/***********************misc routines*****************************/
+/**
+ * i40e_vc_disable_vf
+ * @pf: pointer to the pf info
+ * @vf: pointer to the vf info
+ *
+ * Disable the VF through a SW reset
+ **/
+static inline void i40e_vc_disable_vf(struct i40e_pf *pf, struct i40e_vf *vf)
+{
+ struct i40e_hw *hw = &pf->hw;
+ u32 reg;
+
+ reg = rd32(hw, I40E_VPGEN_VFRTRIG(vf->vf_id));
+ reg |= I40E_VPGEN_VFRTRIG_VFSWR_MASK;
+ wr32(hw, I40E_VPGEN_VFRTRIG(vf->vf_id), reg);
+ i40e_flush(hw);
+}
+
/**
* i40e_vc_isvalid_vsi_id
* @vf: pointer to the vf info
tx_ctx.qlen = info->ring_len;
tx_ctx.rdylist = le16_to_cpu(pf->vsi[vsi_idx]->info.qs_handle[0]);
tx_ctx.rdylist_act = 0;
- tx_ctx.head_wb_ena = 1;
- tx_ctx.head_wb_addr = info->dma_ring_addr +
- (info->ring_len * sizeof(struct i40e_tx_desc));
+ tx_ctx.head_wb_ena = info->headwb_enabled;
+ tx_ctx.head_wb_addr = info->dma_headwb_addr;
/* clear the context in the HMC */
ret = i40e_clear_lan_tx_queue_context(hw, pf_queue_id);
rx_ctx.tphhead_ena = 1;
rx_ctx.lrxqthresh = 2;
rx_ctx.crcstrip = 1;
+ rx_ctx.prefena = 1;
/* clear the context in the HMC */
ret = i40e_clear_lan_rx_queue_context(hw, pf_queue_id);
if (ret)
dev_err(&pf->pdev->dev, "Unable to program ucast filters\n");
+ /* Set VF bandwidth if specified */
+ if (vf->tx_rate) {
+ ret = i40e_aq_config_vsi_bw_limit(&pf->hw, vsi->seid,
+ vf->tx_rate / 50, 0, NULL);
+ if (ret)
+ dev_err(&pf->pdev->dev, "Unable to set tx rate, VF %d, error code %d.\n",
+ vf->vf_id, ret);
+ }
+
error_alloc_vsi_res:
return ret;
}
kfree(pf->vf);
pf->vf = NULL;
+ /* This check is for when the driver is unloaded while VFs are
+ * assigned. Setting the number of VFs to 0 through sysfs is caught
+ * before this function ever gets called.
+ */
if (!i40e_vfs_are_assigned(pf)) {
pci_disable_sriov(pf->pdev);
/* Acknowledge VFLR for all VFS. Without this, VFs will fail to
ret = -ENOMEM;
goto err_alloc;
}
+ pf->vf = vfs;
/* apply default profile */
for (i = 0; i < num_alloc_vfs; i++) {
/* assign default capabilities */
set_bit(I40E_VIRTCHNL_VF_CAP_L2, &vfs[i].vf_caps);
+ vfs[i].spoofchk = true;
/* vf resources get allocated during reset */
i40e_reset_vf(&vfs[i], false);
/* enable vf vplan_qtable mappings */
i40e_enable_vf_mappings(&vfs[i]);
}
- pf->vf = vfs;
pf->num_alloc_vfs = num_alloc_vfs;
i40e_enable_pf_switch_lb(pf);
if (num_vfs)
return i40e_pci_sriov_enable(pdev, num_vfs);
- i40e_free_vfs(pf);
+ if (!i40e_vfs_are_assigned(pf)) {
+ i40e_free_vfs(pf);
+ } else {
+ dev_warn(&pdev->dev, "Unable to free VFs because some are assigned to VMs.\n");
+ return -EINVAL;
+ }
return 0;
}
}
/* delete the temporary mac address */
- i40e_del_filter(vsi, vf->default_lan_addr.addr, 0, true, false);
+ i40e_del_filter(vsi, vf->default_lan_addr.addr, vf->port_vlan_id,
+ true, false);
- /* add the new mac address */
- f = i40e_add_filter(vsi, mac, 0, true, false);
- if (!f) {
- dev_err(&pf->pdev->dev,
- "Unable to add VF ucast filter\n");
- ret = -ENOMEM;
- goto error_param;
- }
+ /* Delete all the filters for this VSI - we're going to kill it
+ * anyway.
+ */
+ list_for_each_entry(f, &vsi->mac_filter_list, list)
+ i40e_del_filter(vsi, f->macaddr, f->vlan, true, false);
dev_info(&pf->pdev->dev, "Setting MAC %pM on VF %d\n", mac, vf_id);
/* program mac filter */
goto error_pvid;
}
- if (vsi->info.pvid == 0 && i40e_is_vsi_in_vlan(vsi))
+ if (vsi->info.pvid == 0 && i40e_is_vsi_in_vlan(vsi)) {
dev_err(&pf->pdev->dev,
"VF %d has already configured VLAN filters and the administrator is requesting a port VLAN override.\nPlease unload and reload the VF driver for this change to take effect.\n",
vf_id);
+ /* Administrator Error - knock the VF offline until he does
+ * the right thing by reconfiguring his network correctly
+ * and then reloading the VF driver.
+ */
+ i40e_vc_disable_vf(pf, vf);
+ }
/* Check for condition where there was already a port VLAN ID
* filter set and now it is being deleted by setting it to zero.
+ * Additionally check for the condition where there was a port
+ * VLAN but now there is a new and different port VLAN being set.
* Before deleting all the old VLAN filters we must add new ones
* with -1 (I40E_VLAN_ANY) or otherwise we're left with all our
* MAC addresses deleted.
*/
- if (!(vlan_id || qos) && vsi->info.pvid)
+ if ((!(vlan_id || qos) ||
+ (vlan_id | qos) != le16_to_cpu(vsi->info.pvid)) &&
+ vsi->info.pvid)
ret = i40e_vsi_add_vlan(vsi, I40E_VLAN_ANY);
if (vsi->info.pvid) {
return ret;
}
+#define I40E_BW_CREDIT_DIVISOR 50 /* 50Mbps per BW credit */
+#define I40E_MAX_BW_INACTIVE_ACCUM 4 /* device can accumulate 4 credits max */
/**
* i40e_ndo_set_vf_bw
* @netdev: network interface device structure
*
* configure vf tx rate
**/
-int i40e_ndo_set_vf_bw(struct net_device *netdev, int vf_id, int tx_rate)
+int i40e_ndo_set_vf_bw(struct net_device *netdev, int vf_id, int min_tx_rate,
+ int max_tx_rate)
{
- return -EOPNOTSUPP;
+ struct i40e_netdev_priv *np = netdev_priv(netdev);
+ struct i40e_pf *pf = np->vsi->back;
+ struct i40e_vsi *vsi;
+ struct i40e_vf *vf;
+ int speed = 0;
+ int ret = 0;
+
+ /* validate the request */
+ if (vf_id >= pf->num_alloc_vfs) {
+ dev_err(&pf->pdev->dev, "Invalid VF Identifier %d.\n", vf_id);
+ ret = -EINVAL;
+ goto error;
+ }
+
+ if (min_tx_rate) {
+ dev_err(&pf->pdev->dev, "Invalid min tx rate (%d) (greater than 0) specified for vf %d.\n",
+ min_tx_rate, vf_id);
+ return -EINVAL;
+ }
+
+ vf = &(pf->vf[vf_id]);
+ vsi = pf->vsi[vf->lan_vsi_index];
+ if (!test_bit(I40E_VF_STAT_INIT, &vf->vf_states)) {
+ dev_err(&pf->pdev->dev, "Uninitialized VF %d.\n", vf_id);
+ ret = -EINVAL;
+ goto error;
+ }
+
+ switch (pf->hw.phy.link_info.link_speed) {
+ case I40E_LINK_SPEED_40GB:
+ speed = 40000;
+ break;
+ case I40E_LINK_SPEED_10GB:
+ speed = 10000;
+ break;
+ case I40E_LINK_SPEED_1GB:
+ speed = 1000;
+ break;
+ default:
+ break;
+ }
+
+ if (max_tx_rate > speed) {
+ dev_err(&pf->pdev->dev, "Invalid max tx rate %d specified for vf %d.",
+ max_tx_rate, vf->vf_id);
+ ret = -EINVAL;
+ goto error;
+ }
+
+ if ((max_tx_rate < 50) && (max_tx_rate > 0)) {
+ dev_warn(&pf->pdev->dev, "Setting max Tx rate to minimum usable value of 50Mbps.\n");
+ max_tx_rate = 50;
+ }
+
+ /* Tx rate credits are in values of 50Mbps, 0 is disabled*/
+ ret = i40e_aq_config_vsi_bw_limit(&pf->hw, vsi->seid,
+ max_tx_rate / I40E_BW_CREDIT_DIVISOR,
+ I40E_MAX_BW_INACTIVE_ACCUM, NULL);
+ if (ret) {
+ dev_err(&pf->pdev->dev, "Unable to set max tx rate, error code %d.\n",
+ ret);
+ ret = -EIO;
+ goto error;
+ }
+ vf->tx_rate = max_tx_rate;
+error:
+ return ret;
}
/**
memcpy(&ivi->mac, vf->default_lan_addr.addr, ETH_ALEN);
- ivi->tx_rate = 0;
+ ivi->max_tx_rate = vf->tx_rate;
+ ivi->min_tx_rate = 0;
ivi->vlan = le16_to_cpu(vsi->info.pvid) & I40E_VLAN_MASK;
ivi->qos = (le16_to_cpu(vsi->info.pvid) & I40E_PRIORITY_MASK) >>
I40E_VLAN_PRIORITY_SHIFT;
+ if (vf->link_forced == false)
+ ivi->linkstate = IFLA_VF_LINK_STATE_AUTO;
+ else if (vf->link_up == true)
+ ivi->linkstate = IFLA_VF_LINK_STATE_ENABLE;
+ else
+ ivi->linkstate = IFLA_VF_LINK_STATE_DISABLE;
+ ivi->spoofchk = vf->spoofchk;
ret = 0;
error_param:
error_out:
return ret;
}
+
+/**
+ * i40e_ndo_set_vf_spoofchk
+ * @netdev: network interface device structure
+ * @vf_id: vf identifier
+ * @enable: flag to enable or disable feature
+ *
+ * Enable or disable VF spoof checking
+ **/
+int i40e_ndo_set_vf_spoofck(struct net_device *netdev, int vf_id, bool enable)
+{
+ struct i40e_netdev_priv *np = netdev_priv(netdev);
+ struct i40e_vsi *vsi = np->vsi;
+ struct i40e_pf *pf = vsi->back;
+ struct i40e_vsi_context ctxt;
+ struct i40e_hw *hw = &pf->hw;
+ struct i40e_vf *vf;
+ int ret = 0;
+
+ /* validate the request */
+ if (vf_id >= pf->num_alloc_vfs) {
+ dev_err(&pf->pdev->dev, "Invalid VF Identifier %d\n", vf_id);
+ ret = -EINVAL;
+ goto out;
+ }
+
+ vf = &(pf->vf[vf_id]);
+
+ if (enable == vf->spoofchk)
+ goto out;
+
+ vf->spoofchk = enable;
+ memset(&ctxt, 0, sizeof(ctxt));
+ ctxt.seid = pf->vsi[vf->lan_vsi_index]->seid;
+ ctxt.pf_num = pf->hw.pf_id;
+ ctxt.info.valid_sections = cpu_to_le16(I40E_AQ_VSI_PROP_SECURITY_VALID);
+ if (enable)
+ ctxt.info.sec_flags |= I40E_AQ_VSI_SEC_FLAG_ENABLE_MAC_CHK;
+ ret = i40e_aq_update_vsi_params(hw, &ctxt, NULL);
+ if (ret) {
+ dev_err(&pf->pdev->dev, "Error %d updating VSI parameters\n",
+ ret);
+ ret = -EIO;
+ }
+out:
+ return ret;
+}
projects / deliverable / linux.git / blobdiff