ret = 0;
if (ret == 0 && dequeue)
- drive->hwif->hwgroup->rq = NULL;
+ drive->hwif->rq = NULL;
return ret;
}
int ide_end_request (ide_drive_t *drive, int uptodate, int nr_sectors)
{
unsigned int nr_bytes = nr_sectors << 9;
- struct request *rq = drive->hwif->hwgroup->rq;
+ struct request *rq = drive->hwif->rq;
if (!nr_bytes) {
if (blk_pc_request(rq))
void ide_end_drive_cmd (ide_drive_t *drive, u8 stat, u8 err)
{
- ide_hwgroup_t *hwgroup = drive->hwif->hwgroup;
- struct request *rq = hwgroup->rq;
+ ide_hwif_t *hwif = drive->hwif;
+ struct request *rq = hwif->rq;
if (rq->cmd_type == REQ_TYPE_ATA_TASKFILE) {
ide_task_t *task = (ide_task_t *)rq->special;
return;
}
- hwgroup->rq = NULL;
+ hwif->rq = NULL;
rq->errors = err;
static void ide_kill_rq(ide_drive_t *drive, struct request *rq)
{
if (rq->rq_disk) {
- ide_driver_t *drv;
+ struct ide_driver *drv;
- drv = *(ide_driver_t **)rq->rq_disk->private_data;
+ drv = *(struct ide_driver **)rq->rq_disk->private_data;
drv->end_request(drive, 0, 0);
} else
ide_end_request(drive, 0, 0);
return ide_stopped;
}
-ide_startstop_t
+static ide_startstop_t
__ide_error(ide_drive_t *drive, struct request *rq, u8 stat, u8 err)
{
if (drive->media == ide_disk)
return ide_atapi_error(drive, rq, stat, err);
}
-EXPORT_SYMBOL_GPL(__ide_error);
-
/**
* ide_error - handle an error on the IDE
* @drive: drive the error occurred on
err = ide_dump_status(drive, msg, stat);
- if ((rq = HWGROUP(drive)->rq) == NULL)
+ rq = drive->hwif->rq;
+ if (rq == NULL)
return ide_stopped;
/* retry only "normal" I/O: */
return ide_stopped;
}
- if (rq->rq_disk) {
- ide_driver_t *drv;
-
- drv = *(ide_driver_t **)rq->rq_disk->private_data;
- return drv->error(drive, rq, stat, err);
- } else
- return __ide_error(drive, rq, stat, err);
+ return __ide_error(drive, rq, stat, err);
}
-
EXPORT_SYMBOL_GPL(ide_error);
static void ide_tf_set_specify_cmd(ide_drive_t *drive, struct ide_taskfile *tf)
static ide_startstop_t execute_drive_cmd (ide_drive_t *drive,
struct request *rq)
{
- ide_hwif_t *hwif = HWIF(drive);
+ ide_hwif_t *hwif = drive->hwif;
ide_task_t *task = rq->special;
if (task) {
#ifdef DEBUG
printk("%s: start_request: current=0x%08lx\n",
- HWIF(drive)->name, (unsigned long) rq);
+ drive->hwif->name, (unsigned long) rq);
#endif
/* bail early if we've exceeded max_failures */
return startstop;
}
if (!drive->special.all) {
- ide_driver_t *drv;
+ struct ide_driver *drv;
/*
* We reset the drive so we need to issue a SETFEATURES.
*/
return ide_special_rq(drive, rq);
- drv = *(ide_driver_t **)rq->rq_disk->private_data;
+ drv = *(struct ide_driver **)rq->rq_disk->private_data;
return drv->do_request(drive, rq, rq->sector);
}
* @timeout: time to stall for (jiffies)
*
* ide_stall_queue() can be used by a drive to give excess bandwidth back
- * to the hwgroup by sleeping for timeout jiffies.
+ * to the port by sleeping for timeout jiffies.
*/
void ide_stall_queue (ide_drive_t *drive, unsigned long timeout)
}
EXPORT_SYMBOL(ide_stall_queue);
+static inline int ide_lock_port(ide_hwif_t *hwif)
+{
+ if (hwif->busy)
+ return 1;
+
+ hwif->busy = 1;
+
+ return 0;
+}
+
+static inline void ide_unlock_port(ide_hwif_t *hwif)
+{
+ hwif->busy = 0;
+}
+
+static inline int ide_lock_host(struct ide_host *host, ide_hwif_t *hwif)
+{
+ int rc = 0;
+
+ if (host->host_flags & IDE_HFLAG_SERIALIZE) {
+ rc = test_and_set_bit_lock(IDE_HOST_BUSY, &host->host_busy);
+ if (rc == 0) {
+ /* for atari only */
+ ide_get_lock(ide_intr, hwif);
+ }
+ }
+ return rc;
+}
+
+static inline void ide_unlock_host(struct ide_host *host)
+{
+ if (host->host_flags & IDE_HFLAG_SERIALIZE) {
+ /* for atari only */
+ ide_release_lock();
+ clear_bit_unlock(IDE_HOST_BUSY, &host->host_busy);
+ }
+}
+
/*
- * Issue a new request to a drive from hwgroup
- *
- * A hwgroup is a serialized group of IDE interfaces. Usually there is
- * exactly one hwif (interface) per hwgroup, but buggy controllers (eg. CMD640)
- * may have both interfaces in a single hwgroup to "serialize" access.
- * Or possibly multiple ISA interfaces can share a common IRQ by being grouped
- * together into one hwgroup for serialized access.
- *
- * Note also that several hwgroups can end up sharing a single IRQ,
- * possibly along with many other devices. This is especially common in
- * PCI-based systems with off-board IDE controller cards.
- *
- * The IDE driver uses a per-hwgroup lock to protect the hwgroup->busy flag.
- *
- * The first thread into the driver for a particular hwgroup sets the
- * hwgroup->busy flag to indicate that this hwgroup is now active,
- * and then initiates processing of the top request from the request queue.
- *
- * Other threads attempting entry notice the busy setting, and will simply
- * queue their new requests and exit immediately. Note that hwgroup->busy
- * remains set even when the driver is merely awaiting the next interrupt.
- * Thus, the meaning is "this hwgroup is busy processing a request".
- *
- * When processing of a request completes, the completing thread or IRQ-handler
- * will start the next request from the queue. If no more work remains,
- * the driver will clear the hwgroup->busy flag and exit.
- *
- * The per-hwgroup spinlock is used to protect all access to the
- * hwgroup->busy flag, but is otherwise not needed for most processing in
- * the driver. This makes the driver much more friendlier to shared IRQs
- * than previous designs, while remaining 100% (?) SMP safe and capable.
+ * Issue a new request to a device.
*/
void do_ide_request(struct request_queue *q)
{
ide_drive_t *drive = q->queuedata;
ide_hwif_t *hwif = drive->hwif;
- ide_hwgroup_t *hwgroup = hwif->hwgroup;
- struct request *rq;
+ struct ide_host *host = hwif->host;
+ struct request *rq = NULL;
ide_startstop_t startstop;
/*
blk_remove_plug(q);
spin_unlock_irq(q->queue_lock);
- spin_lock_irq(&hwgroup->lock);
- if (!ide_lock_hwgroup(hwgroup)) {
+ if (ide_lock_host(host, hwif))
+ goto plug_device_2;
+
+ spin_lock_irq(&hwif->lock);
+
+ if (!ide_lock_port(hwif)) {
ide_hwif_t *prev_port;
repeat:
prev_port = hwif->host->cur_port;
- hwgroup->rq = NULL;
+ hwif->rq = NULL;
if (drive->dev_flags & IDE_DFLAG_SLEEPING) {
if (time_before(drive->sleep, jiffies)) {
- ide_unlock_hwgroup(hwgroup);
+ ide_unlock_port(hwif);
goto plug_device;
}
}
* set nIEN for previous port, drives in the
* quirk_list may not like intr setups/cleanups
*/
- if (prev_port && hwgroup->drive->quirk_list == 0)
+ if (prev_port && prev_port->cur_dev->quirk_list == 0)
prev_port->tp_ops->set_irq(prev_port, 0);
hwif->host->cur_port = hwif;
}
- hwgroup->drive = drive;
+ hwif->cur_dev = drive;
drive->dev_flags &= ~(IDE_DFLAG_SLEEPING | IDE_DFLAG_PARKED);
- spin_unlock_irq(&hwgroup->lock);
+ spin_unlock_irq(&hwif->lock);
spin_lock_irq(q->queue_lock);
/*
* we know that the queue isn't empty, but this can happen
*/
rq = elv_next_request(drive->queue);
spin_unlock_irq(q->queue_lock);
- spin_lock_irq(&hwgroup->lock);
+ spin_lock_irq(&hwif->lock);
if (!rq) {
- ide_unlock_hwgroup(hwgroup);
+ ide_unlock_port(hwif);
goto out;
}
blk_pm_request(rq) == 0 &&
(rq->cmd_flags & REQ_PREEMPT) == 0) {
/* there should be no pending command at this point */
- ide_unlock_hwgroup(hwgroup);
+ ide_unlock_port(hwif);
goto plug_device;
}
- hwgroup->rq = rq;
+ hwif->rq = rq;
- spin_unlock_irq(&hwgroup->lock);
+ spin_unlock_irq(&hwif->lock);
startstop = start_request(drive, rq);
- spin_lock_irq(&hwgroup->lock);
+ spin_lock_irq(&hwif->lock);
if (startstop == ide_stopped)
goto repeat;
} else
goto plug_device;
out:
- spin_unlock_irq(&hwgroup->lock);
+ spin_unlock_irq(&hwif->lock);
+ if (rq == NULL)
+ ide_unlock_host(host);
spin_lock_irq(q->queue_lock);
return;
plug_device:
- spin_unlock_irq(&hwgroup->lock);
+ spin_unlock_irq(&hwif->lock);
+ ide_unlock_host(host);
+plug_device_2:
spin_lock_irq(q->queue_lock);
if (!elv_queue_empty(q))
}
/*
- * un-busy the hwgroup etc, and clear any pending DMA status. we want to
+ * un-busy the port etc, and clear any pending DMA status. we want to
* retry the current request in pio mode instead of risking tossing it
* all away
*/
static ide_startstop_t ide_dma_timeout_retry(ide_drive_t *drive, int error)
{
- ide_hwif_t *hwif = HWIF(drive);
+ ide_hwif_t *hwif = drive->hwif;
struct request *rq;
ide_startstop_t ret = ide_stopped;
ide_dma_off_quietly(drive);
/*
- * un-busy drive etc (hwgroup->busy is cleared on return) and
- * make sure request is sane
+ * un-busy drive etc and make sure request is sane
*/
- rq = HWGROUP(drive)->rq;
+ rq = hwif->rq;
if (!rq)
goto out;
- HWGROUP(drive)->rq = NULL;
+ hwif->rq = NULL;
rq->errors = 0;
/**
* ide_timer_expiry - handle lack of an IDE interrupt
- * @data: timer callback magic (hwgroup)
+ * @data: timer callback magic (hwif)
*
* An IDE command has timed out before the expected drive return
* occurred. At this point we attempt to clean up the current
void ide_timer_expiry (unsigned long data)
{
- ide_hwgroup_t *hwgroup = (ide_hwgroup_t *) data;
+ ide_hwif_t *hwif = (ide_hwif_t *)data;
ide_drive_t *uninitialized_var(drive);
ide_handler_t *handler;
- ide_expiry_t *expiry;
unsigned long flags;
unsigned long wait = -1;
int plug_device = 0;
- spin_lock_irqsave(&hwgroup->lock, flags);
+ spin_lock_irqsave(&hwif->lock, flags);
+
+ handler = hwif->handler;
- if (((handler = hwgroup->handler) == NULL) ||
- (hwgroup->req_gen != hwgroup->req_gen_timer)) {
+ if (handler == NULL || hwif->req_gen != hwif->req_gen_timer) {
/*
* Either a marginal timeout occurred
* (got the interrupt just as timer expired),
* Either way, we don't really want to complain about anything.
*/
} else {
- drive = hwgroup->drive;
- if (!drive) {
- printk(KERN_ERR "ide_timer_expiry: hwgroup->drive was NULL\n");
- hwgroup->handler = NULL;
- } else {
- ide_hwif_t *hwif;
- ide_startstop_t startstop = ide_stopped;
-
- if ((expiry = hwgroup->expiry) != NULL) {
- /* continue */
- if ((wait = expiry(drive)) > 0) {
- /* reset timer */
- hwgroup->timer.expires = jiffies + wait;
- hwgroup->req_gen_timer = hwgroup->req_gen;
- add_timer(&hwgroup->timer);
- spin_unlock_irqrestore(&hwgroup->lock, flags);
- return;
- }
- }
- hwgroup->handler = NULL;
- /*
- * We need to simulate a real interrupt when invoking
- * the handler() function, which means we need to
- * globally mask the specific IRQ:
- */
- spin_unlock(&hwgroup->lock);
- hwif = HWIF(drive);
- /* disable_irq_nosync ?? */
- disable_irq(hwif->irq);
- /* local CPU only,
- * as if we were handling an interrupt */
- local_irq_disable();
- if (hwgroup->polling) {
- startstop = handler(drive);
- } else if (drive_is_ready(drive)) {
- if (drive->waiting_for_dma)
- hwif->dma_ops->dma_lost_irq(drive);
- (void)ide_ack_intr(hwif);
- printk(KERN_WARNING "%s: lost interrupt\n", drive->name);
- startstop = handler(drive);
- } else {
- if (drive->waiting_for_dma) {
- startstop = ide_dma_timeout_retry(drive, wait);
- } else
- startstop =
- ide_error(drive, "irq timeout",
- hwif->tp_ops->read_status(hwif));
- }
- spin_lock_irq(&hwgroup->lock);
- enable_irq(hwif->irq);
- if (startstop == ide_stopped) {
- ide_unlock_hwgroup(hwgroup);
- plug_device = 1;
+ ide_expiry_t *expiry = hwif->expiry;
+ ide_startstop_t startstop = ide_stopped;
+
+ drive = hwif->cur_dev;
+
+ if (expiry) {
+ wait = expiry(drive);
+ if (wait > 0) { /* continue */
+ /* reset timer */
+ hwif->timer.expires = jiffies + wait;
+ hwif->req_gen_timer = hwif->req_gen;
+ add_timer(&hwif->timer);
+ spin_unlock_irqrestore(&hwif->lock, flags);
+ return;
}
}
+ hwif->handler = NULL;
+ /*
+ * We need to simulate a real interrupt when invoking
+ * the handler() function, which means we need to
+ * globally mask the specific IRQ:
+ */
+ spin_unlock(&hwif->lock);
+ /* disable_irq_nosync ?? */
+ disable_irq(hwif->irq);
+ /* local CPU only, as if we were handling an interrupt */
+ local_irq_disable();
+ if (hwif->polling) {
+ startstop = handler(drive);
+ } else if (drive_is_ready(drive)) {
+ if (drive->waiting_for_dma)
+ hwif->dma_ops->dma_lost_irq(drive);
+ (void)ide_ack_intr(hwif);
+ printk(KERN_WARNING "%s: lost interrupt\n",
+ drive->name);
+ startstop = handler(drive);
+ } else {
+ if (drive->waiting_for_dma)
+ startstop = ide_dma_timeout_retry(drive, wait);
+ else
+ startstop = ide_error(drive, "irq timeout",
+ hwif->tp_ops->read_status(hwif));
+ }
+ spin_lock_irq(&hwif->lock);
+ enable_irq(hwif->irq);
+ if (startstop == ide_stopped) {
+ ide_unlock_port(hwif);
+ plug_device = 1;
+ }
}
- spin_unlock_irqrestore(&hwgroup->lock, flags);
+ spin_unlock_irqrestore(&hwif->lock, flags);
- if (plug_device)
+ if (plug_device) {
+ ide_unlock_host(hwif->host);
ide_plug_device(drive);
+ }
}
/**
* before completing the issuance of any new drive command, so we will not
* be accidentally invoked as a result of any valid command completion
* interrupt.
- *
- * Note that we must walk the entire hwgroup here. We know which hwif
- * is doing the current command, but we don't know which hwif burped
- * mysteriously.
*/
static void unexpected_intr(int irq, ide_hwif_t *hwif)
{
- ide_hwgroup_t *hwgroup = hwif->hwgroup;
- u8 stat;
-
- /*
- * handle the unexpected interrupt
- */
- do {
- if (hwif->irq == irq) {
- stat = hwif->tp_ops->read_status(hwif);
-
- if (!OK_STAT(stat, ATA_DRDY, BAD_STAT)) {
- /* Try to not flood the console with msgs */
- static unsigned long last_msgtime, count;
- ++count;
- if (time_after(jiffies, last_msgtime + HZ)) {
- last_msgtime = jiffies;
- printk(KERN_ERR "%s%s: unexpected interrupt, "
- "status=0x%02x, count=%ld\n",
- hwif->name,
- (hwif->next==hwgroup->hwif) ? "" : "(?)", stat, count);
- }
- }
+ u8 stat = hwif->tp_ops->read_status(hwif);
+
+ if (!OK_STAT(stat, ATA_DRDY, BAD_STAT)) {
+ /* Try to not flood the console with msgs */
+ static unsigned long last_msgtime, count;
+ ++count;
+
+ if (time_after(jiffies, last_msgtime + HZ)) {
+ last_msgtime = jiffies;
+ printk(KERN_ERR "%s: unexpected interrupt, "
+ "status=0x%02x, count=%ld\n",
+ hwif->name, stat, count);
}
- } while ((hwif = hwif->next) != hwgroup->hwif);
+ }
}
/**
* ide_intr - default IDE interrupt handler
* @irq: interrupt number
- * @dev_id: hwif group
+ * @dev_id: hwif
* @regs: unused weirdness from the kernel irq layer
*
* This is the default IRQ handler for the IDE layer. You should
* places
*
* hwif is the interface in the group currently performing
- * a command. hwgroup->drive is the drive and hwgroup->handler is
+ * a command. hwif->cur_dev is the drive and hwif->handler is
* the IRQ handler to call. As we issue a command the handlers
* step through multiple states, reassigning the handler to the
* next step in the process. Unlike a smart SCSI controller IDE
*
* The handler eventually returns ide_stopped to indicate the
* request completed. At this point we issue the next request
- * on the hwgroup and the process begins again.
+ * on the port and the process begins again.
*/
-
+
irqreturn_t ide_intr (int irq, void *dev_id)
{
- unsigned long flags;
- ide_hwgroup_t *hwgroup = (ide_hwgroup_t *)dev_id;
- ide_hwif_t *hwif = hwgroup->hwif;
+ ide_hwif_t *hwif = (ide_hwif_t *)dev_id;
ide_drive_t *uninitialized_var(drive);
ide_handler_t *handler;
+ unsigned long flags;
ide_startstop_t startstop;
irqreturn_t irq_ret = IRQ_NONE;
int plug_device = 0;
- if (hwif->host->host_flags & IDE_HFLAG_SERIALIZE)
- hwif = hwif->host->cur_port;
+ if (hwif->host->host_flags & IDE_HFLAG_SERIALIZE) {
+ if (hwif != hwif->host->cur_port)
+ goto out_early;
+ }
- spin_lock_irqsave(&hwgroup->lock, flags);
+ spin_lock_irqsave(&hwif->lock, flags);
if (!ide_ack_intr(hwif))
goto out;
- if ((handler = hwgroup->handler) == NULL || hwgroup->polling) {
+ handler = hwif->handler;
+
+ if (handler == NULL || hwif->polling) {
/*
* Not expecting an interrupt from this drive.
* That means this could be:
goto out;
}
- drive = hwgroup->drive;
- if (!drive) {
- /*
- * This should NEVER happen, and there isn't much
- * we could do about it here.
- *
- * [Note - this can occur if the drive is hot unplugged]
- */
- goto out_handled;
- }
+ drive = hwif->cur_dev;
if (!drive_is_ready(drive))
/*
*/
goto out;
- hwgroup->handler = NULL;
- hwgroup->req_gen++;
- del_timer(&hwgroup->timer);
- spin_unlock(&hwgroup->lock);
+ hwif->handler = NULL;
+ hwif->req_gen++;
+ del_timer(&hwif->timer);
+ spin_unlock(&hwif->lock);
if (hwif->port_ops && hwif->port_ops->clear_irq)
hwif->port_ops->clear_irq(drive);
/* service this interrupt, may set handler for next interrupt */
startstop = handler(drive);
- spin_lock_irq(&hwgroup->lock);
+ spin_lock_irq(&hwif->lock);
/*
* Note that handler() may have set things up for another
* interrupt to occur soon, but it cannot happen until
* won't allow another of the same (on any CPU) until we return.
*/
if (startstop == ide_stopped) {
- if (hwgroup->handler == NULL) { /* paranoia */
- ide_unlock_hwgroup(hwgroup);
- plug_device = 1;
- } else
- printk(KERN_ERR "%s: %s: huh? expected NULL handler "
- "on exit\n", __func__, drive->name);
+ BUG_ON(hwif->handler);
+ ide_unlock_port(hwif);
+ plug_device = 1;
}
-out_handled:
irq_ret = IRQ_HANDLED;
out:
- spin_unlock_irqrestore(&hwgroup->lock, flags);
-
- if (plug_device)
+ spin_unlock_irqrestore(&hwif->lock, flags);
+out_early:
+ if (plug_device) {
+ ide_unlock_host(hwif->host);
ide_plug_device(drive);
+ }
return irq_ret;
}
void ide_do_drive_cmd(ide_drive_t *drive, struct request *rq)
{
- ide_hwgroup_t *hwgroup = drive->hwif->hwgroup;
struct request_queue *q = drive->queue;
unsigned long flags;
- hwgroup->rq = NULL;
+ drive->hwif->rq = NULL;
spin_lock_irqsave(q->queue_lock, flags);
__elv_add_request(q, rq, ELEVATOR_INSERT_FRONT, 0);