spi, serial: move to dma_transfer_direction

[deliverable/linux.git] / drivers / tty / serial / amba-pl011.c

diff --git a/drivers/tty/serial/amba-pl011.c b/drivers/tty/serial/amba-pl011.c
index f5f6831b0a640671d9e91c3d3e17a4d682e35578..460ff7dbfd638fbc55c217d509551f8c85bc2ca5 100644 (file)
--- a/drivers/tty/serial/amba-pl011.c
+++ b/drivers/tty/serial/amba-pl011.c
@@ -268,7 +268,7 @@ static void pl011_dma_probe_initcall(struct uart_amba_port *uap)
        struct dma_slave_config tx_conf = {
                .dst_addr = uap->port.mapbase + UART01x_DR,
                .dst_addr_width = DMA_SLAVE_BUSWIDTH_1_BYTE,
-               .direction = DMA_TO_DEVICE,
+               .direction = DMA_MEM_TO_DEV,
                .dst_maxburst = uap->fifosize >> 1,
        };
        struct dma_chan *chan;
@@ -301,7 +301,7 @@ static void pl011_dma_probe_initcall(struct uart_amba_port *uap)
                struct dma_slave_config rx_conf = {
                        .src_addr = uap->port.mapbase + UART01x_DR,
                        .src_addr_width = DMA_SLAVE_BUSWIDTH_1_BYTE,
-                       .direction = DMA_FROM_DEVICE,
+                       .direction = DMA_DEV_TO_MEM,
                        .src_maxburst = uap->fifosize >> 1,
                };
 
@@ -480,7 +480,7 @@ static int pl011_dma_tx_refill(struct uart_amba_port *uap)
                return -EBUSY;
        }
 
-       desc = dma_dev->device_prep_slave_sg(chan, &dmatx->sg, 1, DMA_TO_DEVICE,
+       desc = dma_dev->device_prep_slave_sg(chan, &dmatx->sg, 1, DMA_MEM_TO_DEV,
                                             DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
        if (!desc) {
                dma_unmap_sg(dma_dev->dev, &dmatx->sg, 1, DMA_TO_DEVICE);
@@ -676,7 +676,7 @@ static int pl011_dma_rx_trigger_dma(struct uart_amba_port *uap)
                &uap->dmarx.sgbuf_b : &uap->dmarx.sgbuf_a;
        dma_dev = rxchan->device;
        desc = rxchan->device->device_prep_slave_sg(rxchan, &sgbuf->sg, 1,
-                                       DMA_FROM_DEVICE,
+                                       DMA_DEV_TO_MEM,
                                        DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
        /*
         * If the DMA engine is busy and cannot prepare a