* (micro)frame
* @xfer_buf: Pointer to current transfer buffer position
* @xfer_dma: DMA address of xfer_buf
- * @align_buf: In Buffer DMA mode this will be used if xfer_buf is not
- * DWORD aligned
* @xfer_len: Total number of bytes to transfer
* @xfer_count: Number of bytes transferred so far
* @start_pkt_count: Packet count at start of transfer
* @hc_list_entry: For linking to list of host channels
* @desc_list_addr: Current QH's descriptor list DMA address
* @desc_list_sz: Current QH's descriptor list size
+ * @split_order_list_entry: List entry for keeping track of the order of splits
*
* This structure represents the state of a single host channel when acting in
* host mode. It contains the data items needed to transfer packets to an
u8 *xfer_buf;
dma_addr_t xfer_dma;
- dma_addr_t align_buf;
u32 xfer_len;
u32 xfer_count;
u16 start_pkt_count;
struct list_head hc_list_entry;
dma_addr_t desc_list_addr;
u32 desc_list_sz;
+ struct list_head split_order_list_entry;
};
struct dwc2_hcd_pipe_info {
DWC2_TRANSACTION_ALL,
};
+/* The number of elements per LS bitmap (per port on multi_tt) */
+#define DWC2_ELEMENTS_PER_LS_BITMAP DIV_ROUND_UP(DWC2_LS_SCHEDULE_SLICES, \
+ BITS_PER_LONG)
+
+/**
+ * struct dwc2_tt - dwc2 data associated with a usb_tt
+ *
+ * @refcount: Number of Queue Heads (QHs) holding a reference.
+ * @usb_tt: Pointer back to the official usb_tt.
+ * @periodic_bitmaps: Bitmap for which parts of the 1ms frame are accounted
+ * for already. Each is DWC2_ELEMENTS_PER_LS_BITMAP
+ * elements (so sizeof(long) times that in bytes).
+ *
+ * This structure is stored in the hcpriv of the official usb_tt.
+ */
+struct dwc2_tt {
+ int refcount;
+ struct usb_tt *usb_tt;
+ unsigned long periodic_bitmaps[];
+};
+
+/**
+ * struct dwc2_hs_transfer_time - Info about a transfer on the high speed bus.
+ *
+ * @start_schedule_usecs: The start time on the main bus schedule. Note that
+ * the main bus schedule is tightly packed and this
+ * time should be interpreted as tightly packed (so
+ * uFrame 0 starts at 0 us, uFrame 1 starts at 100 us
+ * instead of 125 us).
+ * @duration_us: How long this transfer goes.
+ */
+
+struct dwc2_hs_transfer_time {
+ u32 start_schedule_us;
+ u16 duration_us;
+};
+
/**
* struct dwc2_qh - Software queue head structure
*
+ * @hsotg: The HCD state structure for the DWC OTG controller
* @ep_type: Endpoint type. One of the following values:
* - USB_ENDPOINT_XFER_CONTROL
* - USB_ENDPOINT_XFER_BULK
* @do_split: Full/low speed endpoint on high-speed hub requires split
* @td_first: Index of first activated isochronous transfer descriptor
* @td_last: Index of last activated isochronous transfer descriptor
- * @usecs: Bandwidth in microseconds per (micro)frame
- * @interval: Interval between transfers in (micro)frames
- * @sched_frame: (Micro)frame to initialize a periodic transfer.
- * The transfer executes in the following (micro)frame.
- * @frame_usecs: Internal variable used by the microframe scheduler
- * @start_split_frame: (Micro)frame at which last start split was initialized
+ * @host_us: Bandwidth in microseconds per transfer as seen by host
+ * @device_us: Bandwidth in microseconds per transfer as seen by device
+ * @host_interval: Interval between transfers as seen by the host. If
+ * the host is high speed and the device is low speed this
+ * will be 8 times device interval.
+ * @device_interval: Interval between transfers as seen by the device.
+ * interval.
+ * @next_active_frame: (Micro)frame _before_ we next need to put something on
+ * the bus. We'll move the qh to active here. If the
+ * host is in high speed mode this will be a uframe. If
+ * the host is in low speed mode this will be a full frame.
+ * @start_active_frame: If we are partway through a split transfer, this will be
+ * what next_active_frame was when we started. Otherwise
+ * it should always be the same as next_active_frame.
+ * @num_hs_transfers: Number of transfers in hs_transfers.
+ * Normally this is 1 but can be more than one for splits.
+ * Always >= 1 unless the host is in low/full speed mode.
+ * @hs_transfers: Transfers that are scheduled as seen by the high speed
+ * bus. Not used if host is in low or full speed mode (but
+ * note that it IS USED if the device is low or full speed
+ * as long as the HOST is in high speed mode).
+ * @ls_start_schedule_slice: Start time (in slices) on the low speed bus
+ * schedule that's being used by this device. This
+ * will be on the periodic_bitmap in a
+ * "struct dwc2_tt". Not used if this device is high
+ * speed. Note that this is in "schedule slice" which
+ * is tightly packed.
+ * @ls_duration_us: Duration on the low speed bus schedule.
* @ntd: Actual number of transfer descriptors in a list
- * @dw_align_buf: Used instead of original buffer if its physical address
- * is not dword-aligned
- * @dw_align_buf_size: Size of dw_align_buf
- * @dw_align_buf_dma: DMA address for dw_align_buf
* @qtd_list: List of QTDs for this QH
* @channel: Host channel currently processing transfers for this QH
* @qh_list_entry: Entry for QH in either the periodic or non-periodic
* @n_bytes: Xfer Bytes array. Each element corresponds to a transfer
* descriptor and indicates original XferSize value for the
* descriptor
+ * @unreserve_timer: Timer for releasing periodic reservation.
+ * @dwc2_tt: Pointer to our tt info (or NULL if no tt).
+ * @ttport: Port number within our tt.
* @tt_buffer_dirty True if clear_tt_buffer_complete is pending
+ * @unreserve_pending: True if we planned to unreserve but haven't yet.
+ * @schedule_low_speed: True if we have a low/full speed component (either the
+ * host is in low/full speed mode or do_split).
*
* A Queue Head (QH) holds the static characteristics of an endpoint and
* maintains a list of transfers (QTDs) for that endpoint. A QH structure may
* be entered in either the non-periodic or periodic schedule.
*/
struct dwc2_qh {
+ struct dwc2_hsotg *hsotg;
u8 ep_type;
u8 ep_is_in;
u16 maxp;
u8 do_split;
u8 td_first;
u8 td_last;
- u16 usecs;
- u16 interval;
- u16 sched_frame;
- u16 frame_usecs[8];
- u16 start_split_frame;
+ u16 host_us;
+ u16 device_us;
+ u16 host_interval;
+ u16 device_interval;
+ u16 next_active_frame;
+ u16 start_active_frame;
+ s16 num_hs_transfers;
+ struct dwc2_hs_transfer_time hs_transfers[DWC2_HS_SCHEDULE_UFRAMES];
+ u32 ls_start_schedule_slice;
u16 ntd;
- u8 *dw_align_buf;
- int dw_align_buf_size;
- dma_addr_t dw_align_buf_dma;
struct list_head qtd_list;
struct dwc2_host_chan *channel;
struct list_head qh_list_entry;
dma_addr_t desc_list_dma;
u32 desc_list_sz;
u32 *n_bytes;
+ struct timer_list unreserve_timer;
+ struct dwc2_tt *dwc_tt;
+ int ttport;
unsigned tt_buffer_dirty:1;
+ unsigned unreserve_pending:1;
+ unsigned schedule_low_speed:1;
};
/**
};
#endif
+u32 dwc2_calc_frame_interval(struct dwc2_hsotg *hsotg);
+
/* Gets the struct usb_hcd that contains a struct dwc2_hsotg */
static inline struct usb_hcd *dwc2_hsotg_to_hcd(struct dwc2_hsotg *hsotg)
{
dwc2_writel(mask, hsotg->regs + HCINTMSK(chnum));
}
+void dwc2_hc_cleanup(struct dwc2_hsotg *hsotg, struct dwc2_host_chan *chan);
+void dwc2_hc_halt(struct dwc2_hsotg *hsotg, struct dwc2_host_chan *chan,
+ enum dwc2_halt_status halt_status);
+void dwc2_hc_start_transfer_ddma(struct dwc2_hsotg *hsotg,
+ struct dwc2_host_chan *chan);
+
/*
* Reads HPRT0 in preparation to modify. It keeps the WC bits 0 so that if they
* are read as 1, they won't clear when written back.
/* Schedule Queue Functions */
/* Implemented in hcd_queue.c */
-extern void dwc2_hcd_init_usecs(struct dwc2_hsotg *hsotg);
extern struct dwc2_qh *dwc2_hcd_qh_create(struct dwc2_hsotg *hsotg,
struct dwc2_hcd_urb *urb,
gfp_t mem_flags);
return (frame + inc) & HFNUM_MAX_FRNUM;
}
+static inline u16 dwc2_frame_num_dec(u16 frame, u16 dec)
+{
+ return (frame + HFNUM_MAX_FRNUM + 1 - dec) & HFNUM_MAX_FRNUM;
+}
+
static inline u16 dwc2_full_frame_num(u16 frame)
{
return (frame & HFNUM_MAX_FRNUM) >> 3;
return 0;
}
- return qh->usecs;
+ return qh->host_us;
}
extern void dwc2_hcd_save_data_toggle(struct dwc2_hsotg *hsotg,
extern void dwc2_host_disconnect(struct dwc2_hsotg *hsotg);
extern void dwc2_host_hub_info(struct dwc2_hsotg *hsotg, void *context,
int *hub_addr, int *hub_port);
+extern struct dwc2_tt *dwc2_host_get_tt_info(struct dwc2_hsotg *hsotg,
+ void *context, gfp_t mem_flags,
+ int *ttport);
+
+extern void dwc2_host_put_tt_info(struct dwc2_hsotg *hsotg,
+ struct dwc2_tt *dwc_tt);
extern int dwc2_host_get_speed(struct dwc2_hsotg *hsotg, void *context);
extern void dwc2_host_complete(struct dwc2_hsotg *hsotg, struct dwc2_qtd *qtd,
int status);
_qtd_ = list_entry((_qh_)->qtd_list.next, struct dwc2_qtd, \
qtd_list_entry); \
if (usb_pipeint(_qtd_->urb->pipe) && \
- (_qh_)->start_split_frame != 0 && !_qtd_->complete_split) { \
+ (_qh_)->start_active_frame != 0 && !_qtd_->complete_split) { \
_hfnum_.d32 = dwc2_readl((_hcd_)->regs + HFNUM); \
switch (_hfnum_.b.frnum & 0x7) { \
case 7: \
projects / deliverable / linux.git / blobdiff