+++ /dev/null
-/******************************************************************************
- *
- * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of version 2 of the GNU General Public License as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
- * more details.
- *
- ******************************************************************************/
-#ifndef __RTL8723A_HAL_H__
-#define __RTL8723A_HAL_H__
-
-#include "rtl8723a_spec.h"
-#include "rtl8723a_pg.h"
-#include "Hal8723APhyReg.h"
-#include "Hal8723APhyCfg.h"
-#include "rtl8723a_rf.h"
-#include "rtl8723a_bt_intf.h"
-#ifdef CONFIG_8723AU_BT_COEXIST
-#include "rtl8723a_bt-coexist.h"
-#endif
-#include "rtl8723a_dm.h"
-#include "rtl8723a_recv.h"
-#include "rtl8723a_xmit.h"
-#include "rtl8723a_cmd.h"
-#include "rtl8723a_sreset.h"
-#include "rtw_efuse.h"
-#include "rtw_eeprom.h"
-
-#include "odm_precomp.h"
-#include "odm.h"
-
-
-/* 2TODO: We should define 8192S firmware related macro settings here!! */
-#define RTL819X_DEFAULT_RF_TYPE RF_1T2R
-#define RTL819X_TOTAL_RF_PATH 2
-
-/* */
-/* RTL8723S From header */
-/* */
-
-/* Fw Array */
-#define Rtl8723_FwImageArray Rtl8723UFwImgArray
-#define Rtl8723_FwUMCBCutImageArrayWithBT Rtl8723UFwUMCBCutImgArrayWithBT
-#define Rtl8723_FwUMCBCutImageArrayWithoutBT Rtl8723UFwUMCBCutImgArrayWithoutBT
-
-#define Rtl8723_ImgArrayLength Rtl8723UImgArrayLength
-#define Rtl8723_UMCBCutImgArrayWithBTLength Rtl8723UUMCBCutImgArrayWithBTLength
-#define Rtl8723_UMCBCutImgArrayWithoutBTLength Rtl8723UUMCBCutImgArrayWithoutBTLength
-
-#define Rtl8723_PHY_REG_Array_PG Rtl8723UPHY_REG_Array_PG
-#define Rtl8723_PHY_REG_Array_PGLength Rtl8723UPHY_REG_Array_PGLength
-
-#define Rtl8723_FwUMCBCutMPImageArray Rtl8723SFwUMCBCutMPImgAr
-#define Rtl8723_UMCBCutMPImgArrayLength Rtl8723SUMCBCutMPImgArrayLength
-
-#define DRVINFO_SZ 4 /* unit is 8bytes */
-#define PageNum_128(_Len) (u32)(((_Len)>>7) + ((_Len)&0x7F ? 1:0))
-
-#define FW_8723A_SIZE 0x8000
-#define FW_8723A_START_ADDRESS 0x1000
-#define FW_8723A_END_ADDRESS 0x1FFF /* 0x5FFF */
-
-#define MAX_PAGE_SIZE 4096 /* @ page : 4k bytes */
-
-#define IS_FW_HEADER_EXIST(_pFwHdr) ((le16_to_cpu(_pFwHdr->Signature)&0xFFF0) == 0x92C0 ||\
- (le16_to_cpu(_pFwHdr->Signature)&0xFFF0) == 0x88C0 ||\
- (le16_to_cpu(_pFwHdr->Signature)&0xFFF0) == 0x2300)
-
-/* */
-/* This structure must be cared byte-ordering */
-/* */
-/* Added by tynli. 2009.12.04. */
-struct rt_8723a_firmware_hdr {
- /* 8-byte alinment required */
-
- /* LONG WORD 0 ---- */
- __le16 Signature; /*
- * 92C0: test chip; 92C, 88C0: test chip;
- * 88C1: MP A-cut; 92C1: MP A-cut
- */
- u8 Category; /* AP/NIC and USB/PCI */
- u8 Function; /* Reserved for different FW function indcation, for further use when driver needs to download different FW in different conditions */
- __le16 Version; /* FW Version */
- u8 Subversion; /* FW Subversion, default 0x00 */
- u8 Rsvd1;
-
-
- /* LONG WORD 1 ---- */
- u8 Month; /* Release time Month field */
- u8 Date; /* Release time Date field */
- u8 Hour; /* Release time Hour field */
- u8 Minute; /* Release time Minute field */
- __le16 RamCodeSize; /* The size of RAM code */
- __le16 Rsvd2;
-
- /* LONG WORD 2 ---- */
- __le32 SvnIdx; /* The SVN entry index */
- __le32 Rsvd3;
-
- /* LONG WORD 3 ---- */
- __le32 Rsvd4;
- __le32 Rsvd5;
-};
-
-#define DRIVER_EARLY_INT_TIME 0x05
-#define BCN_DMA_ATIME_INT_TIME 0x02
-
-
-/* BK, BE, VI, VO, HCCA, MANAGEMENT, COMMAND, HIGH, BEACON. */
-#define MAX_TX_QUEUE 9
-
-#define TX_SELE_HQ BIT(0) /* High Queue */
-#define TX_SELE_LQ BIT(1) /* Low Queue */
-#define TX_SELE_NQ BIT(2) /* Normal Queue */
-
-/* Note: We will divide number of page equally for each queue other than public queue! */
-#define TX_TOTAL_PAGE_NUMBER 0xF8
-#define TX_PAGE_BOUNDARY (TX_TOTAL_PAGE_NUMBER + 1)
-
-/* For Normal Chip Setting */
-/* (HPQ + LPQ + NPQ + PUBQ) shall be TX_TOTAL_PAGE_NUMBER */
-#define NORMAL_PAGE_NUM_PUBQ 0xE7
-#define NORMAL_PAGE_NUM_HPQ 0x0C
-#define NORMAL_PAGE_NUM_LPQ 0x02
-#define NORMAL_PAGE_NUM_NPQ 0x02
-
-/* For Test Chip Setting */
-/* (HPQ + LPQ + PUBQ) shall be TX_TOTAL_PAGE_NUMBER */
-#define TEST_PAGE_NUM_PUBQ 0x7E
-
-/* For Test Chip Setting */
-#define WMM_TEST_TX_TOTAL_PAGE_NUMBER 0xF5
-#define WMM_TEST_TX_PAGE_BOUNDARY (WMM_TEST_TX_TOTAL_PAGE_NUMBER + 1) /* F6 */
-
-#define WMM_TEST_PAGE_NUM_PUBQ 0xA3
-#define WMM_TEST_PAGE_NUM_HPQ 0x29
-#define WMM_TEST_PAGE_NUM_LPQ 0x29
-
-/* Note: For Normal Chip Setting, modify later */
-#define WMM_NORMAL_TX_TOTAL_PAGE_NUMBER 0xF5
-#define WMM_NORMAL_TX_PAGE_BOUNDARY (WMM_TEST_TX_TOTAL_PAGE_NUMBER + 1) /* F6 */
-
-#define WMM_NORMAL_PAGE_NUM_PUBQ 0xB0
-#define WMM_NORMAL_PAGE_NUM_HPQ 0x29
-#define WMM_NORMAL_PAGE_NUM_LPQ 0x1C
-#define WMM_NORMAL_PAGE_NUM_NPQ 0x1C
-
-
-/* */
-/* Chip specific */
-/* */
-#define CHIP_BONDING_IDENTIFIER(_value) (((_value)>>22)&0x3)
-#define CHIP_BONDING_92C_1T2R 0x1
-#define CHIP_BONDING_88C_USB_MCARD 0x2
-#define CHIP_BONDING_88C_USB_HP 0x1
-
-#include "HalVerDef.h"
-#include "hal_com.h"
-
-/* */
-/* Channel Plan */
-/* */
-enum ChannelPlan
-{
- CHPL_FCC = 0,
- CHPL_IC = 1,
- CHPL_ETSI = 2,
- CHPL_SPAIN = 3,
- CHPL_FRANCE = 4,
- CHPL_MKK = 5,
- CHPL_MKK1 = 6,
- CHPL_ISRAEL = 7,
- CHPL_TELEC = 8,
- CHPL_GLOBAL = 9,
- CHPL_WORLD = 10,
-};
-
-#define EFUSE_REAL_CONTENT_LEN 512
-#define EFUSE_MAP_LEN 128
-#define EFUSE_MAX_SECTION 16
-#define EFUSE_IC_ID_OFFSET 506 /* For some inferiority IC purpose. added by Roger, 2009.09.02. */
-#define AVAILABLE_EFUSE_ADDR(addr) (addr < EFUSE_REAL_CONTENT_LEN)
-/* */
-/* <Roger_Notes> */
-/* To prevent out of boundary programming case, */
-/* leave 1byte and program full section */
-/* 9bytes + 1byt + 5bytes and pre 1byte. */
-/* For worst case: */
-/* | 1byte|----8bytes----|1byte|--5bytes--| */
-/* | | Reserved(14bytes) | */
-/* */
-
-/* PG data exclude header, dummy 6 bytes from CP test and reserved 1byte. */
-#define EFUSE_OOB_PROTECT_BYTES 15
-
-#define EFUSE_REAL_CONTENT_LEN_8723A 512
-#define EFUSE_MAP_LEN_8723A 256
-#define EFUSE_MAX_SECTION_8723A 32
-
-/* */
-/* EFUSE for BT definition */
-/* */
-#define EFUSE_BT_REAL_BANK_CONTENT_LEN 512
-#define EFUSE_BT_REAL_CONTENT_LEN 1536 /* 512*3 */
-#define EFUSE_BT_MAP_LEN 1024 /* 1k bytes */
-#define EFUSE_BT_MAX_SECTION 128 /* 1024/8 */
-
-#define EFUSE_PROTECT_BYTES_BANK 16
-
-/* */
-/* <Roger_Notes> For RTL8723 WiFi/BT/GPS multi-function configuration. 2010.10.06. */
-/* */
-enum RT_MULTI_FUNC {
- RT_MULTI_FUNC_NONE = 0x00,
- RT_MULTI_FUNC_WIFI = 0x01,
- RT_MULTI_FUNC_BT = 0x02,
- RT_MULTI_FUNC_GPS = 0x04,
-};
-
-/* */
-/* <Roger_Notes> For RTL8723 WiFi PDn/GPIO polarity control configuration. 2010.10.08. */
-/* */
-enum RT_POLARITY_CTL {
- RT_POLARITY_LOW_ACT = 0,
- RT_POLARITY_HIGH_ACT = 1,
-};
-
-/* For RTL8723 regulator mode. by tynli. 2011.01.14. */
-enum RT_REGULATOR_MODE {
- RT_SWITCHING_REGULATOR = 0,
- RT_LDO_REGULATOR = 1,
-};
-
-/* Description: Determine the types of C2H events that are the same in driver and Fw. */
-/* Fisrt constructed by tynli. 2009.10.09. */
-enum {
- C2H_DBG = 0,
- C2H_TSF = 1,
- C2H_AP_RPT_RSP = 2,
- C2H_CCX_TX_RPT = 3, /* The FW notify the report of the specific tx packet. */
- C2H_BT_RSSI = 4,
- C2H_BT_OP_MODE = 5,
- C2H_EXT_RA_RPT = 6,
- C2H_HW_INFO_EXCH = 10,
- C2H_C2H_H2C_TEST = 11,
- C2H_BT_INFO = 12,
- C2H_BT_MP_INFO = 15,
- MAX_C2HEVENT
-};
-
-struct hal_data_8723a {
- struct hal_version VersionID;
- enum rt_customer_id CustomerID;
-
- u16 FirmwareVersion;
- u16 FirmwareVersionRev;
- u16 FirmwareSubVersion;
- u16 FirmwareSignature;
-
- /* current WIFI_PHY values */
- u32 ReceiveConfig;
- enum WIRELESS_MODE CurrentWirelessMode;
- enum ht_channel_width CurrentChannelBW;
- u8 CurrentChannel;
- u8 nCur40MhzPrimeSC;/* Control channel sub-carrier */
-
- u16 BasicRateSet;
-
- /* rf_ctrl */
- u8 rf_type;
- u8 NumTotalRFPath;
-
- u8 BoardType;
- u8 CrystalCap;
- /* */
- /* EEPROM setting. */
- /* */
- u8 EEPROMVersion;
- u8 EEPROMCustomerID;
- u8 EEPROMSubCustomerID;
- u8 EEPROMRegulatory;
- u8 EEPROMThermalMeter;
- u8 EEPROMBluetoothCoexist;
- u8 EEPROMBluetoothType;
- u8 EEPROMBluetoothAntNum;
- u8 EEPROMBluetoothAntIsolation;
- u8 EEPROMBluetoothRadioShared;
-
- u8 bTXPowerDataReadFromEEPORM;
- u8 bAPKThermalMeterIgnore;
-
- u8 bIQKInitialized;
- u8 bAntennaDetected;
-
- u8 TxPwrLevelCck[RF_PATH_MAX][CHANNEL_MAX_NUMBER];
- u8 TxPwrLevelHT40_1S[RF_PATH_MAX][CHANNEL_MAX_NUMBER]; /* For HT 40MHZ pwr */
- u8 TxPwrLevelHT40_2S[RF_PATH_MAX][CHANNEL_MAX_NUMBER]; /* For HT 40MHZ pwr */
- u8 TxPwrHt20Diff[RF_PATH_MAX][CHANNEL_MAX_NUMBER];/* HT 20<->40 Pwr diff */
- u8 TxPwrLegacyHtDiff[RF_PATH_MAX][CHANNEL_MAX_NUMBER];/* For HT<->legacy pwr diff */
- /* For power group */
- u8 PwrGroupHT20[RF_PATH_MAX][CHANNEL_MAX_NUMBER];
- u8 PwrGroupHT40[RF_PATH_MAX][CHANNEL_MAX_NUMBER];
-
- u8 LegacyHTTxPowerDiff;/* Legacy to HT rate power diff */
-
- /* Read/write are allow for following hardware information variables */
- u8 framesync;
- u32 framesyncC34;
- u8 framesyncMonitor;
- u8 pwrGroupCnt;
- u32 MCSTxPowerLevelOriginalOffset[7][16];
- u32 CCKTxPowerLevelOriginalOffset;
-
- u32 AntennaTxPath; /* Antenna path Tx */
- u32 AntennaRxPath; /* Antenna path Rx */
- u8 ExternalPA;
-
- u8 bLedOpenDrain; /* Support Open-drain arrangement for controlling the LED. Added by Roger, 2009.10.16. */
-
- u8 b1x1RecvCombine; /* for 1T1R receive combining */
-
- /* For EDCA Turbo mode */
-
- u32 AcParam_BE; /* Original parameter for BE, use for EDCA turbo. */
-
- /* vivi, for tx power tracking, 20080407 */
- /* u16 TSSI_13dBm; */
- /* u32 Pwr_Track; */
- /* The current Tx Power Level */
- u8 CurrentCckTxPwrIdx;
- u8 CurrentOfdm24GTxPwrIdx;
-
- struct bb_reg_define PHYRegDef[4]; /* Radio A/B/C/D */
-
- bool bRFPathRxEnable[4]; /* We support 4 RF path now. */
-
- u32 RfRegChnlVal[2];
-
- u8 bCckHighPower;
-
- /* RDG enable */
- bool bRDGEnable;
-
- /* for host message to fw */
- u8 LastHMEBoxNum;
-
- u8 RegTxPause;
- /* Beacon function related global variable. */
- u8 RegFwHwTxQCtrl;
- u8 RegReg542;
-
- struct dm_priv dmpriv;
- struct dm_odm_t odmpriv;
- struct sreset_priv srestpriv;
-
-#ifdef CONFIG_8723AU_BT_COEXIST
- u8 bBTMode;
- /* BT only. */
- struct bt_30info BtInfo;
- /* For bluetooth co-existance */
- struct bt_coexist_str bt_coexist;
-#endif
-
- u8 bDumpRxPkt;/* for debug */
- u8 FwRsvdPageStartOffset; /* 2010.06.23. Added by tynli. Reserve page start offset except beacon in TxQ. */
-
- /* 2010/08/09 MH Add CU power down mode. */
- u8 pwrdown;
-
- u8 OutEpQueueSel;
- u8 OutEpNumber;
-
- /* */
- /* Add For EEPROM Efuse switch and Efuse Shadow map Setting */
- /* */
- u8 EepromOrEfuse;
- u16 EfuseUsedBytes;
- u16 BTEfuseUsedBytes;
-
- /* Interrupt relatd register information. */
- u32 SysIntrStatus;
- u32 SysIntrMask;
-
- /* */
- /* 2011/02/23 MH Add for 8723 mylti function definition. The define should be moved to an */
- /* independent file in the future. */
- /* */
- /* 8723-----------------------------------------*/
- enum RT_MULTI_FUNC MultiFunc; /* For multi-function consideration. */
- enum RT_POLARITY_CTL PolarityCtl; /* For Wifi PDn Polarity control. */
- enum RT_REGULATOR_MODE RegulatorMode; /* switching regulator or LDO */
- /* 8723-----------------------------------------
- * 2011/02/23 MH Add for 8723 mylti function definition. The define should be moved to an */
- /* independent file in the future. */
-
- /* Interrupt related register information. */
- u32 IntArray[2];
- u32 IntrMask[2];
-};
-
-#define GET_HAL_DATA(__pAdapter) ((struct hal_data_8723a *)((__pAdapter)->HalData))
-#define GET_RF_TYPE(priv) (GET_HAL_DATA(priv)->rf_type)
-
-#define INCLUDE_MULTI_FUNC_BT(_Adapter) (GET_HAL_DATA(_Adapter)->MultiFunc & RT_MULTI_FUNC_BT)
-#define INCLUDE_MULTI_FUNC_GPS(_Adapter) (GET_HAL_DATA(_Adapter)->MultiFunc & RT_MULTI_FUNC_GPS)
-
-struct rxreport_8723a {
- u32 pktlen:14;
- u32 crc32:1;
- u32 icverr:1;
- u32 drvinfosize:4;
- u32 security:3;
- u32 qos:1;
- u32 shift:2;
- u32 physt:1;
- u32 swdec:1;
- u32 ls:1;
- u32 fs:1;
- u32 eor:1;
- u32 own:1;
-
- u32 macid:5;
- u32 tid:4;
- u32 hwrsvd:4;
- u32 amsdu:1;
- u32 paggr:1;
- u32 faggr:1;
- u32 a1fit:4;
- u32 a2fit:4;
- u32 pam:1;
- u32 pwr:1;
- u32 md:1;
- u32 mf:1;
- u32 type:2;
- u32 mc:1;
- u32 bc:1;
-
- u32 seq:12;
- u32 frag:4;
- u32 nextpktlen:14;
- u32 nextind:1;
- u32 rsvd0831:1;
-
- u32 rxmcs:6;
- u32 rxht:1;
- u32 gf:1;
- u32 splcp:1;
- u32 bw:1;
- u32 htc:1;
- u32 eosp:1;
- u32 bssidfit:2;
- u32 rsvd1214:16;
- u32 unicastwake:1;
- u32 magicwake:1;
-
- u32 pattern0match:1;
- u32 pattern1match:1;
- u32 pattern2match:1;
- u32 pattern3match:1;
- u32 pattern4match:1;
- u32 pattern5match:1;
- u32 pattern6match:1;
- u32 pattern7match:1;
- u32 pattern8match:1;
- u32 pattern9match:1;
- u32 patternamatch:1;
- u32 patternbmatch:1;
- u32 patterncmatch:1;
- u32 rsvd1613:19;
-
- u32 tsfl;
-
- u32 bassn:12;
- u32 bavld:1;
- u32 rsvd2413:19;
-};
-
-/* rtl8723a_hal_init.c */
-s32 rtl8723a_FirmwareDownload(struct rtw_adapter *padapter);
-void rtl8723a_FirmwareSelfReset(struct rtw_adapter *padapter);
-void rtl8723a_InitializeFirmwareVars(struct rtw_adapter *padapter);
-
-void rtl8723a_InitAntenna_Selection(struct rtw_adapter *padapter);
-void rtl8723a_DeinitAntenna_Selection(struct rtw_adapter *padapter);
-void rtl8723a_CheckAntenna_Selection(struct rtw_adapter *padapter);
-void rtl8723a_init_default_value(struct rtw_adapter *padapter);
-
-s32 InitLLTTable23a(struct rtw_adapter *padapter, u32 boundary);
-
-s32 CardDisableHWSM(struct rtw_adapter *padapter, u8 resetMCU);
-s32 CardDisableWithoutHWSM(struct rtw_adapter *padapter);
-
-/* EFuse */
-u8 GetEEPROMSize8723A(struct rtw_adapter *padapter);
-void Hal_InitPGData(struct rtw_adapter *padapter, u8 *PROMContent);
-void Hal_EfuseParseIDCode(struct rtw_adapter *padapter, u8 *hwinfo);
-void Hal_EfuseParsetxpowerinfo_8723A(struct rtw_adapter *padapter, u8 *PROMContent, bool AutoLoadFail);
-void Hal_EfuseParseBTCoexistInfo_8723A(struct rtw_adapter *padapter, u8 *hwinfo, bool AutoLoadFail);
-void Hal_EfuseParseEEPROMVer(struct rtw_adapter *padapter, u8 *hwinfo, bool AutoLoadFail);
-void rtl8723a_EfuseParseChnlPlan(struct rtw_adapter *padapter, u8 *hwinfo, bool AutoLoadFail);
-void Hal_EfuseParseCustomerID(struct rtw_adapter *padapter, u8 *hwinfo, bool AutoLoadFail);
-void Hal_EfuseParseAntennaDiversity(struct rtw_adapter *padapter, u8 *hwinfo, bool AutoLoadFail);
-void Hal_EfuseParseRateIndicationOption(struct rtw_adapter *padapter, u8 *hwinfo, bool AutoLoadFail);
-void Hal_EfuseParseXtal_8723A(struct rtw_adapter *pAdapter, u8 *hwinfo, u8 AutoLoadFail);
-void Hal_EfuseParseThermalMeter_8723A(struct rtw_adapter *padapter, u8 *hwinfo, bool AutoLoadFail);
-
-/* register */
-void SetBcnCtrlReg23a(struct rtw_adapter *padapter, u8 SetBits, u8 ClearBits);
-void rtl8723a_InitBeaconParameters(struct rtw_adapter *padapter);
-
-void rtl8723a_start_thread(struct rtw_adapter *padapter);
-void rtl8723a_stop_thread(struct rtw_adapter *padapter);
-
-bool c2h_id_filter_ccx_8723a(u8 id);
-int c2h_handler_8723a(struct rtw_adapter *padapter, struct c2h_evt_hdr *c2h_evt);
-
-void rtl8723a_read_adapter_info(struct rtw_adapter *Adapter);
-void rtl8723a_read_chip_version(struct rtw_adapter *padapter);
-void rtl8723a_notch_filter(struct rtw_adapter *adapter, bool enable);
-void rtl8723a_SetBeaconRelatedRegisters(struct rtw_adapter *padapter);
-void rtl8723a_SetHalODMVar(struct rtw_adapter *Adapter,
- enum hal_odm_variable eVariable,
- void *pValue1, bool bSet);
-void
-rtl8723a_readefuse(struct rtw_adapter *padapter,
- u8 efuseType, u16 _offset, u16 _size_byte, u8 *pbuf);
-u16 rtl8723a_EfuseGetCurrentSize_WiFi(struct rtw_adapter *padapter);
-u16 rtl8723a_EfuseGetCurrentSize_BT(struct rtw_adapter *padapter);
-void rtl8723a_update_ramask(struct rtw_adapter *padapter,
- u32 mac_id, u8 rssi_level);
-
-#endif
projects / deliverable / linux.git / blobdiff