intel_range_t dot, vco, n, m, m1, m2, p, p1;
intel_p2_t p2;
bool (* find_pll)(const intel_limit_t *, struct drm_crtc *,
- int, int, intel_clock_t *);
+ int, int, intel_clock_t *, intel_clock_t *);
};
/* FDI */
static bool
intel_find_best_PLL(const intel_limit_t *limit, struct drm_crtc *crtc,
- int target, int refclk, intel_clock_t *best_clock);
+ int target, int refclk, intel_clock_t *match_clock,
+ intel_clock_t *best_clock);
static bool
intel_g4x_find_best_PLL(const intel_limit_t *limit, struct drm_crtc *crtc,
- int target, int refclk, intel_clock_t *best_clock);
+ int target, int refclk, intel_clock_t *match_clock,
+ intel_clock_t *best_clock);
static bool
intel_find_pll_g4x_dp(const intel_limit_t *, struct drm_crtc *crtc,
- int target, int refclk, intel_clock_t *best_clock);
+ int target, int refclk, intel_clock_t *match_clock,
+ intel_clock_t *best_clock);
static bool
intel_find_pll_ironlake_dp(const intel_limit_t *, struct drm_crtc *crtc,
- int target, int refclk, intel_clock_t *best_clock);
+ int target, int refclk, intel_clock_t *match_clock,
+ intel_clock_t *best_clock);
static inline u32 /* units of 100MHz */
intel_fdi_link_freq(struct drm_device *dev)
static bool
intel_find_best_PLL(const intel_limit_t *limit, struct drm_crtc *crtc,
- int target, int refclk, intel_clock_t *best_clock)
+ int target, int refclk, intel_clock_t *match_clock,
+ intel_clock_t *best_clock)
{
struct drm_device *dev = crtc->dev;
if (!intel_PLL_is_valid(dev, limit,
&clock))
continue;
+ if (match_clock &&
+ clock.p != match_clock->p)
+ continue;
this_err = abs(clock.dot - target);
if (this_err < err) {
static bool
intel_g4x_find_best_PLL(const intel_limit_t *limit, struct drm_crtc *crtc,
- int target, int refclk, intel_clock_t *best_clock)
+ int target, int refclk, intel_clock_t *match_clock,
+ intel_clock_t *best_clock)
{
struct drm_device *dev = crtc->dev;
struct drm_i915_private *dev_priv = dev->dev_private;
if (!intel_PLL_is_valid(dev, limit,
&clock))
continue;
+ if (match_clock &&
+ clock.p != match_clock->p)
+ continue;
this_err = abs(clock.dot - target);
if (this_err < err_most) {
static bool
intel_find_pll_ironlake_dp(const intel_limit_t *limit, struct drm_crtc *crtc,
- int target, int refclk, intel_clock_t *best_clock)
+ int target, int refclk, intel_clock_t *match_clock,
+ intel_clock_t *best_clock)
{
struct drm_device *dev = crtc->dev;
intel_clock_t clock;
/* DisplayPort has only two frequencies, 162MHz and 270MHz */
static bool
intel_find_pll_g4x_dp(const intel_limit_t *limit, struct drm_crtc *crtc,
- int target, int refclk, intel_clock_t *best_clock)
+ int target, int refclk, intel_clock_t *match_clock,
+ intel_clock_t *best_clock)
{
intel_clock_t clock;
if (target < 200000) {
u32 val;
bool cur_state;
+ /* if we need the pipe A quirk it must be always on */
+ if (pipe == PIPE_A && dev_priv->quirks & QUIRK_PIPEA_FORCE)
+ state = true;
+
reg = PIPECONF(pipe);
val = I915_READ(reg);
cur_state = !!(val & PIPECONF_ENABLE);
pipe_name(pipe), state_string(state), state_string(cur_state));
}
-static void assert_plane_enabled(struct drm_i915_private *dev_priv,
- enum plane plane)
+static void assert_plane(struct drm_i915_private *dev_priv,
+ enum plane plane, bool state)
{
int reg;
u32 val;
+ bool cur_state;
reg = DSPCNTR(plane);
val = I915_READ(reg);
- WARN(!(val & DISPLAY_PLANE_ENABLE),
- "plane %c assertion failure, should be active but is disabled\n",
- plane_name(plane));
+ cur_state = !!(val & DISPLAY_PLANE_ENABLE);
+ WARN(cur_state != state,
+ "plane %c assertion failure (expected %s, current %s)\n",
+ plane_name(plane), state_string(state), state_string(cur_state));
}
+#define assert_plane_enabled(d, p) assert_plane(d, p, true)
+#define assert_plane_disabled(d, p) assert_plane(d, p, false)
+
static void assert_planes_disabled(struct drm_i915_private *dev_priv,
enum pipe pipe)
{
int cur_pipe;
/* Planes are fixed to pipes on ILK+ */
- if (HAS_PCH_SPLIT(dev_priv->dev))
+ if (HAS_PCH_SPLIT(dev_priv->dev)) {
+ reg = DSPCNTR(pipe);
+ val = I915_READ(reg);
+ WARN((val & DISPLAY_PLANE_ENABLE),
+ "plane %c assertion failure, should be disabled but not\n",
+ plane_name(pipe));
return;
+ }
/* Need to check both planes against the pipe */
for (i = 0; i < 2; i++) {
{
u32 val = I915_READ(reg);
WARN(hdmi_pipe_enabled(dev_priv, val, pipe),
- "PCH DP (0x%08x) enabled on transcoder %c, should be disabled\n",
+ "PCH HDMI (0x%08x) enabled on transcoder %c, should be disabled\n",
reg, pipe_name(pipe));
}
ret = i915_gem_object_get_fence(obj, pipelined);
if (ret)
goto err_unpin;
+
+ i915_gem_object_pin_fence(obj);
}
dev_priv->mm.interruptible = true;
return ret;
}
+void intel_unpin_fb_obj(struct drm_i915_gem_object *obj)
+{
+ i915_gem_object_unpin_fence(obj);
+ i915_gem_object_unpin(obj);
+}
+
static int i9xx_update_plane(struct drm_crtc *crtc, struct drm_framebuffer *fb,
int x, int y)
{
ret = intel_pipe_set_base_atomic(crtc, crtc->fb, x, y,
LEAVE_ATOMIC_MODE_SET);
if (ret) {
- i915_gem_object_unpin(to_intel_framebuffer(crtc->fb)->obj);
+ intel_unpin_fb_obj(to_intel_framebuffer(crtc->fb)->obj);
mutex_unlock(&dev->struct_mutex);
DRM_ERROR("failed to update base address\n");
return ret;
if (old_fb) {
intel_wait_for_vblank(dev, intel_crtc->pipe);
- i915_gem_object_unpin(to_intel_framebuffer(old_fb)->obj);
+ intel_unpin_fb_obj(to_intel_framebuffer(old_fb)->obj);
}
mutex_unlock(&dev->struct_mutex);
struct drm_device *dev = crtc->dev;
crtc_funcs->dpms(crtc, DRM_MODE_DPMS_OFF);
+ assert_plane_disabled(dev->dev_private, to_intel_crtc(crtc)->plane);
+ assert_pipe_disabled(dev->dev_private, to_intel_crtc(crtc)->pipe);
if (crtc->fb) {
mutex_lock(&dev->struct_mutex);
- i915_gem_object_unpin(to_intel_framebuffer(crtc->fb)->obj);
+ intel_unpin_fb_obj(to_intel_framebuffer(crtc->fb)->obj);
mutex_unlock(&dev->struct_mutex);
}
}
{
struct drm_i915_private *dev_priv = dev->dev_private;
int latency = SNB_READ_WM0_LATENCY() * 100; /* In unit 0.1us */
+ u32 val;
int fbc_wm, plane_wm, cursor_wm;
unsigned int enabled;
&sandybridge_display_wm_info, latency,
&sandybridge_cursor_wm_info, latency,
&plane_wm, &cursor_wm)) {
- I915_WRITE(WM0_PIPEA_ILK,
- (plane_wm << WM0_PIPE_PLANE_SHIFT) | cursor_wm);
+ val = I915_READ(WM0_PIPEA_ILK);
+ val &= ~(WM0_PIPE_PLANE_MASK | WM0_PIPE_CURSOR_MASK);
+ I915_WRITE(WM0_PIPEA_ILK, val |
+ ((plane_wm << WM0_PIPE_PLANE_SHIFT) | cursor_wm));
DRM_DEBUG_KMS("FIFO watermarks For pipe A -"
" plane %d, " "cursor: %d\n",
plane_wm, cursor_wm);
&sandybridge_display_wm_info, latency,
&sandybridge_cursor_wm_info, latency,
&plane_wm, &cursor_wm)) {
- I915_WRITE(WM0_PIPEB_ILK,
- (plane_wm << WM0_PIPE_PLANE_SHIFT) | cursor_wm);
+ val = I915_READ(WM0_PIPEB_ILK);
+ val &= ~(WM0_PIPE_PLANE_MASK | WM0_PIPE_CURSOR_MASK);
+ I915_WRITE(WM0_PIPEB_ILK, val |
+ ((plane_wm << WM0_PIPE_PLANE_SHIFT) | cursor_wm));
DRM_DEBUG_KMS("FIFO watermarks For pipe B -"
" plane %d, cursor: %d\n",
plane_wm, cursor_wm);
&sandybridge_display_wm_info, latency,
&sandybridge_cursor_wm_info, latency,
&plane_wm, &cursor_wm)) {
- I915_WRITE(WM0_PIPEC_IVB,
- (plane_wm << WM0_PIPE_PLANE_SHIFT) | cursor_wm);
+ val = I915_READ(WM0_PIPEC_IVB);
+ val &= ~(WM0_PIPE_PLANE_MASK | WM0_PIPE_CURSOR_MASK);
+ I915_WRITE(WM0_PIPEC_IVB, val |
+ ((plane_wm << WM0_PIPE_PLANE_SHIFT) | cursor_wm));
DRM_DEBUG_KMS("FIFO watermarks For pipe C -"
" plane %d, cursor: %d\n",
plane_wm, cursor_wm);
{
struct drm_i915_private *dev_priv = dev->dev_private;
int latency = SNB_READ_WM0_LATENCY() * 100; /* In unit 0.1us */
+ u32 val;
int sprite_wm, reg;
int ret;
return;
}
- I915_WRITE(reg, I915_READ(reg) | (sprite_wm << WM0_PIPE_SPRITE_SHIFT));
+ val = I915_READ(reg);
+ val &= ~WM0_PIPE_SPRITE_MASK;
+ I915_WRITE(reg, val | (sprite_wm << WM0_PIPE_SPRITE_SHIFT));
DRM_DEBUG_KMS("sprite watermarks For pipe %d - %d\n", pipe, sprite_wm);
return display_bpc != bpc;
}
+static int i9xx_get_refclk(struct drm_crtc *crtc, int num_connectors)
+{
+ struct drm_device *dev = crtc->dev;
+ struct drm_i915_private *dev_priv = dev->dev_private;
+ int refclk;
+
+ if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS) &&
+ intel_panel_use_ssc(dev_priv) && num_connectors < 2) {
+ refclk = dev_priv->lvds_ssc_freq * 1000;
+ DRM_DEBUG_KMS("using SSC reference clock of %d MHz\n",
+ refclk / 1000);
+ } else if (!IS_GEN2(dev)) {
+ refclk = 96000;
+ } else {
+ refclk = 48000;
+ }
+
+ return refclk;
+}
+
+static void i9xx_adjust_sdvo_tv_clock(struct drm_display_mode *adjusted_mode,
+ intel_clock_t *clock)
+{
+ /* SDVO TV has fixed PLL values depend on its clock range,
+ this mirrors vbios setting. */
+ if (adjusted_mode->clock >= 100000
+ && adjusted_mode->clock < 140500) {
+ clock->p1 = 2;
+ clock->p2 = 10;
+ clock->n = 3;
+ clock->m1 = 16;
+ clock->m2 = 8;
+ } else if (adjusted_mode->clock >= 140500
+ && adjusted_mode->clock <= 200000) {
+ clock->p1 = 1;
+ clock->p2 = 10;
+ clock->n = 6;
+ clock->m1 = 12;
+ clock->m2 = 8;
+ }
+}
+
+static void i9xx_update_pll_dividers(struct drm_crtc *crtc,
+ intel_clock_t *clock,
+ intel_clock_t *reduced_clock)
+{
+ struct drm_device *dev = crtc->dev;
+ struct drm_i915_private *dev_priv = dev->dev_private;
+ struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
+ int pipe = intel_crtc->pipe;
+ u32 fp, fp2 = 0;
+
+ if (IS_PINEVIEW(dev)) {
+ fp = (1 << clock->n) << 16 | clock->m1 << 8 | clock->m2;
+ if (reduced_clock)
+ fp2 = (1 << reduced_clock->n) << 16 |
+ reduced_clock->m1 << 8 | reduced_clock->m2;
+ } else {
+ fp = clock->n << 16 | clock->m1 << 8 | clock->m2;
+ if (reduced_clock)
+ fp2 = reduced_clock->n << 16 | reduced_clock->m1 << 8 |
+ reduced_clock->m2;
+ }
+
+ I915_WRITE(FP0(pipe), fp);
+
+ intel_crtc->lowfreq_avail = false;
+ if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS) &&
+ reduced_clock && i915_powersave) {
+ I915_WRITE(FP1(pipe), fp2);
+ intel_crtc->lowfreq_avail = true;
+ } else {
+ I915_WRITE(FP1(pipe), fp);
+ }
+}
+
static int i9xx_crtc_mode_set(struct drm_crtc *crtc,
struct drm_display_mode *mode,
struct drm_display_mode *adjusted_mode,
int plane = intel_crtc->plane;
int refclk, num_connectors = 0;
intel_clock_t clock, reduced_clock;
- u32 dpll, fp = 0, fp2 = 0, dspcntr, pipeconf;
+ u32 dpll, dspcntr, pipeconf;
bool ok, has_reduced_clock = false, is_sdvo = false, is_dvo = false;
bool is_crt = false, is_lvds = false, is_tv = false, is_dp = false;
struct drm_mode_config *mode_config = &dev->mode_config;
num_connectors++;
}
- if (is_lvds && intel_panel_use_ssc(dev_priv) && num_connectors < 2) {
- refclk = dev_priv->lvds_ssc_freq * 1000;
- DRM_DEBUG_KMS("using SSC reference clock of %d MHz\n",
- refclk / 1000);
- } else if (!IS_GEN2(dev)) {
- refclk = 96000;
- } else {
- refclk = 48000;
- }
+ refclk = i9xx_get_refclk(crtc, num_connectors);
/*
* Returns a set of divisors for the desired target clock with the given
* reflck * (5 * (m1 + 2) + (m2 + 2)) / (n + 2) / p1 / p2.
*/
limit = intel_limit(crtc, refclk);
- ok = limit->find_pll(limit, crtc, adjusted_mode->clock, refclk, &clock);
+ ok = limit->find_pll(limit, crtc, adjusted_mode->clock, refclk, NULL,
+ &clock);
if (!ok) {
DRM_ERROR("Couldn't find PLL settings for mode!\n");
return -EINVAL;
intel_crtc_update_cursor(crtc, true);
if (is_lvds && dev_priv->lvds_downclock_avail) {
+ /*
+ * Ensure we match the reduced clock's P to the target clock.
+ * If the clocks don't match, we can't switch the display clock
+ * by using the FP0/FP1. In such case we will disable the LVDS
+ * downclock feature.
+ */
has_reduced_clock = limit->find_pll(limit, crtc,
dev_priv->lvds_downclock,
refclk,
+ &clock,
&reduced_clock);
- if (has_reduced_clock && (clock.p != reduced_clock.p)) {
- /*
- * If the different P is found, it means that we can't
- * switch the display clock by using the FP0/FP1.
- * In such case we will disable the LVDS downclock
- * feature.
- */
- DRM_DEBUG_KMS("Different P is found for "
- "LVDS clock/downclock\n");
- has_reduced_clock = 0;
- }
- }
- /* SDVO TV has fixed PLL values depend on its clock range,
- this mirrors vbios setting. */
- if (is_sdvo && is_tv) {
- if (adjusted_mode->clock >= 100000
- && adjusted_mode->clock < 140500) {
- clock.p1 = 2;
- clock.p2 = 10;
- clock.n = 3;
- clock.m1 = 16;
- clock.m2 = 8;
- } else if (adjusted_mode->clock >= 140500
- && adjusted_mode->clock <= 200000) {
- clock.p1 = 1;
- clock.p2 = 10;
- clock.n = 6;
- clock.m1 = 12;
- clock.m2 = 8;
- }
}
- if (IS_PINEVIEW(dev)) {
- fp = (1 << clock.n) << 16 | clock.m1 << 8 | clock.m2;
- if (has_reduced_clock)
- fp2 = (1 << reduced_clock.n) << 16 |
- reduced_clock.m1 << 8 | reduced_clock.m2;
- } else {
- fp = clock.n << 16 | clock.m1 << 8 | clock.m2;
- if (has_reduced_clock)
- fp2 = reduced_clock.n << 16 | reduced_clock.m1 << 8 |
- reduced_clock.m2;
- }
+ if (is_sdvo && is_tv)
+ i9xx_adjust_sdvo_tv_clock(adjusted_mode, &clock);
+
+ i9xx_update_pll_dividers(crtc, &clock, has_reduced_clock ?
+ &reduced_clock : NULL);
dpll = DPLL_VGA_MODE_DIS;
/* Set up the display plane register */
dspcntr = DISPPLANE_GAMMA_ENABLE;
- /* Ironlake's plane is forced to pipe, bit 24 is to
- enable color space conversion */
if (pipe == 0)
dspcntr &= ~DISPPLANE_SEL_PIPE_MASK;
else
DRM_DEBUG_KMS("Mode for pipe %c:\n", pipe == 0 ? 'A' : 'B');
drm_mode_debug_printmodeline(mode);
- I915_WRITE(FP0(pipe), fp);
I915_WRITE(DPLL(pipe), dpll & ~DPLL_VCO_ENABLE);
POSTING_READ(DPLL(pipe));
I915_WRITE(DPLL(pipe), dpll);
}
- intel_crtc->lowfreq_avail = false;
- if (is_lvds && has_reduced_clock && i915_powersave) {
- I915_WRITE(FP1(pipe), fp2);
- intel_crtc->lowfreq_avail = true;
- if (HAS_PIPE_CXSR(dev)) {
+ if (HAS_PIPE_CXSR(dev)) {
+ if (intel_crtc->lowfreq_avail) {
DRM_DEBUG_KMS("enabling CxSR downclocking\n");
pipeconf |= PIPECONF_CXSR_DOWNCLOCK;
- }
- } else {
- I915_WRITE(FP1(pipe), fp);
- if (HAS_PIPE_CXSR(dev)) {
+ } else {
DRM_DEBUG_KMS("disabling CxSR downclocking\n");
pipeconf &= ~PIPECONF_CXSR_DOWNCLOCK;
}
* reflck * (5 * (m1 + 2) + (m2 + 2)) / (n + 2) / p1 / p2.
*/
limit = intel_limit(crtc, refclk);
- ok = limit->find_pll(limit, crtc, adjusted_mode->clock, refclk, &clock);
+ ok = limit->find_pll(limit, crtc, adjusted_mode->clock, refclk, NULL,
+ &clock);
if (!ok) {
DRM_ERROR("Couldn't find PLL settings for mode!\n");
return -EINVAL;
intel_crtc_update_cursor(crtc, true);
if (is_lvds && dev_priv->lvds_downclock_avail) {
+ /*
+ * Ensure we match the reduced clock's P to the target clock.
+ * If the clocks don't match, we can't switch the display clock
+ * by using the FP0/FP1. In such case we will disable the LVDS
+ * downclock feature.
+ */
has_reduced_clock = limit->find_pll(limit, crtc,
dev_priv->lvds_downclock,
refclk,
+ &clock,
&reduced_clock);
- if (has_reduced_clock && (clock.p != reduced_clock.p)) {
- /*
- * If the different P is found, it means that we can't
- * switch the display clock by using the FP0/FP1.
- * In such case we will disable the LVDS downclock
- * feature.
- */
- DRM_DEBUG_KMS("Different P is found for "
- "LVDS clock/downclock\n");
- has_reduced_clock = 0;
- }
}
/* SDVO TV has fixed PLL values depend on its clock range,
this mirrors vbios setting. */
intel_wait_for_vblank(dev, pipe);
- if (IS_GEN5(dev)) {
- /* enable address swizzle for tiling buffer */
- temp = I915_READ(DISP_ARB_CTL);
- I915_WRITE(DISP_ARB_CTL, temp | DISP_TILE_SURFACE_SWIZZLING);
- }
-
I915_WRITE(DSPCNTR(plane), dspcntr);
POSTING_READ(DSPCNTR(plane));
uint32_t i;
int len;
int hdmiw_hdmiedid;
+ int aud_config;
int aud_cntl_st;
int aud_cntrl_st2;
if (HAS_PCH_IBX(connector->dev)) {
hdmiw_hdmiedid = IBX_HDMIW_HDMIEDID_A;
+ aud_config = IBX_AUD_CONFIG_A;
aud_cntl_st = IBX_AUD_CNTL_ST_A;
aud_cntrl_st2 = IBX_AUD_CNTL_ST2;
} else {
hdmiw_hdmiedid = CPT_HDMIW_HDMIEDID_A;
+ aud_config = CPT_AUD_CONFIG_A;
aud_cntl_st = CPT_AUD_CNTL_ST_A;
aud_cntrl_st2 = CPT_AUD_CNTRL_ST2;
}
i = to_intel_crtc(crtc)->pipe;
hdmiw_hdmiedid += i * 0x100;
aud_cntl_st += i * 0x100;
+ aud_config += i * 0x100;
DRM_DEBUG_DRIVER("ELD on pipe %c\n", pipe_name(i));
if (intel_pipe_has_type(crtc, INTEL_OUTPUT_DISPLAYPORT)) {
DRM_DEBUG_DRIVER("ELD: DisplayPort detected\n");
eld[5] |= (1 << 2); /* Conn_Type, 0x1 = DisplayPort */
- }
+ I915_WRITE(aud_config, AUD_CONFIG_N_VALUE_INDEX); /* 0x1 = DP */
+ } else
+ I915_WRITE(aud_config, 0);
if (intel_eld_uptodate(connector,
aud_cntrl_st2, eldv,
container_of(__work, struct intel_unpin_work, work);
mutex_lock(&work->dev->struct_mutex);
- i915_gem_object_unpin(work->old_fb_obj);
+ intel_unpin_fb_obj(work->old_fb_obj);
drm_gem_object_unreference(&work->pending_flip_obj->base);
drm_gem_object_unreference(&work->old_fb_obj->base);
MI_DISPLAY_FLIP_PLANE(intel_crtc->plane));
OUT_RING(fb->pitches[0]);
OUT_RING(obj->gtt_offset + offset);
- OUT_RING(MI_NOOP);
+ OUT_RING(0); /* aux display base address, unused */
ADVANCE_LP_RING();
out:
return ret;
case DRM_FORMAT_VYUY:
break;
default:
- DRM_ERROR("unsupported pixel format\n");
+ DRM_DEBUG_KMS("unsupported pixel format %u\n",
+ mode_cmd->pixel_format);
return -EINVAL;
}
projects / deliverable / linux.git / blobdiff