# these libraries are built for the target environment, and are built after
# the host libraries and the host tools (which may be a cross compiler)
#
-target_libs="xiberty libgloss newlib libio librx libstdc++ libg++"
+target_libs="target-libiberty target-libgloss target-newlib target-libio target-librx target-libstdc++ target-libg++"
# these tools are built using the target libs, and are intended to run only
## These two lists are of directories that are to be removed from the
## ${configdirs} list for either cross-compilations or for native-
## compilations. For example, it doesn't make that much sense to
-## cross-compile Emacs, nor is it terribly useful to compile xiberty in
+## cross-compile Emacs, nor is it terribly useful to compile target-libiberty in
## a native environment.
# directories to be built in the native environment only
# directories to be built in a cross environment only
#
-cross_only="xiberty libgloss newlib"
+cross_only="target-libiberty target-libgloss target-newlib"
## All tools belong in one of the four categories, and are assigned above
## We assign ${configdirs} this way to remove all embedded newlines. This
i[345]86-*-go32*) host_makefile_frag=config/mh-go32 ;;
i[345]86-*-win32) host_makefile_frag=config/mh-i386win32 ;;
vax-*-ultrix2*) host_makefile_frag=config/mh-vaxult2 ;;
- *-ibm-aix*) host_makefile_frag=config/mh-aix ;;
- *-bull-bosx*) host_makefile_frag=config/mh-aix ;;
*-*-solaris2*) host_makefile_frag=config/mh-solaris ;;
m68k-sun-*) host_makefile_frag=config/mh-sun3 ;;
- *-sun-*) host_makefile_frag=config/mh-sun ;;
*-hp-hpux[78]*) host_makefile_frag=config/mh-hpux8 ;;
*-hp-hpux*) host_makefile_frag=config/mh-hpux ;;
*-*-hiux*) host_makefile_frag=config/mh-hpux ;;
# See if we can extract a definition of CC from the fragment.
if [ -z "${CC}" ]; then
- if [ -n "${host_makefile_frag}" -a -f ${host_makefile_frag} ]; then
- CC=`sed -n -e 's/CC[ ]*=[ ]*\(.*\)$/\1/p' < ${host_makefile_frag}`
+ if [ -n "${host_makefile_frag}" -a -f "${srcdir}/${host_makefile_frag}" ]; then
+ xx=`sed -n -e 's/^[ ]*CC[ ]*=[ ]*\(.*\)$/\1/p' < ${srcdir}/${host_makefile_frag}`
+ if [ -n "${xx}" ] ; then
+ CC=$xx
+ fi
fi
fi
# that are in the 'cross only' list
skipdirs="${skipdirs} ${cross_only}"
is_cross_compiler=no
+ target_subdir=.
else
# similarly, don't build the targets in the 'native only'
# list when building a cross compiler
skipdirs="${skipdirs} ${native_only}"
is_cross_compiler=yes
+ target_subdir=${target_alias}
+ if [ ! -d ${target_subdir} ] ; then
+ if mkdir ${target_subdir} ; then true
+ else
+ echo "'*** could not make ${PWD=`pwd`}/${target_subdir}" 1>&2
+ exit 1
+ fi
+ fi
fi
copy_dirs=
# Recognize --with-newlib/--without-newlib.
if [ x${with_newlib} = xno ]; then
- skipdirs="${skipdirs} newlib"
+ skipdirs="${skipdirs} target-newlib"
elif [ x${with_newlib} = xyes ]; then
- skipdirs=`echo " ${skipdirs} " | sed -e 's/ newlib / /'`
+ skipdirs=`echo " ${skipdirs} " | sed -e 's/ target-newlib / /'`
fi
# Handle ${copy_dirs}
# Configure extra directories which are host specific
case "${host}" in
- i[345]86-*-go32*|i[345]86-*-win32*)
+ i[345]86-*-win32* | i[345]86-*-go32*)
configdirs="$configdirs dosrel" ;;
esac
noconfigdirs="tcl tk expect dejagnu make texinfo bison patch flex byacc send-pr gprof uudecode dejagnu diff"
;;
i[345]86-*-win32)
- noconfigdirs="tk tcl expect diff make texinfo bison flex send-pr gprof gdb readline"
+ noconfigdirs="tk tcl expect dejagnu cvs autoconf texinfo bison send-pr gprof rcs"
;;
esac
case "${target}" in
*-*-netware)
- noconfigdirs="$noconfigdirs libg++ libstdc++ librx newlib xiberty"
+ noconfigdirs="$noconfigdirs target-libg++ target-libstdc++ target-librx target-newlib target-libiberty"
;;
*-*-vxworks5.1)
- noconfigdirs="$noconfigdirs newlib"
+ noconfigdirs="$noconfigdirs target-newlib"
;;
alpha-dec-osf*)
# ld works, but does not support shared libraries. emacs doesn't
- # work. newlib is not 64 bit ready. I'm not sure about emacs19,
- # fileutils or grep.
- noconfigdirs="$noconfigdirs ld emacs emacs19 fileutils grep newlib"
+ # work. newlib is not 64 bit ready. I'm not sure about fileutils or grep.
+ noconfigdirs="$noconfigdirs ld emacs fileutils grep target-newlib"
;;
alpha*-*-*)
# newlib is not 64 bit ready
- noconfigdirs="$noconfigdirs newlib"
+ noconfigdirs="$noconfigdirs target-newlib"
;;
# start-sanitize-arc
arc-*-*)
;;
h8300*-*-* | \
h8500-*-*)
- noconfigdirs="$noconfigdirs libg++ libstdc++ libio librx"
+ noconfigdirs="$noconfigdirs target-libg++ target-libstdc++ target-libio target-librx"
;;
hppa*-*-*elf* | \
hppa*-*-lites*)
;;
i[345]86-*-go32)
# but don't build gdb
- noconfigdirs="$noconfigdirs gdb libg++ libstdc++ libio librx"
+ noconfigdirs="$noconfigdirs gdb target-libg++ target-libstdc++ target-libio target-librx"
;;
i[345]86-*-win32)
- # Can't build gdb for win32 target
- noconfigdirs="$noconfigdirs gdb tk"
- # but put newlib back
- skipdirs=`echo " ${skipdirs} " | sed -e 's/ newlib / /'`
+ noconfigdirs="$noconfigdirs tk"
+ # Can't build gdb for win32 if not native.
+ if [ x${is_cross_compiler} = xyes ]; then
+ noconfigdirs="$noconfigdirs gdb"
+ fi
+ # always build newlib.
+ skipdirs=`echo " ${skipdirs} " | sed -e 's/ target-newlib / /'`
+ # and winsup
+ configdirs="$configdirs target-winsup"
;;
i[345]86-*-pe)
- noconfigdirs="$noconfigdirs libg++ libstdc++ libio librx"
+ noconfigdirs="$noconfigdirs target-libg++ target-libstdc++ target-libio target-librx"
;;
i[345]86-*-sco*)
noconfigdirs="$noconfigdirs gprof"
# but that's okay since emacs doesn't work anyway
noconfigdirs="$noconfigdirs emacs emacs19"
;;
+# start-sanitize-jaguar
+ jaguar-*-*)
+ ;;
+# end-sanitize-jaguar
powerpc-*-aix*)
# copied from rs6000-*-* entry
- noconfigdirs="$noconfigdirs gas ld binutils gprof textutils cvs"
+ noconfigdirs="$noconfigdirs gprof cvs"
;;
powerpc*-*-winnt* | powerpc*-*-pe*)
noconfigdirs="$noconfigdirs ld gdb"
;;
rs6000-*-lynxos*)
- # a gcc built textutils will cause the linker to hang on 'join'
# The CVS server code doesn't work on the RS/6000
# Newlib makes problems for libg++ in crosses.
- noconfigdirs="$noconfigdirs gas ld newlib gprof textutils cvs"
- use_gnu_ld=no
- use_gnu_as=no
+ noconfigdirs="$noconfigdirs target-newlib gprof cvs"
;;
rs6000-*-*)
- # a gcc built textutils will cause the linker to hang on 'join'
- noconfigdirs="$noconfigdirs gas ld binutils gprof textutils"
+ noconfigdirs="$noconfigdirs gprof"
;;
m68k-*-netbsd*)
noconfigdirs="$noconfigdirs gdb"
;;
sparc-*-sunos4*)
if [ x${is_cross_compiler} != xno ] ; then
- noconfigdirs="$noconfigdirs gdb gdbtest newlib"
+ noconfigdirs="$noconfigdirs gdb gdbtest target-newlib"
else
use_gnu_ld=no
fi
;;
v810-*-*)
- noconfigdirs="$noconfigdirs bfd binutils gas gcc gdb ld libg++ libstdc++ opcodes"
+ noconfigdirs="$noconfigdirs bfd binutils gas gcc gdb ld target-libg++ target-libstdc++ opcodes"
;;
vax-*-vms)
- noconfigdirs="$noconfigdirs bfd binutils gdb ld newlib opcodes"
+ noconfigdirs="$noconfigdirs bfd binutils gdb ld target-newlib opcodes"
;;
vax-*-*)
- noconfigdirs="$noconfigdirs newlib"
+ noconfigdirs="$noconfigdirs target-newlib"
;;
*-*-lynxos*)
# Newlib makes problems for libg++ in crosses.
- noconfigdirs="$noconfigdirs newlib"
+ noconfigdirs="$noconfigdirs target-newlib"
;;
esac
# Remove the entries in $skipdirs and $noconfigdirs from $configdirs and
# $target_configdirs.
# If we have the source for $noconfigdirs entries, add them to $notsupp.
+
notsupp=""
for dir in . $skipdirs $noconfigdirs ; do
if [ $dir != . ] && echo " ${configdirs} " | grep " ${dir} " >/dev/null 2>&1; then
# Deconfigure all subdirectories, in case we are changing the
# configuration from one where a subdirectory is supported to one where it
# is not.
-if [ -z "${norecursion}" ]; then
- for i in ${configdirs} ${target_configdirs}; do
+if [ -z "${norecursion}" -a -n "${configdirs}" ]; then
+ for i in ${configdirs} ; do
rm -f $i/Makefile
done
fi
+if [ -z "${norecursion}" -a -n "${target_configdirs}" ]; then
+ for i in ${target_configdirs} ; do
+ rm -f ${target_subdir}/$i/Makefile
+ done
+fi
# Produce a warning message for the subdirs we can't configure.
# This isn't especially interesting in the Cygnus tree, but in the individual
# post-target:
# Record target_configdirs and the configure arguments in Makefile.
+target_configdirs=`echo "${target_configdirs}" | sed -e 's/target-//g'`
targargs=`echo "${arguments}" | \
sed -e 's/--*norecursion//' \
-e 's/--*cache[a-z-]*=[^ ]*//' \
-e 's/--*cache[a-z-]*[ ][ ]*[^ ]*//'`
sed -e "s:^TARGET_CONFIGDIRS[ ]*=.*$:TARGET_CONFIGDIRS = ${target_configdirs}:" \
-e "s%^CONFIG_ARGUMENTS[ ]*=.*$%CONFIG_ARGUMENTS = ${targargs}%" \
+ -e "s%^TARGET_SUBDIR[ ]*=.*$%TARGET_SUBDIR = ${target_subdir}%" \
Makefile > Makefile.tem
rm -f Makefile
mv -f Makefile.tem Makefile
projects / deliverable / binutils-gdb.git / blobdiff