# these libraries are used by various programs built for the host environment
#
-host_libs="mmalloc libiberty opcodes bfd readline gash tcl tk tclX"
+host_libs="mmalloc libiberty opcodes bfd readline gash db tcl tk tclX itcl"
if [ "${enable_gdbgui}" = "yes" ] ; then
host_libs="${host_libs} libgui"
fi
# these tools are built for the host environment
-#
-host_tools="texinfo byacc flex bison binutils ld gas gcc gdb make patch
- prms send-pr gprof gdbtest tgas etc expect dejagnu sim
- m4 autoconf ispell grep diff rcs cvs fileutils shellutils
- textutils wdiff find emacs emacs19 uudecode hello tar gzip indent
- recode release sed utils guile perl apache inet"
+# Note, the powerpc-eabi build depends on sim occurring before gdb in order to
+# know that we are building the simulator.
+host_tools="texinfo byacc flex bison binutils ld gas gcc sim gdb make patch prms send-pr gprof gdbtest tgas etc expect dejagnu bash m4 autoconf ispell grep diff rcs cvs fileutils shellutils time textutils wdiff find emacs emacs19 uudecode hello tar gzip indent recode release sed utils guile perl apache inet gawk findutils sn"
# these libraries are built for the target environment, and are built after
# directories to be built in the native environment only
#
-native_only="autoconf cvs emacs emacs19 fileutils find grep gzip hello
- indent ispell m4 rcs recode sed shellutils tar textutils gash
- uudecode wdiff gprof target-groff guile perl apache inet"
+# This must be a single line because of the way it is searched by grep in
+# the code below.
+native_only="autoconf cvs emacs emacs19 fileutils find gawk grep gzip hello indent ispell m4 rcs recode sed shellutils tar textutils gash uudecode wdiff gprof target-groff guile perl apache inet time bash prms sn"
# directories to be built in a cross environment only
#
m68k-hp-hpux*) host_makefile_frag=config/mh-hp300 ;;
m68k-apollo-sysv*) host_makefile_frag=config/mh-apollo68 ;;
m68k-apollo-bsd*) host_makefile_frag=config/mh-a68bsd ;;
- m68k-*-linux*) host_makefile_frag=config/mh-linux ;;
m88k-dg-dgux*) host_makefile_frag=config/mh-dgux ;;
m88k-harris-cxux*) host_makefile_frag=config/mh-cxux ;;
m88k-motorola-sysv*) host_makefile_frag=config/mh-delta88;;
mips*-dec-ultrix*) host_makefile_frag=config/mh-decstation ;;
mips*-nec-sysv4*) host_makefile_frag=config/mh-necv4 ;;
- mips*-sgi-irix[56]*) host_makefile_frag=config/mh-irix5 ;;
+ mips*-sgi-irix6*) host_makefile_frag=config/mh-irix6 ;;
+ mips*-sgi-irix5*) host_makefile_frag=config/mh-irix5 ;;
mips*-sgi-irix4*) host_makefile_frag=config/mh-irix4 ;;
mips*-sgi-irix3*) host_makefile_frag=config/mh-sysv ;;
mips*-*-sysv4*) host_makefile_frag=config/mh-sysv4 ;;
mips*-*-sysv*) host_makefile_frag=config/mh-riscos ;;
- i[345]86-ncr-sysv4.3) host_makefile_frag=config/mh-ncrsvr43 ;;
- i[345]86-ncr-sysv4*) host_makefile_frag=config/mh-ncr3000 ;;
- i[345]86-*-sco3.2v5*) host_makefile_frag=config/mh-sysv ;;
- i[345]86-*-sco*) host_makefile_frag=config/mh-sco ;;
- i[345]86-*-isc*) host_makefile_frag=config/mh-sysv ;;
- i[345]86-*-linux*) host_makefile_frag=config/mh-linux ;;
- i[345]86-*-solaris2*) host_makefile_frag=config/mh-sysv4 ;;
- i[345]86-*-aix*) host_makefile_frag=config/mh-aix386 ;;
- i[345]86-*-go32*) host_makefile_frag=config/mh-go32 ;;
+ i[3456]86-*-dgux*) host_makefile_frag=config/mh-dgux386 ;;
+ i[3456]86-ncr-sysv4.3) host_makefile_frag=config/mh-ncrsvr43 ;;
+ i[3456]86-ncr-sysv4*) host_makefile_frag=config/mh-ncr3000 ;;
+ i[3456]86-*-sco3.2v5*) host_makefile_frag=config/mh-sysv ;;
+ i[3456]86-*-sco*) host_makefile_frag=config/mh-sco ;;
+ i[3456]86-*-isc*) host_makefile_frag=config/mh-sysv ;;
+ i[3456]86-*-solaris2*) host_makefile_frag=config/mh-sysv4 ;;
+ i[3456]86-*-aix*) host_makefile_frag=config/mh-aix386 ;;
+ i[3456]86-*-go32*) host_makefile_frag=config/mh-go32 ;;
*-cygwin32*) host_makefile_frag=config/mh-cygwin32 ;;
+ *-windows*) host_makefile_frag=config/mh-windows ;;
vax-*-ultrix2*) host_makefile_frag=config/mh-vaxult2 ;;
*-*-solaris2*) host_makefile_frag=config/mh-solaris ;;
m68k-sun-sunos*) host_makefile_frag=config/mh-sun3 ;;
waugh=
case "${host}" in
hppa*) waugh=config/mh-papic ;;
- i[345]86-*) waugh=config/mh-x86pic ;;
+ i[3456]86-*) waugh=config/mh-x86pic ;;
sparc64-*) waugh=config/mh-sparcpic ;;
*) waugh=config/mh-${host_cpu}pic ;;
esac
case "${target}" in
v810*) target_makefile_frag=config/mt-v810 ;;
- i[345]86-*-netware*) target_makefile_frag=config/mt-netware ;;
+ i[3456]86-*-netware*) target_makefile_frag=config/mt-netware ;;
+# start-sanitize-r5900
+ mips64vr5900*-*-*) target_makefile_frag=config/mt-r5900 ;;
+# end-sanitize-r5900
powerpc-*-netware*) target_makefile_frag=config/mt-netware ;;
esac
# Default to using --with-stabs for certain targets.
if [ x${with_stabs} = x ]; then
case "${target}" in
- mips*-*-* | alpha*-*-osf* | i[345]86*-*-sysv4* | i[345]86*-*-unixware*)
+ mips*-*-irix6*)
+ ;;
+ mips*-*-* | alpha*-*-osf* | i[3456]86*-*-sysv4* | i[3456]86*-*-unixware*)
with_stabs=yes;
withoptions="${withoptions} --with-stabs"
;;
# Configure extra directories which are host specific
case "${host}" in
- i[345]86-*-go32*)
+ i[3456]86-*-go32*)
configdirs="$configdirs dosrel" ;;
*-cygwin32*)
configdirs="$configdirs dosrel" ;;
noconfigdirs=""
case "${host}" in
- i[345]86-*-vsta)
- noconfigdirs="tcl expect dejagnu make texinfo bison patch flex byacc send-pr gprof uudecode dejagnu diff guile perl apache inet"
+ i[3456]86-*-vsta)
+ noconfigdirs="tcl expect dejagnu make texinfo bison patch flex byacc send-pr gprof uudecode dejagnu diff guile perl apache inet itcl db sn"
;;
- i[345]86-*-go32)
- noconfigdirs="tcl tk expect dejagnu make texinfo bison patch flex byacc send-pr gprof uudecode dejagnu diff guile perl apache inet"
+ i[3456]86-*-go32)
+ noconfigdirs="tcl tk expect dejagnu make texinfo bison patch flex byacc send-pr gprof uudecode dejagnu diff guile perl apache inet itcl db sn"
;;
*-*-cygwin32)
- noconfigdirs="patch diff tk tcl expect dejagnu cvs autoconf texinfo bison send-pr gprof rcs guile perl apache inet"
+ noconfigdirs="expect dejagnu cvs autoconf bison send-pr gprof rcs guile perl texinfo apache inet itcl db sn"
+ ;;
+ *-*-windows*)
+# This is only used to build WinGDB...
+ configdirs="bfd gdb libiberty opcodes readline sim"
+ target_configdirs=
;;
ppc*-*-pe)
- noconfigdirs="patch diff make tk tcl expect dejagnu cvs autoconf texinfo bison send-pr gprof rcs guile perl apache inet"
+ noconfigdirs="patch diff make tk tcl expect dejagnu cvs autoconf texinfo bison send-pr gprof rcs guile perl apache inet itcl db sn"
;;
esac
*-*-vxworks*)
noconfigdirs="$noconfigdirs target-newlib target-libgloss"
;;
- *-*-ose)
- noconfigdirs="$noconfigdirs target-libgloss"
- ;;
alpha-dec-osf*)
# ld works, but does not support shared libraries. emacs doesn't
# work. newlib is not 64 bit ready. I'm not sure about fileutils or grep.
arm-*-pe*)
noconfigdirs="$noconfigdirs target-libgloss"
;;
+ arm-*-coff*)
+ noconfigdirs="$noconfigdirs target-libgloss"
+ ;;
arm-*-riscix*)
noconfigdirs="$noconfigdirs ld target-libgloss"
;;
+ d10v-*-*)
+ noconfigdirs="$noconfigdirs target-librx target-libg++ target-libstdc++ target-libio target-libgloss"
+ ;;
+# start-sanitize-d30v
+ d30v-*-*)
+ noconfigdirs="$noconfigdirs tcl tk expect gcc gdb newlib target-librx target-libg++ target-libstdc++ target-libio target-libgloss itcl db sn target-libiberty target-newlib target-examples"
+ ;;
+# end-sanitize-d30v
h8300*-*-* | \
h8500-*-*)
noconfigdirs="$noconfigdirs target-libg++ target-libstdc++ target-libio target-librx target-libgloss"
esac
noconfigdirs="$noconfigdirs ld shellutils"
;;
- i[345]86-*-go32)
+ i[3456]86-*-go32)
# but don't build gdb
noconfigdirs="$noconfigdirs gdb target-libg++ target-libstdc++ target-libio target-librx"
;;
*-*-cygwin32)
target_configdirs="$target_configdirs target-winsup"
- noconfigdirs="$noconfigdirs tcl tk expect target-libgloss"
+ noconfigdirs="$noconfigdirs expect target-libgloss itcl db sn"
# always build newlib.
skipdirs=`echo " ${skipdirs} " | sed -e 's/ target-newlib / /'`
*) noconfigdirs="$noconfigdirs gdb"
esac
;;
- i[345]86-*-pe)
+ i[3456]86-*-pe)
noconfigdirs="$noconfigdirs target-libg++ target-libstdc++ target-libio target-librx target-libgloss"
;;
- i[345]86-*-sco3.2v5*)
+ i[3456]86-*-sco3.2v5*)
# The linker does not yet know about weak symbols in COFF,
# and is not configured to handle mixed ELF and COFF.
noconfigdirs="$noconfigdirs gprof ld target-libgloss"
;;
- i[345]86-*-sco*)
+ i[3456]86-*-sco*)
noconfigdirs="$noconfigdirs gprof target-libgloss"
;;
- i[345]86-*-solaris2*)
+ i[3456]86-*-solaris2*)
# The linker does static linking correctly, but the Solaris C library
# has bugs such that some important functions won't work when statically
# linked. (See man pages for getpwuid, for example.)
noconfigdirs="$noconfigdirs ld target-libgloss"
;;
- i[345]86-*-sysv4*)
+ i[3456]86-*-sysv4*)
# The SYSV4 C compiler doesn't handle Emacs correctly
case "${CC}" in
"" | cc*) noconfigdirs="$noconfigdirs emacs emacs19" ;;
# but that's okay since emacs doesn't work anyway
noconfigdirs="$noconfigdirs emacs emacs19 target-libgloss"
;;
+ mn10200-*-*)
+ noconfigdirs="$noconfigdirs target-libgloss"
+ ;;
+ mn10300-*-*)
+ noconfigdirs="$noconfigdirs target-libgloss"
+ ;;
powerpc-*-aix*)
# copied from rs6000-*-* entry
noconfigdirs="$noconfigdirs gprof cvs target-libgloss"
;;
powerpc*-*-winnt* | powerpc*-*-pe* | ppc*-*-pe)
target_configdirs="$target_configdirs target-winsup"
- noconfigdirs="$noconfigdirs gdb tcl tk make expect target-libgloss"
+ noconfigdirs="$noconfigdirs gdb tcl tk make expect target-libgloss itcl db sn"
# always build newlib.
skipdirs=`echo " ${skipdirs} " | sed -e 's/ target-newlib / /'`
;;
# This is temporary until we can link against shared libraries
powerpcle-*-solaris*)
- noconfigdirs="$noconfigdirs gdb sim make tcl tk expect"
+ noconfigdirs="$noconfigdirs gdb sim make tcl tk expect itcl db sn"
;;
rs6000-*-lynxos*)
# The CVS server code doesn't work on the RS/6000
mips*-*-irix6*)
# The GNU linker does not support shared libraries.
# emacs is emacs 18, which does not work on Irix 5 (emacs19 does work)
- # BFD does not have Irix 6 support yet.
- noconfigdirs="$noconfigdirs bfd binutils ld gas opcodes gdb readline mmalloc sim gprof emacs target-libgloss"
+ noconfigdirs="$noconfigdirs ld gas gprof emacs target-libgloss"
;;
mips*-dec-bsd*)
noconfigdirs="$noconfigdirs gprof target-libgloss"
;;
sh-*-*)
case "${host}" in
- i[345]86-*-vsta) ;; # don't add gprof back in
- i[345]86-*-go32) ;; # don't add gprof back in
+ i[3456]86-*-vsta) ;; # don't add gprof back in
+ i[3456]86-*-go32) ;; # don't add gprof back in
*) skipdirs=`echo " ${skipdirs} " | sed -e 's/ gprof / /'` ;;
esac
noconfigdirs="$noconfigdirs target-libgloss"
use_gnu_ld=no
fi
;;
+# start-sanitize-tic80
+ tic80-*-*)
+ noconfigdirs="$noconfigdirs gdb"
+ ;;
+# end-sanitize-tic80
v810-*-*)
noconfigdirs="$noconfigdirs bfd binutils gas gcc gdb ld target-libio target-libg++ target-libstdc++ opcodes target-libgloss"
;;
+# start-sanitize-v850
+ v850-*-*)
+ noconfigdirs="$noconfigdirs target-libgloss"
+ ;;
+# end-sanitize-v850
vax-*-vms)
noconfigdirs="$noconfigdirs bfd binutils gdb ld target-newlib opcodes target-libgloss"
;;
# If we are building a Canadian Cross, discard tools that can not be built
# using a cross compiler. FIXME: These tools should be fixed.
if [ "${build}" != "${host}" ]; then
- noconfigdirs="$noconfigdirs tcl tk expect dejagnu texinfo"
+ noconfigdirs="$noconfigdirs expect dejagnu itcl db sn"
fi
# Make sure we don't let GNU ld be added if we didn't want it.
fi
fi
+# If using newlib, add --with-newlib to the withoptions so that gcc/configure
+# can detect this case.
+
+if [ x${with_newlib} != xno ] && echo " ${target_configdirs} " | grep " target-newlib " > /dev/null 2>&1 && [ -d ${srcdir}/newlib ] ; then
+ with_newlib=yes
+ withoptions="$withoptions --with-newlib"
+fi
+
if [ x${shared} = xyes ]; then
case "${target}" in
hppa*) target_makefile_frag=config/mt-papic ;;
- i[345]86-*) target_makefile_frag=config/mt-x86pic ;;
+ i[3456]86-*) target_makefile_frag=config/mt-x86pic ;;
*) target_makefile_frag=config/mt-${target_cpu}pic ;;
esac
fi
projects / deliverable / binutils-gdb.git / blobdiff