## For more information on these two systems, check out the documentation
## for 'Autoconf' (autoconf.texi) and 'Configure' (configure.texi).
-# Copyright (C) 1992, 93, 94, 95, 96, 97, 1998, 1999 Free Software Foundation, Inc.
+# Copyright (C) 1992-99, 2000 Free Software Foundation, Inc.
#
# This file is free software; you can redistribute it and/or modify it
# under the terms of the GNU General Public License as published by
host_libs="${host_libs} libgui"
fi
+# Set up configure/Makefile variables if libstdc++-v3 is to be built.
+if [ "${enable_libstdcxx_v3}" = "yes" ] && test -d $srcdir/libstdc++-v3; then
+ libstdcxx_version="target-libstdc++-v3"
+ # Don't use libstdc++-v3's flags to configure/build itself.
+ libstdcxx_flags='`case $$dir in libstdc++-v3) ;; *) cat $$r/$(TARGET_SUBDIR)/libstdc++-v3/src/libstdc++.INC 2>/dev/null || : ;; esac` -L$$r/$(TARGET_SUBDIR)/libstd++-v3/src -L$$r/$(TARGET_SUBDIR)/libstd++-v3/src/.libs'
+else
+ libstdcxx_version="target-libio target-libstdc++"
+ libstdcxx_flags='-isystem $$s/libstdc++ -isystem $$s/libstdc++/std -isystem $$s/libstdc++/stl -isystem $$s/libio/ -isystem $$s/libio/stdio -L$$r/$(TARGET_SUBDIR)/libstdc++'
+fi
+
# these tools are built for the host environment
# Note, the powerpc-eabi build depends on sim occurring before gdb in order to
# know that we are building the simulator.
-host_tools="texinfo byacc flex bison binutils ld gas gcc sim gdb make patch prms send-pr gprof gdbtest tgas etc expect dejagnu ash bash bzip2 m4 autoconf automake libtool ispell grep diff rcs cvssrc fileutils shellutils time textutils wdiff find emacs emacs19 uudecode hello tar gzip indent recode release sed utils guile perl apache inet gawk findutils snavigator libtool gettext zip"
+host_tools="texinfo byacc flex bison binutils ld gas gcc cgen sim gdb make patch prms send-pr gprof gdbtest tgas etc expect dejagnu ash bash bzip2 m4 autoconf automake libtool ispell grep diff rcs cvssrc fileutils shellutils time textutils wdiff find emacs emacs19 uudecode hello tar gzip indent recode release sed utils guile perl apache inet gawk findutils snavigator libtool gettext zip"
# these libraries are built for the target environment, and are built after
# the host libraries and the host tools (which may be a cross compiler)
target_libs="target-libiberty \
target-libgloss \
target-newlib \
- target-libio \
- target-librx \
- target-libstdc++ \
- target-libg++"
+ ${libstdcxx_version} \
+ target-libf2c \
+ target-libchill \
+ target-libffi \
+ target-libjava \
+ target-zlib \
+ target-boehm-gc \
+ target-qthreads \
+ target-libobjc"
# these tools are built using the target libs, and are intended to run only
# in the target environment
mips*-*-sysv*)
host_makefile_frag="${host_makefile_frag} config/mh-riscos"
;;
+ i370-ibm-opened*)
+ host_makefile_frag="${host_makefile_frag} config/mh-openedition"
+ ;;
i[3456]86-*-sysv5*)
host_makefile_frag="${host_makefile_frag} config/mh-sysv5"
;;
*-*-lynxos*)
host_makefile_frag="${host_makefile_frag} config/mh-lynxos"
;;
- *-*-aix4.[3456789]* | *-*-aix[56789].*)
- host_makefile_frag="${host_makefile_frag} config/mh-aix43"
- ;;
*-*-sysv4*)
host_makefile_frag="${host_makefile_frag} config/mh-sysv4"
;;
i[3456]86-*-*)
host_makefile_frag="${host_makefile_frag} config/mh-x86pic"
;;
+ i370-*-*)
+ host_makefile_frag="${host_makefile_frag} config/mh-i370pic"
+ ;;
+ ia64-*-*)
+ host_makefile_frag="${host_makefile_frag} config/mh-ia64pic"
+ ;;
sparc64-*-*)
host_makefile_frag="${host_makefile_frag} config/mh-sparcpic"
;;
powerpc-*-netware*)
target_makefile_frag="${target_makefile_frag} config/mt-netware"
;;
- *-*-linux-gnu)
+ *-*-linux-gnu*)
target_makefile_frag="${target_makefile_frag} config/mt-linux"
;;
+ *-*-aix4.[3456789]* | *-*-aix[56789].*)
+ target_makefile_frag="${target_makefile_frag} config/mt-aix43"
+ ;;
+ mips*-*-pe | sh*-*-pe | *arm-wince-pe)
+ target_makefile_frag="${target_makefile_frag} config/mt-wince"
+ ;;
esac
# If --enable-target-optspace always use -Os instead of -O2 to build
yes:*)
target_makefile_frag="${target_makefile_frag} config/mt-ospace"
;;
- # CYGNUS LOCAL d10v, d30v, fr30
:d30v-*)
target_makefile_frag="${target_makefile_frag} config/mt-d30v"
;;
noconfigdirs="tcl expect dejagnu make texinfo bison patch flex byacc send-pr gprof uudecode dejagnu diff guile perl apache inet itcl tix db snavigator gnuserv gettext"
;;
i[3456]86-*-go32* | i[3456]86-*-msdosdjgpp*)
- noconfigdirs="tcl tk expect dejagnu make texinfo bison patch flex byacc send-pr uudecode dejagnu diff guile perl apache inet itcl tix db snavigator gnuserv gettext"
+ noconfigdirs="tcl tk expect dejagnu make texinfo bison patch flex byacc send-pr uudecode dejagnu diff guile perl apache inet itcl tix db snavigator gnuserv gettext libffi"
;;
i[3456]86-*-mingw32*)
# noconfigdirs="tcl tk expect dejagnu make texinfo bison patch flex byacc send-pr uudecode dejagnu diff guile perl apache inet itcl tix db snavigator gnuserv"
ppc*-*-pe)
noconfigdirs="patch diff make tk tcl expect dejagnu cvssrc autoconf automake texinfo bison send-pr gprof rcs guile perl apache inet itcl tix db snavigator gnuserv"
;;
+ powerpc-*-beos*)
+ noconfigdirs="$noconfigdirs tk itcl tix libgui gdb dejagnu readline"
+ ;;
esac
case "${target}" in
*-*-netware)
- noconfigdirs="$noconfigdirs target-libg++ target-libstdc++ target-librx target-newlib target-libiberty target-libgloss"
+ noconfigdirs="$noconfigdirs ${libstdcxx_version} target-newlib target-libiberty target-libgloss target-libffi"
;;
*-*-rtems*)
- noconfigdirs="$noconfigdirs target-libgloss"
+ noconfigdirs="$noconfigdirs target-libgloss target-libffi"
;;
*-*-vxworks*)
- noconfigdirs="$noconfigdirs target-newlib target-libgloss"
+ noconfigdirs="$noconfigdirs target-newlib target-libgloss target-libffi"
;;
alpha*-dec-osf*)
# ld works, but does not support shared libraries. emacs doesn't
noconfigdirs="$noconfigdirs gas ld emacs fileutils target-newlib target-libgloss"
;;
alpha*-*-*vms*)
- noconfigdirs="$noconfigdirs gdb ld target-newlib target-libgloss"
- ;;
- alpha*-*-linux*)
- # newlib is not 64 bit ready
- noconfigdirs="$noconfigdirs target-newlib target-libgloss"
- # linux has rx in libc
- skipdirs="$skipdirs target-librx"
+ noconfigdirs="$noconfigdirs gdb ld target-newlib target-libgloss target-libffi"
;;
alpha*-*-*)
# newlib is not 64 bit ready
noconfigdirs="$noconfigdirs target-newlib target-libgloss"
;;
+ sh*-*-pe|mips*-*-pe|*arm-wince-pe)
+ noconfigdirs="$noconfigdirs target-libjava target-libffi target-zlib"
+ noconfigdirs="$noconfigdirs target-boehm-gc target-qthreads target-examples"
+ noconfigdirs="$noconfigdirs target-libiberty texinfo send-pr"
+ noconfigdirs="$noconfigdirs tcl tix tk itcl libgui sim"
+ noconfigdirs="$noconfigdirs expect dejagnu"
+ # the C++ libraries don't build on top of CE's C libraries
+ noconfigdirs="$noconfigdirs ${libstdcxx_version}"
+ skipdirs="$skipdirs target-newlib"
+ case "${host}" in
+ *-*-cygwin*) ;; # keep gdb and readline
+ *) noconfigdirs="$noconfigdirs gdb readline ${libstdcxx_version}"
+ ;;
+ esac
+ ;;
arc-*-*)
- noconfigdirs="$noconfigdirs target-libgloss"
+ noconfigdirs="$noconfigdirs target-libgloss target-libffi"
;;
arm-*-pe*)
noconfigdirs="$noconfigdirs target-libgloss"
fi
;;
arm-*-oabi*)
- noconfigdirs="$noconfigdirs target-libgloss"
+ noconfigdirs="$noconfigdirs target-libgloss target-libffi"
;;
c4x-*-*)
- noconfigdirs="$noconfigdirs target-libg++ target-libstdc++ target-libio target-librx target-libgloss"
+ noconfigdirs="$noconfigdirs ${libstdcxx_version} target-libgloss target-libffi"
+ ;;
+ c54x*-*-* | tic54x-*-*)
+ noconfigdirs="$noconfigdirs ${libstdcxx_version} target-libgloss target-libffi gcc gdb newlib"
;;
thumb-*-coff)
- noconfigdirs="$noconfigdirs target-libgloss"
+ noconfigdirs="$noconfigdirs target-libgloss target-libffi"
;;
-# CYGNUS LOCAL clm/arm-elf
thumb-*-elf)
- noconfigdirs="$noconfigdirs target-libgloss"
+ noconfigdirs="$noconfigdirs target-libgloss target-libffi"
;;
thumb-*-oabi)
- noconfigdirs="$noconfigdirs target-libgloss"
+ noconfigdirs="$noconfigdirs target-libgloss target-libffi"
;;
-# END CYGNUS LOCAL
-# CYGNUS LOCAL nickc/strongarm
strongarm-*-elf)
- noconfigdirs="$noconfigdirs target-libgloss"
+ noconfigdirs="$noconfigdirs target-libgloss target-libffi"
if [ x${is_cross_compiler} != xno ] ; then
target_configdirs="${target_configdirs} target-bsp target-cygmon"
fi
;;
strongarm-*-coff)
- noconfigdirs="$noconfigdirs target-libgloss"
+ noconfigdirs="$noconfigdirs target-libgloss target-libffi"
if [ x${is_cross_compiler} != xno ] ; then
target_configdirs="${target_configdirs} target-bsp target-cygmon"
fi
;;
-# END CYGNUS LOCAL
- thumb-*-pe) # CYGNUS LOCAL nickc/thumb
- noconfigdirs="$noconfigdirs target-libgloss"
+ thumb-*-pe)
+ noconfigdirs="$noconfigdirs target-libgloss target-libffi"
;;
arm-*-riscix*)
- noconfigdirs="$noconfigdirs ld target-libgloss"
+ noconfigdirs="$noconfigdirs ld target-libgloss target-libffi"
;;
d10v-*-*)
- noconfigdirs="$noconfigdirs target-librx target-libg++ target-libstdc++ target-libio"
+ noconfigdirs="$noconfigdirs ${libstdcxx_version} target-libgloss target-libffi"
;;
-# CYGNUS LOCAL d30v
d30v-*-*)
;;
-# END CYGNUS LOCAL
-# CYGNUS LOCAL fr30
fr30-*-elf*)
if [ x${is_cross_compiler} != xno ] ; then
target_configdirs="${target_configdirs} target-bsp target-libstub target-cygmon"
fi
;;
-# END CYGNUS LOCAL
h8300*-*-* | \
h8500-*-*)
- noconfigdirs="$noconfigdirs target-libg++ target-libstdc++ target-libio target-librx target-libgloss"
+ noconfigdirs="$noconfigdirs ${libstdcxx_version} target-libgloss target-libffi"
;;
hppa*-*-*elf* | \
hppa*-*-linux-gnu* | \
- hppa*-*-lites*)
- # Do configure ld/binutils/gas for the above cases.
+ hppa*-*-lites* | \
+ hppa*64*-*-*)
+ # Do configure ld/binutils/gas for this case.
;;
hppa*-*-*)
# HP's C compiler doesn't handle Emacs correctly (but on BSD and Mach
esac
noconfigdirs="$noconfigdirs ld shellutils"
;;
+ ia64*-*-elf*)
+ # No gdb support yet.
+ noconfigdirs="$noconfigdirs tix readline mmalloc libgui itcl gdb"
+ ;;
i[3456]86-*-coff | i[3456]86-*-elf)
if [ x${is_cross_compiler} != xno ] ; then
target_configdirs="${target_configdirs} target-libstub target-cygmon"
;;
i[3456]86-*-go32* | i[3456]-*-msdosdjgpp*)
# but don't build gdb
- noconfigdirs="$noconfigdirs gdb target-libg++ target-libstdc++ target-libio target-librx"
- ;;
- *-*-linux*)
- # linux has rx in libc
- skipdirs="$skipdirs target-librx"
+ noconfigdirs="$noconfigdirs gdb ${libstdcxx_version} target-libffi"
;;
i[3456]86-*-mingw32*)
target_configdirs="$target_configdirs target-mingw"
- noconfigdirs="$noconfigdirs expect target-libgloss"
+ noconfigdirs="$noconfigdirs expect target-libgloss target-libffi"
# Can't build gdb for mingw32 if not native.
case "${host}" in
;;
*-*-cygwin*)
target_configdirs="$target_configdirs target-libtermcap target-winsup"
- noconfigdirs="$noconfigdirs target-libgloss"
+ noconfigdirs="$noconfigdirs target-gperf target-libgloss target-libffi"
# always build newlib.
skipdirs=`echo " ${skipdirs} " | sed -e 's/ target-newlib / /'`
esac
;;
i[3456]86-*-pe)
- noconfigdirs="$noconfigdirs target-libg++ target-libstdc++ target-libio target-librx target-libgloss"
+ noconfigdirs="$noconfigdirs ${libstdcxx_version} target-libgloss target-libffi"
;;
i[3456]86-*-sco3.2v5*)
# The linker does not yet know about weak symbols in COFF,
# and is not configured to handle mixed ELF and COFF.
- noconfigdirs="$noconfigdirs ld target-libgloss"
+ noconfigdirs="$noconfigdirs ld target-libgloss target-libffi"
;;
i[3456]86-*-sco*)
- noconfigdirs="$noconfigdirs gprof target-libgloss"
+ noconfigdirs="$noconfigdirs gprof target-libgloss target-libffi"
;;
i[3456]86-*-solaris2*)
noconfigdirs="$noconfigdirs target-libgloss"
*) ;;
esac
# but that's okay since emacs doesn't work anyway
- noconfigdirs="$noconfigdirs emacs emacs19 target-libgloss"
+ noconfigdirs="$noconfigdirs emacs emacs19 target-libgloss target-libffi"
;;
i[3456]86-*-beos*)
noconfigdirs="$noconfigdirs gdb target-newlib target-libgloss"
fi
;;
mn10200-*-*)
- noconfigdirs="$noconfigdirs"
+ noconfigdirs="$noconfigdirs target-libffi"
if [ x${is_cross_compiler} != xno ] ; then
target_configdirs="${target_configdirs} target-libstub target-cygmon"
fi
;;
mn10300-*-*)
- noconfigdirs="$noconfigdirs"
+ noconfigdirs="$noconfigdirs target-libffi"
if [ x${is_cross_compiler} != xno ] ; then
target_configdirs="${target_configdirs} target-bsp target-libstub target-cygmon"
fi
;;
powerpc-*-aix*)
# copied from rs6000-*-* entry
- noconfigdirs="$noconfigdirs gprof cvssrc target-libgloss"
- # This is needed until gcc and ld are fixed to work together.
+ # The configure and build of ld are currently disabled because
+ # GNU ld is known to be broken for AIX 4.2 and 4.3 (at least)
+ # The symptom is that GDBtk 4.18 fails at startup with a segfault
+ # if linked by GNU ld, but not if linked by the native ld.
+ noconfigdirs="$noconfigdirs gprof cvssrc target-libgloss target-libffi ld"
use_gnu_ld=no
;;
powerpc*-*-winnt* | powerpc*-*-pe* | ppc*-*-pe)
target_configdirs="$target_configdirs target-winsup"
- noconfigdirs="$noconfigdirs gdb tcl tk make expect target-libgloss itcl tix db snavigator gnuserv"
+ noconfigdirs="$noconfigdirs gdb tcl tk make expect target-libgloss itcl tix db snavigator gnuserv target-libffi"
# always build newlib.
skipdirs=`echo " ${skipdirs} " | sed -e 's/ target-newlib / /'`
;;
# This is temporary until we can link against shared libraries
powerpcle-*-solaris*)
- noconfigdirs="$noconfigdirs gdb sim make tcl tk expect itcl tix db snavigator gnuserv"
+ noconfigdirs="$noconfigdirs gdb sim make tcl tk expect itcl tix db snavigator gnuserv target-libffi"
+ ;;
+ powerpc-*-beos*)
+ noconfigdirs="$noconfigdirs gdb target-newlib target-libgloss"
;;
powerpc-*-eabi)
if [ x${is_cross_compiler} != xno ] ; then
;;
rs6000-*-lynxos*)
# The CVS server code doesn't work on the RS/6000
- # Newlib makes problems for libg++ in crosses.
- noconfigdirs="$noconfigdirs target-newlib gprof cvssrc"
+ noconfigdirs="$noconfigdirs target-newlib gprof cvssrc target-libffi"
;;
rs6000-*-aix*)
- noconfigdirs="$noconfigdirs gprof"
- # This is needed until gcc and ld are fixed to work together.
+ # The configure and build of ld are currently disabled because
+ # GNU ld is known to be broken for AIX 4.2 and 4.3 (at least)
+ # The symptom is that GDBtk 4.18 fails at startup with a segfault
+ # if linked by GNU ld, but not if linked by the native ld.
+ noconfigdirs="$noconfigdirs gprof target-libffi ld"
use_gnu_ld=no
;;
rs6000-*-*)
- noconfigdirs="$noconfigdirs gprof"
+ noconfigdirs="$noconfigdirs gprof target-libffi"
;;
m68k-apollo-*)
- noconfigdirs="$noconfigdirs ld binutils gprof target-libgloss"
+ noconfigdirs="$noconfigdirs ld binutils gprof target-libgloss target-libffi"
;;
mips*-*-irix5*)
# The GNU linker does not support shared libraries.
noconfigdirs="$noconfigdirs gas gprof emacs target-libgloss"
;;
mips*-dec-bsd*)
- noconfigdirs="$noconfigdirs gprof target-libgloss"
+ noconfigdirs="$noconfigdirs gprof target-libgloss target-libffi"
;;
mips*-*-bsd*)
- noconfigdirs="$noconfigdirs gprof target-libgloss"
+ noconfigdirs="$noconfigdirs gprof target-libgloss target-libffi"
;;
mipstx39-*-*)
- noconfigdirs="$noconfigdirs gprof" # same as generic mips
+ noconfigdirs="$noconfigdirs gprof target-libffi" # same as generic mips
target_configdirs="${target_configdirs} target-bsp target-libstub target-cygmon"
;;
mips*-*-*)
- noconfigdirs="$noconfigdirs gprof"
+ noconfigdirs="$noconfigdirs gprof target-libffi"
;;
romp-*-*)
- noconfigdirs="$noconfigdirs bfd binutils ld gas opcodes target-libgloss"
+ noconfigdirs="$noconfigdirs bfd binutils ld gas opcodes target-libgloss target-libffi"
;;
sh-*-*)
case "${host}" in
i[3456]86-*-msdosdjgpp*) ;; # don't add gprof back in
*) skipdirs=`echo " ${skipdirs} " | sed -e 's/ gprof / /'` ;;
esac
- noconfigdirs="$noconfigdirs target-libgloss"
+ noconfigdirs="$noconfigdirs target-libgloss target-libffi"
;;
sparc-*-elf*)
if [ x${is_cross_compiler} != xno ] ; then
if [ x${is_cross_compiler} != xno ] ; then
target_configdirs="${target_configdirs} target-libstub target-cygmon"
fi
+ noconfigdirs="target-libffi"
;;
sparclite-*-*)
if [ x${is_cross_compiler} != xno ] ; then
target_configdirs="${target_configdirs} target-bsp target-libstub target-cygmon"
fi
+ noconfigdirs="target-libffi"
;;
sparc-*-sunos4*)
if [ x${is_cross_compiler} != xno ] ; then
fi
;;
v810-*-*)
- noconfigdirs="$noconfigdirs bfd binutils gas gcc gdb ld target-libio target-libg++ target-libstdc++ opcodes target-libgloss"
+ noconfigdirs="$noconfigdirs bfd binutils gas gcc gdb ld ${libstdcxx_version} opcodes target-libgloss target-libffi"
;;
v850-*-*)
- noconfigdirs="$noconfigdirs target-libgloss"
+ noconfigdirs="$noconfigdirs target-libgloss target-libffi"
;;
- v850e-*-*) # CYGNUS LOCAL v850e
- noconfigdirs="$noconfigdirs target-libgloss"
+ v850e-*-*)
+ noconfigdirs="$noconfigdirs target-libgloss target-libffi"
;;
v850ea-*-*)
- noconfigdirs="$noconfigdirs target-libgloss"
- ;; # END CYGNUS LOCAL
+ noconfigdirs="$noconfigdirs target-libgloss target-libffi"
+ ;;
vax-*-vms)
- noconfigdirs="$noconfigdirs bfd binutils gdb ld target-newlib opcodes target-libgloss"
+ noconfigdirs="$noconfigdirs bfd binutils gdb ld target-newlib opcodes target-libgloss target-libffi"
;;
vax-*-*)
- noconfigdirs="$noconfigdirs target-newlib target-libgloss"
+ noconfigdirs="$noconfigdirs target-newlib target-libgloss target-libffi"
;;
*-*-lynxos*)
- # Newlib makes problems for libg++ in crosses.
- noconfigdirs="$noconfigdirs target-newlib target-libgloss"
+ noconfigdirs="$noconfigdirs target-newlib target-libgloss target-libffi"
;;
*-*-macos* | \
*-*-mpw*)
# Macs want a resource compiler.
configdirs="$configdirs grez"
+ noconfigdirs="target-libffi"
;;
esac
*target-newlib*) noconfigdirs="$noconfigdirs target-libgloss" ;;
esac
+# Only configure cgen if --enable-cgen-maint.
+if [ "x$enable_cgen_maint" != xyes ] ; then
+ noconfigdirs="$noconfigdirs cgen"
+fi
+
# Make sure we don't let GNU ld be added if we didn't want it.
if [ x$with_gnu_ld = xno ]; then
use_gnu_ld=no
i[3456]86-*)
target_makefile_frag="${target_makefile_frag} config/mt-x86pic"
;;
+ ia64-*)
+ target_makefile_frag="${target_makefile_frag} config/mt-ia64pic"
+ ;;
+ powerpc*-*-aix*)
+ # We don't want -fPIC on AIX.
+ ;;
powerpc*-*)
target_makefile_frag="${target_makefile_frag} config/mt-ppcpic"
;;
# provide a proper gxx_include_dir.
# Note, if you change the default, make sure to fix both here and in
-# the gcc, libio, libstdc++ and libg++ subdirectories.
+# the gcc, libio, and libstdc++ subdirectories.
# Check whether --with-gxx-include-dir or --without-gxx-include-dir was given.
gxx_include_dir=
if test -n "${with_gxx_include_dir}"; then
gxx_include_dir=${gxx_include_dir}
fi
-targargs="--host=${target_alias} --build=${build_alias} ${targargs}"
+FLAGS_FOR_TARGET=
+case " $skipdirs " in
+*" target-newlib "*) ;;
+*)
+ case "$target" in
+ *-cygwin*)
+ FLAGS_FOR_TARGET=$FLAGS_FOR_TARGET' -L$$r/$(TARGET_SUBDIR)/winsup -L$$r/$(TARGET_SUBDIR)/winsup/cygwin -L$$r/$(TARGET_SUBDIR)/winsup/w32api/lib -isystem $$s/winsup/include -isystem $$s/winsup/cygwin/include -isystem $$s/winsup/w32api/include -isystem $$s/newlib/libc/sys/cygwin -isystem $$s/newlib/libc/sys/cygwin32' ;;
+ esac
+
+ # If we're not building GCC, don't discard standard headers.
+ if test -d ${topsrcdir}/gcc; then
+ FLAGS_FOR_TARGET=$FLAGS_FOR_TARGET' -nostdinc'
+
+ if test "${build}" != "${host}"; then
+ # On Canadian crosses, CC_FOR_TARGET will have already been set
+ # by `configure', so we won't have an opportunity to add -Bgcc/
+ # to it. This is right: we don't want to search that directory
+ # for binaries, but we want the header files in there, so add
+ # them explicitly.
+ FLAGS_FOR_TARGET=$FLAGS_FOR_TARGET' -isystem $$r/gcc/include'
+
+ # Someone might think of using the pre-installed headers on
+ # Canadian crosses, in case the installed compiler is not fully
+ # compatible with the compiler being built. In this case, it
+ # would be better to flag an error than risking having
+ # incompatible object files being constructed. We can't
+ # guarantee that an error will be flagged, but let's hope the
+ # compiler will do it, when presented with incompatible header
+ # files.
+ fi
+ fi
+
+ # If we're building newlib, use its generic headers last, but search
+ # for any libc-related directories first (so make it the last -B
+ # switch).
+ FLAGS_FOR_TARGET=$FLAGS_FOR_TARGET' -B$$r/$(TARGET_SUBDIR)/newlib/ -isystem $$r/$(TARGET_SUBDIR)/newlib/targ-include -isystem $$s/newlib/libc/include'
+ ;;
+esac
+
+# On Canadian crosses, we'll be searching the right directories for
+# the previously-installed cross compiler, so don't bother to add
+# flags for directories within the install tree of the compiler
+# being built; programs in there won't even run.
+if test "${build}" = "${host}" && test -d ${topsrcdir}/gcc; then
+ # Search for pre-installed headers if nothing else fits.
+ FLAGS_FOR_TARGET=$FLAGS_FOR_TARGET' -B$(build_tooldir)/bin/ -B$(build_tooldir)/lib/ -isystem $(build_tooldir)/include'
+fi
+
+if test "x${use_gnu_ld}" = x && test "x${with_gnu_ld}" != xno &&
+ echo " ${configdirs} " | grep " ld " > /dev/null &&
+ test -d ${srcdir}/ld; then
+ # Arrange for us to find uninstalled linker scripts.
+ FLAGS_FOR_TARGET=$FLAGS_FOR_TARGET' -L$$r/ld'
+fi
+
+if test "x${CC_FOR_TARGET+set}" = xset; then
+ :
+elif test -d ${topsrcdir}/gcc; then
+ CC_FOR_TARGET='$$r/gcc/xgcc -B$$r/gcc/'
+elif test "$host" = "$target"; then
+ CC_FOR_TARGET='$(CC)'
+else
+ CC_FOR_TARGET=`echo gcc | sed -e 's/x/x/' ${program_transform_name}`
+fi
+# On Canadian crosses, configure reads CC_FOR_TARGET from Makefile,
+# if Makefile exists. Prevent $(FLAGS_FOR_TARGET) from being duplicated.
+case $CC_FOR_TARGET in
+*' $(FLAGS_FOR_TARGET)') ;;
+*) CC_FOR_TARGET=$CC_FOR_TARGET' $(FLAGS_FOR_TARGET)' ;;
+esac
+
+if test "x${CHILL_FOR_TARGET+set}" = xset; then
+ :
+elif test -d ${topsrcdir}/gcc; then
+ CHILL_FOR_TARGET='$$r/gcc/xgcc -B$$r/gcc/ -L$$r/gcc/ch/runtime/'
+elif test "$host" = "$target"; then
+ CHILL_FOR_TARGET='$(CC)'
+else
+ CHILL_FOR_TARGET=`echo gcc | sed -e 's/x/x/' ${program_transform_name}`
+fi
+case $CHILL_FOR_TARGET in
+*' $(FLAGS_FOR_TARGET)') ;;
+*) CHILL_FOR_TARGET=$CHILL_FOR_TARGET' $(FLAGS_FOR_TARGET)' ;;
+esac
+
+if test "x${CXX_FOR_TARGET+set}" = xset; then
+ :
+elif test -d ${topsrcdir}/gcc; then
+ CXX_FOR_TARGET='$$r/gcc/g++ -B$$r/gcc/ -nostdinc++ '$libstdcxx_flags
+elif test "$host" = "$target"; then
+ CXX_FOR_TARGET='$(CXX)'
+else
+ CXX_FOR_TARGET=`echo c++ | sed -e 's/x/x/' ${program_transform_name}`
+fi
+case $CXX_FOR_TARGET in
+*' $(FLAGS_FOR_TARGET)') ;;
+*) CXX_FOR_TARGET=$CXX_FOR_TARGET' $(FLAGS_FOR_TARGET)' ;;
+esac
+qCXX_FOR_TARGET=`echo "$CXX_FOR_TARGET" | sed 's,&,\\\&,g'`
+
+targargs="--cache-file=../config.cache --host=${target_alias} --build=${build_alias} ${targargs}"
sed -e "s:^TARGET_CONFIGDIRS[ ]*=.*$:TARGET_CONFIGDIRS = ${target_configdirs}:" \
-e "s%^CONFIG_ARGUMENTS[ ]*=.*$%CONFIG_ARGUMENTS = ${targargs}%" \
+ -e "s%^FLAGS_FOR_TARGET[ ]*=.*$%FLAGS_FOR_TARGET = ${FLAGS_FOR_TARGET}%" \
+ -e "s%^CC_FOR_TARGET[ ]*=.*$%CC_FOR_TARGET = ${CC_FOR_TARGET}%" \
+ -e "s%^CHILL_FOR_TARGET[ ]*=.*$%CHILL_FOR_TARGET = ${CHILL_FOR_TARGET}%" \
+ -e "s%^CXX_FOR_TARGET[ ]*=.*$%CXX_FOR_TARGET = ${qCXX_FOR_TARGET}%" \
-e "s%^TARGET_SUBDIR[ ]*=.*$%TARGET_SUBDIR = ${target_subdir}%" \
-e "s%^gxx_include_dir[ ]*=.*$%gxx_include_dir=${gxx_include_dir}%" \
Makefile > Makefile.tem
projects / deliverable / binutils-gdb.git / blobdiff