#include "iwl-5000-hw.h"
/* Highest firmware API version supported */
-#define IWL1000_UCODE_API_MAX 2
+#define IWL1000_UCODE_API_MAX 3
/* Lowest firmware API version supported */
#define IWL1000_UCODE_API_MIN 1
#define _IWL1000_MODULE_FIRMWARE(api) IWL1000_FW_PRE #api ".ucode"
#define IWL1000_MODULE_FIRMWARE(api) _IWL1000_MODULE_FIRMWARE(api)
+
+/*
+ * For 1000, use advance thermal throttling critical temperature threshold,
+ * but legacy thermal management implementation for now.
+ * This is for the reason of 1000 uCode using advance thermal throttling API
+ * but not implement ct_kill_exit based on ct_kill exit temperature
+ * so the thermal throttling will still based on legacy thermal throttling
+ * management.
+ * The code here need to be modified once 1000 uCode has the advanced thermal
+ * throttling algorithm in place
+ */
+static void iwl1000_set_ct_threshold(struct iwl_priv *priv)
+{
+ /* want Celsius */
+ priv->hw_params.ct_kill_threshold = CT_KILL_THRESHOLD_LEGACY;
+ priv->hw_params.ct_kill_exit_threshold = CT_KILL_EXIT_THRESHOLD;
+}
+
+/* NIC configuration for 1000 series */
+static void iwl1000_nic_config(struct iwl_priv *priv)
+{
+ /* set CSR_HW_CONFIG_REG for uCode use */
+ iwl_set_bit(priv, CSR_HW_IF_CONFIG_REG,
+ CSR_HW_IF_CONFIG_REG_BIT_RADIO_SI |
+ CSR_HW_IF_CONFIG_REG_BIT_MAC_SI);
+
+ /* Setting digital SVR for 1000 card to 1.32V */
+ /* locking is acquired in iwl_set_bits_mask_prph() function */
+ iwl_set_bits_mask_prph(priv, APMG_DIGITAL_SVR_REG,
+ APMG_SVR_DIGITAL_VOLTAGE_1_32,
+ ~APMG_SVR_VOLTAGE_CONFIG_BIT_MSK);
+}
+
+static struct iwl_lib_ops iwl1000_lib = {
+ .set_hw_params = iwl5000_hw_set_hw_params,
+ .txq_update_byte_cnt_tbl = iwl5000_txq_update_byte_cnt_tbl,
+ .txq_inval_byte_cnt_tbl = iwl5000_txq_inval_byte_cnt_tbl,
+ .txq_set_sched = iwl5000_txq_set_sched,
+ .txq_agg_enable = iwl5000_txq_agg_enable,
+ .txq_agg_disable = iwl5000_txq_agg_disable,
+ .txq_attach_buf_to_tfd = iwl_hw_txq_attach_buf_to_tfd,
+ .txq_free_tfd = iwl_hw_txq_free_tfd,
+ .txq_init = iwl_hw_tx_queue_init,
+ .rx_handler_setup = iwl5000_rx_handler_setup,
+ .setup_deferred_work = iwl5000_setup_deferred_work,
+ .is_valid_rtc_data_addr = iwl5000_hw_valid_rtc_data_addr,
+ .load_ucode = iwl5000_load_ucode,
+ .dump_nic_event_log = iwl_dump_nic_event_log,
+ .dump_nic_error_log = iwl_dump_nic_error_log,
+ .init_alive_start = iwl5000_init_alive_start,
+ .alive_notify = iwl5000_alive_notify,
+ .send_tx_power = iwl5000_send_tx_power,
+ .update_chain_flags = iwl_update_chain_flags,
+ .apm_ops = {
+ .init = iwl5000_apm_init,
+ .reset = iwl5000_apm_reset,
+ .stop = iwl5000_apm_stop,
+ .config = iwl1000_nic_config,
+ .set_pwr_src = iwl_set_pwr_src,
+ },
+ .eeprom_ops = {
+ .regulatory_bands = {
+ EEPROM_5000_REG_BAND_1_CHANNELS,
+ EEPROM_5000_REG_BAND_2_CHANNELS,
+ EEPROM_5000_REG_BAND_3_CHANNELS,
+ EEPROM_5000_REG_BAND_4_CHANNELS,
+ EEPROM_5000_REG_BAND_5_CHANNELS,
+ EEPROM_5000_REG_BAND_24_HT40_CHANNELS,
+ EEPROM_5000_REG_BAND_52_HT40_CHANNELS
+ },
+ .verify_signature = iwlcore_eeprom_verify_signature,
+ .acquire_semaphore = iwlcore_eeprom_acquire_semaphore,
+ .release_semaphore = iwlcore_eeprom_release_semaphore,
+ .calib_version = iwl5000_eeprom_calib_version,
+ .query_addr = iwl5000_eeprom_query_addr,
+ },
+ .post_associate = iwl_post_associate,
+ .isr = iwl_isr_ict,
+ .config_ap = iwl_config_ap,
+ .temp_ops = {
+ .temperature = iwl5000_temperature,
+ .set_ct_kill = iwl1000_set_ct_threshold,
+ },
+};
+
+static struct iwl_ops iwl1000_ops = {
+ .ucode = &iwl5000_ucode,
+ .lib = &iwl1000_lib,
+ .hcmd = &iwl5000_hcmd,
+ .utils = &iwl5000_hcmd_utils,
+};
+
struct iwl_cfg iwl1000_bgn_cfg = {
.name = "1000 Series BGN",
.fw_name_pre = IWL1000_FW_PRE,
.ucode_api_max = IWL1000_UCODE_API_MAX,
.ucode_api_min = IWL1000_UCODE_API_MIN,
.sku = IWL_SKU_G|IWL_SKU_N,
- .ops = &iwl5000_ops,
- .eeprom_size = IWL_5000_EEPROM_IMG_SIZE,
+ .ops = &iwl1000_ops,
+ .eeprom_size = OTP_LOW_IMAGE_SIZE,
.eeprom_ver = EEPROM_5000_EEPROM_VERSION,
.eeprom_calib_ver = EEPROM_5000_TX_POWER_VERSION,
.mod_params = &iwl50_mod_params,
.valid_tx_ant = ANT_A,
.valid_rx_ant = ANT_AB,
.need_pll_cfg = true,
+ .max_ll_items = OTP_MAX_LL_ITEMS_1000,
+ .shadow_ram_support = false,
+ .ht_greenfield_support = true,
};