+2001-11-23 Jakub Jelinek <jakub@redhat.com>
+
+ * config/tc-alpha.c (tc_gen_reloc): Remove SEC_MERGE test.
+ * write.c (adjust_reloc_syms): Don't handle relocs against
+ SEC_MERGE section symbols specially.
+ (fixup_segment): Likewise.
+
+2001-11-21 Richard Sandiford <rsandifo@redhat.com>
+
+ * config/tc-mips.c (mips_need_elf_addend_fixup): New, extracted from...
+ (md_apply_fix3): ...here. Don't prevent the symbol value being
+ subtracted twice from GPREL addends.
+ (tc_gen_reloc): Add the symbol value to a GPREL addend if it was
+ subtracted by the previous function.
+
+2001-11-20 Nick Clifton <nickc@cambridge.redhat.com>
+
+ * config/tc-avr.c (md_apply_fix3): Fix typo introduced by
+ md_apply_fix3 change.
+
+2001-11-20 Ben Elliston <bje@redhat.com>
+
+ * config/tc-m88k.c (md_apply_fix3): Match local variable `val' to
+ usage after md_apply_fix3 cleanups.
+
+2001-11-19 Hans-Peter Nilsson <hp@bitrange.com>
+
+ * doc/c-mmix.texi: Use texinfo 4 features.
+ (MMIX-mmixal): Fix typo.
+
+2001-11-17 Hans-Peter Nilsson <hp@axis.com>
+
+ * config/tc-cris.c (md_apply_fix3): Cast value, not pointer, in
+ val assignment.
+
+2001-11-16 Alan Modra <amodra@bigpond.net.au>
+
+ * config/tc-m68k.c (md_apply_fix3): Change val back to a signed type.
+
+2001-11-15 H.J. Lu <hjl@gnu.org>
+
+ * config/tc-hppa.c (md_apply_fix3): Fix a typo.
+
+2001-11-15 H.J. Lu <hjl@gnu.org>
+
+ * config/tc-alpha.c (md_apply_fix3): Fix a typo.
+
+2001-11-15 Nick Clifton <nickc@cambridge.redhat.com>
+
+ * write.c (fixup_segment): Remove references to md_apply_fix and
+ TC_HANDLE_FX_DONE.
+ * cgen.c, config/obj-coff.c, config/tc-*.c: Update all occurances
+ of md_apply_fix to md_apply_fix3.
+ Make all md_apply_fix3 functions void.
+ * cgen.h, config/obj-coff.h, tc-*.h: Remove all definitions of
+ MD_APPLY_FIX3 and TC_HANDLE_FX_DONE.
+ * doc/internals.texi: Update references to md_apply_fix3.
+ * tc.h: Update prototype for md_apply_fix3.
+
+2001-11-15 Alan Modra <amodra@bigpond.net.au>
+
+ * config/tc-i386.h (md_end): Define.
+ (i386_elf_emit_arch_note): Declare.
+ (CpuUnknown): Delete.
+ * config/tc-i386.c (default_arch): Constify.
+ (smallest_imm_type): Remove CpuUnknown test.
+ (md_assemble): Don't bother checking cpu_arch_flags non-zero.
+ (i386_elf_emit_arch_note): New function.
+
+ * po/POTFILES.in: Regenerate.
+
+2001-11-15 Thiemo Seufer <seufer@csv.ica.uni-stuttgart.de>
+
+ * config/tc-mips.c (mips_ip): Re-allow %hi() op for non-ELF assembler.
+
+2001-11-15 Alan Modra <amodra@bigpond.net.au>
+
+ * frags.c (frag_grow): Revert last change.
+
+ * dwarf2dbg.c (get_frag_fix): Align last frag size.
+
+ * config/tc-ppc.c (ppc_insert_operand): Pass (ppc_cpu | ppc_size)
+ to operand->insert.
+ (md_assemble): Likewise.
+
+2001-11-12 Nick Clifton <nickc@cambridge.redhat.com>
+
+ * frags.c (frag_grow): Use frag_make_room() to grow the
+ obstack.
+
+2001-11-14 Nick Clifton <nickc@cambridge.redhat.com>
+
+ * config/tc-sparc.c (md_apply_fix3): Do not remove the symbol's
+ value from the addend for fixups against local symbols in
+ SEC_MERGE sections - it was not added in, in the first place.
+
+2001-11-11 Timothy Wall <twall@alum.mit.edu>
+
+ * write.c (relax_segment): Convert symbol address into an octet
+ offset prior to adding to the frag address, which is an octet
+ offset. Add comments to that effect.
+ * config/tc-tic54x.c: Fix bugs causing tests to fail.
+ * config/tc-tic54x.h: Ditch PARAMS macro.
+
+2001-11-13 Alan Modra <amodra@bigpond.net.au>
+
+ * config/obj-elf.c (obj_elf_version): Ensure terminating NUL is
+ put in note section. Use sizeof instead of hard-coded constants.
+
+2001-11-12 Thiemo Seufer <seufer@csv.ica.uni-stuttgart.de>
+
+ * config/tc-mips.c (support_64bit_objects): Define for OBJ_ELF only.
+ (md_longopts): Allow OPTION_MABI for ELF compilation only. RE-allow
+ OPTION_GP32, OPTION_GP64, OPTION_FP32 for non-ELF compilation.
+ Sort options a bit more logical.
+ (md_parse_option): Allow OPTION_32, OPTION_N32, OPTION_N64,
+ OPTION_MABI only for elf targets.
+
+2001-11-12 Thiemo Seufer <seufer@csv.ica.uni-stuttgart.de>
+
+ * config/tc-mips.c (set_at): Add cast needed for varargs.
+ (load_register): Likewise.
+ (macro): Likewise. Some code reformatting.
+ (macro2): Add cast needed for varargs.
+ (mips16_macro): Likewise.
+
+2001-11-12 Thiemo Seufer <seufer@csv.ica.uni-stuttgart.de>
+
+ * config/tc-mips.c (md_assemble): Remove superflous casts.
+ (append_insn): Likewise.
+ (mips16_macro_build): Likewise.
+ (macro): Likewise.
+ (mips16_ip): Likewise.
+ (s_cpload): Likewise.
+ (mips_relax_frag): Likewise.
+
+2001-11-12 Thiemo Seufer <seufer@csv.ica.uni-stuttgart.de>
+
+ * config/tc-mips.c (mips_abi_level): Move in front of
+ mips_set_options.
+ (mips_set_options): Add members gp32, fp32, abi.
+ (file_mips_gp32): New flag.
+ (file_mips_fp32): New flag.
+ (mips_opts): Initialize the new members.
+ (mips_gp32): Remove.
+ (mips_fp32): Remove.
+ (HAVE_32BIT_GPRS): Use the new values from mips_opts.
+ (HAVE_32BIT_FPRS): Likewise.
+ (HAVE_NEWABI): Likewise.
+ (HAVE_64BIT_OBJECTS): Likewise.
+ (md_begin): Likewise. Save default (file) values.
+ (md_parse_option): Use the new values from mips_opts.
+ (s_mipsset): Likewise. Fix logic to keep the ABI selection if
+ possible. Let .set mipsN work together with .set push/pop.
+ Enhance error messages.
+ (mips_elf_final_processing): Use file_mips_* for header processing.
+
+2001-11-09 Marek Michalkiewicz <marekm@amelek.gda.pl>
+
+ * config/tc-avr.c (mcu_types): Update for new devices.
+
+2001-11-09 Stephane Carrez <Stephane.Carrez@worldnet.fr>
+
+ * doc/Makefile.am (POD2MAN): Use 'GNU Development Tools' for
+ the page man title.
+ * doc/Makefile.in: Rebuild.
+ * doc/as.texinfo: Do not put man SEEALSO in document;
+ Use @command for commands, @option for options; Reorganize usage
+ to clearly identify target specific options.
+
+2001-11-08 Thiemo Seufer <seufer@csv.ica.uni-stuttgart.de>
+
+ * config/tc-mips.c (mips_force_relocation): Remove duplicate code.
+
+2001-11-06 Thiemo Seufer <seufer@csv.ica.uni-stuttgart.de>
+
+ * config/tc-mips.c (my_getSmallParser): Fix small parser bug.
+
+2001-11-05 Martin Schwidefsky <schwidefsky@de.ibm.com>
+
+ * config/tc-s390.c (tc_s390_force_relocation): Force all relocations
+ that need the global offset table.
+ (md_apply_fix3): Add code to undo opertions done in fixup_segment
+ triggered by TC_FORCE_RELOCATION.
+ * config/tc-s390.h (TC_FORCE_RELOCATION): Replace macro code with
+ a call to function tc_s390_force_relocation.
+ (TC_FIX_ADJUSTABLE): Define.
+
+2001-11-04 Chris Demetriou <cgd@broadcom.com>
+
+ * configure.in (mips-*-netbsd*): Add support for target.
+ * configure: Regenerate.
+
+2001-11-02 Nick Clifton <nickc@cambridge.redhat.com>
+
+ * configure.in (ALL_LINGUAS): Add 'fr'.
+ * configure: Regernate.
+ * po/fr.po: New file. Obtained from the translation project web
+ site.
+
+2001-11-02 Richard Earnshaw <rearnsha@arm.com>
+
+ * tc-arm.c: Re-arrange prototypes by architecture.
+ (insns): Re-arrange instructions by archtitecture. Pld instruction
+ is part of ARMv5E.
+ (tinsns): blx and bkpt are part of ARMv5T.
+ (do_fp_{ctrl,ldst,ldstm,dyadic,monadic,cmp,from_reg,to_reg}): Rename
+ to do_fpa_*. All callers changed.
+
+ * tc-arm.c (insns): Add two temporary instructions to handle
+ ldrd/strd.
+
+2001-11-01 Stephane Carrez <Stephane.Carrez@worldnet.fr>
+
+ * config/tc-m68hc11.c (build_jump_insn): Allocate worst case storage
+ for bra/bsr and use frag_variant(), this ensure that the possible
+ 16-bit BFD_RELOC_16 will be in the same frag.
+
+2001-10-31 Chris Demetriou <cgd@broadcom.com>
+
+ * config/tc-mips.c (HAVE_32BIT_ADDRESSES): If compiling embedded
+ PIC code, assume pointers the same size as GPRs.
+ (macro): In M_LA_AB handling for embedded PIC code, support
+ "la $treg,foo-bar($breg)". In load/store handling
+ (label ld_st) support "<op> $treg,<sym>-<local_sym>($breg)"
+ which is used by the compiler for switch statements.
+ In load/store double multi-instruction macro handling
+ (label ldd_std) add a comment that no special handling
+ is currently done for embedded PIC.
+ (mips_ip): In 'o' (16-bit offset) case, only accept 16
+ bit offsets.
+
+2001-10-31 Richard Earnshaw <rearnsha@arm.com>
+
+ General cleanup of feature definitions.
+ * tc-arm.c (ARM_EXT_LONGMUL, ARM_EXT_HALFWORD, ARM_EXT_THUMB): Delete.
+ (ARM_2UP, ARM_ALL, ARM_3UP, ARM_6UP): Delete.
+ (FPU_CORE, FPU_FPA10, FPA_FPA11, FPU_ALL, FPA_MEMMULTI): Delete.
+ (ARM_EXT_V{1,2,2S,3,3M,4,4T,5T,5ExP}): New defines.
+ (ARM_EXT_V{5,5E}): Synchronize with above.
+ (ARM_ARCH_V*): Define a complete set in terms of above features.
+ (ARM_{1,2,3,250,6,7,8,9,STRONG}): Define in terms of architecture.
+ (FPU_FPA_EXT_V[12]): Define.
+ (FPU_ARCH_FPE, FPU_ARCH_FPA): Define in terms of above.
+ (FPU_ANY): Define.
+ (FPU_DEFAULT): Default to FPA.
+ (CPU_DEFAULT): For XScale, this is now just ARM_ARCH_XSCALE; for
+ Thumb, this is now ARM_ARCH_V5T.
+ (insns): Rework for new feature defines.
+ (tinsns): Likewise.
+ (opcode_select, do_ldst, md_begin, md_parse_option): Likewise.
+
+2001-10-31 NIIBE Yutaka <gniibe@m17n.org>
+
+ * configure.in: Handle sh*eb-*-linux* and sh*-*-linux*.
+ * configure: Regenerate.
+ * Makefile.in: Regenerate.
+ * doc/c-sh.texi (SH Options): Added descriptions.
+
+2001-10-30 Hans-Peter Nilsson <hp@bitrange.com>
+
+ * configure.in: Update for MMIX port.
+ * Makefile.am: Ditto. Regenerate dependencies.
+ * Makefile.in: Regenerate.
+ * configure: Regenerate.
+ * config/tc-mmix.h, config/tc-mmix.c: New files.
+ * doc/Makefile.am (CPU_DOCS): Add c-mmix.texi
+ * doc/Makefile.in: Regenerate.
+ * doc/all.texi: @set MMIX.
+ * doc/as.texinfo: Ditto. Add MMIX gas manpage option overview.
+ Include c-mmix.texi.
+ * doc/c-mmix.texi: New file.
+
+2001-10-24 Chris Demetriou <cgd@broadcom.com>
+
+ * config/tc-mips.c (hilo_interlocks, cop_interlocks): Make
+ these evaluate to true if mips_arch indicates SB-1.
+
+2001-10-23 Alan Modra <amodra@bigpond.net.au>
+
+ * as.c (parse_args): Print the date as well for --version.
+
+2001-10-20 Chris Demetriou <cgd@broadcom.com>
+
+ * config/tc-mips.c (md_show_usage): Print "sb1" for Broadcom
+ SB-1 CPU for consistency.
+ (mips_cpu_info_table): Tweak comment about SB-1.
+
+2001-10-20 H.J. Lu <hjl@gnu.org>
+
+ * config/tc-arm.c (do_c_shift): Use ISDIGIT instead of isdigit.
+ (cirrus_parse_offset): Likewise.
+
+2001-10-19 Nick Clifton <nickc@cambridge.redhat.com>
+
+ * config/tc-arm.c: Restore line_comment_chars.
+
+2001-10-18 Nick Clifton <nickc@cambridge.redhat.com>
+
+ * config/tc-arm.c (comment_chars): Remove semi-colon accidentally
+ added to the list.
+
+2001-10-18 Hans-Peter Nilsson <hp@bitrange.com>
+
+ * write.c (fixup_segment): Handle fixups for SEC_MERGE sections as
+ for undefined symbols.
+
+2001-10-17 Chris Demetriou <cgd@broadcom.com>
+
+ * doc/as.texinfo (MIPS ISA options): Added accidentally
+ omitted "-mips64" option to list of options.
+
+2001-10-17 matthew green <mrg@redhat.com>
+
+ * config/tc-ppc.c (md_show_usage): Add missing -maltivec, -m7400,
+ -m7410, -m7450 and -m7455 options.
+
+2001-10-17 Alan Modra <amodra@bigpond.net.au>
+
+ * config/tc-ppc.c (PPC_HA, PPC_HIGHERA, PPC_HIGHESTA): Simplify.
+ (ppc_size): Select PPC_OPCODE_64 if 64 bit.
+ (md_begin): Don't set ppc_size here.
+ (ppc_target_format): Test ppc_size as well as BFD_DEFAULT_TARGET_SIZE.
+ (md_shortopts): Constify.
+ (md_longopts): Likewise.
+ (md_longopts_size): Likewise.
+ (ppc_elf_suffix): Only allow 64-bit relocs when ppc_size specifies
+ 64-bit opcodes.
+ (ppc_machine): Explain why this function is a nop.
+
+2001-10-17 Alan Modra <amodra@bigpond.net.au>
+
+ * bit_fix.h: Comment typo fix.
+ * config/tc-mips.c: Likewise.
+ * config/tc-sh.c: Likewise.
+ * config/tc-arc.c (arc_code_symbol): Remove unnecessary test.
+
+ * configure.in (MIPS_STABS_ELF): AC_DEFINE in only one place so
+ that autoheader doesn't duplicate config.in entries.
+ (DEFAULT_ARCH): Ditto.
+ * configure: Regenerate.
+ * config.in: Regenerate.
+
+2001-10-16 Alan Modra <amodra@bigpond.net.au>
+
+ From Andrew Pines <apines@cosmodog.com>
+ * config/tc-m68k.c (m68k_ip): Correct absolute jmp opcodes.
+
2001-10-16 NIIBE Yutaka <gniibe@m17n.org>,
Hans-Peter Nilsson <hp@bitrange.com>
2001-10-08 Tom Rix <trix@redhat.com>
- * config/tc-ppc (ppc_bf, ppc_biei) : Set first .bi lineno value to
+ * config/tc-ppc (ppc_bf, ppc_biei) : Set first .bi lineno value to
location of next .bf
* config/obj-coff.c (coff_frob_symbol) : XCOFF does not use endndx.
projects / deliverable / binutils-gdb.git / blobdiff