* section.c (STD_SECTION): Account for recently added gc_mark

[deliverable/binutils-gdb.git] / configure.in

diff --git a/configure.in b/configure.in
index b9a1550bb978ead2820ec8abecae23b7578f6ed5..9acf50d0069abf7562009572e78e1ed72ccfde0c 100644 (file)
--- a/configure.in
+++ b/configure.in
@@ -45,6 +45,9 @@ host_libs="intl mmalloc libiberty opcodes bfd readline gash db tcl tk tclX itcl
 # start-sanitize-ide
 host_libs="${host_libs} libide libidetcl"
 # end-sanitize-ide
+# start-sanitize-cygnus
+host_libs="${host_libs} flexlm"
+# end-sanitize-cygnus
 
 if [ "${enable_gdbgui}" = "yes" ] ; then
        host_libs="${host_libs} libgui"
@@ -61,8 +64,17 @@ host_tools="${host_tools} ilu vmake jstools"
 # these libraries are built for the target environment, and are built after
 # the host libraries and the host tools (which may be a cross compiler)
 #
-target_libs="target-libiberty target-libgloss target-newlib target-libio target-librx target-libstdc++ target-libg++ target-libjava target-boehm-gc"
-
+target_libs="target-libiberty \
+               target-libgloss \
+               target-newlib \
+               target-libio \
+               target-librx \
+               target-libstdc++ \
+               ${start-sanitize-java}
+               target-libjava \
+               target-boehm-gc \
+               ${end-sanitize-java}
+               target-libg++"
 
 # these tools are built using the target libs, and are intended to run only
 # in the target environment
@@ -234,7 +246,7 @@ fi
 
 # If we aren't going to be using gcc, see if we can extract a definition
 # of CC from the fragment.
-if [ -z "${CC}" -a "${build}" = "${host}" ]; then
+if [ -z "${CC}" ] && [ "${build}" = "${host}" ]; then
   IFS="${IFS=  }"; save_ifs="$IFS"; IFS="${IFS}:"
   found=
   for dir in $PATH; do
@@ -245,7 +257,7 @@ if [ -z "${CC}" -a "${build}" = "${host}" ]; then
     fi
   done
   IFS="$save_ifs"
-  if [ -z "${found}" -a -n "${host_makefile_frag}" -a -f "${srcdir}/${host_makefile_frag}" ]; then
+  if [ -z "${found}" ] && [ -n "${host_makefile_frag}" ] && [ -f "${srcdir}/${host_makefile_frag}" ]; then
     xx=`sed -n -e 's/^[        ]*CC[   ]*=[    ]*\(.*\)$/\1/p' < ${srcdir}/${host_makefile_frag}`
     if [ -n "${xx}" ] ; then
       CC=$xx
@@ -257,8 +269,8 @@ fi
 # Well, we don't yet, but we will.
 if false && [ "${host}" = "${target}" ] && [ x${enable_shared} = x ]; then
   case "${target}" in
-    alpha-dec-osf*)    enable_shared=yes ;;
-    alpha-*-linux*)    enable_shared=yes ;;
+    alpha*-dec-osf*)   enable_shared=yes ;;
+    alpha*-*-linux*)   enable_shared=yes ;;
     mips-sgi-irix5*)   enable_shared=yes ;;
     *)                 enable_shared=no ;;
   esac
@@ -288,7 +300,7 @@ if [ x${shared} = xyes ]; then
     powerpc*-*)
       host_makefile_frag="${host_makefile_frag} config/mh-ppcpic"
       ;;
-    alpha-*-linux*)
+    alpha*-*-linux*)
       host_makefile_frag="${host_makefile_frag} config/mh-elfalphapic"
       ;;
     *)
@@ -523,12 +535,18 @@ case "${host}" in
 # start-sanitize-ide
     noconfigdirs="$noconfigdirs libide libidetcl vmake jstools"
 # end-sanitize-ide
+# start-sanitize-cygnus
+    noconfigdirs="$noconfigdirs flexlm"
+# end-sanitize-cygnus
     ;;
   i[3456]86-*-go32* | i[3456]86-*-msdosdjgpp*)
     noconfigdirs="tcl tk expect dejagnu make texinfo bison patch flex byacc send-pr uudecode dejagnu diff guile perl apache inet itcl tix db snavigator gnuserv gettext"
 # start-sanitize-ide
     noconfigdirs="$noconfigdirs libide libidetcl vmake jstools"
 # end-sanitize-ide
+# start-sanitize-cygnus
+    noconfigdirs="$noconfigdirs flexlm"
+# end-sanitize-cygnus
        ;;
   i[3456]86-*-mingw32*)
     # noconfigdirs="tcl tk expect dejagnu make texinfo bison patch flex byacc send-pr uudecode dejagnu diff guile perl apache inet itcl tix db snavigator gnuserv"
@@ -551,6 +569,9 @@ case "${host}" in
 # start-sanitize-ide
      noconfigdirs="$noconfigdirs libide libidetcl vmake jstools"
 # end-sanitize-ide
+# start-sanitize-cygnus
+     noconfigdirs="$noconfigdirs flexlm"
+# end-sanitize-cygnus
     ;;
 esac
 
@@ -565,7 +586,7 @@ case "${target}" in
   *-*-vxworks*)
     noconfigdirs="$noconfigdirs target-newlib target-libgloss"
     ;;
-  alpha-dec-osf*)
+  alpha*-dec-osf*)
     # ld works, but does not support shared libraries.  emacs doesn't
     # work.  newlib is not 64 bit ready.  I'm not sure about fileutils.
     # gas doesn't generate exception information.
@@ -574,7 +595,7 @@ case "${target}" in
   alpha*-*-*vms*)
     noconfigdirs="$noconfigdirs gdb ld target-newlib target-libgloss"
     ;;
-  alpha-*-linux*)
+  alpha*-*-linux*)
     # newlib is not 64 bit ready
     noconfigdirs="$noconfigdirs target-newlib target-libgloss"
     # linux has rx in libc
@@ -639,6 +660,9 @@ case "${target}" in
     case "${host}" in
       i[3456]86-*-mingw32) ;; # keep gdb tcl tk expect etc.
       *) noconfigdirs="$noconfigdirs gdb tcl tk expect itcl tix db snavigator gnuserv"
+# start-sanitize-cygnus
+         noconfigdirs="$noconfigdirs flexlm"
+# end-sanitize-cygnus
          ;;
     esac
     ;;    
@@ -655,6 +679,9 @@ case "${target}" in
 # start-sanitize-ide
          noconfigdirs="$noconfigdirs libide libidetcl vmake jstools"
 # end-sanitize-ide
+# start-sanitize-cygnus
+        noconfigdirs="$noconfigdirs flexlm"
+# end-sanitize-cygnus
          ;;
     esac
     ;;    
@@ -685,10 +712,16 @@ case "${target}" in
     noconfigdirs="$noconfigdirs emacs emacs19 target-libgloss"
     ;;
   mn10200-*-*)
-    noconfigdirs="$noconfigdirs target-libgloss"
+    noconfigdirs="$noconfigdirs"
+    if [ x${is_cross_compiler} != xno ] ; then
+          target_configdirs="${target_configdirs} target-libstub target-cygmon"
+    fi
     ;;
   mn10300-*-*)
     noconfigdirs="$noconfigdirs"
+    if [ x${is_cross_compiler} != xno ] ; then
+          target_configdirs="${target_configdirs} target-libstub target-cygmon"
+    fi
     ;;
   powerpc-*-aix*)
     # copied from rs6000-*-* entry
@@ -702,6 +735,9 @@ case "${target}" in
 # start-sanitize-ide
     noconfigdirs="$noconfigdirs libide libidetcl vmake jstools"
 # end-sanitize-ide
+# start-sanitize-cygnus
+    noconfigdirs="$noconfigdirs flexlm"
+# end-sanitize-cygnus 
     # always build newlib.
     skipdirs=`echo " ${skipdirs} " | sed -e 's/ target-newlib / /'`
     ;;
@@ -711,6 +747,9 @@ case "${target}" in
 # start-sanitize-ide
     noconfigdirs="$noconfigdirs libide libidetcl vmake jstools"
 # end-sanitize-ide
+# start-sanitize-cygnus
+    noconfigdirs="$noconfigdirs flexlm"
+# end-sanitize-cygnus
     ;;
   rs6000-*-lynxos*)
     # The CVS server code doesn't work on the RS/6000
@@ -744,6 +783,10 @@ case "${target}" in
   mips*-*-bsd*)
     noconfigdirs="$noconfigdirs gprof target-libgloss"
     ;;
+   mipstx39-*-*)
+   noconfigdirs="$noconfigdirs gprof"   # same as generic mips
+    target_configdirs="${target_configdirs} target-libstub target-cygmon"
+   ;;
   mips*-*-*)
     noconfigdirs="$noconfigdirs gprof"
     ;;
@@ -890,12 +933,12 @@ fi
 # Deconfigure all subdirectories, in case we are changing the
 # configuration from one where a subdirectory is supported to one where it
 # is not.
-if [ -z "${norecursion}" -a -n "${configdirs}" ]; then
+if [ -z "${norecursion}" ] && [ -n "${configdirs}" ]; then
   for i in `echo ${configdirs} | sed -e s/target-//g` ; do
     rm -f $i/Makefile
   done
 fi
-if [ -z "${norecursion}" -a -n "${target_configdirs}" ]; then
+if [ -z "${norecursion}" ] && [ -n "${target_configdirs}" ]; then
   for i in `echo ${target_configdirs} | sed -e s/target-//g` ; do
     rm -f ${target_subdir}/$i/Makefile
   done
@@ -982,7 +1025,7 @@ if [ x${shared} = xyes ]; then
     powerpc*-*)
       target_makefile_frag="${target_makefile_frag} config/mt-ppcpic"
       ;;
-    alpha-*-linux*)
+    alpha*-*-linux*)
       target_makefile_frag="${target_makefile_frag} config/mt-elfalphapic"
       ;;
     *)
@@ -1100,6 +1143,12 @@ if [ x${enable_multilib} = x ]; then
   targargs="--enable-multilib ${targargs}"
 fi
 
+# Pass --with-newlib if appropriate.  Note that target_configdirs has
+# changed from the earlier setting of with_newlib.
+if [ x${with_newlib} != xno ] && echo " ${target_configdirs} " | grep " newlib " > /dev/null 2>&1 && [ -d ${srcdir}/newlib ] ; then
+  targargs="--with-newlib ${targargs}"
+fi
+
 targargs="--host=${target_alias} --build=${build_alias} ${targargs}"
 sed -e "s:^TARGET_CONFIGDIRS[  ]*=.*$:TARGET_CONFIGDIRS = ${target_configdirs}:" \
     -e "s%^CONFIG_ARGUMENTS[   ]*=.*$%CONFIG_ARGUMENTS = ${targargs}%" \