#define VGA_MSR_MEM_EN (1<<1)
#define VGA_MSR_CGA_MODE (1<<0)
-/*
- * SR01 is the only VGA register touched on non-UMS setups.
- * VLV doesn't do UMS, so the sequencer index/data registers
- * are the only VGA registers which need to include
- * display_mmio_offset.
- */
-#define VGA_SR_INDEX (dev_priv->info->display_mmio_offset + 0x3c4)
+#define VGA_SR_INDEX 0x3c4
#define SR01 1
-#define VGA_SR_DATA (dev_priv->info->display_mmio_offset + 0x3c5)
+#define VGA_SR_DATA 0x3c5
#define VGA_AR_INDEX 0x3c0
#define VGA_AR_VID_EN (1<<5)
#define MI_SEMAPHORE_UPDATE (1<<21)
#define MI_SEMAPHORE_COMPARE (1<<20)
#define MI_SEMAPHORE_REGISTER (1<<18)
-#define MI_SEMAPHORE_SYNC_RV (2<<16)
-#define MI_SEMAPHORE_SYNC_RB (0<<16)
-#define MI_SEMAPHORE_SYNC_VR (0<<16)
-#define MI_SEMAPHORE_SYNC_VB (2<<16)
-#define MI_SEMAPHORE_SYNC_BR (2<<16)
-#define MI_SEMAPHORE_SYNC_BV (0<<16)
-#define MI_SEMAPHORE_SYNC_INVALID (1<<0)
+#define MI_SEMAPHORE_SYNC_VR (0<<16) /* RCS wait for VCS (RVSYNC) */
+#define MI_SEMAPHORE_SYNC_VER (1<<16) /* RCS wait for VECS (RVESYNC) */
+#define MI_SEMAPHORE_SYNC_BR (2<<16) /* RCS wait for BCS (RBSYNC) */
+#define MI_SEMAPHORE_SYNC_BV (0<<16) /* VCS wait for BCS (VBSYNC) */
+#define MI_SEMAPHORE_SYNC_VEV (1<<16) /* VCS wait for VECS (VVESYNC) */
+#define MI_SEMAPHORE_SYNC_RV (2<<16) /* VCS wait for RCS (VRSYNC) */
+#define MI_SEMAPHORE_SYNC_RB (0<<16) /* BCS wait for RCS (BRSYNC) */
+#define MI_SEMAPHORE_SYNC_VEB (1<<16) /* BCS wait for VECS (BVESYNC) */
+#define MI_SEMAPHORE_SYNC_VB (2<<16) /* BCS wait for VCS (BVSYNC) */
+#define MI_SEMAPHORE_SYNC_BVE (0<<16) /* VECS wait for BCS (VEBSYNC) */
+#define MI_SEMAPHORE_SYNC_VVE (1<<16) /* VECS wait for VCS (VEVSYNC) */
+#define MI_SEMAPHORE_SYNC_RVE (2<<16) /* VECS wait for RCS (VERSYNC) */
+#define MI_SEMAPHORE_SYNC_INVALID (3<<16)
/*
* 3D instructions used by the kernel
*/
#define DEBUG_RESET_DISPLAY (1<<9)
/*
- * DPIO - a special bus for various display related registers to hide behind:
- * 0x800c: m1, m2, n, p1, p2, k dividers
- * 0x8014: REF and SFR select
- * 0x8014: N divider, VCO select
- * 0x801c/3c: core clock bits
- * 0x8048/68: low pass filter coefficients
- * 0x8100: fast clock controls
+ * IOSF sideband
+ */
+#define VLV_IOSF_DOORBELL_REQ (VLV_DISPLAY_BASE + 0x2100)
+#define IOSF_DEVFN_SHIFT 24
+#define IOSF_OPCODE_SHIFT 16
+#define IOSF_PORT_SHIFT 8
+#define IOSF_BYTE_ENABLES_SHIFT 4
+#define IOSF_BAR_SHIFT 1
+#define IOSF_SB_BUSY (1<<0)
+#define IOSF_PORT_PUNIT 0x4
+#define IOSF_PORT_NC 0x11
+#define IOSF_PORT_DPIO 0x12
+#define VLV_IOSF_DATA (VLV_DISPLAY_BASE + 0x2104)
+#define VLV_IOSF_ADDR (VLV_DISPLAY_BASE + 0x2108)
+
+#define PUNIT_OPCODE_REG_READ 6
+#define PUNIT_OPCODE_REG_WRITE 7
+
+#define PUNIT_REG_GPU_LFM 0xd3
+#define PUNIT_REG_GPU_FREQ_REQ 0xd4
+#define PUNIT_REG_GPU_FREQ_STS 0xd8
+#define PUNIT_REG_MEDIA_TURBO_FREQ_REQ 0xdc
+
+#define PUNIT_FUSE_BUS2 0xf6 /* bits 47:40 */
+#define PUNIT_FUSE_BUS1 0xf5 /* bits 55:48 */
+
+#define IOSF_NC_FB_GFX_FREQ_FUSE 0x1c
+#define FB_GFX_MAX_FREQ_FUSE_SHIFT 3
+#define FB_GFX_MAX_FREQ_FUSE_MASK 0x000007f8
+#define FB_GFX_FGUARANTEED_FREQ_FUSE_SHIFT 11
+#define FB_GFX_FGUARANTEED_FREQ_FUSE_MASK 0x0007f800
+#define IOSF_NC_FB_GFX_FMAX_FUSE_HI 0x34
+#define FB_FMAX_VMIN_FREQ_HI_MASK 0x00000007
+#define IOSF_NC_FB_GFX_FMAX_FUSE_LO 0x30
+#define FB_FMAX_VMIN_FREQ_LO_SHIFT 27
+#define FB_FMAX_VMIN_FREQ_LO_MASK 0xf8000000
+
+/*
+ * DPIO - a special bus for various display related registers to hide behind
*
* DPIO is VLV only.
+ *
+ * Note: digital port B is DDI0, digital pot C is DDI1
*/
-#define DPIO_PKT (VLV_DISPLAY_BASE + 0x2100)
-#define DPIO_RID (0<<24)
-#define DPIO_OP_WRITE (1<<16)
-#define DPIO_OP_READ (0<<16)
-#define DPIO_PORTID (0x12<<8)
-#define DPIO_BYTE (0xf<<4)
-#define DPIO_BUSY (1<<0) /* status only */
-#define DPIO_DATA (VLV_DISPLAY_BASE + 0x2104)
-#define DPIO_REG (VLV_DISPLAY_BASE + 0x2108)
+#define DPIO_DEVFN 0
+#define DPIO_OPCODE_REG_WRITE 1
+#define DPIO_OPCODE_REG_READ 0
+
#define DPIO_CTL (VLV_DISPLAY_BASE + 0x2110)
#define DPIO_MODSEL1 (1<<3) /* if ref clk b == 27 */
#define DPIO_MODSEL0 (1<<2) /* if ref clk a == 27 */
#define DPIO_SFR_BYPASS (1<<1)
#define DPIO_RESET (1<<0)
+#define _DPIO_TX3_SWING_CTL4_A 0x690
+#define _DPIO_TX3_SWING_CTL4_B 0x2a90
+#define DPIO_TX3_SWING_CTL4(pipe) _PIPE(pipe, _DPIO_TX_SWING_CTL4_A, \
+ _DPIO_TX3_SWING_CTL4_B)
+
+/*
+ * Per pipe/PLL DPIO regs
+ */
#define _DPIO_DIV_A 0x800c
#define DPIO_POST_DIV_SHIFT (28) /* 3 bits */
+#define DPIO_POST_DIV_DAC 0
+#define DPIO_POST_DIV_HDMIDP 1 /* DAC 225-400M rate */
+#define DPIO_POST_DIV_LVDS1 2
+#define DPIO_POST_DIV_LVDS2 3
#define DPIO_K_SHIFT (24) /* 4 bits */
#define DPIO_P1_SHIFT (21) /* 3 bits */
#define DPIO_P2_SHIFT (16) /* 5 bits */
#define _DPIO_CORE_CLK_B 0x803c
#define DPIO_CORE_CLK(pipe) _PIPE(pipe, _DPIO_CORE_CLK_A, _DPIO_CORE_CLK_B)
-#define _DPIO_LFP_COEFF_A 0x8048
-#define _DPIO_LFP_COEFF_B 0x8068
-#define DPIO_LFP_COEFF(pipe) _PIPE(pipe, _DPIO_LFP_COEFF_A, _DPIO_LFP_COEFF_B)
+#define _DPIO_IREF_CTL_A 0x8040
+#define _DPIO_IREF_CTL_B 0x8060
+#define DPIO_IREF_CTL(pipe) _PIPE(pipe, _DPIO_IREF_CTL_A, _DPIO_IREF_CTL_B)
+
+#define DPIO_IREF_BCAST 0xc044
+#define _DPIO_IREF_A 0x8044
+#define _DPIO_IREF_B 0x8064
+#define DPIO_IREF(pipe) _PIPE(pipe, _DPIO_IREF_A, _DPIO_IREF_B)
+
+#define _DPIO_PLL_CML_A 0x804c
+#define _DPIO_PLL_CML_B 0x806c
+#define DPIO_PLL_CML(pipe) _PIPE(pipe, _DPIO_PLL_CML_A, _DPIO_PLL_CML_B)
+
+#define _DPIO_LPF_COEFF_A 0x8048
+#define _DPIO_LPF_COEFF_B 0x8068
+#define DPIO_LPF_COEFF(pipe) _PIPE(pipe, _DPIO_LPF_COEFF_A, _DPIO_LPF_COEFF_B)
+
+#define DPIO_CALIBRATION 0x80ac
#define DPIO_FASTCLK_DISABLE 0x8100
-#define DPIO_DATA_CHANNEL1 0x8220
-#define DPIO_DATA_CHANNEL2 0x8420
+/*
+ * Per DDI channel DPIO regs
+ */
+
+#define _DPIO_PCS_TX_0 0x8200
+#define _DPIO_PCS_TX_1 0x8400
+#define DPIO_PCS_TX_LANE2_RESET (1<<16)
+#define DPIO_PCS_TX_LANE1_RESET (1<<7)
+#define DPIO_PCS_TX(port) _PORT(port, _DPIO_PCS_TX_0, _DPIO_PCS_TX_1)
+
+#define _DPIO_PCS_CLK_0 0x8204
+#define _DPIO_PCS_CLK_1 0x8404
+#define DPIO_PCS_CLK_CRI_RXEB_EIOS_EN (1<<22)
+#define DPIO_PCS_CLK_CRI_RXDIGFILTSG_EN (1<<21)
+#define DPIO_PCS_CLK_DATAWIDTH_SHIFT (6)
+#define DPIO_PCS_CLK_SOFT_RESET (1<<5)
+#define DPIO_PCS_CLK(port) _PORT(port, _DPIO_PCS_CLK_0, _DPIO_PCS_CLK_1)
+
+#define _DPIO_PCS_CTL_OVR1_A 0x8224
+#define _DPIO_PCS_CTL_OVR1_B 0x8424
+#define DPIO_PCS_CTL_OVER1(port) _PORT(port, _DPIO_PCS_CTL_OVR1_A, \
+ _DPIO_PCS_CTL_OVR1_B)
+
+#define _DPIO_PCS_STAGGER0_A 0x822c
+#define _DPIO_PCS_STAGGER0_B 0x842c
+#define DPIO_PCS_STAGGER0(port) _PORT(port, _DPIO_PCS_STAGGER0_A, \
+ _DPIO_PCS_STAGGER0_B)
+
+#define _DPIO_PCS_STAGGER1_A 0x8230
+#define _DPIO_PCS_STAGGER1_B 0x8430
+#define DPIO_PCS_STAGGER1(port) _PORT(port, _DPIO_PCS_STAGGER1_A, \
+ _DPIO_PCS_STAGGER1_B)
+
+#define _DPIO_PCS_CLOCKBUF0_A 0x8238
+#define _DPIO_PCS_CLOCKBUF0_B 0x8438
+#define DPIO_PCS_CLOCKBUF0(port) _PORT(port, _DPIO_PCS_CLOCKBUF0_A, \
+ _DPIO_PCS_CLOCKBUF0_B)
+
+#define _DPIO_PCS_CLOCKBUF8_A 0x825c
+#define _DPIO_PCS_CLOCKBUF8_B 0x845c
+#define DPIO_PCS_CLOCKBUF8(port) _PORT(port, _DPIO_PCS_CLOCKBUF8_A, \
+ _DPIO_PCS_CLOCKBUF8_B)
+
+#define _DPIO_TX_SWING_CTL2_A 0x8288
+#define _DPIO_TX_SWING_CTL2_B 0x8488
+#define DPIO_TX_SWING_CTL2(port) _PORT(port, _DPIO_TX_SWING_CTL2_A, \
+ _DPIO_TX_SWING_CTL2_B)
+
+#define _DPIO_TX_SWING_CTL3_A 0x828c
+#define _DPIO_TX_SWING_CTL3_B 0x848c
+#define DPIO_TX_SWING_CTL3(port) _PORT(port, _DPIO_TX_SWING_CTL3_A, \
+ _DPIO_TX_SWING_CTL3_B)
+
+#define _DPIO_TX_SWING_CTL4_A 0x8290
+#define _DPIO_TX_SWING_CTL4_B 0x8490
+#define DPIO_TX_SWING_CTL4(port) _PORT(port, _DPIO_TX_SWING_CTL4_A, \
+ _DPIO_TX_SWING_CTL4_B)
+
+#define _DPIO_TX_OCALINIT_0 0x8294
+#define _DPIO_TX_OCALINIT_1 0x8494
+#define DPIO_TX_OCALINIT_EN (1<<31)
+#define DPIO_TX_OCALINIT(port) _PORT(port, _DPIO_TX_OCALINIT_0, \
+ _DPIO_TX_OCALINIT_1)
+
+#define _DPIO_TX_CTL_0 0x82ac
+#define _DPIO_TX_CTL_1 0x84ac
+#define DPIO_TX_CTL(port) _PORT(port, _DPIO_TX_CTL_0, _DPIO_TX_CTL_1)
+
+#define _DPIO_TX_LANE_0 0x82b8
+#define _DPIO_TX_LANE_1 0x84b8
+#define DPIO_TX_LANE(port) _PORT(port, _DPIO_TX_LANE_0, _DPIO_TX_LANE_1)
+
+#define _DPIO_DATA_CHANNEL1 0x8220
+#define _DPIO_DATA_CHANNEL2 0x8420
+#define DPIO_DATA_CHANNEL(port) _PORT(port, _DPIO_DATA_CHANNEL1, _DPIO_DATA_CHANNEL2)
+
+#define _DPIO_PORT0_PCS0 0x0220
+#define _DPIO_PORT0_PCS1 0x0420
+#define _DPIO_PORT1_PCS2 0x2620
+#define _DPIO_PORT1_PCS3 0x2820
+#define DPIO_DATA_LANE_A(port) _PORT(port, _DPIO_PORT0_PCS0, _DPIO_PORT1_PCS2)
+#define DPIO_DATA_LANE_B(port) _PORT(port, _DPIO_PORT0_PCS1, _DPIO_PORT1_PCS3)
+#define DPIO_DATA_CHANNEL1 0x8220
+#define DPIO_DATA_CHANNEL2 0x8420
/*
* Fence registers
#define RENDER_RING_BASE 0x02000
#define BSD_RING_BASE 0x04000
#define GEN6_BSD_RING_BASE 0x12000
+#define VEBOX_RING_BASE 0x1a000
#define BLT_RING_BASE 0x22000
#define RING_TAIL(base) ((base)+0x30)
#define RING_HEAD(base) ((base)+0x34)
#define RING_CTL(base) ((base)+0x3c)
#define RING_SYNC_0(base) ((base)+0x40)
#define RING_SYNC_1(base) ((base)+0x44)
-#define GEN6_RVSYNC (RING_SYNC_0(RENDER_RING_BASE))
-#define GEN6_RBSYNC (RING_SYNC_1(RENDER_RING_BASE))
-#define GEN6_VRSYNC (RING_SYNC_1(GEN6_BSD_RING_BASE))
-#define GEN6_VBSYNC (RING_SYNC_0(GEN6_BSD_RING_BASE))
-#define GEN6_BRSYNC (RING_SYNC_0(BLT_RING_BASE))
-#define GEN6_BVSYNC (RING_SYNC_1(BLT_RING_BASE))
+#define RING_SYNC_2(base) ((base)+0x48)
+#define GEN6_RVSYNC (RING_SYNC_0(RENDER_RING_BASE))
+#define GEN6_RBSYNC (RING_SYNC_1(RENDER_RING_BASE))
+#define GEN6_RVESYNC (RING_SYNC_2(RENDER_RING_BASE))
+#define GEN6_VBSYNC (RING_SYNC_0(GEN6_BSD_RING_BASE))
+#define GEN6_VRSYNC (RING_SYNC_1(GEN6_BSD_RING_BASE))
+#define GEN6_VVESYNC (RING_SYNC_2(GEN6_BSD_RING_BASE))
+#define GEN6_BRSYNC (RING_SYNC_0(BLT_RING_BASE))
+#define GEN6_BVSYNC (RING_SYNC_1(BLT_RING_BASE))
+#define GEN6_BVESYNC (RING_SYNC_2(BLT_RING_BASE))
+#define GEN6_VEBSYNC (RING_SYNC_0(VEBOX_RING_BASE))
+#define GEN6_VERSYNC (RING_SYNC_1(VEBOX_RING_BASE))
+#define GEN6_VEVSYNC (RING_SYNC_2(VEBOX_RING_BASE))
+#define GEN6_NOSYNC 0
#define RING_MAX_IDLE(base) ((base)+0x54)
#define RING_HWS_PGA(base) ((base)+0x80)
#define RING_HWS_PGA_GEN6(base) ((base)+0x2080)
#define DONE_REG 0x40b0
#define BSD_HWS_PGA_GEN7 (0x04180)
#define BLT_HWS_PGA_GEN7 (0x04280)
+#define VEBOX_HWS_PGA_GEN7 (0x04380)
#define RING_ACTHD(base) ((base)+0x74)
#define RING_NOPID(base) ((base)+0x94)
#define RING_IMR(base) ((base)+0xa8)
#define ERROR_GEN6 0x040a0
#define GEN7_ERR_INT 0x44040
-#define ERR_INT_MMIO_UNCLAIMED (1<<13)
+#define ERR_INT_POISON (1<<31)
+#define ERR_INT_MMIO_UNCLAIMED (1<<13)
+#define ERR_INT_FIFO_UNDERRUN_C (1<<6)
+#define ERR_INT_FIFO_UNDERRUN_B (1<<3)
+#define ERR_INT_FIFO_UNDERRUN_A (1<<0)
#define FPGA_DBG 0x42300
#define FPGA_DBG_RM_NOCLAIM (1<<31)
#define VLV_IIR (VLV_DISPLAY_BASE + 0x20a4)
#define VLV_IMR (VLV_DISPLAY_BASE + 0x20a8)
#define VLV_ISR (VLV_DISPLAY_BASE + 0x20ac)
-#define I915_PIPE_CONTROL_NOTIFY_INTERRUPT (1<<18)
-#define I915_DISPLAY_PORT_INTERRUPT (1<<17)
-#define I915_RENDER_COMMAND_PARSER_ERROR_INTERRUPT (1<<15)
-#define I915_GMCH_THERMAL_SENSOR_EVENT_INTERRUPT (1<<14) /* p-state */
-#define I915_HWB_OOM_INTERRUPT (1<<13)
-#define I915_SYNC_STATUS_INTERRUPT (1<<12)
-#define I915_DISPLAY_PLANE_A_FLIP_PENDING_INTERRUPT (1<<11)
-#define I915_DISPLAY_PLANE_B_FLIP_PENDING_INTERRUPT (1<<10)
-#define I915_OVERLAY_PLANE_FLIP_PENDING_INTERRUPT (1<<9)
-#define I915_DISPLAY_PLANE_C_FLIP_PENDING_INTERRUPT (1<<8)
-#define I915_DISPLAY_PIPE_A_VBLANK_INTERRUPT (1<<7)
-#define I915_DISPLAY_PIPE_A_EVENT_INTERRUPT (1<<6)
-#define I915_DISPLAY_PIPE_B_VBLANK_INTERRUPT (1<<5)
-#define I915_DISPLAY_PIPE_B_EVENT_INTERRUPT (1<<4)
-#define I915_DEBUG_INTERRUPT (1<<2)
-#define I915_USER_INTERRUPT (1<<1)
-#define I915_ASLE_INTERRUPT (1<<0)
-#define I915_BSD_USER_INTERRUPT (1<<25)
+#define VLV_PCBR (VLV_DISPLAY_BASE + 0x2120)
#define DISPLAY_PLANE_FLIP_PENDING(plane) (1<<(11-(plane))) /* A and B only */
#define EIR 0x020b0
#define EMR 0x020b4
#define CACHE_MODE_1 0x7004 /* IVB+ */
#define PIXEL_SUBSPAN_COLLECT_OPT_DISABLE (1<<6)
-/* GEN6 interrupt control
- * Note that the per-ring interrupt bits do alias with the global interrupt bits
- * in GTIMR. */
-#define GEN6_RENDER_HWSTAM 0x2098
-#define GEN6_RENDER_IMR 0x20a8
-#define GEN6_RENDER_CONTEXT_SWITCH_INTERRUPT (1 << 8)
-#define GEN6_RENDER_PPGTT_PAGE_FAULT (1 << 7)
-#define GEN6_RENDER_TIMEOUT_COUNTER_EXPIRED (1 << 6)
-#define GEN6_RENDER_L3_PARITY_ERROR (1 << 5)
-#define GEN6_RENDER_PIPE_CONTROL_NOTIFY_INTERRUPT (1 << 4)
-#define GEN6_RENDER_COMMAND_PARSER_MASTER_ERROR (1 << 3)
-#define GEN6_RENDER_SYNC_STATUS (1 << 2)
-#define GEN6_RENDER_DEBUG_INTERRUPT (1 << 1)
-#define GEN6_RENDER_USER_INTERRUPT (1 << 0)
-
-#define GEN6_BLITTER_HWSTAM 0x22098
-#define GEN6_BLITTER_IMR 0x220a8
-#define GEN6_BLITTER_MI_FLUSH_DW_NOTIFY_INTERRUPT (1 << 26)
-#define GEN6_BLITTER_COMMAND_PARSER_MASTER_ERROR (1 << 25)
-#define GEN6_BLITTER_SYNC_STATUS (1 << 24)
-#define GEN6_BLITTER_USER_INTERRUPT (1 << 22)
-
#define GEN6_BLITTER_ECOSKPD 0x221d0
#define GEN6_BLITTER_LOCK_SHIFT 16
#define GEN6_BLITTER_FBC_NOTIFY (1<<3)
#define GEN6_BSD_SLEEP_INDICATOR (1 << 3)
#define GEN6_BSD_GO_INDICATOR (1 << 4)
-#define GEN6_BSD_HWSTAM 0x12098
-#define GEN6_BSD_IMR 0x120a8
-#define GEN6_BSD_USER_INTERRUPT (1 << 12)
+/* On modern GEN architectures interrupt control consists of two sets
+ * of registers. The first set pertains to the ring generating the
+ * interrupt. The second control is for the functional block generating the
+ * interrupt. These are PM, GT, DE, etc.
+ *
+ * Luckily *knocks on wood* all the ring interrupt bits match up with the
+ * GT interrupt bits, so we don't need to duplicate the defines.
+ *
+ * These defines should cover us well from SNB->HSW with minor exceptions
+ * it can also work on ILK.
+ */
+#define GT_BLT_FLUSHDW_NOTIFY_INTERRUPT (1 << 26)
+#define GT_BLT_CS_ERROR_INTERRUPT (1 << 25)
+#define GT_BLT_USER_INTERRUPT (1 << 22)
+#define GT_BSD_CS_ERROR_INTERRUPT (1 << 15)
+#define GT_BSD_USER_INTERRUPT (1 << 12)
+#define GT_RENDER_L3_PARITY_ERROR_INTERRUPT (1 << 5) /* !snb */
+#define GT_RENDER_PIPECTL_NOTIFY_INTERRUPT (1 << 4)
+#define GT_RENDER_CS_MASTER_ERROR_INTERRUPT (1 << 3)
+#define GT_RENDER_SYNC_STATUS_INTERRUPT (1 << 2)
+#define GT_RENDER_DEBUG_INTERRUPT (1 << 1)
+#define GT_RENDER_USER_INTERRUPT (1 << 0)
+
+#define PM_VEBOX_CS_ERROR_INTERRUPT (1 << 12) /* hsw+ */
+#define PM_VEBOX_USER_INTERRUPT (1 << 10) /* hsw+ */
+
+/* These are all the "old" interrupts */
+#define ILK_BSD_USER_INTERRUPT (1<<5)
+#define I915_PIPE_CONTROL_NOTIFY_INTERRUPT (1<<18)
+#define I915_DISPLAY_PORT_INTERRUPT (1<<17)
+#define I915_RENDER_COMMAND_PARSER_ERROR_INTERRUPT (1<<15)
+#define I915_GMCH_THERMAL_SENSOR_EVENT_INTERRUPT (1<<14) /* p-state */
+#define I915_HWB_OOM_INTERRUPT (1<<13)
+#define I915_SYNC_STATUS_INTERRUPT (1<<12)
+#define I915_DISPLAY_PLANE_A_FLIP_PENDING_INTERRUPT (1<<11)
+#define I915_DISPLAY_PLANE_B_FLIP_PENDING_INTERRUPT (1<<10)
+#define I915_OVERLAY_PLANE_FLIP_PENDING_INTERRUPT (1<<9)
+#define I915_DISPLAY_PLANE_C_FLIP_PENDING_INTERRUPT (1<<8)
+#define I915_DISPLAY_PIPE_A_VBLANK_INTERRUPT (1<<7)
+#define I915_DISPLAY_PIPE_A_EVENT_INTERRUPT (1<<6)
+#define I915_DISPLAY_PIPE_B_VBLANK_INTERRUPT (1<<5)
+#define I915_DISPLAY_PIPE_B_EVENT_INTERRUPT (1<<4)
+#define I915_DEBUG_INTERRUPT (1<<2)
+#define I915_USER_INTERRUPT (1<<1)
+#define I915_ASLE_INTERRUPT (1<<0)
+#define I915_BSD_USER_INTERRUPT (1 << 25)
#define GEN6_BSD_RNCID 0x12198
#define DPFC_CTL_EN (1<<31)
#define DPFC_CTL_PLANEA (0<<30)
#define DPFC_CTL_PLANEB (1<<30)
+#define IVB_DPFC_CTL_PLANE_SHIFT (29)
#define DPFC_CTL_FENCE_EN (1<<29)
+#define IVB_DPFC_CTL_FENCE_EN (1<<28)
#define DPFC_CTL_PERSISTENT_MODE (1<<25)
#define DPFC_SR_EN (1<<10)
#define DPFC_CTL_LIMIT_1X (0<<6)
#define ILK_DPFC_CHICKEN 0x43224
#define ILK_FBC_RT_BASE 0x2128
#define ILK_FBC_RT_VALID (1<<0)
+#define SNB_FBC_FRONT_BUFFER (1<<1)
#define ILK_DISPLAY_CHICKEN1 0x42000
#define ILK_FBCQ_DIS (1<<22)
#define SNB_CPU_FENCE_ENABLE (1<<29)
#define DPFC_CPU_FENCE_OFFSET 0x100104
+/* Framebuffer compression for Ivybridge */
+#define IVB_FBC_RT_BASE 0x7020
+
+#define IPS_CTL 0x43408
+#define IPS_ENABLE (1 << 31)
+
+#define MSG_FBC_REND_STATE 0x50380
+#define FBC_REND_NUKE (1<<2)
+#define FBC_REND_CACHE_CLEAN (1<<1)
+
+#define _HSW_PIPE_SLICE_CHICKEN_1_A 0x420B0
+#define _HSW_PIPE_SLICE_CHICKEN_1_B 0x420B4
+#define HSW_BYPASS_FBC_QUEUE (1<<22)
+#define HSW_PIPE_SLICE_CHICKEN_1(pipe) _PIPE(pipe, + \
+ _HSW_PIPE_SLICE_CHICKEN_1_A, + \
+ _HSW_PIPE_SLICE_CHICKEN_1_B)
+
+#define HSW_CLKGATE_DISABLE_PART_1 0x46500
+#define HSW_DPFC_GATING_DISABLE (1<<23)
/*
* GPIO regs
#define DPLL_FPA01_P1_POST_DIV_MASK 0x00ff0000 /* i915 */
#define DPLL_FPA01_P1_POST_DIV_MASK_PINEVIEW 0x00ff8000 /* Pineview */
#define DPLL_LOCK_VLV (1<<15)
+#define DPLL_INTEGRATED_CRI_CLK_VLV (1<<14)
#define DPLL_INTEGRATED_CLOCK_VLV (1<<13)
+#define DPLL_PORTC_READY_MASK (0xf << 4)
+#define DPLL_PORTB_READY_MASK (0xf)
#define DPLL_FPA01_P1_POST_DIV_MASK_I830 0x001f0000
/*
#define DSTATE_PLL_D3_OFF (1<<3)
#define DSTATE_GFX_CLOCK_GATING (1<<1)
#define DSTATE_DOT_CLOCK_GATING (1<<0)
-#define DSPCLK_GATE_D 0x6200
+#define DSPCLK_GATE_D (dev_priv->info->display_mmio_offset + 0x6200)
# define DPUNIT_B_CLOCK_GATE_DISABLE (1 << 30) /* 965 */
# define VSUNIT_CLOCK_GATE_DISABLE (1 << 29) /* 965 */
# define VRHUNIT_CLOCK_GATE_DISABLE (1 << 28) /* 965 */
#define FW_BLC_SELF_VLV (VLV_DISPLAY_BASE + 0x6500)
#define FW_CSPWRDWNEN (1<<15)
+#define MI_ARB_VLV (VLV_DISPLAY_BASE + 0x6504)
+
/*
* Palette regs
*/
GEN7_CXT_EXTENDED_SIZE(ctx_reg) + \
GEN7_CXT_GT1_SIZE(ctx_reg) + \
GEN7_CXT_VFSTATE_SIZE(ctx_reg))
-#define HSW_CXT_POWER_SIZE(ctx_reg) ((ctx_reg >> 26) & 0x3f)
-#define HSW_CXT_RING_SIZE(ctx_reg) ((ctx_reg >> 23) & 0x7)
-#define HSW_CXT_RENDER_SIZE(ctx_reg) ((ctx_reg >> 15) & 0xff)
-#define HSW_CXT_TOTAL_SIZE(ctx_reg) (HSW_CXT_POWER_SIZE(ctx_reg) + \
- HSW_CXT_RING_SIZE(ctx_reg) + \
- HSW_CXT_RENDER_SIZE(ctx_reg) + \
- GEN7_CXT_VFSTATE_SIZE(ctx_reg))
-
+/* Haswell does have the CXT_SIZE register however it does not appear to be
+ * valid. Now, docs explain in dwords what is in the context object. The full
+ * size is 70720 bytes, however, the power context and execlist context will
+ * never be saved (power context is stored elsewhere, and execlists don't work
+ * on HSW) - so the final size is 66944 bytes, which rounds to 17 pages.
+ */
+#define HSW_CXT_TOTAL_SIZE (17 * PAGE_SIZE)
/*
* Overlay regs
/* SDVO is different across gen3/4 */
#define SDVOC_HOTPLUG_INT_STATUS_G4X (1 << 3)
#define SDVOB_HOTPLUG_INT_STATUS_G4X (1 << 2)
+/*
+ * Bspec seems to be seriously misleaded about the SDVO hpd bits on i965g/gm,
+ * since reality corrobates that they're the same as on gen3. But keep these
+ * bits here (and the comment!) to help any other lost wanderers back onto the
+ * right tracks.
+ */
#define SDVOC_HOTPLUG_INT_STATUS_I965 (3 << 4)
#define SDVOB_HOTPLUG_INT_STATUS_I965 (3 << 2)
#define SDVOC_HOTPLUG_INT_STATUS_I915 (1 << 7)
PORTC_HOTPLUG_INT_STATUS | \
PORTD_HOTPLUG_INT_STATUS)
-#define HOTPLUG_INT_STATUS_I965 (CRT_HOTPLUG_INT_STATUS | \
- SDVOB_HOTPLUG_INT_STATUS_I965 | \
- SDVOC_HOTPLUG_INT_STATUS_I965 | \
- PORTB_HOTPLUG_INT_STATUS | \
- PORTC_HOTPLUG_INT_STATUS | \
- PORTD_HOTPLUG_INT_STATUS)
-
#define HOTPLUG_INT_STATUS_I915 (CRT_HOTPLUG_INT_STATUS | \
SDVOB_HOTPLUG_INT_STATUS_I915 | \
SDVOC_HOTPLUG_INT_STATUS_I915 | \
#define BLM_PIPE_A (0 << 29)
#define BLM_PIPE_B (1 << 29)
#define BLM_PIPE_C (2 << 29) /* ivb + */
+#define BLM_TRANSCODER_A BLM_PIPE_A /* hsw */
+#define BLM_TRANSCODER_B BLM_PIPE_B
+#define BLM_TRANSCODER_C BLM_PIPE_C
+#define BLM_TRANSCODER_EDP (3 << 29)
#define BLM_PIPE(pipe) ((pipe) << 29)
#define BLM_POLARITY_I965 (1 << 28) /* gen4 only */
#define BLM_PHASE_IN_INTERUPT_STATUS (1 << 26)
#define DP_PRE_EMPHASIS_SHIFT 22
/* How many wires to use. I guess 3 was too hard */
-#define DP_PORT_WIDTH_1 (0 << 19)
-#define DP_PORT_WIDTH_2 (1 << 19)
-#define DP_PORT_WIDTH_4 (3 << 19)
+#define DP_PORT_WIDTH(width) (((width) - 1) << 19)
#define DP_PORT_WIDTH_MASK (7 << 19)
/* Mystic DPCD version 1.1 special mode */
* which is after the LUTs, so we want the bytes for our color format.
* For our current usage, this is always 3, one byte for R, G and B.
*/
-#define _PIPEA_GMCH_DATA_M 0x70050
-#define _PIPEB_GMCH_DATA_M 0x71050
+#define _PIPEA_DATA_M_G4X 0x70050
+#define _PIPEB_DATA_M_G4X 0x71050
/* Transfer unit size for display port - 1, default is 0x3f (for TU size 64) */
#define TU_SIZE(x) (((x)-1) << 25) /* default size 64 */
+#define TU_SIZE_SHIFT 25
#define TU_SIZE_MASK (0x3f << 25)
#define DATA_LINK_M_N_MASK (0xffffff)
#define DATA_LINK_N_MAX (0x800000)
-#define _PIPEA_GMCH_DATA_N 0x70054
-#define _PIPEB_GMCH_DATA_N 0x71054
+#define _PIPEA_DATA_N_G4X 0x70054
+#define _PIPEB_DATA_N_G4X 0x71054
+#define PIPE_GMCH_DATA_N_MASK (0xffffff)
/*
* Computing Link M and N values for the Display Port link
* Attributes and VB-ID.
*/
-#define _PIPEA_DP_LINK_M 0x70060
-#define _PIPEB_DP_LINK_M 0x71060
+#define _PIPEA_LINK_M_G4X 0x70060
+#define _PIPEB_LINK_M_G4X 0x71060
+#define PIPEA_DP_LINK_M_MASK (0xffffff)
-#define _PIPEA_DP_LINK_N 0x70064
-#define _PIPEB_DP_LINK_N 0x71064
+#define _PIPEA_LINK_N_G4X 0x70064
+#define _PIPEB_LINK_N_G4X 0x71064
+#define PIPEA_DP_LINK_N_MASK (0xffffff)
-#define PIPE_GMCH_DATA_M(pipe) _PIPE(pipe, _PIPEA_GMCH_DATA_M, _PIPEB_GMCH_DATA_M)
-#define PIPE_GMCH_DATA_N(pipe) _PIPE(pipe, _PIPEA_GMCH_DATA_N, _PIPEB_GMCH_DATA_N)
-#define PIPE_DP_LINK_M(pipe) _PIPE(pipe, _PIPEA_DP_LINK_M, _PIPEB_DP_LINK_M)
-#define PIPE_DP_LINK_N(pipe) _PIPE(pipe, _PIPEA_DP_LINK_N, _PIPEB_DP_LINK_N)
+#define PIPE_DATA_M_G4X(pipe) _PIPE(pipe, _PIPEA_DATA_M_G4X, _PIPEB_DATA_M_G4X)
+#define PIPE_DATA_N_G4X(pipe) _PIPE(pipe, _PIPEA_DATA_N_G4X, _PIPEB_DATA_N_G4X)
+#define PIPE_LINK_M_G4X(pipe) _PIPE(pipe, _PIPEA_LINK_M_G4X, _PIPEB_LINK_M_G4X)
+#define PIPE_LINK_N_G4X(pipe) _PIPE(pipe, _PIPEA_LINK_N_G4X, _PIPEB_LINK_N_G4X)
/* Display & cursor control */
#define PIPECONF_INTERLACED_ILK (3 << 21)
#define PIPECONF_INTERLACED_DBL_ILK (4 << 21) /* ilk/snb only */
#define PIPECONF_PFIT_PF_INTERLACED_DBL_ILK (5 << 21) /* ilk/snb only */
+#define PIPECONF_INTERLACE_MODE_MASK (7 << 21)
#define PIPECONF_CXSR_DOWNCLOCK (1<<16)
#define PIPECONF_COLOR_RANGE_SELECT (1 << 13)
#define PIPECONF_BPC_MASK (0x7 << 5)
#define WM3S_LP_IVB 0x45128
#define WM1S_LP_EN (1<<31)
+#define HSW_WM_LP_VAL(lat, fbc, pri, cur) \
+ (WM3_LP_EN | ((lat) << WM1_LP_LATENCY_SHIFT) | \
+ ((fbc) << WM1_LP_FBC_SHIFT) | ((pri) << WM1_LP_SR_SHIFT) | (cur))
+
/* Memory latency timer register */
#define MLTR_ILK 0x11222
#define MLTR_WM1_SHIFT 0
#define SPRGAMC(pipe) _PIPE(pipe, _SPRA_GAMC, _SPRB_GAMC)
#define SPRSURFLIVE(pipe) _PIPE(pipe, _SPRA_SURFLIVE, _SPRB_SURFLIVE)
-#define _SPACNTR 0x72180
+#define _SPACNTR (VLV_DISPLAY_BASE + 0x72180)
#define SP_ENABLE (1<<31)
#define SP_GEAMMA_ENABLE (1<<30)
#define SP_PIXFORMAT_MASK (0xf<<26)
#define SP_YUV_ORDER_YVYU (2<<16)
#define SP_YUV_ORDER_VYUY (3<<16)
#define SP_TILED (1<<10)
-#define _SPALINOFF 0x72184
-#define _SPASTRIDE 0x72188
-#define _SPAPOS 0x7218c
-#define _SPASIZE 0x72190
-#define _SPAKEYMINVAL 0x72194
-#define _SPAKEYMSK 0x72198
-#define _SPASURF 0x7219c
-#define _SPAKEYMAXVAL 0x721a0
-#define _SPATILEOFF 0x721a4
-#define _SPACONSTALPHA 0x721a8
-#define _SPAGAMC 0x721f4
-
-#define _SPBCNTR 0x72280
-#define _SPBLINOFF 0x72284
-#define _SPBSTRIDE 0x72288
-#define _SPBPOS 0x7228c
-#define _SPBSIZE 0x72290
-#define _SPBKEYMINVAL 0x72294
-#define _SPBKEYMSK 0x72298
-#define _SPBSURF 0x7229c
-#define _SPBKEYMAXVAL 0x722a0
-#define _SPBTILEOFF 0x722a4
-#define _SPBCONSTALPHA 0x722a8
-#define _SPBGAMC 0x722f4
+#define _SPALINOFF (VLV_DISPLAY_BASE + 0x72184)
+#define _SPASTRIDE (VLV_DISPLAY_BASE + 0x72188)
+#define _SPAPOS (VLV_DISPLAY_BASE + 0x7218c)
+#define _SPASIZE (VLV_DISPLAY_BASE + 0x72190)
+#define _SPAKEYMINVAL (VLV_DISPLAY_BASE + 0x72194)
+#define _SPAKEYMSK (VLV_DISPLAY_BASE + 0x72198)
+#define _SPASURF (VLV_DISPLAY_BASE + 0x7219c)
+#define _SPAKEYMAXVAL (VLV_DISPLAY_BASE + 0x721a0)
+#define _SPATILEOFF (VLV_DISPLAY_BASE + 0x721a4)
+#define _SPACONSTALPHA (VLV_DISPLAY_BASE + 0x721a8)
+#define _SPAGAMC (VLV_DISPLAY_BASE + 0x721f4)
+
+#define _SPBCNTR (VLV_DISPLAY_BASE + 0x72280)
+#define _SPBLINOFF (VLV_DISPLAY_BASE + 0x72284)
+#define _SPBSTRIDE (VLV_DISPLAY_BASE + 0x72288)
+#define _SPBPOS (VLV_DISPLAY_BASE + 0x7228c)
+#define _SPBSIZE (VLV_DISPLAY_BASE + 0x72290)
+#define _SPBKEYMINVAL (VLV_DISPLAY_BASE + 0x72294)
+#define _SPBKEYMSK (VLV_DISPLAY_BASE + 0x72298)
+#define _SPBSURF (VLV_DISPLAY_BASE + 0x7229c)
+#define _SPBKEYMAXVAL (VLV_DISPLAY_BASE + 0x722a0)
+#define _SPBTILEOFF (VLV_DISPLAY_BASE + 0x722a4)
+#define _SPBCONSTALPHA (VLV_DISPLAY_BASE + 0x722a8)
+#define _SPBGAMC (VLV_DISPLAY_BASE + 0x722f4)
#define SPCNTR(pipe, plane) _PIPE(pipe * 2 + plane, _SPACNTR, _SPBCNTR)
#define SPLINOFF(pipe, plane) _PIPE(pipe * 2 + plane, _SPALINOFF, _SPBLINOFF)
#define _LGC_PALETTE_B 0x4a800
#define LGC_PALETTE(pipe) _PIPE(pipe, _LGC_PALETTE_A, _LGC_PALETTE_B)
+#define _GAMMA_MODE_A 0x4a480
+#define _GAMMA_MODE_B 0x4ac80
+#define GAMMA_MODE(pipe) _PIPE(pipe, _GAMMA_MODE_A, _GAMMA_MODE_B)
+#define GAMMA_MODE_MODE_MASK (3 << 0)
+#define GAMMA_MODE_MODE_8BIT (0 << 0)
+#define GAMMA_MODE_MODE_10BIT (1 << 0)
+#define GAMMA_MODE_MODE_12BIT (2 << 0)
+#define GAMMA_MODE_MODE_SPLIT (3 << 0)
+
/* interrupts */
#define DE_MASTER_IRQ_CONTROL (1 << 31)
#define DE_SPRITEB_FLIP_DONE (1 << 29)
#define DE_PIPEA_FIFO_UNDERRUN (1 << 0)
/* More Ivybridge lolz */
-#define DE_ERR_DEBUG_IVB (1<<30)
+#define DE_ERR_INT_IVB (1<<30)
#define DE_GSE_IVB (1<<29)
#define DE_PCH_EVENT_IVB (1<<28)
#define DE_DP_A_HOTPLUG_IVB (1<<27)
#define DEIIR 0x44008
#define DEIER 0x4400c
-/* GT interrupt.
- * Note that for gen6+ the ring-specific interrupt bits do alias with the
- * corresponding bits in the per-ring interrupt control registers. */
-#define GT_GEN6_BLT_FLUSHDW_NOTIFY_INTERRUPT (1 << 26)
-#define GT_GEN6_BLT_CS_ERROR_INTERRUPT (1 << 25)
-#define GT_GEN6_BLT_USER_INTERRUPT (1 << 22)
-#define GT_GEN6_BSD_CS_ERROR_INTERRUPT (1 << 15)
-#define GT_GEN6_BSD_USER_INTERRUPT (1 << 12)
-#define GT_BSD_USER_INTERRUPT (1 << 5) /* ilk only */
-#define GT_GEN7_L3_PARITY_ERROR_INTERRUPT (1 << 5)
-#define GT_PIPE_NOTIFY (1 << 4)
-#define GT_RENDER_CS_ERROR_INTERRUPT (1 << 3)
-#define GT_SYNC_STATUS (1 << 2)
-#define GT_USER_INTERRUPT (1 << 0)
-
#define GTISR 0x44010
#define GTIMR 0x44014
#define GTIIR 0x44018
# define CHICKEN3_DGMG_REQ_OUT_FIX_DISABLE (1 << 5)
# define CHICKEN3_DGMG_DONE_FIX_DISABLE (1 << 2)
+#define CHICKEN_PAR1_1 0x42080
+#define FORCE_ARB_IDLE_PLANES (1 << 14)
+
#define DISP_ARB_CTL 0x45000
#define DISP_TILE_SURFACE_SWIZZLING (1<<13)
#define DISP_FBC_WM_DIS (1<<15)
SDE_PORTC_HOTPLUG_CPT | \
SDE_PORTB_HOTPLUG_CPT)
#define SDE_GMBUS_CPT (1 << 17)
+#define SDE_ERROR_CPT (1 << 16)
#define SDE_AUDIO_CP_REQ_C_CPT (1 << 10)
#define SDE_AUDIO_CP_CHG_C_CPT (1 << 9)
#define SDE_FDI_RXC_CPT (1 << 8)
#define SDEIIR 0xc4008
#define SDEIER 0xc400c
+#define SERR_INT 0xc4040
+#define SERR_INT_POISON (1<<31)
+#define SERR_INT_TRANS_C_FIFO_UNDERRUN (1<<6)
+#define SERR_INT_TRANS_B_FIFO_UNDERRUN (1<<3)
+#define SERR_INT_TRANS_A_FIFO_UNDERRUN (1<<0)
+
/* digital port hotplug */
#define PCH_PORT_HOTPLUG 0xc4030 /* SHOTPLUG_CTL */
#define PORTD_HOTPLUG_ENABLE (1 << 20)
#define _PCH_DPLL_A 0xc6014
#define _PCH_DPLL_B 0xc6018
-#define _PCH_DPLL(pll) (pll == 0 ? _PCH_DPLL_A : _PCH_DPLL_B)
+#define PCH_DPLL(pll) (pll == 0 ? _PCH_DPLL_A : _PCH_DPLL_B)
#define _PCH_FPA0 0xc6040
#define FP_CB_TUNE (0x3<<22)
#define _PCH_FPA1 0xc6044
#define _PCH_FPB0 0xc6048
#define _PCH_FPB1 0xc604c
-#define _PCH_FP0(pll) (pll == 0 ? _PCH_FPA0 : _PCH_FPB0)
-#define _PCH_FP1(pll) (pll == 0 ? _PCH_FPA1 : _PCH_FPB1)
+#define PCH_FP0(pll) (pll == 0 ? _PCH_FPA0 : _PCH_FPB0)
+#define PCH_FP1(pll) (pll == 0 ? _PCH_FPA1 : _PCH_FPB1)
#define PCH_DPLL_TEST 0xc606c
#define PCH_SSC4_AUX_PARMS 0xc6214
#define PCH_DPLL_SEL 0xc7000
-#define TRANSA_DPLL_ENABLE (1<<3)
-#define TRANSA_DPLLB_SEL (1<<0)
-#define TRANSA_DPLLA_SEL 0
-#define TRANSB_DPLL_ENABLE (1<<7)
-#define TRANSB_DPLLB_SEL (1<<4)
-#define TRANSB_DPLLA_SEL (0)
-#define TRANSC_DPLL_ENABLE (1<<11)
-#define TRANSC_DPLLB_SEL (1<<8)
-#define TRANSC_DPLLA_SEL (0)
+#define TRANS_DPLLB_SEL(pipe) (1 << (pipe * 4))
+#define TRANS_DPLLA_SEL(pipe) 0
+#define TRANS_DPLL_ENABLE(pipe) (1 << (pipe * 4 + 3))
/* transcoder */
-#define _TRANS_HTOTAL_A 0xe0000
-#define TRANS_HTOTAL_SHIFT 16
-#define TRANS_HACTIVE_SHIFT 0
-#define _TRANS_HBLANK_A 0xe0004
-#define TRANS_HBLANK_END_SHIFT 16
-#define TRANS_HBLANK_START_SHIFT 0
-#define _TRANS_HSYNC_A 0xe0008
-#define TRANS_HSYNC_END_SHIFT 16
-#define TRANS_HSYNC_START_SHIFT 0
-#define _TRANS_VTOTAL_A 0xe000c
-#define TRANS_VTOTAL_SHIFT 16
-#define TRANS_VACTIVE_SHIFT 0
-#define _TRANS_VBLANK_A 0xe0010
-#define TRANS_VBLANK_END_SHIFT 16
-#define TRANS_VBLANK_START_SHIFT 0
-#define _TRANS_VSYNC_A 0xe0014
-#define TRANS_VSYNC_END_SHIFT 16
-#define TRANS_VSYNC_START_SHIFT 0
-#define _TRANS_VSYNCSHIFT_A 0xe0028
-
-#define _TRANSA_DATA_M1 0xe0030
-#define _TRANSA_DATA_N1 0xe0034
-#define _TRANSA_DATA_M2 0xe0038
-#define _TRANSA_DATA_N2 0xe003c
-#define _TRANSA_DP_LINK_M1 0xe0040
-#define _TRANSA_DP_LINK_N1 0xe0044
-#define _TRANSA_DP_LINK_M2 0xe0048
-#define _TRANSA_DP_LINK_N2 0xe004c
+#define _PCH_TRANS_HTOTAL_A 0xe0000
+#define TRANS_HTOTAL_SHIFT 16
+#define TRANS_HACTIVE_SHIFT 0
+#define _PCH_TRANS_HBLANK_A 0xe0004
+#define TRANS_HBLANK_END_SHIFT 16
+#define TRANS_HBLANK_START_SHIFT 0
+#define _PCH_TRANS_HSYNC_A 0xe0008
+#define TRANS_HSYNC_END_SHIFT 16
+#define TRANS_HSYNC_START_SHIFT 0
+#define _PCH_TRANS_VTOTAL_A 0xe000c
+#define TRANS_VTOTAL_SHIFT 16
+#define TRANS_VACTIVE_SHIFT 0
+#define _PCH_TRANS_VBLANK_A 0xe0010
+#define TRANS_VBLANK_END_SHIFT 16
+#define TRANS_VBLANK_START_SHIFT 0
+#define _PCH_TRANS_VSYNC_A 0xe0014
+#define TRANS_VSYNC_END_SHIFT 16
+#define TRANS_VSYNC_START_SHIFT 0
+#define _PCH_TRANS_VSYNCSHIFT_A 0xe0028
+
+#define _PCH_TRANSA_DATA_M1 0xe0030
+#define _PCH_TRANSA_DATA_N1 0xe0034
+#define _PCH_TRANSA_DATA_M2 0xe0038
+#define _PCH_TRANSA_DATA_N2 0xe003c
+#define _PCH_TRANSA_LINK_M1 0xe0040
+#define _PCH_TRANSA_LINK_N1 0xe0044
+#define _PCH_TRANSA_LINK_M2 0xe0048
+#define _PCH_TRANSA_LINK_N2 0xe004c
/* Per-transcoder DIP controls */
#define HSW_TVIDEO_DIP_VSC_DATA(trans) \
_TRANSCODER(trans, HSW_VIDEO_DIP_VSC_DATA_A, HSW_VIDEO_DIP_VSC_DATA_B)
-#define _TRANS_HTOTAL_B 0xe1000
-#define _TRANS_HBLANK_B 0xe1004
-#define _TRANS_HSYNC_B 0xe1008
-#define _TRANS_VTOTAL_B 0xe100c
-#define _TRANS_VBLANK_B 0xe1010
-#define _TRANS_VSYNC_B 0xe1014
-#define _TRANS_VSYNCSHIFT_B 0xe1028
-
-#define TRANS_HTOTAL(pipe) _PIPE(pipe, _TRANS_HTOTAL_A, _TRANS_HTOTAL_B)
-#define TRANS_HBLANK(pipe) _PIPE(pipe, _TRANS_HBLANK_A, _TRANS_HBLANK_B)
-#define TRANS_HSYNC(pipe) _PIPE(pipe, _TRANS_HSYNC_A, _TRANS_HSYNC_B)
-#define TRANS_VTOTAL(pipe) _PIPE(pipe, _TRANS_VTOTAL_A, _TRANS_VTOTAL_B)
-#define TRANS_VBLANK(pipe) _PIPE(pipe, _TRANS_VBLANK_A, _TRANS_VBLANK_B)
-#define TRANS_VSYNC(pipe) _PIPE(pipe, _TRANS_VSYNC_A, _TRANS_VSYNC_B)
-#define TRANS_VSYNCSHIFT(pipe) _PIPE(pipe, _TRANS_VSYNCSHIFT_A, \
- _TRANS_VSYNCSHIFT_B)
-
-#define _TRANSB_DATA_M1 0xe1030
-#define _TRANSB_DATA_N1 0xe1034
-#define _TRANSB_DATA_M2 0xe1038
-#define _TRANSB_DATA_N2 0xe103c
-#define _TRANSB_DP_LINK_M1 0xe1040
-#define _TRANSB_DP_LINK_N1 0xe1044
-#define _TRANSB_DP_LINK_M2 0xe1048
-#define _TRANSB_DP_LINK_N2 0xe104c
-
-#define TRANSDATA_M1(pipe) _PIPE(pipe, _TRANSA_DATA_M1, _TRANSB_DATA_M1)
-#define TRANSDATA_N1(pipe) _PIPE(pipe, _TRANSA_DATA_N1, _TRANSB_DATA_N1)
-#define TRANSDATA_M2(pipe) _PIPE(pipe, _TRANSA_DATA_M2, _TRANSB_DATA_M2)
-#define TRANSDATA_N2(pipe) _PIPE(pipe, _TRANSA_DATA_N2, _TRANSB_DATA_N2)
-#define TRANSDPLINK_M1(pipe) _PIPE(pipe, _TRANSA_DP_LINK_M1, _TRANSB_DP_LINK_M1)
-#define TRANSDPLINK_N1(pipe) _PIPE(pipe, _TRANSA_DP_LINK_N1, _TRANSB_DP_LINK_N1)
-#define TRANSDPLINK_M2(pipe) _PIPE(pipe, _TRANSA_DP_LINK_M2, _TRANSB_DP_LINK_M2)
-#define TRANSDPLINK_N2(pipe) _PIPE(pipe, _TRANSA_DP_LINK_N2, _TRANSB_DP_LINK_N2)
-
-#define _TRANSACONF 0xf0008
-#define _TRANSBCONF 0xf1008
-#define TRANSCONF(plane) _PIPE(plane, _TRANSACONF, _TRANSBCONF)
+#define _PCH_TRANS_HTOTAL_B 0xe1000
+#define _PCH_TRANS_HBLANK_B 0xe1004
+#define _PCH_TRANS_HSYNC_B 0xe1008
+#define _PCH_TRANS_VTOTAL_B 0xe100c
+#define _PCH_TRANS_VBLANK_B 0xe1010
+#define _PCH_TRANS_VSYNC_B 0xe1014
+#define _PCH_TRANS_VSYNCSHIFT_B 0xe1028
+
+#define PCH_TRANS_HTOTAL(pipe) _PIPE(pipe, _PCH_TRANS_HTOTAL_A, _PCH_TRANS_HTOTAL_B)
+#define PCH_TRANS_HBLANK(pipe) _PIPE(pipe, _PCH_TRANS_HBLANK_A, _PCH_TRANS_HBLANK_B)
+#define PCH_TRANS_HSYNC(pipe) _PIPE(pipe, _PCH_TRANS_HSYNC_A, _PCH_TRANS_HSYNC_B)
+#define PCH_TRANS_VTOTAL(pipe) _PIPE(pipe, _PCH_TRANS_VTOTAL_A, _PCH_TRANS_VTOTAL_B)
+#define PCH_TRANS_VBLANK(pipe) _PIPE(pipe, _PCH_TRANS_VBLANK_A, _PCH_TRANS_VBLANK_B)
+#define PCH_TRANS_VSYNC(pipe) _PIPE(pipe, _PCH_TRANS_VSYNC_A, _PCH_TRANS_VSYNC_B)
+#define PCH_TRANS_VSYNCSHIFT(pipe) _PIPE(pipe, _PCH_TRANS_VSYNCSHIFT_A, \
+ _PCH_TRANS_VSYNCSHIFT_B)
+
+#define _PCH_TRANSB_DATA_M1 0xe1030
+#define _PCH_TRANSB_DATA_N1 0xe1034
+#define _PCH_TRANSB_DATA_M2 0xe1038
+#define _PCH_TRANSB_DATA_N2 0xe103c
+#define _PCH_TRANSB_LINK_M1 0xe1040
+#define _PCH_TRANSB_LINK_N1 0xe1044
+#define _PCH_TRANSB_LINK_M2 0xe1048
+#define _PCH_TRANSB_LINK_N2 0xe104c
+
+#define PCH_TRANS_DATA_M1(pipe) _PIPE(pipe, _PCH_TRANSA_DATA_M1, _PCH_TRANSB_DATA_M1)
+#define PCH_TRANS_DATA_N1(pipe) _PIPE(pipe, _PCH_TRANSA_DATA_N1, _PCH_TRANSB_DATA_N1)
+#define PCH_TRANS_DATA_M2(pipe) _PIPE(pipe, _PCH_TRANSA_DATA_M2, _PCH_TRANSB_DATA_M2)
+#define PCH_TRANS_DATA_N2(pipe) _PIPE(pipe, _PCH_TRANSA_DATA_N2, _PCH_TRANSB_DATA_N2)
+#define PCH_TRANS_LINK_M1(pipe) _PIPE(pipe, _PCH_TRANSA_LINK_M1, _PCH_TRANSB_LINK_M1)
+#define PCH_TRANS_LINK_N1(pipe) _PIPE(pipe, _PCH_TRANSA_LINK_N1, _PCH_TRANSB_LINK_N1)
+#define PCH_TRANS_LINK_M2(pipe) _PIPE(pipe, _PCH_TRANSA_LINK_M2, _PCH_TRANSB_LINK_M2)
+#define PCH_TRANS_LINK_N2(pipe) _PIPE(pipe, _PCH_TRANSA_LINK_N2, _PCH_TRANSB_LINK_N2)
+
+#define _PCH_TRANSACONF 0xf0008
+#define _PCH_TRANSBCONF 0xf1008
+#define PCH_TRANSCONF(pipe) _PIPE(pipe, _PCH_TRANSACONF, _PCH_TRANSBCONF)
+#define LPT_TRANSCONF _PCH_TRANSACONF /* lpt has only one transcoder */
#define TRANS_DISABLE (0<<31)
#define TRANS_ENABLE (1<<31)
#define TRANS_STATE_MASK (1<<30)
#define FDI_LINK_TRAIN_600MV_3_5DB_SNB_B (0x39<<22)
#define FDI_LINK_TRAIN_800MV_0DB_SNB_B (0x38<<22)
#define FDI_LINK_TRAIN_VOL_EMP_MASK (0x3f<<22)
-#define FDI_DP_PORT_WIDTH_X1 (0<<19)
-#define FDI_DP_PORT_WIDTH_X2 (1<<19)
-#define FDI_DP_PORT_WIDTH_X3 (2<<19)
-#define FDI_DP_PORT_WIDTH_X4 (3<<19)
+#define FDI_DP_PORT_WIDTH_SHIFT 19
+#define FDI_DP_PORT_WIDTH_MASK (7 << FDI_DP_PORT_WIDTH_SHIFT)
+#define FDI_DP_PORT_WIDTH(width) (((width) - 1) << FDI_DP_PORT_WIDTH_SHIFT)
#define FDI_TX_ENHANCE_FRAME_ENABLE (1<<18)
/* Ironlake: hardwired to 1 */
#define FDI_TX_PLL_ENABLE (1<<14)
/* train, dp width same as FDI_TX */
#define FDI_FS_ERRC_ENABLE (1<<27)
#define FDI_FE_ERRC_ENABLE (1<<26)
-#define FDI_DP_PORT_WIDTH_X8 (7<<19)
#define FDI_RX_POLARITY_REVERSED_LPT (1<<16)
#define FDI_8BPC (0<<16)
#define FDI_10BPC (1<<16)
#define FDI_LINK_TRAIN_PATTERN_IDLE_CPT (2<<8)
#define FDI_LINK_TRAIN_NORMAL_CPT (3<<8)
#define FDI_LINK_TRAIN_PATTERN_MASK_CPT (3<<8)
-/* LPT */
-#define FDI_PORT_WIDTH_2X_LPT (1<<19)
-#define FDI_PORT_WIDTH_1X_LPT (0<<19)
#define _FDI_RXA_MISC 0xf0010
#define _FDI_RXB_MISC 0xf1010
#define GEN6_RC_CTL_RC6_ENABLE (1<<18)
#define GEN6_RC_CTL_RC1e_ENABLE (1<<20)
#define GEN6_RC_CTL_RC7_ENABLE (1<<22)
+#define GEN7_RC_CTL_TO_MODE (1<<28)
#define GEN6_RC_CTL_EI_MODE(x) ((x)<<27)
#define GEN6_RC_CTL_HW_ENABLE (1<<31)
#define GEN6_RP_DOWN_TIMEOUT 0xA010
#define GEN6_PM_RP_DOWN_THRESHOLD (1<<4)
#define GEN6_PM_RP_UP_EI_EXPIRED (1<<2)
#define GEN6_PM_RP_DOWN_EI_EXPIRED (1<<1)
-#define GEN6_PM_DEFERRED_EVENTS (GEN6_PM_RP_UP_THRESHOLD | \
+#define GEN6_PM_RPS_EVENTS (GEN6_PM_RP_UP_THRESHOLD | \
GEN6_PM_RP_DOWN_THRESHOLD | \
GEN6_PM_RP_DOWN_TIMEOUT)
#define GEN6_PCODE_FREQ_IA_RATIO_SHIFT 8
#define GEN6_PCODE_FREQ_RING_RATIO_SHIFT 16
-#define VLV_IOSF_DOORBELL_REQ 0x182100
-#define IOSF_DEVFN_SHIFT 24
-#define IOSF_OPCODE_SHIFT 16
-#define IOSF_PORT_SHIFT 8
-#define IOSF_BYTE_ENABLES_SHIFT 4
-#define IOSF_BAR_SHIFT 1
-#define IOSF_SB_BUSY (1<<0)
-#define IOSF_PORT_PUNIT 0x4
-#define VLV_IOSF_DATA 0x182104
-#define VLV_IOSF_ADDR 0x182108
-
-#define PUNIT_OPCODE_REG_READ 6
-#define PUNIT_OPCODE_REG_WRITE 7
-
#define GEN6_GT_CORE_STATUS 0x138060
#define GEN6_CORE_CPD_STATE_MASK (7<<4)
#define GEN6_RCn_MASK 7
#define TRANS_DDI_EDP_INPUT_B_ONOFF (5<<12)
#define TRANS_DDI_EDP_INPUT_C_ONOFF (6<<12)
#define TRANS_DDI_BFI_ENABLE (1<<4)
-#define TRANS_DDI_PORT_WIDTH_X1 (0<<1)
-#define TRANS_DDI_PORT_WIDTH_X2 (1<<1)
-#define TRANS_DDI_PORT_WIDTH_X4 (3<<1)
/* DisplayPort Transport Control */
#define DP_TP_CTL_A 0x64040
#define DDI_BUF_PORT_REVERSAL (1<<16)
#define DDI_BUF_IS_IDLE (1<<7)
#define DDI_A_4_LANES (1<<4)
-#define DDI_PORT_WIDTH_X1 (0<<1)
-#define DDI_PORT_WIDTH_X2 (1<<1)
-#define DDI_PORT_WIDTH_X4 (3<<1)
+#define DDI_PORT_WIDTH(width) (((width) - 1) << 1)
#define DDI_INIT_DISPLAY_DETECTED (1<<0)
/* DDI Buffer Translations */
#define SFUSE_STRAP_DDIC_DETECTED (1<<1)
#define SFUSE_STRAP_DDID_DETECTED (1<<0)
+#define WM_MISC 0x45260
+#define WM_MISC_DATA_PARTITION_5_6 (1 << 0)
+
#define WM_DBG 0x45280
#define WM_DBG_DISALLOW_MULTIPLE_LP (1<<0)
#define WM_DBG_DISALLOW_MAXFIFO (1<<1)
#define _PIPE_A_CSC_COEFF_RV_GV 0x49020
#define _PIPE_A_CSC_COEFF_BV 0x49024
#define _PIPE_A_CSC_MODE 0x49028
+#define CSC_BLACK_SCREEN_OFFSET (1 << 2)
+#define CSC_POSITION_BEFORE_GAMMA (1 << 1)
+#define CSC_MODE_YUV_TO_RGB (1 << 0)
#define _PIPE_A_CSC_PREOFF_HI 0x49030
#define _PIPE_A_CSC_PREOFF_ME 0x49034
#define _PIPE_A_CSC_PREOFF_LO 0x49038
#define _PIPE_B_CSC_POSTOFF_ME 0x49144
#define _PIPE_B_CSC_POSTOFF_LO 0x49148
-#define CSC_BLACK_SCREEN_OFFSET (1 << 2)
-#define CSC_POSITION_BEFORE_GAMMA (1 << 1)
-#define CSC_MODE_YUV_TO_RGB (1 << 0)
-
#define PIPE_CSC_COEFF_RY_GY(pipe) _PIPE(pipe, _PIPE_A_CSC_COEFF_RY_GY, _PIPE_B_CSC_COEFF_RY_GY)
#define PIPE_CSC_COEFF_BY(pipe) _PIPE(pipe, _PIPE_A_CSC_COEFF_BY, _PIPE_B_CSC_COEFF_BY)
#define PIPE_CSC_COEFF_RU_GU(pipe) _PIPE(pipe, _PIPE_A_CSC_COEFF_RU_GU, _PIPE_B_CSC_COEFF_RU_GU)