brcmf_sdio_regwb(bus->sdiodev, SBSDIO_FUNC1_CHIPCLKCSR,
clkreq, &err);
if (err) {
- brcmf_dbg(ERROR, "HT Avail request error: %d\n", err);
+ brcmf_err("HT Avail request error: %d\n", err);
return -EBADE;
}
clkctl = brcmf_sdio_regrb(bus->sdiodev,
SBSDIO_FUNC1_CHIPCLKCSR, &err);
if (err) {
- brcmf_dbg(ERROR, "HT Avail read error: %d\n", err);
+ brcmf_err("HT Avail read error: %d\n", err);
return -EBADE;
}
devctl = brcmf_sdio_regrb(bus->sdiodev,
SBSDIO_DEVICE_CTL, &err);
if (err) {
- brcmf_dbg(ERROR, "Devctl error setting CA: %d\n",
+ brcmf_err("Devctl error setting CA: %d\n",
err);
return -EBADE;
}
usleep_range(5000, 10000);
}
if (err) {
- brcmf_dbg(ERROR, "HT Avail request error: %d\n", err);
+ brcmf_err("HT Avail request error: %d\n", err);
return -EBADE;
}
if (!SBSDIO_CLKAV(clkctl, bus->alp_only)) {
- brcmf_dbg(ERROR, "HT Avail timeout (%d): clkctl 0x%02x\n",
+ brcmf_err("HT Avail timeout (%d): clkctl 0x%02x\n",
PMU_MAX_TRANSITION_DLY, clkctl);
return -EBADE;
}
#if defined(DEBUG)
if (!bus->alp_only) {
if (SBSDIO_ALPONLY(clkctl))
- brcmf_dbg(ERROR, "HT Clock should be on\n");
+ brcmf_err("HT Clock should be on\n");
}
#endif /* defined (DEBUG) */
clkreq, &err);
brcmf_dbg(INFO, "CLKCTL: turned OFF\n");
if (err) {
- brcmf_dbg(ERROR, "Failed access turning clock off: %d\n",
+ brcmf_err("Failed access turning clock off: %d\n",
err);
return -EBADE;
}
else if (bus->clkstate == CLK_AVAIL)
brcmf_sdbrcm_htclk(bus, false, false);
else
- brcmf_dbg(ERROR, "request for %d -> %d\n",
+ brcmf_err("request for %d -> %d\n",
bus->clkstate, target);
brcmf_sdbrcm_wd_timer(bus, BRCMF_WD_POLL_MS);
break;
brcmf_dbg(INFO, "Dongle reports NAK handled, expect rtx of %d\n",
bus->rx_seq);
if (!bus->rxskip)
- brcmf_dbg(ERROR, "unexpected NAKHANDLED!\n");
+ brcmf_err("unexpected NAKHANDLED!\n");
bus->rxskip = false;
intstatus |= I_HMB_FRAME_IND;
(hmb_data & HMB_DATA_VERSION_MASK) >>
HMB_DATA_VERSION_SHIFT;
if (bus->sdpcm_ver != SDPCM_PROT_VERSION)
- brcmf_dbg(ERROR, "Version mismatch, dongle reports %d, "
+ brcmf_err("Version mismatch, dongle reports %d, "
"expecting %d\n",
bus->sdpcm_ver, SDPCM_PROT_VERSION);
else
HMB_DATA_FC |
HMB_DATA_FWREADY |
HMB_DATA_FCDATA_MASK | HMB_DATA_VERSION_MASK))
- brcmf_dbg(ERROR, "Unknown mailbox data content: 0x%02x\n",
+ brcmf_err("Unknown mailbox data content: 0x%02x\n",
hmb_data);
return intstatus;
u8 hi, lo;
int err;
- brcmf_dbg(ERROR, "%sterminate frame%s\n",
+ brcmf_err("%sterminate frame%s\n",
abort ? "abort command, " : "",
rtx ? ", send NAK" : "");
break;
if ((hi > (lastrbc >> 8)) && (lo > (lastrbc & 0x00ff))) {
- brcmf_dbg(ERROR, "count growing: last 0x%04x now 0x%04x\n",
+ brcmf_err("count growing: last 0x%04x now 0x%04x\n",
lastrbc, (hi << 8) + lo);
}
lastrbc = (hi << 8) + lo;
}
if (!retries)
- brcmf_dbg(ERROR, "count never zeroed: last 0x%04x\n", lastrbc);
+ brcmf_err("count never zeroed: last 0x%04x\n", lastrbc);
else
brcmf_dbg(INFO, "flush took %d iterations\n", 0xffff - retries);
return -ENODATA;
}
if ((u16)(~(len ^ checksum))) {
- brcmf_dbg(ERROR, "HW header checksum error\n");
+ brcmf_err("HW header checksum error\n");
bus->sdcnt.rx_badhdr++;
brcmf_sdbrcm_rxfail(bus, false, false);
return -EIO;
}
if (len < SDPCM_HDRLEN) {
- brcmf_dbg(ERROR, "HW header length error\n");
+ brcmf_err("HW header length error\n");
return -EPROTO;
}
if (type == BRCMF_SDIO_FT_SUPER &&
(roundup(len, bus->blocksize) != rd->len)) {
- brcmf_dbg(ERROR, "HW superframe header length error\n");
+ brcmf_err("HW superframe header length error\n");
return -EPROTO;
}
if (type == BRCMF_SDIO_FT_SUB && len > rd->len) {
- brcmf_dbg(ERROR, "HW subframe header length error\n");
+ brcmf_err("HW subframe header length error\n");
return -EPROTO;
}
rd->len = len;
*/
if (type == BRCMF_SDIO_FT_SUPER &&
SDPCM_GLOMDESC(&header[SDPCM_FRAMETAG_LEN])) {
- brcmf_dbg(ERROR, "Glom descriptor found in superframe head\n");
+ brcmf_err("Glom descriptor found in superframe head\n");
rd->len = 0;
return -EINVAL;
}
rd->channel = SDPCM_PACKET_CHANNEL(&header[SDPCM_FRAMETAG_LEN]);
if (len > MAX_RX_DATASZ && rd->channel != SDPCM_CONTROL_CHANNEL &&
type != BRCMF_SDIO_FT_SUPER) {
- brcmf_dbg(ERROR, "HW header length too long\n");
+ brcmf_err("HW header length too long\n");
bus->sdiodev->bus_if->dstats.rx_errors++;
bus->sdcnt.rx_toolong++;
brcmf_sdbrcm_rxfail(bus, false, false);
return -EPROTO;
}
if (type == BRCMF_SDIO_FT_SUPER && rd->channel != SDPCM_GLOM_CHANNEL) {
- brcmf_dbg(ERROR, "Wrong channel for superframe\n");
+ brcmf_err("Wrong channel for superframe\n");
rd->len = 0;
return -EINVAL;
}
if (type == BRCMF_SDIO_FT_SUB && rd->channel != SDPCM_DATA_CHANNEL &&
rd->channel != SDPCM_EVENT_CHANNEL) {
- brcmf_dbg(ERROR, "Wrong channel for subframe\n");
+ brcmf_err("Wrong channel for subframe\n");
rd->len = 0;
return -EINVAL;
}
rd->dat_offset = SDPCM_DOFFSET_VALUE(&header[SDPCM_FRAMETAG_LEN]);
if (rd->dat_offset < SDPCM_HDRLEN || rd->dat_offset > rd->len) {
- brcmf_dbg(ERROR, "seq %d: bad data offset\n", rx_seq);
+ brcmf_err("seq %d: bad data offset\n", rx_seq);
bus->sdcnt.rx_badhdr++;
brcmf_sdbrcm_rxfail(bus, false, false);
rd->len = 0;
return -ENXIO;
}
if (rd->seq_num != rx_seq) {
- brcmf_dbg(ERROR, "seq %d: sequence number error, expect %d\n",
+ brcmf_err("seq %d: sequence number error, expect %d\n",
rx_seq, rd->seq_num);
bus->sdcnt.rx_badseq++;
rd->seq_num = rx_seq;
if (rd->len_nxtfrm << 4 > MAX_RX_DATASZ) {
/* only warm for NON glom packet */
if (rd->channel != SDPCM_GLOM_CHANNEL)
- brcmf_dbg(ERROR, "seq %d: next length error\n", rx_seq);
+ brcmf_err("seq %d: next length error\n", rx_seq);
rd->len_nxtfrm = 0;
}
fc = SDPCM_FCMASK_VALUE(&header[SDPCM_FRAMETAG_LEN]);
}
tx_seq_max = SDPCM_WINDOW_VALUE(&header[SDPCM_FRAMETAG_LEN]);
if ((u8)(tx_seq_max - bus->tx_seq) > 0x40) {
- brcmf_dbg(ERROR, "seq %d: max tx seq number error\n", rx_seq);
+ brcmf_err("seq %d: max tx seq number error\n", rx_seq);
tx_seq_max = bus->tx_seq + 2;
}
bus->tx_max = tx_seq_max;
dlen = (u16) (bus->glomd->len);
dptr = bus->glomd->data;
if (!dlen || (dlen & 1)) {
- brcmf_dbg(ERROR, "bad glomd len(%d), ignore descriptor\n",
+ brcmf_err("bad glomd len(%d), ignore descriptor\n",
dlen);
dlen = 0;
}
dptr += sizeof(u16);
if ((sublen < SDPCM_HDRLEN) ||
((num == 0) && (sublen < (2 * SDPCM_HDRLEN)))) {
- brcmf_dbg(ERROR, "descriptor len %d bad: %d\n",
+ brcmf_err("descriptor len %d bad: %d\n",
num, sublen);
pnext = NULL;
break;
}
if (sublen % BRCMF_SDALIGN) {
- brcmf_dbg(ERROR, "sublen %d not multiple of %d\n",
+ brcmf_err("sublen %d not multiple of %d\n",
sublen, BRCMF_SDALIGN);
usechain = false;
}
/* Allocate/chain packet for next subframe */
pnext = brcmu_pkt_buf_get_skb(sublen + BRCMF_SDALIGN);
if (pnext == NULL) {
- brcmf_dbg(ERROR, "bcm_pkt_buf_get_skb failed, num %d len %d\n",
+ brcmf_err("bcm_pkt_buf_get_skb failed, num %d len %d\n",
num, sublen);
break;
}
bus->dataptr, dlen);
sublen = (u16) brcmf_sdbrcm_glom_from_buf(bus, dlen);
if (sublen != dlen) {
- brcmf_dbg(ERROR, "FAILED TO COPY, dlen %d sublen %d\n",
+ brcmf_err("FAILED TO COPY, dlen %d sublen %d\n",
dlen, sublen);
errcode = -1;
}
pnext = NULL;
} else {
- brcmf_dbg(ERROR, "COULDN'T ALLOC %d-BYTE GLOM, FORCE FAILURE\n",
+ brcmf_err("COULDN'T ALLOC %d-BYTE GLOM, FORCE FAILURE\n",
dlen);
errcode = -1;
}
/* On failure, kill the superframe, allow a couple retries */
if (errcode < 0) {
- brcmf_dbg(ERROR, "glom read of %d bytes failed: %d\n",
+ brcmf_err("glom read of %d bytes failed: %d\n",
dlen, errcode);
bus->sdiodev->bus_if->dstats.rx_errors++;
continue;
} else if (brcmf_proto_hdrpull(bus->sdiodev->dev,
&ifidx, pfirst) != 0) {
- brcmf_dbg(ERROR, "rx protocol error\n");
+ brcmf_err("rx protocol error\n");
bus->sdiodev->bus_if->dstats.rx_errors++;
skb_unlink(pfirst, &bus->glom);
brcmu_pkt_buf_free_skb(pfirst);
if (bus->rxblen)
buf = vzalloc(bus->rxblen);
if (!buf) {
- brcmf_dbg(ERROR, "no memory for control frame\n");
+ brcmf_err("no memory for control frame\n");
goto done;
}
rbuf = bus->rxbuf;
/* Drop if the read is too big or it exceeds our maximum */
if ((rdlen + BRCMF_FIRSTREAD) > bus->sdiodev->bus_if->maxctl) {
- brcmf_dbg(ERROR, "%d-byte control read exceeds %d-byte buffer\n",
+ brcmf_err("%d-byte control read exceeds %d-byte buffer\n",
rdlen, bus->sdiodev->bus_if->maxctl);
bus->sdiodev->bus_if->dstats.rx_errors++;
brcmf_sdbrcm_rxfail(bus, false, false);
}
if ((len - doff) > bus->sdiodev->bus_if->maxctl) {
- brcmf_dbg(ERROR, "%d-byte ctl frame (%d-byte ctl data) exceeds %d-byte limit\n",
+ brcmf_err("%d-byte ctl frame (%d-byte ctl data) exceeds %d-byte limit\n",
len, len - doff, bus->sdiodev->bus_if->maxctl);
bus->sdiodev->bus_if->dstats.rx_errors++;
bus->sdcnt.rx_toolong++;
/* Control frame failures need retransmission */
if (sdret < 0) {
- brcmf_dbg(ERROR, "read %d control bytes failed: %d\n",
+ brcmf_err("read %d control bytes failed: %d\n",
rdlen, sdret);
bus->sdcnt.rxc_errors++;
brcmf_sdbrcm_rxfail(bus, true, true);
/* Point to valid data and indicate its length */
spin_lock_bh(&bus->rxctl_lock);
if (bus->rxctl) {
- brcmf_dbg(ERROR, "last control frame is being processed.\n");
+ brcmf_err("last control frame is being processed.\n");
spin_unlock_bh(&bus->rxctl_lock);
vfree(buf);
goto done;
BRCMF_FIRSTREAD);
bus->sdcnt.f2rxhdrs++;
if (sdret < 0) {
- brcmf_dbg(ERROR, "RXHEADER FAILED: %d\n",
+ brcmf_err("RXHEADER FAILED: %d\n",
sdret);
bus->sdcnt.rx_hdrfail++;
brcmf_sdbrcm_rxfail(bus, true, true);
BRCMF_SDALIGN);
if (!pkt) {
/* Give up on data, request rtx of events */
- brcmf_dbg(ERROR, "brcmu_pkt_buf_get_skb failed\n");
+ brcmf_err("brcmu_pkt_buf_get_skb failed\n");
bus->sdiodev->bus_if->dstats.rx_dropped++;
brcmf_sdbrcm_rxfail(bus, false,
RETRYCHAN(rd->channel));
sdio_release_host(bus->sdiodev->func[1]);
if (sdret < 0) {
- brcmf_dbg(ERROR, "read %d bytes from channel %d failed: %d\n",
+ brcmf_err("read %d bytes from channel %d failed: %d\n",
rd->len, rd->channel, sdret);
brcmu_pkt_buf_free_skb(pkt);
bus->sdiodev->bus_if->dstats.rx_errors++;
}
bus->sdcnt.rx_readahead_cnt++;
if (rd->len != roundup(rd_new.len, 16)) {
- brcmf_dbg(ERROR, "frame length mismatch:read %d, should be %d\n",
+ brcmf_err("frame length mismatch:read %d, should be %d\n",
rd->len,
roundup(rd_new.len, 16) >> 4);
rd->len = 0;
"RxHdr:\n");
if (rd_new.channel == SDPCM_CONTROL_CHANNEL) {
- brcmf_dbg(ERROR, "readahead on control packet %d?\n",
+ brcmf_err("readahead on control packet %d?\n",
rd_new.seq_num);
/* Force retry w/normal header read */
rd->len = 0;
skb_pull(pkt, SDPCM_HDRLEN);
bus->glomd = pkt;
} else {
- brcmf_dbg(ERROR, "%s: glom superframe w/o "
+ brcmf_err("%s: glom superframe w/o "
"descriptor!\n", __func__);
sdio_claim_host(bus->sdiodev->func[1]);
brcmf_sdbrcm_rxfail(bus, false, false);
continue;
} else if (brcmf_proto_hdrpull(bus->sdiodev->dev, &ifidx,
pkt) != 0) {
- brcmf_dbg(ERROR, "rx protocol error\n");
+ brcmf_err("rx protocol error\n");
brcmu_pkt_buf_free_skb(pkt);
bus->sdiodev->bus_if->dstats.rx_errors++;
continue;
bus->sdiodev->bus_if->tx_realloc++;
new = brcmu_pkt_buf_get_skb(pkt->len + BRCMF_SDALIGN);
if (!new) {
- brcmf_dbg(ERROR, "couldn't allocate new %d-byte packet\n",
+ brcmf_err("couldn't allocate new %d-byte packet\n",
pkt->len + BRCMF_SDALIGN);
ret = -ENOMEM;
goto done;
(saveclk | SBSDIO_FORCE_HT), &err);
}
if (err)
- brcmf_dbg(ERROR, "Failed to force clock for F2: err %d\n", err);
+ brcmf_err("Failed to force clock for F2: err %d\n", err);
/* Turn off the bus (F2), free any pending packets */
brcmf_dbg(INTR, "disable SDIO interrupts\n");
devctl = brcmf_sdio_regrb(bus->sdiodev,
SBSDIO_DEVICE_CTL, &err);
if (err) {
- brcmf_dbg(ERROR, "error reading DEVCTL: %d\n", err);
+ brcmf_err("error reading DEVCTL: %d\n", err);
bus->sdiodev->bus_if->state = BRCMF_BUS_DOWN;
}
#endif /* DEBUG */
clkctl = brcmf_sdio_regrb(bus->sdiodev,
SBSDIO_FUNC1_CHIPCLKCSR, &err);
if (err) {
- brcmf_dbg(ERROR, "error reading CSR: %d\n",
+ brcmf_err("error reading CSR: %d\n",
err);
bus->sdiodev->bus_if->state = BRCMF_BUS_DOWN;
}
devctl = brcmf_sdio_regrb(bus->sdiodev,
SBSDIO_DEVICE_CTL, &err);
if (err) {
- brcmf_dbg(ERROR, "error reading DEVCTL: %d\n",
+ brcmf_err("error reading DEVCTL: %d\n",
err);
bus->sdiodev->bus_if->state = BRCMF_BUS_DOWN;
}
brcmf_sdio_regwb(bus->sdiodev, SBSDIO_DEVICE_CTL,
devctl, &err);
if (err) {
- brcmf_dbg(ERROR, "error writing DEVCTL: %d\n",
+ brcmf_err("error writing DEVCTL: %d\n",
err);
bus->sdiodev->bus_if->state = BRCMF_BUS_DOWN;
}
/* Generally don't ask for these, can get CRC errors... */
if (intstatus & I_WR_OOSYNC) {
- brcmf_dbg(ERROR, "Dongle reports WR_OOSYNC\n");
+ brcmf_err("Dongle reports WR_OOSYNC\n");
intstatus &= ~I_WR_OOSYNC;
}
if (intstatus & I_RD_OOSYNC) {
- brcmf_dbg(ERROR, "Dongle reports RD_OOSYNC\n");
+ brcmf_err("Dongle reports RD_OOSYNC\n");
intstatus &= ~I_RD_OOSYNC;
}
if (intstatus & I_SBINT) {
- brcmf_dbg(ERROR, "Dongle reports SBINT\n");
+ brcmf_err("Dongle reports SBINT\n");
intstatus &= ~I_SBINT;
}
}
if ((bus->sdiodev->bus_if->state == BRCMF_BUS_DOWN) || (err != 0)) {
- brcmf_dbg(ERROR, "failed backplane access over SDIO, halting operation\n");
+ brcmf_err("failed backplane access over SDIO, halting operation\n");
bus->sdiodev->bus_if->state = BRCMF_BUS_DOWN;
atomic_set(&bus->intstatus, 0);
} else if (atomic_read(&bus->intstatus) ||
skb_pull(pkt, SDPCM_HDRLEN);
brcmf_txcomplete(bus->sdiodev->dev, pkt, false);
brcmu_pkt_buf_free_skb(pkt);
- brcmf_dbg(ERROR, "out of bus->txq !!!\n");
+ brcmf_err("out of bus->txq !!!\n");
ret = -ENOSR;
} else {
ret = 0;
/* Set the backplane window to include the start address */
bcmerror = brcmf_sdcard_set_sbaddr_window(bus->sdiodev, address);
if (bcmerror) {
- brcmf_dbg(ERROR, "window change failed\n");
+ brcmf_err("window change failed\n");
goto xfer_done;
}
bcmerror = brcmf_sdcard_rwdata(bus->sdiodev, write,
sdaddr, data, dsize);
if (bcmerror) {
- brcmf_dbg(ERROR, "membytes transfer failed\n");
+ brcmf_err("membytes transfer failed\n");
break;
}
bcmerror = brcmf_sdcard_set_sbaddr_window(bus->sdiodev,
address);
if (bcmerror) {
- brcmf_dbg(ERROR, "window change failed\n");
+ brcmf_err("window change failed\n");
break;
}
sdaddr = 0;
xfer_done:
/* Return the window to backplane enumeration space for core access */
if (brcmf_sdcard_set_sbaddr_window(bus->sdiodev, bus->sdiodev->sbwad))
- brcmf_dbg(ERROR, "FAILED to set window back to 0x%x\n",
+ brcmf_err("FAILED to set window back to 0x%x\n",
bus->sdiodev->sbwad);
sdio_release_host(bus->sdiodev->func[1]);
* NVRAM length at the end of memory should have been overwritten.
*/
if (!brcmf_sdio_valid_shared_address(addr)) {
- brcmf_dbg(ERROR, "invalid sdpcm_shared address 0x%08X\n",
+ brcmf_err("invalid sdpcm_shared address 0x%08X\n",
addr);
return -EINVAL;
}
sh->msgtrace_addr = le32_to_cpu(sh_le.msgtrace_addr);
if ((sh->flags & SDPCM_SHARED_VERSION_MASK) != SDPCM_SHARED_VERSION) {
- brcmf_dbg(ERROR,
- "sdpcm_shared version mismatch: dhd %d dongle %d\n",
+ brcmf_err("sdpcm_shared version mismatch: dhd %d dongle %d\n",
SDPCM_SHARED_VERSION,
sh->flags & SDPCM_SHARED_VERSION_MASK);
return -EPROTO;
if ((sh.flags & SDPCM_SHARED_ASSERT_BUILT) == 0)
brcmf_dbg(INFO, "firmware not built with -assert\n");
else if (sh.flags & SDPCM_SHARED_ASSERT)
- brcmf_dbg(ERROR, "assertion in dongle\n");
+ brcmf_err("assertion in dongle\n");
if (sh.flags & SDPCM_SHARED_TRAP)
- brcmf_dbg(ERROR, "firmware trap in dongle\n");
+ brcmf_err("firmware trap in dongle\n");
return 0;
}
brcmf_dbg(CTL, "resumed on rxctl frame, got %d expected %d\n",
rxlen, msglen);
} else if (timeleft == 0) {
- brcmf_dbg(ERROR, "resumed on timeout\n");
+ brcmf_err("resumed on timeout\n");
brcmf_sdbrcm_checkdied(bus);
} else if (pending) {
brcmf_dbg(CTL, "cancelled\n");
bcmerror = brcmf_sdbrcm_membytes(bus, false, varaddr,
nvram_ularray, bus->varsz);
if (bcmerror) {
- brcmf_dbg(ERROR, "error %d on reading %d nvram bytes at 0x%08x\n",
+ brcmf_err("error %d on reading %d nvram bytes at 0x%08x\n",
bcmerror, bus->varsz, varaddr);
}
/* Compare the org NVRAM with the one read from RAM */
if (memcmp(bus->vars, nvram_ularray, bus->varsz))
- brcmf_dbg(ERROR, "Downloaded NVRAM image is corrupted\n");
+ brcmf_err("Downloaded NVRAM image is corrupted\n");
else
- brcmf_dbg(ERROR, "Download/Upload/Compare of NVRAM ok\n");
+ brcmf_err("Download/Upload/Compare of NVRAM ok\n");
kfree(nvram_ularray);
#endif /* DEBUG */
}
} else {
if (!ci->iscoreup(bus->sdiodev, ci, BCMA_CORE_INTERNAL_MEM)) {
- brcmf_dbg(ERROR, "SOCRAM core is down after reset?\n");
+ brcmf_err("SOCRAM core is down after reset?\n");
bcmerror = -EBADE;
goto fail;
}
bcmerror = brcmf_sdbrcm_write_vars(bus);
if (bcmerror) {
- brcmf_dbg(ERROR, "no vars written to RAM\n");
+ brcmf_err("no vars written to RAM\n");
bcmerror = 0;
}
ret = request_firmware(&bus->firmware, BRCMF_SDIO_FW_NAME,
&bus->sdiodev->func[2]->dev);
if (ret) {
- brcmf_dbg(ERROR, "Fail to request firmware %d\n", ret);
+ brcmf_err("Fail to request firmware %d\n", ret);
return ret;
}
bus->fw_ptr = 0;
brcmf_sdbrcm_get_image((char *)memptr, MEMBLOCK, bus))) {
ret = brcmf_sdbrcm_membytes(bus, true, offset, memptr, len);
if (ret) {
- brcmf_dbg(ERROR, "error %d on writing %d membytes at 0x%08x\n",
+ brcmf_err("error %d on writing %d membytes at 0x%08x\n",
ret, MEMBLOCK, offset);
goto err;
}
ret = request_firmware(&bus->firmware, BRCMF_SDIO_NV_NAME,
&bus->sdiodev->func[2]->dev);
if (ret) {
- brcmf_dbg(ERROR, "Fail to request nvram %d\n", ret);
+ brcmf_err("Fail to request nvram %d\n", ret);
return ret;
}
/* Keep arm in reset */
if (brcmf_sdbrcm_download_state(bus, true)) {
- brcmf_dbg(ERROR, "error placing ARM core in reset\n");
+ brcmf_err("error placing ARM core in reset\n");
goto err;
}
/* External image takes precedence if specified */
if (brcmf_sdbrcm_download_code_file(bus)) {
- brcmf_dbg(ERROR, "dongle image file download failed\n");
+ brcmf_err("dongle image file download failed\n");
goto err;
}
/* External nvram takes precedence if specified */
if (brcmf_sdbrcm_download_nvram(bus))
- brcmf_dbg(ERROR, "dongle nvram file download failed\n");
+ brcmf_err("dongle nvram file download failed\n");
/* Take arm out of reset */
if (brcmf_sdbrcm_download_state(bus, false)) {
- brcmf_dbg(ERROR, "error getting out of ARM core reset\n");
+ brcmf_err("error getting out of ARM core reset\n");
goto err;
}
(saveclk | SBSDIO_FORCE_HT), &err);
}
if (err) {
- brcmf_dbg(ERROR, "Failed to force clock for F2: err %d\n", err);
+ brcmf_err("Failed to force clock for F2: err %d\n", err);
goto exit;
}
if (ret == 0) {
ret = brcmf_sdio_intr_register(bus->sdiodev);
if (ret != 0)
- brcmf_dbg(ERROR, "intr register failed:%d\n", ret);
+ brcmf_err("intr register failed:%d\n", ret);
}
/* If we didn't come up, turn off backplane clock */
brcmf_dbg(TRACE, "Enter\n");
if (!bus) {
- brcmf_dbg(ERROR, "bus is null pointer, exiting\n");
+ brcmf_err("bus is null pointer, exiting\n");
return;
}
if (bus->sdiodev->bus_if->state == BRCMF_BUS_DOWN) {
- brcmf_dbg(ERROR, "bus is down. we have nothing to do\n");
+ brcmf_err("bus is down. we have nothing to do\n");
return;
}
/* Count the interrupt call */
atomic_set(&bus->ipend, 1);
else
if (brcmf_sdio_intr_rstatus(bus)) {
- brcmf_dbg(ERROR, "failed backplane access\n");
+ brcmf_err("failed backplane access\n");
bus->sdiodev->bus_if->state = BRCMF_BUS_DOWN;
}
/* Disable additional interrupts (is this needed now)? */
if (!bus->intr)
- brcmf_dbg(ERROR, "isr w/o interrupt configured!\n");
+ brcmf_err("isr w/o interrupt configured!\n");
brcmf_sdbrcm_adddpctsk(bus);
queue_work(bus->brcmf_wq, &bus->datawork);
SBSDIO_FUNC1_CHIPCLKCSR, &err);
if (err || ((clkctl & ~SBSDIO_AVBITS) != BRCMF_INIT_CLKCTL1)) {
- brcmf_dbg(ERROR, "ChipClkCSR access: err %d wrote 0x%02x read 0x%02x\n",
+ brcmf_err("ChipClkCSR access: err %d wrote 0x%02x read 0x%02x\n",
err, BRCMF_INIT_CLKCTL1, clkctl);
goto fail;
}
if (brcmf_sdio_chip_attach(bus->sdiodev, &bus->ci, regsva)) {
- brcmf_dbg(ERROR, "brcmf_sdio_chip_attach failed!\n");
+ brcmf_err("brcmf_sdio_chip_attach failed!\n");
goto fail;
}
if (!brcmf_sdbrcm_chipmatch((u16) bus->ci->chip)) {
- brcmf_dbg(ERROR, "unsupported chip: 0x%04x\n", bus->ci->chip);
+ brcmf_err("unsupported chip: 0x%04x\n", bus->ci->chip);
goto fail;
}
/* Get info on the SOCRAM cores... */
bus->ramsize = bus->ci->ramsize;
if (!(bus->ramsize)) {
- brcmf_dbg(ERROR, "failed to find SOCRAM memory!\n");
+ brcmf_err("failed to find SOCRAM memory!\n");
goto fail;
}
INIT_WORK(&bus->datawork, brcmf_sdio_dataworker);
bus->brcmf_wq = create_singlethread_workqueue("brcmf_wq");
if (bus->brcmf_wq == NULL) {
- brcmf_dbg(ERROR, "insufficient memory to create txworkqueue\n");
+ brcmf_err("insufficient memory to create txworkqueue\n");
goto fail;
}
/* attempt to attach to the dongle */
if (!(brcmf_sdbrcm_probe_attach(bus, regsva))) {
- brcmf_dbg(ERROR, "brcmf_sdbrcm_probe_attach failed\n");
+ brcmf_err("brcmf_sdbrcm_probe_attach failed\n");
goto fail;
}
/* Attach to the brcmf/OS/network interface */
ret = brcmf_attach(SDPCM_RESERVE, bus->sdiodev->dev);
if (ret != 0) {
- brcmf_dbg(ERROR, "brcmf_attach failed\n");
+ brcmf_err("brcmf_attach failed\n");
goto fail;
}
/* Allocate buffers */
if (!(brcmf_sdbrcm_probe_malloc(bus))) {
- brcmf_dbg(ERROR, "brcmf_sdbrcm_probe_malloc failed\n");
+ brcmf_err("brcmf_sdbrcm_probe_malloc failed\n");
goto fail;
}
if (!(brcmf_sdbrcm_probe_init(bus))) {
- brcmf_dbg(ERROR, "brcmf_sdbrcm_probe_init failed\n");
+ brcmf_err("brcmf_sdbrcm_probe_init failed\n");
goto fail;
}
/* if firmware path present try to download and bring up bus */
ret = brcmf_bus_start(bus->sdiodev->dev);
if (ret != 0) {
- brcmf_dbg(ERROR, "dongle is not responding\n");
+ brcmf_err("dongle is not responding\n");
goto fail;
}
projects / deliverable / linux.git / blobdiff