# start-sanitize-ide
host_libs="${host_libs} libide libidetcl"
# end-sanitize-ide
+# start-sanitize-cygnus
+host_libs="${host_libs} flexlm"
+# end-sanitize-cygnus
if [ "${enable_gdbgui}" = "yes" ] ; then
host_libs="${host_libs} libgui"
# these tools are built for the host environment
# Note, the powerpc-eabi build depends on sim occurring before gdb in order to
# know that we are building the simulator.
-host_tools="texinfo byacc flex bison binutils ld gas gcc sim gdb make patch prms send-pr gprof gdbtest tgas etc expect dejagnu ash bash m4 autoconf automake lbtool ispell grep diff rcs cvssrc fileutils shellutils time textutils wdiff find emacs emacs19 uudecode hello tar gzip indent recode release sed utils guile perl apache inet gawk findutils snavigator libtool gettext"
+host_tools="texinfo byacc flex bison binutils ld gas gcc sim gdb make patch prms send-pr gprof gdbtest tgas etc expect dejagnu ash bash m4 autoconf automake libtool ispell grep diff rcs cvssrc fileutils shellutils time textutils wdiff find emacs emacs19 uudecode hello tar gzip indent recode release sed utils guile perl apache inet gawk findutils snavigator libtool gettext"
# start-sanitize-ide
host_tools="${host_tools} ilu vmake jstools"
# end-sanitize-ide
# these libraries are built for the target environment, and are built after
# the host libraries and the host tools (which may be a cross compiler)
#
-target_libs="target-libiberty target-libgloss target-newlib target-libio target-librx target-libstdc++ target-libg++"
-
+target_libs="target-libiberty \
+ target-libgloss \
+ target-newlib \
+ target-libio \
+ target-librx \
+ target-libstdc++ \
+ ${start-sanitize-java}
+ target-libjava \
+ target-boehm-gc \
+ ${end-sanitize-java}
+ target-libg++"
# these tools are built using the target libs, and are intended to run only
# in the target environment
#
# This must be a single line because of the way it is searched by grep in
# the code below.
-native_only="autoconf automake libtool cvssrc emacs emacs19 fileutils find gawk gettext grep gzip hello indent ispell m4 rcs recode sed shellutils tar textutils gash uudecode wdiff gprof target-groff guile perl apache inet time ash bash prms snavigator gnuserv target-gperf libtool"
+native_only="autoconf automake libtool cvssrc emacs emacs19 fileutils find gawk gettext grep gzip hello indent ispell m4 rcs recode sed shellutils tar textutils gash uudecode wdiff gprof target-groff guile perl apache inet time ash bash prms snavigator gnuserv target-gperf"
# directories to be built in a cross environment only
#
-cross_only="target-libgloss target-newlib target-cygmon target-opcodes"
+cross_only="target-libgloss target-newlib target-cygmon target-opcodes target-libstub"
## All tools belong in one of the four categories, and are assigned above
## We assign ${configdirs} this way to remove all embedded newlines. This
# If we aren't going to be using gcc, see if we can extract a definition
# of CC from the fragment.
-if [ -z "${CC}" -a "${build}" = "${host}" ]; then
+if [ -z "${CC}" ] && [ "${build}" = "${host}" ]; then
IFS="${IFS= }"; save_ifs="$IFS"; IFS="${IFS}:"
found=
for dir in $PATH; do
fi
done
IFS="$save_ifs"
- if [ -z "${found}" -a -n "${host_makefile_frag}" -a -f "${srcdir}/${host_makefile_frag}" ]; then
+ if [ -z "${found}" ] && [ -n "${host_makefile_frag}" ] && [ -f "${srcdir}/${host_makefile_frag}" ]; then
xx=`sed -n -e 's/^[ ]*CC[ ]*=[ ]*\(.*\)$/\1/p' < ${srcdir}/${host_makefile_frag}`
if [ -n "${xx}" ] ; then
CC=$xx
# Well, we don't yet, but we will.
if false && [ "${host}" = "${target}" ] && [ x${enable_shared} = x ]; then
case "${target}" in
- alpha-dec-osf*) enable_shared=yes ;;
- alpha-*-linux*) enable_shared=yes ;;
+ alpha*-dec-osf*) enable_shared=yes ;;
+ alpha*-*-linux*) enable_shared=yes ;;
mips-sgi-irix5*) enable_shared=yes ;;
*) enable_shared=no ;;
esac
powerpc*-*)
host_makefile_frag="${host_makefile_frag} config/mh-ppcpic"
;;
- alpha-*-linux*)
+ alpha*-*-linux*)
host_makefile_frag="${host_makefile_frag} config/mh-elfalphapic"
;;
*)
;;
esac
+# If --enable-target-optspace always use -Os instead of -O2 to build
+# the target libraries, similarly if it is not specified, use -Os
+# on selected platforms.
+case "${enable_target_optspace}:${target}" in
+ yes:*)
+ target_makefile_frag="${target_makefile_frag} config/mt-ospace"
+ ;;
+ :m32r-* | :d10v-*)
+ target_makefile_frag="${target_makefile_frag} config/mt-ospace"
+ ;;
+# start-sanitize-d30v
+ :d30v-*-*)
+ target_makefile_frag="${target_makefile_frag} config/mt-ospace"
+ ;;
+# end-sanitize-d30v
+ no:* | :*)
+ ;;
+ *)
+ echo "*** bad value \"${enable_target_optspace}\" for --enable-target-optspace flag; ignored" 1>&2
+ ;;
+esac
+
skipdirs=
gasdir=gas
use_gnu_ld=
# start-sanitize-ide
noconfigdirs="$noconfigdirs libide libidetcl vmake jstools"
# end-sanitize-ide
+# start-sanitize-cygnus
+ noconfigdirs="$noconfigdirs flexlm"
+# end-sanitize-cygnus
;;
i[3456]86-*-go32* | i[3456]86-*-msdosdjgpp*)
noconfigdirs="tcl tk expect dejagnu make texinfo bison patch flex byacc send-pr uudecode dejagnu diff guile perl apache inet itcl tix db snavigator gnuserv gettext"
# start-sanitize-ide
noconfigdirs="$noconfigdirs libide libidetcl vmake jstools"
# end-sanitize-ide
+# start-sanitize-cygnus
+ noconfigdirs="$noconfigdirs flexlm"
+# end-sanitize-cygnus
;;
i[3456]86-*-mingw32*)
# noconfigdirs="tcl tk expect dejagnu make texinfo bison patch flex byacc send-pr uudecode dejagnu diff guile perl apache inet itcl tix db snavigator gnuserv"
# start-sanitize-ide
noconfigdirs="$noconfigdirs libide libidetcl vmake jstools"
# end-sanitize-ide
+# start-sanitize-cygnus
+ noconfigdirs="$noconfigdirs flexlm"
+# end-sanitize-cygnus
;;
esac
*-*-vxworks*)
noconfigdirs="$noconfigdirs target-newlib target-libgloss"
;;
- alpha-dec-osf*)
+ alpha*-dec-osf*)
# ld works, but does not support shared libraries. emacs doesn't
# work. newlib is not 64 bit ready. I'm not sure about fileutils.
# gas doesn't generate exception information.
alpha*-*-*vms*)
noconfigdirs="$noconfigdirs gdb ld target-newlib target-libgloss"
;;
- alpha-*-linux*)
+ alpha*-*-linux*)
# newlib is not 64 bit ready
noconfigdirs="$noconfigdirs target-newlib target-libgloss"
# linux has rx in libc
case "${host}" in
i[3456]86-*-mingw32) ;; # keep gdb tcl tk expect etc.
*) noconfigdirs="$noconfigdirs gdb tcl tk expect itcl tix db snavigator gnuserv"
+# start-sanitize-cygnus
+ noconfigdirs="$noconfigdirs flexlm"
+# end-sanitize-cygnus
;;
esac
;;
# start-sanitize-ide
noconfigdirs="$noconfigdirs libide libidetcl vmake jstools"
# end-sanitize-ide
+# start-sanitize-cygnus
+ noconfigdirs="$noconfigdirs flexlm"
+# end-sanitize-cygnus
;;
esac
;;
# start-sanitize-ide
noconfigdirs="$noconfigdirs libide libidetcl vmake jstools"
# end-sanitize-ide
+# start-sanitize-cygnus
+ noconfigdirs="$noconfigdirs flexlm"
+# end-sanitize-cygnus
# always build newlib.
skipdirs=`echo " ${skipdirs} " | sed -e 's/ target-newlib / /'`
;;
# start-sanitize-ide
noconfigdirs="$noconfigdirs libide libidetcl vmake jstools"
# end-sanitize-ide
+# start-sanitize-cygnus
+ noconfigdirs="$noconfigdirs flexlm"
+# end-sanitize-cygnus
;;
rs6000-*-lynxos*)
# The CVS server code doesn't work on the RS/6000
;;
sparc-*-elf*)
if [ x${is_cross_compiler} != xno ] ; then
- target_configdirs="${target_configdirs} target-cygmon"
+ target_configdirs="${target_configdirs} target-libstub target-cygmon"
fi
;;
sparc64-*-elf*)
if [ x${is_cross_compiler} != xno ] ; then
- target_configdirs="${target_configdirs} target-cygmon"
+ target_configdirs="${target_configdirs} target-libstub target-cygmon"
fi
;;
sparclite-*-aout*)
if [ x${is_cross_compiler} != xno ] ; then
- target_configdirs="${target_configdirs} target-cygmon"
+ target_configdirs="${target_configdirs} target-libstub target-cygmon"
fi
;;
sparc-*-sunos4*)
# Deconfigure all subdirectories, in case we are changing the
# configuration from one where a subdirectory is supported to one where it
# is not.
-if [ -z "${norecursion}" -a -n "${configdirs}" ]; then
+if [ -z "${norecursion}" ] && [ -n "${configdirs}" ]; then
for i in `echo ${configdirs} | sed -e s/target-//g` ; do
rm -f $i/Makefile
done
fi
-if [ -z "${norecursion}" -a -n "${target_configdirs}" ]; then
+if [ -z "${norecursion}" ] && [ -n "${target_configdirs}" ]; then
for i in `echo ${target_configdirs} | sed -e s/target-//g` ; do
rm -f ${target_subdir}/$i/Makefile
done
powerpc*-*)
target_makefile_frag="${target_makefile_frag} config/mt-ppcpic"
;;
- alpha-*-linux*)
+ alpha*-*-linux*)
target_makefile_frag="${target_makefile_frag} config/mt-elfalphapic"
;;
*)
targargs="--enable-multilib ${targargs}"
fi
+# Pass --with-newlib if appropriate. Note that target_configdirs has
+# changed from the earlier setting of with_newlib.
+if [ x${with_newlib} != xno ] && echo " ${target_configdirs} " | grep " newlib " > /dev/null 2>&1 && [ -d ${srcdir}/newlib ] ; then
+ targargs="--with-newlib ${targargs}"
+fi
+
targargs="--host=${target_alias} --build=${build_alias} ${targargs}"
sed -e "s:^TARGET_CONFIGDIRS[ ]*=.*$:TARGET_CONFIGDIRS = ${target_configdirs}:" \
-e "s%^CONFIG_ARGUMENTS[ ]*=.*$%CONFIG_ARGUMENTS = ${targargs}%" \
projects / deliverable / binutils-gdb.git / blobdiff