#ifndef __MLME_H__
#define __MLME_H__
+#include "rtmp_dot11.h"
+
+
+
// maximum supported capability information -
// ESS, IBSS, Privacy, Short Preamble, Spectrum mgmt, Short Slot
#define SUPPORTED_CAPABILITY_INFO 0x0533
#define JAP_W56 4
#define MAX_RD_REGION 5
-#ifdef NDIS51_MINIPORT
-#define BEACON_LOST_TIME 4000 // 2048 msec = 2 sec
-#else
#define BEACON_LOST_TIME 4 * OS_HZ // 2048 msec = 2 sec
-#endif
#define DLS_TIMEOUT 1200 // unit: msec
#define AUTH_TIMEOUT 300 // unit: msec
#define ASSOC_TIMEOUT 300 // unit: msec
-#define JOIN_TIMEOUT 2 * OS_HZ // unit: msec
+#define JOIN_TIMEOUT 2000 // unit: msec
#define SHORT_CHANNEL_TIME 90 // unit: msec
#define MIN_CHANNEL_TIME 110 // unit: msec, for dual band scan
#define MAX_CHANNEL_TIME 140 // unit: msec, for single band scan
#define FAST_ACTIVE_SCAN_TIME 30 // Active scan waiting for probe response time
#define CW_MIN_IN_BITS 4 // actual CwMin = 2^CW_MIN_IN_BITS - 1
+#define LINK_DOWN_TIMEOUT 20000 // unit: msec
+#define AUTO_WAKEUP_TIMEOUT 70 //unit: msec
+
+
#define CW_MAX_IN_BITS 10 // actual CwMax = 2^CW_MAX_IN_BITS - 1
+
// Note: RSSI_TO_DBM_OFFSET has been changed to variable for new RF (2004-0720).
// SHould not refer to this constant anymore
//#define RSSI_TO_DBM_OFFSET 120 // for RT2530 RSSI-115 = dBm
#define dot11BSSWidthTriggerScanInterval 300 // in sec. max interval between scan operations to be performed to detect BSS channel width trigger events.
#define dot11OBSSScanPassiveTotalPerChannel 200 // in TU. min total amount of time that the STA scans each channel when performing a passive OBSS scan.
#define dot11OBSSScanActiveTotalPerChannel 20 //in TU. min total amount of time that the STA scans each channel when performing a active OBSS scan
-#define dot11BSSWidthChannelTransactionDelayFactor 5 // min ratio between the delay time in performing a switch from 20MHz BSS to 20/40 BSS operation and the maxima
+#define dot11BSSWidthChannelTransactionDelayFactor 5 // min ratio between the delay time in performing a switch from 20MHz BSS to 20/40 BSS operation and the maximum
// interval between overlapping BSS scan operations.
#define dot11BSSScanActivityThreshold 25 // in %%, max total time that a STA may be active on the medium during a period of
// (dot11BSSWidthChannelTransactionDelayFactor * dot11BSSWidthTriggerScanInterval) seconds without
BOOLEAN bHtEnable; // If we should use ht rate.
BOOLEAN bPreNHt; // If we should use ht rate.
//Substract from HT Capability IE
- UCHAR MCSSet[16]; //only supoort MCS=0-15,32 ,
+ UCHAR MCSSet[16];
} RT_HT_PHY_INFO, *PRT_HT_PHY_INFO;
//This structure substracts ralink supports from all 802.11n-related features.
UCHAR NewExtChanOffset;
} NEW_EXT_CHAN_IE, *PNEW_EXT_CHAN_IE;
-
-// 4-byte HTC field. maybe included in any frame except non-QOS data frame. The Order bit must set 1.
-typedef struct PACKED {
- UINT32 MA:1; //management action payload exist in (QoS Null+HTC)
- UINT32 TRQ:1; //sounding request
- UINT32 MRQ:1; //MCS feedback. Request for a MCS feedback
- UINT32 MRSorASI:3; // MRQ Sequence identifier. unchanged during entire procedure. 0x000-0x110.
- UINT32 MFS:3; //SET to the received value of MRS. 0x111 for unsolicited MFB.
- UINT32 MFBorASC:7; //Link adaptation feedback containing recommended MCS. 0x7f for no feedback or not available
- UINT32 CalPos:2; // calibration position
- UINT32 CalSeq:2; //calibration sequence
- UINT32 FBKReq:2; //feedback request
- UINT32 CSISTEERING:2; //CSI/ STEERING
- UINT32 ZLFAnnouce:1; // ZLF announcement
- UINT32 rsv:5; //calibration sequence
- UINT32 ACConstraint:1; //feedback request
- UINT32 RDG:1; //RDG / More PPDU
-} HT_CONTROL, *PHT_CONTROL;
-
-// 2-byte QOS CONTROL field
-typedef struct PACKED {
- USHORT TID:4;
- USHORT EOSP:1;
- USHORT AckPolicy:2; //0: normal ACK 1:No ACK 2:scheduled under MTBA/PSMP 3: BA
- USHORT AMsduPresent:1;
- USHORT Txop_QueueSize:8;
-} QOS_CONTROL, *PQOS_CONTROL;
-
-// 2-byte Frame control field
-typedef struct PACKED {
- USHORT Ver:2; // Protocol version
- USHORT Type:2; // MSDU type
- USHORT SubType:4; // MSDU subtype
- USHORT ToDs:1; // To DS indication
- USHORT FrDs:1; // From DS indication
- USHORT MoreFrag:1; // More fragment bit
- USHORT Retry:1; // Retry status bit
- USHORT PwrMgmt:1; // Power management bit
- USHORT MoreData:1; // More data bit
- USHORT Wep:1; // Wep data
- USHORT Order:1; // Strict order expected
-} FRAME_CONTROL, *PFRAME_CONTROL;
-
-typedef struct PACKED _HEADER_802_11 {
- FRAME_CONTROL FC;
- USHORT Duration;
- UCHAR Addr1[MAC_ADDR_LEN];
- UCHAR Addr2[MAC_ADDR_LEN];
- UCHAR Addr3[MAC_ADDR_LEN];
- USHORT Frag:4;
- USHORT Sequence:12;
- UCHAR Octet[0];
-} HEADER_802_11, *PHEADER_802_11;
-
typedef struct PACKED _FRAME_802_11 {
HEADER_802_11 Hdr;
UCHAR Octet[1];
} EACH_TID, *PEACH_TID;
-typedef struct PACKED _PSPOLL_FRAME {
- FRAME_CONTROL FC;
- USHORT Aid;
- UCHAR Bssid[MAC_ADDR_LEN];
- UCHAR Ta[MAC_ADDR_LEN];
-} PSPOLL_FRAME, *PPSPOLL_FRAME;
-
-typedef struct PACKED _RTS_FRAME {
- FRAME_CONTROL FC;
- USHORT Duration;
- UCHAR Addr1[MAC_ADDR_LEN];
- UCHAR Addr2[MAC_ADDR_LEN];
-}RTS_FRAME, *PRTS_FRAME;
-
// BAREQ AND MTBAREQ have the same subtype BAR, 802.11n BAR use compressed bitmap.
typedef struct PACKED _FRAME_BA_REQ {
FRAME_CONTROL FC;
typedef struct PACKED {
UCHAR Eid;
UCHAR Len;
- CHAR Octet[1];
+ UCHAR Octet[1];
} EID_STRUCT,*PEID_STRUCT, BEACON_EID_STRUCT, *PBEACON_EID_STRUCT;
typedef struct PACKED _RTMP_TX_RATE_SWITCH
projects / deliverable / linux.git / blobdiff