## For more information on these two systems, check out the documentation
## for 'Autoconf' (autoconf.texi) and 'Configure' (configure.texi).
-# Copyright (C) 1992, 93, 94, 95, 1996 Free Software Foundation, Inc.
+# Copyright (C) 1992, 93, 94, 95, 96, 1997 Free Software Foundation, Inc.
#
# This file is free software; you can redistribute it and/or modify it
# under the terms of the GNU General Public License as published by
# these libraries are used by various programs built for the host environment
#
-host_libs="mmalloc libiberty opcodes bfd readline gash tcl tk tclX"
+host_libs="mmalloc libiberty opcodes bfd readline gash db tcl tk tclX itcl"
+# start-sanitize-ide
+host_libs="${host_libs} libide"
+# end-sanitize-ide
if [ "${enable_gdbgui}" = "yes" ] ; then
host_libs="${host_libs} libgui"
fi
# these tools are built for the host environment
-#
-host_tools="texinfo byacc flex bison binutils ld gas gcc gdb make patch
- prms send-pr gprof gdbtest tgas etc expect dejagnu sim
- m4 autoconf ispell grep diff rcs cvs fileutils shellutils
- textutils wdiff find emacs emacs19 uudecode hello tar gzip indent
- recode release sed utils guile perl apache inet"
-
+# Note, the powerpc-eabi build depends on sim occurring before gdb in order to
+# know that we are building the simulator.
+host_tools="texinfo byacc flex bison binutils ld gas gcc sim gdb make patch prms send-pr gprof gdbtest tgas etc expect dejagnu bash m4 autoconf automake ispell grep diff rcs cvs fileutils shellutils time textutils wdiff find emacs emacs19 uudecode hello tar gzip indent recode release sed utils guile perl apache inet gawk findutils sn"
+# start-sanitize-ide
+host_tools="${host_tools} ilu vmake"
+# end-sanitize-ide
# these libraries are built for the target environment, and are built after
# the host libraries and the host tools (which may be a cross compiler)
# directories to be built in the native environment only
#
-native_only="autoconf cvs emacs emacs19 fileutils find grep gzip hello
- indent ispell m4 rcs recode sed shellutils tar textutils gash
- uudecode wdiff gprof target-groff guile perl apache inet"
+# This must be a single line because of the way it is searched by grep in
+# the code below.
+native_only="autoconf automake cvs emacs emacs19 fileutils find gawk grep gzip hello indent ispell m4 rcs recode sed shellutils tar textutils gash uudecode wdiff gprof target-groff guile perl apache inet time bash prms sn gnuserv"
# directories to be built in a cross environment only
#
-cross_only="target-libiberty target-libgloss target-newlib"
+cross_only="target-libgloss target-newlib"
## All tools belong in one of the four categories, and are assigned above
## We assign ${configdirs} this way to remove all embedded newlines. This
m68k-hp-hpux*) host_makefile_frag=config/mh-hp300 ;;
m68k-apollo-sysv*) host_makefile_frag=config/mh-apollo68 ;;
m68k-apollo-bsd*) host_makefile_frag=config/mh-a68bsd ;;
- m68k-*-linux*) host_makefile_frag=config/mh-linux ;;
m88k-dg-dgux*) host_makefile_frag=config/mh-dgux ;;
m88k-harris-cxux*) host_makefile_frag=config/mh-cxux ;;
m88k-motorola-sysv*) host_makefile_frag=config/mh-delta88;;
mips*-dec-ultrix*) host_makefile_frag=config/mh-decstation ;;
mips*-nec-sysv4*) host_makefile_frag=config/mh-necv4 ;;
- mips*-sgi-irix[56]*) host_makefile_frag=config/mh-irix5 ;;
+ mips*-sgi-irix6*) host_makefile_frag=config/mh-irix6 ;;
+ mips*-sgi-irix5*) host_makefile_frag=config/mh-irix5 ;;
mips*-sgi-irix4*) host_makefile_frag=config/mh-irix4 ;;
mips*-sgi-irix3*) host_makefile_frag=config/mh-sysv ;;
mips*-*-sysv4*) host_makefile_frag=config/mh-sysv4 ;;
mips*-*-sysv*) host_makefile_frag=config/mh-riscos ;;
- i[345]86-ncr-sysv4.3) host_makefile_frag=config/mh-ncrsvr43 ;;
- i[345]86-ncr-sysv4*) host_makefile_frag=config/mh-ncr3000 ;;
- i[345]86-*-sco3.2v5*) host_makefile_frag=config/mh-sysv ;;
- i[345]86-*-sco*) host_makefile_frag=config/mh-sco ;;
- i[345]86-*-isc*) host_makefile_frag=config/mh-sysv ;;
- i[345]86-*-linux*) host_makefile_frag=config/mh-linux ;;
- i[345]86-*-solaris2*) host_makefile_frag=config/mh-sysv4 ;;
- i[345]86-*-aix*) host_makefile_frag=config/mh-aix386 ;;
- i[345]86-*-go32*) host_makefile_frag=config/mh-go32 ;;
+ i[3456]86-*-dgux*) host_makefile_frag=config/mh-dgux386 ;;
+ i[3456]86-ncr-sysv4.3) host_makefile_frag=config/mh-ncrsvr43 ;;
+ i[3456]86-ncr-sysv4*) host_makefile_frag=config/mh-ncr3000 ;;
+ i[3456]86-*-sco3.2v5*) host_makefile_frag=config/mh-sysv ;;
+ i[3456]86-*-sco*) host_makefile_frag=config/mh-sco ;;
+ i[3456]86-*-isc*) host_makefile_frag=config/mh-sysv ;;
+ i[3456]86-*-solaris2*) host_makefile_frag=config/mh-sysv4 ;;
+ i[3456]86-*-aix*) host_makefile_frag=config/mh-aix386 ;;
+ i[3456]86-*-go32*) host_makefile_frag=config/mh-go32 ;;
+ *-cygwin32*) host_makefile_frag=config/mh-cygwin32 ;;
+ *-windows*) host_makefile_frag=config/mh-windows ;;
vax-*-ultrix2*) host_makefile_frag=config/mh-vaxult2 ;;
*-*-solaris2*) host_makefile_frag=config/mh-solaris ;;
m68k-sun-sunos*) host_makefile_frag=config/mh-sun3 ;;
waugh=
case "${host}" in
hppa*) waugh=config/mh-papic ;;
- i[345]86-*) waugh=config/mh-x86pic ;;
+ i[3456]86-*) waugh=config/mh-x86pic ;;
sparc64-*) waugh=config/mh-sparcpic ;;
*) waugh=config/mh-${host_cpu}pic ;;
esac
case "${target}" in
v810*) target_makefile_frag=config/mt-v810 ;;
- i[345]86-*-netware*) target_makefile_frag=config/mt-netware ;;
+ i[3456]86-*-netware*) target_makefile_frag=config/mt-netware ;;
+# start-sanitize-r5900
+ mips64vr5900*-*-*) target_makefile_frag=config/mt-r5900 ;;
+# end-sanitize-r5900
powerpc-*-netware*) target_makefile_frag=config/mt-netware ;;
esac
;;
no)
skipdirs="${skipdirs} tk gash"
+# start-sanitize-ide
+ skipdirs="${skipdirs} libide vmake"
+# end-sanitize-ide
;;
*)
echo "*** bad value \"${with_x}\" for -with-x flag; ignored" 1>&2
# Default to using --with-stabs for certain targets.
if [ x${with_stabs} = x ]; then
case "${target}" in
- mips*-*-* | alpha*-*-osf* | i[345]86*-*-sysv4* | i[345]86*-*-unixware*)
+ mips*-*-irix6*)
+ ;;
+ mips*-*-* | alpha*-*-osf* | i[3456]86*-*-sysv4* | i[3456]86*-*-unixware*)
with_stabs=yes;
withoptions="${withoptions} --with-stabs"
;;
# Configure extra directories which are host specific
case "${host}" in
- i[345]86-*-go32*)
+ i[3456]86-*-go32*)
+ configdirs="$configdirs dosrel" ;;
+ *-cygwin32*)
configdirs="$configdirs dosrel" ;;
esac
noconfigdirs=""
case "${host}" in
- i[345]86-*-vsta)
- noconfigdirs="tcl expect dejagnu make texinfo bison patch flex byacc send-pr gprof uudecode dejagnu diff guile perl apache inet"
- ;;
- i[345]86-*-go32)
- noconfigdirs="tcl tk expect dejagnu make texinfo bison patch flex byacc send-pr gprof uudecode dejagnu diff guile perl apache inet"
+ i[3456]86-*-vsta)
+ noconfigdirs="tcl expect dejagnu make texinfo bison patch flex byacc send-pr gprof uudecode dejagnu diff guile perl apache inet itcl db sn gnuserv"
+# start-sanitize-ide
+ noconfigdirs="$noconfigdirs libide vmake"
+# end-sanitize-ide
+ ;;
+ i[3456]86-*-go32)
+ noconfigdirs="tcl tk expect dejagnu make texinfo bison patch flex byacc send-pr gprof uudecode dejagnu diff guile perl apache inet itcl db sn gnuserv"
+# start-sanitize-ide
+ noconfigdirs="$noconfigdirs libide vmake"
+# end-sanitize-ide
;;
*-*-cygwin32)
- noconfigdirs="patch diff tk tcl expect dejagnu cvs autoconf texinfo bison send-pr gprof rcs guile perl apache inet"
+ noconfigdirs="expect dejagnu cvs autoconf automake bison send-pr gprof rcs guile perl texinfo apache inet itcl db sn gnuserv"
+# start-sanitize-ide
+ noconfigdirs="$noconfigdirs libide vmake"
+# end-sanitize-ide
+ ;;
+ *-*-windows*)
+# This is only used to build WinGDB...
+ configdirs="bfd gdb libiberty opcodes readline sim"
+ target_configdirs=
;;
ppc*-*-pe)
- noconfigdirs="patch diff make tk tcl expect dejagnu cvs autoconf texinfo bison send-pr gprof rcs guile perl apache inet"
+ noconfigdirs="patch diff make tk tcl expect dejagnu cvs autoconf automake texinfo bison send-pr gprof rcs guile perl apache inet itcl db sn gnuserv"
+# start-sanitize-ide
+ noconfigdirs="$noconfigdirs libide vmake"
+# end-sanitize-ide
;;
esac
*-*-vxworks*)
noconfigdirs="$noconfigdirs target-newlib target-libgloss"
;;
- *-*-ose)
- noconfigdirs="$noconfigdirs target-libgloss"
- ;;
alpha-dec-osf*)
# ld works, but does not support shared libraries. emacs doesn't
# work. newlib is not 64 bit ready. I'm not sure about fileutils or grep.
# gas doesn't generate exception information.
noconfigdirs="$noconfigdirs gas ld emacs fileutils grep target-newlib target-libgloss"
;;
+ alpha*-*-*vms*)
+ noconfigdirs="$noconfigdirs gdb ld target-newlib target-libgloss"
+ ;;
alpha*-*-*)
# newlib is not 64 bit ready
noconfigdirs="$noconfigdirs target-newlib target-libgloss"
arm-*-pe*)
noconfigdirs="$noconfigdirs target-libgloss"
;;
+ arm-*-coff*)
+ noconfigdirs="$noconfigdirs target-libgloss"
+ ;;
arm-*-riscix*)
noconfigdirs="$noconfigdirs ld target-libgloss"
;;
+ d10v-*-*)
+ noconfigdirs="$noconfigdirs target-librx target-libg++ target-libstdc++ target-libio target-libgloss"
+ ;;
+# start-sanitize-d30v
+ d30v-*-*)
+ noconfigdirs="$noconfigdirs tcl tk expect gcc gdb newlib target-librx target-libg++ target-libstdc++ target-libio target-libgloss itcl db sn gnuserv target-libiberty target-newlib target-examples"
+# start-sanitize-ide
+ noconfigdirs="$noconfigdirs libide vmake"
+# end-sanitize-ide
+ ;;
+# end-sanitize-d30v
h8300*-*-* | \
h8500-*-*)
noconfigdirs="$noconfigdirs target-libg++ target-libstdc++ target-libio target-librx target-libgloss"
;;
hppa*-*-*elf* | \
- hppa*-*-lites*)
+ hppa*-*-lites* | \
+ hppa*-*-rtems* )
# Do configure ld/binutils/gas for this case.
;;
hppa*-*-*)
esac
noconfigdirs="$noconfigdirs ld shellutils"
;;
- i[345]86-*-go32)
+ i[3456]86-*-go32)
# but don't build gdb
noconfigdirs="$noconfigdirs gdb target-libg++ target-libstdc++ target-libio target-librx"
;;
*-*-cygwin32)
target_configdirs="$target_configdirs target-winsup"
- noconfigdirs="$noconfigdirs tcl tk expect target-libgloss"
+ noconfigdirs="$noconfigdirs expect target-libgloss itcl db sn gnuserv"
+# start-sanitize-ide
+ noconfigdirs="$noconfigdirs libide vmake"
+# end-sanitize-ide
# always build newlib.
skipdirs=`echo " ${skipdirs} " | sed -e 's/ target-newlib / /'`
# Can't build gdb for cygwin32 if not native.
- case "${host}:${build}" in
- *-*-cygwin32 | *-*-cygwin32:*-*-cygwin32) ;; # keep gdb
- *) noconfigdirs="$noconfigdirs gdb"
+ case "${host}" in
+ *-*-cygwin32) ;; # keep gdb tcl tk expect
+ *) noconfigdirs="$noconfigdirs gdb tcl tk expect"
esac
;;
- i[345]86-*-pe)
+ i[3456]86-*-pe)
noconfigdirs="$noconfigdirs target-libg++ target-libstdc++ target-libio target-librx target-libgloss"
;;
- i[345]86-*-sco3.2v5*)
+ i[3456]86-*-sco3.2v5*)
# The linker does not yet know about weak symbols in COFF,
# and is not configured to handle mixed ELF and COFF.
noconfigdirs="$noconfigdirs gprof ld target-libgloss"
;;
- i[345]86-*-sco*)
+ i[3456]86-*-sco*)
noconfigdirs="$noconfigdirs gprof target-libgloss"
;;
- i[345]86-*-solaris2*)
+ i[3456]86-*-solaris2*)
# The linker does static linking correctly, but the Solaris C library
# has bugs such that some important functions won't work when statically
# linked. (See man pages for getpwuid, for example.)
noconfigdirs="$noconfigdirs ld target-libgloss"
;;
- i[345]86-*-sysv4*)
+ i[3456]86-*-sysv4*)
# The SYSV4 C compiler doesn't handle Emacs correctly
case "${CC}" in
"" | cc*) noconfigdirs="$noconfigdirs emacs emacs19" ;;
# but that's okay since emacs doesn't work anyway
noconfigdirs="$noconfigdirs emacs emacs19 target-libgloss"
;;
+ mn10200-*-*)
+ noconfigdirs="$noconfigdirs target-libgloss"
+ ;;
+ mn10300-*-*)
+ noconfigdirs="$noconfigdirs target-libgloss"
+ ;;
powerpc-*-aix*)
# copied from rs6000-*-* entry
noconfigdirs="$noconfigdirs gprof cvs target-libgloss"
;;
powerpc*-*-winnt* | powerpc*-*-pe* | ppc*-*-pe)
target_configdirs="$target_configdirs target-winsup"
- noconfigdirs="$noconfigdirs gdb tcl tk make expect target-libgloss"
+ noconfigdirs="$noconfigdirs gdb tcl tk make expect target-libgloss itcl db sn gnuserv"
+# start-sanitize-ide
+ noconfigdirs="$noconfigdirs libide vmake"
+# end-sanitize-ide
# always build newlib.
skipdirs=`echo " ${skipdirs} " | sed -e 's/ target-newlib / /'`
;;
# This is temporary until we can link against shared libraries
powerpcle-*-solaris*)
- noconfigdirs="$noconfigdirs gdb sim make tcl tk expect"
+ noconfigdirs="$noconfigdirs gdb sim make tcl tk expect itcl db sn gnuserv"
+# start-sanitize-ide
+ noconfigdirs="$noconfigdirs libide vmake"
+# end-sanitize-ide
;;
rs6000-*-lynxos*)
# The CVS server code doesn't work on the RS/6000
# emacs is emacs 18, which does not work on Irix 5 (emacs19 does work)
noconfigdirs="$noconfigdirs ld gprof emacs target-libgloss"
;;
+ mips*-*-irix6*)
+ # The GNU assembler and linker do not support IRIX 6.
+ # emacs is emacs 18, which does not work on Irix 5 (emacs19 does work)
+ noconfigdirs="$noconfigdirs ld gas gprof emacs target-libgloss"
+ ;;
mips*-dec-bsd*)
noconfigdirs="$noconfigdirs gprof target-libgloss"
;;
;;
sh-*-*)
case "${host}" in
- i[345]86-*-vsta) ;; # don't add gprof back in
- i[345]86-*-go32) ;; # don't add gprof back in
+ i[3456]86-*-vsta) ;; # don't add gprof back in
+ i[3456]86-*-go32) ;; # don't add gprof back in
*) skipdirs=`echo " ${skipdirs} " | sed -e 's/ gprof / /'` ;;
esac
noconfigdirs="$noconfigdirs target-libgloss"
v810-*-*)
noconfigdirs="$noconfigdirs bfd binutils gas gcc gdb ld target-libio target-libg++ target-libstdc++ opcodes target-libgloss"
;;
+# start-sanitize-v850
+ v850-*-*)
+ noconfigdirs="$noconfigdirs target-libgloss"
+ ;;
+# end-sanitize-v850
vax-*-vms)
noconfigdirs="$noconfigdirs bfd binutils gdb ld target-newlib opcodes target-libgloss"
;;
# If we are building a Canadian Cross, discard tools that can not be built
# using a cross compiler. FIXME: These tools should be fixed.
if [ "${build}" != "${host}" ]; then
- noconfigdirs="$noconfigdirs expect dejagnu make texinfo diff"
+ noconfigdirs="$noconfigdirs expect dejagnu itcl db sn gnuserv"
+# start-sanitize-ide
+ noconfigdirs="$noconfigdirs libide ilu vmake"
+# end-sanitize-ide
fi
# Make sure we don't let GNU ld be added if we didn't want it.
fi
fi
+# If using newlib, add --with-newlib to the withoptions so that gcc/configure
+# can detect this case.
+
+if [ x${with_newlib} != xno ] && echo " ${target_configdirs} " | grep " target-newlib " > /dev/null 2>&1 && [ -d ${srcdir}/newlib ] ; then
+ with_newlib=yes
+ withoptions="$withoptions --with-newlib"
+fi
+
if [ x${shared} = xyes ]; then
case "${target}" in
hppa*) target_makefile_frag=config/mt-papic ;;
- i[345]86-*) target_makefile_frag=config/mt-x86pic ;;
+ i[3456]86-*) target_makefile_frag=config/mt-x86pic ;;
*) target_makefile_frag=config/mt-${target_cpu}pic ;;
esac
fi
targargs="--with-cross-host=${host_alias} ${targargs}"
fi
+# Default to --enable-multilib.
+if [ x${enable_multilib} = x ]; then
+ targargs="--enable-multilib ${targargs}"
+fi
+
targargs="--host=${target_alias} ${targargs}"
sed -e "s:^TARGET_CONFIGDIRS[ ]*=.*$:TARGET_CONFIGDIRS = ${target_configdirs}:" \
-e "s%^CONFIG_ARGUMENTS[ ]*=.*$%CONFIG_ARGUMENTS = ${targargs}%" \
projects / deliverable / binutils-gdb.git / blobdiff