-# Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998,
-# 1999, 2000, 2001, 2002, 2003, 2004 Free Software Foundation, Inc.
+# Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999,
+# 2000, 2001, 2002, 2003, 2004, 2005, 2006 Free Software Foundation, Inc.
#
# This file is free software; you can redistribute it and/or modify it
# under the terms of the GNU General Public License as published by
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
##############################################################################
### WARNING: this file contains embedded tabs. Do not run untabify on this file.
# these libraries are used by various programs built for the host environment
#
-host_libs="intl mmalloc libiberty opcodes bfd readline tcl tk itcl libgui zlib libcpp"
+host_libs="intl mmalloc libiberty opcodes bfd readline tcl tk itcl libgui zlib libcpp libdecnumber"
# these tools are built for the host environment
# Note, the powerpc-eabi build depends on sim occurring before gdb in order to
# libgcj represents the runtime libraries only used by gcj.
libgcj="target-libffi \
- target-boehm-gc \
target-zlib \
target-qthreads \
target-libjava"
target-newlib \
target-libstdc++-v3 \
target-libmudflap \
+ target-libssp \
target-libgfortran \
+ target-boehm-gc \
${libgcj} \
target-libobjc \
- target-libada"
+ target-libada \
+ target-libgomp"
# these tools are built using the target libraries, and are intended to
# run only in the target environment
# Some tools are only suitable for building in a "native" situation.
# Remove these if host!=target.
-native_only="autoconf automake libtool fileutils find gawk gettext gzip hello indent m4 rcs recode sed shellutils tar textutils uudecode wdiff gprof target-groff guile perl time ash bash bzip2 prms gnuserv target-gperf"
+native_only="autoconf automake libtool fileutils find gawk gettext gzip hello indent m4 rcs recode sed shellutils tar textutils uudecode wdiff target-groff guile perl time ash bash bzip2 prms gnuserv target-gperf"
# Similarly, some are only suitable for cross toolchains.
# Remove these if host=target.
;;
i[[3456789]]86-*-mingw32*)
# noconfigdirs="tcl tk expect dejagnu make texinfo bison patch flex byacc send-pr uudecode dejagnu diff guile perl itcl gnuserv"
- noconfigdirs="$noconfigdirs expect dejagnu autoconf automake send-pr rcs guile perl texinfo libtool"
+ noconfigdirs="$noconfigdirs expect dejagnu autoconf automake send-pr rcs guile perl texinfo libtool newlib"
;;
i[[3456789]]86-*-beos*)
noconfigdirs="$noconfigdirs tk itcl libgui gdb"
ENABLE_LIBADA=$enableval,
ENABLE_LIBADA=yes)
if test "${ENABLE_LIBADA}" != "yes" ; then
- noconfigdirs="$noconfigdirs target-libada"
noconfigdirs="$noconfigdirs gnattools"
fi
+AC_ARG_ENABLE(libssp,
+[ --enable-libssp Builds libssp directory],
+ENABLE_LIBSSP=$enableval,
+ENABLE_LIBSSP=yes)
+
# Save it here so that, even in case of --enable-libgcj, if the Java
# front-end isn't enabled, we still get libgcj disabled.
libgcj_saved=$libgcj
esac
-# Allow --disable-libmudflap to exclude target-libmudflap
-case $enable_libmudflap in
-yes)
- ;;
-no)
- noconfigdirs="$noconfigdirs target-libmudflap"
- ;;
-"")
+# Disable libmudflap on some systems.
+if test x$enable_libmudflap = x ; then
case "${target}" in
- *-*-linux*-gnu | *-*-gnu* | *-*-k*bsd*-gnu)
+ *-*-linux* | *-*-gnu* | *-*-k*bsd*-gnu)
# Enable libmudflap by default in GNU and friends.
;;
*-*-freebsd*)
noconfigdirs="$noconfigdirs target-libmudflap"
;;
esac
-esac
+fi
+
+# Disable libgomp on non POSIX hosted systems.
+if test x$enable_libgomp = x ; then
+ # Enable libgomp by default on hosted POSIX systems.
+ case "${target}" in
+ *-*-linux* | *-*-gnu* | *-*-k*bsd*-gnu)
+ ;;
+ *-*-netbsd* | *-*-freebsd* | *-*-openbsd*)
+ ;;
+ *-*-solaris2* | *-*-sysv4* | *-*-irix6* | *-*-osf* | *-*-hpux11*)
+ ;;
+ *-*-darwin* | *-*-aix*)
+ ;;
+ *)
+ noconfigdirs="$noconfigdirs target-libgomp"
+ ;;
+ esac
+fi
case "${target}" in
*-*-chorusos)
noconfigdirs="$noconfigdirs target-newlib target-libgloss ${libgcj}"
;;
- powerpc-*-darwin*)
+ powerpc-*-darwin* | i[[3456789]]86-*-darwin*)
noconfigdirs="$noconfigdirs bfd binutils ld gas opcodes gdb gprof"
noconfigdirs="$noconfigdirs sim target-rda"
;;
*-*-darwin*)
- noconfigdirs="$noconfigdirs bfd binutils ld gas opcodes gdb gprof"
+ noconfigdirs="$noconfigdirs ld gas gdb gprof"
noconfigdirs="$noconfigdirs sim target-rda"
noconfigdirs="$noconfigdirs ${libgcj}"
;;
*-*-rtems*)
noconfigdirs="$noconfigdirs target-libgloss ${libgcj}"
;;
+ # The tpf target doesn't support gdb yet.
+ *-*-tpf*)
+ noconfigdirs="$noconfigdirs target-newlib target-libgloss target-libiberty ${libgcj} target-libmudflap gdb tcl tk libgui itcl"
+ ;;
*-*-uclinux*)
noconfigdirs="$noconfigdirs target-newlib target-libgloss target-rda ${libgcj}"
;;
*-*-vxworks*)
- noconfigdirs="$noconfigdirs target-newlib target-libgloss target-libiberty ${libgcj}"
+ noconfigdirs="$noconfigdirs target-newlib target-libgloss target-libiberty target-libstdc++-v3 ${libgcj}"
;;
alpha*-dec-osf*)
# ld works, but does not support shared libraries.
arm-*-elf* | strongarm-*-elf* | xscale-*-elf* | arm*-*-eabi* )
noconfigdirs="$noconfigdirs target-libffi target-qthreads"
;;
+ arm*-*-linux-gnueabi)
+ noconfigdirs="$noconfigdirs target-libffi target-qthreads"
+ noconfigdirs="$noconfigdirs target-libjava target-libobjc"
+ ;;
arm*-*-symbianelf*)
noconfigdirs="$noconfigdirs ${libgcj} target-libiberty"
;;
avr-*-*)
noconfigdirs="$noconfigdirs target-libiberty target-libstdc++-v3 ${libgcj}"
;;
+ bfin-*-*)
+ noconfigdirs="$noconfigdirs gdb"
+ if test x${is_cross_compiler} != xno ; then
+ target_configdirs="${target_configdirs} target-bsp target-cygmon"
+ fi
+ ;;
c4x-*-* | tic4x-*-*)
noconfigdirs="$noconfigdirs target-libstdc++-v3 target-libgloss ${libgcj}"
;;
unsupported_languages="$unsupported_languages java"
case "${target}" in
*-*-aout)
- unsupported_languages="$unsupported_languages f95"
+ unsupported_languages="$unsupported_languages fortran"
noconfigdirs="$noconfigdirs target-libffi target-boehm-gc";;
*-*-elf)
- unsupported_languages="$unsupported_languages f95"
+ unsupported_languages="$unsupported_languages fortran"
noconfigdirs="$noconfigdirs target-boehm-gc";;
*-*-linux*)
noconfigdirs="$noconfigdirs target-newlib target-libgloss";;
*)
- unsupported_languages="$unsupported_languages f95"
+ unsupported_languages="$unsupported_languages fortran"
noconfigdirs="$noconfigdirs ${libgcj} target-newlib target-libgloss";;
esac
;;
hppa*64*-*-*)
noconfigdirs="$noconfigdirs ${libgcj}"
;;
+ hppa*-hp-hpux11*)
+ noconfigdirs="$noconfigdirs ld shellutils"
+ ;;
hppa*-*-*)
# According to Alexandre Oliva <aoliva@redhat.com>, libjava won't
# build on HP-UX 10.20.
# 'target-newlib' will appear in skipdirs.
;;
i[[3456789]]86-*-mingw32*)
- target_configdirs="$target_configdirs target-mingw"
- noconfigdirs="$noconfigdirs expect target-libgloss ${libgcj}"
-
- # Can't build gdb for mingw32 if not native.
- case "${host}" in
- i[[3456789]]86-*-mingw32) ;; # keep gdb tcl tk expect etc.
- *) noconfigdirs="$noconfigdirs gdb tcl tk expect itcl gnuserv"
- ;;
- esac
+ target_configdirs="$target_configdirs target-winsup"
+ noconfigdirs="$noconfigdirs expect target-libgloss target-newlib ${libgcj}"
;;
*-*-cygwin*)
target_configdirs="$target_configdirs target-libtermcap target-winsup"
noconfigdirs="$noconfigdirs target-gperf target-libgloss ${libgcj}"
# always build newlib if winsup directory is present.
- if test -d "$srcdir/winsup"; then
+ if test -d "$srcdir/winsup/cygwin"; then
skipdirs=`echo " ${skipdirs} " | sed -e 's/ target-newlib / /'`
elif test -d "$srcdir/newlib"; then
- echo "Warning: winsup is missing so newlib can't be built."
+ echo "Warning: winsup/cygwin is missing so newlib can't be built."
fi
-
- # Can't build gdb for Cygwin if not native.
- case "${host}" in
- *-*-cygwin*) ;; # keep gdb tcl tk expect etc.
- *) noconfigdirs="$noconfigdirs gdb tcl tk expect itcl libgui gnuserv"
- ;;
- esac
;;
i[[3456789]]86-moss-msdos | i[[3456789]]86-*-moss* | \
i[[3456789]]86-*-uwin* | i[[3456789]]86-*-interix* )
i[[3456789]]86-*-beos*)
noconfigdirs="$noconfigdirs gdb target-newlib target-libgloss ${libgcj}"
;;
+ i[[3456789]]86-*-rdos*)
+ noconfigdirs="$noconfigdirs gdb target-newlib target-libgloss"
+ ;;
m32r-*-*)
noconfigdirs="$noconfigdirs ${libgcj}"
;;
;;
mmix-*-*)
noconfigdirs="$noconfigdirs target-libffi target-boehm-gc gdb libgloss"
- unsupported_languages="$unsupported_languages f95 java"
+ unsupported_languages="$unsupported_languages fortran java"
;;
mn10200-*-*)
noconfigdirs="$noconfigdirs ${libgcj}"
mn10300-*-*)
noconfigdirs="$noconfigdirs ${libgcj}"
;;
- ms1-*-*)
+ mt-*-*)
noconfigdirs="$noconfigdirs sim"
;;
powerpc-*-aix*)
# copied from rs6000-*-* entry
- noconfigdirs="$noconfigdirs gprof target-libgloss ${libgcj}"
+ noconfigdirs="$noconfigdirs gprof target-libgloss target-libssp ${libgcj}"
;;
powerpc*-*-winnt* | powerpc*-*-pe* | ppc*-*-pe)
target_configdirs="$target_configdirs target-winsup"
noconfigdirs="$noconfigdirs target-newlib gprof ${libgcj}"
;;
rs6000-*-aix*)
- noconfigdirs="$noconfigdirs gprof target-libgloss ${libgcj}"
+ noconfigdirs="$noconfigdirs gprof target-libgloss target-libssp ${libgcj}"
;;
rs6000-*-*)
noconfigdirs="$noconfigdirs gprof ${libgcj}"
# <oldham@codesourcery.com>
noconfigdirs="$noconfigdirs gprof target-libgloss ${libgcj}"
;;
- mips*-dec-bsd*)
- noconfigdirs="$noconfigdirs gprof target-libgloss ${libgcj}"
- ;;
mips*-*-bsd*)
noconfigdirs="$noconfigdirs gprof target-libgloss ${libgcj}"
;;
- mipstx39-*-*)
- noconfigdirs="$noconfigdirs gprof ${libgcj}" # same as generic mips
- ;;
mips64*-*-linux*)
- noconfigdirs="$noconfigdirs target-newlib ${libgcj}"
+ noconfigdirs="$noconfigdirs target-newlib target-libgloss ${libgcj}"
;;
mips*-*-linux*)
noconfigdirs="$noconfigdirs target-newlib target-libgloss"
;;
sparc-*-solaris* | sparc64-*-solaris* | sparcv9-*-solaris*)
;;
+ spu-*-*)
+ skipdirs="target-libssp"
+ ;;
v810-*-*)
noconfigdirs="$noconfigdirs bfd binutils gas gcc gdb ld target-libstdc++-v3 opcodes target-libgloss ${libgcj}"
;;
powerpc-*-darwin*)
host_makefile_frag="config/mh-ppc-darwin"
;;
+ powerpc-*-aix*)
+ host_makefile_frag="config/mh-ppc-aix"
+ ;;
+ rs6000-*-aix*)
+ host_makefile_frag="config/mh-ppc-aix"
+ ;;
*-*-lynxos*)
# /bin/cc is less than useful for our purposes. Always use GCC
tentative_cc="/bin/gcc"
CXX=${CXX-${host_alias}-c++}
CXXFLAGS=${CXXFLAGS-"-g -O2"}
CC_FOR_BUILD=${CC_FOR_BUILD-gcc}
- CC_FOR_TARGET=${CC_FOR_TARGET-${target_alias}-gcc}
- CXX_FOR_TARGET=${CXX_FOR_TARGET-${target_alias}-c++}
- GCJ_FOR_TARGET=${GCJ_FOR_TARGET-${target_alias}-gcj}
- GCC_FOR_TARGET=${GCC_FOR_TARGET-${CC_FOR_TARGET-${target_alias}-gcc}}
- BUILD_PREFIX=${build_alias}-
- BUILD_PREFIX_1=${build_alias}-
else
# Set reasonable default values for some tools even if not Canadian.
# This is all going to change when we autoconfiscate...
CC_FOR_BUILD="\$(CC)"
- GCC_FOR_TARGET="\$(USUAL_GCC_FOR_TARGET)"
- BUILD_PREFIX=
- BUILD_PREFIX_1=loser-
-
AC_PROG_CC
# We must set the default linker to the linker used by gcc for the correct
ACX_PROG_CMP_IGNORE_INITIAL
# Check for GMP and MPFR
-gmplibs=
+gmplibs="-lmpfr"
gmpinc=
have_gmp=yes
# Specify a location for mpfr
# check for this first so it ends up on the link line before gmp.
-AC_ARG_WITH(mpfr-dir, [ --with-mpfr-dir=PATH Specify source directory for MPFR library])
+AC_ARG_WITH(mpfr-dir, [ --with-mpfr-dir=PATH This option has been REMOVED],
+ AC_MSG_ERROR([The --with-mpfr-dir=PATH option has been removed.
+Use --with-mpfr=PATH or --with-mpfr-include=PATH plus --with-mpfr-lib=PATH]))
-if test "x$with_mpfr_dir" != x; then
- gmpinc="-I$with_mpfr_dir"
- gmplibs="$with_mpfr_dir/libmpfr.a"
-else
- gmplibs="-lmpfr"
-fi
-
-AC_ARG_WITH(mpfr, [ --with-mpfr=PATH Specify directory for installed MPFR library])
+AC_ARG_WITH(mpfr, [ --with-mpfr=PATH Specify prefix directory for installed MPFR package
+ Equivalent to --with-mpfr-include=PATH/include
+ plus --with-mpfr-lib=PATH/lib])
+AC_ARG_WITH(mpfr_include, [ --with-mpfr-include=PATH
+ Specify directory for installed MPFR include files])
+AC_ARG_WITH(mpfr_lib, [ --with-mpfr-lib=PATH Specify the directory for the installed MPFR library])
if test "x$with_mpfr" != x; then
gmplibs="-L$with_mpfr/lib $gmplibs"
gmpinc="-I$with_mpfr/include"
fi
+if test "x$with_mpfr_include" != x; then
+ gmpinc="-I$with_mpfr_include"
+fi
+if test "x$with_mpfr_lib" != x; then
+ gmplibs="-L$with_mpfr_lib $gmplibs"
+fi
# Specify a location for gmp
-AC_ARG_WITH(gmp-dir, [ --with-gmp-dir=PATH Specify source directory for GMP library])
-
-if test "x$with_gmp_dir" != x; then
- gmpinc="$gmpinc -I$with_gmp_dir"
- if test -f "$with_gmp_dir/.libs/libgmp.a"; then
- gmplibs="$gmplibs $with_gmp_dir/.libs/libgmp.a"
- elif test -f "$with_gmp_dir/_libs/libgmp.a"; then
- gmplibs="$gmplibs $with_gmp_dir/_libs/libgmp.a"
- fi
- # One of the later tests will catch the error if neither library is present.
-else
- gmplibs="$gmplibs -lgmp"
-fi
+AC_ARG_WITH(gmp-dir, [ --with-gmp-dir=PATH This option has been REMOVED],
+ AC_MSG_ERROR([The --with-gmp-dir=PATH option has been removed.
+Use --with-gmp=PATH or --with-gmp-include=PATH plus --with-gmp-lib=PATH]))
+
+gmplibs="$gmplibs -lgmp"
+
+AC_ARG_WITH(gmp, [ --with-gmp=PATH Specify prefix directory for the installed GMP package
+ Equivalent to --with-gmp-include=PATH/include
+ plus --with-gmp-lib=PATH/lib])
+AC_ARG_WITH(gmp_include, [ --with-gmp-include=PATH Specify directory for installed GMP include files])
+AC_ARG_WITH(gmp_lib, [ --with-gmp-lib=PATH Specify the directory for the installed GMP library])
-AC_ARG_WITH(gmp, [ --with-gmp=PATH Specify directory for installed GMP library])
if test "x$with_gmp" != x; then
gmplibs="-L$with_gmp/lib $gmplibs"
gmpinc="-I$with_gmp/include $gmpinc"
fi
+if test "x$with_gmp_include" != x; then
+ gmpinc="-I$with_gmp_include $gmpinc"
+fi
+if test "x$with_gmp_lib" != x; then
+ gmplibs="-L$with_gmp_lib $gmplibs"
+fi
saved_CFLAGS="$CFLAGS"
CFLAGS="$CFLAGS $gmpinc"
# Check GMP actually works
AC_MSG_CHECKING([for correct version of gmp.h])
AC_TRY_COMPILE([#include "gmp.h"],[
-#if __GNU_MP_VERSION < 3
+#if __GNU_MP_VERSION < 4 || (__GNU_MP_VERSION == 4 && __GNU_MP_VERSION_MINOR < 1)
choke me
#endif
-], [AC_MSG_RESULT([yes])],
- [AC_MSG_RESULT([no]); have_gmp=no])
+], [AC_MSG_RESULT([yes])], [AC_MSG_RESULT([no]); have_gmp=no])
if test x"$have_gmp" = xyes; then
- AC_MSG_CHECKING([for MPFR])
-
saved_LIBS="$LIBS"
LIBS="$LIBS $gmplibs"
+ dnl MPFR 2.2.0 is acceptable but buggy, MPFR 2.2.1 is better.
+ AC_MSG_CHECKING([for correct version of mpfr.h])
AC_TRY_LINK([#include <gmp.h>
-#include <mpfr.h>], [mpfr_t n; mpfr_init(n);],
- [AC_MSG_RESULT([yes])], [AC_MSG_RESULT([no]); have_gmp=no])
+#include <mpfr.h>],[
+#if MPFR_VERSION < MPFR_VERSION_NUM(2,2,0)
+ choke me
+#endif
+ mpfr_t n; mpfr_init(n);
+], [AC_TRY_LINK([#include <gmp.h>
+#include <mpfr.h>],[
+#if MPFR_VERSION < MPFR_VERSION_NUM(2,2,1)
+ choke me
+#endif
+ mpfr_t n; mpfr_init(n);
+], [AC_MSG_RESULT([yes])], [AC_MSG_RESULT([buggy but acceptable])])],
+ [AC_MSG_RESULT([no]); have_gmp=no])
LIBS="$saved_LIBS"
- CFLAGS="$saved_CFLAGS"
+fi
+CFLAGS="$saved_CFLAGS"
+
+if test -d ${srcdir}/gcc && test x$have_gmp != xyes; then
+ AC_MSG_ERROR([Building GCC requires GMP 4.1+ and MPFR 2.2.1+.
+Try the --with-gmp and/or --with-mpfr options to specify their locations.
+Copies of these libraries' source code can be found at their respective
+hosting sites as well as at ftp://gcc.gnu.org/pub/gcc/infrastructure/.
+See also http://gcc.gnu.org/install/prerequisites.html for additional info.
+If you obtained GMP and/or MPFR from a vendor distribution package, make
+sure that you have installed both the libraries and the header files.
+They may be located in separate packages.])
fi
# Flags needed for both GMP and/or MPFR
AC_SUBST(gmpinc)
# By default, C is the only stage 1 language.
-stage1_languages=c
-AC_SUBST(stage1_languages)
+stage1_languages=,c,
# Figure out what language subdirectories are present.
# Look if the user specified --enable-languages="..."; if not, use
fi
enable_languages=`echo "${enable_languages}" | sed -e 's/[[ ,]][[ ,]]*/,/g' -e 's/,$//'`
+ # 'f95' is the old name for the 'fortran' language. We issue a warning
+ # and make the substitution.
+ case ,${enable_languages}, in
+ *,f95,*)
+ echo configure.in: warning: 'f95' as language name is deprecated, use 'fortran' instead 1>&2
+ enable_languages=`echo "${enable_languages}" | sed -e 's/f95/fortran/g'`
+ ;;
+ esac
+
# First scan to see if an enabled language requires some other language.
# We assume that a given config-lang.in will list all the language
# front ends it requires, even if some are required indirectly.
esac
done
- new_enable_languages=c
+ new_enable_languages=,c,
missing_languages=`echo ",$enable_languages," | sed -e s/,all,/,/ -e s/,c,/,/ `
- potential_languages=c
+ potential_languages=,c,
for lang_frag in ${srcdir}/gcc/*/config-lang.in .. ; do
case ${lang_frag} in
language=
target_libs=
lang_dirs=
- boot_language=
- build_by_default=
- need_gmp=
+ subdir_requires=
+ boot_language=no
+ build_by_default=yes
. ${lang_frag}
- potential_languages="${potential_languages},${language}"
- # This is quite sensitive to the ordering of the case statement arms.
- case ,${enable_languages},:${language}:${have_gnat}:${build_by_default} in
- *::*:*)
- echo "${lang_frag} doesn't set \$language." 1>&2
- exit 1
- ;;
- *:ada:no:*)
- # Ada was requested with no preexisting GNAT. Disable unconditionally.
- add_this_lang=no
- ;;
- *,${language},*:*:*:*)
+ if test x${language} = x; then
+ echo "${lang_frag} doesn't set \$language." 1>&2
+ exit 1
+ fi
+
+ case ,${enable_languages}, in
+ *,${language},*)
# Language was explicitly selected; include it.
add_this_lang=yes
;;
- *,all,*:*:*:no)
- # 'all' was selected, but this is not a default language
- # so do not include it.
- add_this_lang=no
- ;;
- *,all,*:*:*:*)
- # 'all' was selected and this is a default language; include it.
- add_this_lang=yes
+ *,all,*)
+ # 'all' was selected, select it if it is a default language
+ add_this_lang=${build_by_default}
;;
*)
add_this_lang=no
;;
esac
- # Disable languages that need GMP if it isn't available.
- case ,${enable_languages},:${have_gmp}:${need_gmp} in
- *,${language},*:no:yes)
+ # Disable languages that need other directories if these aren't available.
+ for i in $subdir_requires; do
+ test -f "$srcdir/gcc/$i/config-lang.in" && continue
+ case ,${enable_languages}, in
+ *,${language},*)
+ # Specifically requested language; tell them.
+ AC_MSG_ERROR([The gcc/$i directory contains parts of $language but is missing])
+ ;;
+ *)
+ # Silently disable.
+ add_this_lang=unsupported
+ ;;
+ esac
+ done
+
+ # Disable Ada if no preexisting GNAT is available.
+ case ,${enable_languages},:${language}:${have_gnat} in
+ *,${language},*:ada:no)
# Specifically requested language; tell them.
- AC_MSG_ERROR([GMP with MPFR support is required to build $language])
+ AC_MSG_ERROR([GNAT is required to build $language])
;;
- *:no:yes)
+ *:ada:no)
# Silently disable.
- add_this_lang=no
+ add_this_lang=unsupported
;;
esac
# Disable a language that is unsupported by the target.
case " $unsupported_languages " in
*" $language "*)
- add_this_lang=no
+ add_this_lang=unsupported
;;
esac
case $add_this_lang in
- no)
+ unsupported)
# Remove language-dependent dirs.
eval noconfigdirs='"$noconfigdirs "'\"$target_libs $lang_dirs\"
;;
- *)
- new_enable_languages="$new_enable_languages,$language"
+ no)
+ # Remove language-dependent dirs; still show language as supported.
+ eval noconfigdirs='"$noconfigdirs "'\"$target_libs $lang_dirs\"
+ potential_languages="${potential_languages}${language},"
+ ;;
+ yes)
+ new_enable_languages="${new_enable_languages}${language},"
+ potential_languages="${potential_languages}${language},"
missing_languages=`echo "$missing_languages" | sed "s/,$language,/,/"`
case ${boot_language} in
yes)
# Add to (comma-separated) list of stage 1 languages.
- stage1_languages="${stage1_languages},${language}"
+ stage1_languages="${stage1_languages}${language},"
;;
esac
;;
esac
done
+ AC_ARG_ENABLE(stage1-languages,
+[ --enable-stage1-languages[=all] choose additional languages to build during
+ stage1. Mostly useful for compiler development.],
+ [case ,${enable_stage1_languages}, in
+ ,no,|,,)
+ # Set it to something that will have no effect in the loop below
+ enable_stage1_languages=c ;;
+ ,yes,)
+ enable_stage1_languages=`echo $new_enable_languages | \
+ sed -e "s/^,//" -e "s/,$//" ` ;;
+ *,all,*)
+ enable_stage1_languages=`echo ,$enable_stage1_languages, | \
+ sed -e "s/,all,/$new_enable_languages/" -e "s/^,//" -e "s/,$//" ` ;;
+ esac
+
+ # Add "good" languages from enable_stage1_languages to stage1_languages,
+ # while "bad" languages go in missing_languages. Leave no duplicates.
+ for i in `echo $enable_stage1_languages | sed 's/,/ /g' `; do
+ case $potential_languages in
+ *,$i,*)
+ case $stage1_languages in
+ *,$i,*) ;;
+ *) stage1_languages="$stage1_languages$i," ;;
+ esac ;;
+ *)
+ case $missing_languages in
+ *,$i,*) ;;
+ *) missing_languages="$missing_languages$i," ;;
+ esac ;;
+ esac
+ done])
+
+ # Remove leading/trailing commas that were added for simplicity
+ potential_languages=`echo "$potential_languages" | sed -e "s/^,//" -e "s/,$//"`
missing_languages=`echo "$missing_languages" | sed -e "s/^,//" -e "s/,$//"`
+ stage1_languages=`echo "$stage1_languages" | sed -e "s/^,//" -e "s/,$//"`
+ new_enable_languages=`echo "$new_enable_languages" | sed -e "s/^,//" -e "s/,$//"`
+
if test "x$missing_languages" != x; then
AC_MSG_ERROR([
The following requested languages could not be built: ${missing_languages}
-Recognised languages are: ${potential_languages}])
+Supported languages are: ${potential_languages}])
fi
-
if test "x$new_enable_languages" != "x$enable_languages"; then
echo The following languages will be built: ${new_enable_languages}
+ enable_languages="$new_enable_languages"
fi
- enable_languages="$new_enable_languages"
+
+ AC_SUBST(stage1_languages)
ac_configure_args=`echo " $ac_configure_args" | sed -e 's/ --enable-languages=[[^ ]]*//' -e 's/$/ --enable-languages='"$enable_languages"/ `
fi
+# Handle --disable-<component> generically.
+for dir in $configdirs $build_configdirs $target_configdirs ; do
+ dirname=`echo $dir | sed -e s/target-//g -e s/build-//g -e s/-/_/g`
+ if eval test x\${enable_${dirname}} "=" xno ; then
+ noconfigdirs="$noconfigdirs $dir"
+ fi
+done
+
+# Check for Boehm's garbage collector
+AC_ARG_ENABLE(objc-gc,
+[ --enable-objc-gc enable the use of Boehm's garbage collector with
+ the GNU Objective-C runtime.],
+[case ,${enable_languages},:${enable_objc_gc}:${noconfigdirs} in
+ *,objc,*:*:yes:*target-boehm-gc*)
+ AC_MSG_ERROR([Boehm's garbage collector was requested yet not supported in this configuration])
+ ;;
+esac])
+
+# Make sure we only build Boehm's garbage collector if required.
+case ,${enable_languages},:${enable_objc_gc} in
+ *,objc,*:yes)
+ # Keep target-boehm-gc if requested for Objective-C.
+ ;;
+ *)
+ # Otherwise remove target-boehm-gc depending on target-libjava.
+ if echo " ${noconfigdirs} " | grep "target-libjava" >/dev/null 2>&1; then
+ noconfigdirs="$noconfigdirs target-boehm-gc"
+ fi
+ ;;
+esac
+
# Remove the entries in $skipdirs and $noconfigdirs from $configdirs,
# $build_configdirs and $target_configdirs.
# If we have the source for $noconfigdirs entries, add them to $notsupp.
copy_dirs=
+AC_ARG_WITH([build-sysroot],
+ [ --with-build-sysroot=sysroot
+ use sysroot as the system root during the build],
+ [if test x"$withval" != x ; then
+ SYSROOT_CFLAGS_FOR_TARGET="--sysroot=$withval"
+ fi],
+ [SYSROOT_CFLAGS_FOR_TARGET=])
+AC_SUBST(SYSROOT_CFLAGS_FOR_TARGET)
+
# Handle --with-headers=XXX. If the value is not "yes", the contents of
# the named directory are copied to $(tooldir)/sys-include.
if test x"${with_headers}" != x && test x"${with_headers}" != xno ; then
fi
fi
+# Set with_gnu_as and with_gnu_ld as appropriate.
+#
+# This is done by determining whether or not the appropriate directory
+# is available, and by checking whether or not specific configurations
+# have requested that this magic not happen.
+#
+# The command line options always override the explicit settings in
+# configure.in, and the settings in configure.in override this magic.
+#
+# If the default for a toolchain is to use GNU as and ld, and you don't
+# want to do that, then you should use the --without-gnu-as and
+# --without-gnu-ld options for the configure script.
+
+if test x${use_gnu_as} = x &&
+ echo " ${configdirs} " | grep " gas " > /dev/null 2>&1 ; then
+ with_gnu_as=yes
+ extra_host_args="$extra_host_args --with-gnu-as"
+fi
+
+if test x${use_gnu_ld} = x &&
+ echo " ${configdirs} " | grep " ld " > /dev/null 2>&1 ; then
+ with_gnu_ld=yes
+ extra_host_args="$extra_host_args --with-gnu-ld"
+fi
+
+# If using newlib, add --with-newlib to the extra_host_args so that gcc/configure
+# can detect this case.
+
+if test x${with_newlib} != xno && echo " ${target_configdirs} " | grep " target-newlib " > /dev/null 2>&1 ; then
+ with_newlib=yes
+ extra_host_args="$extra_host_args --with-newlib"
+fi
+
# Handle ${copy_dirs}
set fnord ${copy_dirs}
shift
shift; shift
done
+# Determine a target-dependent exec_prefix that the installed
+# gcc will search in. Keep this list sorted by triplet, with
+# the *-*-osname triplets last.
+md_exec_prefix=
+case "${target}" in
+ alpha*-*-*vms*)
+ md_exec_prefix=/gnu/lib/gcc-lib
+ ;;
+ i[34567]86-pc-msdosdjgpp*)
+ md_exec_prefix=/dev/env/DJDIR/bin
+ ;;
+ i[34567]86-*-sco3.2v5*)
+ if test $with_gnu_as = yes; then
+ md_exec_prefix=/usr/gnu/bin
+ else
+ md_exec_prefix=/usr/ccs/bin/elf
+ fi
+ ;;
+
+ mn10300-*-* | \
+ powerpc-*-chorusos* | \
+ powerpc*-*-eabi* | \
+ powerpc*-*-sysv* | \
+ powerpc*-*-kaos* | \
+ s390x-ibm-tpf*)
+ md_exec_prefix=/usr/ccs/bin
+ ;;
+ sparc64-*-elf*)
+ ;;
+ v850*-*-*)
+ md_exec_prefix=/usr/ccs/bin
+ ;;
+ xtensa-*-elf*)
+ ;;
+
+ *-*-beos* | \
+ *-*-elf* | \
+ *-*-hpux* | \
+ *-*-netware* | \
+ *-*-nto-qnx* | \
+ *-*-rtems* | \
+ *-*-solaris2* | \
+ *-*-sysv[45]* | \
+ *-*-vxworks* | \
+ *-wrs-windiss)
+ md_exec_prefix=/usr/ccs/bin
+ ;;
+esac
+
extra_arflags_for_target=
extra_nmflags_for_target=
extra_ranlibflags_for_target=
target_makefile_frag=/dev/null
case "${target}" in
+ spu-*-*)
+ target_makefile_frag="config/mt-spu"
+ ;;
*-*-netware*)
target_makefile_frag="config/mt-netware"
;;
;;
esac
-# Set with_gnu_as and with_gnu_ld as appropriate.
-#
-# This is done by determining whether or not the appropriate directory
-# is available, and by checking whether or not specific configurations
-# have requested that this magic not happen.
-#
-# The command line options always override the explicit settings in
-# configure.in, and the settings in configure.in override this magic.
-#
-# If the default for a toolchain is to use GNU as and ld, and you don't
-# want to do that, then you should use the --without-gnu-as and
-# --without-gnu-ld options for the configure script.
-
-if test x${use_gnu_as} = x &&
- echo " ${configdirs} " | grep " gas " > /dev/null 2>&1 ; then
- with_gnu_as=yes
- extra_host_args="$extra_host_args --with-gnu-as"
-fi
-
-if test x${use_gnu_ld} = x &&
- echo " ${configdirs} " | grep " ld " > /dev/null 2>&1 ; then
- with_gnu_ld=yes
- extra_host_args="$extra_host_args --with-gnu-ld"
-fi
-
-# If using newlib, add --with-newlib to the extra_host_args so that gcc/configure
-# can detect this case.
-
-if test x${with_newlib} != xno && echo " ${target_configdirs} " | grep " target-newlib " > /dev/null 2>&1 ; then
- with_newlib=yes
- extra_host_args="$extra_host_args --with-newlib"
-fi
-
# Default to using --with-stabs for certain targets.
if test x${with_stabs} = x ; then
case "${target}" in
tooldir='${exec_prefix}'/${target_alias}
build_tooldir=${tooldir}
-# Generate default definitions for YACC, M4, LEX and other programs that run
-# on the build machine. These are used if the Makefile can't locate these
-# programs in objdir.
-MISSING=`cd $ac_aux_dir && ${PWDCMD-pwd}`/missing
-AC_CHECK_PROGS([CONFIGURED_BISON], [bison], [$MISSING bison])
-AC_CHECK_PROGS([CONFIGURED_YACC], ['bison -y' byacc yacc], [$MISSING bison -y])
-AC_CHECK_PROGS([CONFIGURED_M4], [gm4 gnum4 m4], [$MISSING m4])
-AC_CHECK_PROGS([CONFIGURED_FLEX], [flex], [$MISSING flex])
-AC_CHECK_PROGS([CONFIGURED_LEX], [flex lex], [$MISSING flex])
-AC_CHECK_PROGS([CONFIGURED_MAKEINFO], makeinfo, [$MISSING makeinfo])
-
# Create a .gdbinit file which runs the one in srcdir
# and tells GDB to look there for source files.
fi
;;
esac
+CONFIGURE_GDB_TK=`echo ${GDB_TK} | sed s/-all-/-configure-/g`
+INSTALL_GDB_TK=`echo ${GDB_TK} | sed s/-all-/-install-/g`
# Strip out unwanted targets.
# not to nest @if/@endif pairs, because configure will not warn you at all.
AC_ARG_ENABLE([bootstrap],
-[ --enable-bootstrap[=lean] Enable bootstrapping [no]],,
+[ --enable-bootstrap Enable bootstrapping [yes if native build]],,
enable_bootstrap=default)
# Issue errors and warnings for invalid/strange bootstrap combinations.
case "$have_compiler:$host:$target:$enable_bootstrap" in
*:*:*:no) ;;
- # Default behavior. (We'll) enable bootstrap if we have a compiler
+ # Default behavior. Enable bootstrap if we have a compiler
# and we are in a native configuration.
yes:$build:$build:default)
- # This will become 'yes'
- enable_bootstrap=no ;;
+ enable_bootstrap=yes ;;
*:*:*:default)
enable_bootstrap=no ;;
# We have a compiler and we are in a native configuration, bootstrap is ok
- yes:$build:$build:yes | yes:$build:$build:lean)
+ yes:$build:$build:yes)
;;
# Other configurations, but we have a compiler. Assume the user knows
# what he's doing.
- yes:*:*:yes | yes:*:*:lean)
+ yes:*:*:yes)
AC_MSG_WARN([trying to bootstrap a cross compiler])
;;
# No compiler: if they passed --enable-bootstrap explicitly, fail
- no:*:*:yes | no:*:*:lean)
+ no:*:*:yes)
AC_MSG_ERROR([cannot bootstrap without a compiler]) ;;
# Fail if wrong command line
# Adjust the toplevel makefile according to whether bootstrap was selected.
case "$enable_bootstrap" in
yes)
- bootstrap_lean='#'
- default_target=bootstrap
- bootstrap_suffix=bootstrap ;;
- lean)
- bootstrap_lean=''
- default_target=bootstrap
bootstrap_suffix=bootstrap ;;
no)
- default_target=all
bootstrap_suffix=no-bootstrap ;;
esac
-AC_SUBST(bootstrap_lean)
-AC_SUBST(default_target)
for module in ${build_configdirs} ; do
if test -z "${no_recursion}" \
/^@endif build-$module-$bootstrap_suffix\$/d"
done
for module in ${configdirs} ; do
- if test -z "${no_recursion}" \
- && test -f ${module}/Makefile; then
- echo 1>&2 "*** removing ${module}/Makefile to force reconfigure"
- rm -f ${module}/Makefile
+ if test -z "${no_recursion}"; then
+ for file in stage*-${module}/Makefile prev-${module}/Makefile ${module}/Makefile; do
+ if test -f ${file}; then
+ echo 1>&2 "*** removing ${file} to force reconfigure"
+ rm -f ${file}
+ fi
+ done
fi
extrasub="$extrasub
/^@if $module\$/d
esac
;;
esac
+case "$target" in
+*-mingw*)
+ # Can't be handled as Cygwin above since Mingw does not use newlib.
+ FLAGS_FOR_TARGET=$FLAGS_FOR_TARGET' -L$$r/$(TARGET_SUBDIR)/winsup/mingw -L$$r/$(TARGET_SUBDIR)/winsup/w32api/lib -isystem $$s/winsup/mingw/include -isystem $$s/winsup/w32api/include' ;;
+esac
# Allow the user to override the flags for
# our build compiler if desired.
FLAGS_FOR_TARGET=$FLAGS_FOR_TARGET' -L$$r/$(HOST_SUBDIR)/ld'
fi
-if test "x${CC_FOR_TARGET+set}" = xset; then
- :
-elif test -d ${srcdir}/gcc; then
- CC_FOR_TARGET='$$r/$(HOST_SUBDIR)/gcc/xgcc -B$$r/$(HOST_SUBDIR)/gcc/'
-elif test "$host" = "$target"; then
- CC_FOR_TARGET='$(CC)'
-else
- CC_FOR_TARGET=`echo gcc | sed "${program_transform_name}"`
-fi
-CC_FOR_TARGET=$CC_FOR_TARGET' $(FLAGS_FOR_TARGET)'
-
-if test "x${GCJ_FOR_TARGET+set}" = xset; then
- :
-elif test -d ${srcdir}/gcc; then
- GCJ_FOR_TARGET='$$r/$(HOST_SUBDIR)/gcc/gcj -B$$r/$(HOST_SUBDIR)/gcc/'
-elif test "$host" = "$target"; then
- GCJ_FOR_TARGET='gcj'
-else
- GCJ_FOR_TARGET=`echo gcj | sed "${program_transform_name}"`
-fi
-GCJ_FOR_TARGET=$GCJ_FOR_TARGET' $(FLAGS_FOR_TARGET)'
-
-if test "x${GFORTRAN_FOR_TARGET+set}" = xset; then
- :
-elif test -d ${srcdir}/gcc; then
- GFORTRAN_FOR_TARGET='$$r/$(HOST_SUBDIR)/gcc/gfortran -B$$r/$(HOST_SUBDIR)/gcc/'
-elif test "$host" = "$target"; then
- GFORTRAN_FOR_TARGET='gfortran'
-else
- GFORTRAN_FOR_TARGET=`echo gfortran | sed "${program_transform_name}"`
-fi
-case $GFORTRAN_FOR_TARGET in
-*' $(FLAGS_FOR_TARGET)') ;;
-*) GFORTRAN_FOR_TARGET=$GFORTRAN_FOR_TARGET' $(FLAGS_FOR_TARGET)' ;;
+# Search for other target-specific linker scripts and such.
+case "${target}" in
+ m32c-*-* )
+ if test -d ${srcdir}/libgloss/m32c; then
+ # This is for crt0.o
+ FLAGS_FOR_TARGET=$FLAGS_FOR_TARGET' -B$$r/$(TARGET_SUBDIR)/libgloss/m32c'
+ # This is for r8c.ld
+ FLAGS_FOR_TARGET=$FLAGS_FOR_TARGET' -L$$r/$(TARGET_SUBDIR)/libgloss/m32c'
+ # This is for libnosys.a
+ FLAGS_FOR_TARGET=$FLAGS_FOR_TARGET' -L$$r/$(TARGET_SUBDIR)/libgloss/libnosys'
+ fi
+ ;;
esac
-# Don't use libstdc++-v3's flags to configure/build itself.
-libstdcxx_flags='`test ! -f $$r/$(TARGET_SUBDIR)/libstdc++-v3/scripts/testsuite_flags || $(SHELL) $$r/$(TARGET_SUBDIR)/libstdc++-v3/scripts/testsuite_flags --build-includes` -L$$r/$(TARGET_SUBDIR)/libstdc++-v3/src -L$$r/$(TARGET_SUBDIR)/libstdc++-v3/src/.libs'
-raw_libstdcxx_flags='-L$$r/$(TARGET_SUBDIR)/libstdc++-v3/src -L$$r/$(TARGET_SUBDIR)/libstdc++-v3/src/.libs'
-
-if test "x${CXX_FOR_TARGET+set}" = xset; then
- if test "x${RAW_CXX_FOR_TARGET+set}" != xset; then
- RAW_CXX_FOR_TARGET=${CXX_FOR_TARGET}
- fi
-elif test -d ${srcdir}/gcc; then
- # We add -shared-libgcc to CXX_FOR_TARGET whenever we use xgcc instead
- # of g++ for linking C++ or Java, because g++ has -shared-libgcc by
- # default whereas gcc does not.
- # RAW_CXX_FOR_TARGET is for linking C++ or java; CXX_FOR_TARGET is for
- # all other cases.
- CXX_FOR_TARGET='$$r/$(HOST_SUBDIR)/gcc/g++ -B$$r/$(HOST_SUBDIR)/gcc/ -nostdinc++ '$libstdcxx_flags
- RAW_CXX_FOR_TARGET='$$r/$(HOST_SUBDIR)/gcc/xgcc -shared-libgcc -B$$r/$(HOST_SUBDIR)/gcc/ -nostdinc++ '$raw_libstdcxx_flags
-elif test "$host" = "$target"; then
- CXX_FOR_TARGET='$(CXX)'
- RAW_CXX_FOR_TARGET=${CXX_FOR_TARGET}
-else
- CXX_FOR_TARGET=`echo c++ | sed "${program_transform_name}"`
- RAW_CXX_FOR_TARGET=${CXX_FOR_TARGET}
-fi
-CXX_FOR_TARGET=$CXX_FOR_TARGET' $(FLAGS_FOR_TARGET)'
-RAW_CXX_FOR_TARGET=$RAW_CXX_FOR_TARGET' $(FLAGS_FOR_TARGET)'
-
-qCXX_FOR_TARGET=`echo "$CXX_FOR_TARGET" | sed 's,[[&%]],\\\&,g'`
-qRAW_CXX_FOR_TARGET=`echo "$RAW_CXX_FOR_TARGET" | sed 's,[[&%]],\\\&,g'`
-
-# We want to defer the evaluation of `cmd`s and shell variables in
-# CXX_FOR_TARGET when recursing in the top-level Makefile, such as for
-# bootstrap. We'll enclose CXX_FOR_TARGET_FOR_RECURSIVE_MAKE in single
-# quotes, but we still have to duplicate `$'s so that shell variables
-# can be expanded by the nested make as shell variables, not as make
-# macros.
-qqCXX_FOR_TARGET=`echo "$qCXX_FOR_TARGET" | sed -e 's,[[$]][[$]],$$$$,g'`
-qqRAW_CXX_FOR_TARGET=`echo "$qRAW_CXX_FOR_TARGET" | sed -e 's,[[$]][[$]],$$$$,g'`
-
-# Wrap CC_FOR_TARGET and friends, for certain types of builds.
-CC_FOR_TARGET="\$(STAGE_CC_WRAPPER) ${CC_FOR_TARGET}"
-GCJ_FOR_TARGET="\$(STAGE_CC_WRAPPER) ${GCJ_FOR_TARGET}"
-GFORTRAN_FOR_TARGET="\$(STAGE_CC_WRAPPER) ${GFORTRAN_FOR_TARGET}"
-CXX_FOR_TARGET="\$(STAGE_CC_WRAPPER) ${qCXX_FOR_TARGET}"
-RAW_CXX_FOR_TARGET="\$(STAGE_CC_WRAPPER) ${qRAW_CXX_FOR_TARGET}"
-CXX_FOR_TARGET_FOR_RECURSIVE_MAKE="\$(STAGE_CC_WRAPPER) ${qqCXX_FOR_TARGET}"
-RAW_CXX_FOR_TARGET_FOR_RECURSIVE_MAKE="\$(STAGE_CC_WRAPPER) ${qqRAW_CXX_FOR_TARGET}"
-
# Makefile fragments.
for frag in host_makefile_frag target_makefile_frag alphaieee_frag ospace_frag;
do
# Miscellanea: directories, flags, etc.
AC_SUBST(RPATH_ENVVAR)
-AC_SUBST(BUILD_PREFIX)
-AC_SUBST(BUILD_PREFIX_1)
AC_SUBST(tooldir)
AC_SUBST(build_tooldir)
+AC_SUBST(CONFIGURE_GDB_TK)
AC_SUBST(GDB_TK)
+AC_SUBST(INSTALL_GDB_TK)
# Build module lists & subconfigure args.
AC_SUBST(build_configargs)
# Target module lists & subconfigure args.
AC_SUBST(target_configargs)
-AC_SUBST(target_configdirs)
+
# Build tools.
AC_SUBST(CC_FOR_BUILD)
AC_SUBST(config_shell)
+# Generate default definitions for YACC, M4, LEX and other programs that run
+# on the build machine. These are used if the Makefile can't locate these
+# programs in objdir.
+MISSING=`cd $ac_aux_dir && ${PWDCMD-pwd}`/missing
+
+AC_CHECK_PROGS([YACC], ['bison -y' byacc yacc], [$MISSING bison -y])
+case " $build_configdirs " in
+ *" bison "*) YACC='$$r/$(BUILD_SUBDIR)/bison/tests/bison -y' ;;
+ *" byacc "*) YACC='$$r/$(BUILD_SUBDIR)/byacc/byacc' ;;
+esac
+
+AC_CHECK_PROGS([BISON], [bison], [$MISSING bison])
+case " $build_configdirs " in
+ *" bison "*) BISON='$$r/$(BUILD_SUBDIR)/bison/tests/bison' ;;
+esac
+
+AC_CHECK_PROGS([M4], [gm4 gnum4 m4], [$MISSING m4])
+case " $build_configdirs " in
+ *" m4 "*) M4='$$r/$(BUILD_SUBDIR)/m4/m4' ;;
+esac
+
+AC_CHECK_PROGS([LEX], [flex lex], [$MISSING flex])
+case " $build_configdirs " in
+ *" flex "*) LEX='$$r/$(BUILD_SUBDIR)/flex/flex' ;;
+ *" lex "*) LEX='$$r/$(BUILD_SUBDIR)/lex/lex' ;;
+esac
+
+AC_CHECK_PROGS([FLEX], [flex], [$MISSING flex])
+case " $build_configdirs " in
+ *" flex "*) FLEX='$$r/$(BUILD_SUBDIR)/flex/flex' ;;
+esac
+
+AC_CHECK_PROGS([MAKEINFO], makeinfo, [$MISSING makeinfo])
+case " $build_configdirs " in
+ *" texinfo "*) MAKEINFO='$$r/$(BUILD_SUBDIR)/texinfo/makeinfo/makeinfo' ;;
+ *)
+changequote(,)
+ # For an installed makeinfo, we require it to be from texinfo 4.4 or
+ # higher, else we use the "missing" dummy.
+ if ${MAKEINFO} --version \
+ | egrep 'texinfo[^0-9]*([1-3][0-9]|4\.[4-9]|[5-9])' >/dev/null 2>&1; then
+ :
+ else
+ MAKEINFO="$MISSING makeinfo"
+ fi
+ ;;
+changequote([,])
+esac
+
+# FIXME: expect and dejagnu may become build tools?
+
+AC_CHECK_PROGS(EXPECT, expect, expect)
+case " $configdirs " in
+ *" expect "*)
+ test $host = $build && EXPECT='$$r/$(HOST_SUBDIR)/expect/expect'
+ ;;
+esac
+
+AC_CHECK_PROGS(RUNTEST, runtest, runtest)
+case " $configdirs " in
+ *" dejagnu "*)
+ test $host = $build && RUNTEST='$$s/$(HOST_SUBDIR)/dejagnu/runtest'
+ ;;
+esac
+
+
# Host tools.
-NCN_STRICT_CHECK_TOOL(AR, ar)
-NCN_STRICT_CHECK_TOOL(AS, as)
-NCN_STRICT_CHECK_TOOL(DLLTOOL, dlltool)
-NCN_STRICT_CHECK_TOOL(LD, ld)
-NCN_STRICT_CHECK_TOOL(NM, nm)
-NCN_STRICT_CHECK_TOOL(RANLIB, ranlib, :)
-NCN_STRICT_CHECK_TOOL(WINDRES, windres)
-NCN_STRICT_CHECK_TOOL(OBJCOPY, objcopy)
-NCN_STRICT_CHECK_TOOL(OBJDUMP, objdump)
+NCN_STRICT_CHECK_TOOLS(AR, ar)
+NCN_STRICT_CHECK_TOOLS(AS, as)
+NCN_STRICT_CHECK_TOOLS(DLLTOOL, dlltool)
+NCN_STRICT_CHECK_TOOLS(LD, ld)
+NCN_STRICT_CHECK_TOOLS(LIPO, lipo)
+NCN_STRICT_CHECK_TOOLS(NM, nm)
+NCN_STRICT_CHECK_TOOLS(RANLIB, ranlib, :)
+NCN_STRICT_CHECK_TOOLS(STRIP, strip, :)
+NCN_STRICT_CHECK_TOOLS(WINDRES, windres)
+NCN_STRICT_CHECK_TOOLS(OBJCOPY, objcopy)
+NCN_STRICT_CHECK_TOOLS(OBJDUMP, objdump)
AC_SUBST(CC)
AC_SUBST(CXX)
AC_SUBST(CFLAGS)
AC_SUBST(CXXFLAGS)
# Target tools.
-NCN_STRICT_CHECK_TARGET_TOOL(CONFIGURED_AR_FOR_TARGET, ar)
-NCN_STRICT_CHECK_TARGET_TOOL(CONFIGURED_AS_FOR_TARGET, as)
-NCN_STRICT_CHECK_TARGET_TOOL(CONFIGURED_DLLTOOL_FOR_TARGET, dlltool)
-NCN_STRICT_CHECK_TARGET_TOOL(CONFIGURED_LD_FOR_TARGET, ld)
-NCN_STRICT_CHECK_TARGET_TOOL(CONFIGURED_NM_FOR_TARGET, nm)
-NCN_STRICT_CHECK_TARGET_TOOL(CONFIGURED_RANLIB_FOR_TARGET, ranlib, :)
-NCN_STRICT_CHECK_TARGET_TOOL(CONFIGURED_WINDRES_FOR_TARGET, windres)
-
-AC_SUBST(GCC_FOR_TARGET)
+AC_ARG_WITH([build-time-tools],
+ [ --with-build-time-tools=path
+ use given path to find target tools during the build],
+ [case x"$withval" in
+ x/*) ;;
+ *)
+ with_build_time_tools=
+ AC_MSG_WARN([argument to --with-build-time-tools must be an absolute path])
+ ;;
+ esac],
+ [with_build_time_tools=])
+
+NCN_STRICT_CHECK_TARGET_TOOLS(CC_FOR_TARGET, cc gcc)
+NCN_STRICT_CHECK_TARGET_TOOLS(CXX_FOR_TARGET, c++ g++ cxx gxx)
+NCN_STRICT_CHECK_TARGET_TOOLS(GCC_FOR_TARGET, gcc, ${CC_FOR_TARGET})
+NCN_STRICT_CHECK_TARGET_TOOLS(GCJ_FOR_TARGET, gcj)
+NCN_STRICT_CHECK_TARGET_TOOLS(GFORTRAN_FOR_TARGET, gfortran)
+
+ACX_CHECK_INSTALLED_TARGET_TOOL(AR_FOR_TARGET, ar)
+ACX_CHECK_INSTALLED_TARGET_TOOL(AS_FOR_TARGET, as)
+ACX_CHECK_INSTALLED_TARGET_TOOL(DLLTOOL_FOR_TARGET, dlltool)
+ACX_CHECK_INSTALLED_TARGET_TOOL(LD_FOR_TARGET, ld)
+ACX_CHECK_INSTALLED_TARGET_TOOL(LIPO_FOR_TARGET, lipo)
+ACX_CHECK_INSTALLED_TARGET_TOOL(NM_FOR_TARGET, nm)
+ACX_CHECK_INSTALLED_TARGET_TOOL(OBJDUMP_FOR_TARGET, objdump)
+ACX_CHECK_INSTALLED_TARGET_TOOL(RANLIB_FOR_TARGET, ranlib, :)
+ACX_CHECK_INSTALLED_TARGET_TOOL(STRIP_FOR_TARGET, strip)
+ACX_CHECK_INSTALLED_TARGET_TOOL(WINDRES_FOR_TARGET, windres)
+
+RAW_CXX_FOR_TARGET="$CXX_FOR_TARGET"
+
+GCC_TARGET_TOOL(ar, AR_FOR_TARGET, AR, [binutils/ar])
+GCC_TARGET_TOOL(as, AS_FOR_TARGET, AS, [gas/as-new])
+GCC_TARGET_TOOL(cc, CC_FOR_TARGET, CC, [gcc/xgcc -B$$r/$(HOST_SUBDIR)/gcc/])
+GCC_TARGET_TOOL(c++, CXX_FOR_TARGET, CXX,
+ [gcc/g++ -B$$r/$(HOST_SUBDIR)/gcc/ -nostdinc++ `test ! -f $$r/$(TARGET_SUBDIR)/libstdc++-v3/scripts/testsuite_flags || $(SHELL) $$r/$(TARGET_SUBDIR)/libstdc++-v3/scripts/testsuite_flags --build-includes` -L$$r/$(TARGET_SUBDIR)/libstdc++-v3/src -L$$r/$(TARGET_SUBDIR)/libstdc++-v3/src/.libs],
+ c++)
+GCC_TARGET_TOOL(c++ for libstdc++, RAW_CXX_FOR_TARGET, CXX,
+ [gcc/xgcc -shared-libgcc -B$$r/$(HOST_SUBDIR)/gcc -nostdinc++ -L$$r/$(TARGET_SUBDIR)/libstdc++-v3/src -L$$r/$(TARGET_SUBDIR)/libstdc++-v3/src/.libs],
+ c++)
+GCC_TARGET_TOOL(dlltool, DLLTOOL_FOR_TARGET, DLLTOOL, [binutils/dlltool])
+GCC_TARGET_TOOL(gcc, GCC_FOR_TARGET, , [gcc/xgcc -B$$r/$(HOST_SUBDIR)/gcc/])
+GCC_TARGET_TOOL(gcj, GCJ_FOR_TARGET, GCJ,
+ [gcc/gcj -B$$r/$(HOST_SUBDIR)/gcc/], java)
+GCC_TARGET_TOOL(gfortran, GFORTRAN_FOR_TARGET, GFORTRAN,
+ [gcc/gfortran -B$$r/$(HOST_SUBDIR)/gcc/], fortran)
+GCC_TARGET_TOOL(ld, LD_FOR_TARGET, LD, [ld/ld-new])
+GCC_TARGET_TOOL(lipo, LIPO_FOR_TARGET, LIPO)
+GCC_TARGET_TOOL(nm, NM_FOR_TARGET, NM, [binutils/nm-new])
+GCC_TARGET_TOOL(objdump, OBJDUMP_FOR_TARGET, OBJDUMP, [binutils/objdump])
+GCC_TARGET_TOOL(ranlib, RANLIB_FOR_TARGET, RANLIB, [binutils/ranlib])
+GCC_TARGET_TOOL(strip, STRIP_FOR_TARGET, STRIP, [binutils/strip])
+GCC_TARGET_TOOL(windres, WINDRES_FOR_TARGET, WINDRES, [binutils/windres])
+
AC_SUBST(FLAGS_FOR_TARGET)
-AC_SUBST(CC_FOR_TARGET)
-AC_SUBST(GCJ_FOR_TARGET)
-AC_SUBST(GFORTRAN_FOR_TARGET)
-AC_SUBST(CXX_FOR_TARGET)
AC_SUBST(RAW_CXX_FOR_TARGET)
-AC_SUBST(CXX_FOR_TARGET_FOR_RECURSIVE_MAKE)
-AC_SUBST(RAW_CXX_FOR_TARGET_FOR_RECURSIVE_MAKE)
-
-# Fix up target tools.
-if test "x${build}" = "x${host}" ; then
- # In this case, the newly built tools can and should be used,
- # so we override the results of the autoconf tests.
- # This should really only happen when the tools are actually being built,
- # but that's a further refinement. The new build scheme, where
- # tools are built into a structure paralleling where they're installed,
- # should also eliminate all of this cleanly.
- AR_FOR_TARGET="\$(USUAL_AR_FOR_TARGET)"
- AS_FOR_TARGET="\$(USUAL_AS_FOR_TARGET)"
- DLLTOOL_FOR_TARGET="\$(USUAL_DLLTOOL_FOR_TARGET)"
- LD_FOR_TARGET="\$(USUAL_LD_FOR_TARGET)"
- NM_FOR_TARGET="\$(USUAL_NM_FOR_TARGET)"
- RANLIB_FOR_TARGET="\$(USUAL_RANLIB_FOR_TARGET)"
- WINDRES_FOR_TARGET="\$(USUAL_WINDRES_FOR_TARGET)"
-else
- # Just use the ones we found.
- AR_FOR_TARGET="\$(CONFIGURED_AR_FOR_TARGET)"
- AS_FOR_TARGET="\$(CONFIGURED_AS_FOR_TARGET)"
- DLLTOOL_FOR_TARGET="\$(CONFIGURED_DLLTOOL_FOR_TARGET)"
- LD_FOR_TARGET="\$(CONFIGURED_LD_FOR_TARGET)"
- NM_FOR_TARGET="\$(CONFIGURED_NM_FOR_TARGET)"
- RANLIB_FOR_TARGET="\$(CONFIGURED_RANLIB_FOR_TARGET)"
- WINDRES_FOR_TARGET="\$(CONFIGURED_WINDRES_FOR_TARGET)"
-fi
-AC_SUBST(AR_FOR_TARGET)
-AC_SUBST(AS_FOR_TARGET)
-AC_SUBST(DLLTOOL_FOR_TARGET)
-AC_SUBST(LD_FOR_TARGET)
-AC_SUBST(NM_FOR_TARGET)
-AC_SUBST(RANLIB_FOR_TARGET)
-AC_SUBST(WINDRES_FOR_TARGET)
# Certain tools may need extra flags.
AR_FOR_TARGET=${AR_FOR_TARGET}${extra_arflags_for_target}
RANLIB_FOR_TARGET=${RANLIB_FOR_TARGET}${extra_ranlibflags_for_target}
NM_FOR_TARGET=${NM_FOR_TARGET}${extra_nmflags_for_target}
+# When building target libraries, except in a Canadian cross, we use
+# the same toolchain as the compiler we just built.
+COMPILER_AS_FOR_TARGET='$(AS_FOR_TARGET)'
+COMPILER_LD_FOR_TARGET='$(LD_FOR_TARGET)'
+COMPILER_NM_FOR_TARGET='$(NM_FOR_TARGET)'
+if test $host = $build; then
+ case " $configdirs " in
+ *" gcc "*)
+ COMPILER_AS_FOR_TARGET='$$r/$(HOST_SUBDIR)/gcc/as'
+ COMPILER_LD_FOR_TARGET='$$r/$(HOST_SUBDIR)/gcc/collect-ld'
+ COMPILER_NM_FOR_TARGET='$$r/$(HOST_SUBDIR)/gcc/nm'${extra_nmflags_for_target}
+ ;;
+ esac
+fi
+
+AC_SUBST(COMPILER_AS_FOR_TARGET)
+AC_SUBST(COMPILER_LD_FOR_TARGET)
+AC_SUBST(COMPILER_NM_FOR_TARGET)
+
AC_MSG_CHECKING([whether to enable maintainer-specific portions of Makefiles])
AC_ARG_ENABLE(maintainer-mode,
[ --enable-maintainer-mode enable make rules and dependencies not useful
yes) stage1_cflags="-g -Wa,-J" ;;
*) stage1_cflags="-g -J" ;;
esac ;;
- powerpc-*-darwin*)
- # The spiffy cpp-precomp chokes on some legitimate constructs in GCC
- # sources; use -no-cpp-precomp to get to GNU cpp.
- # Apple's GCC has bugs in designated initializer handling, so disable
- # that too.
- stage1_cflags="-g -no-cpp-precomp -DHAVE_DESIGNATED_INITIALIZERS=0"
- ;;
esac
-AC_SUBST(stage1_cflags)
-# It makes debugging easier if we create as symlinks the stage directories
-# gcc for stageN-gcc and stagePREV-gcc for stage(N-1). In case this is not
-# possible, however, we can resort to mv.
-AC_CACHE_CHECK([if symbolic links between directories work],
-[gcc_cv_prog_ln_s_dir],
-[if test "${LN_S}" = "ln -s" \
- && mkdir confdir.s1 \
- && ln -s confdir.s1 confdir.s2 \
- && echo timestamp1 > confdir.s1/conftest.1 \
- && cmp confdir.s1/conftest.1 confdir.s2/conftest.1 \
- && echo timestamp2 > confdir.s2/conftest.2 \
- && cmp confdir.s1/conftest.2 confdir.s1/conftest.2 \
- && rm -f confdir.s2; then
- gcc_cv_prog_ln_s_dir=yes
-else
- gcc_cv_prog_ln_s_dir=no
+# This is aimed to mimic bootstrap with a non-GCC compiler to catch problems.
+if test "$GCC" = yes; then
+ saved_CFLAGS="$CFLAGS"
+
+ # Pass -fkeep-inline-functions for stage 1 if the GCC version supports it.
+ CFLAGS="$CFLAGS -fkeep-inline-functions"
+ AC_MSG_CHECKING([whether -fkeep-inline-functions is supported])
+ AC_TRY_COMPILE(,,
+ [AC_MSG_RESULT([yes]); stage1_cflags="$stage1_cflags -fkeep-inline-functions"],
+ [AC_MSG_RESULT([no])])
+
+ CFLAGS="$saved_CFLAGS"
fi
-rm -rf confdir.s1 confdir.s2])
-case ${gcc_cv_prog_ln_s_dir} in
- yes)
- CREATE_LINK_TO_DIR='ln -s $$1 $$2'
- UNDO_LINK_TO_DIR='rm -f $$1' ;;
- *)
- CREATE_LINK_TO_DIR='mv $$1 $$2'
- UNDO_LINK_TO_DIR='mv $$1 $$2' ;;
-esac
-AC_SUBST(CREATE_LINK_TO_DIR)
-AC_SUBST(UNDO_LINK_TO_DIR)
+AC_SUBST(stage1_cflags)
+
+# Enable --enable-checking in stage1 of the compiler.
+AC_ARG_ENABLE(stage1-checking,
+[ --enable-stage1-checking[=all] choose additional checking for stage1
+ of the compiler.],
+[stage1_checking=--enable-checking=${enable_stage1_checking}],
+[if test "x$enable_checking" = xno; then
+ stage1_checking=--enable-checking
+else
+ stage1_checking=--enable-checking${enable_checking+=}$enable_checking
+fi])
+AC_SUBST(stage1_checking)
# Enable -Werror in bootstrap stage2 and later.
# Change the default to "no" on release branches.
esac
AC_SUBST(stage2_werror_flag)
+# Flags needed to enable html installing and building
+AC_ARG_WITH(datarootdir,
+[ --with-datarootdir Use datarootdir as the data root directory.],
+[datarootdir="\${prefix}/${withval}"],
+[datarootdir="\${prefix}/share"])
+
+AC_ARG_WITH(docdir,
+[ --with-docdir Install documentation in this directory.],
+[docdir="\${prefix}/${withval}"],
+[docdir="\${datarootdir}/doc"])
+
+AC_ARG_WITH(htmldir,
+[ --with-htmldir Install html in this directory.],
+[htmldir="\${prefix}/${withval}"],
+[htmldir="\${docdir}"])
+
+AC_SUBST(datarootdir)
+AC_SUBST(docdir)
+AC_SUBST(htmldir)
+
AC_OUTPUT(Makefile)