Add m32r to multilib support.

[deliverable/binutils-gdb.git] / configure.in

diff --git a/configure.in b/configure.in
index 5eea34d42a2d0bd083fdbcf3a16542954c104f0c..a83961625a75dab97aea35fb5b8d824a9a7997d2 100644 (file)
--- a/configure.in
+++ b/configure.in
@@ -41,10 +41,7 @@
 
 # these libraries are used by various programs built for the host environment
 #
-host_libs="mmalloc libiberty opcodes bfd readline gash db tcl tk tclX itcl tix"
-# start-sanitize-ide
-host_libs="${host_libs} libide"
-# end-sanitize-ide
+host_libs="mmalloc libiberty opcodes bfd readline gash db tcl tk tclX itcl tix libide"
 
 if [ "${enable_gdbgui}" = "yes" ] ; then
        host_libs="${host_libs} libgui"
@@ -53,7 +50,7 @@ fi
 # these tools are built for the host environment
 # Note, the powerpc-eabi build depends on sim occurring before gdb in order to
 # know that we are building the simulator.
-host_tools="texinfo byacc flex bison binutils ld gas gcc sim gdb make patch prms send-pr gprof gdbtest tgas etc expect dejagnu bash m4 autoconf automake ispell grep diff rcs cvs fileutils shellutils time textutils wdiff find emacs emacs19 uudecode hello tar gzip indent recode release sed utils guile perl apache inet gawk findutils sn"
+host_tools="texinfo byacc flex bison binutils ld gas gcc sim gdb make patch prms send-pr gprof gdbtest tgas etc expect dejagnu bash m4 autoconf automake ispell grep diff rcs cvssrc fileutils shellutils time textutils wdiff find emacs emacs19 uudecode hello tar gzip indent recode release sed utils guile perl apache inet gawk findutils sn"
 # start-sanitize-ide
 host_tools="${host_tools} ilu vmake jstools"
 # end-sanitize-ide
@@ -85,11 +82,11 @@ target_tools="target-examples target-groff target-gperf"
 #
 # This must be a single line because of the way it is searched by grep in
 # the code below.
-native_only="autoconf automake cvs emacs emacs19 fileutils find gawk grep gzip hello indent ispell m4 rcs recode sed shellutils tar textutils gash uudecode wdiff gprof target-groff guile perl apache inet time bash prms sn gnuserv target-gperf"
+native_only="autoconf automake cvssrc emacs emacs19 fileutils find gawk grep gzip hello indent ispell m4 rcs recode sed shellutils tar textutils gash uudecode wdiff gprof target-groff guile perl apache inet time bash prms sn gnuserv target-gperf"
 
 # directories to be built in a cross environment only
 #
-cross_only="target-libgloss target-newlib"
+cross_only="target-libgloss target-newlib target-cygmon target-opcodes"
 
 ## All tools belong in one of the four categories, and are assigned above
 ## We assign ${configdirs} this way to remove all embedded newlines.  This
@@ -217,7 +214,7 @@ case "${target}" in
   v810*)               target_makefile_frag=config/mt-v810 ;;
   i[3456]86-*-netware*) target_makefile_frag=config/mt-netware ;;
 # start-sanitize-r5900
-  mips64vr5900*-*-*)    target_makefile_frag=config/mt-r5900 ;;
+  mips64r5900*-*-*)    target_makefile_frag=config/mt-r5900 ;;
 # end-sanitize-r5900
   powerpc-*-netware*)   target_makefile_frag=config/mt-netware ;;
   *-*-linux-gnu)        target_makefile_frag=config/mt-linux ;;
@@ -235,9 +232,9 @@ case ${with_x} in
   yes | "")  # the default value for this tree is that X11 is available
        ;;
   no)
-       skipdirs="${skipdirs} tk gash"
+       skipdirs="${skipdirs} libide tk gash"
 # start-sanitize-ide
-       skipdirs="${skipdirs} libide vmake jstools"
+       skipdirs="${skipdirs} vmake jstools"
 # end-sanitize-ide
        ;;
   *)
@@ -390,17 +387,17 @@ case "${host}" in
   i[3456]86-*-vsta)
     noconfigdirs="tcl expect dejagnu make texinfo bison patch flex byacc send-pr gprof uudecode dejagnu diff guile perl apache inet itcl tix db sn gnuserv"
 # start-sanitize-ide
-    noconfigdirs="$noconfigdirs libide vmake jstools"
+    noconfigdirs="$noconfigdirs vmake jstools"
 # end-sanitize-ide
     ;;
   i[3456]86-*-go32* | i[3456]86-*-msdosdjgpp*)
     noconfigdirs="tcl tk expect dejagnu make texinfo bison patch flex byacc send-pr uudecode dejagnu diff guile perl apache inet itcl tix db sn gnuserv"
 # start-sanitize-ide
-    noconfigdirs="$noconfigdirs libide vmake jstools"
+    noconfigdirs="$noconfigdirs vmake jstools"
 # end-sanitize-ide
        ;;
   *-*-cygwin32)
-     noconfigdirs="expect dejagnu cvs autoconf automake send-pr gprof rcs guile perl texinfo apache inet"
+     noconfigdirs="expect dejagnu cvssrc autoconf automake send-pr gprof rcs guile perl texinfo apache inet"
     ;;
   *-*-windows*)
 # This is only used to build WinGDB...
@@ -409,9 +406,9 @@ case "${host}" in
      target_configdirs=
     ;;
   ppc*-*-pe)
-     noconfigdirs="patch diff make tk tcl expect dejagnu cvs autoconf automake texinfo bison send-pr gprof rcs guile perl apache inet itcl tix db sn gnuserv"
+     noconfigdirs="patch diff make tk tcl expect dejagnu cvssrc autoconf automake texinfo bison send-pr gprof rcs guile perl apache inet itcl tix db sn gnuserv"
 # start-sanitize-ide
-     noconfigdirs="$noconfigdirs libide vmake jstools"
+     noconfigdirs="$noconfigdirs vmake jstools"
 # end-sanitize-ide
     ;;
 esac
@@ -449,6 +446,9 @@ case "${target}" in
   arm-*-coff*)
     noconfigdirs="$noconfigdirs target-libgloss"
     ;;
+  thumb-*-coff) # CYGNUS LOCAL nickc/thumb
+    noconfigdirs="$noconfigdirs target-libgloss"
+    ;;
   arm-*-riscix*)
     noconfigdirs="$noconfigdirs ld target-libgloss"
     ;;
@@ -457,9 +457,8 @@ case "${target}" in
     ;;
 # start-sanitize-d30v
   d30v-*-*)
-    noconfigdirs="$noconfigdirs tcl tk expect gcc gdb newlib target-librx target-libg++ target-libstdc++ target-libio target-libgloss itcl tix db sn gnuserv target-libiberty target-newlib target-examples"
 # start-sanitize-ide
-    noconfigdirs="$noconfigdirs libide vmake jstools"
+    noconfigdirs="$noconfigdirs vmake jstools"
 # end-sanitize-ide
     ;;
 # end-sanitize-d30v
@@ -496,7 +495,7 @@ case "${target}" in
       *-*-cygwin32) ;; # keep gdb tcl tk expect etc.
       *) noconfigdirs="$noconfigdirs gdb tcl tk expect itcl tix db sn gnuserv"
 # start-sanitize-ide
-         noconfigdirs="$noconfigdirs libide vmake jstools"
+         noconfigdirs="$noconfigdirs vmake jstools"
 # end-sanitize-ide
          ;;
     esac
@@ -535,7 +534,7 @@ case "${target}" in
     ;;
   powerpc-*-aix*)
     # copied from rs6000-*-* entry
-    noconfigdirs="$noconfigdirs gprof cvs target-libgloss"
+    noconfigdirs="$noconfigdirs gprof cvssrc target-libgloss"
     # This is needed until gcc and ld are fixed to work together.
     use_gnu_ld=no
     ;;
@@ -543,7 +542,7 @@ case "${target}" in
     target_configdirs="$target_configdirs target-winsup"
     noconfigdirs="$noconfigdirs gdb tcl tk make expect target-libgloss itcl tix db sn gnuserv"
 # start-sanitize-ide
-    noconfigdirs="$noconfigdirs libide vmake jstools"
+    noconfigdirs="$noconfigdirs vmake jstools"
 # end-sanitize-ide
     # always build newlib.
     skipdirs=`echo " ${skipdirs} " | sed -e 's/ target-newlib / /'`
@@ -552,13 +551,13 @@ case "${target}" in
   powerpcle-*-solaris*)
     noconfigdirs="$noconfigdirs gdb sim make tcl tk expect itcl tix db sn gnuserv"
 # start-sanitize-ide
-    noconfigdirs="$noconfigdirs libide vmake jstools"
+    noconfigdirs="$noconfigdirs vmake jstools"
 # end-sanitize-ide
     ;;
   rs6000-*-lynxos*)
     # The CVS server code doesn't work on the RS/6000
     # Newlib makes problems for libg++ in crosses.
-    noconfigdirs="$noconfigdirs target-newlib gprof cvs"
+    noconfigdirs="$noconfigdirs target-newlib gprof cvssrc"
     ;;
   rs6000-*-aix*)
     noconfigdirs="$noconfigdirs gprof"
@@ -602,6 +601,16 @@ case "${target}" in
     esac
     noconfigdirs="$noconfigdirs target-libgloss"
     ;;
+  sparc-*-elf*)
+    if [ x${is_cross_compiler} != xno ] ; then
+          target_configdirs="${target_configdirs} target-cygmon"
+    fi
+    ;;
+  sparclite-*-aout*)
+    if [ x${is_cross_compiler} != xno ] ; then
+          target_configdirs="${target_configdirs} target-cygmon"
+    fi
+    ;;
   sparc-*-sunos4*)
     if [ x${is_cross_compiler} != xno ] ; then
            noconfigdirs="$noconfigdirs gdb gdbtest target-newlib target-libgloss"
@@ -612,21 +621,17 @@ case "${target}" in
   v810-*-*)
     noconfigdirs="$noconfigdirs bfd binutils gas gcc gdb ld target-libio target-libg++ target-libstdc++ opcodes target-libgloss"
     ;;
-# start-sanitize-v850
   v850-*-*)
     noconfigdirs="$noconfigdirs target-libgloss"
     ;;
-# end-sanitize-v850
 # start-sanitize-v850e
   v850e-*-*)
     noconfigdirs="$noconfigdirs target-libgloss"
     ;;
-# end-sanitize-v850e
-# start-sanitize-v850eq
-  v850eq-*-*)
+  v850ea-*-*)
     noconfigdirs="$noconfigdirs target-libgloss"
     ;;
-# end-sanitize-v850eq
+# end-sanitize-v850e
   vax-*-vms)
     noconfigdirs="$noconfigdirs bfd binutils gdb ld target-newlib opcodes target-libgloss"
     ;;
@@ -644,13 +649,6 @@ case "${target}" in
     ;;    
 esac
 
-# targets that need a second pass
-case "${target}" in
-  *-gm-magic*)
-    noconfigdirs="$noconfigdirs target-libgloss"
-    ;;
-esac
-
 # If we aren't building newlib, then don't build libgloss, since libgloss
 # depends upon some newlib header files.
 case "${noconfigdirs}" in