-2013-06-24 Roland McGrath <mcgrathr@google.com>
+2014-01-22 Michael Zolotukhin <michael.v.zolotukhin@gmail.com>
- * config/tc-arm.c (parse_reg_list): Use skip_past_char for '}',
- so it skips whitespace before it.
- (s_arm_unwind_save_mmxwr, s_arm_unwind_save_mmxwcg): Likewise.
+ PR gas/16489
+ * config/tc-i386.c (check_VecOperands): Add check for invalid
+ register set in AVX512 gathers.
- * config/tc-arm.c (arm_symbol_chars): Include '{' and '}'.
- (arm_reg_parse_multi): Skip whitespace first.
- (parse_reg_list): Likewise.
- (parse_vfp_reg_list): Likewise.
- (s_arm_unwind_save_mmxwcg): Likewise.
+2014-01-22 Alan Modra <amodra@gmail.com>
-2013-06-24 Nick Clifton <nickc@redhat.com>
+ * config/tc-tic4x.c (md_shortopts): s/CONST/const/.
- PR gas/15623
- * config/tc-arm.c (do_t_smc): Mark as ending an IT block.
+2014-01-21 DJ Delorie <dj@redhat.com>
-2013-06-23 Richard Sandiford <rdsandiford@googlemail.com>
+ * config/tc-rl78.c (require_end_of_expr): New.
+ (md_operand): Call it.
+ (rl78_cons_fix_new): Mark LO16, HI16, ahd HI8 internal relocations
+ as not overflowing.
- * config/tc-mips.c (mips_ip): Fix swapped bit numbers in comments.
+2014-01-17 Will Newton <will.newton@linaro.org>
-2013-06-23 Richard Sandiford <rdsandiford@googlemail.com>
+ * config/tc-arm.c (do_vfp_nsyn_cvt_fpv8): Set OP to 1
+ for the s32.f64 flavours of VCVT.
- * config/tc-mips.c: Assert that offsetT and valueT are at least
- 8 bytes in size.
- (GPR_SMIN, GPR_SMAX): New macros.
- (macro, mips_ip): Remove code for 4-byte valueT and offsetT.
+2014-01-14 Nick Clifton <nickc@redhat.com>
-2013-06-22 Richard Sandiford <rdsandiford@googlemail.com>
+ PR gas/16434
+ * config/tc-z80.c (wrong_match): Provide format string to
+ as_warn.
+ (parse_exp_not_indexed): Delete unused variable dummy.
+ (emit_byte): Delete unused variable fixp.
- * config/tc-mips.c: Remove OBJ_ELF, OBJ_MAYBE_ELF and IS_ELF
- conditions. Remove any code deselected by them.
- (s_mips_frame, s_mips_mask): Handle ECOFF_DEBUGGING case first.
+2014-01-08 H.J. Lu <hongjiu.lu@intel.com>
-2013-06-22 Richard Sandiford <rdsandiford@googlemail.com>
+ * config/tc-i386.c (regbnd): Removed.
+ (vec_disp8): Likewise.
- * NEWS: Note removal of ECOFF support.
- * doc/as.texinfo (--emulation): Update for the removal of MIPS ECOFF.
- * Makefile.am (TARG_ENV_HFILES): Remove config/te-lnews.h.
- (MULTI_CFILES): Remove config/e-mipsecoff.c.
- * Makefile.in: Regenerate.
- * configure.in: Remove MIPS ECOFF references.
- (mips-sony-bsd*, mips-*-bsd*, mips-*-lnews*-ecoff, mips-*-*-ecoff):
- Delete cases.
- (mips-*-irix5*-*, mips*-*-linux*-*, mips*-*-freebsd*)
- (mips*-*-kfreebsd*-gnu, mips-*-*-elf): Fold into...
- (mips-*-*): ...this single case.
- (mipsbecoff, mipslecoff, mipsecoff): Remove emulations. Expect
- MIPS emulations to be e-mipself*.
- * configure: Regenerate.
- * configure.tgt (mips-sony-bsd*, mips-*-ultrix*, mips-*-osf*)
- (mips-*-ecoff*, mips-*-pe*, mips-*-irix*, ips-*-lnews*, mips-*-riscos*)
- (mips-*-sysv*): Remove coff and ecoff cases.
- * as.c (mipsbecoff, mipslecoff, mipsecoff): Remove.
- * ecoff.c: Remove reference to MIPS ECOFF.
- * config/e-mipsecoff.c, config/te-lnews.h: Delete files.
- * config/tc-mips.c (ECOFF_LITTLE_FORMAT): Delete.
- (RDATA_SECTION_NAME, mips_target_form): Remove COFF and ECOFF cases.
- (mips_hi_fixup): Tweak comment.
- (append_insn): Require a howto.
- (mips_after_parse_args): Remove OBJ_MAYBE_ECOFF code.
+2014-01-08 H.J. Lu <hongjiu.lu@intel.com>
-2013-06-22 Richard Sandiford <rdsandiford@googlemail.com>
+ * as.c (parse_args): Update copyright year to 2014.
- * doc/as.texinfo: Use MIPS rather than @sc{mips} throughout.
- Use "CPU" instead of "cpu".
- * doc/c-mips.texi: Likewise.
- (MIPS Opts): Rename to MIPS Options.
- (MIPS option stack): Rename to MIPS Option Stack.
- (MIPS ASE instruction generation overrides): Rename to
- MIPS ASE Instruction Generation Overrides (for now).
- (MIPS floating-point): Rename to MIPS Floating-Point.
+2014-01-07 Tom Tromey <tromey@redhat.com>
-2013-06-22 Richard Sandiford <rdsandiford@googlemail.com>
+ * config/tc-tic30.c (debug): Avoid old VA_* compatibility
+ wrappers.
- * doc/c-mips.texi (MIPS Macros): New section.
- (MIPS Object): Replace with...
- (MIPS Small Data): ...this new section.
+2014-01-07 Tom Tromey <tromey@redhat.com>
-2013-06-22 Richard Sandiford <rdsandiford@googlemail.com>
+ * config/tc-microblaze.h (parse_cons_expression_microblaze): Don't
+ use PARAMS.
- * doc/c-mips.texi (MIPS symbol sizes): Move section further up file.
- Capitalize name. Use @kindex instead of @cindex for .set entries.
+2014-01-07 Tom Tromey <tromey@redhat.com>
-2013-06-22 Richard Sandiford <rdsandiford@googlemail.com>
+ * config/tc-xc16x.h: Don't use ANSI_PROTOTYPES.
- * doc/c-mips.texi (MIPS Stabs): Remove section.
+2013-01-07 Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
-2013-06-20 Richard Sandiford <rdsandiford@googlemail.com>
+ * config/tc-aarch64.c (aarch64_cpus): Add entry for "xgene-1"
- * config/tc-mips.c (ISA_SUPPORTS_SMARTMIPS, ISA_SUPPORTS_DSP_ASE)
- (ISA_SUPPORTS_DSP64_ASE, ISA_SUPPORTS_DSPR2_ASE, ISA_SUPPORTS_EVA_ASE)
- (ISA_SUPPORTS_MT_ASE, ISA_SUPPORTS_MCU_ASE, ISA_SUPPORTS_VIRT_ASE)
- (ISA_SUPPORTS_VIRT64_ASE): Delete.
- (mips_ase): New structure.
- (mips_ases): New table.
- (FP64_ASES): New macro.
- (mips_ase_groups): New array.
- (mips_isa_rev, mips_ase_mask, mips_check_isa_supports_ase)
- (mips_check_isa_supports_ases, mips_set_ase, mips_lookup_ase): New
- functions.
- (is_opcode_valid): Use mips_ases to get the 64-bit ASE flags.
- (md_parse_option): Use mips_ases and mips_set_ase instead of
- separate case statements for each ASE option.
- (mips_after_parse_args): Use FP64_ASES. Use
- mips_check_isa_supports_ases to check the ASEs against
- other options.
- (s_mipsset): Use mips_ases and mips_set_ase instead of
- separate if statements for each ASE option. Use
- mips_check_isa_supports_ases, even when a non-ASE option
- is specified.
-
-2013-06-19 Greta Yorsh <Greta.Yorsh@arm.com>
-
- * config/tc-arm.c (arm_cpus): Add support for Cortex-A12.
-
-2013-06-18 Richard Sandiford <rdsandiford@googlemail.com>
-
- * config/tc-mips.c (md_shortopts, options, md_longopts)
- (md_longopts_size): Move earlier in file.
-
-2013-06-18 Richard Sandiford <rdsandiford@googlemail.com>
-
- * config/tc-mips.c (mips_set_options): Replace separate "ase_*" fields
- with a single "ase" bitmask.
- (mips_opts): Update accordingly.
- (file_ase, file_ase_explicit): New variables.
- (file_ase_mips3d, file_ase_mdmx, file_ase_smartmips, file_ase_dsp)
- (file_ase_dspr2, file_ase_eva, file_ase_mt, file_ase_virt): Delete.
- (ISA_HAS_ROR): Adjust for mips_set_options change.
- (is_opcode_valid): Take the base ase mask directly from mips_opts.
- (mips_ip): Adjust for mips_set_options change.
- (md_parse_option): Likewise. Update file_ase_explicit.
- (mips_after_parse_args): Adjust for mips_set_options change.
- Use bitmask operations to select the default ASEs. Set file_ase
- rather than individual per-ASE variables.
- (s_mipsset): Adjust for mips_set_options change.
- (mips_elf_final_processing): Test file_ase rather than
- file_ase_mdmx. Remove commented-out code.
-
-2013-06-18 Richard Sandiford <rdsandiford@googlemail.com>
-
- * config/tc-mips.c (mips_cpu_info): Add an "ase" field.
- (MIPS_CPU_ASE_SMARTMIPS, MIPS_CPU_ASE_DSP, MIPS_CPU_ASE_MT)
- (MIPS_CPU_ASE_MIPS3D, MIPS_CPU_ASE_MDMX, MIPS_CPU_ASE_DSPR2)
- (MIPS_CPU_ASE_MCU, MIPS_CPU_ASE_VIRT, MIPS_CPU_ASE_EVA): Delete.
- (mips_after_parse_args): Use the new "ase" field to choose
- the default ASEs.
- (mips_cpu_info_table): Move ASEs from the "flags" field to the
- "ase" field.
-
-2013-06-18 Richard Earnshaw <rearnsha@arm.com>
-
- * config/tc-arm.c (symbol_preemptible): New function.
- (relax_branch): Use it.
-
-2013-06-17 Catherine Moore <clm@codesourcery.com>
- Maciej W. Rozycki <macro@codesourcery.com>
- Chao-Ying Fu <fu@mips.com>
-
- * config/tc-mips.c (mips_set_options): Add ase_eva.
- (mips_set_options mips_opts): Add ase_eva.
- (file_ase_eva): Declare.
- (ISA_SUPPORTS_EVA_ASE): Define.
- (IS_SEXT_9BIT_NUM): Define.
- (MIPS_CPU_ASE_EVA): Define.
- (is_opcode_valid): Add support for ase_eva.
- (macro_build): Likewise.
- (macro): Likewise.
- (validate_mips_insn): Likewise.
- (validate_micromips_insn): Likewise.
- (mips_ip): Likewise.
- (options): Add OPTION_EVA and OPTION_NO_EVA.
- (md_longopts): Add -meva and -mno-eva.
- (md_parse_option): Process new options.
- (mips_after_parse_args): Check for valid EVA combinations.
- (s_mipsset): Likewise.
-
-2013-06-14 Richard Sandiford <rsandifo@linux.vnet.ibm.com>
-
- * dwarf2dbg.h (dwarf2_move_insn): Declare.
- * dwarf2dbg.c (line_subseg): Add pmove_tail.
- (get_line_subseg): Add create_p argument. Initialize pmove_tail.
- (dwarf2_gen_line_info_1): Update call accordingly.
- (dwarf2_move_insn): New function.
- * config/tc-mips.c (append_insn): Use dwarf2_move_insn.
-
-2013-06-14 Richard Sandiford <rsandifo@linux.vnet.ibm.com>
-
- Revert:
-
- 2011-09-05 Richard Sandiford <rdsandiford@googlemail.com>
-
- PR gas/13024
- * dwarf2dbg.c (pending_lines, pending_lines_tail): New variables.
- (dwarf2_gen_line_info_1): Delete.
- (dwarf2_push_line, dwarf2_flush_pending_lines): New functions.
- (dwarf2_gen_line_info, dwarf2_emit_label): Use them.
- (dwarf2_consume_line_info): Call dwarf2_flush_pending_lines.
- (dwarf2_directive_loc): Push previous .locs instead of generating
- them immediately.
-
-2013-06-13 Chao-ying Fu <Chao-ying.Fu@imgtec.com>
-
- * config/tc-mips.c (ISA_SUPPORTS_VIRT_ASE): Support micromips.
- (ISA_SUPPORTS_VIRT64_ASE): Support 64-bit micromips.
-
-2013-06-13 Nick Clifton <nickc@redhat.com>
-
- PR gas/15602
- * config/tc-m68k.h (TC_CHECK_ADJUSTED_BROKEN_DOT_WORD): Define.
- * config/tc-m68k.c (tc_m68k_check_adjusted_broken_word): New
- function. Generates an error if the adjusted offset is out of a
- 16-bit range.
-
-2013-06-12 Sandra Loosemore <sandra@codesourcery.com>
-
- * config/tc-nios2.c (md_apply_fix): Mask constant
- BFD_RELOC_NIOS2_HIADJ16 value to 16 bits.
-
-2013-06-10 Maciej W. Rozycki <macro@codesourcery.com>
-
- * config/tc-mips.c (append_insn): Don't do branch relaxation for
- MIPS-3D instructions either.
- (md_convert_frag): Update the COPx branch mask accordingly.
-
- * config/tc-mips.c (md_show_usage): Document --[no-]relax-branch
- option.
- * doc/as.texinfo (Overview): Add --relax-branch and
- --no-relax-branch.
- * doc/c-mips.texi (MIPS Opts): Document --relax-branch and
- --no-relax-branch.
-
-2013-06-09 Sandra Loosemore <sandra@codesourcery.com>
-
- * config/tc-nios2.c (nios2_parse_args): Allow trap argument to
- omitted.
-
-2013-06-08 Catherine Moore <clm@codesourcery.com>
-
- * config/tc-mips.c (is_opcode_valid): Build ASE mask.
- (is_opcode_valid_16): Pass ase value to opcode_is_member.
- (append_insn): Change INSN_xxxx to ASE_xxxx.
-
-2013-06-01 George Thomas <george.thomas@atmel.com>
-
- * gas/config/tc-avr.c: Change ISA for devices with USB support to
- AVR_ISA_XMEGAU
-
-2013-05-31 H.J. Lu <hongjiu.lu@intel.com>
-
- * config/tc-i386.c (md_begin): Don't align text/data/bss sections
- for ELF.
-
-2013-05-31 Paul Brook <paul@codesourcery.com>
-
- gas/
- * config/tc-mips.c (s_ehword): New.
-
-2013-05-30 Paul Brook <paul@codesourcery.com>
-
- * config/tc-mips.c (md_apply_fix): Support BFD_RELOC_MIPS_EH.
-
-2013-05-29 Maciej W. Rozycki <macro@codesourcery.com>
-
- * write.c (resolve_reloc_expr_symbols): On REL targets don't
- convert relocs who have no relocatable field either. Rephrase
- the conditional so that the PC-relative check is only applied
- for REL targets.
-
-2013-05-28 Chao-ying Fu <Chao-ying.Fu@imgtec.com>
-
- * config/tc-mips.c (macro) <ld>: Don't use $zero for address
- calculation.
-
-2013-05-28 Yufeng Zhang <yufeng.zhang@arm.com>
-
- * config/tc-aarch64.c (reloc_table): Update to use
- BFD_RELOC_AARCH64_TLSDESC_ADR_PAGE21 instead of
- BFD_RELOC_AARCH64_TLSDESC_ADR_PAGE.
- (md_apply_fix): Likewise.
- (aarch64_force_relocation): Likewise.
-
-2013-05-28 Kyrylo Tkachov <kyrylo.tkachov@arm.com>
-
- * config/tc-arm.c (it_fsm_post_encode): Improve
- warning messages about deprecated IT block formats.
-
-2013-05-28 Marcus Shawcroft <marcus.shawcroft@arm.com>
-
- * config/tc-aarch64.c (md_apply_fix): Move value range checking
- inside fx_done condition.
-
-2013-05-22 Jürgen Urban <JuergenUrban@gmx.de>
-
- * config/tc-mips.c (macro): Handle M_LQC2_AB and M_SQC2_AB.
-
-2013-05-20 Peter Bergner <bergner@vnet.ibm.com>
-
- * config/tc-ppc.c (ppc_setup_opcodes): Use new_seg to fix error
- and clean up warning when using PRINT_OPCODE_TABLE.
-
-2013-05-20 Alan Modra <amodra@gmail.com>
-
- * config/tc-ppc.c (md_apply_fix): Hoist code common to insn
- and data fixups performing shift/high adjust/sign extension on
- fieldval. Sink fx_pcrel handling and checks. Use fixP->fx_size
- when writing data fixups rather than recalculating size.
-
-2013-05-16 Jan-Benedict Glaw <jbglaw@lug-owl.de>
-
- * doc/c-msp430.texi: Fix typo.
-
-2013-05-16 Tristan Gingold <gingold@adacore.com>
-
- * config/tc-ppc.c (ppc_is_toc_sym): Symbols of class XMC_TC
- are also TOC symbols.
-
-2013-05-16 Nick Clifton <nickc@redhat.com>
-
- * config/tc-msp430.c: Make -mmcu recognise more part numbers.
- Add -mcpu command to specify core type.
- * doc/c-msp430.texi: Update documentation.
-
-2013-05-09 Andrew Pinski <apinski@cavium.com>
-
- * config/tc-mips.c (struct mips_set_options): New ase_virt field.
- (mips_opts): Update for the new field.
- (file_ase_virt): New variable.
- (ISA_SUPPORTS_VIRT_ASE): New macro.
- (ISA_SUPPORTS_VIRT64_ASE): New macro.
- (MIPS_CPU_ASE_VIRT): New define.
- (is_opcode_valid): Handle ase_virt.
- (macro_build): Handle "+J".
- (validate_mips_insn): Likewise.
- (mips_ip): Likewise.
- (enum options): Add OPTION_VIRT and OPTION_NO_VIRT.
- (md_longopts): Add mvirt and mnovirt
- (md_parse_option): Handle OPTION_VIRT and OPTION_NO_VIRT.
- (mips_after_parse_args): Handle ase_virt field.
- (s_mipsset): Handle "virt" and "novirt".
- (mips_elf_final_processing): Add a comment about virt ASE might need
- a new flag.
- (md_show_usage): Print out the usage of -mvirt and mno-virt options.
- * doc/c-mips.texi: Document -mvirt and -mno-virt.
- Document ".set virt" and ".set novirt".
-
-2013-05-09 Alan Modra <amodra@gmail.com>
-
- * config/tc-ppc.c (md_apply_fix): Sign extend fieldval under
- control of operand flag bits.
-
-2013-05-07 Alan Modra <amodra@gmail.com>
-
- * config/tc-ppc.c (PPC_VLE_SPLIT16A): Delete unused macro.
- (PPC_VLE_SPLIT16D, PPC_VLE_LO16A, PPC_VLE_LO16D): Likewise.
- (PPC_VLE_HI16A, PPC_VLE_HI16D): Likewise.
- (PPC_VLE_HA16A, PPC_VLE_HA16D): Likewise.
- (md_apply_fix): Set fx_no_overflow for assorted relocations.
- Shift and sign-extend fieldval for use by some VLE reloc
- operand->insert functions.
-
-2013-05-06 Paul Brook <paul@codesourcery.com>
- Catherine Moore <clm@codesourcery.com>
-
- * config/tc-mips.c (md_pcrel_from): Handle BFD_RELOC_32_PCREL.
- (limited_pcrel_reloc_p): Likewise.
- (md_apply_fix): Likewise.
- (tc_gen_reloc): Likewise.
-
-2013-05-06 Richard Sandiford <rdsandiford@googlemail.com>
-
- * config/tc-mips.c (limited_pcrel_reloc_p): New function.
- (mips_fix_adjustable): Adjust pc-relative check to use
- limited_pc_reloc_p.
-
-2013-05-02 Richard Sandiford <rdsandiford@googlemail.com>
-
- * config/tc-mips.c (mips_pseudo_table): Add stabd and stabs entries.
- (s_mips_stab): Do not restrict to stabn only.
-
-2013-05-02 Nick Clifton <nickc@redhat.com>
-
- * config/tc-msp430.c: Add support for the MSP430X architecture.
- Add code to insert a NOP instruction after any instruction that
- might change the interrupt state.
- Add support for the LARGE memory model.
- Add code to initialise the .MSP430.attributes section.
- * config/tc-msp430.h: Add support for the MSP430X architecture.
- * doc/c-msp430.texi: Document the new -mL and -mN command line
- options.
- * NEWS: Mention support for the MSP430X architecture.
-
-2013-05-01 Maciej W. Rozycki <macro@codesourcery.com>
-
- * configure.tgt: Replace alpha*-*-linuxecoff* pattern with
- alpha*-*-linux*ecoff*.
-
-2013-04-30 Chao-ying Fu <Chao-ying.Fu@imgtec.com>
-
- * config/tc-mips.c (mips_ip): Add sizelo.
- For "+C", "+G", and "+H", set sizelo and compare against it.
-
-2013-04-29 Nick Clifton <nickc@redhat.com>
-
- * as.c (Options): Add -gdwarf-sections.
- (parse_args): Likewise.
- * as.h (flag_dwarf_sections): Declare.
- * dwarf2dbg.c (emit_fixed_inc_line_addr): Skip section changes.
- (process_entries): When -gdwarf-sections is enabled generate
- fragmentary .debug_line sections.
- (out_debug_line): Set the section for the .debug_line section end
- symbol.
- * doc/as.texinfo: Document -gdwarf-sections.
- * NEWS: Mention -gdwarf-sections.
-
-2013-04-26 Christian Groessler <chris@groessler.org>
-
- * config/tc-z8k.c (md_parse_option): Set z8k_target_from_cmdline
- according to the target parameter. Don't call s_segm since s_segm
- calls bfd_set_arch_mach using stdoutput, but stdoutput isn't
- initialized yet.
- (md_begin): Call s_segm according to target parameter from command
- line.
-
-2013-04-25 Alan Modra <amodra@gmail.com>
-
- * configure.in: Allow little-endian linux.
- * configure: Regenerate.
-
-2013-04-24 Sandra Loosemore <sandra@codesourcery.com>
-
- * config/tc-nios2.c (nios2_control_register_arg_p): Rename
- "fstatus" control register to "eccinj".
-
-2013-04-19 Kai Tietz <ktietz@redhat.com>
-
- * configure.tgt (i386-*-cygwin): Handle x86_64 cygwin.
-
-2013-04-15 Julian Brown <julian@codesourcery.com>
-
- * expr.c (add_to_result, subtract_from_result): Make global.
- * expr.h (add_to_result, subtract_from_result): Add prototypes.
- * config/tc-sh.c (sh_optimize_expr): Use add_to_result,
- subtract_from_result to handle extra bit of precision for .sleb128
- directive operands.
-
-2013-04-10 Julian Brown <julian@codesourcery.com>
-
- * read.c (convert_to_bignum): Add sign parameter. Use it
- instead of X_unsigned to determine sign of resulting bignum.
- (emit_expr): Pass extra argument to convert_to_bignum.
- (emit_leb128_expr): Use X_extrabit instead of X_unsigned. Pass
- X_extrabit to convert_to_bignum.
- (parse_bitfield_cons): Set X_extrabit.
- * expr.c (make_expr_symbol, expr_build_uconstant, operand):
- Initialise X_extrabit field as appropriate.
- (add_to_result): New.
- (subtract_from_result): New.
- (expr): Use above.
- * expr.h (expressionS): Add X_extrabit field.
-
-2013-04-10 Jan Beulich <jbeulich@suse.com>
-
- * gas/config/tc-arm.c (encode_arm_addr_mode_3): Only reject base
- register being PC when is_t or writeback, and use distinct
- diagnostic for the latter case.
-
-2013-04-10 Jan Beulich <jbeulich@suse.com>
-
- * gas/config/tc-arm.c (parse_operands): Re-write
- po_barrier_or_imm().
- (do_barrier): Remove bogus constraint().
- (do_t_barrier): Remove.
-
-2013-04-09 Joerg Wunsch <joerg.wunsch@atmel.com>
-
- * gas/config/tc-avr.c (mcu_types): Add ATmega64RFR2,
- ATmega644RFR2, ATmega128RFR2, ATmega1284RFR2, ATmega256RFR2,
- ATmega2564RFR2
- * gas/doc/c-avr.texi (-mmcu documentation): Likewise.
-
-2013-04-09 Jan Beulich <jbeulich@suse.com>
-
- * gas/config/tc-arm.c (do_vmrs): Accept all control registers.
- Use local variable Rt in more places.
- (do_vmsr): Accept all control registers.
-
-2013-04-09 Jan Beulich <jbeulich@suse.com>
-
- * gas/config/tc-arm.c (do_neon_mov): Fake an instruction suffix
- if there was none specified for moves between scalar and core
- register.
-
-2013-04-09 Jan Beulich <jbeulich@suse.com>
-
- * gas/config/tc-arm.c (do_neon_ldx_stx): Reject VSTn in the
- NEON_ALL_LANES case.
-
-2013-04-08 Jan Beulich <jbeulich@suse.com>
-
- * gas/config/tc-arm.c (do_neon_ldr_str): Correct disgnostics for
- PC-relative VSTR.
-
-2013-04-08 Jan Beulich <jbeulich@suse.com>
-
- * gas/config/tc-arm.c (reg_names): Convert duplicate SP_fiq
- entry to sp_fiq.
-
-2013-04-03 Alan Modra <amodra@gmail.com>
-
- * doc/as.texinfo: Add support to generate man options for h8300.
- * doc/c-h8300.texi: Likewise.
-
-2013-03-28 Ramana Radhakrishnan <ramana.radhakrishnan@arm.com>
-
- * config/tc-arm.c (arm_cpus): Add support for Cortex-A53 and
- Cortex-A57.
-
-2013-03-27 Alexis Deruelle <alexis.deruelle@gmail.com>
-
- PR binutils/15068
- * config/tc-tic6x.c (tic6x_try_encode): Add use of bitfields array.
-
-2013-03-26 Nick Clifton <nickc@redhat.com>
-
- PR gas/15295
- * listing.c (rebuffer_line): Rewrite to avoid seeking back to the
- start of the file each time.
-
- PR gas/15178
- * config/tc-sparc.h (ELF_TARGET_FORMAT): Set to elf32-sparc for
- FreeBSD targets.
-
-2013-03-26 Douglas B Rupp <rupp@gnat.com>
-
- * config/tc-ia64.c (emit_one_bundle): Move last_slot adjustment
- after fixup.
-
-2013-03-21 Will Newton <will.newton@linaro.org>
-
- * config/tc-arm.c (encode_thumb32_addr_mode): Emit an error for all
- pc-relative str instructions in Thumb mode.
-
-2013-03-21 Michael Schewe <michael.schewe@gmx.net>
-
- * config/tc-h8300.c (do_a_fix_imm): Add relaxation of mov
- @(disp:32,ERx) to mov @(disp:16,ERx) insns by new reloc
- R_H8_DISP32A16.
- * config/tc-h8300.h: Remove duplicated defines.
-
-2013-03-21 Senthil Kumar Selvaraj <senthil_kumar.selvaraj@atmel.com>
-
- PR gas/15282
- * tc-avr.c (mcu_has_3_byte_pc): New function.
- (tc_cfi_frame_initial_instructions): Call it to find return
- address size.
-
-2013-03-20 Alexis Deruelle <alexis.deruelle@gmail.com>
-
- PR gas/15095
- * config/tc-tic6x.c (tic6x_try_encode): Handle
- tic6x_coding_dreg_(msb|lsb) field coding types and use it to
- encode register pair numbers when required.
-
-2013-03-15 Will Newton <will.newton@linaro.org>
-
- * config/tc-arm.c (do_neon_ldr_str): Fix error check for PC register
- in vstr in Thumb mode for pre-ARMv7 cores.
-
-2013-03-14 Andreas Schwab <schwab@suse.de>
-
- * doc/c-arc.texi (ARC Directives): Revert last change and use
- @itemize instead of @table.
- * doc/c-arm.texi (ARM-Instruction-Set): Likewise.
-
-2013-03-14 Nick Clifton <nickc@redhat.com>
-
- PR gas/15273
- * config/tc-arm.c (do_co_reg): Do not call check_obsolete with a
- NULL message, instead just check ARM_CPU_IS_ANY directly.
-
-2013-03-14 Nick Clifton <nickc@redhat.com>
-
- PR gas/15212
- * doc/c-arc.texi (ARC Directives): Use @code instead of @bullet
- for table format.
- * doc/c-arm.texi (ARM-Instruction-Set): Likewise. Also add text
- to the @item directives.
- (ARM-Neon-Alignment): Move to correct place in the document.
- * doc/c-cr16.texi (CR16 Operand Qualifiers): Fix up table
- formatting.
- * doc/c-tic54x.texi (TIC54X-Subsyms): Correct use of
- @smallexample.
-
-2013-03-12 Sebastian Huber <sebastian.huber@embedded-brains.de>
-
- * config/tc-nios2.c (nios2_consume_arg): Delete 'k' case. Add 'o'
- case. Add default BAD_CASE to switch.
-
-2013-03-11 Sebastian Huber <sebastian.huber@embedded-brains.de>
-
- * config/tc-nios2.c (nios2_assemble_args_ds): New function.
- (nios2_arg_info_structs): Add "d,s" and "d,s,E" entries.
-
-2013-03-11 Kyrylo Tkachov <kyrylo.tkachov@arm.com>
-
- * config/tc-arm.c (crc_ext_armv8): New feature set.
- (UNPRED_REG): New macro.
- (do_crc32_1): New function.
- (do_crc32b, do_crc32h, do_crc32w, do_crc32cb,
- do_crc32ch, do_crc32cw): Likewise.
- (TUEc): New macro.
- (insns): Add entries for crc32 mnemonics.
- (arm_extensions): Add entry for crc.
-
-2013-03-08 Chung-Lin Tang <cltang@codesourcery.com>
-
- * write.h (struct fix): Add fx_dot_frag field.
- (dot_frag): Declare.
- * write.c (dot_frag): New variable.
- (fix_new_internal): Set fx_dot_frag field with dot_frag.
- (fixup_segment): Base calculation of fx_offset with fx_dot_frag.
- * expr.c (expr): Save value of frag_now in dot_frag when setting
- dot_value.
- * read.c (emit_expr): Likewise. Delete comments.
-
-2013-03-07 H.J. Lu <hongjiu.lu@intel.com>
-
- * config/tc-i386.c (flag_code_names): Removed.
- (i386_index_check): Rewrote.
-
-2013-03-05 Yufeng Zhang <yufeng.zhang@arm.com>
-
- * config/tc-aarch64.c (aarch64_imm_float_p): Rename 'e' to 'pattern';
- add comment.
- (aarch64_double_precision_fmovable): New function.
- (parse_aarch64_imm_float): Add parameter 'dp_p'; call the new
- function; handle hexadecimal representation of IEEE754 encoding.
- (parse_operands): Update the call to parse_aarch64_imm_float.
-
-2013-02-28 H.J. Lu <hongjiu.lu@intel.com>
-
- * config/tc-i386.c (_i386_insn): Replace have_hle with hle_prefix.
- (check_hle): Updated.
- (md_assemble): Likewise.
- (parse_insn): Likewise.
-
-2013-02-28 H.J. Lu <hongjiu.lu@intel.com>
-
- * config/tc-i386.c (_i386_insn): Add rep_prefix.
- (md_assemble): Check if REP prefix is OK.
- (parse_insn): Remove expecting_string_instruction. Set
- i.rep_prefix.
-
-2013-02-28 Yufeng Zhang <yufeng.zhang@arm.com>
-
- * config/tc-aarch64.c (aarch64_features): Add the 'crc' option.
-
-2013-02-28 Yufeng Zhang <yufeng.zhang@arm.com>
-
- * config/tc-aarch64.c (parse_sys_reg): Allow the full range of CRn
- for system registers.
-
-2013-02-27 DJ Delorie <dj@redhat.com>
-
- * config/tc-rl78.c (reloc_function): Add %code -> BFD_RELOC_RL78_CODE.
- (rl78_op): Handle %code().
- (rl78_cons_fix_new): Likewise, but ignore for 20-bit operands.
- (tc_gen_reloc): Likwise; convert to a computed reloc.
- (md_apply_fix): Likewise.
-
-2013-02-25 Kaushik Phatak <Kaushik.Phatak@kpitcummins.com>
-
- * config/rl78-parse.y: Fix encoding of DIVWU insn.
-
-2013-02-25 Terry Guo <terry.guo@arm.com>
-
- * config/tc-arm.c (arm_cpus): Add cortex-r7 entry.
- * doc/c-arm.texi: Add cortex-r7 and missing cortex-r5 to
- list of accepted CPUs.
-
-2013-02-19 H.J. Lu <hongjiu.lu@intel.com>
-
- PR gas/15159
- * config/tc-i386.c (cpu_arch): Add ".smap".
-
- * doc/c-i386.texi: Document smap.
-
-2013-02-18 Maciej W. Rozycki <macro@codesourcery.com>
-
- * config/tc-mips.c (s_cpload): Call mips_mark_labels and set
- mips_assembling_insn appropriately.
- (s_cpsetup, s_cprestore, s_cpreturn, s_cpadd): Likewise.
-
-2013-02-18 Maciej W. Rozycki <macro@codesourcery.com>
-
- * config/tc-mips.c (append_insn): Correct indentation, remove
- extraneous braces.
-
-2013-02-15 Kyrylo Tkachov <kyrylo.tkachov@arm.com>
-
- * config/tc-arm.c (do_neon_mov): Break on NS_NULL.
-
-2013-02-15 Sebastian Huber <sebastian.huber@embedded-brains.de>
-
- * configure.tgt: Add nios2-*-rtems*.
-
-2013-02-14 Yufeng Zhang <yufeng.zhang@arm.com>
-
- * config/tc-aarch64.c (md_begin): Change to check if 'name' is
- NULL.
-
-2013-02-09 Jürgen Urban <JuergenUrban@gmx.de>
-
- * config/tc-mips.c (CPU_HAS_LDC1_SDC1): New macro.
- (macro): Use it. Assert that trunc.w.s is not used for r5900.
-
-2013-02-08 Yi-Hsiu, Hsu <ahsu@marvell.com>
-
- * gas/config/tc-arm.c (arm_cpus): Add support for mcpu=marvell-pj4
- core.
-
-2013-02-06 Sandra Loosemore <sandra@codesourcery.com>
- Andrew Jenner <andrew@codesourcery.com>
-
- Based on patches from Altera Corporation.
-
- * Makefile.am (TARGET_CPU_CFILES): Add config/tc-nios2.c.
- (TARGET_CPU_HFILES): Add config/tc-nios2.h.
- * Makefile.in: Regenerated.
- * configure.tgt: Add case for nios2*-linux*.
- * config/obj-elf.c: Conditionally include elf/nios2.h.
- * config/tc-nios2.c: New file.
- * config/tc-nios2.h: New file.
- * doc/Makefile.am (CPU_DOCS): Add c-nios2.texi.
- * doc/Makefile.in: Regenerated.
- * doc/all.texi: Set NIOSII.
- * doc/as.texinfo (Overview): Add Nios II options.
- (Machine Dependencies): Include c-nios2.texi.
- * doc/c-nios2.texi: New file.
- * NEWS: Note Altera Nios II support.
-
-2013-02-06 Alan Modra <amodra@gmail.com>
-
- PR gas/14255
- * config/tc-avr.h (TC_VALIDATE_FIX): Mark symbol used by reloc.
- Don't skip fixups with fx_subsy non-NULL.
- * config/tc-avr.c (tc_gen_reloc): Don't specially handle fixups
- with fx_subsy non-NULL.
-
-2013-02-04 H.J. Lu <hongjiu.lu@intel.com>
-
- * doc/c-metag.texi: Add "@c man" markers.
-
-2013-02-04 Alan Modra <amodra@gmail.com>
-
- * write.c (fixup_segment): Return void. Delete seg_reloc_count
- related code.
- (TC_ADJUST_RELOC_COUNT): Delete.
- * config/tc-i960.h (TC_ADJUST_RELOC_COUNT): Delete.
-
-2013-02-04 Alan Modra <amodra@gmail.com>
-
- * po/POTFILES.in: Regenerate.
-
-2013-01-30 Markos Chandras <markos.chandras@imgtec.com>
-
- * config/tc-metag.c: Make SWAP instruction less permissive with
- its operands.
-
-2013-01-29 DJ Delorie <dj@redhat.com>
-
- * config/tc-rl78.c (rl78_cons_fix_new): Handle user-specified
- relocs in .word/.etc statements.
-
-2013-01-29 Roland McGrath <mcgrathr@google.com>
-
- * config/tc-arm.c (md_apply_fix): Use as_bad_where for "bad
- immediate value for 8-bit offset" error so it shows line info.
-
-2013-01-24 Joseph Myers <joseph@codesourcery.com>
-
- * config/tc-ppc.c (md_assemble): Do not generate APUinfo sections
- for 64-bit output.
-
-2013-01-24 Nick Clifton <nickc@redhat.com>
-
- * config/tc-v850.c: Add support for e3v5 architecture.
- * doc/c-v850.texi: Mention new support.
-
-2013-01-23 Nick Clifton <nickc@redhat.com>
-
- PR gas/15039
- * config/tc-avr.c: Include dwarf2dbg.h.
-
-2013-01-18 H.J. Lu <hongjiu.lu@intel.com>
-
- * config/tc-i386.c (reloc): Support size relocation only for ELF.
- (tc_i386_fix_adjustable): Likewise.
- (lex_got): Likewise.
- (tc_gen_reloc): Likewise.
-
-2013-01-17 Yufeng Zhang <yufeng.zhang@arm.com>
-
- * config/tc-aarch64.c (output_operand_error_record): Change to output
- the out-of-range error message as value-expected message if there is
- only one single value in the expected range.
- (programmer_friendly_fixup): Remove the handling of 8-bit MOVI with
- LSL #0 as a programmer-friendly feature.
-
-2013-01-16 H.J. Lu <hongjiu.lu@intel.com>
-
- * config/tc-i386.c (reloc): Support BFD_RELOC_SIZE32.
- (tc_i386_fix_adjustable): Keep symbol for BFD_RELOC_32_SIZE and
- BFD_RELOC_64_SIZE relocations.
- (lex_got): Support "symbol@SIZE" and don't create GOT symbol
- for it.
- (tc_gen_reloc): Resolve BFD_RELOC_SIZE32 and BFD_RELOC_SIZE64
- relocations against local symbols.
-
-2013-01-16 Alan Modra <amodra@gmail.com>
-
- * config/tc-ppc.c (md_assemble <TE_PE>): Ignore line after
- finding some sort of toc syntax error, and break to avoid
- compiler uninit warning.
-
-2013-01-15 H.J. Lu <hongjiu.lu@intel.com>
-
- PR gas/15019
- * config/tc-i386.c (lex_got): Increment length by 1 if the
- relocation token is removed.
-
-2013-01-15 Nick Clifton <nickc@redhat.com>
-
- * config/tc-v850.c (md_assemble): Allow signed values for
- V850E_IMMEDIATE.
-
-2013-01-11 Sean Keys <skeys@ipdatasys.com>
-
- * config/tc-xgate.c (md_begin): Fix mistake made when going from
- git to cvs.
-
-2013-01-10 Peter Bergner <bergner@vnet.ibm.com>
-
- * doc/as.texinfo (Target PowerPC): Document -mpower8 and -mhtm.
- * doc/c-ppc.texi (PowerPC-Opts): Likewise.
- * config/tc-ppc.c (md_show_usage): Likewise.
- (ppc_handle_align): Handle power8's group ending nop.
-
-2013-01-10 Sean Keys <skeys@ipdatasys.com>
-
- * config/tc-xgate.c (md_begin): Fix the printing of opcodes so
- that the assember exits after the opcodes have been printed.
-
-2013-01-10 H.J. Lu <hongjiu.lu@intel.com>
-
- * app.c: Remove trailing white spaces.
- * as.c: Likewise.
- * as.h: Likewise.
- * cond.c: Likewise.
- * dw2gencfi.c: Likewise.
- * dwarf2dbg.h: Likewise.
- * ecoff.c: Likewise.
- * input-file.c: Likewise.
- * itbl-lex.h: Likewise.
- * output-file.c: Likewise.
- * read.c: Likewise.
- * sb.c: Likewise.
- * subsegs.c: Likewise.
- * symbols.c: Likewise.
- * write.c: Likewise.
- * config/tc-i386.c: Likewise.
- * doc/Makefile.am: Likewise.
- * doc/Makefile.in: Likewise.
- * doc/c-aarch64.texi: Likewise.
- * doc/c-alpha.texi: Likewise.
- * doc/c-arc.texi: Likewise.
- * doc/c-arm.texi: Likewise.
- * doc/c-avr.texi: Likewise.
- * doc/c-bfin.texi: Likewise.
- * doc/c-cr16.texi: Likewise.
- * doc/c-d10v.texi: Likewise.
- * doc/c-d30v.texi: Likewise.
- * doc/c-h8300.texi: Likewise.
- * doc/c-hppa.texi: Likewise.
- * doc/c-i370.texi: Likewise.
- * doc/c-i386.texi: Likewise.
- * doc/c-i860.texi: Likewise.
- * doc/c-m32c.texi: Likewise.
- * doc/c-m32r.texi: Likewise.
- * doc/c-m68hc11.texi: Likewise.
- * doc/c-m68k.texi: Likewise.
- * doc/c-microblaze.texi: Likewise.
- * doc/c-mips.texi: Likewise.
- * doc/c-msp430.texi: Likewise.
- * doc/c-mt.texi: Likewise.
- * doc/c-s390.texi: Likewise.
- * doc/c-score.texi: Likewise.
- * doc/c-sh.texi: Likewise.
- * doc/c-sh64.texi: Likewise.
- * doc/c-tic54x.texi: Likewise.
- * doc/c-tic6x.texi: Likewise.
- * doc/c-v850.texi: Likewise.
- * doc/c-xc16x.texi: Likewise.
- * doc/c-xgate.texi: Likewise.
- * doc/c-xtensa.texi: Likewise.
- * doc/c-z80.texi: Likewise.
- * doc/internals.texi: Likewise.
-
-2013-01-10 Roland McGrath <mcgrathr@google.com>
-
- * hash.c (hash_new_sized): Make it global.
- * hash.h: Declare it.
- * macro.c (define_macro): Use hash_new_sized instead of hash_new,
- pass a small size.
-
-2013-01-10 Will Newton <will.newton@imgtec.com>
-
- * Makefile.am: Add Meta.
- * Makefile.in: Regenerate.
- * config/tc-metag.c: New file.
- * config/tc-metag.h: New file.
- * configure.tgt: Add Meta.
- * doc/Makefile.am: Add Meta.
- * doc/Makefile.in: Regenerate.
- * doc/all.texi: Add Meta.
- * doc/as.texiinfo: Document Meta options.
- * doc/c-metag.texi: New file.
-
-2013-01-09 Steve Ellcey <sellcey@mips.com>
-
- * config/tc-i386.c (md_begin): Remove 'internal Error' from as_fatal
- calls.
- * config/tc-mips.c (internalError): Remove, replace with abort.
-
-2013-01-08 Yufeng Zhang <yufeng.zhang@arm.com>
-
- * config/tc-aarch64.c (parse_operands): Change to compare the result
- of function call 'parse_sys_reg' with 'PARSE_FAIL' instead of 'FALSE'.
-
-2013-01-07 Nick Clifton <nickc@redhat.com>
-
- PR gas/14887
- * config/tc-arm.c (skip_past_char): Skip whitespace before the
- anticipated character.
- * config/tc-arm.c (parse_address_main): Delete skip of whitespace
- here as it is no longer needed.
-
-2013-01-06 Andreas Schwab <schwab@linux-m68k.org>
-
- * doc/c-mips.texi (MIPS Opts): Fix use of @itemx.
- * doc/c-score.texi (SCORE-Opts): Likewise.
- * doc/c-tic54x.texi (TIC54X-Directives): Likewise.
-
-2013-01-04 Juergen Urban <JuergenUrban@gmx.de>
-
- * config/tc-mips.c: Add support for MIPS r5900.
- Add M_LQ_AB and M_SQ_AB to support large values for instructions
- lq and sq.
- (can_swap_branch_p, get_append_method): Detect some conditional
- short loops to fix a bug on the r5900 by NOP in the branch delay
- slot.
- (M_MUL): Support 3 operands in multu on r5900.
- (M_TRUNCWS): Support trunc.w.s on r5900 in MIPS ISA I.
- (s_mipsset): Force 32 bit floating point on r5900.
- (mips_ip): Check parameter range of instructions mfps and mtps on
- r5900.
- * configure.in: Detect CPU type when target string contains r5900
- (e.g. mips64r5900el-linux-gnu).
-
-2013-01-02 H.J. Lu <hongjiu.lu@intel.com>
-
- * as.c (parse_args): Update copyright year to 2013.
-
-2013-01-02 Yufeng Zhang <yufeng.zhang@arm.com>
-
- * config/tc-aarch64.c (aarch64_cpus): Add entries for "cortex-a53"
- and "cortex57".
-
-2013-01-02 Nick Clifton <nickc@redhat.com>
-
- PR gas/14987
- * config/tc-arm.c (parse_address_main): Skip whitespace before a
- closing bracket.
-
-For older changes see ChangeLog-2012
+For older changes see ChangeLog-2013
\f
-Copyright (C) 2013 Free Software Foundation, Inc.
+Copyright (C) 2014 Free Software Foundation, Inc.
Copying and distribution of this file, with or without modification,
are permitted in any medium without royalty provided the copyright