* Major changes to get basic interrupt infrastructure working to
* hopefully be able to support all SuperIO devices. Currently
* works with serial. -- John Marvin <jsm@fc.hp.com>
+ *
+ * Converted superio_init() to be a PCI_FIXUP_FINAL callee.
+ * -- Kyle McMartin <kyle@parisc-linux.org>
*/
#define DBG_INIT(x...)
#endif
+#define SUPERIO "SuperIO"
+#define PFX SUPERIO ": "
+
static irqreturn_t
superio_interrupt(int parent_irq, void *devp, struct pt_regs *regs)
{
local_irq = results & 0x0f;
if (local_irq == 2 || local_irq > 7) {
- printk(KERN_ERR "SuperIO: slave interrupted!\n");
+ printk(KERN_ERR PFX "slave interrupted!\n");
return IRQ_HANDLED;
}
outb(OCW3_ISR,IC_PIC1+0);
results = inb(IC_PIC1+0);
if ((results & 0x80) == 0) { /* if ISR7 not set: spurious */
- printk(KERN_WARNING "SuperIO: spurious interrupt!\n");
+ printk(KERN_WARNING PFX "spurious interrupt!\n");
return IRQ_HANDLED;
}
}
}
/* Initialize Super I/O device */
-
-static void __devinit
-superio_init(struct superio_device *sio)
+static void
+superio_init(struct pci_dev *pcidev)
{
+ struct superio_device *sio = &sio_dev;
struct pci_dev *pdev = sio->lio_pdev;
u16 word;
/* ...then properly fixup the USB to point at suckyio PIC */
sio->usb_pdev->irq = superio_fixup_irq(sio->usb_pdev);
- printk (KERN_INFO "SuperIO: Found NS87560 Legacy I/O device at %s (IRQ %i) \n",
- pci_name(pdev),pdev->irq);
+ printk(KERN_INFO PFX "Found NS87560 Legacy I/O device at %s (IRQ %i) \n",
+ pci_name(pdev), pdev->irq);
pci_read_config_dword (pdev, SIO_SP1BAR, &sio->sp1_base);
sio->sp1_base &= ~1;
- printk (KERN_INFO "SuperIO: Serial port 1 at 0x%x\n", sio->sp1_base);
+ printk(KERN_INFO PFX "Serial port 1 at 0x%x\n", sio->sp1_base);
pci_read_config_dword (pdev, SIO_SP2BAR, &sio->sp2_base);
sio->sp2_base &= ~1;
- printk (KERN_INFO "SuperIO: Serial port 2 at 0x%x\n", sio->sp2_base);
+ printk(KERN_INFO PFX "Serial port 2 at 0x%x\n", sio->sp2_base);
pci_read_config_dword (pdev, SIO_PPBAR, &sio->pp_base);
sio->pp_base &= ~1;
- printk (KERN_INFO "SuperIO: Parallel port at 0x%x\n", sio->pp_base);
+ printk(KERN_INFO PFX "Parallel port at 0x%x\n", sio->pp_base);
pci_read_config_dword (pdev, SIO_FDCBAR, &sio->fdc_base);
sio->fdc_base &= ~1;
- printk (KERN_INFO "SuperIO: Floppy controller at 0x%x\n", sio->fdc_base);
+ printk(KERN_INFO PFX "Floppy controller at 0x%x\n", sio->fdc_base);
pci_read_config_dword (pdev, SIO_ACPIBAR, &sio->acpi_base);
sio->acpi_base &= ~1;
- printk (KERN_INFO "SuperIO: ACPI at 0x%x\n", sio->acpi_base);
+ printk(KERN_INFO PFX "ACPI at 0x%x\n", sio->acpi_base);
request_region (IC_PIC1, 0x1f, "pic1");
request_region (IC_PIC2, 0x1f, "pic2");
/* Setup USB power regulation */
outb(1, sio->acpi_base + USB_REG_CR);
if (inb(sio->acpi_base + USB_REG_CR) & 1)
- printk(KERN_INFO "SuperIO: USB regulator enabled\n");
+ printk(KERN_INFO PFX "USB regulator enabled\n");
else
- printk(KERN_ERR "USB regulator not initialized!\n");
+ printk(KERN_ERR PFX "USB regulator not initialized!\n");
if (request_irq(pdev->irq, superio_interrupt, SA_INTERRUPT,
- "SuperIO", (void *)sio)) {
+ SUPERIO, (void *)sio)) {
- printk(KERN_ERR "SuperIO: could not get irq\n");
+ printk(KERN_ERR PFX "could not get irq\n");
BUG();
return;
}
sio->suckyio_irq_enabled = 1;
}
-
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_NS, PCI_DEVICE_ID_NS_87560_LIO, superio_init);
static void superio_disable_irq(unsigned int irq)
{
u8 r8;
if ((irq < 1) || (irq == 2) || (irq > 7)) {
- printk(KERN_ERR "SuperIO: Illegal irq number.\n");
+ printk(KERN_ERR PFX "Illegal irq number.\n");
BUG();
return;
}
u8 r8;
if ((irq < 1) || (irq == 2) || (irq > 7)) {
- printk(KERN_ERR "SuperIO: Illegal irq number (%d).\n", irq);
+ printk(KERN_ERR PFX "Illegal irq number (%d).\n", irq);
BUG();
return;
}
}
static struct hw_interrupt_type superio_interrupt_type = {
- .typename = "SuperIO",
+ .typename = SUPERIO,
.startup = superio_startup_irq,
.shutdown = superio_disable_irq,
.enable = superio_enable_irq,
retval = early_serial_setup(&serial[0]);
if (retval < 0) {
- printk(KERN_WARNING "SuperIO: Register Serial #0 failed.\n");
+ printk(KERN_WARNING PFX "Register Serial #0 failed.\n");
return;
}
retval = early_serial_setup(&serial[1]);
if (retval < 0)
- printk(KERN_WARNING "SuperIO: Register Serial #1 failed.\n");
+ printk(KERN_WARNING PFX "Register Serial #1 failed.\n");
#endif /* CONFIG_SERIAL_8250 */
}
PARPORT_DMA_NONE /* dma */,
NULL /*struct pci_dev* */) )
- printk(KERN_WARNING "SuperIO: Probing parallel port failed.\n");
+ printk(KERN_WARNING PFX "Probing parallel port failed.\n");
#endif /* CONFIG_PARPORT_PC */
}
DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_NS, PCI_DEVICE_ID_NS_87415, superio_fixup_pci);
-static int __devinit superio_probe(struct pci_dev *dev, const struct pci_device_id *id)
+static int __devinit
+superio_probe(struct pci_dev *dev, const struct pci_device_id *id)
{
+ struct superio_device *sio = &sio_dev;
/*
** superio_probe(00:0e.0) ven 0x100b dev 0x2 sv 0x0 sd 0x0 class 0x1018a
dev->subsystem_vendor, dev->subsystem_device,
dev->class);
- superio_init(&sio_dev);
+ if (!sio->suckyio_irq_enabled)
+ BUG(); /* Enabled by PCI_FIXUP_FINAL */
if (dev->device == PCI_DEVICE_ID_NS_87560_LIO) { /* Function 1 */
superio_parport_init();
DBG_INIT("superio_probe: WTF? Fire Extinguisher?\n");
}
- /* Let appropriate other driver claim this device. */
+ /* Let appropriate other driver claim this device. */
return -ENODEV;
}
static struct pci_device_id superio_tbl[] = {
- { PCI_VENDOR_ID_NS, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 },
+ { PCI_DEVICE(PCI_VENDOR_ID_NS, PCI_DEVICE_ID_NS_87560_LIO) },
+ { PCI_DEVICE(PCI_VENDOR_ID_NS, PCI_DEVICE_ID_NS_87560_USB) },
+ { PCI_DEVICE(PCI_VENDOR_ID_NS, PCI_DEVICE_ID_NS_87415) },
{ 0, }
};
static struct pci_driver superio_driver = {
- .name = "SuperIO",
- .id_table = superio_tbl,
- .probe = superio_probe,
+ .name = SUPERIO,
+ .id_table = superio_tbl,
+ .probe = superio_probe,
};
static int __init superio_modinit(void)
pci_unregister_driver(&superio_driver);
}
-
module_init(superio_modinit);
module_exit(superio_exit);
projects / deliverable / linux.git / blobdiff