/* Multi-Station support */
REPLY_ADD_STA = 0x18,
- REPLY_REMOVE_STA = 0x19, /* not used */
+ REPLY_REMOVE_STA = 0x19,
REPLY_REMOVE_ALL_STA = 0x1a, /* not used */
+ REPLY_TXFIFO_FLUSH = 0x1e,
/* Security */
REPLY_WEPKEY = 0x20,
REPLY_TX = 0x1c,
REPLY_RATE_SCALE = 0x47, /* 3945 only */
REPLY_LEDS_CMD = 0x48,
- REPLY_TX_LINK_QUALITY_CMD = 0x4e, /* 4965 only */
+ REPLY_TX_LINK_QUALITY_CMD = 0x4e, /* for 4965 and up */
/* WiMAX coexistence */
COEX_PRIORITY_TABLE_CMD = 0x5a, /* for 5000 series and up */
*
* Entries without timestamps contain only event_id and data.
*
+ *
* 2) error_event_table_ptr indicates base of the error log. This contains
- * information about any uCode error that occurs. For 4965, the format
+ * information about any uCode error that occurs. For agn, the format
* of the error log is:
*
* __le32 valid; (nonzero) valid, (0) log is empty
* __le32 bcon_time; beacon timer
* __le32 tsf_low; network timestamp function timer
* __le32 tsf_hi; network timestamp function timer
+ * __le32 gp1; GP1 timer register
+ * __le32 gp2; GP2 timer register
+ * __le32 gp3; GP3 timer register
+ * __le32 ucode_ver; uCode version
+ * __le32 hw_ver; HW Silicon version
+ * __le32 brd_ver; HW board version
+ * __le32 log_pc; log program counter
+ * __le32 frame_ptr; frame pointer
+ * __le32 stack_ptr; stack pointer
+ * __le32 hcmd; last host command
+ * __le32 isr0; isr status register LMPM_NIC_ISR0: rxtx_flag
+ * __le32 isr1; isr status register LMPM_NIC_ISR1: host_flag
+ * __le32 isr2; isr status register LMPM_NIC_ISR2: enc_flag
+ * __le32 isr3; isr status register LMPM_NIC_ISR3: time_flag
+ * __le32 isr4; isr status register LMPM_NIC_ISR4: wico interrupt
+ * __le32 isr_pref; isr status register LMPM_NIC_PREF_STAT
+ * __le32 wait_event; wait event() caller address
+ * __le32 l2p_control; L2pControlField
+ * __le32 l2p_duration; L2pDurationField
+ * __le32 l2p_mhvalid; L2pMhValidBits
+ * __le32 l2p_addr_match; L2pAddrMatchStat
+ * __le32 lmpm_pmg_sel; indicate which clocks are turned on (LMPM_PMG_SEL)
+ * __le32 u_timestamp; indicate when the date and time of the compilation
+ * __le32 reserved;
*
* The Linux driver can print both logs to the system log when a uCode error
* occurs.
/* Special, dedicated locations within device's station table */
#define IWL_AP_ID 0
-#define IWL_MULTICAST_ID 1
#define IWL_STA_ID 2
#define IWL3945_BROADCAST_ID 24
#define IWL3945_STATION_COUNT 25
#define IWL4965_BROADCAST_ID 31
#define IWL4965_STATION_COUNT 32
-#define IWL5000_BROADCAST_ID 15
-#define IWL5000_STATION_COUNT 16
+#define IWLAGN_BROADCAST_ID 15
+#define IWLAGN_STATION_COUNT 16
#define IWL_STATION_COUNT 32 /* MAX(3945,4965)*/
#define IWL_INVALID_STATION 255
u8 reserved2[2];
} __attribute__ ((packed));
+#define IWL_TX_FIFO_BK_MSK cpu_to_le32(BIT(0))
+#define IWL_TX_FIFO_BE_MSK cpu_to_le32(BIT(1))
+#define IWL_TX_FIFO_VI_MSK cpu_to_le32(BIT(2))
+#define IWL_TX_FIFO_VO_MSK cpu_to_le32(BIT(3))
+#define IWL_AGG_TX_QUEUE_MSK cpu_to_le32(0xffc00)
+
+#define IWL_DROP_SINGLE 0
+#define IWL_DROP_SELECTED 1
+#define IWL_DROP_ALL 2
+
+/*
+ * REPLY_TXFIFO_FLUSH = 0x1e(command and response)
+ *
+ * When using full FIFO flush this command checks the scheduler HW block WR/RD
+ * pointers to check if all the frames were transferred by DMA into the
+ * relevant TX FIFO queue. Only when the DMA is finished and the queue is
+ * empty the command can finish.
+ * This command is used to flush the TXFIFO from transmit commands, it may
+ * operate on single or multiple queues, the command queue can't be flushed by
+ * this command. The command response is returned when all the queue flush
+ * operations are done. Each TX command flushed return response with the FLUSH
+ * status set in the TX response status. When FIFO flush operation is used,
+ * the flush operation ends when both the scheduler DMA done and TXFIFO empty
+ * are set.
+ *
+ * @fifo_control: bit mask for which queues to flush
+ * @flush_control: flush controls
+ * 0: Dump single MSDU
+ * 1: Dump multiple MSDU according to PS, INVALID STA, TTL, TID disable.
+ * 2: Dump all FIFO
+ */
+struct iwl_txfifo_flush_cmd {
+ __le32 fifo_control;
+ __le16 flush_control;
+ __le16 reserved;
+} __packed;
+
/*
* REPLY_WEP_KEY = 0x20
*/
__le16 reserved3;
} __attribute__ ((packed));
-struct iwl4965_rx_mpdu_res_start {
+struct iwl_rx_mpdu_res_start {
__le16 byte_count;
__le16 reserved;
} __attribute__ ((packed));
/* REPLY_TX Tx flags field */
-/* 1: Use RTS/CTS protocol or CTS-to-self if spec allows it
+/*
+ * 1: Use RTS/CTS protocol or CTS-to-self if spec allows it
* before this frame. if CTS-to-self required check
- * RXON_FLG_SELF_CTS_EN status. */
-#define TX_CMD_FLG_RTS_CTS_MSK cpu_to_le32(1 << 0)
+ * RXON_FLG_SELF_CTS_EN status.
+ * unused in 3945/4965, used in 5000 series and after
+ */
+#define TX_CMD_FLG_PROT_REQUIRE_MSK cpu_to_le32(1 << 0)
-/* 1: Use Request-To-Send protocol before this frame.
- * Mutually exclusive vs. TX_CMD_FLG_CTS_MSK. */
+/*
+ * 1: Use Request-To-Send protocol before this frame.
+ * Mutually exclusive vs. TX_CMD_FLG_CTS_MSK.
+ * used in 3945/4965, unused in 5000 series and after
+ */
#define TX_CMD_FLG_RTS_MSK cpu_to_le32(1 << 1)
-/* 1: Transmit Clear-To-Send to self before this frame.
+/*
+ * 1: Transmit Clear-To-Send to self before this frame.
* Driver should set this for AUTH/DEAUTH/ASSOC-REQ/REASSOC mgmnt frames.
- * Mutually exclusive vs. TX_CMD_FLG_RTS_MSK. */
+ * Mutually exclusive vs. TX_CMD_FLG_RTS_MSK.
+ * used in 3945/4965, unused in 5000 series and after
+ */
#define TX_CMD_FLG_CTS_MSK cpu_to_le32(1 << 2)
/* 1: Expect ACK from receiving station
* Set when Txing a block-ack request frame. Also set TX_CMD_FLG_ACK_MSK. */
#define TX_CMD_FLG_IMM_BA_RSP_MASK cpu_to_le32(1 << 6)
-/* 1: Frame requires full Tx-Op protection.
- * Set this if either RTS or CTS Tx Flag gets set. */
+/*
+ * 1: Frame requires full Tx-Op protection.
+ * Set this if either RTS or CTS Tx Flag gets set.
+ * used in 3945/4965, unused in 5000 series and after
+ */
#define TX_CMD_FLG_FULL_TXOP_PROT_MSK cpu_to_le32(1 << 7)
/* Tx antenna selection field; used only for 3945, reserved (0) for 4965.
/* 1: Ignore Bluetooth priority for this frame.
* 0: Delay Tx until Bluetooth device is done (normal usage). */
-#define TX_CMD_FLG_BT_DIS_MSK cpu_to_le32(1 << 12)
+#define TX_CMD_FLG_IGNORE_BT cpu_to_le32(1 << 12)
/* 1: uCode overrides sequence control field in MAC header.
* 0: Driver provides sequence control field in MAC header.
struct ieee80211_hdr hdr[0];
} __attribute__ ((packed));
-/* TX command response is sent after *all* transmission attempts.
+/* TX command response is sent after *3945* transmission attempts.
*
* NOTES:
*
* command FIFO has been cleared. The host must then deactivate the TX Abort
* control line. Receiving is still allowed in this case.
*/
+enum {
+ TX_3945_STATUS_SUCCESS = 0x01,
+ TX_3945_STATUS_DIRECT_DONE = 0x02,
+ TX_3945_STATUS_FAIL_SHORT_LIMIT = 0x82,
+ TX_3945_STATUS_FAIL_LONG_LIMIT = 0x83,
+ TX_3945_STATUS_FAIL_FIFO_UNDERRUN = 0x84,
+ TX_3945_STATUS_FAIL_MGMNT_ABORT = 0x85,
+ TX_3945_STATUS_FAIL_NEXT_FRAG = 0x86,
+ TX_3945_STATUS_FAIL_LIFE_EXPIRE = 0x87,
+ TX_3945_STATUS_FAIL_DEST_PS = 0x88,
+ TX_3945_STATUS_FAIL_ABORTED = 0x89,
+ TX_3945_STATUS_FAIL_BT_RETRY = 0x8a,
+ TX_3945_STATUS_FAIL_STA_INVALID = 0x8b,
+ TX_3945_STATUS_FAIL_FRAG_DROPPED = 0x8c,
+ TX_3945_STATUS_FAIL_TID_DISABLE = 0x8d,
+ TX_3945_STATUS_FAIL_FRAME_FLUSHED = 0x8e,
+ TX_3945_STATUS_FAIL_INSUFFICIENT_CF_POLL = 0x8f,
+ TX_3945_STATUS_FAIL_TX_LOCKED = 0x90,
+ TX_3945_STATUS_FAIL_NO_BEACON_ON_RADAR = 0x91,
+};
+
+/*
+ * TX command response is sent after *agn* transmission attempts.
+ *
+ * both postpone and abort status are expected behavior from uCode. there is
+ * no special operation required from driver; except for RFKILL_FLUSH,
+ * which required tx flush host command to flush all the tx frames in queues
+ */
enum {
TX_STATUS_SUCCESS = 0x01,
TX_STATUS_DIRECT_DONE = 0x02,
+ /* postpone TX */
+ TX_STATUS_POSTPONE_DELAY = 0x40,
+ TX_STATUS_POSTPONE_FEW_BYTES = 0x41,
+ TX_STATUS_POSTPONE_BT_PRIO = 0x42,
+ TX_STATUS_POSTPONE_QUIET_PERIOD = 0x43,
+ TX_STATUS_POSTPONE_CALC_TTAK = 0x44,
+ /* abort TX */
+ TX_STATUS_FAIL_INTERNAL_CROSSED_RETRY = 0x81,
TX_STATUS_FAIL_SHORT_LIMIT = 0x82,
TX_STATUS_FAIL_LONG_LIMIT = 0x83,
TX_STATUS_FAIL_FIFO_UNDERRUN = 0x84,
- TX_STATUS_FAIL_MGMNT_ABORT = 0x85,
- TX_STATUS_FAIL_NEXT_FRAG = 0x86,
+ TX_STATUS_FAIL_DRAIN_FLOW = 0x85,
+ TX_STATUS_FAIL_RFKILL_FLUSH = 0x86,
TX_STATUS_FAIL_LIFE_EXPIRE = 0x87,
TX_STATUS_FAIL_DEST_PS = 0x88,
- TX_STATUS_FAIL_ABORTED = 0x89,
+ TX_STATUS_FAIL_HOST_ABORTED = 0x89,
TX_STATUS_FAIL_BT_RETRY = 0x8a,
TX_STATUS_FAIL_STA_INVALID = 0x8b,
TX_STATUS_FAIL_FRAG_DROPPED = 0x8c,
TX_STATUS_FAIL_TID_DISABLE = 0x8d,
- TX_STATUS_FAIL_FRAME_FLUSHED = 0x8e,
+ TX_STATUS_FAIL_FIFO_FLUSHED = 0x8e,
TX_STATUS_FAIL_INSUFFICIENT_CF_POLL = 0x8f,
- TX_STATUS_FAIL_TX_LOCKED = 0x90,
- TX_STATUS_FAIL_NO_BEACON_ON_RADAR = 0x91,
+ /* uCode drop due to FW drop request */
+ TX_STATUS_FAIL_FW_DROP = 0x90,
+ /*
+ * uCode drop due to station color mismatch
+ * between tx command and station table
+ */
+ TX_STATUS_FAIL_STA_COLOR_MISMATCH_DROP = 0x91,
};
#define TX_PACKET_MODE_REGULAR 0x0000
TX_ABORT_REQUIRED_MSK = 0x80000000, /* bits 31:31 */
};
-static inline u32 iwl_tx_status_to_mac80211(u32 status)
-{
- status &= TX_STATUS_MSK;
-
- switch (status) {
- case TX_STATUS_SUCCESS:
- case TX_STATUS_DIRECT_DONE:
- return IEEE80211_TX_STAT_ACK;
- case TX_STATUS_FAIL_DEST_PS:
- return IEEE80211_TX_STAT_TX_FILTERED;
- default:
- return 0;
- }
-}
-
-static inline bool iwl_is_tx_success(u32 status)
-{
- status &= TX_STATUS_MSK;
- return (status == TX_STATUS_SUCCESS) ||
- (status == TX_STATUS_DIRECT_DONE);
-}
-
-
-
/* *******************************
* TX aggregation status
******************************* */
#define IWL_GOOD_CRC_TH_NEVER cpu_to_le16(0xffff)
#define IWL_MAX_SCAN_SIZE 1024
#define IWL_MAX_CMD_SIZE 4096
-#define IWL_MAX_PROBE_REQUEST 200
/*
* REPLY_SCAN_CMD = 0x80 (command)
struct statistics_dbg {
__le32 burst_check;
__le32 burst_count;
- __le32 reserved[4];
+ __le32 wait_for_silence_timeout_cnt;
+ __le32 reserved[3];
} __attribute__ ((packed));
struct iwl39_statistics_div {
__le32 beacon_energy_c;
} __attribute__ ((packed));
+struct statistics_rx_non_phy_bt {
+ struct statistics_rx_non_phy common;
+ /* additional stats for bt */
+ __le32 num_bt_kills;
+ __le32 reserved[2];
+} __attribute__ ((packed));
+
struct statistics_rx {
struct statistics_rx_phy ofdm;
struct statistics_rx_phy cck;
struct statistics_rx_ht_phy ofdm_ht;
} __attribute__ ((packed));
+struct statistics_rx_bt {
+ struct statistics_rx_phy ofdm;
+ struct statistics_rx_phy cck;
+ struct statistics_rx_non_phy_bt general;
+ struct statistics_rx_ht_phy ofdm_ht;
+} __attribute__ ((packed));
+
/**
* struct statistics_tx_power - current tx power
*
__le32 cts_timeout_collision;
__le32 ack_or_ba_timeout_collision;
struct statistics_tx_non_phy_agg agg;
+ /*
+ * "tx_power" are optional parameters provided by uCode,
+ * 6000 series is the only device provide the information,
+ * Those are reserved fields for all the other devices
+ */
struct statistics_tx_power tx_power;
__le32 reserved1;
} __attribute__ ((packed));
__le32 reserved2;
} __attribute__ ((packed));
-struct statistics_general {
+struct statistics_general_common {
__le32 temperature; /* radio temperature */
__le32 temperature_m; /* for 5000 and up, this is radio voltage */
struct statistics_dbg dbg;
* in order to get out of bad PHY status
*/
__le32 num_of_sos_states;
+} __attribute__ ((packed));
+
+struct statistics_bt_activity {
+ /* Tx statistics */
+ __le32 hi_priority_tx_req_cnt;
+ __le32 hi_priority_tx_denied_cnt;
+ __le32 lo_priority_tx_req_cnt;
+ __le32 lo_priority_tx_denied_cnt;
+ /* Rx statistics */
+ __le32 hi_priority_rx_req_cnt;
+ __le32 hi_priority_rx_denied_cnt;
+ __le32 lo_priority_rx_req_cnt;
+ __le32 lo_priority_rx_denied_cnt;
+} __attribute__ ((packed));
+
+struct statistics_general {
+ struct statistics_general_common common;
+ __le32 reserved2;
+ __le32 reserved3;
+} __attribute__ ((packed));
+
+struct statistics_general_bt {
+ struct statistics_general_common common;
+ struct statistics_bt_activity activity;
__le32 reserved2;
__le32 reserved3;
} __attribute__ ((packed));
struct statistics_general general;
} __attribute__ ((packed));
+struct iwl_bt_notif_statistics {
+ __le32 flag;
+ struct statistics_rx_bt rx;
+ struct statistics_tx tx;
+ struct statistics_general_bt general;
+} __attribute__ ((packed));
/*
* MISSED_BEACONS_NOTIFICATION = 0xa2 (notification only, not a command)
#define HD_AUTO_CORR40_X4_TH_ADD_MIN_INDEX (9)
#define HD_OFDM_ENERGY_TH_IN_INDEX (10)
+/*
+ * Additional table entries in enhance SENSITIVITY_CMD
+ */
+#define HD_INA_NON_SQUARE_DET_OFDM_INDEX (11)
+#define HD_INA_NON_SQUARE_DET_CCK_INDEX (12)
+#define HD_CORR_11_INSTEAD_OF_CORR_9_EN_INDEX (13)
+#define HD_OFDM_NON_SQUARE_DET_SLOPE_MRC_INDEX (14)
+#define HD_OFDM_NON_SQUARE_DET_INTERCEPT_MRC_INDEX (15)
+#define HD_OFDM_NON_SQUARE_DET_SLOPE_INDEX (16)
+#define HD_OFDM_NON_SQUARE_DET_INTERCEPT_INDEX (17)
+#define HD_CCK_NON_SQUARE_DET_SLOPE_MRC_INDEX (18)
+#define HD_CCK_NON_SQUARE_DET_INTERCEPT_MRC_INDEX (19)
+#define HD_CCK_NON_SQUARE_DET_SLOPE_INDEX (20)
+#define HD_CCK_NON_SQUARE_DET_INTERCEPT_INDEX (21)
+#define HD_RESERVED (22)
+
+/* number of entries for enhanced tbl */
+#define ENHANCE_HD_TABLE_SIZE (23)
+
+/* number of additional entries for enhanced tbl */
+#define ENHANCE_HD_TABLE_ENTRIES (ENHANCE_HD_TABLE_SIZE - HD_TABLE_SIZE)
+
+#define HD_INA_NON_SQUARE_DET_OFDM_DATA cpu_to_le16(0)
+#define HD_INA_NON_SQUARE_DET_CCK_DATA cpu_to_le16(0)
+#define HD_CORR_11_INSTEAD_OF_CORR_9_EN_DATA cpu_to_le16(0)
+#define HD_OFDM_NON_SQUARE_DET_SLOPE_MRC_DATA cpu_to_le16(668)
+#define HD_OFDM_NON_SQUARE_DET_INTERCEPT_MRC_DATA cpu_to_le16(4)
+#define HD_OFDM_NON_SQUARE_DET_SLOPE_DATA cpu_to_le16(486)
+#define HD_OFDM_NON_SQUARE_DET_INTERCEPT_DATA cpu_to_le16(37)
+#define HD_CCK_NON_SQUARE_DET_SLOPE_MRC_DATA cpu_to_le16(853)
+#define HD_CCK_NON_SQUARE_DET_INTERCEPT_MRC_DATA cpu_to_le16(4)
+#define HD_CCK_NON_SQUARE_DET_SLOPE_DATA cpu_to_le16(476)
+#define HD_CCK_NON_SQUARE_DET_INTERCEPT_DATA cpu_to_le16(99)
+
+
/* Control field in struct iwl_sensitivity_cmd */
#define SENSITIVITY_CMD_CONTROL_DEFAULT_TABLE cpu_to_le16(0)
#define SENSITIVITY_CMD_CONTROL_WORK_TABLE cpu_to_le16(1)
__le16 table[HD_TABLE_SIZE]; /* use HD_* as index */
} __attribute__ ((packed));
+/*
+ *
+ */
+struct iwl_enhance_sensitivity_cmd {
+ __le16 control; /* always use "1" */
+ __le16 enhance_table[ENHANCE_HD_TABLE_SIZE]; /* use HD_* as index */
+} __packed;
+
/**
* REPLY_PHY_CALIBRATION_CMD = 0xb0 (command, has simple generic response)
projects / deliverable / linux.git / blobdiff