;
- esac
-fi
-
rm -f mt-frag
if [ -n "${target_makefile_frag}" ] ; then
for f in ${target_makefile_frag}
;;
esac
+# If we're building libgcj and we're using the Solaris 2.8 linker,
+# then we check for a known problem.
+if test "x${libgcj}" = x && test "${with_gnu_ld}" != yes \
+ && test "${is_cross_compiler}" = no; then
+
+ case "${host}" in
+ sparc-*-solaris2.8)
+ if test "$libdir" = '${exec_prefix}/lib';then
+ if test "$exec_prefix" = '$(prefix)'; then
+ tlibdir="$prefix/lib"
+ else
+ tlibdir="$exec_prefix/lib"
+ fi
+ else
+ tlibdir="$libdir"
+ fi
+ if test -f $tlibdir/libgcj.la; then
+ echo "*** You've already installed libgcj in $tlibdir." 1>&2
+ echo " This causes problems when rebuilding libgcj with the Solaris 2.8 linker." 1>&2
+ echo " Either disable the libgcj build, or remove the" 1>&2
+ echo " already-installed libgcj files." 1>&2
+ exit 1
+ fi
+ ;;
+ esac
+fi
+
# If --enable-shared was set, we must set LD_LIBRARY_PATH so that the
# binutils tools will find libbfd.so.
if [ "${shared}" = "yes" ]; then
projects / deliverable / binutils-gdb.git / blobdiff