;;
powerpc-*-aix*)
# copied from rs6000-*-* entry
- noconfigdirs="$noconfigdirs gprof target-libada target-libgloss ${libgcj}"
+ noconfigdirs="$noconfigdirs gprof target-libgloss ${libgcj}"
;;
powerpc*-*-winnt* | powerpc*-*-pe* | ppc*-*-pe)
target_configdirs="$target_configdirs target-winsup"
noconfigdirs="$noconfigdirs target-newlib gprof ${libgcj}"
;;
rs6000-*-aix*)
- noconfigdirs="$noconfigdirs gprof target-libada target-libgloss ${libgcj}"
+ noconfigdirs="$noconfigdirs gprof target-libgloss ${libgcj}"
;;
rs6000-*-*)
noconfigdirs="$noconfigdirs gprof ${libgcj}"
noconfigdirs="$noconfigdirs ld binutils gprof target-libgloss ${libgcj}"
;;
mips*-*-irix5*)
- # The GNU linker does not support shared libraries.
- noconfigdirs="$noconfigdirs ld gprof target-libgloss ${libgcj}"
+ noconfigdirs="$noconfigdirs gprof target-libgloss ${libgcj}"
;;
mips*-*-irix6*)
# Linking libjava exceeds command-line length limits on at least
fi
ACX_PROG_GNAT
+ACX_PROG_CMP_IGNORE_INITIAL
+
+# By default, C is the only stage 1 language.
+stage1_languages=c
+AC_SUBST(stage1_languages)
# Figure out what language subdirectories are present.
# Look if the user specified --enable-languages="..."; if not, use
${srcdir}/gcc/[[*]]/config-lang.in) ;;
*)
# From the config-lang.in, get $language, $target_libs,
- # $lang_dirs, and $build_by_default
+ # $lang_dirs, $boot_language, and $build_by_default
language=
target_libs=
lang_dirs=
+ boot_language=
build_by_default=
. ${lang_frag}
# This is quite sensitive to the ordering of the case statement arms.
case $add_this_lang in
no)
# Remove language-dependent dirs.
- eval noconfigdirs='"$noconfigdirs "'\"$target_libs $lang_dirs\" ;;
+ eval noconfigdirs='"$noconfigdirs "'\"$target_libs $lang_dirs\"
+ ;;
*)
new_enable_languages="$new_enable_languages,$language"
- missing_languages="`echo "$missing_languages" | sed "s/,$language,/,/"`" ;;
+ missing_languages=`echo "$missing_languages" | sed "s/,$language,/,/"`
+ case ${boot_language} in
+ yes)
+ # Add to (comma-separated) list of stage 1 languages.
+ stage1_languages="${stage1_languages},${language}"
+ ;;
+ esac
+ ;;
esac
;;
esac
done
- missing_languages="`echo "$missing_languages" | sed -e s/^,// -e s/,$//`"
+ missing_languages=`echo "$missing_languages" | sed -e "s/^,//" -e "s/,$//"`
if test "x$missing_languages" != x; then
AC_MSG_ERROR([
The following requested languages were not found: ${missing_languages}])
echo The following languages will be built: ${new_enable_languages}
fi
enable_languages="$new_enable_languages"
- ac_configure_args="`echo " $ac_configure_args" | sed -e 's/ --enable-languages=[[^ ]]*//' -e 's/$/ --enable-languages='"$enable_languages"/ `"
+ ac_configure_args=`echo " $ac_configure_args" | sed -e 's/ --enable-languages=[[^ ]]*//' -e 's/$/ --enable-languages='"$enable_languages"/ `
fi
# Remove the entries in $skipdirs and $noconfigdirs from $configdirs and
tooldir='${exec_prefix}'/${target_alias}
build_tooldir=${tooldir}
-# Generate a default definition for YACC. This is used if the makefile can't
-# locate bison or byacc in objdir.
-
-for prog in 'bison -y' byacc yacc
-do
- set dummy $prog; tmp=$2
- IFS="${IFS= }"; save_ifs="$IFS"; IFS="${IFS}:"
- for dir in $PATH; do
- test -z "$dir" && dir=.
- if test -f $dir/$tmp; then
- DEFAULT_YACC="$prog"
- break
- fi
- done
- IFS="$save_ifs"
-
- test -n "$DEFAULT_YACC" && break
-done
-
-# Generate a default definition for M4. This is used if the makefile can't
-# locate m4 in objdir.
-
-for prog in gm4 gnum4 m4
-do
- set dummy $prog; tmp=$2
- IFS="${IFS= }"; save_ifs="$IFS"; IFS="${IFS}:"
- for dir in $PATH; do
- test -z "$dir" && dir=.
- if test -f $dir/$tmp; then
- DEFAULT_M4="$prog"
- break
- fi
- done
- IFS="$save_ifs"
-
- test -n "$DEFAULT_M4" && break
-done
-
-# Generate a default definition for LEX. This is used if the makefile can't
-# locate flex in objdir.
-
-for prog in flex lex
-do
- set dummy $prog; tmp=$2
- IFS="${IFS= }"; save_ifs="$IFS"; IFS="${IFS}:"
- for dir in $PATH; do
- test -z "$dir" && dir=.
- if test -f $dir/$tmp; then
- DEFAULT_LEX="$prog"
- break
- fi
- done
- IFS="$save_ifs"
-
- test -n "$DEFAULT_LEX" && break
-done
-
-# FIXME Should this be done recursively ??? (Useful for e.g. gdbtest)
-# Set up the list of links to be made.
-# ${links} is the list of link names, and ${files} is the list of names to link to.
-
-# Make the links.
-configlinks="${links}"
-if test -r ./config.status ; then
- mv -f ./config.status ./config.back
-fi
-while test -n "${files}" ; do
- # set file to car of files, files to cdr of files
- set ${files}; file=$1; shift; files=$*
- set ${links}; link=$1; shift; links=$*
-
- if test ! -r ${srcdir}/${file} ; then
- if test ! -r ${file} ; then
- echo '***' "${progname}: cannot create a link \"${link}\"," 1>&2
- echo '***' "since the file \"${srcdir}/${file}\" does not exist." 1>&2
- exit 1
- else
- srcfile=${file}
- fi
- else
- srcfile=${srcdir}/${file}
- fi
-
- ${remove} -f ${link}
- # Make a symlink if possible, otherwise try a hard link
- if ${symbolic_link} ${srcfile} ${link} >/dev/null 2>&1 ; then
- true
- else
- # We need to re-remove the file because Lynx leaves a
- # very strange directory there when it fails an NFS symlink.
- ${remove} -r -f ${link}
- ${hard_link} ${srcfile} ${link}
- fi
- if test ! -r ${link} ; then
- echo '***' "${progname}: unable to link \"${link}\" to \"${srcfile}\"." 1>&2
- exit 1
- fi
-
- echo "Linked \"${link}\" to \"${srcfile}\"."
-done
+# Generate default definitions for YACC, M4, LEX. These are used if the
+# Makefile can't locate these programs in objdir.
+MISSING=`cd $ac_aux_dir && ${PWDCMD-pwd}`/missing
+AC_CHECK_PROGS([DEFAULT_YACC], ['bison -y' byacc yacc], [$MISSING bison])
+AC_CHECK_PROGS([DEFAULT_M4], [gm4 gnum4 m4], [$MISSING m4])
+AC_CHECK_PROGS([DEFAULT_LEX], [flex lex], [$MISSING flex])
# Create a .gdbinit file which runs the one in srcdir
# and tells GDB to look there for source files.
# at the end of the argument list.
# These will be expanded by make, so quote '$'.
cat <<\EOF_SED > conftestsed
-s/ --no[[^ ]]* / /
-s/ --c[[a-z-]]*[[= ]][[^ ]]* / /
-s/ --sr[[a-z-]]*[[= ]][[^ ]]* / /
-s/ --ho[[a-z-]]*[[= ]][[^ ]]* / /
-s/ --bu[[a-z-]]*[[= ]][[^ ]]* / /
-s/ --t[[a-z-]]*[[= ]][[^ ]]* / /
-s/ --program-[[pst]][[a-z-]]*[[= ]][[^ ]]* / /
-s/ -cache-file[[= ]][[^ ]]* / /
-s/ -srcdir[[= ]][[^ ]]* / /
-s/ -host[[= ]][[^ ]]* / /
-s/ -build[[= ]][[^ ]]* / /
-s/ -target[[= ]][[^ ]]* / /
-s/ -program-prefix[[= ]][[^ ]]* / /
-s/ -program-suffix[[= ]][[^ ]]* / /
-s/ -program-transform-name[[= ]][[^ ]]* / /
+s/ --no[[^ ]]*/ /g
+s/ --c[[a-z-]]*[[= ]][[^ ]]*//g
+s/ --sr[[a-z-]]*[[= ]][[^ ]]*//g
+s/ --ho[[a-z-]]*[[= ]][[^ ]]*//g
+s/ --bu[[a-z-]]*[[= ]][[^ ]]*//g
+s/ --t[[a-z-]]*[[= ]][[^ ]]*//g
+s/ --program-[[pst]][[a-z-]]*[[= ]][[^ ]]*//g
+s/ -cache-file[[= ]][[^ ]]*//g
+s/ -srcdir[[= ]][[^ ]]*//g
+s/ -host[[= ]][[^ ]]*//g
+s/ -build[[= ]][[^ ]]*//g
+s/ -target[[= ]][[^ ]]*//g
+s/ -program-prefix[[= ]][[^ ]]*//g
+s/ -program-suffix[[= ]][[^ ]]*//g
+s/ -program-transform-name[[= ]][[^ ]]*//g
s/ [[^' -][^ ]*] / /
s/^ *//;s/ *$//
s,\$,$$,g
AC_SUBST(RPATH_ENVVAR)
AC_SUBST(BUILD_PREFIX)
AC_SUBST(BUILD_PREFIX_1)
-AC_SUBST(configlinks)
AC_SUBST(gcc_version_trigger)
AC_SUBST(gcc_version)
AC_SUBST(tooldir)
AC_SUBST(DEFAULT_M4)
# Target tools.
-NCN_STRICT_CHECK_TARGET_TOOL(AR_FOR_TARGET, ar)
-NCN_STRICT_CHECK_TARGET_TOOL(AS_FOR_TARGET, as)
-NCN_STRICT_CHECK_TARGET_TOOL(DLLTOOL_FOR_TARGET, dlltool)
-NCN_STRICT_CHECK_TARGET_TOOL(LD_FOR_TARGET, ld)
-NCN_STRICT_CHECK_TARGET_TOOL(NM_FOR_TARGET, nm)
-NCN_STRICT_CHECK_TARGET_TOOL(RANLIB_FOR_TARGET, ranlib, :)
-NCN_STRICT_CHECK_TARGET_TOOL(WINDRES_FOR_TARGET, windres)
+NCN_STRICT_CHECK_TARGET_TOOL(CONFIGURED_AR_FOR_TARGET, ar)
+NCN_STRICT_CHECK_TARGET_TOOL(CONFIGURED_AS_FOR_TARGET, as)
+NCN_STRICT_CHECK_TARGET_TOOL(CONFIGURED_DLLTOOL_FOR_TARGET, dlltool)
+NCN_STRICT_CHECK_TARGET_TOOL(CONFIGURED_LD_FOR_TARGET, ld)
+NCN_STRICT_CHECK_TARGET_TOOL(CONFIGURED_NM_FOR_TARGET, nm)
+NCN_STRICT_CHECK_TARGET_TOOL(CONFIGURED_RANLIB_FOR_TARGET, ranlib, :)
+NCN_STRICT_CHECK_TARGET_TOOL(CONFIGURED_WINDRES_FOR_TARGET, windres)
AC_SUBST(GCC_FOR_TARGET)
AC_SUBST(FLAGS_FOR_TARGET)
NM_FOR_TARGET="\$(USUAL_NM_FOR_TARGET)"
RANLIB_FOR_TARGET="\$(USUAL_RANLIB_FOR_TARGET)"
WINDRES_FOR_TARGET="\$(USUAL_WINDRES_FOR_TARGET)"
+else
+ # Just use the ones we found.
+ AR_FOR_TARGET="\$(CONFIGURED_AR_FOR_TARGET)"
+ AS_FOR_TARGET="\$(CONFIGURED_AS_FOR_TARGET)"
+ DLLTOOL_FOR_TARGET="\$(CONFIGURED_DLLTOOL_FOR_TARGET)"
+ LD_FOR_TARGET="\$(CONFIGURED_LD_FOR_TARGET)"
+ NM_FOR_TARGET="\$(CONFIGURED_NM_FOR_TARGET)"
+ RANLIB_FOR_TARGET="\$(CONFIGURED_RANLIB_FOR_TARGET)"
+ WINDRES_FOR_TARGET="\$(CONFIGURED_WINDRES_FOR_TARGET)"
fi
+AC_SUBST(AR_FOR_TARGET)
+AC_SUBST(AS_FOR_TARGET)
+AC_SUBST(DLLTOOL_FOR_TARGET)
+AC_SUBST(LD_FOR_TARGET)
+AC_SUBST(NM_FOR_TARGET)
+AC_SUBST(RANLIB_FOR_TARGET)
+AC_SUBST(WINDRES_FOR_TARGET)
+
# Certain tools may need extra flags.
AR_FOR_TARGET=${AR_FOR_TARGET}${extra_arflags_for_target}
RANLIB_FOR_TARGET=${RANLIB_FOR_TARGET}${extra_ranlibflags_for_target}
MAINT=$MAINTAINER_MODE_TRUE
AC_SUBST(MAINT)dnl
+# ---------------------
+# GCC bootstrap support
+# ---------------------
+
+# Stage specific cflags for build.
+stage1_cflags="-g"
+case $build in
+ vax-*-*)
+ case ${GCC} in
+ yes) stage1_cflags="-g -Wa,-J" ;;
+ *) stage1_cflags="-g -J" ;;
+ esac ;;
+ powerpc-*-darwin*)
+ # The spiffy cpp-precomp chokes on some legitimate constructs in GCC
+ # sources; use -no-cpp-precomp to get to GNU cpp.
+ # Apple's GCC has bugs in designated initializer handling, so disable
+ # that too.
+ stage1_cflags="-g -no-cpp-precomp -DHAVE_DESIGNATED_INITIALIZERS=0"
+ ;;
+esac
+AC_SUBST(stage1_cflags)
+
+# Enable -Werror in bootstrap stage2 and later.
+# Change the default to "no" on release branches.
+AC_ARG_ENABLE(werror,
+[ --enable-werror enable -Werror in bootstrap stage2 and later], [],
+[enable_werror=yes])
+case ${enable_werror} in
+ yes) stage2_werror_flag="--enable-werror-always" ;;
+ *) stage2_werror_flag="" ;;
+esac
+AC_SUBST(stage2_werror_flag)
+
AC_OUTPUT(Makefile)