#ifndef _IOCTL_H_
#define _IOCTL_H_
-typedef struct rdmbuffer
-{
- ULONG Register;
- ULONG Length;
-}__attribute__((packed)) RDM_BUFFER, *PRDM_BUFFER;
-
-
-typedef struct wrmbuffer
-{
- ULONG Register;
- ULONG Length;
- UCHAR Data[4];
-}__attribute__((packed)) WRM_BUFFER, *PWRM_BUFFER;
-
-
-typedef struct ioctlbuffer
-{
+typedef struct rdmbuffer {
+ unsigned long Register;
+ unsigned long Length;
+} __packed RDM_BUFFER, *PRDM_BUFFER;
+
+typedef struct wrmbuffer {
+ unsigned long Register;
+ unsigned long Length;
+ unsigned char Data[4];
+} __packed WRM_BUFFER, *PWRM_BUFFER;
+
+typedef struct ioctlbuffer {
void __user *InputBuffer;
- ULONG InputLength;
+ unsigned long InputLength;
void __user *OutputBuffer;
- ULONG OutputLength;
-}__attribute__((packed)) IOCTL_BUFFER, *PIOCTL_BUFFER;
-
-typedef struct stGPIOInfo
-{
- UINT uiGpioNumber ; /* valid numbers 0-15 */
- UINT uiGpioValue; /* 1 set ; 0 not set */
-}__attribute__((packed))GPIO_INFO,*PGPIO_INFO;
-typedef struct stUserThreadReq
-{
- //0->Inactivate LED thread.
- //1->Activate the LED thread
- UINT ThreadState;
-}__attribute__((packed))USER_THREAD_REQ,*PUSER_THREAD_REQ;
-#define LED_THREAD_ACTIVATION_REQ 1
-
-
-////********** ioctl codes ***********////
-
-#define BCM_IOCTL 'k'
-
-//1.Control code for CONTROL MESSAGES
-
-#define IOCTL_SEND_CONTROL_MESSAGE _IOW(BCM_IOCTL, 0x801,int)
-
-//2.Control code to write a particular value to a particular register
-#define IOCTL_BCM_REGISTER_WRITE _IOW(BCM_IOCTL, 0x802, int) //
+ unsigned long OutputLength;
+} __packed IOCTL_BUFFER, *PIOCTL_BUFFER;
-//3.
-#define IOCTL_BCM_REGISTER_READ _IOR(BCM_IOCTL, 0x803, int) //
+typedef struct stGPIOInfo {
+ unsigned int uiGpioNumber; /* valid numbers 0-15 */
+ unsigned int uiGpioValue; /* 1 set ; 0 not set */
+} __packed GPIO_INFO, *PGPIO_INFO;
-//4.Control code to write x number of bytes to common memory
-//starting from address y
-#define IOCTL_BCM_COMMON_MEMORY_WRITE _IOW(BCM_IOCTL, 0x804, int)//
-
-//5.Control code to write x number of bytes to common memory
-//starting from address y
-#define IOCTL_BCM_COMMON_MEMORY_READ _IOR(BCM_IOCTL, 0x805, int)//
-
-//6.Control code for CONTROL MESSAGES
-#define IOCTL_GET_CONTROL_MESSAGE _IOR(BCM_IOCTL, 0x806, int)//
-
-//7.Control code for FIRMWARE DOWNLOAD
-#define IOCTL_BCM_FIRMWARE_DOWNLOAD _IOW(BCM_IOCTL, 0x807, int)//
-
-#define IOCTL_BCM_SET_SEND_VCID _IOW(BCM_IOCTL, 0x808, int)
-
-//9.Control code for TRANSFER MODE SWITCHING
-#define IOCTL_BCM_SWITCH_TRANSFER_MODE _IOW(BCM_IOCTL, 0x809, int)
-//10.Control code for LINK UP
-#define IOCTL_LINK_REQ _IOW(BCM_IOCTL, 0x80A, int)
-
-//11.Control code for RSSI Level Request
-#define IOCTL_RSSI_LEVEL_REQ _IOW(BCM_IOCTL, 0x80B, int)
-//12.Control code for IDLE MODE CONTROL
-#define IOCTL_IDLE_REQ _IOW(BCM_IOCTL, 0x80C, int)
-//13.Control code for SS/BS info
-#define IOCTL_SS_INFO_REQ _IOW(BCM_IOCTL, 0x80D, int)
+typedef struct stUserThreadReq {
+ /* 0->Inactivate LED thread. */
+ /* 1->Activate the LED thread */
+ unsigned int ThreadState;
+} __packed USER_THREAD_REQ, *PUSER_THREAD_REQ;
+#define LED_THREAD_ACTIVATION_REQ 1
+#define BCM_IOCTL 'k'
+#define IOCTL_SEND_CONTROL_MESSAGE _IOW(BCM_IOCTL, 0x801, int)
+#define IOCTL_BCM_REGISTER_WRITE _IOW(BCM_IOCTL, 0x802, int)
+#define IOCTL_BCM_REGISTER_READ _IOR(BCM_IOCTL, 0x803, int)
+#define IOCTL_BCM_COMMON_MEMORY_WRITE _IOW(BCM_IOCTL, 0x804, int)
+#define IOCTL_BCM_COMMON_MEMORY_READ _IOR(BCM_IOCTL, 0x805, int)
+#define IOCTL_GET_CONTROL_MESSAGE _IOR(BCM_IOCTL, 0x806, int)
+#define IOCTL_BCM_FIRMWARE_DOWNLOAD _IOW(BCM_IOCTL, 0x807, int)
+#define IOCTL_BCM_SET_SEND_VCID _IOW(BCM_IOCTL, 0x808, int)
+#define IOCTL_BCM_SWITCH_TRANSFER_MODE _IOW(BCM_IOCTL, 0x809, int)
+#define IOCTL_LINK_REQ _IOW(BCM_IOCTL, 0x80A, int)
+#define IOCTL_RSSI_LEVEL_REQ _IOW(BCM_IOCTL, 0x80B, int)
+#define IOCTL_IDLE_REQ _IOW(BCM_IOCTL, 0x80C, int)
+#define IOCTL_SS_INFO_REQ _IOW(BCM_IOCTL, 0x80D, int)
#define IOCTL_GET_STATISTICS_POINTER _IOW(BCM_IOCTL, 0x80E, int)
-
-#define IOCTL_CM_REQUEST _IOW(BCM_IOCTL, 0x80F, int)
-
-#define IOCTL_INIT_PARAM_REQ _IOW(BCM_IOCTL, 0x810, int)
-
-#define IOCTL_MAC_ADDR_REQ _IOW(BCM_IOCTL, 0x811, int)
-
-#define IOCTL_MAC_ADDR_RESP _IOWR(BCM_IOCTL, 0x812, int)
-
-#define IOCTL_CLASSIFICATION_RULE _IOW(BCM_IOCTL, 0x813, char)
-
+#define IOCTL_CM_REQUEST _IOW(BCM_IOCTL, 0x80F, int)
+#define IOCTL_INIT_PARAM_REQ _IOW(BCM_IOCTL, 0x810, int)
+#define IOCTL_MAC_ADDR_REQ _IOW(BCM_IOCTL, 0x811, int)
+#define IOCTL_MAC_ADDR_RESP _IOWR(BCM_IOCTL, 0x812, int)
+#define IOCTL_CLASSIFICATION_RULE _IOW(BCM_IOCTL, 0x813, char)
#define IOCTL_CLOSE_NOTIFICATION _IO(BCM_IOCTL, 0x814)
-
-#define IOCTL_LINK_UP _IO(BCM_IOCTL, 0x815)
-
-#define IOCTL_LINK_DOWN _IO(BCM_IOCTL, 0x816, IOCTL_BUFFER)
-
-#define IOCTL_CHIP_RESET _IO(BCM_IOCTL, 0x816)
-
+#define IOCTL_LINK_UP _IO(BCM_IOCTL, 0x815)
+#define IOCTL_LINK_DOWN _IO(BCM_IOCTL, 0x816, IOCTL_BUFFER)
+#define IOCTL_CHIP_RESET _IO(BCM_IOCTL, 0x816)
#define IOCTL_CINR_LEVEL_REQ _IOW(BCM_IOCTL, 0x817, char)
-
-#define IOCTL_WTM_CONTROL_REQ _IOW(BCM_IOCTL, 0x817,char)
-
+#define IOCTL_WTM_CONTROL_REQ _IOW(BCM_IOCTL, 0x817, char)
#define IOCTL_BE_BUCKET_SIZE _IOW(BCM_IOCTL, 0x818, unsigned long)
-
#define IOCTL_RTPS_BUCKET_SIZE _IOW(BCM_IOCTL, 0x819, unsigned long)
-
-#define IOCTL_QOS_THRESHOLD _IOW(BCM_IOCTL, 0x820, unsigned long)
-
-#define IOCTL_DUMP_PACKET_INFO _IO(BCM_IOCTL, 0x821)
-
-#define IOCTL_GET_PACK_INFO _IOR(BCM_IOCTL, 0x823, int)
-
+#define IOCTL_QOS_THRESHOLD _IOW(BCM_IOCTL, 0x820, unsigned long)
+#define IOCTL_DUMP_PACKET_INFO _IO(BCM_IOCTL, 0x821)
+#define IOCTL_GET_PACK_INFO _IOR(BCM_IOCTL, 0x823, int)
#define IOCTL_BCM_GET_DRIVER_VERSION _IOR(BCM_IOCTL, 0x829, int)
-
-#define IOCTL_BCM_GET_CURRENT_STATUS _IOW(BCM_IOCTL, 0x828, int)
-
-#define IOCTL_BCM_GPIO_SET_REQUEST _IOW(BCM_IOCTL, 0x82A, int)
-
-#define IOCTL_BCM_GPIO_STATUS_REQUEST _IOW(BCM_IOCTL, 0x82b, int)
-
-#define IOCTL_BCM_GET_DSX_INDICATION _IOR(BCM_IOCTL, 0x854, int)
-
-#define IOCTL_BCM_BUFFER_DOWNLOAD_START _IOW(BCM_IOCTL, 0x855, int)
-
-#define IOCTL_BCM_BUFFER_DOWNLOAD _IOW(BCM_IOCTL, 0x856, int)
-
-#define IOCTL_BCM_BUFFER_DOWNLOAD_STOP _IOW(BCM_IOCTL, 0x857, int)
-
-#define IOCTL_BCM_REGISTER_WRITE_PRIVATE _IOW(BCM_IOCTL, 0x826, char)
-
+#define IOCTL_BCM_GET_CURRENT_STATUS _IOW(BCM_IOCTL, 0x828, int)
+#define IOCTL_BCM_GPIO_SET_REQUEST _IOW(BCM_IOCTL, 0x82A, int)
+#define IOCTL_BCM_GPIO_STATUS_REQUEST _IOW(BCM_IOCTL, 0x82b, int)
+#define IOCTL_BCM_GET_DSX_INDICATION _IOR(BCM_IOCTL, 0x854, int)
+#define IOCTL_BCM_BUFFER_DOWNLOAD_START _IOW(BCM_IOCTL, 0x855, int)
+#define IOCTL_BCM_BUFFER_DOWNLOAD _IOW(BCM_IOCTL, 0x856, int)
+#define IOCTL_BCM_BUFFER_DOWNLOAD_STOP _IOW(BCM_IOCTL, 0x857, int)
+#define IOCTL_BCM_REGISTER_WRITE_PRIVATE _IOW(BCM_IOCTL, 0x826, char)
#define IOCTL_BCM_REGISTER_READ_PRIVATE _IOW(BCM_IOCTL, 0x827, char)
-
-#define IOCTL_BCM_SET_DEBUG _IOW(BCM_IOCTL, 0x824, IOCTL_BUFFER)
-
-#define IOCTL_BCM_EEPROM_REGISTER_WRITE _IOW(BCM_IOCTL, 0x858, int)
-
-#define IOCTL_BCM_EEPROM_REGISTER_READ _IOR(BCM_IOCTL, 0x859, int)
-
+#define IOCTL_BCM_SET_DEBUG _IOW(BCM_IOCTL, 0x824, IOCTL_BUFFER)
+#define IOCTL_BCM_EEPROM_REGISTER_WRITE _IOW(BCM_IOCTL, 0x858, int)
+#define IOCTL_BCM_EEPROM_REGISTER_READ _IOR(BCM_IOCTL, 0x859, int)
#define IOCTL_BCM_WAKE_UP_DEVICE_FROM_IDLE _IOR(BCM_IOCTL, 0x860, int)
-
-#define IOCTL_BCM_SET_MAC_TRACING _IOW(BCM_IOCTL, 0x82c, int)
-
-#define IOCTL_BCM_GET_HOST_MIBS _IOW(BCM_IOCTL, 0x853, int)
-
-#define IOCTL_BCM_NVM_READ _IOR(BCM_IOCTL, 0x861, int)
-
-#define IOCTL_BCM_NVM_WRITE _IOW(BCM_IOCTL, 0x862, int)
-
-#define IOCTL_BCM_GET_NVM_SIZE _IOR(BCM_IOCTL, 0x863, int)
-
-#define IOCTL_BCM_CAL_INIT _IOR(BCM_IOCTL, 0x864, int)
-
-#define IOCTL_BCM_BULK_WRM _IOW(BCM_IOCTL, 0x90B, int)
-
-#define IOCTL_BCM_FLASH2X_SECTION_READ _IOR(BCM_IOCTL, 0x865, int)
-
+#define IOCTL_BCM_SET_MAC_TRACING _IOW(BCM_IOCTL, 0x82c, int)
+#define IOCTL_BCM_GET_HOST_MIBS _IOW(BCM_IOCTL, 0x853, int)
+#define IOCTL_BCM_NVM_READ _IOR(BCM_IOCTL, 0x861, int)
+#define IOCTL_BCM_NVM_WRITE _IOW(BCM_IOCTL, 0x862, int)
+#define IOCTL_BCM_GET_NVM_SIZE _IOR(BCM_IOCTL, 0x863, int)
+#define IOCTL_BCM_CAL_INIT _IOR(BCM_IOCTL, 0x864, int)
+#define IOCTL_BCM_BULK_WRM _IOW(BCM_IOCTL, 0x90B, int)
+#define IOCTL_BCM_FLASH2X_SECTION_READ _IOR(BCM_IOCTL, 0x865, int)
#define IOCTL_BCM_FLASH2X_SECTION_WRITE _IOW(BCM_IOCTL, 0x866, int)
-
-#define IOCTL_BCM_GET_FLASH2X_SECTION_BITMAP _IOR(BCM_IOCTL,0x867, int)
-
-#define IOCTL_BCM_SET_ACTIVE_SECTION _IOW(BCM_IOCTL,0x868, int)
-
-#define IOCTL_BCM_IDENTIFY_ACTIVE_SECTION _IO(BCM_IOCTL,0x869)
-
-#define IOCTL_BCM_COPY_SECTION _IOW(BCM_IOCTL, 0x870,int)
-
-#define IOCTL_BCM_GET_FLASH_CS_INFO _IOR(BCM_IOCTL, 0x871, int)
-
-#define IOCTL_BCM_SELECT_DSD _IOW(BCM_IOCTL, 0x872, int)
-
-#define IOCTL_BCM_NVM_RAW_READ _IOR(BCM_IOCTL, 0x875, int)
-
-#define IOCTL_BCM_CNTRLMSG_MASK _IOW(BCM_IOCTL, 0x874, int)
-
-#define IOCTL_BCM_GET_DEVICE_DRIVER_INFO _IOR(BCM_IOCTL, 0x877, int)
-
-#define IOCTL_BCM_TIME_SINCE_NET_ENTRY _IOR(BCM_IOCTL, 0x876, int)
-
-#define BCM_LED_THREAD_STATE_CHANGE_REQ _IOW(BCM_IOCTL, 0x878, int)
-
+#define IOCTL_BCM_GET_FLASH2X_SECTION_BITMAP _IOR(BCM_IOCTL, 0x867, int)
+#define IOCTL_BCM_SET_ACTIVE_SECTION _IOW(BCM_IOCTL, 0x868, int)
+#define IOCTL_BCM_IDENTIFY_ACTIVE_SECTION _IO(BCM_IOCTL, 0x869)
+#define IOCTL_BCM_COPY_SECTION _IOW(BCM_IOCTL, 0x870, int)
+#define IOCTL_BCM_GET_FLASH_CS_INFO _IOR(BCM_IOCTL, 0x871, int)
+#define IOCTL_BCM_SELECT_DSD _IOW(BCM_IOCTL, 0x872, int)
+#define IOCTL_BCM_NVM_RAW_READ _IOR(BCM_IOCTL, 0x875, int)
+#define IOCTL_BCM_CNTRLMSG_MASK _IOW(BCM_IOCTL, 0x874, int)
+#define IOCTL_BCM_GET_DEVICE_DRIVER_INFO _IOR(BCM_IOCTL, 0x877, int)
+#define IOCTL_BCM_TIME_SINCE_NET_ENTRY _IOR(BCM_IOCTL, 0x876, int)
+#define BCM_LED_THREAD_STATE_CHANGE_REQ _IOW(BCM_IOCTL, 0x878, int)
#define IOCTL_BCM_GPIO_MULTI_REQUEST _IOW(BCM_IOCTL, 0x82D, IOCTL_BUFFER)
-#define IOCTL_BCM_GPIO_MODE_REQUEST _IOW(BCM_IOCTL, 0x82E, IOCTL_BUFFER)
-
-
-
-typedef enum _BCM_INTERFACE_TYPE
-{
- BCM_MII,
- BCM_CARDBUS,
- BCM_USB,
- BCM_SDIO,
- BCM_PCMCIA
-}BCM_INTERFACE_TYPE;
-
-typedef struct _DEVICE_DRIVER_INFO
-{
- NVM_TYPE u32NVMType;
- UINT MaxRDMBufferSize;
- BCM_INTERFACE_TYPE u32InterfaceType;
- UINT u32DSDStartOffset;
- UINT u32RxAlignmentCorrection;
- UINT u32Reserved[10];
+#define IOCTL_BCM_GPIO_MODE_REQUEST _IOW(BCM_IOCTL, 0x82E, IOCTL_BUFFER)
+
+typedef enum _BCM_INTERFACE_TYPE {
+ BCM_MII,
+ BCM_CARDBUS,
+ BCM_USB,
+ BCM_SDIO,
+ BCM_PCMCIA
+} BCM_INTERFACE_TYPE;
+
+typedef struct _DEVICE_DRIVER_INFO {
+ NVM_TYPE u32NVMType;
+ unsigned int MaxRDMBufferSize;
+ BCM_INTERFACE_TYPE u32InterfaceType;
+ unsigned int u32DSDStartOffset;
+ unsigned int u32RxAlignmentCorrection;
+ unsigned int u32Reserved[10];
} DEVICE_DRIVER_INFO;
-typedef struct _NVM_READWRITE
-{
-
+typedef struct _NVM_READWRITE {
void __user *pBuffer;
-// Data to be written from|read to. Memory should be allocated by the caller.
-
uint32_t uiOffset;
-// offset at which data should be written to or read from.
-
- uint32_t uiNumBytes;
-// No. of bytes to be written or read.
-
- bool bVerify;
-// Applicable only for write. If set verification of written data will be done.
-
-} NVM_READWRITE,*PNVM_READWRITE;
-typedef struct bulkwrmbuffer
-{
- ULONG Register;
- ULONG SwapEndian;
- ULONG Values[1];
+ uint32_t uiNumBytes;
+ bool bVerify;
+} NVM_READWRITE, *PNVM_READWRITE;
-}BULKWRM_BUFFER,*PBULKWRM_BUFFER;
+typedef struct bulkwrmbuffer {
+ unsigned long Register;
+ unsigned long SwapEndian;
+ unsigned long Values[1];
+} BULKWRM_BUFFER, *PBULKWRM_BUFFER;
-/***********Structure used for FlashMap2.x *******************************/
-
-/*
-* These are Sction present inside the Flash.
-* There is sectional RD/WR for flash Map 2.x.
-* hence these section will be used in read/write API.
-*/
-
-typedef enum _FLASH2X_SECTION_VAL
-{
- NO_SECTION_VAL = 0, //no section is chosen when absolute offset is given for RD/WR
+typedef enum _FLASH2X_SECTION_VAL {
+ NO_SECTION_VAL = 0, /* no section is chosen when absolute offset is given for RD/WR */
ISO_IMAGE1,
ISO_IMAGE2,
DSD0,
ISO_IMAGE2_PART2,
ISO_IMAGE2_PART3,
TOTAL_SECTIONS
-}FLASH2X_SECTION_VAL;
+} FLASH2X_SECTION_VAL;
/*
-* Structure used for READ/WRITE Flash Map2.x
-*/
-typedef struct _FLASH2X_READWRITE
-{
+ * Structure used for READ/WRITE Flash Map2.x
+ */
+typedef struct _FLASH2X_READWRITE {
+ FLASH2X_SECTION_VAL Section; /* which section has to be read/written */
+ u32 offset; /* Offset within Section. */
+ u32 numOfBytes; /* NOB from the offset */
+ u32 bVerify;
+ void __user *pDataBuff; /* Buffer for reading/writing */
+} FLASH2X_READWRITE, *PFLASH2X_READWRITE;
- FLASH2X_SECTION_VAL Section; //which section has to be read/written
- B_UINT32 offset; //Offset within Section.
- B_UINT32 numOfBytes; //NOB from the offset
- B_UINT32 bVerify;
- void __user *pDataBuff; //Buffer for reading/writing
-
-}FLASH2X_READWRITE, *PFLASH2X_READWRITE;
/*
-* This structure is used for coping one section to other.
-* there are two ways to copy one section to other.
-* it NOB =0, complete section will be copied on to other.
-* if NOB !=0, only NOB will be copied from the given offset.
-*/
+ * This structure is used for coping one section to other.
+ * there are two ways to copy one section to other.
+ * it NOB =0, complete section will be copied on to other.
+ * if NOB !=0, only NOB will be copied from the given offset.
+ */
-typedef struct _FLASH2X_COPY_SECTION
-{
- //Src Section from which Data has to be copied to DstSection
+typedef struct _FLASH2X_COPY_SECTION {
FLASH2X_SECTION_VAL SrcSection;
-
- //Destination Section from where Data has to be coppied.
FLASH2X_SECTION_VAL DstSection;
-
- //Offset within Section. if NOB =0 it will be ignored and data will be coped from offset 0.
- B_UINT32 offset;
-
- //NOB from the offset. if NOB = 0 complete src section will be copied to Destination section.
- B_UINT32 numOfBytes;
+ u32 offset;
+ u32 numOfBytes;
} FLASH2X_COPY_SECTION, *PFLASH2X_COPY_SECTION;
-
-typedef enum _SECTION_TYPE
-{
+typedef enum _SECTION_TYPE {
ISO = 0,
VSA = 1,
DSD = 2
} SECTION_TYPE, *PSECTION_TYPE;
/*
-* This section provide the complete bitmap of the Flash.
-* using this map lib/APP will isssue read/write command.
- Fields are defined as :
- Bit [0] = section is present //1:present, 0: Not present
-* Bit [1] = section is valid //1: valid, 0: not valid
-* Bit [2] = Section is R/W //0: RW, 1: RO
-* Bit [3] = Section is Active or not 1 means Active, 0->inactive
-* Bit [7...3] = Reserved
-*/
-
-typedef struct _FLASH2X_BITMAP
-{
- UCHAR ISO_IMAGE1;
- UCHAR ISO_IMAGE2;
- UCHAR DSD0;
- UCHAR DSD1;
- UCHAR DSD2;
- UCHAR VSA0;
- UCHAR VSA1;
- UCHAR VSA2;
- UCHAR SCSI;
- UCHAR CONTROL_SECTION;
- //Reserved for future use
- UCHAR Reserved0;
- UCHAR Reserved1;
- UCHAR Reserved2;
-}FLASH2X_BITMAP, *PFLASH2X_BITMAP;
-
-//for net entry time check
-typedef struct _ST_TIME_ELAPSED_
-{
- ULONG64 ul64TimeElapsedSinceNetEntry;
- UINT32 uiReserved[4]; //By chance if required for future proofing
-}ST_TIME_ELAPSED,*PST_TIME_ELAPSED;
+ * This section provide the complete bitmap of the Flash.
+ * using this map lib/APP will isssue read/write command.
+ * Fields are defined as :
+ * Bit [0] = section is present //1:present, 0: Not present
+ * Bit [1] = section is valid //1: valid, 0: not valid
+ * Bit [2] = Section is R/W //0: RW, 1: RO
+ * Bit [3] = Section is Active or not 1 means Active, 0->inactive
+ * Bit [7...3] = Reserved
+ */
+
+typedef struct _FLASH2X_BITMAP {
+ unsigned char ISO_IMAGE1;
+ unsigned char ISO_IMAGE2;
+ unsigned char DSD0;
+ unsigned char DSD1;
+ unsigned char DSD2;
+ unsigned char VSA0;
+ unsigned char VSA1;
+ unsigned char VSA2;
+ unsigned char SCSI;
+ unsigned char CONTROL_SECTION;
+ /* Reserved for future use */
+ unsigned char Reserved0;
+ unsigned char Reserved1;
+ unsigned char Reserved2;
+} FLASH2X_BITMAP, *PFLASH2X_BITMAP;
+
+struct bcm_time_elapsed {
+ unsigned long long ul64TimeElapsedSinceNetEntry;
+ u32 uiReserved[4];
+};
enum {
- WIMAX_IDX=0, /*To access WiMAX chip GPIO's for GPIO_MULTI_INFO or GPIO_MULTI_MODE*/
- HOST_IDX, /*To access Host chip GPIO's for GPIO_MULTI_INFO or GPIO_MULTI_MODE*/
- MAX_IDX
+ WIMAX_IDX = 0, /* To access WiMAX chip GPIO's for GPIO_MULTI_INFO or GPIO_MULTI_MODE */
+ HOST_IDX, /* To access Host chip GPIO's for GPIO_MULTI_INFO or GPIO_MULTI_MODE */
+ MAX_IDX
};
-typedef struct stGPIOMultiInfo
-{
- UINT uiGPIOCommand; /* 1 for set and 0 for get*/
- UINT uiGPIOMask; /* set the correspondig bit to 1 to access GPIO*/
- UINT uiGPIOValue; /* 0 or 1; value to be set when command is 1.*/
-}__attribute__((packed))GPIO_MULTI_INFO , *PGPIO_MULTI_INFO;
-typedef struct stGPIOMultiMode
-{
- UINT uiGPIOMode; /* 1 for OUT mode, 0 for IN mode*/
- UINT uiGPIOMask; /* GPIO mask to set mode*/
-}__attribute__((packed))GPIO_MULTI_MODE, *PGPIO_MULTI_MODE;
+struct bcm_gpio_multi_info {
+ unsigned int uiGPIOCommand; /* 1 for set and 0 for get */
+ unsigned int uiGPIOMask; /* set the correspondig bit to 1 to access GPIO */
+ unsigned int uiGPIOValue; /* 0 or 1; value to be set when command is 1. */
+} __packed;
+struct bcm_gpio_multi_mode {
+ unsigned int uiGPIOMode; /* 1 for OUT mode, 0 for IN mode */
+ unsigned int uiGPIOMask; /* GPIO mask to set mode */
+} __packed;
#endif
projects / deliverable / linux.git / blobdiff