# these libraries are built for the target environment, and are built after
# the host libraries and the host tools (which may be a cross compiler)
#
-target_libs="libm xiberty libgloss newlib libio librx libstdc++ libg++"
+target_libs="xiberty libgloss newlib libio librx libstdc++ libg++"
# these tools are built using the target libs, and are intended to run only
## All tools belong in one of the four categories, and are assigned above
## We assign ${configdirs} this way to remove all embedded newlines. This
## is important because configure will choke if they ever get through.
+## ${configdirs} is directories we build using the host tools.
+## ${target_configdirs} is directories we build using the target tools.
#
-configdirs=`echo ${host_libs} ${host_tools} ${target_libs} ${target_tools}`
+configdirs=`echo ${host_libs} ${host_tools}`
+target_configdirs=`echo ${target_libs} ${target_tools}`
################################################################################
i[345]86-*-solaris2*) host_makefile_frag=config/mh-sysv4 ;;
i[345]86-*-aix*) host_makefile_frag=config/mh-aix386 ;;
i[345]86-*-go32*) host_makefile_frag=config/mh-go32 ;;
+ i[345]86-*-win32) host_makefile_frag=config/mh-i386win32 ;;
vax-*-ultrix2*) host_makefile_frag=config/mh-vaxult2 ;;
*-ibm-aix*) host_makefile_frag=config/mh-aix ;;
*-bull-bosx*) host_makefile_frag=config/mh-aix ;;
esac
fi
+# See if we can extract a definition of CC from the fragment.
+if [ -z "${CC}" ]; then
+ if [ -n "${host_makefile_frag}" -a -f "${srcdir}/${host_makefile_frag}" ]; then
+ CC=`sed -n -e 's/^[ ]*CC[ ]*=[ ]*\(.*\)$/\1/p' < ${srcdir}/${host_makefile_frag}`
+ fi
+fi
+
# The Solaris /usr/ucb/cc compiler does not appear to work.
case "${host}" in
sparc-sun-solaris2*)
could_use=
[ -d /opt/SUNWspro/bin ] && could_use="/opt/SUNWspro/bin"
if [ -d /opt/cygnus/bin ] ; then
- if [ "$could_use" == "" ] ; then
+ if [ "$could_use" = "" ] ; then
could_use="/opt/cygnus/bin"
else
could_use="$could_use or /opt/cygnus/bin"
powerpc-*-netware*) target_makefile_frag=config/mt-netware ;;
esac
+skipdirs=
gasdir=gas
use_gnu_ld=
use_gnu_as=
yes | "") # the default value for this tree is that X11 is available
;;
no)
- configdirs=`echo " ${configdirs} " | sed -e 's/ tk / /;/ gash / /'`
+ skipdirs="${skipdirs} tk gash"
;;
*)
echo "*** bad value \"${with_x}\" for -with-x flag; ignored" 1>&2
if [ x"${host}" = x"${target}" ] ; then
# when doing a native toolchain, don't build the targets
# that are in the 'cross only' list
- for i in ${cross_only} ; do
- configdirs=`echo " ${configdirs} " | sed -e "s/ $i / /"`
- done
+ skipdirs="${skipdirs} ${cross_only}"
is_cross_compiler=no
else
# similarly, don't build the targets in the 'native only'
# list when building a cross compiler
- for i in ${native_only} ; do
- configdirs=`echo " ${configdirs} " | sed -e "s/ $i / /"`
- done
+ skipdirs="${skipdirs} ${native_only}"
is_cross_compiler=yes
fi
# Recognize --with-newlib/--without-newlib.
if [ x${with_newlib} = xno ]; then
- configdirs=`echo " ${configdirs} " | sed -e 's/ newlib / /'`
+ skipdirs="${skipdirs} newlib"
elif [ x${with_newlib} = xyes ]; then
- configdirs=`echo " ${configdirs} " | sed -e 's/ newlib / /'`
- configdirs="${configdirs} newlib"
+ skipdirs=`echo " ${skipdirs} " | sed -e 's/ newlib / /'`
fi
# Handle ${copy_dirs}
# Configure extra directories which are host specific
case "${host}" in
- i[345]86-*-go32*)
- configdirs="$configdirs dosrel" ;;
+ i[345]86-*-go32*|i[345]86-*-win32*)
+ configdirs="$configdirs dosrel" ;;
esac
# Remove more programs from consideration, based on the host or
noconfigdirs=""
case "${host}" in
- i[345]86-*-netbsd*)
- noconfigdirs="tk fileutils"
- ;;
i[345]86-*-vsta)
noconfigdirs="tcl expect dejagnu make texinfo bison patch flex byacc send-pr gprof uudecode dejagnu diff"
;;
i[345]86-*-go32)
- noconfigdirs="tcl expect deja-gnu make texinfo bison patch flex byacc send-pr gprof uudecode dejagnu diff"
+ noconfigdirs="tcl tk expect dejagnu make texinfo bison patch flex byacc send-pr gprof uudecode dejagnu diff"
+ ;;
+ i[345]86-*-win32)
+ noconfigdirs="tk tcl expect diff make texinfo bison flex send-pr gprof gdb readline"
;;
esac
*-*-netware)
noconfigdirs="$noconfigdirs libg++ libstdc++ librx newlib xiberty"
;;
+ *-*-vxworks5.1)
+ noconfigdirs="$noconfigdirs newlib"
+ ;;
alpha-dec-osf*)
# ld works, but does not support shared libraries. emacs doesn't
- # work. newlib is not 64 bit ready. I'm not sure about emacs19,
- # fileutils or grep.
- noconfigdirs="$noconfigdirs ld emacs emacs19 fileutils grep newlib"
+ # work. newlib is not 64 bit ready. I'm not sure about fileutils or grep.
+ noconfigdirs="$noconfigdirs ld emacs fileutils grep newlib"
;;
alpha*-*-*)
# newlib is not 64 bit ready
# end-sanitize-arc
# start-sanitize-psion
arm-*-pe*)
- # Leave g++ for later.
- noconfigdirs="$noconfigdirs libg++ libstdc++ libio librx"
;;
# end-sanitize-psion
- arm-*-*)
+ arm-*-riscix*)
noconfigdirs="$noconfigdirs ld"
;;
h8300*-*-* | \
h8500-*-*)
noconfigdirs="$noconfigdirs libg++ libstdc++ libio librx"
;;
- hppa*-*-*elf*)
+ hppa*-*-*elf* | \
+ hppa*-*-lites*)
# Do configure ld/binutils/gas for this case.
;;
hppa*-*-*)
noconfigdirs="$noconfigdirs ld shellutils"
;;
i[345]86-*-go32)
- # add the go32 support tools to the list
# but don't build gdb
- configdirs=`echo go32 ${configdirs}`
noconfigdirs="$noconfigdirs gdb libg++ libstdc++ libio librx"
;;
+
+ i[345]86-*-win32)
+ # Can't build gdb for win32 target
+ noconfigdirs="$noconfigdirs gdb tk"
+ # but put newlib back
+ skipdirs=`echo " ${skipdirs} " | sed -e 's/ newlib / /'`
+ ;;
+ i[345]86-*-pe)
+ noconfigdirs="$noconfigdirs libg++ libstdc++ libio librx"
+ ;;
i[345]86-*-sco*)
noconfigdirs="$noconfigdirs gprof"
;;
# but that's okay since emacs doesn't work anyway
noconfigdirs="$noconfigdirs emacs emacs19"
;;
+# start-sanitize-jaguar
+ jaguar-*-*)
+ ;;
+# end-sanitize-jaguar
powerpc-*-aix*)
# copied from rs6000-*-* entry
- noconfigdirs="$noconfigdirs gas ld binutils gprof textutils cvs"
+ noconfigdirs="$noconfigdirs ld gprof textutils cvs"
+ ;;
+ powerpc*-*-winnt* | powerpc*-*-pe*)
+ noconfigdirs="$noconfigdirs ld gdb"
;;
rs6000-*-lynxos*)
# a gcc built textutils will cause the linker to hang on 'join'
# The CVS server code doesn't work on the RS/6000
# Newlib makes problems for libg++ in crosses.
- noconfigdirs="$noconfigdirs gas ld newlib gprof textutils cvs"
+ noconfigdirs="$noconfigdirs ld newlib gprof textutils cvs"
use_gnu_ld=no
use_gnu_as=no
;;
rs6000-*-*)
# a gcc built textutils will cause the linker to hang on 'join'
- noconfigdirs="$noconfigdirs gas ld binutils gprof textutils"
+ noconfigdirs="$noconfigdirs ld gprof textutils"
+ ;;
+ m68k-*-netbsd*)
+ noconfigdirs="$noconfigdirs gdb"
;;
m68k-apollo-*)
noconfigdirs="$noconfigdirs ld binutils gprof"
noconfigdirs="$noconfigdirs gprof"
;;
mips*-*-bsd*)
- noconfigdirs="$noconfigdirs gprof ld"
+ noconfigdirs="$noconfigdirs gprof"
;;
mips*-*-*)
noconfigdirs="$noconfigdirs gprof"
;;
romp-*-*)
- noconfigdirs="bfd binutils ld gas opcodes"
+ noconfigdirs="$noconfigdirs bfd binutils ld gas opcodes"
;;
sh-*-*)
case "${host}" in
i[345]86-*-vsta) ;; # don't add gprof back in
- *) configdirs=`echo gprof ${configdirs}` ;;
i[345]86-*-go32) ;; # don't add gprof back in
- *) configdirs=`echo gprof ${configdirs}` ;;
+ *) skipdirs=`echo " ${skipdirs} " | sed -e 's/ gprof / /'` ;;
esac
;;
sparc-*-sunos4*)
use_gnu_ld=no
fi
;;
+ v810-*-*)
+ noconfigdirs="$noconfigdirs bfd binutils gas gcc gdb ld libg++ libstdc++ opcodes"
+ ;;
vax-*-vms)
noconfigdirs="$noconfigdirs bfd binutils gdb ld newlib opcodes"
;;
;;
esac
-# Remove the entries in $noconfigdirs from $configdirs. If we have the
-# source for them, add them to $notsupp.
+# Remove the entries in $skipdirs and $noconfigdirs from $configdirs and
+# $target_configdirs.
+# If we have the source for $noconfigdirs entries, add them to $notsupp.
notsupp=""
-for dir in . $noconfigdirs ; do
+for dir in . $skipdirs $noconfigdirs ; do
if [ $dir != . ] && echo " ${configdirs} " | grep " ${dir} " >/dev/null 2>&1; then
configdirs=`echo " ${configdirs} " | sed -e "s/ ${dir} / /"`
if [ -r $srcdir/$dir/configure ] || [ -r $srcdir/$dir/configure.in ]; then
- notsupp="$notsupp $dir"
+ if echo " ${skipdirs} " | grep " ${dir} " >/dev/null 2>&1; then
+ true
+ else
+ notsupp="$notsupp $dir"
+ fi
+ fi
+ fi
+ if [ $dir != . ] && echo " ${target_configdirs} " | grep " ${dir} " >/dev/null 2>&1; then
+ target_configdirs=`echo " ${target_configdirs} " | sed -e "s/ ${dir} / /"`
+ if [ -r $srcdir/$dir/configure ] || [ -r $srcdir/$dir/configure.in ]; then
+ if echo " ${skipdirs} " | grep " ${dir} " >/dev/null 2>&1; then
+ true
+ else
+ notsupp="$notsupp $dir"
+ fi
fi
fi
done
+# Deconfigure all subdirectories, in case we are changing the
+# configuration from one where a subdirectory is supported to one where it
+# is not.
+if [ -z "${norecursion}" ]; then
+ for i in ${configdirs} ${target_configdirs}; do
+ rm -f $i/Makefile
+ done
+fi
+
# Produce a warning message for the subdirs we can't configure.
# This isn't especially interesting in the Cygnus tree, but in the individual
# FSF releases, it's important to let people know when their machine isn't
# pretend that all is well.)
if [ -n "$appdirs" ]; then
for dir in $appdirs ; do
- if [ -r $dir/Makefile.in ] && echo " ${configdirs} " | grep " ${dir} " >/dev/null 2>&1 ; then
- appdirs=""
- break
+ if [ -r $dir/Makefile.in ]; then
+ if echo " ${configdirs} " | grep " ${dir} " >/dev/null 2>&1; then
+ appdirs=""
+ break
+ fi
+ if echo " ${target_configdirs} " | grep " ${dir} " >/dev/null 2>&1; then
+ appdirs=""
+ break
+ fi
fi
done
if [ -n "$appdirs" ]; then
esac
fi
+# post-target:
+
+# Record target_configdirs and the configure arguments in Makefile.
+targargs=`echo "${arguments}" | \
+ sed -e 's/--*norecursion//' \
+ -e 's/--*cache[a-z-]*=[^ ]*//' \
+ -e 's/--*cache[a-z-]*[ ][ ]*[^ ]*//'`
+sed -e "s:^TARGET_CONFIGDIRS[ ]*=.*$:TARGET_CONFIGDIRS = ${target_configdirs}:" \
+ -e "s%^CONFIG_ARGUMENTS[ ]*=.*$%CONFIG_ARGUMENTS = ${targargs}%" \
+ Makefile > Makefile.tem
+rm -f Makefile
+mv -f Makefile.tem Makefile
+
#
# Local Variables:
# fill-column: 131
projects / deliverable / binutils-gdb.git / blobdiff