-2008-12-20 Hans-Peter Nilsson <hp@axis.com>
+2009-01-05 H.J. Lu <hongjiu.lu@intel.com>
- * config/tc-cris.c (cris_process_instruction): Handle
- BFD_RELOC_CRIS_32_IE, in the test whether the relocation fits.
- (get_3op_or_dip_prefix_op): Handle TLS/PIC decoration for the
- "double indirect" addressing mode.
- (cris_get_reloc_suffix): Add entry for :IE for BFD_RELOC_CRIS_32_IE.
- (cris_number_to_imm, tc_gen_reloc): Handle BFD_RELOC_CRIS_32_IE.
+ AVX Programming Reference (December, 2008)
+ * config/tc-i386.c (build_modrm_byte): Remove 5 operand instruction
+ support. Don't swap REG and NDS for FMA.
-2008-12-08 H.J. Lu <hongjiu.lu@intel.com>
+2009-01-02 Matthias Klose <doko@ubuntu.com>
- * config/tc-i386.c (build_modrm_byte): Remove an extra blank
- line.
+ * itbl-ops.c (itbl_disassemble): Don't rely on undefined sprintf
+ behaviour.
-2008-12-04 Ben Elliston <bje@au.ibm.com>
-
- * config/tc-ppc.c (parse_cpu): Remove booke64 support. Update
- usage strings.
- (ppc_setup_opcodes): Likewise, remove booke64 support.
- * doc/c-ppc.texi (PowerPC-Opts): Remove -mbooke32 and -mbooke64.
- * doc/as.texinfo (Overview): Likewise.
-
-2008-12-04 Nick Clifton <nickc@redhat.com>
-
- * doc/as.texinfo (Type): Reword description of STT_IFUNC type.
-
-2008-12-03 Nick Clifton <nickc@redhat.com>
-
- * config/obj-elf.c (obj_elf_type): Add support for STT_IFUNC type.
- * doc/as.texinfo: Document new feature.
- * NEWS: Mention new feature.
-
-2008-11-29 Kai Tietz <kai.tietz@onevision.com>
-
- * config/tc-i386.c (i386_target_format): For coff flavour in TE_PEP
- use "pe-i386" for 32-bit.
-
-2008-11-28 Jakub Jelinek <jakub@redhat.com>
-
- * Makefile.am (ehopt.o): Add struc-symbol.h.
- * Makefile.in: Regenerated.
- * ehopt.c: Include struc-symbol.h.
- (check_eh_frame): For very small O_constant DW_CFA_advance_loc4
- create correct DW_CFA_advance_loc. Handle O_subtract only
- for code alignment factor 1, otherwise handle O_divide or
- O_right_shift of O_subtract and O_constant.
- (eh_frame_estimate_size_before_relax): Always divide by ca.
- (eh_frame_convert_frag): Likewise.
-
-2008-11-28 John David Anglin <dave.anglin@nrc-cnrc.gc.ca>
-
- * dw2gencfi.c (output_cfi_insn): Scale DW_CFA_advance_loc1,
- DW_CFA_advance_loc2 and DW_CFA_advance_loc4 outputs.
-
-2008-11-28 Joshua Kinard <kumba@gentoo.org>
-
- * config/tc-mips.c (hilo_interlocks): Handle CPU_R14000, CPU_R16000.
- (mips_cpu_info_table): Add r14000, r16000.
- * doc/c-mips.texi: Add entries for 14000, 16000.
-
-2008-11-27 M R Swami Reddy <MR.Swami.Reddy@nsc.com>
-
- * config/tc-cr16.h (GLOBAL_OFFSET_TABLE_NAME): Defined
- * config/tc-cr16.c (md_pseudo_table): Add "4byte" directive to
- md_pseudo_table and accept @c prefix, same as long directive.
- (cr16_cons_fix_new): Initialize rtype to BFD_RELOC_UNUSED.
- (tc_gen_reloc): Declare a variable of type bfd_reloc_code_real_type
- and set it for GOT related relocations.
- (md_undefined_symbol): Defined
- (process_label_constant): Added checks for GOT/got and cGOT/cGOT
- prefixes with constant label and set the appropriate relocation type.
- * doc/c-cr16.texi (cr16-operand specifiers): Add got/GOT and cgot/cGOT.
-
-2008-11-26 DJ Delorie <dj@redhat.com>
-
- * config/tc-m32c.c (md_pseudo_table): Add support for .loc et al.
-
-2008-11-25 DJ Delorie <dj@redhat.com>
-
- * config/tc-m32c.c (md_convert_frag): Fix ADJNZ reloc math.
-
-2008-11-21 Sterling Augustine <sterling@tensilica.com>
-
- * config/tc-xtensa.c (check_t1_t2_reads_and_writes): Call
- xtensa_state_is_shared_or to allow multiple opcodes within a
- single FLIX bundle to write to these special states.
-
-2008-11-19 Hans-Peter Nilsson <hp@axis.com>
-
- * config/tc-cris.c (cris_number_to_imm): Apply S_SET_THREAD_LOCAL
- on symbols in TLS relocs.
-
-2008-11-19 Nick Clifton <nickc@redhat.com>
-
- * doc/fdl.texi: Update to v1.3
- * doc/as.texinfo: Change license to v1.3.
-
-2008-11-18 Catherine Moore <clm@cm00re.com>
-
- * config/tc-arm.c (neon_type_mask): Renumber.
- (type_chk_of_el_type): Handle F_F16.
- (neon_cvt_flavour): Recognize half-precision conversions.
- (do_neon_cvt): New shapes NS_QD and
- NS_DQ. Encode half-precision conversions.
- (do_neon_cvtt): Encode the T bit.
- (asm_opcode_insns): vcvt, vcvtt support.
- (arm_option_cpu_value): Add neon-fp16 support.
-
-2008-11-17 Nick Clifton <nickc@redhat.com>
-
- * as.c (parse_args): Update copyright year.
-
-2008-11-14 Mat Hostetter <mat@lcs.mit.edu>
-
- * read.c (emit_expr): Grow frag before filling it so that
- dot_value remains valid.
-
-2008-11-14 Peter Jansen <pwjansen@yahoo.com>
-
- PR 7026
- * config/tc-arm.c: Ensure that all uses of as_bad have a
- formatting string.
-
-2008-11-12 Hans-Peter Nilsson <hp@axis.com>
-
- * config/tc-cris.c (cris_number_to_imm): Except for
- BFD_RELOC_NONE, always set contents. Where previously this was
- skipped, set contents to 0.
-
- PR gas/7025
- * input-scrub.c (input_scrub_include_sb): Make the position
- after the input have defined contents, a 0 character.
-
- * config/tc-cris.c (cris_relax_frag): Add missing case for
- ENCODE_RELAX (STATE_COND_BRANCH_PIC, STATE_DWORD).
-
- PR gas/7020
- * read.c (read_a_source_file): Rearrange evaluation order when
- looking for '=' to avoid conditional on undefined contents of
- input_line_pointer[1].
-
-2008-11-06 Adam Nemet <anemet@caviumnetworks.com>
-
- * config/tc-mips.c (COP_INSN): Change logic to always return false
- for FP instructions.
-
-2008-11-06 Chao-ying Fu <fu@mips.com>
-
- * config/tc-mips.c (validate_mips_insn): Add case '1'.
- (mips_ip): Add case '1' to process sync type.
-
-2008-11-06 Joel Sherrill <joel.sherrill@oarcorp.com>
-
- * configure.tgt: Add m32c-*-rtems* and m32r-*-rtems*.
-
-2008-11-04 Sterling Augustine <sterling@tensilica.com>
-
- * config/tc-xtensa.c (tinsn_check_arguments): Check for multiple
- writes to the same register.
-
-2008-11-04 Sterling Augustine <sterling@tensilica.com>
-
- * config/tc-xtensa.c (xtensa_j_opcode): New.
- (xg_instruction_matches_option_term): Handle "FREEREG" option.
- (xg_build_to_insn): Likewise. Update renamed tls_reloc reference.
- (md_begin): Initialize xtensa_j_opcode.
- (md_assemble): Update renamed tls_reloc reference. Handle "j.l".
- (xg_assemble_vliw_tokens): Save free_reg info in the frag.
- (tinsn_immed_from_frag): Get free_reg info back out of the frag.
- (vinsn_to_insnbuf): Update renamed tls_reloc references.
- Distinguish extra argument for "FREEREG" from extra TLS argument.
- * config/tc-xtensa.h (struct xtensa_frag_type): Add free_reg field.
- * config/xtensa-istack.h (struct tinsn_struct): Rename tls_reloc
- field to extra_arg.
- * config/xtensa-relax.c (widen_spec_list): Add rules to relax "j.l".
- (build_transition): Handle "FREEREG" operand.
- * config/xtensa-relax.h (enum op_type): Add OP_FREEREG.
-
-2008-10-31 Alan Modra <amodra@bigpond.net.au>
-
- * po/id.po: Update.
-
-2008-10-24 Maciej W. Rozycki <macro@linux-mips.org>
-
- * config/tc-mips.c (mips_cpu_info_table): Move the MIPS64r2
- comment so that Broadcom SB-1 cores are in the MIPS64 section.
-
-2008-10-21 Alan Modra <amodra@bigpond.net.au>
-
- * config/tc-bfin.c (gencode, allocate): Remove unnecessary cast.
- * config/tc-ns32k.c (bit_fix_new): Likewise.
- * config/tc-m68k.c (md_begin): Likewise.
- * hash.c (hash_insert, hash_jam): Likewise.
- * symbols.c (symbol_create, local_symbol_make): Likewise.
- * frags.c (frag_alloc): Likewise.
-
-2008-10-20 Jay Krell <jay.krell@cornell.edu>
-
- * config/bfin-parse.y: Use C style comments.
- * config/tc-bfin.c: Likewise.
- * config/tc-m68k.c: Likewise.
- * config/tc-mips.c: Likewise.
-
-2008-10-12 H.J. Lu <hongjiu.lu@intel.com>
-
- * config/tc-i386.c (processor_type): Moved to tc-i386.h.
- (cpu_arch_tune): Make it global.
- (cpu_arch_isa): Likewise.
- (cpu_arch_isa_flags): Likewise.
- (i386_align_code): Check fragP->tc_frag_data.isa,
- fragP->tc_frag_data.isa_flags and cpu_arch_tune instead of
- cpu_arch_isa, cpu_arch_isa_flags and cpu_arch_tune,
- respectively.
-
- * config/tc-i386.h (processor_type): Moved from tc-i386.c.
- (cpu_arch_tune): New.
- (cpu_arch_isa): Likewise.
- (cpu_arch_isa_flags): Likewise.
- (i386_tc_frag_data): Likewise.
- (TC_FRAG_TYPE): Likewise.
- (TC_FRAG_INIT): Likewise.
-
-2008-10-09 Bob Wilson <bob.wilson@acm.org>
-
- * doc/as.texinfo (Pseudo Ops): Swap order of Comm and CFI menu entries.
- (Altmacro, Comm, Loc, Loc_mark_labels, List, MRI, PopSection, Sleb128):
- Moved into alphabetical order.
-
-2008-10-09 Bob Wilson <bob.wilson@acm.org>
-
- * doc/as.texinfo (Dot): Expand no-space-dir conditional to include
- a complete sentence.
- (Pseudo Ops): Put conditionals around Skip and Space menu entries.
- (Line): Remove conditional declaration of Ln node and section here.
- Put aout-bout description inside the no-line-dir conditional.
- (Skip, Space): Use a separate conditional for each node.
-
-2008-10-09 Bob Wilson <bob.wilson@acm.org>
-
- * doc/as.texinfo (Pseudo Ops): Remove no-file-dir conditional around
- menu entry for File; remove version-specific .file operands from menu
- description. Replace "LNS directives" menu entry with new entries
- for "Loc" and "Loc_mark_labels".
- (LNS directives): Split into separate nodes for each directive.
- (Loc): New node for .loc directive. Mention that this directive
- is for DWARF2 and add a missing article.
- (Loc_mark_labels): Likewise for .loc_mark_labels.
- (File): Change this node to describe both the default version and
- the DWARF2 version of .file. Move the no-file-dir conditional to
- include only the default version.
-
-2008-10-09 Eric Botcazou <ebotcazou@adacore.com>
-
- * dw2gencfi.c (cfi_finish): Deal with md_fix_up_eh_frame.
- * config/tc-i386.h (md_fix_up_eh_frame): Define on Solaris.
- (i386_solaris_fix_up_eh_frame): Declare.
- * config/tc-i386.c (i386_solaris_fix_up_eh_frame): New function.
-
-2008-10-09 Nick Clifton <nickc@redhat.com>
-
- PR 6944
- * doc/as.texinfo (Dollar Local Labels): Correct description of
- dollar local labels to show that the colon suffix is still
- needed.
-
-2008-10-08 Nick Clifton <nickc@redhat.com>
-
- * configure.in (ALL_LINGUAS): Add "id".
- * configure: Regenerate.
- * po/id.po: New Indonesian translation.
-
-2008-10-07 H.J. Lu <hongjiu.lu@intel.com>
-
- * read.c (pseudo_set): Don't allow global register symbol only
- if TC_GLOBAL_REGISTER_SYMBOL_OK is undefined.
- * symbols.c (S_SET_EXTERNAL): Likewise.
-
- * config/tc-mmix.h (TC_GLOBAL_REGISTER_SYMBOL_OK): Defined.
-
- * doc/internals.texi: Document TC_GLOBAL_REGISTER_SYMBOL_OK.
-
-2008-10-06 Bob Wilson <bob.wilson@acm.org>
-
- * doc/as.texinfo (Local): New description of ELF .local directive.
-
-2008-10-06 Nick Clifton <nickc@redhat.com>
-
- PR 6926
- * read.c (get_line_sb): Renamed to get_non_macro_line_sb.
- (_find_end_of_line): Add extra parameter indicating if the line is
- inside a macro. If it is then do not allow the @ character to be
- treated as a line separator character.
- (read_a_source): Update use of _find_end_of_line.
- (find_end_of_line): Likewise.
- (s_irp): Update use of get_line_sb.
- (s_macro): Likewise.
- (do_repeat): Likewise.
- (get_line_sb): New function. Like the old version of get_line_sb
- except that it takes an extra parameter indicating whether the
- line is inside a macro.
- (get_macro_line_sb): New function.
-
-2008-10-04 Hans-Peter Nilsson <hp@axis.com>
-
- * config/tc-cris.c: Update all comments regarding explicit relocations
- to, besides PIC, also imply TLS or to say "relocation specifier" or
- similar.
- (RELOC_SUFFIX_CHAR): Rename from PIC_SUFFIX_CHAR. Change all callers.
- (cris_get_reloc_suffix): Rename from cris_get_pic_suffix. Change all
- callers. Also handle TLS relocs.
- (cris_get_specified_reloc_size): Rename from cris_get_pic_reloc_size.
- Change all callers. Also handle TLS relocs.
- (tls): New constant.
- (cris_process_instruction): Check for non-PIC TLS relocations and
- adjust message when emitting error message about relocation not
- fitting.
- (get_autoinc_prefix_or_indir_op): Also check for relocation suffix
- when tls is true.
- (get_3op_or_dip_prefix_op): Ditto.
- (cris_number_to_imm, tc_gen_reloc): Handle TLS relocs like PIC relocs.
-
-2008-10-03 Kazu Hirata <kazu@codesourcery.com>
-
- * listing.c (buffer_line): Open the source file with FOPEN_RB.
- Manually process line ends.
-
-2008-09-30 Wesley W. Terpstra <wesley@terpstra.ca>
- Nick Clifton <nickc@redhat.com>
-
- * config/tc-tic4x.c (tic4x_globl): Call S_SET_EXTERNAL as well as
- S_SET_STORAGE_CLASS.
-
-2008-09-30 Wesley W. Terpstra <wesley@terpstra.ca>
- Nick Clifton <nickc@redhat.com>
-
- * coffgen.c (coff_write_symbols): Check to see if a symbol's flags
- do not match it class and if necessary update the class.
- (null_error_handler): New function. Suppresses the generation of
- bfd error messages.
- * coff64-rs6000.c (bfd_xcoff_backend_data): Update comment.
-
-2008-09-30 Alan Modra <amodra@bigpond.net.au>
-
- * Makefile.am: Run "make dep-am".
- * Makefile.in: Regenerate.
-
-2008-09-29 Nick Clifton <nickc@redhat.com>
-
- * dw2gencfi.c (output_cfi_insn): Fix typo in invocation of
- tc_cfi_emit_pcrel_expr macro.
-
-2008-09-29 Peter O'Gorman <pogma@thewrittenword.com>
- Steve Ellcey <sje@cup.hp.com>
-
- * configure: Regenerate for new libtool.
- * aclocal.m4: Ditto.
- * Makefile.in: Ditto.
- * doc/Makefile.in: Ditto.
-
-2008-09-29 Nick Clifton <nickc@redhat.com>
-
- PR 6878
- * app.c (do_scrub_chars): Only issue warnings about tick
- characters detected in symbol strings if hex ticks are supported.
-
-2008-09-29 Nick Clifton <nickc@redhat.com>
-
- * dw2gencfi.c (output_cfi_insn): Fix typo in invocation of
- tc_cfi_emit_pcrel_expr macro.
-
-2008-09-28 Daniel Jacobowitz <dan@codesourcery.com>
-
- * NEWS: Mention .cfi_val_encoded_addr.
-
-2008-09-26 Eric Botcazou <ebotcazou@adacore.com>
-
- * Makefile.am (TARG_ENV_HFILES): Add config/te-solaris.h.
- * Makefile.in (TARG_ENV_HFILES): Likewise.
- * configure.tgt (Solaris targets): Set em=solaris.
- * config/te-solaris.h: New file.
-
-2008-09-26 Jie Zhang <jie.zhang@analog.com>
-
- * config/bfin-parse.y (asm_1): Fix reduce/reduce conflicts.
-
-2008-09-24 Richard Henderson <rth@redhat.com>
-
- * dw2gencfi.c (DWARF2_ADDR_SIZE): Provide default.
- (struct cfi_insn_data): Add ea member.
- (CFI_val_encoded_addr, dot_cfi_val_encoded_addr): New.
- (output_cfi_insn): Handle CFI_val_encoded_addr.
- (select_cie_for_fde): Don't match CFI_val_encoded_addr.
- * doc/as.texinfo (.cfi_val_encoded_addr): Document.
-
-2008-09-25 Alan Modra <amodra@bigpond.net.au>
-
- PR 6913
- * listing.c (print_options): Don't call fprintf without format string.
-
-2008-09-19 Alan Modra <amodra@bigpond.net.au>
-
- * write.c (TC_FORCE_RELOCATION_SUB_LOCAL): Heed md_register_arithmetic.
- (TC_VALIDATE_FIX_SUB): Likewise.
- * config/tc-frv.h (TC_FORCE_RELOCATION_SUB_LOCAL): Likewise.
- * config/tc-hppa.h (TC_FORCE_RELOCATION_SUB_LOCAL): Likewise.
- * config/tc-mn10300.h (TC_VALIDATE_FIX_SUB): Likewise.
- * config/tc-sh.h (TC_VALIDATE_FIX_SUB): Likewise.
- (TC_FORCE_RELOCATION_SUB_LOCAL): Likewise.
- * config/tc-sh64.h (TC_VALIDATE_FIX_SUB): Likewise.
- * config/tc-xtensa.h (TC_VALIDATE_FIX_SUB): Likewise.
- * doc/internals.texi (TC_FORCE_RELOCATION_SUB_ABS,
- TC_FORCE_RELOCATION_SUB_LOCAL, TC_VALIDATE_FIX_SUB): Show new param.
-
- * write.c (md_register_arithmetic): Define.
- (fixup_segment): Adjust TC_FORCE_RELOCATION_SUB_ABS invocation.
- Modify error message when registers involved.
- (TC_FORCE_RELOCATION_SUB_ABS): Heed md_register_arithmetic.
- * config/tc-sh.h (TC_FORCE_RELOCATION_SUB_ABS): Likewise.
-
-2008-09-15 Alan Modra <amodra@bigpond.net.au>
-
- * write.c (install_reloc): Correct EMIT_SECTION_SYMBOLS test.
-
-2008-09-15 Alan Modra <amodra@bigpond.net.au>
-
- * config/tc-frv.c (md_apply_fix): Use abs_section_sym for
- relocs with no symbol.
- * config/tc-mmix.c (md_assemble): Mark fake symbol on
- BFD_RELOC_MMIX_BASE_PLUS_OFFSET as OK for use by relocs.
- (mmix_md_end): Likewise mark mmix reg contents section symbol.
-
-2008-09-14 Chris Smith <chris@zxdesign.info>
-
- * config/tc-z80.c: Opcode generation of ld a,(bc) and ld a,(de) was
- broken, as the opcode of ld a,(de) was being emitted for both.
-
-2008-09-12 Sterling Augustine <sterling@tensilica.com>
-
- * config/tc-xtensa.c (init_op_placement_info_table): Allow number of
- operands equal to MAX_INSN_ARGS.
-
-2008-09-11 Jan Kratochvil <jan.kratochvil@redhat.com>
-
- * configure.in: Call AC_SYS_LARGEFILE.
- * config.in: Regenerate.
- * configure: Regenerate.
-
-2008-09-09 Peter Bergner <bergner@vnet.ibm.com>
-
- * config/tc-ppc.c (ppc_setup_opcodes): Simplify POWER4/NOPOWER4 test.
- Remove POWER5 and POWER6 tests.
-
-2008-09-08 John David Anglin <dave.anglin@nrc-cnrc.gc.ca>
-
- * config/tc-hppa.c (hppa_regname_to_dw2regnum): Add register name to
- number support for 32-bit targets.
-
-2008-09-08 Tristan Gingold <gingold@adacore.com>
-
- * NEWS: Add a marker for the 2.19 features.
-
-2008-09-07 John David Anglin <dave.anglin@nrc-cnrc.gc.ca>
-
- * config/tc-hppa.h (DIFF_EXPR_OK): Define for SOM target. Revise
- comment regarding use of difference expressions.
- (TC_FORCE_RELOCATION_SUB_LOCAL): Define to 1.
-
- * dw2gencfi.c (CFI_DIFF_EXPR_OK): Define if not defined.
- (dot_cfi_personality): Use CFI_DIFF_EXPR_OK instead of DIFF_EXPR_OK.
- (dot_cfi_lsda, output_cie, output_fde): Likewise.
- * config/tc-hppa.h (CFI_DIFF_EXPR_OK): Define.
-
-2008-09-06 Richard Sandiford <rdsandiford@googlemail.com>
-
- * config/tc-mips.h (DWARF2_FDE_RELOC_SIZE): Define.
-
-2008-09-03 Nick Clifton <nickc@redhat.com>
-
- * config/tc-i386.c (pe_lcomm_internal): New function. Allows the
- alignment field of the .lcomm directive to be optional.
- (pe_lcomm): New function. Pass pe_lcomm_internal to
- s_comm_internal.
- (md_pseudo_table): Implement .lcomm directive for COFF based
- targets.
- * doc/c-i386.texi (i386-Directives): New node. Used to document
- the .lcomm directive.
-
-2008-08-30 John David Anglin <dave.anglin@nrc-cnrc.gc.ca>
-
- * config/tc-hppa.h: Don't define DWARF2_EH_FRAME_READ_ONLY on Linux
- and NetBSD.
-
-2008-08-29 Eric B. Weddington <eric.weddington@atmel.com>
-
- * config/tc-avr.c (mcu_types): Add atmega16u4.
- * doc/c-avr.texi: Likewise.
-
-2008-08-28 H.J. Lu <hongjiu.lu@intel.com>
-
- * config/tc-ia64.c (CR_IIB0): New.
- (CR_IIB1): Likewise.
- (cr): Add cr.iib0 and cr.iib1.
- (specify_resource): Handle IA64_RS_CR_IIB and CR_IIB0/CR_IIB1.
-
-2008-08-28 Jan Beulich <jbeulich@novell.com>
-
- * config/tc-i386.c (md_assemble): Force number of displacement
- operands to zero when processing string instruction.
- (i386_index_check): Special-case string instruction operands. Don't
- fudge address prefix if there already was a memory operand. Fix
- error message to correctly reflect the addressing mode used.
- (i386_att_operand): Fix comment.
- (i386_intel_operand): Snapshot, clear, and restore base and index
- reg for each operand processed. Increment count of memory operands
- later.
-
-2008-08-27 John David Anglin <dave.anglin@nrc-cnrc.gc.ca>
-
- * config/tc-hppa.c (is_SB_relative): New macro.
- (fix_new_hppa): Remove $segrel$ marker.
- (cons_fix_new_hppa): Set reloc type R_PARISC_SEGREL32 if expression is
- segment relative.
- * config/tc-hppa.h (tc_frob_symbol): Check for $segrel$.
-
-2008-08-27 Jan Beulich <jbeulich@novell.com>
-
- * config/tc-i386.c (check_string): Use register_prefix for error
- message.
- (process_operands): Likewise.
-
-2008-08-26 Mark Mitchell <mark@codesourcery.com>
-
- * c-arm.texi: Add tutorial on ARM unwinding pseudo ops.
-
-2008-08-26 Jie Zhang <jie.zhang@analog.com>
-
- * config/bfin-parse.y (check_macfunc_option): Fix instruction
- mode checking.
- (asm_1): Check mode for 16-bit multiply instructions.
-
-2008-08-24 Alan Modra <amodra@bigpond.net.au>
-
- * configure.in: Update a number of obsolete autoconf macros.
- * configure: Regenerate.
- * aclocal.m4: Regenerate.
-
-2008-08-22 Nick Clifton <nickc@redhat.com>
-
- * config/tc-mcore.c (md_assemble): Increase length of name array
- to include terminating NUL.
-
-2008-08-22 Jie Zhang <jie.zhang@analog.com>
-
- * config/bfin-lex.l (NUMBER): Protect special `.'.
-
-2008-08-22 Alan Modra <amodra@bigpond.net.au>
-
- * symbols.c (symbol_clone): Ensure clones are not external.
-
-2008-08-22 Alan Modra <amodra@bigpond.net.au>
-
- * config/tc-hppa.c (md_begin): Set BSF_KEEP for "dummy_symbol".
-
-2008-08-21 Richard Henderson <rth@redhat.com>
-
- * dw2gencfi.c (DWARF2_FDE_RELOC_SIZE): New.
- (output_cie, output_fde): Use it.
- (DWARF2_EH_FRAME_READ_ONLY): New.
- (cfi_finish): Use it.
-
- * config/tc-hppa.h (DWARF2_FDE_RELOC_SIZE): Set to 8 for 64-bit.
- (DWARF2_CIE_DATA_ALIGNMENT): Change sign.
- (DWARF2_EH_FRAME_READ_ONLY): New.
- * config/tc-hppa.c (tc_gen_reloc): Generate pc-relative relocations
- from the results of DIFF_EXPR_OK manipulation.
-
-2008-08-21 Sterling Augustine <sterling@tensilica.com>
-
- * config/xtensa-istack.h (MAX_INSN_ARGS): Increase to 64.
-
-2008-08-20 Bob Wilson <bob.wilson@acm.org>
-
- * config/tc-xtensa.c (O_tlsfunc, O_tlsarg, O_tlscall): Define.
- (O_tpoff, O_dtpoff): Define.
- (suffix_relocs): Add entries for TLS suffixes.
- (xtensa_elf_cons): Check for invalid use of TLS relocations.
- (map_operator_to_reloc): Add is_literal parameter and use it to
- control translating TLS instruction relocations to the corresponding
- literal relocations.
- (xg_valid_literal_expression): Allow TLS operators.
- (xg_build_to_insn): Copy TLS operators from pseudo-instruction
- operands to generated literals.
- (xg_assemble_literal): Handle TLS operators. Update call to
- map_operator_to_reloc.
- (md_assemble): Handle CALLXn.TLS pseudo-instruction.
- (md_apply_fix): Handle TLS relocations.
- (emit_single_op): Handle TLS operators.
- (convert_frag_immed): Update call to map_operator_to_reloc.
- (vinsn_to_insnbuf): Emit relocations for TLS-related instructions.
- * config/xtensa-istack.h (tinsn_struct): Add tls_reloc field.
- * config/xtensa-relax.c (append_literal_op): Add src_op parameter
- to initialize the op_data field of the BuildOp.
- (build_transition): Use it here to record the source operand
- corresponding to a generated literal.
- * config/xtensa-relax.h (build_op): Comment op_data use for literals.
-
-2008-08-20 H.J. Lu <hongjiu.lu@intel.com>
-
- AVX Programming Reference (August, 2008)
- * config/tc-i386.c (CPU_FLAGS_AES_MATCH): New.
- (CPU_FLAGS_AVX_MATCH): Likewise.
- (CPU_FLAGS_32BIT_MATCH): Updated.
- (cpu_flags_match): Likewise.
-
-2008-08-20 Alan Modra <amodra@bigpond.net.au>
-
- PR 6848
- * write.c (install_reloc): Check that reloc symbols have been
- written.
- (set_symtab): Mark symbols with BSF_KEEP.
-
-2008-08-18 H.J. Lu <hongjiu.lu@intel.com>
-
- * config/tc-i386.c (i386_align_code): Fix a comment typo.
-
-2008-08-15 Alan Modra <amodra@bigpond.net.au>
-
- PR 6526
- * configure.in: Invoke AC_USE_SYSTEM_EXTENSIONS.
- * Makefile.in: Regenerate.
- * aclocal.m4: Regenerate.
- * config.in: Regenerate.
- * configure: Regenerate.
- * doc/Makefile.in: Regenerate.
-
-2008-08-14 Alan Modra <amodra@bigpond.net.au>
-
- * config/tc-tic4x.c (tic4x_operands_parse): Make static.
-
-2008-08-13 Ben Elliston <bje@au.ibm.com>
-
- * doc/as.texinfo (Align): Document the PowerPC behaviour.
-
-2008-08-13 Alan Modra <amodra@bigpond.net.au>
-
- * as.c, as.h, ecoff.c, hash.c, macro.c, symbols.c, config/obj-evax.c,
- config/obj-som.c, config/tc-alpha.c, config/tc-arm.c, config/tc-bfin.c,
- config/tc-bfin.h, config/tc-crx.c, config/tc-frv.c, config/tc-frv.h,
- config/tc-hppa.h, config/tc-i386.c, config/tc-i860.c, config/tc-i960.h,
- config/tc-ia64.c, config/tc-ia64.h, config/tc-m32c.c, config/tc-m32c.h,
- config/tc-m68k.c, config/tc-maxq.c, config/tc-s390.c, config/tc-s390.h,
- config/tc-sparc.c, config/tc-sparc.h, config/tc-spu.c, config/tc-spu.h,
- config/tc-tic4x.c, config/tc-tic4x.h, config/tc-tic54x.c,
- config/tc-tic54x.h, config/tc-vax.c, doc/internals.texi: Banish PARAMS
- and PTR. Convert to ISO C. Delete unnecessary forward declarations.
-
-2008-08-12 Alan Modra <amodra@bigpond.net.au>
-
- * config/tc-arm.c (s_unreq): Adjust hash_delete call.
- * config/tc-ia64.c (dot_rot): Likewise.
-
-2008-08-11 Alan Modra <amodra@bigpond.net.au>
-
- PR 6575
- * hash.c: Expand PTR to void *.
- (hash_delete): Add "freeme" parameter. Call obstack_free.
- * hash.h: Expand PTR to void *.
- (hash_delete): Update prototype.
- * macro.c (macro_expand_body): hash_delete LOCALs from formal_hash.
- * config/tc-tic54x.c (tic54x_remove_local_label): Update hash_delete
- call.
- (subsym_substitute): Likewise.
- * doc/internals.texi (hash_delete): Update.
-
-2008-08-08 Anatoly Sokolov <aesok@post.ru>
-
- * config/tc-avr.c (mcu_types): Add avr25, avr31, avr35, and avr51
- architectures. Reorganize list to put mcu types in correct
- architectures and to order list same as in GCC. Use new ISA
- definitions in include/opcode/avr.h.
- * doc/c-avr.texi: Add avr25, avr31, avr35, and avr51 architecture
- descriptions. Reorganize descriptions to put mcu types in correct
- architectures and to order lists same as in GCC.
-
-2008-08-08 Richard Sandiford <rdsandiford@googlemail.com>
- Daniel Jacobowitz <dan@codesourcery.com>
-
- * config/tc-mips.c (OPTION_CALL_NONPIC): New macro.
- (OPTION_NON_SHARED, OPTION_XGOT, OPTION_MABI, OPTION_32)
- (OPTION_N32, OPTION_64, OPTION_MDEBUG, OPTION_NO_MDEBUG)
- (OPTION_PDR, OPTION_NO_PDR, OPTION_MVXWORKS_PIC): Bump by 1.
- (md_longopts): Add -call_nonpic.
- (md_parse_option): Handle OPTION_CALL_NONPIC.
- (md_show_usage): Add -call_nonpic.
-
-2008-08-08 Sterling Augustine <sterling@tensilica.com>
-
- * config/tc-xtensa.c (exclude_section_from_property_tables): New.
- (xtensa_create_property_segments): Use it.
- (xtensa_create_xproperty_segments): Likewise.
-
-2008-08-08 Alan Modra <amodra@bigpond.net.au>
-
- * doc/internals.texi (DWARF2_FORMAT): Update for 2008-08-04 change.
-
-2008-08-06 Richard Sandiford <rdsandiford@googlemail.com>
-
- * config/tc-mips.c (mips16_reloc_p, got16_reloc_p, hi16_reloc_p)
- (lo16_reloc_p): New functions.
- (reloc_needs_lo_p): Use hi16_reloc_p and got16_reloc_p to
- generalize relocation checks.
- (matching_lo_reloc): New function.
- (fixup_has_matching_lo_p): Use it.
- (mips16_mark_labels): Don't clobber a symbol's visibility.
- (append_insn): Use hi16_reloc_p and lo16_reloc_p.
- (mips16_ip): Handle BFD_RELOC_MIPS16_GOT16 and BFD_RELOC_MIPS16_CALL16.
- (md_apply_fix): Likewise.
- (mips16_percent_op): Add %got and %call16.
- (mips_frob_file): Use got16_reloc_p to generalize relocation checks.
- Use matching_lo_reloc.
- (mips_force_relocation): Use hi16_reloc_p and lo16_reloc_p to
- generalize relocation checks.
- (mips_fix_adjustable): Use lo16_reloc_p to generalize relocation
- checks.
-
-2008-08-06 DJ Delorie <dj@redhat.com>
-
- * NEWS: Mention these changes.
-
- * config/tc-h8300.h (H_TICK_HEX): Define.
- * config/tc-h8300.c (OPTION_H_TICK_HEX): New.
- (md_longopts): Add "-h-tick-hex".
- (md_parse_option): Support it.
- * doc/c-h8300.texi (H8/300 Options): Document it.
- * doc/as.texinfo (Overview): Likewise.
-
- * config/tc-sh.h (H_TICK_HEX): Define.
- * config/tc-sh.c (OPTION_H_TICK_HEX): New.
- (md_longopts): Add "-h-tick-hex".
- (md_parse_option): Support it.
- * doc/c-sh.texi (SH Options): Document it.
- * doc/c-sh64.texi (SH64 Options): Document it.
- * doc/as.texinfo (Overview): Likewise.
-
-2008-08-05 Alan Modra <amodra@bigpond.net.au>
-
- PR gas/6656
- * dwarf2dbg.c (dwarf2_directive_file): Disable gas generated
- debug info if we see compiler generated debug info.
- (dwarf2_directive_loc): Likewise. Remove redundant debug_type test.
-
-2008-08-04 Alan Modra <amodra@bigpond.net.au>
-
- * dwarf2dbg.c: Remove superfluous forward function declarations.
- (DWARF2_FORMAT): Add section arg.
- (out_header): New function, split out from..
- (out_debug_line): ..here.
- (out_debug_aranges): Use out_header.
- (out_debug_abbrev): Add info_seg and line_seg args. Use
- DW_FORM_data8 (for DW_AT_stmt_list) if line_seg is 64-bit.
- (out_debug_info): Use out_header. Output 8 byte DW_AT_stmt_list
- if line_seg is 64-bit.
- (dwarf2_finish): Adjust out_debug_abbrev call.
- * config/tc-mips.h (DWARF2_FORMAT, mips_dwarf2_format): Add sec arg.
- * config/tc-mips.c (mips_dwarf2_format): Likewise.
-
-2008-08-04 Alan Modra <amodra@bigpond.net.au>
-
- * Makefile.am (POTFILES.in): Set LC_ALL=C.
- * Makefile.in: Regenerate.
- * po/POTFILES.in: Regenerate.
-
-2008-08-01 Peter Bergner <bergner@vnet.ibm.com>
-
- * config/tc-ppc.c (parse_cpu): Rename altivec_or_spe to retain_flags.
- Handle -mvsx and -mpower7.
- (md_show_usage): Document -mpower7 and -mvsx.
- * doc/as.texinfo (Target PowerPC): Document -mvsx.
- * doc/c-ppc.texi (PowerPC-Opts): Document -mvsx and -mpower7.
-
-2008-07-31 Peter Bergner <bergner@vnet.ibm.com>
-
- * config/tc-ppc.c (parse_cpu) <power6>: Accept Altivec instructions.
- <cell>: Likewise.
-
-2008-07-30 Michael J. Eager <eager@eagercon.com>
-
- * config/tc-ppc.c (parse_cpu): Separate handling of -m403/405.
- (md_show_usage): Likewise.
-
-2008-07-30 Alan Modra <amodra@bigpond.net.au>
-
- * messages.c, symbols.c, write.c: Silence gcc warnings.
-
-2008-07-28 Ineiev <ineiev@yahoo.co.uk>
-
- * config/tc-i386.c (operand_type_check): Warning fix.
-
-2008-07-26 Michael Eager <eager@eagercon.com>
-
- * doc/as.texinfo: Add description of single-precision attribute.
-
-2008-07-24 Jie Zhang <jie.zhang@analog.com>
-
- * config/bfin-parse.y (asm_1): Error if plain symbol is used
- as load/store offset.
-
-2008-07-22 Chao-ying Fu <fu@mips.com>
-
- * config/tc-mips.c (mips_ip): Reset s to argsStart.
-
-2008-07-22 Jie Zhang <jie.zhang@analog.com>
-
- * config/tc-bfin.c (bfin_gen_loop): Remove loop symbol.
-
-2008-07-21 DJ Delorie <dj@redhat.com>
-
- * config/tc-h8300.c (fix_operand_size): Use the default size
- specified by the .lbranch/.sbranch pseudos.
-
-2008-07-18 DJ Delorie <dj@redhat.com>
-
- * config/tc-m32c.h (H_TICK_HEX): Define.
- * config/tc-m32c.c (OPTION_H_TICK_HEX): Define.
- (md_longopts): Add support for it.
- (md_parse_option): Likewise.
- * doc/as.texinfo (Overview): Add new m32c options.
- * doc/c-m32c.texi (M32C-Modifiers): Likewise
-
- * as.h: (enable_h_tick_hex): New.
- * app.c (enable_h_tick_hex): New.
- (LEX_IS_H): New.
- (do_scrub_begin): Mark 'H' and 'h' as special if enable_h_tick_hex.
- (do_scrub_chars): If enable_h_tick_hex and 'h', check for H'00
- style hex constants and convert the input stream to 0x00 style.
- (do_scrub_chars): If a 'X style character constant is found after
- a symbol character (like you're or X'00), warn the user.
-
-2008-07-10 Richard Sandiford <rdsandiford@googlemail.com>
-
- * config/tc-mips.c (mips16_mark_labels): Use ELF_ST_SET_MIPS16.
- (mips_fix_adjustable): Likewise.
- (mips_frob_file_after_relocs): Likewise.
-
-2008-07-08 Nathan Sidwell <nathan@codesourcery.com>
-
- * config/tc-m68k.c (m68k_set_cpu, m68k_set_arch): Don't complain
- about overriding an earlier setting.
-
-2008-07-07 Adam Nemet <anemet@caviumnetworks.com>
-
- * config/tc-mips.c (NO_ISA_COP): New macro.
- (COP_INSN): New macro.
- (is_opcode_valid): Use them.
- (macro) <ld_st>: Use them. Don't accept coprocessor load store
- insns based on the ISA if CPU is NO_ISA_COP.
- <copz>: Likewise for coprocessor operations.
-
-2008-07-07 Paul Brook <paul@codesourcery.com>
-
- * config/tc-arm.c (arm_fix_adjustable): Don't adjust MOVW/MOVT
- relocations.
-
-2008-07-07 Ralf Corsépius <ralf.corsepius@rtems.org>
-
- * configure.tgt: Add bfin-*-rtems*.
-
-2008-07-04 Alan Modra <amodra@bigpond.net.au>
-
- * config/tc-spu.c (md_apply_fix): Handle fully resolved
- BFD_RELOC_32_PCREL, BFD_RELOC_SPU_HI16 and BFD_RELOC_SPU_LO16.
-
-2008-06-25 Peter Bergner <bergner@vnet.ibm.com>
-
- * config/tc-ppc.c (parse_cpu): Handle -m464.
- (md_show_usage): Likewise.
-
-2008-06-24 Eric B. Weddington <eric.weddington@atmel.com>
-
- Add support for ATtiny13A.
- * config/tc-avr.c (mcu_types): Add attiny13a.
- * doc/c-avr.texi: Likewise.
-
-2008-06-24 Bob Wilson <bob.wilson@acm.org>
- Alan Modra <amodra@bigpond.net.au>
-
- * write.c (relax_segment <rs_org>): Include current stretch
- value when calculating whether .org is backwards.
-
-2008-06-17 Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
-
- * configure: Regenerate.
-
-2008-06-17 Nick Clifton <nickc@redhat.com>
-
- * app.c (do_scrub_chars): Do not UNGET an EOF value.
-
-2008-06-16 Hans-Peter Nilsson <hp@bitrange.com>
-
- PR gas/6607
- * config/tc-mmix.c (s_loc): Assume "negative" addresses belong to
- text_section. Do the "stepping backwards" test for text_section
- using unsigned operands.
-
-2008-06-13 Peter Bergner <bergner@vnet.ibm.com>
-
- * config/tc-ppc.c (ppc_cpu): Use ppc_cpu_t typedef.
- (ppc_insert_operand): Likewise.
- (ppc_machine): Likewise.
- * config/tc-ppc.h: #include "opcode/ppc.h"
- (struct _ppc_fix_extra <ppc_cpu>): Use ppc_cpu_t typedef.
- (ppc_cpu): Update extern decl.
-
-2008-06-12 Adam Nemet <anemet@caviumnetworks.com>
-
- * config/tc-mips.c (validate_mips_insn): Handle field descriptors
- +x, +X, +p, +P, +s, +S.
- (mips_ip): Likewise.
-
- * config/tc-mips.c (validate_mips_insn): Handle field descriptor +Q.
- (mips_ip): Likewise.
- (macro_build): Likewise.
- (CPU_HAS_SEQ): New macro.
- (macro2) <M_SEQ_I, M_SNE_I>: Use it. Emit seq/sne and seqi/snei.
-
-2008-06-09 Eric B. Weddington <eric.weddington@atmel.com>
-
- * config/tc-avr.c (mcu_types): Remove support for ATmega32HVB device.
- * doc/c-avr.texi: Likewise.
-
-2008-06-04 Nick Clifton <nickc@redhat.com>
-
- * app.c (do_scrub_chars): Do not UNGET an EOF value.
-
-2008-06-03 H.J. Lu <hongjiu.lu@intel.com>
-
- * config/tc-i386.c (set_sse_check): New.
- (md_pseudo_table): Add "sse_check".
-
-2008-06-03 Paul Brook <paul@codesourcery.com>
-
- * config/tc-arm.c (do_t_rbit): Populate both rm fields.
-
-2008-05-30 Nick Clifton <nickc@redhat.com>
-
- PR 5523
- * config/tc-avr.c (avr_ldi_expression): Do not warn about unknown
- relocs here.
-
-2008-05-29 Maxim Kuvyrkov <maxim@codesourcery.com>
-
- * config/tc-mips.c (mips_cpu_info_table): Move records for
- ST Loongson-2E/2F processors to a better place.
-
-2008-05-23 H.J. Lu <hongjiu.lu@intel.com>
-
- PR gas/6518
- * config/tc-i386.c (match_template): Report ambiguous operand
- size, not invalid suffix when there is no match in Intel
- syntax.
-
-2008-05-22 Paul Brook <paul@codesourcery.com>
-
- * config/tc-arm.c (parse_cond): Covert to lowercase before matching.
-
-2008-05-21 I-Jui Sung <ijsung@gmail.com>
-
- * config/tc-arm.c (arm_cpus): Add Faraday ARMv4 and ARMv5TE
- compatible cores: fa526, fa626, fa626te, fa726te.
- * doc/c-arm.texi (ARM Opts): Add -mcpu={fa526, fa626, fa626te,
- fa726te} options.
-
-2008-05-14 Alan Modra <amodra@bigpond.net.au>
-
- * Makefile.am: Run "make dep-am".
- * Makefile.in: Regenerate.
- * doc/Makefile.in: Regenerate.
- * po/POTFILES.in: Regenerate.
-
-2008-05-09 Catherine Moore <clm@codesourcery.com>
-
- * config/tc-mips.c (mips_frob_file): Don't match MIPS16 relocs
- with non-MIPS16 relocs.
-
-2008-05-09 Chao-ying Fu <fu@mips.com>
-
- * config/tc-mips.c (md_begin): Use strncmp to compare TARGET_OS, in
- case that some characters append at the end of the name.
- (mips_ip): Likewise.
- (s_change_sec): Likewise.
- (md_section_align): Likewise.
-
-2008-05-07 Bob Wilson <bob.wilson@acm.org>
-
- * config/tc-xtensa.c (xtensa_create_property_segments): Use
- xtensa_make_property_section instead of xtensa_get_property_section.
- (xtensa_create_xproperty_segments): Likewise.
-
-2008-05-02 H.J. Lu <hongjiu.lu@intel.com>
-
- * NEWS: Mention XSAVE, EPT and MOVBE.
-
- * config/tc-i386.c (cpu_arch): Add .movbe and .ept.
- (md_show_usage): Add .movbe and .ept.
-
- * doc/c-i386.texi: Add movbe and ept to -march=. Document
- .movbe and .ept.
-
-2008-04-29 David S. Miller <davem@davemloft.net>
-
- * config/tc-sparc.c (v9a_asr_table): Fix order of softint entries.
-
-2008-04-28 Adam Nemet <anemet@caviumnetworks.com>
-
- * config/tc-mips.c (file_mips_soft_float, file_mips_single_float):
- New statics.
- (OPTION_ELF_BASE): Make room for new option macros.
- (OPTION_SOFT_FLOAT, OPTION_HARD_FLOAT, OPTION_SINGLE_FLOAT,
- OPTION_DOUBLE_FLOAT): New option macros.
- (md_longopts): Add msoft-float, mhard-float, msingle-float and
- mdouble-float.
- (md_parse_option): Handle OPTION_SINGLE_FLOAT,
- OPTION_DOUBLE_FLOAT, OPTION_SOFT_FLOAT and OPTION_HARD_FLOAT.
- (md_show_usage): Add -msoft-float, -mhard-float, -msingle-float
- and -mdouble-float.
- (struct mips_set_options): New fields soft_float and single_float.
- (mips_opts): Initialized them. Add comment for each field
- initializer.
- (mips_after_parse_args): Set them based on file_mips_soft_float
- and file_mips_single_float.
- (s_mipsset): Add support for `.set softfloat', `.set hardfloat',
- `.set singlefloat' and `.set doublefloat'.
- (is_opcode_valid): New function to invoke OPCODE_IS_MEMBER.
- Handle single-float and soft-float instructions here.
- (macro_build, mips_ip): Use it instead of OPCODE_IS_MEMBER.
- (is_opcode_valid_16): New function.
- (mips16_ip): Use it instead of OPCODE_IS_MEMBER.
- (macro) <M_LDC1_AB, M_SDC1_AB, M_L_DOB, M_L_DAB, M_S_DAB,
- M_S_DOB>: Remove special-casing of r4650.
- * doc/c-mips.texi (-march=): Add Octeon.
- (MIPS Opts): Document -msoft-float and -mhard-float. Document
- -msingle-float and -mdouble-float.
- (MIPS floating-point): New section. Document `.set softfloat' and
- `.set hardfloat'. Document `.set singlefloat' and `.set
- doublefloat'.
-
-2008-04-25 David S. Miller <davem@davemloft.net>
-
- * config/tc-sparc.c: Accept 'softint_clear' and 'softint_set'
- %asr aliases.
-
- * doc/c-sparc.texi: Consistently refer to architecture 'versions',
- rather than occaisionally 'levels'. Consistently refer to Sun's
- UNIX variant as SunOS, every version of Solaris is also SunOS.
- Document new 'softint_clear' and 'softint_set' aliases. Clarify
- which architecture versions support '%dcr', '%cq', and '%gl'. Add
- section on 32-bit/64-bit opcode translations.
-
-2008-04-23 Mike Frysinger <vapier@gentoo.org>
-
- * Makefile.am (OBJ_FORMAT_CFILES): Add config/obj-fdpicelf.c.
- (OBJ_FORMAT_HFILES): Add config/obj-fdpicelf.h.
- (obj-fdpicelf.o): Define.
- * Makefile.in: Regenerate.
- * configure.tgt: Set bfd_gas to yes when fmt is fdpicelf.
- (bfin-*-*): Delete.
- (bfin-*-linux-uclibc): New; set fmt to fdpicelf and em to linux.
- (bfin-*-uclinux*): New; set fmt to elf and em to linux.
- * config/obj-fdpicelf.c: New.
- * config/obj-fdpicelf.h: Likewise.
- * config/tc-bfin.c (bfin_flags, bfin_pic_flag): Set default based on
- the OBJ_FDPIC_ELF define.
- (OPTION_NOPIC): Define.
- (md_longopts): Add mnopic and mno-fdpic.
- (md_parse_option): Handle OPTION_NOPIC.
-
-2008-04-23 Paolo Bonzini <bonzini@gnu.org>
-
- * aclocal.m4: Regenerate.
- * configure: Regenerate.
-
-2008-04-23 David S. Miller <davem@davemloft.net>
-
- * config/tc-sparc.c (v9a_asr_table): Add missing
- 'stick' and 'stick_cmpr', and document ordering rules
- of table.
- (tc_gen_reloc): Accept BFD_RELOC_SPARC_PC22 and
- BFD_RELOC_SPARC_PC10.
- * doc/c-sparc.texi: New section on Sparc constants.
- Add documentation for %stick and %stick_cmpr.
-
-2008-04-22 David S. Miller <davem@davemloft.net>
-
- * config/obj-elf.c (obj_elf_section_type): Add prototype
- before obj_elf_section_word and add 'warn' arg.
- (obj_elf_section_word): Add type pointer arg, and if no #SECTION
- is matched, try checking for #SECTION_TYPE.
- (obj_elf_section): Adjust for new args.
- (obj_elf_type_name): New function.
- (obj_elf_type): Call it, and accept STT_foo number strings
- in .type statements as output by SunPRO compiler.
-
-2008-04-22 H.J. Lu <hongjiu.lu@intel.com>
-
- * config/tc-i386.c (md_assemble): Don't check SSE instructions
- if noavx is 0.
-
-2008-04-18 David S. Miller <davem@davemloft.net>
-
- * doc/c-sparc.texi: Add syntax section.
-
-2008-04-18 H.J. Lu <hongjiu.lu@intel.com>
-
- * config/tc-i386.c (build_modrm_byte): Don't check FMA to swap
- REG and NDS for instructions with immediate operand.
-
-2008-04-18 H.J. Lu <hongjiu.lu@intel.com>
-
- * config/tc-i386.c (build_modrm_byte): Swap REG and NDS for
- FMA.
-
-2008-04-16 David S. Miller <davem@davemloft.net>
-
- * config/tc-sparc.c (sparc_ip): Add support for gotdata mnemonics
- and relocation generation.
- (tc_gen_reloc): Likewise.
-
-2008-04-15 Andrew Stubbs <andrew.stubbs@st.com>
-
- * config/tc-sh.c (md_apply_fix): Make sure BFD_RELOC_SH_PCRELIMM8BY4
- relocations are properly aligned, and not negative.
-
-2008-04-15 Khem Raj <kraj@mvista.com>
-
- * doc/tc-arm.texi: Fix fnstart and fnend directive names.
-
-2008-04-14 Edmar Wienskoski <edmar@freescale.com>
-
- * config/tc-ppc.c (parse_cpu): Handle "e500mc". Extend "e500" to
- accept e500mc instructions.
- (md_show_usage): Document -me500mc.
-
-2008-04-11 Nick Clifton <nickc@redhat.com>
-
- * listing.c (print_timestamp): Use localtime rather than
- localtime_r since not all build environments provide the latter.
-
-2008-04-10 H.J. Lu <hongjiu.lu@intel.com>
-
- * NEWS: Mention -msse-check=[none|error|warning].
-
- * config/tc-i386.c (sse_check): New.
- (OPTION_MSSE_CHECK): Likewise.
- (md_assemble): Check SSE instructions if needed.
- (md_longopts): Add -msse-check.
- (md_parse_option): Handle OPTION_MSSE_CHECK.
- (md_show_usage): Show -msse-check=[none|error|warning].
-
- * doc/c-i386.texi: Document -msse-check=[none|error|warning].
-
-2008-04-10 Santiago Urueña <suruena@gmail.com>
-
- * listing.c: Add -ag listing flag to show general information in
- listings such as gas version, passed options, and time stamp.
- (listing_general_info): New function.
- (print_options): New function.
- (print_single_option): New function.
- (print_timestamp): New function.
- (MAX_DATELEN): Define.
- (listing_print): Add call to listing_general_info.
- * listing.h (LISTING_GENERAL): Define.
- (listing_print): Add new parameter.
- * as.c (show_usage): Print new switch.
- (parse_args): Parse new switch.
- (main): Pass command line on to listing_print.
- * NEWS: Mention this new feature.
- * doc/as.texinfo: Document the new sub-option.
-
-2008-04-08 Alan Modra <amodra@bigpond.net.au>
-
- * dwarf2dbg.c (dwarf2_emit_insn): Simplify test before dwarf2_where
- call. Delete out of date comment.
- (dwarf2_consume_line_info): Always clear dwarf2_loc_directive_seen.
- (dwarf2_emit_label): Don't emit unless there has been a previous
- .file or we are outputting assembler generated debug.
- dwarf2_consume_line_info after emitting line info, not before.
- (out_debug_info): Simplify files_in_use test.
-
-2008-04-07 H.J. Lu <hongjiu.lu@intel.com>
-
- * config/tc-i386.c (parse_real_register): Return AVX register
- only if AVX is enabled.
-
-2008-04-07 Kaz Kojima <kkojima@rr.iij4u.or.jp>
-
- PR gas/6043
- * config/tc-sh64.c (shmedia_md_pcrel_from_section): Use
- md_pcrel_from_section for BFD_RELOC_64 and BFD_RELOC_64_PCREL.
-
-2008-04-04 Adrian Bunk <bunk@stusta.de>
- Bob Wilson <bob.wilson@acm.org>
-
- * config/tc-xtensa.c (xg_apply_fix_value): Check return code from
- call to decode_reloc.
-
-2008-04-04 H.J. Lu <hongjiu.lu@intel.com>
-
- * NEWS: Mention XSAVE. Change CLMUL to PCLMUL.
-
- * config/tc-i386.c (cpu_arch): Add .pclmul.
- (md_show_usage): Replace clmul with pclmul.
- * doc/c-i386.texi: Likewise.
-
-2008-04-03 H.J. Lu <hongjiu.lu@intel.com>
-
- * NEWS: Mention AES, CLMUL, AVX/FMA and -msse2avx.
-
- * doc/c-i386.texi: Add avx, aes, clmul and fma to -march=.
- Document -msse2avx, .avx, .aes, .clmul and .fma.
-
- * config/tc-i386.c (YMMWORD_MNEM_SUFFIX): New.
- (vex_prefix): Likewise.
- (sse2avx): Likewise.
- (CPU_FLAGS_ARCH_MATCH): Likewise.
- (CPU_FLAGS_64BIT_MATCH): Likewise.
- (CPU_FLAGS_32BIT_MATCH): Likewise.
- (CPU_FLAGS_PERFECT_MATCH): Likewise.
- (regymm): Likewise.
- (vex_imm4): Likewise.
- (fits_in_imm4): Likewise.
- (build_vex_prefix): Likewise.
- (VEX_check_operands): Likewise.
- (bad_implicit_operand): Likewise.
- (OPTION_MSSE2AVX): Likewise.
- (T_YMMWORD): Likewise.
- (_i386_insn): Add vex.
- (cpu_arch): Add .avx, .aes, .clmul and .fma.
- (cpu_flags_match): Changed to take a pointer to const template.
- Enable encoding SSE instructions with VEX prefix for -msse2avx.
- (match_mem_size): Also check ymmword.
- (operand_type_match): Clear ymmword.
- (md_begin): Allow '_' in mnemonic.
- (type_names): Add OPERAND_TYPE_VEX_IMM4.
- (process_immext): Update assert.
- (md_assemble): Don't call process_immext if sse2avx and immext
- are true. Call build_vex_prefix if vex is true.
- (parse_insn): Updated for cpu_flags_match.
- (swap_operands): Handle 5 operands.
- (match_template): Handle 5 operands. Updated for cpu_flags_match.
- Check regymm. Call VEX_check_operands. Handle YMMWORD_MNEM_SUFFIX.
- (process_suffix): Handle YMMWORD_MNEM_SUFFIX.
- (check_byte_reg): Check regymm.
- (process_operands): Duplicate the destination register for
- -msse2avx if needed.
- (build_modrm_byte): Updated for instructions with VEX encoding.
- (output_insn): Output VEX prefix if needed.
- (md_longopts): Add msse2avx.
- (md_parse_option): Handle OPTION_MSSE2AVX.
- (md_show_usage): Add avx, aes, clmul, fma and -msse2avx.
- (intel_e09): Support YMMWORD.
- (intel_e11): Likewise.
- (intel_get_token): Likewise.
-
-2008-03-28 Eric B. Weddington <eric.weddington@atmel.com>
-
- * config/tc-avr.c (mcu_types): Add attiny167.
- * doc/c-avr.texi: Likewise.
-
-2008-03-28 Eric B. Weddington <eric.weddington@atmel.com>
-
- * config/tc-avr.c (mcu_types): Add atmega32u4.
- * doc/c-avr.texi: Likewise.
-
-2008-03-28 Eric B. Weddington <eric.weddington@atmel.com>
-
- * config/tc-avr.c (mcu_types): Add atmega32c1.
- * doc/c-avr.texi: Likewise.
-
-2008-03-28 Paul Brook <paul@codesourcery.com>
-
- * config/tc-arm.c (parse_neon_mov): Parse register before immediate
- to avoid spurious symbols.
-
-2008-03-28 Nathan Sidwell <nathan@codesourcery.com>
-
- * config/tc-m68k.c (md_convert_frag_1): Replace as_fatal with
- as_bad_where.
-
-2008-03-27 Eric B. Weddington <eric.weddington@atmel.com>
-
- * config/tc-avr.c (mcu_types): Add atmega32m1.
- * doc/c-avr.texi: Likewise.
-
-2008-03-27 Ineiev <ineiev@yahoo.co.uk>
-
- * config/tc-arm.c (do_neon_cvt): Move variable declarations to
- start of block.
- (do_neon_ext): Fix sign of comparison.
-
-2008-03-26 Bernd Schmidt <bernd.schmidt@analog.com>
-
- From Jie Zhang <jie.zhang@analog.com>
- * config/bfin-parse.y (asm_1): Check AREGS in comparison
- instructions. And call yyerror when comparing PREG with
- DREG.
- (check_macfunc_option): New.
- (check_macfuncs): Check option by calling check_macfunc_option.
- Fix comparison always true warnings. Both scalar instructions
- of vector instruction must share the same mode option. Only allow
- option mode at the end of the second instruction of the vector.
- (asm_1): Check option by calling check_macfunc_option.
-
- * config/bfin-parse.y (check_macfunc_option): Allow (IU)
- option for multiply and multiply-accumulate to data register
- instruction.
- (check_macfuncs): Don't check if accumulator matches the data register
- here.
- (assign_macfunc): Check if accumulator matches the
- data register in each rule that moves to the data
- register.
-
- * config/tc-bfin.c (bfin_start_line_hook): Localize the labels
- generated for LOOP_BEGIN and LOOP_END instructions.
- (bfin_gen_loop): Likewise.
-
-2008-03-19 Andreas Krebbel <krebbel1@de.ibm.com>
-
- * config/tc-s390.c (md_parse_option): z10 option added.
-
-2008-03-17 Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
-
- * aclocal.m4: Regenerate.
- * configure: Likewise.
- * Makefile.in: Likewise.
- * doc/Makefile.in: Likewise.
-
-2008-03-17 Adrian Bunk <bunk@stusta.de>
-
- PR 5946
- * config/tc-hppa.c (is_same_frag): Delete.
-
-2008-03-14 Sterling Augustine <sterling@tensilica.com>
-
- * config/tc-xtensa.h (xtensa_relax_statesE): Update comment for
- RELAX_LOOP_END_ADD_NOP.
-
-2008-03-13 Evandro Menezes <evandro@yahoo.com>
-
- PR gas/5895
- * read.c (s_mexit): Warn if attempting to exit a macro when not
- inside a macro definition.
-
-2008-03-13 Alan Modra <amodra@bigpond.net.au>
-
- * Makefile.am: Run "make dep-am".
- * Makefile.in: Regenerate.
- * configure: Regenerate.
-
-2008-03-09 Paul Brook <paul@codesourcery.com>
-
- * config/tc-arm.c (arm_cpu_option_table): Add cortex-a9.
- * doc/c-arm.texi: Add cortex-a9.
-
-2008-03-09 Paul Brook <paul@codesourcery.com>
-
- * config/tc-arm.c (fpu_vfp_ext_d32): New vairable.
- (parse_vfp_reg_list, encode_arm_vfp_reg): Use it.
- (arm_option_cpu_value): Add vfpv3-d16, vfpv2 and vfpv3.
- (aeabi_set_public_attributes): Handle Tag_VFP_arch=VFPV3-D16.
- * doc/c-arm.texi: Document new ARM FPU variants.
-
-2008-03-07 Paul Brook <paul@codesourcery.com>
-
- * config/tc-arm.c (md_apply_fix): Use correct offset range.
-
-2008-03-07 Alan Modra <amodra@bigpond.net.au>
-
- * config/tc-ppc.c (ppc_setup_opcodes): Tidy. Add code to test
- for strict ordering of powerpc_opcodes, but disable for now.
-
-2008-03-04 Paul Brook <paul@codesourcery.com>
-
- * config/tc-arm.c (arm_ext_barrier, arm_ext_msr): New.
- (arm_ext_v7m): Rename...
- (arm_ext_m): ... to this. Include v6-M.
- (do_t_add_sub): Allow narrow low-reg non flag setting adds.
- (do_t_mrs, do_t_msr, aeabi_set_public_attributes): Use arm_ext_m.
- (md_assemble): Allow wide msr instructions.
- (insns): Add classifications for v6-m instructions.
- (arm_cpu_option_table): Add cortex-m1.
- (arm_arch_option_table): Add armv6-m.
- (cpu_arch): Add ARM_ARCH_V6M. Fix numbering of other v6 variants.
-
-2008-03-03 Sterling Augustine <sterling@tensilica.com>
- Bob Wilson <bob.wilson@acm.org>
-
- * config/tc-xtensa.c (xtensa_num_pipe_stages): New.
- (md_begin): Initialize it.
- (resources_conflict): Use it.
-
-2008-03-03 Sterling Augustine <sterling@tensilica.com>
-
- * config/tc-xtensa.h (RELAX_XTENSA_NONE): New.
-
-2008-03-03 Denys Vlasenko <vda.linux@googlemail.com>
- H.J. Lu <hongjiu.lu@intel.com>
-
- PR gas/5543
- * read.c (pseudo_set): Don't allow global register symbol.
-
- * symbols.c (S_SET_EXTERNAL): Don't allow register symbol
- global.
-
-2008-03-03 H.J. Lu <hongjiu.lu@intel.com>
-
- PR gas/5543
- * write.c (write_object_file): Don't allow symbols which were
- equated to register. Stop if there is an error.
-
-2008-03-01 Alan Modra <amodra@bigpond.net.au>
-
- * config/tc-ppc.h (struct _ppc_fix_extra): New.
- (ppc_cpu): Declare.
- (TC_FIX_TYPE, TC_INIT_FIX_DATA): Define.
- * config/tc-ppc.c (ppu_cpu): Make global.
- (ppc_insert_operand): Add ppu_cpu parameter.
- (md_assemble): Adjust for above change.
- (md_apply_fix): Pass tc_fix_data.ppc_cpu to ppc_insert_operand.
-
-2008-02-22 Nick Clifton <nickc@redhat.com>
-
- * config/tc-arm.c (do_bx): Only test EF_ARM_EABI_VERSION on ELF
- targeted ARM ports, otherwise just skip generating the reloc.
-
-2008-02-18 H.J. Lu <hongjiu.lu@intel.com>
-
- * doc/c-i386.texi: Update -march= and .arch.
-
-2008-02-18 Nick Clifton <nickc@redhat.com>
-
- * config/tc-mn10300.c (has_known_symbol_location): New function.
- Do not regard weak symbols as having a known location.
- (md_estimate_size_before_relax): Use new function.
- (md_pcrel_from): Do not compute a pcrel against a weak symbol.
-
-2008-02-18 Jan Beulich <jbeulich@novell.com>
-
- * config/tc-i386.c (match_template): Disallow 'l' suffix when
- currently selected CPU has no 32-bit support.
- (parse_real_register): Do not return registers not available on
- currently selected CPU.
-
-2008-02-16 H.J. Lu <hongjiu.lu@intel.com>
-
- * config/tc-i386.c (process_immext): Fix format.
-
-2008-02-16 H.J. Lu <hongjiu.lu@intel.com>
-
- * config/tc-i386.c (inoutportreg): New.
- (process_immext): New.
- (md_assemble): Use it.
- (update_imm): Use imm16 and imm32s.
- (i386_att_operand): Use inoutportreg.
-
-2008-02-14 H.J. Lu <hongjiu.lu@intel.com>
-
- * config/tc-i386.c (operand_type_all_zero): New.
- (operand_type_set): Likewise.
- (operand_type_equal): Likewise.
- (cpu_flags_all_zero): Likewise.
- (cpu_flags_set): Likewise.
- (cpu_flags_equal): Likewise.
- (UINTS_ALL_ZERO): Removed.
- (UINTS_SET): Likewise.
- (UINTS_CLEAR): Likewise.
- (UINTS_EQUAL): Likewise.
- (cpu_flags_match): Updated.
- (smallest_imm_type): Likewise.
- (set_cpu_arch): Likewise.
- (md_assemble): Likewise.
- (optimize_imm): Likewise.
- (match_template): Likewise.
- (process_suffix): Likewise.
- (update_imm): Likewise.
- (process_drex): Likewise.
- (process_operands): Likewise.
- (build_modrm_byte): Likewise.
- (i386_immediate): Likewise.
- (i386_displacement): Likewise.
- (i386_att_operand): Likewise.
- (parse_real_register): Likewise.
- (md_parse_option): Likewise.
- (i386_target_format): Likewise.
-
-2008-02-14 Dimitry Andric <dimitry@andric.com>
-
- PR gas/5712
- * config/tc-arm.c (s_arm_unwind_save): Advance the input line
- pointer past the comma after parsing a floating point register
- name.
-
-2008-02-14 Hakan Ardo <hakan@debian.org>
-
- PR gas/2626
- * config/tc-avr.c (mcu_types): Change the ISA tyoe of the attiny26
- to AVR_ISA_2xxe.
- (avr_operand): Disallow post-increment addressing in the lpm
- instruction for the attiny26.
-
-2008-02-13 Jan Beulich <jbeulich@novell.com>
-
- * config/tc-i386.c (parse_real_register): Don't return 'FLAT'
- if not in Intel mode.
- (i386_intel_operand): Ignore segment overrides in immediate and
- offset operands.
- (intel_e11): Range-check i.mem_operands before use as array
- index. Filter out FLAT for uses other than as segment override.
- (intel_get_token): Remove broken promotion of "FLAT:" to mean
- "offset FLAT:".
-
-2008-02-13 Jan Beulich <jbeulich@novell.com>
-
- * config/tc-i386.c (intel_e09): Also special-case 'bound'.
-
-2008-02-13 Jan Beulich <jbeulich@novell.com>
-
- * config/tc-i386.c (allow_pseudo_reg): New.
- (parse_real_register): Check for NULL just once. Allow all
- register table entries when allow_pseudo_reg is non-zero.
- Don't allow any registers without type when allow_pseudo_reg
- is zero.
- (tc_x86_regname_to_dw2regnum): Replace with ...
- (tc_x86_parse_to_dw2regnum): ... this.
- (tc_x86_frame_initial_instructions): Adjust for above change.
- * config/tc-i386.h (tc_regname_to_dw2regnum): Remove.
- (tc_parse_to_dw2regnum): New.
- (tc_x86_regname_to_dw2regnum): Replace with ...
- (tc_x86_parse_to_dw2regnum): ... this.
- * dw2gencfi.c (tc_parse_to_dw2regnum): New, broken out of ...
- (cfi_parse_reg): ... this. Use tc_parse_to_dw2regnum. Adjust
- error handling.
-
-2008-02-12 Nick Clifton <nickc@redhat.com>
-
- * config/tc-tic4x.c (tic4x_insn_insert): Add const qualifier to
- argument.
- (tic4x_insn_add): Likewise.
- (md_begin): Drop cast that was discarding a const qualifier.
- * config/tc-d30v.c (get_reloc): Add const qualifier to op
- argument.
- (build_insn): Drop cast that was discarding a const qualifier.
-
-2008-02-11 H.J. Lu <hongjiu.lu@intel.com>
-
- * config/tc-i386.c (cpu_arch): Add .xsave.
- (md_show_usage): Add .xsave.
-
- * doc/c-i386.texi: Add xsave to -march=.
-
-2008-02-07 Alan Modra <amodra@bigpond.net.au>
-
- * read.c (s_weakref): Don't pass unadorned NULL to concat.
- * config/tc-i386.c (set_cpu_arch, md_parse_option): Likewise.
-
-2008-02-05 Sterling Augustine <sterling@tensilica.com>
-
- * config/tc-xtensa.c (relax_frag_immed): Change internal consistency
- checks into assertions. When relaxation produces an operation that
- does not fit in the current FLIX instruction, make sure that the
- operation is relaxed as needed to account for being placed following
- the current instruction.
-
-2008-02-04 H.J. Lu <hongjiu.lu@intel.com>
-
- PR 5715
- * configure: Regenerated.
-
-2008-02-04 Adam Nemet <anemet@caviumnetworks.com>
-
- * config/tc-mips.c (mips_cpu_info_table): Add Octeon.
-
-2008-01-31 Marc Gauthier <marc@tensilica.com>
-
- * configure.tgt (xtensa*-*-*): Recognize processor variants.
-
-2008-01-25 Kai Tietz <kai.tietz@onevision.com>
-
- * read.c: (emit_expr): Correct for mingw use of printf size
- specifier.
-
-2008-01-24 Bob Wilson <bob.wilson@acm.org>
-
- * doc/c-xtensa.texi (Xtensa Syntax): Clarify handling of opcodes that
- can only be encoded in FLIX instructions but are not specified as such.
- (Xtensa Automatic Alignment): Remove obsolete comment about debugging
- labels.
-
-2008-01-24 H.J. Lu <hongjiu.lu@intel.com>
-
- * NEWS: Mention new command line options for x86 targets.
-
-2008-01-23 H.J. Lu <hongjiu.lu@intel.com>
-
- * config/tc-i386.c (md_show_usage): Replace tabs with spaces.
-
-2008-01-23 Eric B. Weddington <eric.weddington@atmel.com>
-
- * config/tc-avr.c (mcu_types): Change opcode set for at86rf401.
-
-2008-01-23 H.J. Lu <hongjiu.lu@intel.com>
-
- * config/tc-i386.c (md_show_usage): Show more processors for
- -march=/-mtune=.
-
-2008-01-22 H.J. Lu <hongjiu.lu@intel.com>
-
- * config/tc-i386.c (i386_target_format): Remove cpummx2.
-
-2008-01-22 H.J. Lu <hongjiu.lu@intel.com>
-
- * config/tc-i386.c (XXX_PREFIX): Moved from tc-i386.h.
- (XXX_MNEM_SUFFIX): Likewise.
- (END_OF_INSN): Likewise.
- (templates): Likewise.
- (modrm_byte): Likewise.
- (rex_byte): Likewise.
- (DREX_XXX): Likewise.
- (drex_byte): Likewise.
- (sib_byte): Likewise.
- (processor_type): Likewise.
- (arch_entry): Likewise.
- (cpu_sub_arch_name): Remove const.
- (cpu_arch): Add .vmx and .smx.
- (set_cpu_arch): Append cpu_sub_arch_name.
- (md_parse_option): Support -march=CPU[,+EXTENSION...].
- (md_show_usage): Updated.
-
- * config/tc-i386.h (XXX_PREFIX): Moved to tc-i386.c.
- (XXX_MNEM_SUFFIX): Likewise.
- (END_OF_INSN): Likewise.
- (templates): Likewise.
- (modrm_byte): Likewise.
- (rex_byte): Likewise.
- (DREX_XXX): Likewise.
- (drex_byte): Likewise.
- (sib_byte): Likewise.
- (processor_type): Likewise.
- (arch_entry): Likewise.
-
- * doc/as.texinfo: Update i386 -march option.
-
- * doc/c-i386.texi: Update -march= for ISA.
-
-2008-01-18 Bob Wilson <bob.wilson@acm.org>
-
- * config/tc-xtensa.c (xtensa_leb128): New function.
- (md_pseudo_table): Use it for sleb128 and uleb128.
- (is_leb128_expr): New internal flag.
- (xtensa_symbol_new_hook): Check new flag.
-
-2008-01-16 Eric B. Weddington <eric.weddington@atmel.com>
-
- * config/tc-avr.c (mcu_types): Change opcode set for avr3,
- at90usb82, at90usb162.
- * doc/c-avr.texi: Change architecture grouping for at90usb82,
- at90usb162.
- These changes support the new avr35 architecture group in gcc.
-
-2008-01-15 H.J. Lu <hongjiu.lu@intel.com>
-
- * config/tc-i386.c (md_assemble): Also zap movzx and movsx
- suffix for AT&T syntax.
-
-2008-01-14 H.J. Lu <hongjiu.lu@intel.com>
-
- * config/tc-i386.c (match_reg_size): New.
- (match_mem_size): Likewise.
- (operand_size_match): Likewise.
- (operand_type_match): Also clear all size fields.
- (match_template): Skip Intel syntax when in AT&T syntax.
- Call operand_size_match to check operand size.
- (i386_att_operand): Set the mem field to 1 for memory
- operand.
- (i386_intel_operand): Likewise.
-
-2008-01-12 H.J. Lu <hongjiu.lu@intel.com>
-
- PR gas/5534
- * config/tc-i386.c (_i386_insn): Update comment.
- (operand_type_match): Also clear unspecified.
- (operand_type_register_match): Likewise.
- (parse_operands): Initialize unspecified.
- (i386_intel_operand): Likewise.
- (match_template): Check memory and accumulator operand size.
- (i386_att_operand): Clear unspecified on register operand.
- (intel_e11): Likewise.
- (intel_e09): Set operand size and clean unspecified for
- "XXX PTR".
-
-2008-01-11 Andreas Schwab <schwab@suse.de>
-
- * read.c (s_space): Declare `repeat' as offsetT.
-
-2008-01-10 H.J. Lu <hongjiu.lu@intel.com>
-
- * config/tc-i386.c (match_template): Check processor support
- first.
-
-2008-01-10 H.J. Lu <hongjiu.lu@intel.com>
-
- * config/tc-i386.c (match_template): Continue if processor
- doesn't match.
-
-2008-01-09 Alexandre Oliva <aoliva@redhat.com>
-
- * config/tc-ia64.c (ia64_convert_frag): Zero-initialize room for
- unwind personality function address.
-
-2008-01-09 Bob Wilson <bob.wilson@acm.org>
-
- * dwarf2dbg.c (out_sleb128): Delete.
- (size_fixed_inc_line_addr, emit_fixed_inc_line_addr): New.
- (out_fixed_inc_line_addr): Delete.
- (relax_inc_line_addr, dwarf2dbg_estimate_size_before_relax): Call new
- size_fixed_inc_line_addr if DWARF2_USE_FIXED_ADVANCE_PC is set.
- (dwarf2dbg_convert_frag): Likewise for emit_fixed_inc_line_addr.
- (process_entries): Remove calls to out_fixed_inc_line_addr. When
- DWARF2_USE_FIXED_ADVANCE_PC is set, call relax_inc_line_addr.
- * read.h (emit_expr_fix): New prototype.
- * read.c (emit_expr): Move code to emit_expr_fix and use it here.
- (emit_expr_fix): New.
-
-2008-01-09 H.J. Lu <hongjiu.lu@intel.com>
-
- * config/tc-i386.c (match_template): Check register size
- only when size of operands can be encoded the canonical way.
-
-2008-01-08 H.J. Lu <hongjiu.lu@intel.com>
-
- * config/tc-i386.c (i386_operand): Renamed to ...
- (i386_att_operand): This.
- (parse_operands): Updated.
-
-2008-01-05 H.J. Lu <hongjiu.lu@intel.com>
-
- * doc/c-i386.texi: Update .att_mnemonic and .intel_mnemonic.
-
- * config/tc-i386.c (set_intel_mnemonic): Set intel_mnemonic
- only.
- (md_assemble): Remove Intel mode workaround.
- (match_template): Check support for old gcc, AT&T mnemonic
- and Intel Syntax.
- (md_parse_option): Don't set intel_mnemonic to 0 for
- OPTION_MOLD_GCC.
-
-2008-01-04 H.J. Lu <hongjiu.lu@intel.com>
-
- * config/tc-i386.h: Update copyright to 2008.
-
-2008-01-04 Nick Clifton <nickc@redhat.com>
-
- * config/tc-ppc.c (parse_cpu): Preserve the settings of the
- PPC_OPCODE_ALTIVEC and PPC_OPCODE_SPE flags.
-
-2008-01-03 H.J. Lu <hongjiu.lu@intel.com>
-
- * config/tc-i386.c (md_assemble): Use !intel_mnemonic instead
- of SYSV386_COMPAT.
-
-2008-01-03 H.J. Lu <hongjiu.lu@intel.com>
-
- * gas/config/tc-i386.c (cpu_arch_flags_not): Removed.
- (cpu_flags_not): Likewise.
- (cpu_flags_match): Updated to check 64bit and arch.
- (set_code_flag): Remove cpu_arch_flags_not.
- (set_16bit_gcc_code_flag): Likewise.
- (set_cpu_arch): Likewise.
- (md_begin): Likewise.
- (parse_insn): Call cpu_flags_match to check 64bit and arch.
- (match_template): Likewise.
-
-2008-01-03 Jakub Jelinek <jakub@redhat.com>
-
- * config/tc-i386.c (process_drex): Initialize modrm_reg and
- modrm_regmem to 0 instead of None.
-
-2008-01-03 H.J. Lu <hongjiu.lu@intel.com>
-
- * config/tc-i386.c (match_template): Use the xmmword field
- instead of no_xsuf.
-
-2008-01-02 H.J. Lu <hongjiu.lu@intel.com>
-
- * config/tc-i386.c (process_suffix): Fix a typo.
-
-2008-01-02 H.J. Lu <hongjiu.lu@intel.com>
-
- PR gas/5534
- * config/tc-i386.c (match_template): Handle XMMWORD_MNEM_SUFFIX.
- Check memory size in Intel mode.
- (process_suffix): Handle XMMWORD_MNEM_SUFFIX.
- (intel_e09): Likewise.
-
- * config/tc-i386.h (XMMWORD_MNEM_SUFFIX): New.
-
-2008-01-02 Catherine Moore <clm@codesourcery.com>
-
- * config/tc-mips.c (mips_ip): Check operands on jalr instruction.
-
-For older changes see ChangeLog-2007
+For older changes see ChangeLog-2008
\f
Local Variables:
mode: change-log
projects / deliverable / binutils-gdb.git / blobdiff