\input texinfo @c -*-para-*-
+@c %**start of header
@setfilename configure.info
@settitle Cygnus Configure
+@c %**end of header
+@c @setchapternewpage odd
-@node top, What Configure Does, (dir), (dir)
+@titlepage
+@sp 10
+@title{Cygnus Configure}
+@author{K. Richard Pixley}
+@page
+@vskip 0pt plus 1filll
+Copyright @copyright{} 1991 Cygnus Support
+@end titlepage
+
+@ifinfo
+This document attempts to describe the configuration system used and
+distributed by Cygnus Support.
+
+Copyright @copyright{} 1991 Cygnus Support
+@end ifinfo
+
+@ifinfo
+@node top, Invoking, (dir), (dir)
+@top top
This file documents the configuration system used and distributed by
Cygnus Support.
+NOTE: support for a Cygnus experimental option, @code{-subdirs} is at
+least temporarily suspended. Most of the code is still in configure but
+the option is disabled. This document describes that feature, but those
+parts are prominently marked with NOTE's like this one. FIXME-soon
+
@menu
-* What Configure Does:: What Configure Does
* Invoking:: Invoking
-* How It Does It:: How It Does It
-* Canonical Triples And Config.Subr:: Canonical Triples And Config.Subr
+* Using Configure:: Using Configure
+* What Configure Does:: What Configure Does
+* Porting:: Porting with Configure
+* Known Bugs:: Known Bugs
+* Variables Index:: Variable Index
+* Concept Index:: Concept Index
+
+ --- The Detailed Node Listing ---
+
+Using Configure
+
+* Install Locations:: Where to install things once they are built
+* Build Directories:: Where to build object files
+* Host:: Telling @code{configure} what will source will
+ be built
+* Target:: Telling @code{configure} what the source will
+ target
+* Local Conventions:: Adding information about local conventions
+
+Install Locations
+
+* prefix:: Changing the default install directory
+* datadir:: How to separate host independent files
+ from host dependent files when
+ installing for multiple hosts
+* Install Details:: Full descriptions of all installation
+ subdirectories
+
+Porting with Configure
+
* Native Ports:: Native Ports
* Adding Hosts Or Targets:: Adding Hosts Or Targets
+* Reference:: Reference
+
+Native Ports
+
+* Add A Host:: Add A Host
+* Port An Existing Target:: Port An Existing Target
+* Add A Target:: Add A Target
+* Build Host & Target:: Build Host & Target
+* Build New Target On Some Other Host:: Build New Target On Some Other Host
+
+Adding Hosts Or Targets
+
+* Add Canonical Triple To Config.Subr (Cf Config.Subr):: Add Canonical Triple To Config.Subr (Cf Config.Subr)
+* (Optional) Add Alias (Cf Config.Subr)::
+* Monte Carlo - Configure ; Make:: Monte Carlo - Configure ; Make
+* Remedies:: Remedies
* Adding Configure To Existing Programs:: Adding Configure To Existing Programs
+
+Remedies
+
+* Automagic Config:: Automagic Config
+* Symlinked Files:: Symlinked Files
+* Makefile Fragments (Cf Configure.In):: Makefile Fragments (Cf Configure.In)
+
+Adding Configure To Existing Programs
+
* Makefile Support:: Makefile Support
-* Known Bugs:: Known Bugs
+* Add Standard Macros (Template Follows):: Add Standard Macros (Template Follows)
+
+Adding Configure To Existing Programs
+
+* Makefile Host Support - Move It To Host Fragments:: Makefile Host Support - Move It To Host Fragments
@end menu
+@end ifinfo
-@node What Configure Does, Invoking, top, top
+@node Invoking, Using Configure, top, top
@chapter Invoking
The usual way to invoke @code{configure} is as follows:
@file{/usr/local}.
NOTE: support for multiple hosts is at least temporarily suspended.
+FIXME-soon
If more than one host is specified on the command line, then
configurations are created for each and @code{-subdirs} is assumed.
Displays a quick summary of how to invoke @code{configure}.
@item -host=@var{host}
-FIXME: I don't think this option should be documented.
+FIXME-soon: I don't think this option should be documented.
+
+NOTE: support for this @code{-namesubdir=} is at least temporary
+suspended. FIXME-soon
@item -namesubdir=@var{name}
Asks that any subdirectories created by the @code{-subdirs} option be
named @var{name}. Note that using multiple hosts with
@code{-namesubdir=} isn't terribly useful.
-NOTE: support for this option is at least temporary suspended.
-
@item -nfp
Notifies @code{configure} that all of the specified hosts have @emph{no
floating point} units.
Asks @code{configure} to configure only this directory. Any
subdirectories are ignored. This is used by the executable shell script
@file{config.status} to reconfigure the current directory.
-(@xref{FIXME:config.status}.
+(@xref{FIXME-now:config.status}.
@item -objdir=@var{dir}
-Asks @code{configure} to create the build tree in @var{dir}. The
-default is to use the source tree as the build tree. The source
-directory is assumed to be @file{.}.
-
-NOTE: support for this option is at least temporary suspended.
+This option is no longer supported. Use @code{-srcdir=} instead.
@item -prefix=@var{dir}
This option requests that the source be configured so that programs and
@item -site=@var{site}
Asks that Makefiles be generated using site specific Makefiles for
-@var{site}. (@xref{FIXME: site specific Makefiles}.)
+@var{site}. (@xref{FIXME-now: site specific Makefiles}.)
@item -srcdir=@var{_dir}
Tells @code{configure} that the sources are located in @var{dir}. The
build directory is assumed to be @file{.}.
+NOTE: support for this @code{-subdirs} is at least temporary suspended.
+FIXME-soon
+
@item -subdirs
Asks that configurations be placed in subdirectories named
@file{H-@var{host}} of each build directory, for each host specified.
If this configuration is not native, (@var{host} is not @var{target}),
then he subdir will be named @file{X-@var{host}-@var{target}} instead.
-NOTE: support for this option is at least temporary suspended.
+NOTE: support for multiple targets is at least temporarily suspended.
+FIXME-soon
@item -target=@var{target}
Requests that the sources be configured to target the @var{target}
to be the same as the host. If multiple targets are specified,
configurations for each are created and @code{-subdirs} is assumed.
-NOTE: support for multiple targets is at least temporarily suspended.
-
@item -tmpdir=@var{tmpdir}
Sets the directory in which @code{configure} creates temporary files to
@var{tmpdir}.
@end table
-@node Using Configure, Canonical Triples And Config.Subr, Invoking, top
+@node Using Configure, What Configure Does, Invoking, top
@chapter Using Configure
Configure prepares source directories in anticipation of building.
@menu
* Install Locations:: Where to install things once they are built
* Build Directories:: Where to build object files
-* Host:: Host
-* Target:: Target
-* Local Conventions:: Local Conventions
+* Host:: Telling @code{configure} what will source will
+ be built
+* Target:: Telling @code{configure} what the source will
+ target
+* Local Conventions:: Adding information about local conventions
@end menu
-@node Install Locations, Build Directories, What Configure Does, What Configure Does
+@node Install Locations, Build Directories, Using Configure, Using Configure
@section Install Locations
@cindex Where to install
probably correct for native tools installed on only one host.
@menu
-* prefix:: Changing the default install directory
-* datadir:: How to separate host independent files
+* prefix:: Changing the default install directory
+* datadir:: How to separate host independent files
from host dependent files when
installing for multiple hosts
-* Install Details:: Full descriptions of all installation
+* Install Details:: Full descriptions of all installation
subdirectories
@end menu
@subsection Changing the default install directory
@cindex Changing the default install directory
-@cindex The prefix directory
+@cindex Prefix directory
In the default configuration, all files are installed in subdirectories
of @file{/usr/local}. The actual location is determined by the value of
independent files installed for @var{host1}. This results in a single
copy of the host independent files suitable for use by both hosts.
+NOTE: support for -subdirsa and multiple hosts is at least temporarily
+suspended. FIXME-soon
+
+Previously this was:
+
+@example
+configure @var{host1} @var{host2} -prefix=/usr/gnu
+@end example
@node Install Details, , datadir, Install Locations
@subsection Full descriptions of all installation subdirectories
@cite{standards.text}.
Note that @code{configure} does not create @code{srcdir} at any time.
-This is not an installation directory. (@xref{}.)
+The directory @code{srcdir} is not an installation directory.
+(@xref{FIXME-now}.)
All makefile variables can be overridden on the command line to
@code{make}. (See @xref{Overriding, Overriding Variables, Overriding
risk ending up with a broken installation. This is because many
programs have the locations of other programs or files compiled into
them. If you find yourself overriding any of the variables frequently,
-you should consider site depedent Makefile fragments. (See @xref{}.)
+you should consider site depedent Makefile fragments. (See @xref{FIXME-now}.)
During @code{make install}, the following standard directories will be
created and populated:
The makefile variable manext is not supported by the @code{configure}.
The @sc{gnu} coding standards do not call for @code{man1ext},
@code{man2ext}, so the intended use for @code{manext} is not clear.
-(See also @xref{FIXME:extensions}.)
+(See also @xref{FIXME-now:extensions}.)
@end defvr
@vindex infodir
@code{docdir} is normally changed only indirectly through @code{prefix}.
The default value for @code{docdir} is @code{datadir}@file{/doc}. Note
that this variable is an extension to the @sc{gnu} coding standards.
-(See also @xref{FIXME:extensions}.)
+(See also @xref{FIXME-now:extensions}.)
@end defvr
@vindex includedir
@end defvr
-@node Build Directories, Host, Install Locations, What Configure Does
+@node Build Directories, Host, Install Locations, Using Configure
@section Build Directories
+@cindex Build directories
+@cindex objdir
+@cindex Object directories
+@cindex subdirs
+@cindex Building for multiple hosts
+@cindex Building for multiple targets
-@node Host, Target, Build Directories, What Configure Does
-@section Host
-
-
-@node Target, Local Conventions, Host, What Configure Does
-@section Target
-
-
-@node Local Conventions, , Target, What Configure Does
-@section Local Conventions
-
-
-
-@node How It Does It, How It Does It, What Configure Does, top
-@chapter How It Does It
-
-When configure runs, it does the following things.
-
-@itemize @bullet
-
-@item Create Directories
-When configure is run with either of the
-
-@itemize @minus
-@item Parallels Source Tree (If -Srcdir)
-@item Adds Subdirs (If -Subdir)
-@end itemize
+Normally, @code{configure} builds @file{Makefile}'s and symbolic links
+in the same directory as the source files. This is the typical
+@sc{un*x} way to build programs but it has limitations. For instance,
+using this approach, you can only build for one host at a time.
-@item Generates Makefiles
-@item Generates .Gdbinit
-@item Makes Symlinks
-@item Misc (Usually File Editting)
-@item generates config.status
-@end itemize
+We refer to the directories in which @code{configure} builds
+@file{Makefile}'s as the @emph{build directories} or sometimes as
+@emph{objdir} because these are the directories in which @code{make}
+will build object files, among other things.
-@node Canonical Triples And Config.Subr, Native Ports, How It Does It, top
-@chapter Canonical Triples And Config.Subr
+The default build directory is the same as the source directory.
+You can change the build directory with a sequence like the following:
-@menu
-* Config.Subr Calling Convention:: Config.Subr Calling Convention
-* Definition Of Canonical Triples:: Definition Of Canonical Triples
-* Maps Aliases To Canonical Triples:: Maps Aliases To Canonical Triples
-* Validates Canonical Triples:: Validates Canonical Triples
-@end menu
+@example
+mkdir @var{builddir}
+cd @var{builddir}
+configure @var{host} -srcdir=@var{sourcedirectory}
+@example
-@node Config.Subr Calling Convention, Definition Of Canonical Triples, Canonical Triples And Config.Subr, Canonical Triples And Config.Subr
-@section Config.Subr Calling Convention
+where @var{builddir} is the directory in which you wish to build,
+@var{host} is the host for which you want to build, and
+@var{sourcedirectory} is the directory containing the source files.
+If you were to do this twice with different values for @var{builddir}
+and @vr{host}, then you could @code{make} for both at the same time.
-@node Definition Of Canonical Triples, Maps Aliases To Canonical Triples, Config.Subr Calling Convention, Canonical Triples And Config.Subr
-@section Definition Of Canonical Triples
+NOTE: The rest of this section describes the @code{-subdirs} feature for
+which support is at least temporarily suspended. FIXME-soon.
+Another way to specify the build directory is with the @code{-subdirs}
+option. For example:
-@node Maps Aliases To Canonical Triples, Validates Canonical Triples, Definition Of Canonical Triples, Canonical Triples And Config.Subr
-@section Maps Aliases To Canonical Triples
+@example
+configure @var{host} -subdirs
+@end example
+Using this option, @code{configure} will create a subdirectory named
+@file{H-@var{host}} to act as the build directory for each source
+directory.
-@node Validates Canonical Triples, , Maps Aliases To Canonical Triples, Canonical Triples And Config.Subr
-@section Validates Canonical Triples
+Since building for multiple hosts is so common, @code{configure}
+recognizes this situation as special. For example:
+@example
+configure @var{host1} @var{host2}
+@end example
+is precisely the same as:
-@node Native Ports, Adding Hosts Or Targets, Canonical Triples And Config.Subr, top
-@chapter Native Ports
+@example
+configure @var{host1} -subdirs
+configure @var{host2} -subdirs
+#end example
+That is, when configuring for multiple hosts or multiple targets,
+@code{-subdir} is assumed.
+When configuring for cross tools, that is, the host is not the target,
+as in:
-@menu
-* Add A Host:: Add A Host
-* Port An Existing Target:: Port An Existing Target
-* Add A Target:: Add A Target
-* Build Host & Target:: Build Host & Target
-* Build New Target On Some Other Host:: Build New Target On Some Other Host
-@end menu
+@example
+configure @var{host} +target=@var{targ} -subdirs
+@end example
-@node Add A Host, Port An Existing Target, Native Ports, Native Ports
-@section Add A Host
+the subdirectories are named @file{X-@var{host}-@var{targ}}. This is
+especially useful when configuring for multiple targets.
+If both @code{-subdirs} and @code{-srcdir=} are given, a tree that
+parallels the source directory structure is created in the current
+directory, except that the current directory represents the source
+directory itself, and the subdirectories are created in this directory
+tree rather than in the source directories.
-@node Port An Existing Target, Add A Target, Add A Host, Native Ports
-@section Port An Existing Target
+NOTE: previously, -subdirs built two level subdirectories as
+./H-host/T-target, created ./H-host/Makefile for building across all
+targets, ./Makefile for building across all hosts, and ./config.status
+and ./H-host/config.status for rebuilding these Makefiles.
+@node Host, Target, Build Directories, Using Configure
+@section Host
-@node Add A Target, Build Host & Target, Port An Existing Target, Native Ports
-@section Add A Target
+NOTE: support for multiple hosts is at least temporarily suspended.
+FIXME-soon.
+The arguments to @code{configure} are @emph{hosts}. By @emph{host} we
+mean the environment in which the source will be compiled. This need
+not necessarily be the same as the actual physical machine involved,
+although it usually is.
-@node Build Host & Target, Build New Target On Some Other Host, Add A Target, Native Ports
-@section Build Host & Target
+For example, if some obscure machine running an operating system other
+than @sc{un*x} actually had the @sc{gnu} @sc{posix} emulation libraries
+available, it would be possible to configure most @sc{gnu} source for a
+@sc{posix} system and build it on the obscure host.
+For more on this topic, see @xref{Host Environments, , cfg-paper, On
+Configuring Development Tools}.
-@node Build New Target On Some Other Host, , Build Host & Target, Native Ports
-@section Build New Target On Some Other Host
+@node Target, Local Conventions, Host, Using Configure
+@section Target
+For building native development tools, or most of the other tools in the
+@sc{gnu} collection, you need not worry about the target. The
+@emph{target} of a configuration defaults to the same as the
+@emph{host}.
+For building cross development tools, please see @xref{Building
+Development Environments, , cfg-paper, On Configuring Development
+Tools}.
-@node Adding Hosts Or Targets, Adding Configure To Existing Programs, Native Ports, top
-@chapter Adding Hosts Or Targets
+@node Local Conventions, , Target, Using Configure
+@section Local Conventions
+If you find that a tool does not get configured to your liking or that
+@code{configure}'s conventions are not your local conventions, you
+should probably consider site specific Makefile fragments. (see
+@xref{FIXME-now: site specific makefile fragments})
+These are probably not the right choice for options that can be set from
+the @code{configure} command line or for differences that are host or
+target dependent.
-@menu
-* Add Canonical Triple To Config.Subr (Cf Config.Subr):: Add Canonical Triple To Config.Subr (Cf Config.Subr)
-* (Optional) Add Alias (Cf Config.Subr)::
-* Monte Carlo - Configure ; Make:: Monte Carlo - Configure ; Make
-* Remedies:: Remedies
-@end menu
-@node Add Canonical Triple To Config.Subr (Cf Config.Subr), (Optional) Add Alias (Cf Config.Subr), Adding Hosts Or Targets, Adding Hosts Or Targets
-@section Add Canonical Triple To Config.Subr (Cf Config.Subr)
+@node What Configure Does, Porting, Using Configure, top
+@chapter What Configure Does
+When configure runs, it does the following things for each source
+directory for each host and target combination.
-@node (Optional) Add Alias (Cf Config.Subr), Monte Carlo - Configure ; Make, Add Canonical Triple To Config.Subr (Cf Config.Subr), Adding Hosts Or Targets
-@section (Optional) Add Alias (Cf Config.Subr)
+NOTE: support for multiple hosts and targets is at least temporarily
+suspended.
+@itemize @bullet
-@node Monte Carlo - Configure ; Make, Remedies, (Optional) Add Alias (Cf Config.Subr), Adding Hosts Or Targets
-@section Monte Carlo - Configure ; Make
+@item Create Build Directories
+(see @xref{Build Directories}) When @code{configure} is run with the
+@code{-srcdir=} option, a directory tree is created that parallels the
+directory structure of the source directory except that the current
+directory is treated as the build directory for the source directory
+proper. (see @xref{Invoking}).
+
+NOTE: support for @code{-subdirs} is at least temporarily suspended.
+
+When @code{configure} is run with the @code{-subdirs} option, a build
+directory is created in each source directory.
+
+If both @code{-subdirs} and @code{-srcdir=} are given, a tree that
+parallels the source directory structure is created in the current
+directory, except that the current directory represents the source
+directory itself, and the subdirectories are created in this directory
+tree rather than in the source directories.
+
+@item Generate Makefiles
+A makefile template, usually called @file{Makefile.in} from the source
+directory is copied to an output file in the build directory. The
+output file is usually named @file{Makefile}. A number of makefile
+macros are prepended to the output file. If @code{-prefix=} or
+@code{-datadir=} were specified on the @code{configure} command line,
+then the makefile variables are set accordingly. If host, target, or
+site, specific makefile fragments exist, they are inserted into the
+output file. (see @xref{Makefiles, , , make, Makefiles})
+
+@item Generate .gdbinit
+If the source directory contains a .gdbinit file and the build directory
+is different from the source directory, a .gdbinit file is created in
+the build directory. (see @xref{Command Files, , , gdb, Command Files})
+
+@item Make Symbolic Links
+Most directories have some symbolic links with generic names built
+pointing to specific files in the source directory. If the system on
+which @code{configure} is run cannot support symbolic links, then hard
+links are used instead.
+
+@item Miscellaneous
+If the source directory has special needs, they are handled. Usually
+there are none, but sometimes they involve changes to the output
+makefile.
+
+@item Generate config.status
+A shell script named @file{config.status} is created in the build
+directory. This shell script, when run from the build directory, will
+reconfigure the build directory except that subdirectories are not
+reconfigured. This is most often used by @code{make} to rebuild the
+output makefile. (see @xref{Top, , , bash})
+
+@item Recursion
+If the source directory has subdirectories that should also be
+configured, then @code{configure} is called for each.
+@end itemize
-@node Remedies, , Monte Carlo - Configure ; Make, Adding Hosts Or Targets
-@section Remedies
+@node Porting, Known Bugs, What Configure Does, top
+@chapter Porting with Configure
+This section explains briefly how to port configure for:
@menu
-* Automagic Config:: Automagic Config
-* Symlinked Files:: Symlinked Files
-* Makefile Fragments (Cf Configure.In):: Makefile Fragments (Cf Configure.In)
+* Programs:: Adding configure to existing programs
+* Hosts:: Adding new hosts to existing programs
+* Targets:: Adding new targets to existing programs
+* Reference:: Reference
@end menu
-@node Automagic Config, Symlinked Files, Remedies, Remedies
-@subsection Automagic Config
-
-
-@node Symlinked Files, Makefile Fragments (Cf Configure.In), Automagic Config, Remedies
-@subsection Symlinked Files
-
-
-@node Makefile Fragments (Cf Configure.In), , Symlinked Files, Remedies
-@subsection Makefile Fragments (Cf Configure.In)
-
-@node Adding Configure To Existing Programs, Known Bugs, Adding Hosts Or Targets, top
-@chapter Adding Configure To Existing Programs
-
+@node Programs, , Remedies, Adding Hosts Or Targets
+@subsection Adding Configure To Existing Programs
If you are writing a new program, don't worry about porting issues or
configure until it is running reasonably on some host. Then refer
back to this section.
+If your
+
+@c marker
+
@menu
* Makefile Support:: Makefile Support
-* Automagic Configuration:: Automagic Configuration
+* Add Standard Macros (Template Follows):: Add Standard Macros (Template Follows)
@end menu
-@node Makefile Support, Automagic Configuration, Adding Configure To Existing Programs, Adding Configure To Existing Programs
-@section Makefile Support
+@node Makefile Support, Add Standard Macros (Template Follows), Adding Configure To Existing Programs, Adding Configure To Existing Programs
+@subsubsection Makefile Support
@menu
* Makefile Host Support - Move It To Host Fragments:: Makefile Host Support - Move It To Host Fragments
-* Add Standard Macros (Template Follows):: Add Standard Macros (Template Follows)
@end menu
-@node Makefile Host Support - Move It To Host Fragments, Add Standard Macros (Template Follows), Makefile Support, Makefile Support
-@subsection Makefile Host Support - Move It To Host Fragments
-
-@node Add Standard Macros (Template Follows), , Makefile Host Support - Move It To Host Fragments, Makefile Support
-@subsection Add Standard Macros (Template Follows)
+@node Add Standard Macros (Template Follows), , Makefile Support, Adding Configure To Existing Programs
+@subsubsection Add Standard Macros (Template Follows)
@itemize @bullet
@item as defined in standards.text
@end itemize
@end itemize
-@node Automagic Configuration, , Makefile Support, Adding Configure To Existing Programs
-@section Automagic Configuration
+@node Native Ports, Adding Hosts Or Targets, Porting, Porting
+@section Native Ports
+
+To port a GNU tool that uses the Cygnus Configure system, do the
+following.
+
+@itemize @asis
+
+@item Add A Host
+@item Port An Existing Target
+@item Add A Target
+@item Build Host & Target
+@item Build New Target On Some Other Host
+
+@end table
+
+@node Adding Hosts Or Targets, Reference, Native Ports, Porting
+@section Adding Hosts Or Targets
+
@menu
-* Should Be Used If Prep'D Files Don'T Exist:: Should Be Used If Prep'D Files Don'T Exist
+* Add Canonical Triple To Config.Subr (Cf Config.Subr):: Add Canonical Triple To Config.Subr (Cf Config.Subr)
+* (Optional) Add Alias (Cf Config.Subr)::
+* Monte Carlo - Configure ; Make:: Monte Carlo - Configure ; Make
+* Remedies:: Remedies
+* Adding Configure To Existing Programs:: Adding Configure To Existing Programs
@end menu
-@node Should Be Used If Prep'D Files Don'T Exist, , Automagic Configuration, Automagic Configuration
-@subsection Should Be Used If Prep'D Files Don'T Exist
+@node Add Canonical Triple To Config.Subr (Cf Config.Subr), (Optional) Add Alias (Cf Config.Subr), Adding Hosts Or Targets, Adding Hosts Or Targets
+@subsection Add Canonical Triple To Config.Subr (Cf Config.Subr)
+
+
+@node (Optional) Add Alias (Cf Config.Subr), Monte Carlo - Configure ; Make, Add Canonical Triple To Config.Subr (Cf Config.Subr), Adding Hosts Or Targets
+@subsection (Optional) Add Alias (Cf Config.Subr)
+
+
+@node Monte Carlo - Configure ; Make, Remedies, (Optional) Add Alias (Cf Config.Subr), Adding Hosts Or Targets
+@subsection Monte Carlo - Configure ; Make
+
+@node Remedies, Adding Configure To Existing Programs, Monte Carlo - Configure ; Make, Adding Hosts Or Targets
+@subsection Remedies
-@node Known Bugs, Variables Index, Adding Configure To Existing Programs, top
+@menu
+* Automagic Config:: Automagic Config
+* Symlinked Files:: Symlinked Files
+* Makefile Fragments (Cf Configure.In):: Makefile Fragments (Cf Configure.In)
+@end menu
+
+@node Automagic Config, Symlinked Files, Remedies, Remedies
+@subsubsection Automagic Config
+
+
+@node Symlinked Files, Makefile Fragments (Cf Configure.In), Automagic Config, Remedies
+@subsubsection Symlinked Files
+
+
+@node Makefile Fragments (Cf Configure.In), , Symlinked Files, Remedies
+@subsubsection Makefile Fragments (Cf Configure.In)
+
+@node Reference, , Adding Hosts Or Targets, Porting
+@section Reference
+
+
+
+Automagic Configuration Should Be Used If Prep'D Files Don'T Exist.
+
+@node Known Bugs, Variables Index, Porting, top
@chapter Known Bugs
The following bugs are known to exist.
@end itemize
@node Variables Index, Concept Index, Known Bugs, top
-@unnumbered Variable Index
+@appendix Variable Index
@printindex vr
@node Concept Index, , Variables Index, top
-@unnumbered Concept Index
+@appendix Concept Index
@printindex cp
-
-@summarycontents
@contents
@bye
projects / deliverable / binutils-gdb.git / blobdiff