## For more information on these two systems, check out the documentation
## for 'Autoconf' (autoconf.texi) and 'Configure' (configure.texi).
-# Copyright (C) 1992-99, 2000 Free Software Foundation, Inc.
+# Copyright (C) 1992-99, 2000, 2001 Free Software Foundation, Inc.
#
# This file is free software; you can redistribute it and/or modify it
# under the terms of the GNU General Public License as published by
host_libs="${host_libs} libgui"
fi
-# Set up configure/Makefile variables if libstdc++-v3 is to be built.
-if [ "${enable_libstdcxx_v3}" = "yes" ] && test -d $srcdir/libstdc++-v3; then
- libstdcxx_version="target-libstdc++-v3"
- # Don't use libstdc++-v3's flags to configure/build itself.
- libstdcxx_flags='`case $$dir in libstdc++-v3) ;; *) test -f $$r/$(TARGET_SUBDIR)/libstdc++-v3/mkcheck && $(SHELL) $$r/$(TARGET_SUBDIR)/libstdc++-v3/mkcheck 2 $$r/$(TARGET_SUBDIR)/libstdc++-v3 $$s/libstdc++-v3 | sed -e '"'s/-I/-isystem /g'"' ;; esac` -L$$r/$(TARGET_SUBDIR)/libstd++-v3/src -L$$r/$(TARGET_SUBDIR)/libstd++-v3/src/.libs'
-else
- libstdcxx_version="target-libio target-libstdc++"
- libstdcxx_flags='-isystem $$s/libstdc++ -isystem $$s/libstdc++/std -isystem $$s/libstdc++/stl -isystem $$s/libio/ -isystem $$s/libio/stdio -L$$r/$(TARGET_SUBDIR)/libstdc++'
-fi
+libstdcxx_version="target-libstdc++-v3"
+# Don't use libstdc++-v3's flags to configure/build itself.
+libstdcxx_flags='`case $$dir in libstdc++-v3 | libjava) ;; *) test ! -f $$r/$(TARGET_SUBDIR)/libstdc++-v3/testsuite_flags || $(SHELL) $$r/$(TARGET_SUBDIR)/libstdc++-v3/testsuite_flags --build-includes;; esac` -L$$r/$(TARGET_SUBDIR)/libstdc++-v3/src -L$$r/$(TARGET_SUBDIR)/libstdc++-v3/src/.libs'
# these tools are built for the host environment
# Note, the powerpc-eabi build depends on sim occurring before gdb in order to
# know that we are building the simulator.
-host_tools="texinfo byacc flex bison binutils ld gas gcc sim gdb make patch prms send-pr gprof gdbtest tgas etc expect dejagnu ash bash bzip2 m4 autoconf automake libtool ispell grep diff rcs cvssrc fileutils shellutils time textutils wdiff find emacs emacs19 uudecode hello tar gzip indent recode release sed utils guile perl apache inet gawk findutils snavigator libtool gettext zip"
+host_tools="texinfo byacc flex bison binutils ld gas gcc cgen sid sim gdb make patch prms send-pr gprof gdbtest tgas etc expect dejagnu ash bash bzip2 m4 autoconf automake libtool ispell grep diff rcs cvssrc fileutils shellutils time textutils wdiff find emacs emacs19 uudecode hello tar gzip indent recode release sed utils guile perl apache inet gawk findutils snavigator libtool gettext zip"
# these libraries are built for the target environment, and are built after
# the host libraries and the host tools (which may be a cross compiler)
powerpc*-*-*)
host_makefile_frag="${host_makefile_frag} config/mh-ppcpic"
;;
+ s390-* | s390x-*)
+ host_makefile_frag="${host_makefile_frag} config/mh-s390pic"
+ ;;
*-*-*)
if test -f ${srcdir}/config/mh-${host_cpu}pic; then
host_makefile_frag="${host_makefile_frag} config/mh-${host_cpu}pic"
fi
fi
+build_subdir=${build_alias}
+
+if [ x"${build_alias}" != x"${host}" ] ; then
+ if [ ! -d ${build_subdir} ] ; then
+ if mkdir ${build_subdir} ; then true
+ else
+ echo "'*** could not make ${PWD=`pwd`}/${build_subdir}" 1>&2
+ exit 1
+ fi
+ fi
+fi
+
copy_dirs=
# Handle --with-headers=XXX. The contents of the named directory are
noconfigdirs="$noconfigdirs tk itcl tix libgui gdb"
;;
*-*-cygwin*)
- noconfigdirs="autoconf automake send-pr rcs guile perl texinfo apache inet"
+ noconfigdirs="autoconf automake send-pr rcs guile perl apache inet"
;;
*-*-netbsd*)
noconfigdirs="rcs"
esac
+# Save it here so that, even in case of --enable-libgcj, if the Java
+# front-end isn't enabled, we still get libgcj disabled.
+libgcj_saved=$libgcj
+case $enable_libgcj in
+yes)
+ # If we reset it here, it won't get added to noconfigdirs in the
+ # target-specific build rules, so it will be forcibly enabled
+ # (unless the Java language itself isn't enabled).
+ libgcj=
+ ;;
+no)
+ # Make sure we get it printed in the list of not supported target libs.
+ noconfigdirs="$noconfigdirs ${libgcj}"
+ ;;
+esac
+
case "${target}" in
+ *-*-netbsd*)
+ # Skip some stuff on all NetBSD configurations.
+ skipdirs="$skipdirs target-newlib target-libiberty target-libgloss"
+
+ # Skip some stuff that's unsupported on some NetBSD configurations.
+ case "${target}" in
+ *)
+ noconfigdirs="$noconfigdirs ${libgcj}"
+ ;;
+ esac
+ ;;
*-*-netware)
noconfigdirs="$noconfigdirs ${libstdcxx_version} target-newlib target-libiberty target-libgloss target-libffi"
;;
arm-*-pe*)
noconfigdirs="$noconfigdirs target-libgloss"
;;
- arm-*-coff*)
- noconfigdirs="$noconfigdirs target-libgloss"
- if [ x${is_cross_compiler} != xno ] ; then
- target_configdirs="${target_configdirs} target-bsp target-cygmon"
- fi
- ;;
- arm-*-elf*)
- noconfigdirs="$noconfigdirs target-libgloss"
- if [ x${is_cross_compiler} != xno ] ; then
- target_configdirs="${target_configdirs} target-bsp target-cygmon"
- fi
- ;;
arm-*-oabi*)
noconfigdirs="$noconfigdirs target-libgloss target-libffi"
;;
- c4x-*-*)
- noconfigdirs="$noconfigdirs ${libstdcxx_version} target-libgloss target-libffi"
- ;;
- c54x*-*-* | tic54x-*-*)
- noconfigdirs="$noconfigdirs ${libstdcxx_version} target-libgloss target-libffi gcc gdb newlib"
- ;;
thumb-*-coff)
noconfigdirs="$noconfigdirs target-libgloss target-libffi"
;;
noconfigdirs="$noconfigdirs target-libgloss target-libffi"
;;
strongarm-*-elf)
- noconfigdirs="$noconfigdirs target-libgloss target-libffi"
+ noconfigdirs="$noconfigdirs target-libffi"
if [ x${is_cross_compiler} != xno ] ; then
target_configdirs="${target_configdirs} target-bsp target-cygmon"
fi
;;
strongarm-*-coff)
- noconfigdirs="$noconfigdirs target-libgloss target-libffi"
+ noconfigdirs="$noconfigdirs target-libffi"
+ if [ x${is_cross_compiler} != xno ] ; then
+ target_configdirs="${target_configdirs} target-bsp target-cygmon"
+ fi
+ ;;
+ xscale-*-elf)
+ noconfigdirs="$noconfigdirs target-libffi"
+ if [ x${is_cross_compiler} != xno ] ; then
+ target_configdirs="${target_configdirs} target-bsp target-cygmon"
+ fi
+ ;;
+ xscale-*-coff)
+ noconfigdirs="$noconfigdirs target-libffi"
if [ x${is_cross_compiler} != xno ] ; then
target_configdirs="${target_configdirs} target-bsp target-cygmon"
fi
arm-*-riscix*)
noconfigdirs="$noconfigdirs ld target-libgloss target-libffi"
;;
+ c4x-*-*)
+ noconfigdirs="$noconfigdirs ${libstdcxx_version} target-libgloss target-libffi"
+ ;;
+ c54x*-*-* | tic54x-*-*)
+ noconfigdirs="$noconfigdirs ${libstdcxx_version} target-libgloss target-libffi gcc gdb newlib"
+ ;;
d10v-*-*)
noconfigdirs="$noconfigdirs ${libstdcxx_version} target-libgloss target-libffi"
;;
target_configdirs="${target_configdirs} target-bsp target-libstub target-cygmon"
fi
;;
- h8300*-*-* | \
+ h8300*-*-*)
+ noconfigdirs="$noconfigdirs target-libgloss"
+ ;;
h8500-*-*)
noconfigdirs="$noconfigdirs ${libstdcxx_version} target-libgloss target-libffi"
;;
"" | cc*) noconfigdirs="$noconfigdirs emacs emacs19" ;;
*) ;;
esac
- noconfigdirs="$noconfigdirs ld shellutils"
+ # According to Alexandre Oliva <aoliva@redhat.com>, libjava won't
+ # build on HP-UX 10.20.
+ noconfigdirs="$noconfigdirs ld shellutils ${libgcj}"
;;
ia64*-*-elf*)
# No gdb support yet.
noconfigdirs="$noconfigdirs tix readline mmalloc libgui itcl gdb"
;;
+ ia64*-**-hpux*)
+ # No gdb or ld support yet.
+ noconfigdirs="$noconfigdirs tix readline mmalloc libgui itcl gdb ld"
+ ;;
i[3456]86-*-coff | i[3456]86-*-elf)
if [ x${is_cross_compiler} != xno ] ; then
target_configdirs="${target_configdirs} target-libstub target-cygmon"
;;
i[3456]86-*-mingw32*)
target_configdirs="$target_configdirs target-mingw"
- noconfigdirs="$noconfigdirs expect target-libgloss target-libffi"
+ noconfigdirs="$noconfigdirs expect target-libgloss ${libgcj}"
# Can't build gdb for mingw32 if not native.
case "${host}" in
;;
*-*-cygwin*)
target_configdirs="$target_configdirs target-libtermcap target-winsup"
- noconfigdirs="$noconfigdirs target-gperf target-libgloss target-libffi"
+ noconfigdirs="$noconfigdirs target-gperf target-libgloss ${libgcj}"
# always build newlib.
skipdirs=`echo " ${skipdirs} " | sed -e 's/ target-newlib / /'`
noconfigdirs="$noconfigdirs emacs emacs19 target-libgloss target-libffi"
;;
i[3456]86-*-beos*)
- noconfigdirs="$noconfigdirs gdb target-newlib target-libgloss"
+ noconfigdirs="$noconfigdirs gdb target-newlib target-libgloss ${libgcj}"
;;
- m68k-*-elf*)
+ m68hc11-*-*|m6811-*-*|m68hc12-*-*|m6812-*-*)
+ noconfigdirs="$noconfigdirs target-libiberty target-librx target-libg++ target-libstdc++ target-libio target-libf2c target-libchill target-zlib target-libobjc"
+ ;;
+ m68k-*-elf*)
if [ x${is_cross_compiler} != xno ] ; then
target_configdirs="${target_configdirs} target-bsp target-cygmon"
fi
;;
powerpc-*-aix*)
# copied from rs6000-*-* entry
- # The configure and build of ld are currently disabled because
- # GNU ld is known to be broken for AIX 4.2 and 4.3 (at least)
- # The symptom is that GDBtk 4.18 fails at startup with a segfault
- # if linked by GNU ld, but not if linked by the native ld.
- noconfigdirs="$noconfigdirs gprof cvssrc target-libgloss target-libffi ld"
- use_gnu_ld=no
+ use_gnu_ld=yes
;;
powerpc*-*-winnt* | powerpc*-*-pe* | ppc*-*-pe)
target_configdirs="$target_configdirs target-winsup"
noconfigdirs="$noconfigdirs target-newlib gprof cvssrc target-libffi"
;;
rs6000-*-aix*)
- # The configure and build of ld are currently disabled because
- # GNU ld is known to be broken for AIX 4.2 and 4.3 (at least)
- # The symptom is that GDBtk 4.18 fails at startup with a segfault
- # if linked by GNU ld, but not if linked by the native ld.
- noconfigdirs="$noconfigdirs gprof target-libffi ld"
- use_gnu_ld=no
+ noconfigdirs="$noconfigdirs gprof target-libffi"
+ use_gnu_ld=yes
;;
rs6000-*-*)
noconfigdirs="$noconfigdirs gprof target-libffi"
mips*-*-irix6*)
# The GNU assembler does not support IRIX 6.
# emacs is emacs 18, which does not work on Irix 5 (emacs19 does work)
- noconfigdirs="$noconfigdirs gas gprof emacs target-libgloss"
+ # Linking libjava exceeds command-line length limits on at least
+ # IRIX 6.2, but not on IRIX 6.5.
+ # Also, boehm-gc won't build on IRIX 6.5, according to Jeffrey Oldham
+ # <oldham@codesourcery.com>
+ noconfigdirs="$noconfigdirs gas gprof emacs target-libgloss ${libgcj}"
;;
mips*-dec-bsd*)
noconfigdirs="$noconfigdirs gprof target-libgloss target-libffi"
esac
noconfigdirs="$noconfigdirs target-libgloss target-libffi"
;;
+ sh64-*-*)
+ noconfigdirs="$noconfigdirs target-libgloss ${libgcj}"
+ ;;
sparc-*-elf*)
if [ x${is_cross_compiler} != xno ] ; then
target_configdirs="${target_configdirs} target-libstub target-cygmon"
if [ x${is_cross_compiler} != xno ] ; then
target_configdirs="${target_configdirs} target-libstub target-cygmon"
fi
- noconfigdirs="target-libffi"
+ noconfigdirs="$noconfigdirs target-libffi"
;;
sparclite-*-*)
if [ x${is_cross_compiler} != xno ] ; then
target_configdirs="${target_configdirs} target-bsp target-libstub target-cygmon"
fi
- noconfigdirs="target-libffi"
+ noconfigdirs="$noconfigdirs target-libffi"
;;
sparc-*-sunos4*)
if [ x${is_cross_compiler} != xno ] ; then
use_gnu_ld=no
fi
;;
+ sparc-*-solaris*)
+ case "${host}" in
+ sparc-*-solaris2.8)
+ # According to Gerald Pfeifer <pfeifer@dbai.tuwien.ac.at>, libjava
+ # won't build correctly on Solaris 8 if there's a
+ # previously-installed version of GCC in the configured prefix.
+ # This problem does not show up on earlier versions of Solaris.
+ noconfigdirs="$noconfigdirs ${libgcj}"
+ ;;
+ esac
+ ;;
v810-*-*)
noconfigdirs="$noconfigdirs bfd binutils gas gcc gdb ld ${libstdcxx_version} opcodes target-libgloss target-libffi"
;;
*-*-mpw*)
# Macs want a resource compiler.
configdirs="$configdirs grez"
- noconfigdirs="target-libffi"
+ noconfigdirs="$noconfigdirs target-libffi"
;;
esac
noconfigdirs="$noconfigdirs gas"
fi
+# Figure out what language subdirectories are present.
+# Look if the user specified --enable-languages="..."; if not, use
+# the environment variable $LANGUAGES if defined. $LANGUAGES might
+# go away some day.
+# NB: embedded tabs in this IF block -- do not untabify
+if test x"${enable_languages+set}" != xset; then
+ if test x"${LANGUAGES+set}" = xset; then
+ enable_languages="${LANGUAGES}"
+ echo configure.in: warning: setting LANGUAGES is deprecated, use --enable-languages instead 1>&2
+ else
+ enable_languages=all
+ fi
+else
+ if test x"${enable_languages}" = x ||
+ test x"${enable_languages}" = xyes;
+ then
+ echo configure.in: --enable-languages needs at least one language argument 1>&2
+ exit 1
+ fi
+fi
+enable_languages=`echo "${enable_languages}" | sed -e 's/[ ,][ ,]*/,/g' -e 's/,$//'`
+
+subdirs=
+for lang in ${srcdir}/gcc/*/config-lang.in ..
+do
+ case $lang in
+ ..) ;;
+ # The odd quoting in the next line works around
+ # an apparent bug in bash 1.12 on linux.
+ ${srcdir}/gcc/[*]/config-lang.in) ;;
+ *)
+ lang_alias=`sed -n -e 's,^language=['"'"'"'"]\(.*\)["'"'"'"'].*$,\1,p' -e 's,^language=\([^ ]*\).*$,\1,p' $lang`
+ this_lang_libs=`sed -n -e 's,^target_libs=['"'"'"'"]\(.*\)["'"'"'"'].*$,\1,p' -e 's,^target_libs=\([^ ]*\).*$,\1,p' $lang`
+ build_by_default=`sed -n -e 's,^build_by_default=['"'"'"'"]\(.*\)["'"'"'"'].*$,\1,p' -e 's,^build_by_default=\([^ ]*\).*$,\1,p' $lang`
+ if test "x$lang_alias" = x
+ then
+ echo "$lang doesn't set \$language." 1>&2
+ exit 1
+ fi
+ case ${build_by_default},${enable_languages}, in
+ *,$lang_alias,*) add_this_lang=yes ;;
+ no,*) add_this_lang=no ;;
+ *,all,*) add_this_lang=yes ;;
+ *) add_this_lang=no ;;
+ esac
+ if test x"${add_this_lang}" = xyes; then
+ eval target_libs='"$target_libs "'\"$this_lang_libs\"
+ else
+ eval noconfigdirs='"$noconfigdirs "'\"$this_lang_libs\"
+ fi
+ ;;
+ esac
+done
+
+
# Remove the entries in $skipdirs and $noconfigdirs from $configdirs and
# $target_configdirs.
# If we have the source for $noconfigdirs entries, add them to $notsupp.
case "${host}" in
sparc-sun-solaris2*)
CCBASE="`echo ${CC-cc} | sed 's/ .*$//'`"
- if [ "`/usr/bin/which $CCBASE`" = "/usr/ucb/cc" ] ; then
+ if [ "`type $CCBASE | sed 's/^[^/]*//'`" = "/usr/ucb/cc" ] ; then
could_use=
[ -d /opt/SUNWspro/bin ] && could_use="/opt/SUNWspro/bin"
if [ -d /opt/cygnus/bin ] ; then
esac
fi
-# Record target_configdirs and the configure arguments in Makefile.
+# Record target_configdirs and the configure arguments for target and
+# build configuration in Makefile.
target_configdirs=`echo "${target_configdirs}" | sed -e 's/target-//g'`
targargs=`echo "${arguments}" | \
sed -e 's/--no[^ ]*//' \
-e 's/--bu[a-z-]*=[^ ]*//' \
-e 's/--ta[a-z-]*=[^ ]*//'`
+# For the build-side libraries, we just need to pretend we're native,
+# and not use the same cache file. Multilibs are neither needed nor
+# desired.
+buildargs="--cache-file=../config.cache --build=${build_alias} --host=${build_alias} ${targargs}"
+
# Passing a --with-cross-host argument lets the target libraries know
# whether they are being built with a cross-compiler or being built
# native. However, it would be better to use other mechanisms to make the
targargs="--with-newlib ${targargs}"
fi
+# Pass the appropriate --host, --build, and --cache-file arguments.
+targargs="--cache-file=../config.cache --host=${target_alias} --build=${build_alias} ${targargs}"
+
# provide a proper gxx_include_dir.
# Note, if you change the default, make sure to fix both here and in
# the gcc, libio, and libstdc++ subdirectories.
fi
FLAGS_FOR_TARGET=
-if test -d ${topsrcdir}/gcc; then
- # Directories specified with -B are searched for libraries after those
- # specified with -L, but for headers (in sub-directory `include')
- # before those specified with -I and -isystem. Fortunately, we don't
- # expect include directories to exist in build_tooldir/{bin,lib} (see
- # below), and we want gcc/include to be searched first.
- FLAGS_FOR_TARGET=$FLAGS_FOR_TARGET' -B$$r/gcc/'
-fi
-
case " $skipdirs " in
*" target-newlib "*) ;;
*)
FLAGS_FOR_TARGET=$FLAGS_FOR_TARGET' -L$$r/$(TARGET_SUBDIR)/winsup -L$$r/$(TARGET_SUBDIR)/winsup/cygwin -L$$r/$(TARGET_SUBDIR)/winsup/w32api/lib -isystem $$s/winsup/include -isystem $$s/winsup/cygwin/include -isystem $$s/winsup/w32api/include -isystem $$s/newlib/libc/sys/cygwin -isystem $$s/newlib/libc/sys/cygwin32' ;;
esac
- # If we're using a pre-built compiler (which is the case for
- # Canadian crosses or when gcc isn't being built), don't discard
- # standard headers.
- if test "${build}" = "${host}" && test -d ${topsrcdir}/gcc; then
+ # If we're not building GCC, don't discard standard headers.
+ if test -d ${topsrcdir}/gcc; then
FLAGS_FOR_TARGET=$FLAGS_FOR_TARGET' -nostdinc'
+
+ if test "${build}" != "${host}"; then
+ # On Canadian crosses, CC_FOR_TARGET will have already been set
+ # by `configure', so we won't have an opportunity to add -Bgcc/
+ # to it. This is right: we don't want to search that directory
+ # for binaries, but we want the header files in there, so add
+ # them explicitly.
+ FLAGS_FOR_TARGET=$FLAGS_FOR_TARGET' -isystem $$r/gcc/include'
+
+ # Someone might think of using the pre-installed headers on
+ # Canadian crosses, in case the installed compiler is not fully
+ # compatible with the compiler being built. In this case, it
+ # would be better to flag an error than risking having
+ # incompatible object files being constructed. We can't
+ # guarantee that an error will be flagged, but let's hope the
+ # compiler will do it, when presented with incompatible header
+ # files.
+ fi
fi
- # If we're building newlib, use its generic headers last, but search
- # for any libc-related directories first (so make it the last -B
- # switch).
- FLAGS_FOR_TARGET=$FLAGS_FOR_TARGET' -B$$r/$(TARGET_SUBDIR)/newlib/ -isystem $$r/$(TARGET_SUBDIR)/newlib/targ-include -isystem $$s/newlib/libc/include'
+ case "${target}-${is_cross_compiler}" in
+ i[3456]86-pc-linux*-no)
+ # Here host == target, so we don't need to build gcc,
+ # so we don't want to discard standard headers.
+ FLAGS_FOR_TARGET=`echo " $FLAGS_FOR_TARGET " | sed -e 's/ -nostdinc / /'`
+ FLAGS_FOR_TARGET=$FLAGS_FOR_TARGET' -B$$r/$(TARGET_SUBDIR)/newlib/'
+ ;;
+ *)
+ # If we're building newlib, use its generic headers last, but search
+ # for any libc-related directories first (so make it the last -B
+ # switch).
+ FLAGS_FOR_TARGET=$FLAGS_FOR_TARGET' -B$$r/$(TARGET_SUBDIR)/newlib/ -isystem $$r/$(TARGET_SUBDIR)/newlib/targ-include -isystem $$s/newlib/libc/include'
+ ;;
+ esac
;;
esac
if test "x${CC_FOR_TARGET+set}" = xset; then
:
elif test -d ${topsrcdir}/gcc; then
- CC_FOR_TARGET='$$r/gcc/xgcc'
+ CC_FOR_TARGET='$$r/gcc/xgcc -B$$r/gcc/'
elif test "$host" = "$target"; then
CC_FOR_TARGET='$(CC)'
else
if test "x${CHILL_FOR_TARGET+set}" = xset; then
:
-elif test -d ${topsrcdir}/gcc &&
- echo ",${enable_languages-`echo ${LANGUAGES-CHILL} | tr ' ' ','`}," |
- grep ',CHILL,' > /dev/null ; then
- CHILL_FOR_TARGET='$$r/gcc/xgcc -L$$r/gcc/ch/runtime/'
+elif test -d ${topsrcdir}/gcc; then
+ CHILL_FOR_TARGET='$$r/gcc/xgcc -B$$r/gcc/ -L$$r/gcc/ch/runtime/'
elif test "$host" = "$target"; then
CHILL_FOR_TARGET='$(CC)'
else
if test "x${CXX_FOR_TARGET+set}" = xset; then
:
-elif test -d ${topsrcdir}/gcc &&
- echo ",${enable_languages-`echo ${LANGUAGES-c++} | tr ' ' ','`}," |
- grep ',c[+][+],' > /dev/null ; then
- CXX_FOR_TARGET='$$r/gcc/g++ -nostdinc++ '$libstdcxx_flags
+elif test -d ${topsrcdir}/gcc; then
+ # We add -shared-libgcc to CXX_FOR_TARGET whenever we use xgcc instead
+ # of g++ for linking C++ or Java, because g++ has -shared-libgcc by
+ # default whereas gcc does not.
+ CXX_FOR_TARGET='$$r/gcc/`case $$dir in libstdc++-v3 | libjava) echo xgcc -shared-libgcc ;; *) echo g++ ;; esac` -B$$r/gcc/ -nostdinc++ '$libstdcxx_flags
elif test "$host" = "$target"; then
CXX_FOR_TARGET='$(CXX)'
else
*' $(FLAGS_FOR_TARGET)') ;;
*) CXX_FOR_TARGET=$CXX_FOR_TARGET' $(FLAGS_FOR_TARGET)' ;;
esac
-qCXX_FOR_TARGET=`echo "$CXX_FOR_TARGET" | sed 's,&,\\\&,g'`
+qCXX_FOR_TARGET=`echo "$CXX_FOR_TARGET" | sed 's,[&%],\\\&,g'`
+
+# We want to defer the evaluation of `cmd`s and shell variables in
+# CXX_FOR_TARGET when recursing in the top-level Makefile, such as for
+# bootstrap. We'll enclose CXX_FOR_TARGET_FOR_RECURSIVE_MAKE in single
+# quotes, but we still have to duplicate `$'s so that shell variables
+# can be expanded by the nested make as shell variables, not as make
+# macros.
+qqCXX_FOR_TARGET=`echo "$qCXX_FOR_TARGET" | sed -e 's,[$][$],$$$$,g'`
-targargs="--cache-file=../config.cache --host=${target_alias} --build=${build_alias} ${targargs}"
sed -e "s:^TARGET_CONFIGDIRS[ ]*=.*$:TARGET_CONFIGDIRS = ${target_configdirs}:" \
- -e "s%^CONFIG_ARGUMENTS[ ]*=.*$%CONFIG_ARGUMENTS = ${targargs}%" \
+ -e "s%^TARGET_CONFIGARGS[ ]*=.*$%TARGET_CONFIGARGS = ${targargs}%" \
-e "s%^FLAGS_FOR_TARGET[ ]*=.*$%FLAGS_FOR_TARGET = ${FLAGS_FOR_TARGET}%" \
-e "s%^CC_FOR_TARGET[ ]*=.*$%CC_FOR_TARGET = ${CC_FOR_TARGET}%" \
-e "s%^CHILL_FOR_TARGET[ ]*=.*$%CHILL_FOR_TARGET = ${CHILL_FOR_TARGET}%" \
-e "s%^CXX_FOR_TARGET[ ]*=.*$%CXX_FOR_TARGET = ${qCXX_FOR_TARGET}%" \
+ -e "s%^CXX_FOR_TARGET_FOR_RECURSIVE_MAKE[ ]*=.*$%CXX_FOR_TARGET_FOR_RECURSIVE_MAKE = ${qqCXX_FOR_TARGET}%" \
-e "s%^TARGET_SUBDIR[ ]*=.*$%TARGET_SUBDIR = ${target_subdir}%" \
+ -e "s%^BUILD_SUBDIR[ ]*=.*$%BUILD_SUBDIR = ${build_subdir}%" \
+ -e "s%^BUILD_CONFIGARGS[ ]*=.*$%BUILD_CONFIGARGS = ${buildargs}%" \
-e "s%^gxx_include_dir[ ]*=.*$%gxx_include_dir=${gxx_include_dir}%" \
Makefile > Makefile.tem
rm -f Makefile
projects / deliverable / binutils-gdb.git / blobdiff