## For more information on these two systems, check out the documentation
## for 'Autoconf' (autoconf.texi) and 'Configure' (configure.texi).
-# Copyright (C) 1992, 93, 94, 95, 1996 Free Software Foundation, Inc.
+# Copyright (C) 1992, 93, 94, 95, 96, 1997 Free Software Foundation, Inc.
#
# This file is free software; you can redistribute it and/or modify it
# under the terms of the GNU General Public License as published by
# these libraries are used by various programs built for the host environment
#
-host_libs="mmalloc libiberty opcodes bfd readline gash tcl tk tclX"
+host_libs="mmalloc libiberty opcodes bfd readline gash db tcl tk tclX itcl tix libide"
if [ "${enable_gdbgui}" = "yes" ] ; then
host_libs="${host_libs} libgui"
fi
# these tools are built for the host environment
-#
-host_tools="texinfo byacc flex bison binutils ld gas gcc gdb make patch prms send-pr gprof gdbtest tgas etc expect dejagnu sim bash m4 autoconf ispell grep diff rcs cvs fileutils shellutils time textutils wdiff find emacs emacs19 uudecode hello tar gzip indent recode release sed utils guile perl apache inet gawk findutils"
-
+# Note, the powerpc-eabi build depends on sim occurring before gdb in order to
+# know that we are building the simulator.
+host_tools="texinfo byacc flex bison binutils ld gas gcc sim gdb make patch prms send-pr gprof gdbtest tgas etc expect dejagnu bash m4 autoconf automake ispell grep diff rcs cvssrc fileutils shellutils time textutils wdiff find emacs emacs19 uudecode hello tar gzip indent recode release sed utils guile perl apache inet gawk findutils sn"
+# start-sanitize-ide
+host_tools="${host_tools} ilu vmake jstools"
+# end-sanitize-ide
# these libraries are built for the target environment, and are built after
# the host libraries and the host tools (which may be a cross compiler)
# list belongs in this list. those programs are also very likely
# candidates for the "native_only" list which follows
#
-target_tools="target-examples target-groff"
+target_tools="target-examples target-groff target-gperf"
################################################################################
#
# This must be a single line because of the way it is searched by grep in
# the code below.
-native_only="autoconf cvs emacs emacs19 fileutils find gawk grep gzip hello indent ispell m4 rcs recode sed shellutils tar textutils gash uudecode wdiff gprof target-groff guile perl apache inet time bash prms"
+native_only="autoconf automake cvssrc emacs emacs19 fileutils find gawk grep gzip hello indent ispell m4 rcs recode sed shellutils tar textutils gash uudecode wdiff gprof target-groff guile perl apache inet time bash prms sn gnuserv target-gperf"
# directories to be built in a cross environment only
#
-cross_only="target-libiberty target-libgloss target-newlib"
+cross_only="target-libgloss target-newlib target-cygmon target-opcodes"
## All tools belong in one of the four categories, and are assigned above
## We assign ${configdirs} this way to remove all embedded newlines. This
i[3456]86-*-solaris2*) host_makefile_frag=config/mh-sysv4 ;;
i[3456]86-*-aix*) host_makefile_frag=config/mh-aix386 ;;
i[3456]86-*-go32*) host_makefile_frag=config/mh-go32 ;;
+ i[3456]86-*-msdosdjgpp*) host_makefile_frag=config/mh-go32 ;;
*-cygwin32*) host_makefile_frag=config/mh-cygwin32 ;;
*-windows*) host_makefile_frag=config/mh-windows ;;
vax-*-ultrix2*) host_makefile_frag=config/mh-vaxult2 ;;
hppa*) waugh=config/mh-papic ;;
i[3456]86-*) waugh=config/mh-x86pic ;;
sparc64-*) waugh=config/mh-sparcpic ;;
+ powerpc*-*) waugh=config/mh-ppcpic ;;
*) waugh=config/mh-${host_cpu}pic ;;
esac
if [ -f ${srcdir}/${waugh} ]; then
case "${target}" in
v810*) target_makefile_frag=config/mt-v810 ;;
i[3456]86-*-netware*) target_makefile_frag=config/mt-netware ;;
+# start-sanitize-r5900
+ mips64r5900*-*-*) target_makefile_frag=config/mt-r5900 ;;
+# end-sanitize-r5900
powerpc-*-netware*) target_makefile_frag=config/mt-netware ;;
+ *-*-linux-gnu) target_makefile_frag=config/mt-linux ;;
esac
skipdirs=
yes | "") # the default value for this tree is that X11 is available
;;
no)
- skipdirs="${skipdirs} tk gash"
+ skipdirs="${skipdirs} libide tk gash"
+# start-sanitize-ide
+ skipdirs="${skipdirs} vmake jstools"
+# end-sanitize-ide
;;
*)
echo "*** bad value \"${with_x}\" for -with-x flag; ignored" 1>&2
skipdirs="${skipdirs} ${cross_only}"
is_cross_compiler=no
target_subdir=.
+ case "${host}" in
+ # We need multilib support for irix6, to get libiberty built
+ # properly for o32 and n32.
+ mips-sgi-irix6*) target_subdir=${host} ;;
+ esac
else
# similarly, don't build the targets in the 'native only'
# list when building a cross compiler
skipdirs="${skipdirs} ${native_only}"
is_cross_compiler=yes
target_subdir=${target_alias}
- if [ ! -d ${target_subdir} ] ; then
- if mkdir ${target_subdir} ; then true
- else
- echo "'*** could not make ${PWD=`pwd`}/${target_subdir}" 1>&2
- exit 1
- fi
- fi
fi
+if [ ! -d ${target_subdir} ] ; then
+ if mkdir ${target_subdir} ; then true
+ else
+ echo "'*** could not make ${PWD=`pwd`}/${target_subdir}" 1>&2
+ exit 1
+ fi
+fi
+
copy_dirs=
# Handle --with-headers=XXX. The contents of the named directory are
:
else
echo >config.temp
- ${srcdir}/install.sh -c -m 644 config.temp $2/COPIED
+ ${srcdir}/install-sh -c -m 644 config.temp $2/COPIED
fi
# Copy the directory, assuming we have tar.
case "${host}" in
i[3456]86-*-vsta)
- noconfigdirs="tcl expect dejagnu make texinfo bison patch flex byacc send-pr gprof uudecode dejagnu diff guile perl apache inet"
- ;;
- i[3456]86-*-go32)
- noconfigdirs="tcl tk expect dejagnu make texinfo bison patch flex byacc send-pr gprof uudecode dejagnu diff guile perl apache inet"
+ noconfigdirs="tcl expect dejagnu make texinfo bison patch flex byacc send-pr gprof uudecode dejagnu diff guile perl apache inet itcl tix db sn gnuserv"
+# start-sanitize-ide
+ noconfigdirs="$noconfigdirs vmake jstools"
+# end-sanitize-ide
+ ;;
+ i[3456]86-*-go32* | i[3456]86-*-msdosdjgpp*)
+ noconfigdirs="tcl tk expect dejagnu make texinfo bison patch flex byacc send-pr uudecode dejagnu diff guile perl apache inet itcl tix db sn gnuserv"
+# start-sanitize-ide
+ noconfigdirs="$noconfigdirs vmake jstools"
+# end-sanitize-ide
;;
*-*-cygwin32)
- noconfigdirs="tk tcl expect dejagnu cvs autoconf bison send-pr gprof rcs guile perl texinfo apache inet"
+ noconfigdirs="expect dejagnu cvssrc autoconf automake send-pr gprof rcs guile perl texinfo apache inet"
;;
*-*-windows*)
# This is only used to build WinGDB...
- configdirs="bfd gdb libiberty opcodes readline sim"
+# note that powerpc-eabi depends on sim configured before gdb.
+ configdirs="bfd libiberty opcodes readline sim gdb"
target_configdirs=
;;
ppc*-*-pe)
- noconfigdirs="patch diff make tk tcl expect dejagnu cvs autoconf texinfo bison send-pr gprof rcs guile perl apache inet"
+ noconfigdirs="patch diff make tk tcl expect dejagnu cvssrc autoconf automake texinfo bison send-pr gprof rcs guile perl apache inet itcl tix db sn gnuserv"
+# start-sanitize-ide
+ noconfigdirs="$noconfigdirs vmake jstools"
+# end-sanitize-ide
;;
esac
*-*-netware)
noconfigdirs="$noconfigdirs target-libg++ target-libstdc++ target-librx target-newlib target-libiberty target-libgloss"
;;
+ *-*-rtems*)
+ noconfigdirs="$noconfigdirs target-libgloss"
+ ;;
*-*-vxworks*)
noconfigdirs="$noconfigdirs target-newlib target-libgloss"
;;
alpha-dec-osf*)
# ld works, but does not support shared libraries. emacs doesn't
- # work. newlib is not 64 bit ready. I'm not sure about fileutils or grep.
+ # work. newlib is not 64 bit ready. I'm not sure about fileutils.
# gas doesn't generate exception information.
- noconfigdirs="$noconfigdirs gas ld emacs fileutils grep target-newlib target-libgloss"
+ noconfigdirs="$noconfigdirs gas ld emacs fileutils target-newlib target-libgloss"
;;
alpha*-*-*vms*)
noconfigdirs="$noconfigdirs gdb ld target-newlib target-libgloss"
# newlib is not 64 bit ready
noconfigdirs="$noconfigdirs target-newlib target-libgloss"
;;
-# start-sanitize-arc
arc-*-*)
noconfigdirs="$noconfigdirs target-libgloss"
;;
-# end-sanitize-arc
arm-*-pe*)
noconfigdirs="$noconfigdirs target-libgloss"
;;
arm-*-coff*)
noconfigdirs="$noconfigdirs target-libgloss"
;;
+ thumb-*-coff) # CYGNUS LOCAL nickc/thumb
+ noconfigdirs="$noconfigdirs target-libgloss"
+ ;;
arm-*-riscix*)
noconfigdirs="$noconfigdirs ld target-libgloss"
;;
-# start-sanitize-d10v
d10v-*-*)
noconfigdirs="$noconfigdirs target-librx target-libg++ target-libstdc++ target-libio target-libgloss"
;;
-# end-sanitize-d10v
+# start-sanitize-d30v
+ d30v-*-*)
+# start-sanitize-ide
+ noconfigdirs="$noconfigdirs vmake jstools"
+# end-sanitize-ide
+ ;;
+# end-sanitize-d30v
h8300*-*-* | \
h8500-*-*)
noconfigdirs="$noconfigdirs target-libg++ target-libstdc++ target-libio target-librx target-libgloss"
esac
noconfigdirs="$noconfigdirs ld shellutils"
;;
- i[3456]86-*-go32)
+ i[3456]86-*-go32* | i[3456]-*-msdosdjgpp*)
# but don't build gdb
noconfigdirs="$noconfigdirs gdb target-libg++ target-libstdc++ target-libio target-librx"
;;
*-*-cygwin32)
target_configdirs="$target_configdirs target-winsup"
- noconfigdirs="$noconfigdirs tcl tk expect target-libgloss"
+ noconfigdirs="$noconfigdirs expect target-libgloss"
# always build newlib.
skipdirs=`echo " ${skipdirs} " | sed -e 's/ target-newlib / /'`
# Can't build gdb for cygwin32 if not native.
case "${host}" in
- *-*-cygwin32) ;; # keep gdb
- *) noconfigdirs="$noconfigdirs gdb"
+ *-*-cygwin32) ;; # keep gdb tcl tk expect etc.
+ *) noconfigdirs="$noconfigdirs gdb tcl tk expect itcl tix db sn gnuserv"
+# start-sanitize-ide
+ noconfigdirs="$noconfigdirs vmake jstools"
+# end-sanitize-ide
+ ;;
esac
;;
i[3456]86-*-pe)
noconfigdirs="$noconfigdirs emacs emacs19 target-libgloss"
;;
mn10200-*-*)
- noconfigdirs="$noconfigdirs gdb target-libgloss"
+ noconfigdirs="$noconfigdirs target-libgloss"
;;
mn10300-*-*)
noconfigdirs="$noconfigdirs target-libgloss"
;;
powerpc-*-aix*)
# copied from rs6000-*-* entry
- noconfigdirs="$noconfigdirs gprof cvs target-libgloss"
+ noconfigdirs="$noconfigdirs gprof cvssrc target-libgloss"
# This is needed until gcc and ld are fixed to work together.
use_gnu_ld=no
;;
powerpc*-*-winnt* | powerpc*-*-pe* | ppc*-*-pe)
target_configdirs="$target_configdirs target-winsup"
- noconfigdirs="$noconfigdirs gdb tcl tk make expect target-libgloss"
+ noconfigdirs="$noconfigdirs gdb tcl tk make expect target-libgloss itcl tix db sn gnuserv"
+# start-sanitize-ide
+ noconfigdirs="$noconfigdirs vmake jstools"
+# end-sanitize-ide
# always build newlib.
skipdirs=`echo " ${skipdirs} " | sed -e 's/ target-newlib / /'`
;;
# This is temporary until we can link against shared libraries
powerpcle-*-solaris*)
- noconfigdirs="$noconfigdirs gdb sim make tcl tk expect"
+ noconfigdirs="$noconfigdirs gdb sim make tcl tk expect itcl tix db sn gnuserv"
+# start-sanitize-ide
+ noconfigdirs="$noconfigdirs vmake jstools"
+# end-sanitize-ide
;;
rs6000-*-lynxos*)
# The CVS server code doesn't work on the RS/6000
# Newlib makes problems for libg++ in crosses.
- noconfigdirs="$noconfigdirs target-newlib gprof cvs"
+ noconfigdirs="$noconfigdirs target-newlib gprof cvssrc"
;;
rs6000-*-aix*)
noconfigdirs="$noconfigdirs gprof"
noconfigdirs="$noconfigdirs ld gprof emacs target-libgloss"
;;
mips*-*-irix6*)
- # The GNU linker does not support shared libraries.
+ # The GNU assembler and linker do not support IRIX 6.
# emacs is emacs 18, which does not work on Irix 5 (emacs19 does work)
noconfigdirs="$noconfigdirs ld gas gprof emacs target-libgloss"
;;
sh-*-*)
case "${host}" in
i[3456]86-*-vsta) ;; # don't add gprof back in
- i[3456]86-*-go32) ;; # don't add gprof back in
+ i[3456]86-*-go32*) ;; # don't add gprof back in
+ i[3456]86-*-msdosdjgpp*) ;; # don't add gprof back in
*) skipdirs=`echo " ${skipdirs} " | sed -e 's/ gprof / /'` ;;
esac
noconfigdirs="$noconfigdirs target-libgloss"
;;
+ sparc-*-elf*)
+ if [ x${is_cross_compiler} != xno ] ; then
+ target_configdirs="${target_configdirs} target-cygmon"
+ fi
+ ;;
+ sparclite-*-aout*)
+ if [ x${is_cross_compiler} != xno ] ; then
+ target_configdirs="${target_configdirs} target-cygmon"
+ fi
+ ;;
sparc-*-sunos4*)
if [ x${is_cross_compiler} != xno ] ; then
noconfigdirs="$noconfigdirs gdb gdbtest target-newlib target-libgloss"
use_gnu_ld=no
fi
;;
-# start-sanitize-tic80
- tic80-*-*)
- noconfigdirs="$noconfigdirs gcc gdb ld target-libio target-libg++ target-libstdc++ target-libgloss"
- ;;
-# end-sanitize-v850
v810-*-*)
noconfigdirs="$noconfigdirs bfd binutils gas gcc gdb ld target-libio target-libg++ target-libstdc++ opcodes target-libgloss"
;;
-# start-sanitize-v850
v850-*-*)
noconfigdirs="$noconfigdirs target-libgloss"
;;
-# end-sanitize-v850
+# start-sanitize-v850e
+ v850e-*-*)
+ noconfigdirs="$noconfigdirs target-libgloss"
+ ;;
+ v850ea-*-*)
+ noconfigdirs="$noconfigdirs target-libgloss"
+ ;;
+# end-sanitize-v850e
vax-*-vms)
noconfigdirs="$noconfigdirs bfd binutils gdb ld target-newlib opcodes target-libgloss"
;;
;;
esac
-# targets that need a second pass
-case "${target}" in
- *-gm-magic*)
- noconfigdirs="$noconfigdirs target-libgloss"
- ;;
-esac
-
# If we aren't building newlib, then don't build libgloss, since libgloss
# depends upon some newlib header files.
case "${noconfigdirs}" in
# If we are building a Canadian Cross, discard tools that can not be built
# using a cross compiler. FIXME: These tools should be fixed.
if [ "${build}" != "${host}" ]; then
- noconfigdirs="$noconfigdirs tcl tk expect dejagnu"
+ noconfigdirs="$noconfigdirs expect dejagnu"
fi
# Make sure we don't let GNU ld be added if we didn't want it.
if [ x${shared} = xyes ]; then
case "${target}" in
hppa*) target_makefile_frag=config/mt-papic ;;
- i[3456]86-*) target_makefile_frag=config/mt-x86pic ;;
+ i[3456]86-*) target_makefile_frag=config/mt-x86pic ;;
+ powerpc*-*) target_makefile_frag=config/mt-ppcpic ;;
*) target_makefile_frag=config/mt-${target_cpu}pic ;;
esac
fi
esac
fi
+# If we are building for a cygwin32 host, then set INSTALL_PROGRAM_ARGS to
+# -x. This will cause programs to be installed with .exe extensions.
+case "${host}" in
+*-*-cygwin32*)
+ sed -e 's/^INSTALL_PROGRAM_ARGS[ ]*=.*$/INSTALL_PROGRAM_ARGS = -x/' \
+ Makefile > Makefile.tem
+ rm -f Makefile
+ mv -f Makefile.tem Makefile
+ ;;
+esac
+
# Record target_configdirs and the configure arguments in Makefile.
target_configdirs=`echo "${target_configdirs}" | sed -e 's/target-//g'`
targargs=`echo "${arguments}" | \
sed -e 's/--norecursion//' \
-e 's/--cache[a-z-]*=[^ ]*//' \
-e 's/--ho[a-z-]*=[^ ]*//' \
+ -e 's/--bu[a-z-]*=[^ ]*//' \
-e 's/--ta[a-z-]*=[^ ]*//'`
# Passing a --with-cross-host argument lets the target libraries know
targargs="--with-cross-host=${host_alias} ${targargs}"
fi
-targargs="--host=${target_alias} ${targargs}"
+# Default to --enable-multilib.
+if [ x${enable_multilib} = x ]; then
+ targargs="--enable-multilib ${targargs}"
+fi
+
+targargs="--host=${target_alias} --build=${build_alias} ${targargs}"
sed -e "s:^TARGET_CONFIGDIRS[ ]*=.*$:TARGET_CONFIGDIRS = ${target_configdirs}:" \
-e "s%^CONFIG_ARGUMENTS[ ]*=.*$%CONFIG_ARGUMENTS = ${targargs}%" \
-e "s%^TARGET_SUBDIR[ ]*=.*$%TARGET_SUBDIR = ${target_subdir}%" \
projects / deliverable / binutils-gdb.git / blobdiff