+2008-09-24 Richard Henderson <rth@redhat.com>
+
+ * dw2gencfi.c (DWARF2_ADDR_SIZE): Provide default.
+ (struct cfi_insn_data): Add ea member.
+ (CFI_val_encoded_addr, dot_cfi_val_encoded_addr): New.
+ (output_cfi_insn): Handle CFI_val_encoded_addr.
+ (select_cie_for_fde): Don't match CFI_val_encoded_addr.
+ * doc/as.texinfo (.cfi_val_encoded_addr): Document.
+
+2008-09-25 Alan Modra <amodra@bigpond.net.au>
+
+ PR 6913
+ * listing.c (print_options): Don't call fprintf without format string.
+
+2008-09-19 Alan Modra <amodra@bigpond.net.au>
+
+ * write.c (TC_FORCE_RELOCATION_SUB_LOCAL): Heed md_register_arithmetic.
+ (TC_VALIDATE_FIX_SUB): Likewise.
+ * config/tc-frv.h (TC_FORCE_RELOCATION_SUB_LOCAL): Likewise.
+ * config/tc-hppa.h (TC_FORCE_RELOCATION_SUB_LOCAL): Likewise.
+ * config/tc-mn10300.h (TC_VALIDATE_FIX_SUB): Likewise.
+ * config/tc-sh.h (TC_VALIDATE_FIX_SUB): Likewise.
+ (TC_FORCE_RELOCATION_SUB_LOCAL): Likewise.
+ * config/tc-sh64.h (TC_VALIDATE_FIX_SUB): Likewise.
+ * config/tc-xtensa.h (TC_VALIDATE_FIX_SUB): Likewise.
+ * doc/internals.texi (TC_FORCE_RELOCATION_SUB_ABS,
+ TC_FORCE_RELOCATION_SUB_LOCAL, TC_VALIDATE_FIX_SUB): Show new param.
+
+ * write.c (md_register_arithmetic): Define.
+ (fixup_segment): Adjust TC_FORCE_RELOCATION_SUB_ABS invocation.
+ Modify error message when registers involved.
+ (TC_FORCE_RELOCATION_SUB_ABS): Heed md_register_arithmetic.
+ * config/tc-sh.h (TC_FORCE_RELOCATION_SUB_ABS): Likewise.
+
+2008-09-15 Alan Modra <amodra@bigpond.net.au>
+
+ * write.c (install_reloc): Correct EMIT_SECTION_SYMBOLS test.
+
+2008-09-15 Alan Modra <amodra@bigpond.net.au>
+
+ * config/tc-frv.c (md_apply_fix): Use abs_section_sym for
+ relocs with no symbol.
+ * config/tc-mmix.c (md_assemble): Mark fake symbol on
+ BFD_RELOC_MMIX_BASE_PLUS_OFFSET as OK for use by relocs.
+ (mmix_md_end): Likewise mark mmix reg contents section symbol.
+
+2008-09-14 Chris Smith <chris@zxdesign.info>
+
+ * config/tc-z80.c: Opcode generation of ld a,(bc) and ld a,(de) was
+ broken, as the opcode of ld a,(de) was being emitted for both.
+
+2008-09-12 Sterling Augustine <sterling@tensilica.com>
+
+ * config/tc-xtensa.c (init_op_placement_info_table): Allow number of
+ operands equal to MAX_INSN_ARGS.
+
+2008-09-11 Jan Kratochvil <jan.kratochvil@redhat.com>
+
+ * configure.in: Call AC_SYS_LARGEFILE.
+ * config.in: Regenerate.
+ * configure: Regenerate.
+
+2008-09-09 Peter Bergner <bergner@vnet.ibm.com>
+
+ * config/tc-ppc.c (ppc_setup_opcodes): Simplify POWER4/NOPOWER4 test.
+ Remove POWER5 and POWER6 tests.
+
+2008-09-08 John David Anglin <dave.anglin@nrc-cnrc.gc.ca>
+
+ * config/tc-hppa.c (hppa_regname_to_dw2regnum): Add register name to
+ number support for 32-bit targets.
+
+2008-09-08 Tristan Gingold <gingold@adacore.com>
+
+ * NEWS: Add a marker for the 2.19 features.
+
+2008-09-07 John David Anglin <dave.anglin@nrc-cnrc.gc.ca>
+
+ * config/tc-hppa.h (DIFF_EXPR_OK): Define for SOM target. Revise
+ comment regarding use of difference expressions.
+ (TC_FORCE_RELOCATION_SUB_LOCAL): Define to 1.
+
+ * dw2gencfi.c (CFI_DIFF_EXPR_OK): Define if not defined.
+ (dot_cfi_personality): Use CFI_DIFF_EXPR_OK instead of DIFF_EXPR_OK.
+ (dot_cfi_lsda, output_cie, output_fde): Likewise.
+ * config/tc-hppa.h (CFI_DIFF_EXPR_OK): Define.
+
+2008-09-06 Richard Sandiford <rdsandiford@googlemail.com>
+
+ * config/tc-mips.h (DWARF2_FDE_RELOC_SIZE): Define.
+
+2008-09-03 Nick Clifton <nickc@redhat.com>
+
+ * config/tc-i386.c (pe_lcomm_internal): New function. Allows the
+ alignment field of the .lcomm directive to be optional.
+ (pe_lcomm): New function. Pass pe_lcomm_internal to
+ s_comm_internal.
+ (md_pseudo_table): Implement .lcomm directive for COFF based
+ targets.
+ * doc/c-i386.texi (i386-Directives): New node. Used to document
+ the .lcomm directive.
+
+2008-08-30 John David Anglin <dave.anglin@nrc-cnrc.gc.ca>
+
+ * config/tc-hppa.h: Don't define DWARF2_EH_FRAME_READ_ONLY on Linux
+ and NetBSD.
+
+2008-08-29 Eric B. Weddington <eric.weddington@atmel.com>
+
+ * config/tc-avr.c (mcu_types): Add atmega16u4.
+ * doc/c-avr.texi: Likewise.
+
+2008-08-28 H.J. Lu <hongjiu.lu@intel.com>
+
+ * config/tc-ia64.c (CR_IIB0): New.
+ (CR_IIB1): Likewise.
+ (cr): Add cr.iib0 and cr.iib1.
+ (specify_resource): Handle IA64_RS_CR_IIB and CR_IIB0/CR_IIB1.
+
+2008-08-28 Jan Beulich <jbeulich@novell.com>
+
+ * config/tc-i386.c (md_assemble): Force number of displacement
+ operands to zero when processing string instruction.
+ (i386_index_check): Special-case string instruction operands. Don't
+ fudge address prefix if there already was a memory operand. Fix
+ error message to correctly reflect the addressing mode used.
+ (i386_att_operand): Fix comment.
+ (i386_intel_operand): Snapshot, clear, and restore base and index
+ reg for each operand processed. Increment count of memory operands
+ later.
+
+2008-08-27 John David Anglin <dave.anglin@nrc-cnrc.gc.ca>
+
+ * config/tc-hppa.c (is_SB_relative): New macro.
+ (fix_new_hppa): Remove $segrel$ marker.
+ (cons_fix_new_hppa): Set reloc type R_PARISC_SEGREL32 if expression is
+ segment relative.
+ * config/tc-hppa.h (tc_frob_symbol): Check for $segrel$.
+
+2008-08-27 Jan Beulich <jbeulich@novell.com>
+
+ * config/tc-i386.c (check_string): Use register_prefix for error
+ message.
+ (process_operands): Likewise.
+
+2008-08-26 Mark Mitchell <mark@codesourcery.com>
+
+ * c-arm.texi: Add tutorial on ARM unwinding pseudo ops.
+
+2008-08-26 Jie Zhang <jie.zhang@analog.com>
+
+ * config/bfin-parse.y (check_macfunc_option): Fix instruction
+ mode checking.
+ (asm_1): Check mode for 16-bit multiply instructions.
+
+2008-08-24 Alan Modra <amodra@bigpond.net.au>
+
+ * configure.in: Update a number of obsolete autoconf macros.
+ * configure: Regenerate.
+ * aclocal.m4: Regenerate.
+
+2008-08-22 Nick Clifton <nickc@redhat.com>
+
+ * config/tc-mcore.c (md_assemble): Increase length of name array
+ to include terminating NUL.
+
+2008-08-22 Jie Zhang <jie.zhang@analog.com>
+
+ * config/bfin-lex.l (NUMBER): Protect special `.'.
+
+2008-08-22 Alan Modra <amodra@bigpond.net.au>
+
+ * symbols.c (symbol_clone): Ensure clones are not external.
+
+2008-08-22 Alan Modra <amodra@bigpond.net.au>
+
+ * config/tc-hppa.c (md_begin): Set BSF_KEEP for "dummy_symbol".
+
+2008-08-21 Richard Henderson <rth@redhat.com>
+
+ * dw2gencfi.c (DWARF2_FDE_RELOC_SIZE): New.
+ (output_cie, output_fde): Use it.
+ (DWARF2_EH_FRAME_READ_ONLY): New.
+ (cfi_finish): Use it.
+
+ * config/tc-hppa.h (DWARF2_FDE_RELOC_SIZE): Set to 8 for 64-bit.
+ (DWARF2_CIE_DATA_ALIGNMENT): Change sign.
+ (DWARF2_EH_FRAME_READ_ONLY): New.
+ * config/tc-hppa.c (tc_gen_reloc): Generate pc-relative relocations
+ from the results of DIFF_EXPR_OK manipulation.
+
+2008-08-21 Sterling Augustine <sterling@tensilica.com>
+
+ * config/xtensa-istack.h (MAX_INSN_ARGS): Increase to 64.
+
+2008-08-20 Bob Wilson <bob.wilson@acm.org>
+
+ * config/tc-xtensa.c (O_tlsfunc, O_tlsarg, O_tlscall): Define.
+ (O_tpoff, O_dtpoff): Define.
+ (suffix_relocs): Add entries for TLS suffixes.
+ (xtensa_elf_cons): Check for invalid use of TLS relocations.
+ (map_operator_to_reloc): Add is_literal parameter and use it to
+ control translating TLS instruction relocations to the corresponding
+ literal relocations.
+ (xg_valid_literal_expression): Allow TLS operators.
+ (xg_build_to_insn): Copy TLS operators from pseudo-instruction
+ operands to generated literals.
+ (xg_assemble_literal): Handle TLS operators. Update call to
+ map_operator_to_reloc.
+ (md_assemble): Handle CALLXn.TLS pseudo-instruction.
+ (md_apply_fix): Handle TLS relocations.
+ (emit_single_op): Handle TLS operators.
+ (convert_frag_immed): Update call to map_operator_to_reloc.
+ (vinsn_to_insnbuf): Emit relocations for TLS-related instructions.
+ * config/xtensa-istack.h (tinsn_struct): Add tls_reloc field.
+ * config/xtensa-relax.c (append_literal_op): Add src_op parameter
+ to initialize the op_data field of the BuildOp.
+ (build_transition): Use it here to record the source operand
+ corresponding to a generated literal.
+ * config/xtensa-relax.h (build_op): Comment op_data use for literals.
+
+2008-08-20 H.J. Lu <hongjiu.lu@intel.com>
+
+ AVX Programming Reference (August, 2008)
+ * config/tc-i386.c (CPU_FLAGS_AES_MATCH): New.
+ (CPU_FLAGS_AVX_MATCH): Likewise.
+ (CPU_FLAGS_32BIT_MATCH): Updated.
+ (cpu_flags_match): Likewise.
+
+2008-08-20 Alan Modra <amodra@bigpond.net.au>
+
+ PR 6848
+ * write.c (install_reloc): Check that reloc symbols have been
+ written.
+ (set_symtab): Mark symbols with BSF_KEEP.
+
+2008-08-18 H.J. Lu <hongjiu.lu@intel.com>
+
+ * config/tc-i386.c (i386_align_code): Fix a comment typo.
+
+2008-08-15 Alan Modra <amodra@bigpond.net.au>
+
+ PR 6526
+ * configure.in: Invoke AC_USE_SYSTEM_EXTENSIONS.
+ * Makefile.in: Regenerate.
+ * aclocal.m4: Regenerate.
+ * config.in: Regenerate.
+ * configure: Regenerate.
+ * doc/Makefile.in: Regenerate.
+
+2008-08-14 Alan Modra <amodra@bigpond.net.au>
+
+ * config/tc-tic4x.c (tic4x_operands_parse): Make static.
+
+2008-08-13 Ben Elliston <bje@au.ibm.com>
+
+ * doc/as.texinfo (Align): Document the PowerPC behaviour.
+
+2008-08-13 Alan Modra <amodra@bigpond.net.au>
+
+ * as.c, as.h, ecoff.c, hash.c, macro.c, symbols.c, config/obj-evax.c,
+ config/obj-som.c, config/tc-alpha.c, config/tc-arm.c, config/tc-bfin.c,
+ config/tc-bfin.h, config/tc-crx.c, config/tc-frv.c, config/tc-frv.h,
+ config/tc-hppa.h, config/tc-i386.c, config/tc-i860.c, config/tc-i960.h,
+ config/tc-ia64.c, config/tc-ia64.h, config/tc-m32c.c, config/tc-m32c.h,
+ config/tc-m68k.c, config/tc-maxq.c, config/tc-s390.c, config/tc-s390.h,
+ config/tc-sparc.c, config/tc-sparc.h, config/tc-spu.c, config/tc-spu.h,
+ config/tc-tic4x.c, config/tc-tic4x.h, config/tc-tic54x.c,
+ config/tc-tic54x.h, config/tc-vax.c, doc/internals.texi: Banish PARAMS
+ and PTR. Convert to ISO C. Delete unnecessary forward declarations.
+
+2008-08-12 Alan Modra <amodra@bigpond.net.au>
+
+ * config/tc-arm.c (s_unreq): Adjust hash_delete call.
+ * config/tc-ia64.c (dot_rot): Likewise.
+
+2008-08-11 Alan Modra <amodra@bigpond.net.au>
+
+ PR 6575
+ * hash.c: Expand PTR to void *.
+ (hash_delete): Add "freeme" parameter. Call obstack_free.
+ * hash.h: Expand PTR to void *.
+ (hash_delete): Update prototype.
+ * macro.c (macro_expand_body): hash_delete LOCALs from formal_hash.
+ * config/tc-tic54x.c (tic54x_remove_local_label): Update hash_delete
+ call.
+ (subsym_substitute): Likewise.
+ * doc/internals.texi (hash_delete): Update.
+
+2008-08-08 Anatoly Sokolov <aesok@post.ru>
+
+ * config/tc-avr.c (mcu_types): Add avr25, avr31, avr35, and avr51
+ architectures. Reorganize list to put mcu types in correct
+ architectures and to order list same as in GCC. Use new ISA
+ definitions in include/opcode/avr.h.
+ * doc/c-avr.texi: Add avr25, avr31, avr35, and avr51 architecture
+ descriptions. Reorganize descriptions to put mcu types in correct
+ architectures and to order lists same as in GCC.
+
+2008-08-08 Richard Sandiford <rdsandiford@googlemail.com>
+ Daniel Jacobowitz <dan@codesourcery.com>
+
+ * config/tc-mips.c (OPTION_CALL_NONPIC): New macro.
+ (OPTION_NON_SHARED, OPTION_XGOT, OPTION_MABI, OPTION_32)
+ (OPTION_N32, OPTION_64, OPTION_MDEBUG, OPTION_NO_MDEBUG)
+ (OPTION_PDR, OPTION_NO_PDR, OPTION_MVXWORKS_PIC): Bump by 1.
+ (md_longopts): Add -call_nonpic.
+ (md_parse_option): Handle OPTION_CALL_NONPIC.
+ (md_show_usage): Add -call_nonpic.
+
+2008-08-08 Sterling Augustine <sterling@tensilica.com>
+
+ * config/tc-xtensa.c (exclude_section_from_property_tables): New.
+ (xtensa_create_property_segments): Use it.
+ (xtensa_create_xproperty_segments): Likewise.
+
+2008-08-08 Alan Modra <amodra@bigpond.net.au>
+
+ * doc/internals.texi (DWARF2_FORMAT): Update for 2008-08-04 change.
+
+2008-08-06 Richard Sandiford <rdsandiford@googlemail.com>
+
+ * config/tc-mips.c (mips16_reloc_p, got16_reloc_p, hi16_reloc_p)
+ (lo16_reloc_p): New functions.
+ (reloc_needs_lo_p): Use hi16_reloc_p and got16_reloc_p to
+ generalize relocation checks.
+ (matching_lo_reloc): New function.
+ (fixup_has_matching_lo_p): Use it.
+ (mips16_mark_labels): Don't clobber a symbol's visibility.
+ (append_insn): Use hi16_reloc_p and lo16_reloc_p.
+ (mips16_ip): Handle BFD_RELOC_MIPS16_GOT16 and BFD_RELOC_MIPS16_CALL16.
+ (md_apply_fix): Likewise.
+ (mips16_percent_op): Add %got and %call16.
+ (mips_frob_file): Use got16_reloc_p to generalize relocation checks.
+ Use matching_lo_reloc.
+ (mips_force_relocation): Use hi16_reloc_p and lo16_reloc_p to
+ generalize relocation checks.
+ (mips_fix_adjustable): Use lo16_reloc_p to generalize relocation
+ checks.
+
+2008-08-06 DJ Delorie <dj@redhat.com>
+
+ * NEWS: Mention these changes.
+
+ * config/tc-h8300.h (H_TICK_HEX): Define.
+ * config/tc-h8300.c (OPTION_H_TICK_HEX): New.
+ (md_longopts): Add "-h-tick-hex".
+ (md_parse_option): Support it.
+ * doc/c-h8300.texi (H8/300 Options): Document it.
+ * doc/as.texinfo (Overview): Likewise.
+
+ * config/tc-sh.h (H_TICK_HEX): Define.
+ * config/tc-sh.c (OPTION_H_TICK_HEX): New.
+ (md_longopts): Add "-h-tick-hex".
+ (md_parse_option): Support it.
+ * doc/c-sh.texi (SH Options): Document it.
+ * doc/c-sh64.texi (SH64 Options): Document it.
+ * doc/as.texinfo (Overview): Likewise.
+
+2008-08-05 Alan Modra <amodra@bigpond.net.au>
+
+ PR gas/6656
+ * dwarf2dbg.c (dwarf2_directive_file): Disable gas generated
+ debug info if we see compiler generated debug info.
+ (dwarf2_directive_loc): Likewise. Remove redundant debug_type test.
+
+2008-08-04 Alan Modra <amodra@bigpond.net.au>
+
+ * dwarf2dbg.c: Remove superfluous forward function declarations.
+ (DWARF2_FORMAT): Add section arg.
+ (out_header): New function, split out from..
+ (out_debug_line): ..here.
+ (out_debug_aranges): Use out_header.
+ (out_debug_abbrev): Add info_seg and line_seg args. Use
+ DW_FORM_data8 (for DW_AT_stmt_list) if line_seg is 64-bit.
+ (out_debug_info): Use out_header. Output 8 byte DW_AT_stmt_list
+ if line_seg is 64-bit.
+ (dwarf2_finish): Adjust out_debug_abbrev call.
+ * config/tc-mips.h (DWARF2_FORMAT, mips_dwarf2_format): Add sec arg.
+ * config/tc-mips.c (mips_dwarf2_format): Likewise.
+
+2008-08-04 Alan Modra <amodra@bigpond.net.au>
+
+ * Makefile.am (POTFILES.in): Set LC_ALL=C.
+ * Makefile.in: Regenerate.
+ * po/POTFILES.in: Regenerate.
+
+2008-08-01 Peter Bergner <bergner@vnet.ibm.com>
+
+ * config/tc-ppc.c (parse_cpu): Rename altivec_or_spe to retain_flags.
+ Handle -mvsx and -mpower7.
+ (md_show_usage): Document -mpower7 and -mvsx.
+ * doc/as.texinfo (Target PowerPC): Document -mvsx.
+ * doc/c-ppc.texi (PowerPC-Opts): Document -mvsx and -mpower7.
+
+2008-07-31 Peter Bergner <bergner@vnet.ibm.com>
+
+ * config/tc-ppc.c (parse_cpu) <power6>: Accept Altivec instructions.
+ <cell>: Likewise.
+
+2008-07-30 Michael J. Eager <eager@eagercon.com>
+
+ * config/tc-ppc.c (parse_cpu): Separate handling of -m403/405.
+ (md_show_usage): Likewise.
+
+2008-07-30 Alan Modra <amodra@bigpond.net.au>
+
+ * messages.c, symbols.c, write.c: Silence gcc warnings.
+
+2008-07-28 Ineiev <ineiev@yahoo.co.uk>
+
+ * config/tc-i386.c (operand_type_check): Warning fix.
+
+2008-07-26 Michael Eager <eager@eagercon.com>
+
+ * doc/as.texinfo: Add description of single-precision attribute.
+
+2008-07-24 Jie Zhang <jie.zhang@analog.com>
+
+ * config/bfin-parse.y (asm_1): Error if plain symbol is used
+ as load/store offset.
+
+2008-07-22 Chao-ying Fu <fu@mips.com>
+
+ * config/tc-mips.c (mips_ip): Reset s to argsStart.
+
+2008-07-22 Jie Zhang <jie.zhang@analog.com>
+
+ * config/tc-bfin.c (bfin_gen_loop): Remove loop symbol.
+
+2008-07-21 DJ Delorie <dj@redhat.com>
+
+ * config/tc-h8300.c (fix_operand_size): Use the default size
+ specified by the .lbranch/.sbranch pseudos.
+
+2008-07-18 DJ Delorie <dj@redhat.com>
+
+ * config/tc-m32c.h (H_TICK_HEX): Define.
+ * config/tc-m32c.c (OPTION_H_TICK_HEX): Define.
+ (md_longopts): Add support for it.
+ (md_parse_option): Likewise.
+ * doc/as.texinfo (Overview): Add new m32c options.
+ * doc/c-m32c.texi (M32C-Modifiers): Likewise
+
+ * as.h: (enable_h_tick_hex): New.
+ * app.c (enable_h_tick_hex): New.
+ (LEX_IS_H): New.
+ (do_scrub_begin): Mark 'H' and 'h' as special if enable_h_tick_hex.
+ (do_scrub_chars): If enable_h_tick_hex and 'h', check for H'00
+ style hex constants and convert the input stream to 0x00 style.
+ (do_scrub_chars): If a 'X style character constant is found after
+ a symbol character (like you're or X'00), warn the user.
+
+2008-07-10 Richard Sandiford <rdsandiford@googlemail.com>
+
+ * config/tc-mips.c (mips16_mark_labels): Use ELF_ST_SET_MIPS16.
+ (mips_fix_adjustable): Likewise.
+ (mips_frob_file_after_relocs): Likewise.
+
+2008-07-08 Nathan Sidwell <nathan@codesourcery.com>
+
+ * config/tc-m68k.c (m68k_set_cpu, m68k_set_arch): Don't complain
+ about overriding an earlier setting.
+
+2008-07-07 Adam Nemet <anemet@caviumnetworks.com>
+
+ * config/tc-mips.c (NO_ISA_COP): New macro.
+ (COP_INSN): New macro.
+ (is_opcode_valid): Use them.
+ (macro) <ld_st>: Use them. Don't accept coprocessor load store
+ insns based on the ISA if CPU is NO_ISA_COP.
+ <copz>: Likewise for coprocessor operations.
+
+2008-07-07 Paul Brook <paul@codesourcery.com>
+
+ * config/tc-arm.c (arm_fix_adjustable): Don't adjust MOVW/MOVT
+ relocations.
+
+2008-07-07 Ralf Corsépius <ralf.corsepius@rtems.org>
+
+ * configure.tgt: Add bfin-*-rtems*.
+
+2008-07-04 Alan Modra <amodra@bigpond.net.au>
+
+ * config/tc-spu.c (md_apply_fix): Handle fully resolved
+ BFD_RELOC_32_PCREL, BFD_RELOC_SPU_HI16 and BFD_RELOC_SPU_LO16.
+
+2008-06-25 Peter Bergner <bergner@vnet.ibm.com>
+
+ * config/tc-ppc.c (parse_cpu): Handle -m464.
+ (md_show_usage): Likewise.
+
+2008-06-24 Eric B. Weddington <eric.weddington@atmel.com>
+
+ Add support for ATtiny13A.
+ * config/tc-avr.c (mcu_types): Add attiny13a.
+ * doc/c-avr.texi: Likewise.
+
+2008-06-24 Bob Wilson <bob.wilson@acm.org>
+ Alan Modra <amodra@bigpond.net.au>
+
+ * write.c (relax_segment <rs_org>): Include current stretch
+ value when calculating whether .org is backwards.
+
+2008-06-17 Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
+
+ * configure: Regenerate.
+
+2008-06-17 Nick Clifton <nickc@redhat.com>
+
+ * app.c (do_scrub_chars): Do not UNGET an EOF value.
+
+2008-06-16 Hans-Peter Nilsson <hp@bitrange.com>
+
+ PR gas/6607
+ * config/tc-mmix.c (s_loc): Assume "negative" addresses belong to
+ text_section. Do the "stepping backwards" test for text_section
+ using unsigned operands.
+
+2008-06-13 Peter Bergner <bergner@vnet.ibm.com>
+
+ * config/tc-ppc.c (ppc_cpu): Use ppc_cpu_t typedef.
+ (ppc_insert_operand): Likewise.
+ (ppc_machine): Likewise.
+ * config/tc-ppc.h: #include "opcode/ppc.h"
+ (struct _ppc_fix_extra <ppc_cpu>): Use ppc_cpu_t typedef.
+ (ppc_cpu): Update extern decl.
+
+2008-06-12 Adam Nemet <anemet@caviumnetworks.com>
+
+ * config/tc-mips.c (validate_mips_insn): Handle field descriptors
+ +x, +X, +p, +P, +s, +S.
+ (mips_ip): Likewise.
+
+ * config/tc-mips.c (validate_mips_insn): Handle field descriptor +Q.
+ (mips_ip): Likewise.
+ (macro_build): Likewise.
+ (CPU_HAS_SEQ): New macro.
+ (macro2) <M_SEQ_I, M_SNE_I>: Use it. Emit seq/sne and seqi/snei.
+
+2008-06-09 Eric B. Weddington <eric.weddington@atmel.com>
+
+ * config/tc-avr.c (mcu_types): Remove support for ATmega32HVB device.
+ * doc/c-avr.texi: Likewise.
+
+2008-06-04 Nick Clifton <nickc@redhat.com>
+
+ * app.c (do_scrub_chars): Do not UNGET an EOF value.
+
+2008-06-03 H.J. Lu <hongjiu.lu@intel.com>
+
+ * config/tc-i386.c (set_sse_check): New.
+ (md_pseudo_table): Add "sse_check".
+
+2008-06-03 Paul Brook <paul@codesourcery.com>
+
+ * config/tc-arm.c (do_t_rbit): Populate both rm fields.
+
+2008-05-30 Nick Clifton <nickc@redhat.com>
+
+ PR 5523
+ * config/tc-avr.c (avr_ldi_expression): Do not warn about unknown
+ relocs here.
+
+2008-05-29 Maxim Kuvyrkov <maxim@codesourcery.com>
+
+ * config/tc-mips.c (mips_cpu_info_table): Move records for
+ ST Loongson-2E/2F processors to a better place.
+
+2008-05-23 H.J. Lu <hongjiu.lu@intel.com>
+
+ PR gas/6518
+ * config/tc-i386.c (match_template): Report ambiguous operand
+ size, not invalid suffix when there is no match in Intel
+ syntax.
+
+2008-05-22 Paul Brook <paul@codesourcery.com>
+
+ * config/tc-arm.c (parse_cond): Covert to lowercase before matching.
+
+2008-05-21 I-Jui Sung <ijsung@gmail.com>
+
+ * config/tc-arm.c (arm_cpus): Add Faraday ARMv4 and ARMv5TE
+ compatible cores: fa526, fa626, fa626te, fa726te.
+ * doc/c-arm.texi (ARM Opts): Add -mcpu={fa526, fa626, fa626te,
+ fa726te} options.
+
+2008-05-14 Alan Modra <amodra@bigpond.net.au>
+
+ * Makefile.am: Run "make dep-am".
+ * Makefile.in: Regenerate.
+ * doc/Makefile.in: Regenerate.
+ * po/POTFILES.in: Regenerate.
+
+2008-05-09 Catherine Moore <clm@codesourcery.com>
+
+ * config/tc-mips.c (mips_frob_file): Don't match MIPS16 relocs
+ with non-MIPS16 relocs.
+
+2008-05-09 Chao-ying Fu <fu@mips.com>
+
+ * config/tc-mips.c (md_begin): Use strncmp to compare TARGET_OS, in
+ case that some characters append at the end of the name.
+ (mips_ip): Likewise.
+ (s_change_sec): Likewise.
+ (md_section_align): Likewise.
+
+2008-05-07 Bob Wilson <bob.wilson@acm.org>
+
+ * config/tc-xtensa.c (xtensa_create_property_segments): Use
+ xtensa_make_property_section instead of xtensa_get_property_section.
+ (xtensa_create_xproperty_segments): Likewise.
+
+2008-05-02 H.J. Lu <hongjiu.lu@intel.com>
+
+ * NEWS: Mention XSAVE, EPT and MOVBE.
+
+ * config/tc-i386.c (cpu_arch): Add .movbe and .ept.
+ (md_show_usage): Add .movbe and .ept.
+
+ * doc/c-i386.texi: Add movbe and ept to -march=. Document
+ .movbe and .ept.
+
+2008-04-29 David S. Miller <davem@davemloft.net>
+
+ * config/tc-sparc.c (v9a_asr_table): Fix order of softint entries.
+
+2008-04-28 Adam Nemet <anemet@caviumnetworks.com>
+
+ * config/tc-mips.c (file_mips_soft_float, file_mips_single_float):
+ New statics.
+ (OPTION_ELF_BASE): Make room for new option macros.
+ (OPTION_SOFT_FLOAT, OPTION_HARD_FLOAT, OPTION_SINGLE_FLOAT,
+ OPTION_DOUBLE_FLOAT): New option macros.
+ (md_longopts): Add msoft-float, mhard-float, msingle-float and
+ mdouble-float.
+ (md_parse_option): Handle OPTION_SINGLE_FLOAT,
+ OPTION_DOUBLE_FLOAT, OPTION_SOFT_FLOAT and OPTION_HARD_FLOAT.
+ (md_show_usage): Add -msoft-float, -mhard-float, -msingle-float
+ and -mdouble-float.
+ (struct mips_set_options): New fields soft_float and single_float.
+ (mips_opts): Initialized them. Add comment for each field
+ initializer.
+ (mips_after_parse_args): Set them based on file_mips_soft_float
+ and file_mips_single_float.
+ (s_mipsset): Add support for `.set softfloat', `.set hardfloat',
+ `.set singlefloat' and `.set doublefloat'.
+ (is_opcode_valid): New function to invoke OPCODE_IS_MEMBER.
+ Handle single-float and soft-float instructions here.
+ (macro_build, mips_ip): Use it instead of OPCODE_IS_MEMBER.
+ (is_opcode_valid_16): New function.
+ (mips16_ip): Use it instead of OPCODE_IS_MEMBER.
+ (macro) <M_LDC1_AB, M_SDC1_AB, M_L_DOB, M_L_DAB, M_S_DAB,
+ M_S_DOB>: Remove special-casing of r4650.
+ * doc/c-mips.texi (-march=): Add Octeon.
+ (MIPS Opts): Document -msoft-float and -mhard-float. Document
+ -msingle-float and -mdouble-float.
+ (MIPS floating-point): New section. Document `.set softfloat' and
+ `.set hardfloat'. Document `.set singlefloat' and `.set
+ doublefloat'.
+
2008-04-25 David S. Miller <davem@davemloft.net>
* config/tc-sparc.c: Accept 'softint_clear' and 'softint_set'
2008-04-04 Adrian Bunk <bunk@stusta.de>
Bob Wilson <bob.wilson@acm.org>
-
+
* config/tc-xtensa.c (xg_apply_fix_value): Check return code from
call to decode_reloc.
-
+
2008-04-04 H.J. Lu <hongjiu.lu@intel.com>
* NEWS: Mention XSAVE. Change CLMUL to PCLMUL.
* config/tc-bfin.c (bfin_start_line_hook): Localize the labels
generated for LOOP_BEGIN and LOOP_END instructions.
- (bfin_gen_loop): Likewise.
+ (bfin_gen_loop): Likewise.
2008-03-19 Andreas Krebbel <krebbel1@de.ibm.com>
* config/tc-hppa.c (is_same_frag): Delete.
2008-03-14 Sterling Augustine <sterling@tensilica.com>
-
+
* config/tc-xtensa.h (xtensa_relax_statesE): Update comment for
RELAX_LOOP_END_ADD_NOP.
-
+
2008-03-13 Evandro Menezes <evandro@yahoo.com>
PR gas/5895
2008-03-03 Sterling Augustine <sterling@tensilica.com>
Bob Wilson <bob.wilson@acm.org>
-
+
* config/tc-xtensa.c (xtensa_num_pipe_stages): New.
(md_begin): Initialize it.
(resources_conflict): Use it.
-
+
2008-03-03 Sterling Augustine <sterling@tensilica.com>
-
+
* config/tc-xtensa.h (RELAX_XTENSA_NONE): New.
-
+
2008-03-03 Denys Vlasenko <vda.linux@googlemail.com>
H.J. Lu <hongjiu.lu@intel.com>
(process_immext): New.
(md_assemble): Use it.
(update_imm): Use imm16 and imm32s.
- (i386_att_operand): Use inoutportreg.
+ (i386_att_operand): Use inoutportreg.
2008-02-14 H.J. Lu <hongjiu.lu@intel.com>
* config/tc-i386.c (set_cpu_arch, md_parse_option): Likewise.
2008-02-05 Sterling Augustine <sterling@tensilica.com>
-
+
* config/tc-xtensa.c (relax_frag_immed): Change internal consistency
checks into assertions. When relaxation produces an operation that
does not fit in the current FLIX instruction, make sure that the
operation is relaxed as needed to account for being placed following
the current instruction.
-
+
2008-02-04 H.J. Lu <hongjiu.lu@intel.com>
PR 5715
2008-01-25 Kai Tietz <kai.tietz@onevision.com>
- * read.c: (emit_expr): Correct for mingw use of printf size
+ * read.c: (emit_expr): Correct for mingw use of printf size
specifier.
2008-01-24 Bob Wilson <bob.wilson@acm.org>
-
+
* doc/c-xtensa.texi (Xtensa Syntax): Clarify handling of opcodes that
can only be encoded in FLIX instructions but are not specified as such.
(Xtensa Automatic Alignment): Remove obsolete comment about debugging
labels.
-
+
2008-01-24 H.J. Lu <hongjiu.lu@intel.com>
* NEWS: Mention new command line options for x86 targets.
* doc/c-i386.texi: Update -march= for ISA.
2008-01-18 Bob Wilson <bob.wilson@acm.org>
-
+
* config/tc-xtensa.c (xtensa_leb128): New function.
(md_pseudo_table): Use it for sleb128 and uleb128.
(is_leb128_expr): New internal flag.
(xtensa_symbol_new_hook): Check new flag.
-
+
2008-01-16 Eric B. Weddington <eric.weddington@atmel.com>
* config/tc-avr.c (mcu_types): Change opcode set for avr3,
at90usb82, at90usb162.
- * doc/c-avr.texi: Change architecture grouping for at90usb82,
+ * doc/c-avr.texi: Change architecture grouping for at90usb82,
at90usb162.
These changes support the new avr35 architecture group in gcc.
unwind personality function address.
2008-01-09 Bob Wilson <bob.wilson@acm.org>
-
+
* dwarf2dbg.c (out_sleb128): Delete.
(size_fixed_inc_line_addr, emit_fixed_inc_line_addr): New.
(out_fixed_inc_line_addr): Delete.
* read.h (emit_expr_fix): New prototype.
* read.c (emit_expr): Move code to emit_expr_fix and use it here.
(emit_expr_fix): New.
-
+
2008-01-09 H.J. Lu <hongjiu.lu@intel.com>
* config/tc-i386.c (match_template): Check register size
projects / deliverable / binutils-gdb.git / blobdiff