/*
+ * Copyright(c) 2015, 2016 Intel Corporation.
*
* This file is provided under a dual BSD/GPLv2 license. When using or
* redistributing this file, you may do so under either license.
*
* GPL LICENSE SUMMARY
*
- * Copyright(c) 2015 Intel Corporation.
- *
* This program is free software; you can redistribute it and/or modify
* it under the terms of version 2 of the GNU General Public License as
* published by the Free Software Foundation.
*
* BSD LICENSE
*
- * Copyright(c) 2015 Intel Corporation.
- *
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
/* sleep length while waiting for controller */
#define WAIT_SLEEP_US 100 /* must be larger than 5 (see usage) */
-#define COUNT_DELAY_SEC(n) ((n) * (1000000/WAIT_SLEEP_US))
+#define COUNT_DELAY_SEC(n) ((n) * (1000000 / WAIT_SLEEP_US))
/* GPIO pins */
-#define EPROM_WP_N (1ull << 14) /* EPROM write line */
+#define EPROM_WP_N BIT_ULL(14) /* EPROM write line */
/*
- * Use the EP mutex to guard against other callers from within the driver.
- * Also covers usage of eprom_available.
+ * How long to wait for the EPROM to become available, in ms.
+ * The spec 32 Mb EPROM takes around 40s to erase then write.
+ * Double it for safety.
*/
-static DEFINE_MUTEX(eprom_mutex);
-static int eprom_available; /* default: not available */
+#define EPROM_TIMEOUT 80000 /* ms */
/*
* Turn on external enable line that allows writing on the flash.
static void write_enable(struct hfi1_devdata *dd)
{
/* raise signal */
- write_csr(dd, ASIC_GPIO_OUT,
- read_csr(dd, ASIC_GPIO_OUT) | EPROM_WP_N);
+ write_csr(dd, ASIC_GPIO_OUT, read_csr(dd, ASIC_GPIO_OUT) | EPROM_WP_N);
/* raise enable */
- write_csr(dd, ASIC_GPIO_OE,
- read_csr(dd, ASIC_GPIO_OE) | EPROM_WP_N);
+ write_csr(dd, ASIC_GPIO_OE, read_csr(dd, ASIC_GPIO_OE) | EPROM_WP_N);
}
/*
static void write_disable(struct hfi1_devdata *dd)
{
/* lower signal */
- write_csr(dd, ASIC_GPIO_OUT,
- read_csr(dd, ASIC_GPIO_OUT) & ~EPROM_WP_N);
+ write_csr(dd, ASIC_GPIO_OUT, read_csr(dd, ASIC_GPIO_OUT) & ~EPROM_WP_N);
/* lower enable */
- write_csr(dd, ASIC_GPIO_OE,
- read_csr(dd, ASIC_GPIO_OE) & ~EPROM_WP_N);
+ write_csr(dd, ASIC_GPIO_OE, read_csr(dd, ASIC_GPIO_OE) & ~EPROM_WP_N);
}
/*
/* check the end points for the minimum erase */
if ((start & MASK_4KB) || (end & MASK_4KB)) {
dd_dev_err(dd,
- "%s: non-aligned range (0x%x,0x%x) for a 4KB erase\n",
- __func__, start, end);
+ "%s: non-aligned range (0x%x,0x%x) for a 4KB erase\n",
+ __func__, start, end);
return -EINVAL;
}
int i;
write_csr(dd, ASIC_EEP_ADDR_CMD, CMD_READ_DATA(offset));
- for (i = 0; i < EP_PAGE_SIZE/sizeof(u32); i++)
+ for (i = 0; i < EP_PAGE_SIZE / sizeof(u32); i++)
result[i] = (u32)read_csr(dd, ASIC_EEP_DATA);
write_csr(dd, ASIC_EEP_ADDR_CMD, CMD_NOP); /* close open page */
}
static int read_length(struct hfi1_devdata *dd, u32 start, u32 len, u64 addr)
{
u32 offset;
- u32 buffer[EP_PAGE_SIZE/sizeof(u32)];
+ u32 buffer[EP_PAGE_SIZE / sizeof(u32)];
int ret = 0;
/* reject anything not on an EPROM page boundary */
for (offset = 0; offset < len; offset += EP_PAGE_SIZE) {
read_page(dd, start + offset, buffer);
if (copy_to_user((void __user *)(addr + offset),
- buffer, EP_PAGE_SIZE)) {
+ buffer, EP_PAGE_SIZE)) {
ret = -EFAULT;
goto done;
}
write_csr(dd, ASIC_EEP_ADDR_CMD, CMD_WRITE_ENABLE);
write_csr(dd, ASIC_EEP_DATA, data[0]);
write_csr(dd, ASIC_EEP_ADDR_CMD, CMD_PAGE_PROGRAM(offset));
- for (i = 1; i < EP_PAGE_SIZE/sizeof(u32); i++)
+ for (i = 1; i < EP_PAGE_SIZE / sizeof(u32); i++)
write_csr(dd, ASIC_EEP_DATA, data[i]);
/* will close the open page */
return wait_for_not_busy(dd);
static int write_length(struct hfi1_devdata *dd, u32 start, u32 len, u64 addr)
{
u32 offset;
- u32 buffer[EP_PAGE_SIZE/sizeof(u32)];
+ u32 buffer[EP_PAGE_SIZE / sizeof(u32)];
int ret = 0;
/* reject anything not on an EPROM page boundary */
for (offset = 0; offset < len; offset += EP_PAGE_SIZE) {
if (copy_from_user(buffer, (void __user *)(addr + offset),
- EP_PAGE_SIZE)) {
+ EP_PAGE_SIZE)) {
ret = -EFAULT;
goto done;
}
*
* Return 0 on success, -ERRNO on error
*/
-int handle_eprom_command(const struct hfi1_cmd *cmd)
+int handle_eprom_command(struct file *fp, const struct hfi1_cmd *cmd)
{
struct hfi1_devdata *dd;
u32 dev_id;
u32 rlen; /* range length */
u32 rstart; /* range start */
+ int i_minor;
int ret = 0;
/*
- * The EPROM is per-device, so use unit 0 as that will always
- * exist.
+ * Map the device file to device data using the relative minor.
+ * The device file minor number is the unit number + 1. 0 is
+ * the generic device file - reject it.
*/
- dd = hfi1_lookup(0);
+ i_minor = iminor(file_inode(fp)) - HFI1_USER_MINOR_BASE;
+ if (i_minor <= 0)
+ return -EINVAL;
+ dd = hfi1_lookup(i_minor - 1);
if (!dd) {
- pr_err("%s: cannot find unit 0!\n", __func__);
+ pr_err("%s: cannot find unit %d!\n", __func__, i_minor);
return -EINVAL;
}
- /* lock against other callers touching the ASIC block */
- mutex_lock(&eprom_mutex);
-
- /* some platforms do not have an EPROM */
- if (!eprom_available) {
- ret = -ENOSYS;
- goto done_asic;
- }
+ /* some devices do not have an EPROM */
+ if (!dd->eprom_available)
+ return -EOPNOTSUPP;
- /* lock against the other HFI on another OS */
- ret = acquire_hw_mutex(dd);
+ ret = acquire_chip_resource(dd, CR_EPROM, EPROM_TIMEOUT);
if (ret) {
- dd_dev_err(dd,
- "%s: unable to acquire hw mutex, no EPROM support\n",
- __func__);
+ dd_dev_err(dd, "%s: unable to acquire EPROM resource\n",
+ __func__);
goto done_asic;
}
dd_dev_info(dd, "%s: cmd: type %d, len 0x%x, addr 0x%016llx\n",
- __func__, cmd->type, cmd->len, cmd->addr);
+ __func__, cmd->type, cmd->len, cmd->addr);
switch (cmd->type) {
case HFI1_CMD_EP_INFO:
dev_id = read_device_id(dd);
/* addr points to a u32 user buffer */
if (copy_to_user((void __user *)cmd->addr, &dev_id,
- sizeof(u32)))
+ sizeof(u32)))
ret = -EFAULT;
break;
default:
dd_dev_err(dd, "%s: unexpected command %d\n",
- __func__, cmd->type);
+ __func__, cmd->type);
ret = -EINVAL;
break;
}
- release_hw_mutex(dd);
+ release_chip_resource(dd, CR_EPROM);
done_asic:
- mutex_unlock(&eprom_mutex);
return ret;
}
{
int ret = 0;
- /* only the discrete chip has an EPROM, nothing to do */
+ /* only the discrete chip has an EPROM */
if (dd->pcidev->device != PCI_DEVICE_ID_INTEL0)
return 0;
- /* lock against other callers */
- mutex_lock(&eprom_mutex);
- if (eprom_available) /* already initialized */
- goto done_asic;
-
/*
- * Lock against the other HFI on another OS - the mutex above
- * would have caught anything in this driver. It is OK if
- * both OSes reset the EPROM - as long as they don't do it at
- * the same time.
+ * It is OK if both HFIs reset the EPROM as long as they don't
+ * do it at the same time.
*/
- ret = acquire_hw_mutex(dd);
+ ret = acquire_chip_resource(dd, CR_EPROM, EPROM_TIMEOUT);
if (ret) {
dd_dev_err(dd,
- "%s: unable to acquire hw mutex, no EPROM support\n",
- __func__);
+ "%s: unable to acquire EPROM resource, no EPROM support\n",
+ __func__);
goto done_asic;
}
/* reset EPROM to be sure it is in a good state */
/* set reset */
- write_csr(dd, ASIC_EEP_CTL_STAT,
- ASIC_EEP_CTL_STAT_EP_RESET_SMASK);
+ write_csr(dd, ASIC_EEP_CTL_STAT, ASIC_EEP_CTL_STAT_EP_RESET_SMASK);
/* clear reset, set speed */
write_csr(dd, ASIC_EEP_CTL_STAT,
- EP_SPEED_FULL << ASIC_EEP_CTL_STAT_RATE_SPI_SHIFT);
+ EP_SPEED_FULL << ASIC_EEP_CTL_STAT_RATE_SPI_SHIFT);
/* wake the device with command "release powerdown NoID" */
write_csr(dd, ASIC_EEP_ADDR_CMD, CMD_RELEASE_POWERDOWN_NOID);
- eprom_available = 1;
- release_hw_mutex(dd);
+ dd->eprom_available = true;
+ release_chip_resource(dd, CR_EPROM);
done_asic:
- mutex_unlock(&eprom_mutex);
return ret;
}
projects / deliverable / linux.git / blobdiff