#include <linux/module.h>
#include <linux/kernel.h>
-//#include <linux/config.h>
#include <linux/init.h>
#include <linux/ioport.h>
#include <linux/sched.h>
#include <linux/slab.h>
#include <linux/netdevice.h>
#include <linux/pci.h>
-//#include <linux/usb.h>
#include <linux/etherdevice.h>
#include <linux/delay.h>
#include <linux/rtnetlink.h> //for rtnl_lock()
#include <linux/random.h>
#include <linux/version.h>
#include <asm/io.h>
+#include "ieee80211/rtl819x_HT.h"
#include "ieee80211/ieee80211.h"
#define RTL819xE_MODULE_NAME "rtl819xE"
-//added for HW security, john.0629
+
#define FALSE 0
#define TRUE 1
#define MAX_KEY_LEN 61
#if 0 //we need to use RT_TRACE instead DMESG as RT_TRACE will clearly show debug level wb.
#define DMESG(x,a...) printk(KERN_INFO RTL819xE_MODULE_NAME ": " x "\n", ## a)
-#define DMESGW(x,a...) printk(KERN_WARNING RTL819xE_MODULE_NAME ": WW:" x "\n", ## a)
-#define DMESGE(x,a...) printk(KERN_WARNING RTL819xE_MODULE_NAME ": EE:" x "\n", ## a)
#else
#define DMESG(x,a...)
-#define DMESGW(x,a...)
-#define DMESGE(x,a...)
extern u32 rt_global_debug_component;
#define RT_TRACE(component, x, args...) \
do { if(rt_global_debug_component & component) \
- printk(KERN_DEBUG RTL819xE_MODULE_NAME ":" x "\n" , \
+ printk(KERN_DEBUG RTL819xE_MODULE_NAME ":" x , \
##args);\
}while(0);
#define COMP_EVENTS BIT19 // Event handling
#define COMP_RF BIT20 // For RF.
-//1!!!!!!!!!!!!!!!!!!!!!!!!!!!
-//1//1Attention Please!!!<11n or 8190 specific code should be put below this line>
-//1!!!!!!!!!!!!!!!!!!!!!!!!!!!
+
+/* 11n or 8190 specific code should be put below this line */
+
#define COMP_FIRMWARE BIT21 //for firmware downloading
#define COMP_HT BIT22 // For 802.11n HT related information. by Emily 2006-8-11
#define COMP_ERR BIT31 // for error out, always on
#endif
-#define RTL819x_DEBUG
-#ifdef RTL819x_DEBUG
-#define assert(expr) \
- if (!(expr)) { \
- printk( "Assertion failed! %s,%s,%s,line=%d\n", \
- #expr,__FILE__,__FUNCTION__,__LINE__); \
- }
-//wb added to debug out data buf
-//if you want print DATA buffer related BA, please set ieee80211_debug_level to DATA|BA
-#define RT_DEBUG_DATA(level, data, datalen) \
- do{ if ((rt_global_debug_component & (level)) == (level)) \
- { \
- int i; \
- u8* pdata = (u8*) data; \
- printk(KERN_DEBUG RTL819xE_MODULE_NAME ": %s()\n", __FUNCTION__); \
- for(i=0; i<(int)(datalen); i++) \
- { \
- printk("%2x ", pdata[i]); \
- if ((i+1)%16 == 0) printk("\n"); \
- } \
- printk("\n"); \
- } \
- } while (0)
-#else
-#define assert(expr) do {} while (0)
-#define RT_DEBUG_DATA(level, data, datalen) do {} while(0)
-#endif /* RTL8169_DEBUG */
-
//
// Queue Select Value in TxDesc
#define EEPROM_Default_LegacyHTTxPowerDiff 0x4
#define IEEE80211_WATCH_DOG_TIME 2000
+typedef u32 RT_RF_CHANGE_SOURCE;
+#define RF_CHANGE_BY_SW BIT31
+#define RF_CHANGE_BY_HW BIT30
+#define RF_CHANGE_BY_PS BIT29
+#define RF_CHANGE_BY_IPS BIT28
+#define RF_CHANGE_BY_INIT 0 // Do not change the RFOff reason. Defined by Bruce, 2008-01-17.
+
+// RF state.
+typedef enum _RT_RF_POWER_STATE {
+ eRfOn,
+ eRfSleep,
+ eRfOff
+} RT_RF_POWER_STATE;
+
+typedef enum _RT_JOIN_ACTION {
+ RT_JOIN_INFRA = 1,
+ RT_JOIN_IBSS = 2,
+ RT_START_IBSS = 3,
+ RT_NO_ACTION = 4,
+} RT_JOIN_ACTION;
+
+typedef enum _IPS_CALLBACK_FUNCION {
+ IPS_CALLBACK_NONE = 0,
+ IPS_CALLBACK_MGNT_LINK_REQUEST = 1,
+ IPS_CALLBACK_JOIN_REQUEST = 2,
+} IPS_CALLBACK_FUNCION;
+
+typedef struct _RT_POWER_SAVE_CONTROL {
+ /* Inactive Power Save(IPS) : Disable RF when disconnected */
+ bool bInactivePs;
+ bool bIPSModeBackup;
+ bool bSwRfProcessing;
+ RT_RF_POWER_STATE eInactivePowerState;
+ struct work_struct InactivePsWorkItem;
+ struct timer_list InactivePsTimer;
+
+ /* Return point for join action */
+ IPS_CALLBACK_FUNCION ReturnPoint;
+
+ /* Recored Parameters for rescheduled JoinRequest */
+ bool bTmpBssDesc;
+ RT_JOIN_ACTION tmpJoinAction;
+ struct ieee80211_network tmpBssDesc;
+
+ /* Recored Parameters for rescheduled MgntLinkRequest */
+ bool bTmpScanOnly;
+ bool bTmpActiveScan;
+ bool bTmpFilterHiddenAP;
+ bool bTmpUpdateParms;
+ u8 tmpSsidBuf[33];
+ OCTET_STRING tmpSsid2Scan;
+ bool bTmpSsid2Scan;
+ u8 tmpNetworkType;
+ u8 tmpChannelNumber;
+ u16 tmpBcnPeriod;
+ u8 tmpDtimPeriod;
+ u16 tmpmCap;
+ OCTET_STRING tmpSuppRateSet;
+ u8 tmpSuppRateBuf[MAX_NUM_RATES];
+ bool bTmpSuppRate;
+ IbssParms tmpIbpm;
+ bool bTmpIbpm;
+
+ /*
+ * Leisure Power Save:
+ * Disable RF if connected but traffic is not busy
+ */
+ bool bLeisurePs;
+ u32 PowerProfile;
+ u8 LpsIdleCount;
+
+ u32 CurPsLevel;
+ u32 RegRfPsLevel;
+
+ bool bFwCtrlLPS;
+ u8 FWCtrlPSMode;
+
+ bool LinkReqInIPSRFOffPgs;
+ bool BufConnectinfoBefore;
+} RT_POWER_SAVE_CONTROL, *PRT_POWER_SAVE_CONTROL;
+
/* For rtl819x */
typedef struct _tx_desc_819x_pci {
//DWORD 0
//u32 Reserved;
}tx_fwinfo_819x_pci, *ptx_fwinfo_819x_pci;
-typedef struct rtl8192_rx_info {
- struct urb *urb;
- struct net_device *dev;
- u8 out_pipe;
-}rtl8192_rx_info ;
typedef struct _rx_desc_819x_pci{
//DOWRD 0
u16 Length:14;
#define MAX_FIRMWARE_INFORMATION_SIZE 32 /*2006/04/30 by Emily forRTL8190*/
#define MAX_802_11_HEADER_LENGTH (40 + MAX_FIRMWARE_INFORMATION_SIZE)
#define ENCRYPTION_MAX_OVERHEAD 128
-//#define USB_HWDESC_HEADER_LEN sizeof(tx_desc_819x_usb)
-//#define TX_PACKET_SHIFT_BYTES (USB_HWDESC_HEADER_LEN + sizeof(tx_fwinfo_819x_usb))
#define MAX_FRAGMENT_COUNT 8
#define MAX_TRANSMIT_BUFFER_SIZE (1600+(MAX_802_11_HEADER_LENGTH+ENCRYPTION_MAX_OVERHEAD)*MAX_FRAGMENT_COUNT)
DESC_PACKET_TYPE_NORMAL = 1,
}desc_packet_type_e;
-typedef enum _firmware_source{
- FW_SOURCE_IMG_FILE = 0,
- FW_SOURCE_HEADER_FILE = 1, //from header file
-}firmware_source_e, *pfirmware_source_e;
-
typedef enum _firmware_status{
FW_STATUS_0_INIT = 0,
FW_STATUS_1_MOVE_BOOT_CODE = 1,
FW_STATUS_5_READY = 5,
}firmware_status_e;
-typedef struct _rt_firmare_seg_container {
- u16 seg_size;
- u8 *seg_ptr;
-}fw_seg_container, *pfw_seg_container;
-
typedef struct _rt_firmware{
firmware_status_e firmware_status;
u16 cmdpacket_frag_thresold;
u8 firmware_buf[MAX_FW_INIT_STEP][RTL8190_MAX_FIRMWARE_CODE_SIZE];
u16 firmware_buf_size[MAX_FW_INIT_STEP];
}rt_firmware, *prt_firmware;
-//+by amy 080507
+
#define MAX_RECEIVE_BUFFER_SIZE 9100 // Add this to 9100 bytes to receive A-MSDU from RT-AP
/* Firmware Queue Layout */
#define RSVD_FW_QUEUE_PAGE_BCN_SHIFT 0x00
#define RSVD_FW_QUEUE_PAGE_PUB_SHIFT 0x08
-//8187B Security
-//#define RWCAM 0xA0 // Software read/write CAM config
-//#define WCAMI 0xA4 // Software write CAM input content
-//#define RCAMO 0xA8 // Output value from CAM according to 0xa0 setting
#define DCAM 0xAC // Debug CAM Interface
#define AESMSK_FC 0xB2 // AES Mask register for frame control (0xB2~0xB3). Added by Annie, 2006-03-06.
#define CAM_CONTENT_COUNT 8
-//#define CFG_DEFAULT_KEY BIT5
#define CFG_VALID BIT15
-#if 0
-//----------------------------------------------------------------------------
-// 8187B WPA Config Register (offset 0xb0, 1 byte)
-//----------------------------------------------------------------------------
-#define SCR_UseDK 0x01
-#define SCR_TxSecEnable 0x02
-#define SCR_RxSecEnable 0x04
-
-//----------------------------------------------------------------------------
-// 8187B CAM Config Setting (offset 0xb0, 1 byte)
-//----------------------------------------------------------------------------
-#define CAM_VALID 0x8000
-#define CAM_NOTVALID 0x0000
-#define CAM_USEDK 0x0020
-
-
-#define CAM_NONE 0x0
-#define CAM_WEP40 0x01
-#define CAM_TKIP 0x02
-#define CAM_AES 0x04
-#define CAM_WEP104 0x05
-
-//#define CAM_SIZE 16
-#define TOTAL_CAM_ENTRY 16
-#define CAM_ENTRY_LEN_IN_DW 6 // 6, unit: in u4byte. Added by Annie, 2006-05-25.
-#define CAM_ENTRY_LEN_IN_BYTE (CAM_ENTRY_LEN_IN_DW*sizeof(u32)) // 24, unit: in u1byte. Added by Annie, 2006-05-25.
-
-#define CAM_CONFIG_USEDK 1
-#define CAM_CONFIG_NO_USEDK 0
-
-#define CAM_WRITE 0x00010000
-#define CAM_READ 0x00000000
-#define CAM_POLLINIG 0x80000000
-
-//=================================================================
-//=================================================================
-
-#endif
#define EPROM_93c46 0
#define EPROM_93c56 1
#define DEFAULT_FRAG_THRESHOLD 2342U
#define MIN_FRAG_THRESHOLD 256U
#define DEFAULT_BEACONINTERVAL 0x64U
-#define DEFAULT_BEACON_ESSID "Rtl819xU"
-#define DEFAULT_SSID ""
#define DEFAULT_RETRY_RTS 7
#define DEFAULT_RETRY_DATA 7
-#define PRISM_HDR_SIZE 64
#define PHY_RSSI_SLID_WIN_MAX 100
} buffer;
-typedef struct rtl_reg_debug{
- unsigned int cmd;
- struct {
- unsigned char type;
- unsigned char addr;
- unsigned char page;
- unsigned char length;
- } head;
- unsigned char buf[0xff];
-}rtl_reg_debug;
-
-#if 0
-
-typedef struct tx_pendingbuf
-{
- struct ieee80211_txb *txb;
- short ispending;
- short descfrag;
-} tx_pendigbuf;
-
-#endif
-
typedef struct _rt_9x_tx_rate_history {
u32 cck[4];
u32 ofdm[8];
typedef struct Stats
{
- unsigned long txrdu;
unsigned long rxrdu;
- //unsigned long rxnolast;
- //unsigned long rxnodata;
-// unsigned long rxreset;
-// unsigned long rxnopointer;
unsigned long rxok;
- unsigned long rxframgment;
- unsigned long rxcmdpkt[4]; //08/05/08 amy rx cmd element txfeedback/bcn report/cfg set/query
- unsigned long rxurberr;
- unsigned long rxstaterr;
- unsigned long rxcrcerrmin;//crc error (0-500)
- unsigned long rxcrcerrmid;//crc error (500-1000)
- unsigned long rxcrcerrmax;//crc error (>1000)
- unsigned long received_rate_histogram[4][32]; //0: Total, 1:OK, 2:CRC, 3:ICV, 2007 07 03 cosa
- unsigned long received_preamble_GI[2][32]; //0: Long preamble/GI, 1:Short preamble/GI
- unsigned long rx_AMPDUsize_histogram[5]; // level: (<4K), (4K~8K), (8K~16K), (16K~32K), (32K~64K)
- unsigned long rx_AMPDUnum_histogram[5]; // level: (<5), (5~10), (10~20), (20~40), (>40)
- unsigned long numpacket_matchbssid; // debug use only.
- unsigned long numpacket_toself; // debug use only.
- unsigned long num_process_phyinfo; // debug use only.
- unsigned long numqry_phystatus;
- unsigned long numqry_phystatusCCK;
- unsigned long numqry_phystatusHT;
- unsigned long received_bwtype[5]; //0: 20M, 1: funn40M, 2: upper20M, 3: lower20M, 4: duplicate
- unsigned long txnperr;
- unsigned long txnpdrop;
- unsigned long txresumed;
-// unsigned long rxerr;
+ unsigned long received_rate_histogram[4][32]; //0: Total, 1:OK, 2:CRC, 3:ICV
unsigned long rxoverflow;
unsigned long rxint;
- unsigned long txnpokint;
-// unsigned long txhpokint;
-// unsigned long txhperr;
- unsigned long ints;
- unsigned long shints;
unsigned long txoverflow;
-// unsigned long rxdmafail;
-// unsigned long txbeacon;
-// unsigned long txbeaconerr;
- unsigned long txlpokint;
- unsigned long txlpdrop;
- unsigned long txlperr;
unsigned long txbeokint;
- unsigned long txbedrop;
- unsigned long txbeerr;
unsigned long txbkokint;
- unsigned long txbkdrop;
- unsigned long txbkerr;
unsigned long txviokint;
- unsigned long txvidrop;
- unsigned long txvierr;
unsigned long txvookint;
- unsigned long txvodrop;
- unsigned long txvoerr;
unsigned long txbeaconokint;
- unsigned long txbeacondrop;
unsigned long txbeaconerr;
unsigned long txmanageokint;
- unsigned long txmanagedrop;
- unsigned long txmanageerr;
unsigned long txcmdpktokint;
- unsigned long txdatapkt;
unsigned long txfeedback;
unsigned long txfeedbackok;
unsigned long txoktotal;
- unsigned long txokbytestotal;
- unsigned long txokinperiod;
- unsigned long txmulticast;
- unsigned long txbytesmulticast;
- unsigned long txbroadcast;
- unsigned long txbytesbroadcast;
- unsigned long txunicast;
unsigned long txbytesunicast;
unsigned long rxbytesunicast;
- unsigned long txfeedbackfail;
- unsigned long txerrtotal;
- unsigned long txerrbytestotal;
- unsigned long txerrmulticast;
- unsigned long txerrbroadcast;
- unsigned long txerrunicast;
- unsigned long txretrycount;
- unsigned long txfeedbackretry;
- u8 last_packet_rate;
+
unsigned long slide_signal_strength[100];
unsigned long slide_evm[100];
unsigned long slide_rssi_total; // For recording sliding window's RSSI value
unsigned long slide_evm_total; // For recording sliding window's EVM value
long signal_strength; // Transformed, in dbm. Beautified signal strength for UI, not correct.
- long signal_quality;
- long last_signal_strength_inpercent;
- long recv_signal_power; // Correct smoothed ss in Dbm, only used in driver to report real power now.
u8 rx_rssi_percentage[4];
u8 rx_evm_percentage[2];
- long rxSNRdB[4];
- rt_tx_rahis_t txrate;
- u32 Slide_Beacon_pwdb[100]; //cosa add for beacon rssi
- u32 Slide_Beacon_Total; //cosa add for beacon rssi
+ u32 Slide_Beacon_pwdb[100];
+ u32 Slide_Beacon_Total;
RT_SMOOTH_DATA_4RF cck_adc_pwdb;
- u32 CurrentShowTxate;
-
-
} Stats;
#define HAL_PRIME_CHNL_OFFSET_LOWER 1
#define HAL_PRIME_CHNL_OFFSET_UPPER 2
-//+by amy 080507
-
typedef struct ChnlAccessSetting {
u16 SIFS_Timer;
u16 DIFS_Timer;
u32 rfLSSIReadBack; //LSSI RF readback data // 0x8a0~0x8af [16 bytes]
}BB_REGISTER_DEFINITION_T, *PBB_REGISTER_DEFINITION_T;
-typedef enum _RT_RF_TYPE_819xU{
- RF_TYPE_MIN = 0,
- RF_8225,
- RF_8256,
- RF_8258,
- RF_PSEUDO_11N = 4,
-}RT_RF_TYPE_819xU, *PRT_RF_TYPE_819xU;
-
-
typedef struct _rate_adaptive
{
u8 rate_adaptive_disabled;
RT_CID_COREGA = 14,
}RT_CUSTOMER_ID, *PRT_CUSTOMER_ID;
-//================================================================================
-// LED customization.
-//================================================================================
+/* LED customization. */
typedef enum _LED_STRATEGY_8190{
SW_LED_MODE0, // SW control 1 LED via GPIO0. It is default option.
typedef struct r8192_priv
{
struct pci_dev *pdev;
- //added for maintain info from eeprom
+ /* maintain info from eeprom */
short epromtype;
u16 eeprom_vid;
u16 eeprom_did;
u8 eeprom_CustomerID;
u16 eeprom_ChannelPlan;
RT_CUSTOMER_ID CustomerID;
- LED_STRATEGY_8190 LedStrategy;
- //bool bDcut;
u8 IC_Cut;
int irq;
- short irq_enabled;
struct ieee80211_device *ieee80211;
#ifdef ENABLE_LPS
bool ps_force;
#endif
bool being_init_adapter;
u8 Rf_Mode;
- short card_8192; /* O: rtl8192, 1:rtl8185 V B/C, 2:rtl8185 V D */
u8 card_8192_version; /* if TCR reports card V B/C this discriminates */
-// short phy_ver; /* meaningful for rtl8225 1:A 2:B 3:C */
- short enable_gpio0;
- enum card_type {PCI,MINIPCI,CARDBUS,USB/*rtl8187*/}card_type;
- short hw_plcp_len;
- short plcp_preamble_mode;
- u8 ScanDelay;
- spinlock_t irq_lock;
spinlock_t irq_th_lock;
- spinlock_t tx_lock;
spinlock_t rf_ps_lock;
struct mutex mutex;
- spinlock_t rf_lock; //used to lock rf write operation added by wb
- spinlock_t ps_lock;
- u32 irq_mask;
-// short irq_enabled;
-// struct net_device *dev; //comment this out.
short chan;
short sens;
- short max_sens;
- u32 rx_prevlen;
-/*RX stuff*/
+ /* RX stuff */
rx_desc_819x_pci *rx_ring;
dma_addr_t rx_ring_dma;
unsigned int rx_idx;
int rxringcount;
u16 rxbuffersize;
-
- struct sk_buff *rx_skb;
- u32 *rxring;
- u32 *rxringtail;
- dma_addr_t rxringdma;
- struct buffer *rxbuffer;
- struct buffer *rxbufferhead;
- short rx_skb_complete;
-/*TX stuff*/
+ /* TX stuff */
struct rtl8192_tx_ring tx_ring[MAX_TX_QUEUE_COUNT];
int txringcount;
-//{
- int txbuffsize;
- int txfwbuffersize;
- //struct tx_pendingbuf txnp_pending;
- //struct tasklet_struct irq_tx_tasklet;
+
struct tasklet_struct irq_rx_tasklet;
struct tasklet_struct irq_tx_tasklet;
struct tasklet_struct irq_prepare_beacon_tasklet;
- struct buffer *txmapbufs;
- struct buffer *txbkpbufs;
- struct buffer *txbepbufs;
- struct buffer *txvipbufs;
- struct buffer *txvopbufs;
- struct buffer *txcmdbufs;
- struct buffer *txmapbufstail;
- struct buffer *txbkpbufstail;
- struct buffer *txbepbufstail;
- struct buffer *txvipbufstail;
- struct buffer *txvopbufstail;
- struct buffer *txcmdbufstail;
- /* adhoc/master mode stuff */
- ptx_ring txbeaconringtail;
- dma_addr_t txbeaconringdma;
- ptx_ring txbeaconring;
- int txbeaconcount;
- struct buffer *txbeaconbufs;
- struct buffer *txbeaconbufstail;
- ptx_ring txmapring;
- ptx_ring txbkpring;
- ptx_ring txbepring;
- ptx_ring txvipring;
- ptx_ring txvopring;
- ptx_ring txcmdring;
- ptx_ring txmapringtail;
- ptx_ring txbkpringtail;
- ptx_ring txbepringtail;
- ptx_ring txvipringtail;
- ptx_ring txvopringtail;
- ptx_ring txcmdringtail;
- ptx_ring txmapringhead;
- ptx_ring txbkpringhead;
- ptx_ring txbepringhead;
- ptx_ring txvipringhead;
- ptx_ring txvopringhead;
- ptx_ring txcmdringhead;
- dma_addr_t txmapringdma;
- dma_addr_t txbkpringdma;
- dma_addr_t txbepringdma;
- dma_addr_t txvipringdma;
- dma_addr_t txvopringdma;
- dma_addr_t txcmdringdma;
- // u8 chtxpwr[15]; //channels from 1 to 14, 0 not used
-// u8 chtxpwr_ofdm[15]; //channels from 1 to 14, 0 not used
-// u8 cck_txpwr_base;
-// u8 ofdm_txpwr_base;
-// u8 challow[15]; //channels from 1 to 14, 0 not used
+
short up;
short crcmon; //if 1 allow bad crc frame reception in monitor mode
-// short prism_hdr;
-
-// struct timer_list scan_timer;
- /*short scanpending;
- short stopscan;*/
-// spinlock_t scan_lock;
-// u8 active_probe;
- //u8 active_scan_num;
struct semaphore wx_sem;
struct semaphore rf_sem; //used to lock rf write operation added by wb, modified by david
-// short hw_wep;
+ u8 rf_type; /* 0 means 1T2R, 1 means 2T4R */
-// short digphy;
-// short antb;
-// short diversity;
-// u8 cs_treshold;
-// short rcr_csense;
- u8 rf_type; //0 means 1T2R, 1 means 2T4R
- RT_RF_TYPE_819xU rf_chip;
-
-// u32 key0[4];
short (*rf_set_sens)(struct net_device *dev,short sens);
u8 (*rf_set_chan)(struct net_device *dev,u8 ch);
- void (*rf_close)(struct net_device *dev);
- void (*rf_init)(struct net_device *dev);
- //short rate;
short promisc;
- /*stats*/
+ /* stats */
struct Stats stats;
struct iw_statistics wstats;
struct proc_dir_entry *dir_dev;
+ struct ieee80211_rx_stats previous_stats;
- /*RX stuff*/
-// u32 *rxring;
-// u32 *rxringtail;
-// dma_addr_t rxringdma;
-
-#ifdef THOMAS_BEACON
- u32 *oldaddr;
-#endif
-#ifdef THOMAS_TASKLET
- atomic_t irt_counter;//count for irq_rx_tasklet
-#endif
-#ifdef JACKSON_NEW_RX
- struct sk_buff **pp_rxskb;
- int rx_inx;
-#endif
-
-/* modified by davad for Rx process */
- struct sk_buff_head rx_queue;
- struct sk_buff_head skb_queue;
- struct work_struct qos_activate;
- short tx_urb_index;
- atomic_t tx_pending[0x10];//UART_PRIORITY+1
-
- struct urb *rxurb_task;
+ /* RX stuff */
+ struct sk_buff_head skb_queue;
+ struct work_struct qos_activate;
//2 Tx Related variables
u16 ShortRetryLimit;
u16 LongRetryLimit;
- u32 TransmitConfig;
- u8 RegCWinMin; // For turbo mode CW adaptive. Added by Annie, 2005-10-27.
u32 LastRxDescTSFHigh;
u32 LastRxDescTSFLow;
//2 Rx Related variables
- u16 EarlyRxThreshold;
u32 ReceiveConfig;
- u8 AcmControl;
-
- u8 RFProgType;
u8 retry_data;
u8 retry_rts;
- u16 rts;
-
- struct ChnlAccessSetting ChannelAccessSetting;
struct work_struct reset_wq;
+ u8 rx_chk_cnt;
-/**********************************************************/
//for rtl819xPci
// Data Rate Config. Added by Annie, 2006-04-13.
u16 basic_rate;
/*Firmware*/
prt_firmware pFirmware;
rtl819x_loopback_e LoopbackMode;
- firmware_source_e firmware_source;
bool AutoloadFailFlag;
- u16 EEPROMTxPowerDiff;
u16 EEPROMAntPwDiff; // Antenna gain offset from B/C/D to A
u8 EEPROMThermalMeter;
- u8 EEPROMPwDiff;
u8 EEPROMCrystalCap;
- u8 EEPROM_Def_Ver;
u8 EEPROMTxPowerLevelCCK[14];// CCK channel 1~14
// The following definition is for eeprom 93c56
u8 EEPROMRfACCKChnl1TxPwLevel[3]; //RF-A CCK Tx Power Level at channel 7
u8 EEPROMRfAOfdmChnlTxPwLevel[3];//RF-A CCK Tx Power Level at [0],[1],[2] = channel 1,7,13
u8 EEPROMRfCCCKChnl1TxPwLevel[3]; //RF-C CCK Tx Power Level at channel 7
u8 EEPROMRfCOfdmChnlTxPwLevel[3];//RF-C CCK Tx Power Level at [0],[1],[2] = channel 1,7,13
- u8 EEPROMTxPowerLevelCCK_V1[3];
u8 EEPROMTxPowerLevelOFDM24G[14]; // OFDM 2.4G channel 1~14
- u8 EEPROMTxPowerLevelOFDM5G[24]; // OFDM 5G
u8 EEPROMLegacyHTTxPowerDiff; // Legacy to HT rate power diff
bool bTXPowerDataReadFromEEPORM;
/*channel plan*/
u16 RegChannelPlan; // Channel Plan specifed by user, 15: following setting of EEPROM, 0-14: default channel plan index specified by user.
u16 ChannelPlan;
/*PS related*/
- bool RegRfOff;
// Rf off action for power save
u8 bHwRfOffAction; //0:No action, 1:By GPIO, 2:By Disable
/*PHY related*/
u8 TxPowerLevelOFDM24G_A[14]; // RF-A, OFDM 2.4G channel 1~14
u8 TxPowerLevelOFDM24G_C[14]; // RF-C, OFDM 2.4G channel 1~14
u8 LegacyHTTxPowerDiff; // Legacy to HT rate power diff
- u8 TxPowerDiff;
- char RF_C_TxPwDiff; // Antenna gain offset, rf-c to rf-a
u8 AntennaTxPwDiff[3]; // Antenna gain offset, index 0 for B, 1 for C, and 2 for D
u8 CrystalCap; // CrystalCap.
u8 ThermalMeter[2]; // ThermalMeter, index 0 for RFIC0, and 1 for RFIC1
char CCKPresentAttentuation_difference;
char CCKPresentAttentuation;
// Use to calculate PWBD.
+ RT_RF_POWER_STATE eRFPowerState;
+ RT_RF_CHANGE_SOURCE RfOffReason;
+ RT_POWER_SAVE_CONTROL PowerSaveControl;
u8 bCckHighPower;
long undecorated_smoothed_pwdb;
long undecorated_smoothed_cck_adc_pwdb[4];
bool brfpath_rxenable[4];
//+by amy 080507
struct timer_list watch_dog_timer;
+ u8 watchdog_last_time;
+ u8 watchdog_check_reset_cnt;
//+by amy 080515 for dynamic mechenism
//Add by amy Tx Power Control for Near/Far Range 2008/05/15
- bool bdynamic_txpower; //bDynamicTxPower
bool bDynamicTxHighPower; // Tx high power state
bool bDynamicTxLowPower; // Tx low power state
bool bLastDTPFlag_High;
bool bLastDTPFlag_Low;
- bool bstore_last_dtpflag;
- bool bstart_txctrl_bydtp; //Define to discriminate on High power State or on sitesuvey to change Tx gain index
+ /* OFDM RSSI. For high power or not */
+ u8 phy_check_reg824;
+ u32 phy_reg824_bit9;
+
//Add by amy for Rate Adaptive
rate_adaptive rate_adaptive;
//Add by amy for TX power tracking
//2008/05/15 Mars OPEN/CLOSE TX POWER TRACKING
- txbbgain_struct txbbgain_table[TxBBGainTableLength];
+ const txbbgain_struct * txbbgain_table;
u8 txpower_count;//For 6 sec do tracking again
bool btxpower_trackingInit;
u8 OFDM_index;
u8 Record_CCK_20Mindex;
u8 Record_CCK_40Mindex;
//2007/09/10 Mars Add CCK TX Power Tracking
- ccktxbbgain_struct cck_txbbgain_table[CCKTxBBGainTableLength];
- ccktxbbgain_struct cck_txbbgain_ch14_table[CCKTxBBGainTableLength];
+ const ccktxbbgain_struct *cck_txbbgain_table;
+ const ccktxbbgain_struct *cck_txbbgain_ch14_table;
u8 rfa_txpowertrackingindex;
u8 rfa_txpowertrackingindex_real;
u8 rfa_txpowertracking_default;
bool bis_cur_rdlstate;
struct timer_list fsync_timer;
- bool bfsync_processing; // 500ms Fsync timer is active or not
u32 rate_record;
u32 rateCountDiffRecord;
u32 ContiuneDiffCount;
u8 framesync;
u32 framesyncC34;
u8 framesyncMonitor;
- //Added by amy 080516 for RX related
- u16 nrxAMPDU_size;
- u8 nrxAMPDU_aggr_num;
-
- /*Last RxDesc TSF value*/
- u32 last_rxdesc_tsf_high;
- u32 last_rxdesc_tsf_low;
//by amy for gpio
bool bHwRadioOff;
//by amy for ps
- bool RFChangeInProgress; // RF Chnage in progress, by Bruce, 2007-10-30
- bool SetRFPowerStateInProgress;
RT_OP_MODE OpMode;
//by amy for reset_count
u32 reset_count;
- bool bpbc_pressed;
- //by amy for debug
- u32 txpower_checkcnt;
- u32 txpower_tracking_callback_cnt;
- u8 thermal_read_val[40];
- u8 thermal_readback_index;
- u32 ccktxpower_adjustcnt_not_ch14;
- u32 ccktxpower_adjustcnt_ch14;
- u8 tx_fwinfo_force_subcarriermode;
- u8 tx_fwinfo_force_subcarrierval;
//by amy for silent reset
RESET_TYPE ResetProgress;
struct workqueue_struct *priv_wq;
}r8192_priv;
-// for rtl8187
-// now mirging to rtl8187B
-/*
-typedef enum{
- LOW_PRIORITY = 0x02,
- NORM_PRIORITY
- } priority_t;
-*/
-//for rtl8187B
-#if 0
-typedef enum{
- BULK_PRIORITY = 0x01,
- //RSVD0,
- //RSVD1,
- LOW_PRIORITY,
- NORM_PRIORITY,
- VO_PRIORITY,
- VI_PRIORITY, //0x05
- BE_PRIORITY,
- BK_PRIORITY,
- CMD_PRIORITY,//0x8
- RSVD3,
- BEACON_PRIORITY, //0x0A
- HIGH_PRIORITY,
- MANAGE_PRIORITY,
- RSVD4,
- RSVD5,
- UART_PRIORITY //0x0F
-} priority_t;
-#endif
-typedef enum{
- NIC_8192E = 1,
- } nic_t;
-
-
-#if 0 //defined in Qos.h
-//typedef u32 AC_CODING;
-#define AC0_BE 0 // ACI: 0x00 // Best Effort
-#define AC1_BK 1 // ACI: 0x01 // Background
-#define AC2_VI 2 // ACI: 0x10 // Video
-#define AC3_VO 3 // ACI: 0x11 // Voice
-#define AC_MAX 4 // Max: define total number; Should not to be used as a real enum.
-
-//
-// ECWmin/ECWmax field.
-// Ref: WMM spec 2.2.2: WME Parameter Element, p.13.
-//
-typedef union _ECW{
- u8 charData;
- struct
- {
- u8 ECWmin:4;
- u8 ECWmax:4;
- }f; // Field
-}ECW, *PECW;
-
-//
-// ACI/AIFSN Field.
-// Ref: WMM spec 2.2.2: WME Parameter Element, p.12.
-//
-typedef union _ACI_AIFSN{
- u8 charData;
-
- struct
- {
- u8 AIFSN:4;
- u8 ACM:1;
- u8 ACI:2;
- u8 Reserved:1;
- }f; // Field
-}ACI_AIFSN, *PACI_AIFSN;
-
-//
-// AC Parameters Record Format.
-// Ref: WMM spec 2.2.2: WME Parameter Element, p.12.
-//
-typedef union _AC_PARAM{
- u32 longData;
- u8 charData[4];
-
- struct
- {
- ACI_AIFSN AciAifsn;
- ECW Ecw;
- u16 TXOPLimit;
- }f; // Field
-}AC_PARAM, *PAC_PARAM;
-
-#endif
bool init_firmware(struct net_device *dev);
-short rtl8192_tx(struct net_device *dev, struct sk_buff* skb);
-u32 read_cam(struct net_device *dev, u8 addr);
-void write_cam(struct net_device *dev, u8 addr, u32 data);
-u8 read_nic_byte(struct net_device *dev, int x);
-u8 read_nic_byte_E(struct net_device *dev, int x);
-u32 read_nic_dword(struct net_device *dev, int x);
-u16 read_nic_word(struct net_device *dev, int x) ;
-void write_nic_byte(struct net_device *dev, int x,u8 y);
-void write_nic_byte_E(struct net_device *dev, int x,u8 y);
-void write_nic_word(struct net_device *dev, int x,u16 y);
-void write_nic_dword(struct net_device *dev, int x,u32 y);
-
-void rtl8192_halt_adapter(struct net_device *dev, bool reset);
-void rtl8192_rx_enable(struct net_device *);
-void rtl8192_tx_enable(struct net_device *);
-
-void rtl8192_disassociate(struct net_device *dev);
-//void fix_rx_fifo(struct net_device *dev);
-void rtl8185_set_rf_pins_enable(struct net_device *dev,u32 a);
-
-void rtl8192_set_anaparam(struct net_device *dev,u32 a);
-void rtl8185_set_anaparam2(struct net_device *dev,u32 a);
-void rtl8192_update_msr(struct net_device *dev);
+u32 read_cam(struct r8192_priv *priv, u8 addr);
+void write_cam(struct r8192_priv *priv, u8 addr, u32 data);
+u8 read_nic_byte(struct r8192_priv *priv, int x);
+u32 read_nic_dword(struct r8192_priv *priv, int x);
+u16 read_nic_word(struct r8192_priv *priv, int x) ;
+void write_nic_byte(struct r8192_priv *priv, int x,u8 y);
+void write_nic_word(struct r8192_priv *priv, int x,u16 y);
+void write_nic_dword(struct r8192_priv *priv, int x,u32 y);
+
int rtl8192_down(struct net_device *dev);
int rtl8192_up(struct net_device *dev);
-void rtl8192_commit(struct net_device *dev);
-void rtl8192_set_chan(struct net_device *dev,short ch);
+void rtl8192_commit(struct r8192_priv *priv);
void write_phy(struct net_device *dev, u8 adr, u8 data);
-void write_phy_cck(struct net_device *dev, u8 adr, u32 data);
-void write_phy_ofdm(struct net_device *dev, u8 adr, u32 data);
-void rtl8185_tx_antenna(struct net_device *dev, u8 ant);
-void rtl8187_set_rxconf(struct net_device *dev);
-//short check_nic_enough_desc(struct net_device *dev, priority_t priority);
-void CamResetAllEntry(struct net_device* dev);
+void CamResetAllEntry(struct r8192_priv *priv);
void EnableHWSecurityConfig8192(struct net_device *dev);
void setKey(struct net_device *dev, u8 EntryNo, u8 KeyIndex, u16 KeyType, const u8 *MacAddr, u8 DefaultKey, u32 *KeyContent );
-void dm_cck_txpower_adjust(struct net_device *dev, bool binch14);
void firmware_init_param(struct net_device *dev);
RT_STATUS cmpk_message_handle_tx(struct net_device *dev, u8* codevirtualaddress, u32 packettype, u32 buffer_len);
-void rtl8192_hw_wakeup_wq (struct work_struct *work);
-short rtl8192_is_tx_queue_empty(struct net_device *dev);
#ifdef ENABLE_IPS
void IPSEnter(struct net_device *dev);
-void IPSLeave(struct net_device *dev);
-void InactivePsWorkItemCallback(struct net_device *dev);
-void IPSLeave_wq(void *data);
+void IPSLeave(struct r8192_priv *priv);
+void IPSLeave_wq(struct work_struct *work);
void ieee80211_ips_leave_wq(struct net_device *dev);
void ieee80211_ips_leave(struct net_device *dev);
#endif
void LeisurePSLeave(struct net_device *dev);
#endif
-bool NicIFEnableNIC(struct net_device* dev);
-bool NicIFDisableNIC(struct net_device* dev);
+bool NicIFEnableNIC(struct r8192_priv *priv);
+bool NicIFDisableNIC(struct r8192_priv *priv);
-void rtl8192_irq_disable(struct net_device *dev);
-void PHY_SetRtl8192eRfOff(struct net_device* dev);
+void PHY_SetRtl8192eRfOff(struct r8192_priv *priv);
#endif
projects / deliverable / linux.git / blobdiff