printk: add and use LOGLEVEL_<level> defines for KERN_<LEVEL> equivalents

[deliverable/linux.git] / drivers / mmc / host / dw_mmc-exynos.c

diff --git a/drivers/mmc/host/dw_mmc-exynos.c b/drivers/mmc/host/dw_mmc-exynos.c
index 0fbc53ac7eae8fb27f60b12575be4cabbe759c15..509365cb22c6ad0fd0150a87aa9d5edb0d0161e1 100644 (file)
--- a/drivers/mmc/host/dw_mmc-exynos.c
+++ b/drivers/mmc/host/dw_mmc-exynos.c
@@ -25,6 +25,7 @@
 #define NUM_PINS(x)                    (x + 2)
 
 #define SDMMC_CLKSEL                   0x09C
+#define SDMMC_CLKSEL64                 0x0A8
 #define SDMMC_CLKSEL_CCLK_SAMPLE(x)    (((x) & 7) << 0)
 #define SDMMC_CLKSEL_CCLK_DRIVE(x)     (((x) & 7) << 16)
 #define SDMMC_CLKSEL_CCLK_DIVIDER(x)   (((x) & 7) << 24)
@@ -65,6 +66,8 @@ enum dw_mci_exynos_type {
        DW_MCI_TYPE_EXYNOS5250,
        DW_MCI_TYPE_EXYNOS5420,
        DW_MCI_TYPE_EXYNOS5420_SMU,
+       DW_MCI_TYPE_EXYNOS7,
+       DW_MCI_TYPE_EXYNOS7_SMU,
 };
 
 /* Exynos implementation specific driver private data */
@@ -95,6 +98,12 @@ static struct dw_mci_exynos_compatible {
        }, {
                .compatible     = "samsung,exynos5420-dw-mshc-smu",
                .ctrl_type      = DW_MCI_TYPE_EXYNOS5420_SMU,
+       }, {
+               .compatible     = "samsung,exynos7-dw-mshc",
+               .ctrl_type      = DW_MCI_TYPE_EXYNOS7,
+       }, {
+               .compatible     = "samsung,exynos7-dw-mshc-smu",
+               .ctrl_type      = DW_MCI_TYPE_EXYNOS7_SMU,
        },
 };
 
@@ -102,7 +111,8 @@ static int dw_mci_exynos_priv_init(struct dw_mci *host)
 {
        struct dw_mci_exynos_priv_data *priv = host->priv;
 
-       if (priv->ctrl_type == DW_MCI_TYPE_EXYNOS5420_SMU) {
+       if (priv->ctrl_type == DW_MCI_TYPE_EXYNOS5420_SMU ||
+               priv->ctrl_type == DW_MCI_TYPE_EXYNOS7_SMU) {
                mci_writel(host, MPSBEGIN0, 0);
                mci_writel(host, MPSEND0, DWMCI_BLOCK_NUM);
                mci_writel(host, MPSCTRL0, DWMCI_MPSCTRL_SECURE_WRITE_BIT |
@@ -153,11 +163,22 @@ static int dw_mci_exynos_resume(struct device *dev)
 static int dw_mci_exynos_resume_noirq(struct device *dev)
 {
        struct dw_mci *host = dev_get_drvdata(dev);
+       struct dw_mci_exynos_priv_data *priv = host->priv;
        u32 clksel;
 
-       clksel = mci_readl(host, CLKSEL);
-       if (clksel & SDMMC_CLKSEL_WAKEUP_INT)
-               mci_writel(host, CLKSEL, clksel);
+       if (priv->ctrl_type == DW_MCI_TYPE_EXYNOS7 ||
+               priv->ctrl_type == DW_MCI_TYPE_EXYNOS7_SMU)
+               clksel = mci_readl(host, CLKSEL64);
+       else
+               clksel = mci_readl(host, CLKSEL);
+
+       if (clksel & SDMMC_CLKSEL_WAKEUP_INT) {
+               if (priv->ctrl_type == DW_MCI_TYPE_EXYNOS7 ||
+                       priv->ctrl_type == DW_MCI_TYPE_EXYNOS7_SMU)
+                       mci_writel(host, CLKSEL64, clksel);
+               else
+                       mci_writel(host, CLKSEL, clksel);
+       }
 
        return 0;
 }
@@ -169,6 +190,7 @@ static int dw_mci_exynos_resume_noirq(struct device *dev)
 
 static void dw_mci_exynos_prepare_command(struct dw_mci *host, u32 *cmdr)
 {
+       struct dw_mci_exynos_priv_data *priv = host->priv;
        /*
         * Exynos4412 and Exynos5250 extends the use of CMD register with the
         * use of bit 29 (which is reserved on standard MSHC controllers) for
@@ -176,8 +198,14 @@ static void dw_mci_exynos_prepare_command(struct dw_mci *host, u32 *cmdr)
         * HOLD register should be bypassed in case there is no phase shift
         * applied on CMD/DATA that is sent to the card.
         */
-       if (SDMMC_CLKSEL_GET_DRV_WD3(mci_readl(host, CLKSEL)))
-               *cmdr |= SDMMC_CMD_USE_HOLD_REG;
+       if (priv->ctrl_type == DW_MCI_TYPE_EXYNOS7 ||
+               priv->ctrl_type == DW_MCI_TYPE_EXYNOS7_SMU) {
+               if (SDMMC_CLKSEL_GET_DRV_WD3(mci_readl(host, CLKSEL64)))
+                       *cmdr |= SDMMC_CMD_USE_HOLD_REG;
+        } else {
+               if (SDMMC_CLKSEL_GET_DRV_WD3(mci_readl(host, CLKSEL)))
+                       *cmdr |= SDMMC_CMD_USE_HOLD_REG;
+       }
 }
 
 static void dw_mci_exynos_set_ios(struct dw_mci *host, struct mmc_ios *ios)
@@ -188,12 +216,20 @@ static void dw_mci_exynos_set_ios(struct dw_mci *host, struct mmc_ios *ios)
        u8 div = priv->ciu_div + 1;
 
        if (ios->timing == MMC_TIMING_MMC_DDR52) {
-               mci_writel(host, CLKSEL, priv->ddr_timing);
+               if (priv->ctrl_type == DW_MCI_TYPE_EXYNOS7 ||
+                       priv->ctrl_type == DW_MCI_TYPE_EXYNOS7_SMU)
+                       mci_writel(host, CLKSEL64, priv->ddr_timing);
+               else
+                       mci_writel(host, CLKSEL, priv->ddr_timing);
                /* Should be double rate for DDR mode */
                if (ios->bus_width == MMC_BUS_WIDTH_8)
                        wanted <<= 1;
        } else {
-               mci_writel(host, CLKSEL, priv->sdr_timing);
+               if (priv->ctrl_type == DW_MCI_TYPE_EXYNOS7 ||
+                       priv->ctrl_type == DW_MCI_TYPE_EXYNOS7_SMU)
+                       mci_writel(host, CLKSEL64, priv->sdr_timing);
+               else
+                       mci_writel(host, CLKSEL, priv->sdr_timing);
        }
 
        /* Don't care if wanted clock is zero */
@@ -265,26 +301,51 @@ static int dw_mci_exynos_parse_dt(struct dw_mci *host)
 
 static inline u8 dw_mci_exynos_get_clksmpl(struct dw_mci *host)
 {
-       return SDMMC_CLKSEL_CCLK_SAMPLE(mci_readl(host, CLKSEL));
+       struct dw_mci_exynos_priv_data *priv = host->priv;
+
+       if (priv->ctrl_type == DW_MCI_TYPE_EXYNOS7 ||
+               priv->ctrl_type == DW_MCI_TYPE_EXYNOS7_SMU)
+               return SDMMC_CLKSEL_CCLK_SAMPLE(mci_readl(host, CLKSEL64));
+       else
+               return SDMMC_CLKSEL_CCLK_SAMPLE(mci_readl(host, CLKSEL));
 }
 
 static inline void dw_mci_exynos_set_clksmpl(struct dw_mci *host, u8 sample)
 {
        u32 clksel;
-       clksel = mci_readl(host, CLKSEL);
+       struct dw_mci_exynos_priv_data *priv = host->priv;
+
+       if (priv->ctrl_type == DW_MCI_TYPE_EXYNOS7 ||
+               priv->ctrl_type == DW_MCI_TYPE_EXYNOS7_SMU)
+               clksel = mci_readl(host, CLKSEL64);
+       else
+               clksel = mci_readl(host, CLKSEL);
        clksel = (clksel & ~0x7) | SDMMC_CLKSEL_CCLK_SAMPLE(sample);
-       mci_writel(host, CLKSEL, clksel);
+       if (priv->ctrl_type == DW_MCI_TYPE_EXYNOS7 ||
+               priv->ctrl_type == DW_MCI_TYPE_EXYNOS7_SMU)
+               mci_writel(host, CLKSEL64, clksel);
+       else
+               mci_writel(host, CLKSEL, clksel);
 }
 
 static inline u8 dw_mci_exynos_move_next_clksmpl(struct dw_mci *host)
 {
+       struct dw_mci_exynos_priv_data *priv = host->priv;
        u32 clksel;
        u8 sample;
 
-       clksel = mci_readl(host, CLKSEL);
+       if (priv->ctrl_type == DW_MCI_TYPE_EXYNOS7 ||
+               priv->ctrl_type == DW_MCI_TYPE_EXYNOS7_SMU)
+               clksel = mci_readl(host, CLKSEL64);
+       else
+               clksel = mci_readl(host, CLKSEL);
        sample = (clksel + 1) & 0x7;
        clksel = (clksel & ~0x7) | sample;
-       mci_writel(host, CLKSEL, clksel);
+       if (priv->ctrl_type == DW_MCI_TYPE_EXYNOS7 ||
+               priv->ctrl_type == DW_MCI_TYPE_EXYNOS7_SMU)
+               mci_writel(host, CLKSEL64, clksel);
+       else
+               mci_writel(host, CLKSEL, clksel);
        return sample;
 }
 
@@ -411,6 +472,10 @@ static const struct of_device_id dw_mci_exynos_match[] = {
                        .data = &exynos_drv_data, },
        { .compatible = "samsung,exynos5420-dw-mshc-smu",
                        .data = &exynos_drv_data, },
+       { .compatible = "samsung,exynos7-dw-mshc",
+                       .data = &exynos_drv_data, },
+       { .compatible = "samsung,exynos7-dw-mshc-smu",
+                       .data = &exynos_drv_data, },
        {},
 };
 MODULE_DEVICE_TABLE(of, dw_mci_exynos_match);