+Tue Dec 2 17:05:13 1997 Nick Clifton <nickc@cygnus.com>
+
+ * config/tc-v850.c: Brought up to date with the branch.
+
+Mon Dec 1 20:24:18 1997 J"orn Rennecke <amylaar@cygnus.co.uk>
+
+ * config/tc-sh.c (SWITCH_TABLE_CONS): Handle (fix)->fx_size == 1.
+ (SWITCH_TABLE): Handle BFD_RELOC_8.
+ (md_apply_fix): #ifndef BFD_ASSEMBLER code: Handle fixP->fx_size == 1.
+ (coff_reloc_map): Add BFD_RELOC_8_PCREL entry.
+ (sh_coff_reloc_mangle): SWITCH_TABLE case: Handle BFD_RELOC_8.
+
+Sat Nov 22 16:19:22 1997 Richard Henderson <rth@cygnus.com>
+
+ * tc-alpha.c (range_signed_16, range_signed_32): Work around an
+ apparent bug in gcc's long long support crossing from x86.
+
+Sat Nov 22 14:26:09 1997 Nick Clifton <nickc@cygnus.com>
+
+ * config/tc-arm.c: Brought up to date with latest changes on arm
+ branch.
+
+Sat Nov 22 15:50:09 1997 Klaus Kaempf <kkaempf@progis.de>
+
+ * config-gas.com: Get version info from configure.in.
+
+ * makefile.vms: include depend.obj in OBJS.
+
+ * config/tc-alpha.c (s_alpha_section): Remove ".lcomm" handling.
+
+ * config/tc-alpha.c (alpha_basereg_clobbered): Remove variable and
+ all corresponding code.
+
+Thu Nov 20 15:06:08 1997 Richard Earnshaw <rearnsha@arm.com>
+
+ * config/tc-arm.h (TARGET_FORMAT for generic a.out targets): Allow
+ run-time endian selection.
+
+start-sanitize-sh4
+Wed Nov 19 17:44:42 1997 Richard Henderson <rth@cygnus.com>
+
+ * tc-sh.c (parse_reg): Properly quote for fv4.
+
+end-sanitize-sh4
+Wed Nov 19 23:46:18 1997 Ian Lance Taylor <ian@cygnus.com>
+
+ * symbols.c (resolve_symbol_value): Add missing breaks in case on
+ symbol value operator.
+
+start-sanitize-vr5400
+Wed Nov 19 02:24:07 1997 Ken Raeburn <raeburn@cygnus.com>
+
+ * config/tc-mips.c (gpr_interlocks, cop_interlocks): VR5400 has
+ these.
+
+end-sanitize-vr5400
+Tue Nov 18 18:45:14 1997 J"orn Rennecke <amylaar@cygnus.co.uk>
+
+ * config/tc-d10v.c (parallel_ok, find_opcode):
+ Split OPERAND_FLAG into OPERAND_FFLAG and OPERAND_CFLAG.
+
+Sun Nov 16 10:05:07 1997 Fred Fish <fnf@cygnus.com>
+
+ * config/obj-coff.c (fixup_segment): Cast second arg of
+ md_apply_fix3 call to type "valueT *".
+
+Thu Nov 13 13:53:10 1997 Andrew Cagney <cagney@b1.cygnus.com>
+
+ * configure.in (emulations): Make FreeBSD an aout / i386bsd
+ variant.
+ * configure: Re-generate.
+
+Thu Nov 13 11:07:14 1997 Gavin Koch <gavin@cygnus.com>
+
+ * config/tc-mips.c (macro_build): Use the membership field
+ for INSN_MACRO's.
+ (mips_ip): Same.
+
+Thu Nov 13 02:04:55 1997 J"orn Rennecke <amylaar@cygnus.co.uk>
+
+ * config/tc-d10v.c (find_opcode): For OPCODE_FAKE, add check for
+ first argument if it's supposed to be a register.
+
+start-sanitize-tx49
+Wed Nov 12 10:06:27 1997 Gavin Koch <gavin@cygnus.com>
+
+ * config/tc-mips.c (mips_4900): Added.
+ (hilo_interlocks): Added mips_4900.
+ (md_begin): Set default for mips_4900.
+ (macro_build,mips_ip): Test for INSN_4900 if mips_4900.
+ (md_longopts): Add "m4900" and "no-m4900".
+ (md_parse_option): Handle above options.
+
+end-sanitize-tx49
+Tue Nov 11 19:25:05 1997 J"orn Rennecke <amylaar@cygnus.co.uk>
+
+ * app.c (do_scrub_chars): If d10v, re-insert a space before
+ a '#' when in state 10.
+
+Tue Nov 11 13:33:15 1997 Ian Lance Taylor <ian@cygnus.com>
+
+ * config/tc-h8300.c: Include "subsegs.h".
+ (tc_reloc_mangle): Handle references to symbols which are not
+ being output, so that references to `.' work.
+
+Mon Nov 10 13:43:33 1997 Ian Lance Taylor <ian@cygnus.com>
+
+ * config/tc-m68k.c (m68k_ip): Call add_fix when needed for '_'
+ case.
+
+ * macro.c (sub_actual): If we don't find a parameter for an &,
+ just substitute &.
+
+Fri Nov 7 21:29:32 1997 Ken Raeburn <raeburn@cygnus.com>
+start-sanitize-vr5400
+
+ * config/tc-mips.c (mips_ip): Added cases for "e", "%", and "P"
+ operand types.
+ (hilo_interlocks): VR5400 has interlocks.
+ (md_begin): Expect mips64vr5400, not mips64r5400.
+end-sanitize-vr5400
+
+ * config/tc-mips.c (mips_ip): In default case, call as_bad
+ instead of fprintf, to get "assembler messages:" message output
+ before instead of after.
+
+Fri Nov 7 10:36:22 1997 Doug Evans <devans@canuck.cygnus.com>
+
+ * frags.h: Handle multiple inclusion.
+
+Wed Nov 5 10:51:49 1997 Doug Evans <devans@canuck.cygnus.com>
+
+ Based on a patch from Ian.Dall@dsto.defence.gov.au.
+ * as.h (struct frag, frag support): Moved from here.
+ * frags.h: To here.
+ (struct frag, member tc_frag_data): New member if TC_FRAG_TYPE
+ is defined.
+ (struct frag, member fr_cgen): Renamed from fr_targ.cgen.
+ * cgen.c (cgen_asm_finish_insn): Update.
+ * config/tc-m32r.c (md_estimate_size_before_relax): Update.
+ * config/tc-m32r.h (TC_FRAG_INIT): Renamed from md_init_frag.
+ (md_convert_frag): Ditto.
+ * config/tc-ns32k.h (TC_FRAG_TYPE): Define.
+ (frag_opcode_frag,frag_opcode_offset,frag_bsr): Update.
+ (TC_FRAG_INIT): Update.
+
+Tue Nov 4 16:35:57 1997 Ian Dall <Ian.Dall@dsto.defence.gov.au>
+
+ * write.c (print_fixup): Use TC_FIX_DATA_PRINT (if defined) to
+ print out MD fields of fix.
+ * frags.c (frag_var, frag_variant): Use TC_FRAG_INIT macro (if
+ defined) to initialize MD fields in frag.
+ * as.h (struct frag, ns32k support): Rename ns32k to fr_ns32k.
+ Delete pcrel_adjust. Add fr_opcode_fragP, fr_opcode_offset.
+ * config/tc-ns32k.h: Add comments. Remove obsolete
+ BFD_FAST_SECTION_FILL definition, change prototypes for
+ fix_new_ns32k and fix_new_ns32k_exp to add new arguments
+ opcode_frag and opcode_offset and remove pcrel_adjust.
+ (TC_FIX_TYPE): add opcode_fragP and opcode_offset fields.
+ (TC_FIX_DATA_PRINT): new macro to print out TC_FIX_TYPE.
+ (TC_FRAG_INIT): new macro to initialize machine dependent field in
+ frags.
+ (frag_opcode_frag, frag_opcode_offset, frag_bsr): macros to access
+ MD fields in frag structure.
+ (fix_im_disp, fix_bit_fixP, fix_opcode_frag, fix_opcode_offset,
+ fix_bsr): macros to access MD fields in fix structure.
+ * config/tc-ns32k.c: Avoid overlength lines. Align comments. Don't
+ use struct opcode_location as these fields are now in the frag
+ structure.
+ (convert_iif): Call frag_more as it is needed instead
+ of trying to allocate for the whole insn. Avoid call of frag_more
+ with negative argument.
+ (md_pcrel_adjust, md_fix_pcrel_adjust, md_apply_fix,
+ md_estimate_size_before_relax, md_pcrel_from,
+ tc_aout_fix_to_chars): use accessor macros to get md fields in fix
+ and frag structures.
+ (fix_new_ns32k, fix_new_ns32k_exp): add new arguments opcode_frag and
+ opcode_offset and remove pcrel_adjust.
+ (convert_iif, cons_fix_new_ns32k): call fix_new_ns32k,
+ fix_new_ns32k_exp with changed arguments.
+
+Mon Nov 3 13:30:17 1997 Gavin Koch <gavin@cygnus.com>
+
+ * tc-mips.c (md_begin): Reorganize setting of default values so
+ that mips_cpu depends on TARGET_CPU, and mips_opts.isa depends on
+ mips_cpu.
+ (md_parse_option): Remove all code that sets defaults; md_begin
+ handles all of this now.
+
+Sun Nov 2 14:46:09 1997 Ian Lance Taylor <ian@cygnus.com>
+
+ * Makefile.am (STAGESTUFF): Change bin_PROGRAMS to
+ noinst_PROGRAMS.
+ (bootstrap, bootstrap2, bootstrap3): Likewise.
+ * Makefile.in: Rebuild.
+
+ * config/tc-ppc.c (ppc_fix_adjustable): Don't adjust relocs in the
+ TOC section to be against the csect.
+
+Fri Oct 31 18:19:55 1997 Ken Raeburn <raeburn@cygnus.com>
+
+start-sanitize-vr5400
+ * config/tc-mips.c (mips_5400): New variable.
+ (md_begin, md_parse_option): Handle 5400 options/names.
+ (macro_build, mips_ip): Check for 5400-specific instructions.
+ (md_longopts, OPTION_M5400, OPTION_NO_M5400): More command-line
+ support for 5400.
+
+end-sanitize-vr5400
+ * config/tc-mips.c (validate_mips_insn): New function, checks
+ match versus mask bits, and also verifies that all bits to be
+ output are actually specified somewhere.
+ (md_begin): Call it for 32-bit instructions, instead of doing
+ match/mask check here. In case of failure, print a message, but
+ check the rest of the opcode table before exiting.
+
+Thu Oct 30 13:46:20 1997 Nick Clifton <nickc@cygnus.com>
+
+ * config/tc-arm.c (md_apply_fix3): Fix thumb ADR pseudo op. Patch
+ from Tony Thompson at ARM: athompso@arm.com
+
+start-sanitize-d30v
+Thu Oct 30 11:11:26 1997 Michael Meissner <meissner@cygnus.com>
+
+ * config/tc-d30v.c (build_insn): Allow odd registers for ld2w and
+ friends.
+
+end-sanitize-d30v
+start-sanitize-tx49
+Wed Oct 29 16:22:38 1997 Gavin Koch <gavin@cygnus.com>
+
+ * config/tc-mips.c (hilo_interlocks): True for tx49.
+ (md_begin): Add mips64tx49.
+ (md_parse_option): Add 4900 cpu.
+
+end-sanitize-tx49
+Fri Oct 24 15:56:47 1997 Ian Lance Taylor <ian@cygnus.com>
+
+ * config/tc-ppc.c (md_assemble): When handling @l, always sign
+ extend if the operand expects a signed value.
+
+ * config/tc-mips.h (LOCAL_LABELS_DOLLAR): Don't define; use
+ default which is to permit dollar labels.
+
+Fri Oct 24 11:19:22 1997 Jakub Jelinek <jj@sunsite.mff.cuni.cz>
+
+ * config/tc-sparc.c (sparc_memory_model): New variable.
+ (md_longopts): Add -TSO/-PSO/-RMO options.
+ (md_parse_options): Handle them.
+ (sparc_elf_final_processing): For 64 ELF, set required
+ memory ordering in e_flags. Default to RMO and let the user
+ override it through command line.
+
+ * config/tc-sparc.h (elf_tc_final_processing): Add.
+
+Wed Oct 22 17:42:12 1997 Richard Henderson <rth@cygnus.com>
+
+ * config/tc-sparc.c (v9a_asr_table): New variable.
+ (sparc_ip): Handle v9a asr's.
+ Patch from David Miller <davem@vger.rutgers.edu>.
+
+Wed Oct 22 17:22:59 1997 Richard Henderson <rth@cygnus.com>
+
+ * config/tc-sparc.h (md_do_align): New macro.
+ * config/tc-sparc.c (sparc_handle_align): Handle rs_align_code.
+ Patch from Jakub Jelinek <jj@sunsite.mff.cuni.cz>.
+
+Wed Oct 22 12:51:18 1997 Ian Lance Taylor <ian@cygnus.com>
+
+ * config/tc-sh.c (sh_small): New variable.
+ (OPTION_SMALL): Define.
+ (md_longopts): Add "small".
+ (md_parse_option): Handle OPTION_SMALL.
+ (md_show_usage): Mention -small.
+ * config/tc-sh.h (sh_small): Declare.
+ (SUB_SEGMENT_ALIGN): Handle sh_small.
+ * config/obj-coff.h (TARGET_FORMAT): Check sh_small in TC_SH
+ case.
+
+ * config/tc-mips.c (macro): Correct handling of constant in M_LI_D
+ case in little endian mode.
+
+Tue Oct 21 10:20:11 1997 Doug Evans <devans@canuck.cygnus.com>
+
+ * config/tc-sparc.c (md_apply_fix3, cases ..._H44, ..._HIX22): Leave
+ overflow signalling to linker.
+
+Mon Oct 20 14:54:06 1997 Klaus K"ampf <kkaempf@progis.de>
+
+ * makefile.vms: Fix for dec c.
+
+ * config-gas.com: Give explanation for dec c setup in error
+ message.
+
+ * config/tc-alpha.c (s_alpha_comm): Make .comm symbols separate
+ sections on openvms/alpha.
+
+ * config/obj-evax.c: support .weak pseudo-op
+
+Mon Oct 20 10:13:32 1997 Doug Evans <devans@canuck.cygnus.com>
+
+ * config/tc-sparc.c (default_arch_size): New static local.
+ (struct sparc_arch): Rename arch_size to default_arch_size.
+ New member user_option_p.
+ (sparc_arch_table): Always include v9, v9a. New entry v9-64.
+ (init_default_arch): Check whether default arch is valid.
+ Set default_arch_size in addition to sparc_arch_size.
+ (OPTION_32,OPTION_64): Define.
+ (md_longopts): New entries for -32, -64.
+ (md_parse_option): Handle them.
+ (md_show_usage): Print them. Ensure init_default_arch called.
+ * configure.in (sparc64): Set arch to v9-64.
+ * configure: Regenerated.
+
+Sun Oct 19 13:50:50 1997 Ian Lance Taylor <ian@cygnus.com>
+
+ * write.c (subsegs_finish): New function, broken out of
+ write_object_file.
+ (write_object_file): Some code moves into subsegs_finish.
+ * write.c (subsegs_finish): Declare.
+ * as.c (main): Call subsegs_finish.
+
+ * read.c (s_include): Check for error return from
+ demand_copy_string.
+
+Tue Oct 14 20:50:58 1997 Richard Henderson <rth@cygnus.com>
+
+ * read.c (get_line_sb): Accept any eol marker while scanning macros.
+
+Tue Oct 14 19:12:45 1997 Richard Henderson <rth@cygnus.com>
+
+ * config/tc-alpha.h (DIFF_EXPR_OK): Define.
+ * config/tc-i386.h (DIFF_EXPR_OK): Define.
+ * config/tc-alpha.c (md_apply_fix): Notice fx_pcrel and substitute
+ the correct relocation when it exists.
+ * config/tc-i386.c (md_apply_fix3): Likewise.
+
+ * config/tc-ppc.h: Correct typo in comment.
+ * config/tc-v850.h: Likewise.
+
+Fri Oct 10 16:09:35 1997 Andrew Cagney <cagney@b1.cygnus.com>
+
+ * config/tc-d10v.c (parallel_ok): Allow parallel instruction issue
+ when second instruction is writing to first instructions inputs.
+
+Mon Oct 13 15:27:17 1997 Richard Henderson <rth@cygnus.com>
+
+ * ecoff.c (PAGE_SIZE): Double to 8k as a hack to allow some C++
+ templated programs to build with -g.
+
+Fri Oct 10 17:48:29 1997 Nick Clifton <nickc@cygnus.com>
+
+ * config/tc-v850.c (md_relax_table): Add support for relaxing
+ unconditional branches. This patch is courtesy of Jim Wilson.
+ (md_convert_frag): Fix relaxing of branches. This patch is
+ courtesy of Jim Wilson.
+ (md_assemble): Create different fixups for conditional and
+ unconditional branches. This patch is courtesy of Jim Wilson.
+ (md_estimate_size_before_relax): Estimate size of variable part of
+ fixup based on whether it is for a conditional or an unconditional
+ branch. This patch is courtesy of Jim Wilson.
+ (v850_sdata, v850_tdata, v850_zdata, v850_sbss, v850_tbss,
+ v850_zbss, v850_rosdata, v850_rozdata, v850_bss): Add call to
+ obj_elf_section_change_hook().
+ (v850_comm): New function.
+ (md_pseudo_table): Add new pseudo ops .zcomm, .scomm and .tcomm.
+ (md_begin): Add bss flag to seg_info of bss sections.
+
+ Add support for .scommon, .tcommon and .zcommon sections.
+
+ * config/tc-v850.h (ELF_TC_SPECIAL_SECTIONS): Add .scommon,
+ .zcommon, .tbss, .call_table_data and .call_table_text.
+
+Fri Oct 10 15:01:14 1997 Doug Evans <dje@canuck.cygnus.com>
+
+ * configure.in (sparc): Set DEFAULT_ARCH from correct target.
+ * configure: Regenerated.
+
+Fri Oct 10 11:22:45 1997 Martin M. Hunt <hunt@cygnus.com>
+
+ * config/tc-d10v.c: Fixes to make sure the AT_WORD
+ expression is not confused with -1.
+
+Fri Oct 10 11:54:50 1997 Andrew Cagney <cagney@b1.cygnus.com>
+
+ * config/tc-d10v.c (parallel_ok): Flag SP as modified for @-sp
+ operand - OPERAND_ATMINUS.
+
+Fri Oct 10 00:47:44 1997 Michael Meissner <meissner@cygnus.com>
+
+ * config/tc-d10v.c (parallel_ok): Note that auto increment and
+ decrement modify the index register.
+
+Thu Oct 9 15:17:50 1997 Ian Lance Taylor <ian@cygnus.com>
+
+ From Robin Kirkham <Robin.Kirkham@mlb.dmt.csiro.au>:
+ * config/tc-m68k.c (archs): Add 68306, 68307, 68322, 68356, 68334,
+ 68336, 68341, 68349.
+ * doc/c-m68k.texi (M68K-Opts): Add -m68ec000 -m68hc000 -m68hc001
+ -m68306, -m68307, -m68322, -m68356, -m68ec020, -m68ec030,
+ -m68ec040, -m68ec060, -m68330, -m68334, -m68336, -m68341,
+ -m68349.
+
+ * doc/Makefile.am (CPU_DOCS): Define.
+ (as.info): Depend upon $(CPU_DOCS).
+ * doc/Makefile.in: Rebuild.
+
+ * configure.in: Remove AM_PROG_INSTALL; it's called by
+ AM_INIT_AUTOMAKE.
+ * configure: Rebuild.
+
+Thu Oct 9 01:44:36 1997 J"orn Rennecke <amylaar@cygnus.co.uk>
+
+ * tc-d10v.h (TC_START_LABEL): Don't define.
+ (tc_frob_label): Define.
+
+Thu Oct 9 00:07:23 1997 J"orn Rennecke <amylaar@cygnus.co.uk>
+
+ * config/tc-d10v.c (write_2_short): Fix bug that wouldn't allow
+ to pair a branch and link with anything but an exe instruction.
+
+Wed Oct 8 16:28:53 1997 Richard Henderson <rth@cygnus.com>
+
+ * config/tc-alpha.c (load_expression): Disable the sym+const .got
+ optimization to reduce the alignment surprises for gcc.
+
+Wed Oct 8 16:11:15 1997 Doug Evans <dje@canuck.cygnus.com>
+
+ * config/obj-coff.h (TC_SPARC): Don't define TARGET_FORMAT.
+ * config/tc-sparc.c (sparc_target_format): Handle coff here.
+ (sparc_ip): Add %hix,%lox.
+ (md_apply_fix3): Call as_bad_where, not as_bad.
+ Add support for BFD_RELOC_SPARC_{HIX22,LOX10}.
+ (tc_gen_reloc): Add support for BFD_RELOC_SPARC_{HIX22,LOX10}.
+
+Wed Oct 8 12:33:32 1997 Richard Henderson <rth@cygnus.com>
+
+ * configure.in: Change alpha-*-* to alpha*-*-*; config.guess now
+ recognizes alphaev5 etc.
+ * configure: Rebuild.
+
+Wed Oct 8 00:04:05 1997 Gavin Koch <gavin@cygnus.com>
+
+ * config/tc-mips.c (md_begin): Replace the TARGET_CPU value
+ of mipsr3900 with mipstx39.
+
+ * config/tc-mips.c (mips_ip): Don't print the 'opcode requires
+ -mipsXX message' if the insn isn't an ISA insn.
+
+Tue Oct 7 12:48:30 1997 Doug Evans <dje@canuck.cygnus.com>
+
+ * config/tc-sparc.h (TARGET_FORMAT support): Moved to tc-sparc.c.
+ Redefine TARGET_FORMAT to call sparc_target_format.
+ * config/tc-sparc.c (in_unsigned_range): New function.
+ (sparc_arch_size): Make static.
+ (sparc_target_format): New function.
+ (sparc_ip): Delete variable immediate_max. Rewrite %hi/etc reloc
+ handling. Add support for %hh,%hm,%lm,%h44,%m44,%l44.
+ (output_insn): Set `fx_no_overflow'.
+ (md_apply_fix3): Handle BFD_RELOC_SPARC_{7,H44,M44,L44}.
+ (tc_gen_reloc): Likewise.
+
+Mon Oct 6 14:04:50 1997 Nick Clifton <nickc@cygnus.com>
+
+ * config/tc-v850.c (v850_section): Remove.
+
+ * config/obj-elf.c (obj_elf_section): Enhance error message.
+
+Fri Oct 3 15:40:38 1997 Ian Lance Taylor <ian@cygnus.com>
+
+ * config/tc-mips.c: Undef OBJ_COPY_SYMBOL_ATTRIBUTES before
+ including obj-elf.h in OBJ_MAYBE_ELF case.
+ (mips_target_format): Return NULL after abort to avoid warning.
+
+ * ecoff.c (generate_ecoff_stab): Remove unused static function.
+
+ * expr.c (operator): Accept ==. From Anders Blomdell
+ <anders.blomdell@control.lth.se>.
+
+ * config/atof-ieee.c (gen_to_words): When generating a denormal
+ number, handle an overflow into the smallest normalized number.
+
+Mon Sep 29 15:24:52 1997 J"orn Rennecke <amylaar@cygnus.co.uk>
+
+ * as.h, input-scrub.c (new_logical_line): New return value.
+ * read.c (s_app_file): Don't note the same file several times
+ in a row.
+
+Thu Sep 25 13:08:02 1997 Ian Lance Taylor <ian@cygnus.com>
+
+ * config/tc-m68k.c (m68k_ip): Remove ` operand specifier.
+
+Wed Sep 24 16:54:40 1997 Joel Sherrill <joel@oarcorp.com>
+
+ * configure.in (sh*-*-rtems*): New target, like sh-*-elf*.
+ * configure: Rebuild.
+
+Wed Sep 24 11:30:25 1997 Ian Lance Taylor <ian@cygnus.com>
+
+ * config/tc-m68k.c (m68k_ip): Handle q and v operand specifiers.
+
+ * doc/c-i386.texi (i386-Float): Remove incorrect assertion that
+ fn* instructions do not insert implicit fwait. This was changed
+ Jan 29, 1996.
+
+ * config/m68k-parse.y (yylex): Permit an expression to be used for
+ the scale factor.
+
+ * Makefile.am (EXTRA_as_new_SOURCES): Set to config/m68k-parse.y,
+ not m68k-parse.y.
+ * Makefile.in: Rebuild.
+
+ * aclocal.m4: Rebuild with new libtool.
+ * configure: Rebuild.
+
+Tue Sep 23 17:48:09 1997 Ian Lance Taylor <ian@cygnus.com>
+
+ * app.c (do_scrub_chars): Clear mri_state at end of .mri
+ pseudo-op.
+
+ * config/tc-mips.c (hilo_interlocks): Change from a static
+ variable to a macro, so that it varies with the variables upon
+ which it depends.
+ (gpr_interlocks, cop_interlocks): Likewise.
+ (md_begin): Don't initialize them.
+
+Fri Sep 19 17:08:41 1997 Jeffrey A Law (law@cygnus.com)
+
+ * config/tc-mn10300.c (md_assemble): Use strcasecomp instead
+ of strcmp where appropriate.
+
+Thu Sep 18 14:11:56 1997 Nick Clifton <nickc@cygnus.com>
+
+ * config/tc-v850.c (md_assemble): Cope with a zero data area
+ relocation with a constant offset.
+ (md_assemble): Produce error message when special data area
+ relocations are used on instructions which do not support them.
+ (md_assemble): Reset processor mask if defined by command line
+ switch.
+
+Thu Sep 18 11:24:01 1997 Doug Evans <dje@canuck.cygnus.com>
+
+ * config/tc-sparc.c: Reorganize file.
+ (parse_keyword_arg): Allow numbers in reg names.
+ (SPECIAL_CASE_NONE): New macro.
+ (md_assemble): Use it.
+ (lookup_arch,init_default_arch): New functions.
+ (default_arch,default_init_p,sparc_arch_table): New static locals.
+ (sparc_arch_size): New static local.
+ (max_architecture): Initialize in init_default_arch.
+ (md_parse_options): Call init_default_arch if necessary.
+ Rewrite -xarch/-A processing.
+ (md_show_usage): Print -A values from sparc_arch_table.
+ (md_begin): Call init_default_arch if necessary.
+ (sparc_md_end): Handle both 32 and 64 bit environments.
+ * config/tc-sparc.h (TARGET_FORMAT): Likewise.
+ * acconfig.h (SPARC_V9,SPARC_ARCH64): Delete.
+ (DEFAULT_ARCH): Add.
+ * config.in: Regenerate.
+ * configure.in (sparc): Default DEFAULT_ARCH based on target cpu.
+ (SPARC_V9,SPARC_ARCH64): Delete.
+ * configure: Regenerate.
+ * config/vms-conf.h (SPARC_V9,SPARC_ARCH64): Delete.
+
+Wed Sep 17 16:54:20 1997 Nick Clifton <nickc@cygnus.com>
+
+ * config/tc-v850.c (v850_reloc_prefix): Recoded to use CHECK_ ()
+ macro.
+ (handle_tdaoff, handle_zdaoff, handle_sdaoff): New functions.
+start-sanitize-v850e
+
+ * config/tc-v850.c (md_assemble): Corrected typo.
+ * config/tc-v850.c Add new sections: call_table_data and
+ call_table_text.
+ (v850_reloc_prefix): Add support for ctoff() relocation prefix.
+ (handle_ctoff): New Function.
+
+ * doc/c-v850.texi (V850 Opcodes): Document call table relocations.
+end-sanitize-v850e
+
+Tue Sep 16 14:18:22 1997 Nick Clifton <nickc@cygnus.com>
+
+ * config/tc-v850.c (v850_reloc_prefix): Add support for a 16 bit
+ displacement from the tiny data area pointer.
+
+Mon Sep 15 21:28:09 1997 Jeffrey A Law (law@cygnus.com)
+
+ * config/tc-hppa.c (fix_new_hppa): Make declaration match
+ definition.
+
+Mon Sep 15 18:33:06 1997 Nick Clifton <nickc@cygnus.com>
+
+ * config/tc-v850.c (processor_mask): New variable.
+ (set_machine, md_parse_option): Set processor_mask.
+ (md_assemble): Check that instruction is available to target
+ processor.
+
+ * config/tc-v850.h (TARGET_PROCESSOR): New constant.
+start-sanitize-v850e
+ (TARGET_PROCESSOR): New constant.
+ (TARGET_PROCESSOR): New constant.
+end-sanitize-v850e
+
+start-sanitize-tx19
+Mon Sep 15 17:26:46 1997 Gavin Koch <gavin@cygnus.com>
+
+ * config/tc-mips.c (mips_1900): Replace with mips_3900 and
+ mips16.
+
+end-sanitize-tx19
+start-sanitize-d30v
+Mon Sep 15 11:28:04 1997 Ken Raeburn <raeburn@cygnus.com>
+
+ Merge in work from Martin Hunt:
+
+ * config/tc-d30v.c (build_insn): For mvfsys and mvtsys,
+ CR is 0 for PSWL and PSWH.
+
+ * config/tc-d30v.c (do_assemble): Don't accept
+ illegal condition codes for cmpu instruction.
+
+ * config/tc-d30v.c: Add support for BFD_RELOC_D30V_9_PCREL
+ used in d*i instructions.
+
+ * config/tc-d30v.c (check_size): New function. Check
+ relocations for overflows.
+ (md_pcrel_from_section): Fix relocations between sections.
+ (md_apply_fix3): Use new relocation types for 15 and 21
+ bit relocations in the right container. Needed because
+ the address of the instruction is not eight-byte aligned
+ but the relocations must be.
+
+ * config/tc-d30v.c (md_apply_fix3): Check for overflow.
+ (find_format): If ".s" or ".l" are used, don't try
+ to compute branch sizes.
+
+ * config/tc-d30v.c (do_assemble): Check for ".s" or
+ ".l" extensions to opcode names.
+ (find_format): Generate the correct instructions when
+ ".s" or ".l" are used.
+
+ * config/tc-d30v.c (build_insn): Check for odd registers
+ on instructions that require even registers.
+
+ * config/tc-d30v.h (md_start_line_hook): Define.
+ * config/tc-d30v.c (md_start_line_hook): New hook.
+ Checks the beginning of each line for a ".". If it
+ finds one, assume a pseudo-op and flush any unwritten
+ instructions.
+
+ * config/tc-d30v.c (md_apply_fix3): Fix problem
+ with determining when fixups were done.
+
+ * config/tc-d30v.c (build_insn): Fix bug where the numeric
+ part of a symbol (for example, "foo+8") was being written
+ into the instruction.
+ (md_pseudo_table): Change .word to be 32 bits and add
+ .hword as 16 bits.
+
+ * config/tc-d30v.c (parallel_ok): Check to see if first
+ instruction is a jump.
+
+ * config/tc-d30v.c (parallel_ok): Major code reorganization.
+
+end-sanitize-d30v
+Wed Sep 10 10:07:08 1997 Nick Clifton <nickc@cygnus.com>
+
+start-sanitize-v850e
+ * config/tc-v850.c (md_assemble): Corrected spelling mistake.
+end-sanitize-v850e
+ * configure.in (emulations): Add v850 emulation.
+
+Tue Sep 9 17:14:33 1997 Doug Evans <dje@canuck.cygnus.com>
+
+ * Makefile.am (CPU_TYPES): Add arc.
+ (TARGET_CPU_CFILES): Add tc-arc.c.
+ (TARGET_CPU_HFILES): Add tc-arc.h.
+ (dependencies): Rebuild.
+ * Makefile.in: Rebuild.
+ * configure.in: Recognize arc-*-elf*.
+ * configure: Regenerated.
+ * config/tc-arc.[ch]: New files.
+
+Tue Sep 9 10:19:37 1997 Nick Clifton <nickc@cygnus.com>
+
+ * doc/c-v850.texi (V850 Opcodes): Document hi0() reloc prefix.
+ Correct description of hi() reloc prefix.
+
+start-sanitize-v850e
+ * doc/c-v850.texi (V850 Opcodes): Document new reloc prefix.
+ * config/tc-v850.c (v850_reloc_prefix): Add hilo() reloc prefix.
+ * config/tc-v850.c (md_assemble): Add support for BFD_RELOC_32.
+end-sanitize-v850e
+
+ * doc/c-v850.texi: Document new pseudo ops and command line
+ options.
+
+ * config/tc-v850.c (set_machine): New function.
+ * config/tc-v850.c (.v850): New pseudo op.
+start-sanitize-v850e
+ * config/tc-v850.c (.v850e): New pseudo op.
+ * config/tc-v850.c (.v850eq): New pseudo op.
+end-sanitize-v850e
+
+
+Mon Sep 8 23:08:04 1997 Ian Lance Taylor <ian@cygnus.com>
+
+ Support -alh and -ald for DWARF 1:
+ * listing.c (struct list_info_struct): Add debugging field.
+ (listing_newline): Initialize the debugging field. If ELF, if the
+ section starts with .debug or .line, set the debugging field in
+ the listing structure.
+ (debugging_pseudo): Add list parameter. Change all callers. If
+ the debugging field is set, consider it to be a debugging pseudo.
+ If ELF, skip blank lines between debugging lines.
+ * read.c (emit_expr): If ELF, look for line numbers.
+ (stringer): If ELF, look for file names.
+
+Mon Sep 8 12:33:40 1997 Nick Clifton <nickc@cygnus.com>
+
+ * config/tc-v850.c (v850_insert_operand): Only test for overflow
+ if there is no insert function.
+
+ * config/tc-v850.h (TARGET_MACHINE): New constant.
+
+ * config/tc-v850.c (v850_insert_operand): Add
+ -mwarn_unsigned_overflow.
+ (md_begin): Set BFD machine number based on machine variable.
+ (md_parse_option): Add -mv850, -mv850e and -mv850eq options.
+
+Mon Sep 8 11:20:46 1997 Ian Lance Taylor <ian@cygnus.com>
+
+ * as.h: Don't declare alloca if it is a macro.
+ * macro.c: Likewise.
+
+start-sanitize-tx19
+Sun Sep 7 16:04:53 1997 Gavin Koch <gavin@cygnus.com>
+
+ * config/tc-mips.c: Add tx19/r1900.
+
+end-sanitize-tx19
+Sun Sep 7 00:30:19 1997 Richard Henderson <rth@cygnus.com>
+
+ * config/tc-alpha.c (md_parse_option): Move m[] out to top level and
+ rename to cpu_types[].
+ (s_alpha_arch): New function.
+ (md_pseudo_table): Add "arch".
+
+ * config/tc-alpha.c (md_begin): Merge the two loops through the
+ opcode table.
+ (s_alpha_proc): Add initial SKIP_WHITESPACE.
+ (s_alpha_set): Likewise. Use get_symbol_end instead local while loop.
+
+Sat Sep 6 19:38:12 1997 Fred Fish <fnf@ninemoons.com>
+
+ * read.h (s_lcomm_bytes): Add prototype (for real this time).
+
+Thu Sep 4 12:10:01 1997 Ian Lance Taylor <ian@cygnus.com>
+
+ * config/obj-elf.c (elf_frob_symbol): Only set BSF_OBJECT for
+ symbols on Irix.
+
+Wed Sep 3 11:21:33 1997 Nick Clifton <nickc@cygnus.com>
+
+ * config/tc-v850.c: Remove BFD_RELOC_V850_16_PCREL.
+
+Tue Sep 2 18:32:30 1997 Jeffrey A Law (law@cygnus.com)
+
+ * config/tc-mn10200.c (md_convert_frag): PC relative instructions arex
+ relative to the next instruction, not the current instruction.
+ (md_assemble): Similarly.
+
+Tue Sep 2 15:58:52 1997 Nick Clifton <nickc@cygnus.com>
+
+ * doc/c-v850.texi: Explanations of offsets in SDA/ZDA areas
+ correcetd.
+
+ * config/tc-v850.c: Add support for SDA/TDA/ZDA sections.
+ (v850_reloc_prefix): Duplicate code eliminated. Add code to
+ recognise special instructions.
+ (md_assemble): Calculation of the size of a fixups corrected.
+
+ * config/tc-v850.h (ELF_TC_SPECIAL_SECTIONS): Add SDA/TDA/ZDA
+ sections.
+
+Tue Sep 2 15:40:56 1997 Andrew Cagney <cagney@b1.cygnus.com>
+
+ * config/tc-v850.c (md_assemble): Use opcode->name instead of
+ opcode->opcode as the sentinal. Zero is a valid opcode.
+
+Tue Aug 26 16:51:14 1997 Ian Lance Taylor <ian@cygnus.com>
+
+ * doc/as.texinfo (Machine Dependencies): Add v850 to menu.
+ * doc/c-v850.texi: Change node name to match other chapter nodes.
+
+Tue Aug 26 09:46:22 1997 Nick Clifton <nickc@cygnus.com>
+
+ * doc/c-v850.texi (V850 Opcodes): Correct name for tiny data area
+ pointer.
+
+Tue Aug 26 12:23:25 1997 Ian Lance Taylor <ian@cygnus.com>
+
+ * expr.c (integer_constant): If BFD64, don't make a bignum if the
+ number will fit in 64 bits.
+
+ * config/tc-alpha.c (load_expression): Check explicitly for O_big,
+ rather than calling abort.
+
+ * as.h: Don't define alloca if __GNUC__. Just declare it.
+ * macro.c: Copy alloca handling from as.h.
+
+ * config/tc-i386.c (i386_align_code): Correct 16 bit noops. From
+ Gabriel Paubert <paubert@iram.es>.
+
+ * config/tc-i386.c (md_assemble): In JumpByte case, when looking
+ for a WORD_PREFIX_OPCODE, change it to ADDR_PREFIX_OPCODE if this
+ is jcxz or a loop instruction.
+
+Mon Aug 25 16:04:14 1997 Nick Clifton <nickc@cygnus.com>
+
+ * config/tc-v850.c (pre_defined_registers): Add 'hp' as alias for
+ r2.
+ (md_begin): Set up machine architecture and type.
+
+Mon Aug 25 14:25:48 1997 Ian Lance Taylor <ian@cygnus.com>
+
+ * symbols.c (resolve_symbol_value): Store the value back into the
+ symbol expression, to handle add or subtract simplification
+ correctly. Handle O_symbol_rva. Add default case.
+
+ * config/tc-ppc.c (ppc_change_csect): Temporarily lower the
+ chunksize while creating the new subsection.
+ * as.c (chunksize): Initialize to zero.
+ * subsegs.c (subseg_set_rest): Change 5000 to chunksize when
+ calling obstack_begin.
+
+Mon Aug 25 11:21:48 1997 Nick Clifton <nickc@cygnus.com>
+
+ * config/tc-v850.c (md_assemble): Restore input_line_pointer upon
+ exit.
+
+start-sanitize-v850e
+ * config/tc-v850.c (parse_register_list): Support constant
+ expressions as register lists.
+end-sanitize-v850e
+
+Mon Aug 25 10:19:34 1997 Nick Clifton <nickc@cygnus.com>
+
+ * doc/c-v850.texi: Change the major node to v850 Machine
+ Dependencies.
+
+Fri Aug 22 11:16:14 1997 Nick Clifton <nickc@cygnus.com>
+
+ * doc/as.texinfo: Add inclusion of c-v850.texi
+
+ * doc/c-v850.texi: New file.
+
+ * read.c (is_end_of_line): Make NUL character be considered to be
+ a line terminator.
+
+Fri Aug 22 10:45:33 1997 Nick Clifton <nickc@cygnus.com>
+
+ * config/tc-v850.c (parse_register_list): Add support for curly
+ brace syntax.
+ (cc_names): Add "e" and "ne" conditions.
+
+Thu Aug 21 11:00:36 1997 Nick Clifton <nickc@cygnus.com>
+
+ * app.c (do_scrub_chars): Support a double dash as starting a
+ comment that extends to end of line.
+
+Thu Aug 21 10:54:27 1997 Nick Clifton <nickc@cygnus.com>
+
+ * config/tc-v850.c (v850_section, v850_bss, v850_offset): New
+ functions.
+ (md_pseudo_table): New pseudo ops: .bss, .offset, .section
+
+Thu Aug 21 00:59:53 1997 Doug Evans <dje@canuck.cygnus.com>
+
+ * config/tc-m32r.c (md_estimate_size_before_relax): Update recorded
+ insn when changing to a different instruction.
+
+start-sanitize-sh4
+Wed Aug 20 00:45:20 1997 J"orn Rennecke <amylaar@cygnus.co.uk>
+
+ * tc-sh.c (parse_reg, get_specific, build_Mytes): Add SH4
+ floating point extensions.
+ (parse_reg): parse sgr and dbr.
+
+end-sanitize-sh4
+Tue Aug 19 17:07:34 1997 Nick Clifton <nickc@cygnus.com>
+
+ * config/tc-v850.c (system_register_name): Support numbers for
+ system register IDs.
+
+Tue Aug 19 08:59:12 1997 Fred Fish <fnf@cygnus.com>
+
+ * read.c (s_lcomm_internal): Renamed from s_lcomm, added arg to
+ flag when alignment is in bytes instead of power of 2, and code to
+ use that flag to convert alignment to bytes.
+ (s_lcomm, s_lcomm_bytes): New helpers that call s_lcomm_internal.
+ * read.h (s_lcomm_bytes): Add prototype.
+ * config/obj-coff.c (write_object_file): If ALIGNMENT_IN_S_FLAGS is
+ defined, write alignment to alignment bits in section header s_flags
+ rather than the s_align field.
+start-sanitize-tic80
+ * config/obj-coff.h (ALIGNMENT_IN_S_FLAGS): Define for TC_TIC80.
+ * config/tc-tic80.c (md_pseudo_table): Use s_lcomm_bytes for bss
+ pseudo, instead of s_lcomm which wants a power of two for alignment.
+end-sanitize-tic80
+
+Mon Aug 18 20:42:23 1997 Richard Henderson <rth@cygnus.com>
+
+ * macro.c (check_macro): use alloca instead of xmalloc to plug leak.
+
+Mon Aug 18 20:33:06 1997 Richard Henderson <rth@cygnus.com>
+
+ * as.c (show_usage): Add -am.
+ * input-scrub.c (input_scrub_include_sb): Don't add leading \n
+ if we've already got one.
+ * listing.c (struct list_info_struct): Add line_contents.
+ (listing_newline): Put unused argument to work: if non-null, save it...
+ (listing_listing): ... and regurgitate during listing instead of line
+ from file.
+ * listing.h (LISTING_MACEXP): New define.
+ (LISTING_NEWLINE): Argument is NULL.
+ * read.c (read_a_source_file): If expanding macros, break up input
+ lines and pass them to listing_newline.
+ * doc/as.texinfo: Document -ac and -am.
+
+ * cond.c (s_ifc): Add missing demand_empty_rest_of_line.
+
+Mon Aug 18 11:26:36 1997 Nick Clifton <nickc@cygnus.com>
+
+ * config/tc-v850.c (md_apply_fix3): Add support for new 16 bit PC
+ relative reloc.
+
+start-sanitize-v850e
+Mon Aug 18 11:24:21 1997 Nick Clifton <nickc@cygnus.com>
+
+ * config/tc-v850.c: Remove support_v850e flag and command line
+ option.
+
+ * configure.in (emulations): Add support for v850e target
+
+ * configure (emulations): Add support for v850e target
+
+Mon Aug 18 11:24:21 1997 Nick Clifton <nickc@cygnus.com>
+
+ * config/tc-v850.c: Remove support_v850eq flag and command line
+ option.
+
+ * configure.in (emulations): Add support for v850eq target
+
+ * configure (emulations): Add support for v850eq target
+end-sanitize-v850e
+
+Fri Aug 15 14:00:13 1997 Ian Lance Taylor <ian@cygnus.com>
+
+ * Makefile.am (check-DEJAGNU): Don't cd into testsuite until after
+ setting EXPECT and TCL_LIBRARY.
+ * Makefile.in: Rebuild.
+
+ * as.h (enum debug_info_type): Define.
+ (debug_type): Declare.
+ * as.c (debug_type): New global variable.
+ (show_usage): Add --gstabs.
+ (parse_args): Handle --gstabs.
+ * read.c (generate_asm_lineno): Remove.
+ (read_a_source_file): Output stabs debugging if appropriate.
+ Change checks of generate_asm_lineno to check debug_type. Only
+ generate ECOFF debugging if ECOFF_DEBUGGING is defined.
+ * read.h (generate_asm_lineno): Don't declare.
+ (stabs_generate_asm_lineno): Declare.
+ * stabs.c (stabs_generate_asm_lineno): New function.
+ * ecoff.c (add_file): Use debug_type, not generate_asm_lineno.
+ Don't turn off debugging.
+ (add_file): Remove old #if 0 code.
+ (ecoff_new_file): Set debug_type, not generate_asm_lineno.
+ (ecoff_directive_end): Don't generate stabs line symbols.
+ (ecoff_generate_asm_lineno): Don't check stabs_seen. Don't set
+ generate_asm_lineno.
+ (line_label_cnt): Remove.
+ (ecoff_generate_asm_line_stab): Remove.
+ * ecoff.h (ecoff_generate_asm_line_stab): Don't declare.
+ * doc/as.texinfo, doc/as.1: Document --gstabs.
+
+Wed Aug 13 18:58:56 1997 Nick Clifton <nickc@cygnus.com>
+
+start-sanitize-v850e
+ * config/tc-v850.c (md_assemble, md_show_usage, md_parse_option):
+ Add support for v850eq instructions.
+
+ * config/tc-v850.c (md_assemble, md_show_usage, md_parse_option):
+ Add support for v850e instructions.
+end-sanitize-v850e
+
+ * config/tc-v850.c (md_assemble): Fix error recovery to reload
+ text of entire opcode.
+
+Tue Aug 12 10:27:34 1997 Richard Henderson <rth@cygnus.com>
+
+ * doc/internals.texi: Document rs_leb128.
+
+Tue Aug 12 12:17:03 1997 Ian Lance Taylor <ian@cygnus.com>
+
+ * config/tc-m68k.c (m68k_ip): Give an error message for SIZE_BYTE
+ in ABSL case, rather than calling abort.
+
+Mon Aug 11 21:48:00 1997 Richard Henderson <rth@cygnus.com>
+
+ * as.h (enum _relax_state): Add rs_leb128.
+ * read.c (potable): Add sleb128 and uleb128.
+ (sizeof_*leb128, output_*leb128, emit_leb128_expr, s_leb128): New
+ functions.
+ * read.h: Update prototypes.
+ * symbols.c (resolve_symbol_value): Streamline quite a bit. Return
+ the symbol value, add a second FINALIZE argument that prevents
+ changes from being comitted. Update all callers.
+ * write.c (cvt_frag_to_fill, relax_segment): Handle rs_leb128.
+ * doc/as.texinfo: Document the new pseudos.
+
+Sun Aug 10 14:51:49 1997 Ian Lance Taylor <ian@cygnus.com>
+
+ * Makefile.am (MOSTLYCLEANFILES): Add site.bak, site.exp, stage,
+ stage1, and stage2.
+ (DISTCLEANFILES): Define.
+ * doc/Makefile.am (DISTCLEANFILES): Define.
+ * Makefile.in, doc/Makefile.in: Rebuild.
+
+Wed Aug 6 00:30:30 1997 Ian Lance Taylor <ian@cygnus.com>
+
+ * configure.in: Define TARGET_BYTES_BIG_ENDIAN if endian is set.
+ Don't set targ or gas_target. Define SCO_ELF and
+ TARGET_SOLARIS_COMMENT when appropriate. Don't substitute for
+ target_frag.
+ * Makefile.am: Remove @target_frag@.
+ (INCLUDES): Remove $(INTERNAL_CFLAGS), $(CROSS), $(HDEFINES), and
+ $(TDEFINES).
+ (dep-am): Mark as phony.
+ * acconfig.h: Add TARGET_BYTES_BIG_ENDIAN, TARGET_SOLARIS_COMMENT,
+ and SCO_ELF.
+ * config/arm-big.mt, config/arm-lit.mt: Remove.
+ * config/mips-big.mt, config/mips-lit.mt: Remove.
+ * config/ppc-big.mt, config/ppc-lit.mt: Remove.
+ * config/ppc-sol.mt: Remove.
+ * config/i386coff.mt, config/m68kcoff.mt: Remove.
+ * config/m88kcoff.mt: Remove.
+ * config/sco5.mt: Remove.
+ * configure, config.in, Makefile.in: Rebuild.
+
+ * Makefile.am ($(srcdir)/config/m68k-parse.h): New target, to
+ further try to circumvent the .y.h rule.
+ * Makefile.in: Rebuild.
+
+Tue Aug 5 12:32:07 1997 Ian Lance Taylor <ian@cygnus.com>
+
+ * Makefile.am: New file, based on old Makefile.in.
+ * acinclude.m4: New file, from old aclocal.m4.
+ * configure.in: Call AM_INIT_AUTOMAKE and AM_PROG_LIBTOOL. Remove
+ shared library handling; now handled by libtool. Replace
+ AC_CONFIG_HEADER with AM_CONFIG_HEADER. Call AC_PROG_YACC,
+ AC_PROG_LEX, and AC_DECL_YYTEXT. Call AM_MAINTAINER_MODE,
+ AM_CYGWIN32, and AM_EXEEXT. Don't call CY_CYGWIN32 or CY_EXEEXT.
+ * config.in: New file, created by autoheader.
+ * conf.in: Remove.
+ * acconfig.h: Mention PACKAGE, VERSION, and USING_CGEN.
+ * stamp-h.in: New file.
+ * as.c (print_version_id): Change GAS_VERSION to VERSION.
+ (parse_args): Likewise.
+ * config/obj-vms.c: (Write_VMS_MHD_Records): Likewise.
+ * doc/Makefile.am: New file, based on old doc/Makefile.in.
+ * Makefile.in, doc/Makefile.in: Now built with automake.
+ * aclocal.m4: Now built with aclocal.
+ * configure: Rebuild.
+
+ * cond.c (s_else): If not listing false conditionals, turn listing
+ off in the false branch of the else.
+
+Mon Aug 4 11:28:35 1997 Ian Lance Taylor <ian@cygnus.com>
+
+ * config/tc-mips.c (macro): Fix handling of a double load from a
+ symbol plus an offset.
+
+ * ecoff.c (ecoff_build_symbols): Set fMerge to 0 for an FDR which
+ has an associated external symbol.
+
+Sun Aug 3 23:23:59 1997 Richard Henderson <rth@cygnus.com>
+
+ * config/tc-alpha.c (s_alpha_ucons): New function.
+ (md_pseudo_table): Add unaligned data pseudos for DWARF.
+
+Thu Jul 31 15:13:43 1997 Jeffrey A Law (law@cygnus.com)
+
+ * config/tc-v850.c (md_assemble): Ignore the rest of the current
+ line if we encounter an error.
+
+ * config/tc-v850.c (md_assemble): Sign extend constants value
+ for hi and hi0 expressions.
+ (v850_insert_operand): Enable range checking for generic 16bit
+ operands.
+
+Tue Jul 29 14:20:43 1997 Jeffrey A Law (law@cygnus.com)
+
+ * config/tc-v850.c (md_assemble): Turn on fx_no_overflow for
+ LO16, HI16 and HI16_S relocs.
+
+Mon Jul 28 18:41:41 1997 Rob Savoye <rob@chinadoll.cygnus.com>
+
+ * configure.in: Use CYGWIN and EXEEXT autoconf macro to look for
+ win32 dependencies.
+ * configure: Regenerated with autoconf 2.12.
+ * Makefile.in: Add $(EXEEXT) to all executables.
+
+Fri Jul 25 10:54:43 1997 Jeffrey A Law (law@cygnus.com)
+
+ * tc-hppa.c (md_apply_fix): Improve warnings for out of range
+ unconditional branches.
+ (hppa_fix_adjustable): Don't adjust anything with a RR% or LR%
+ field selector.
+
+Thu Jul 24 15:21:49 1997 Doug Evans <dje@canuck.cygnus.com>
+
+ * tc-sparc.c (md_begin): Cast sparc_opcodes to PTR for hash_insert.
+
+Thu Jul 24 17:51:29 1997 Ian Lance Taylor <ian@cygnus.com>
+
+ * macro.c (define_macro): Make sure the index is in range before
+ checking for '('.
+
+start-sanitize-tic80
+Thu Jul 24 12:13:19 1997 Fred Fish <fnf@cygnus.com>
+
+ * config/tc-tic80.c (build_insn): Remove "extended" and replace with
+ "fx" and "fxfrag". Add "ffrag". Change code to initialize and use
+ the right f/ffrag and fx/fxfrag pairs since instruction may be split
+ across frags.
+
+end-sanitize-tic80
+Tue Jul 22 18:38:56 1997 Robert Hoehne <robert.hoehne@Mathematik.TU-Chemnitz.DE>
+
+ * config/te-go32.h (USE_ALIGN_PTWO): Define.
+ * config/tc-i386.c (md_pseudo_table): If USE_ALIGN_PTWO is
+ defined, use s_align_ptwo for .align.
+ * configure.in (i386-*-msdosdjgpp*): New target.
+ (i386-*-go32*): Set em to go32 and targ to coffgo32.
+ * configure: Rebuild.
+
+Tue Jul 22 12:41:40 1997 Doug Evans <dje@canuck.cygnus.com>
+
+ * config/tc-sparc.c (last_opcode): New static local.
+ (md_assemble): Don't issue "FP branch in delay slot" warning if
+ the delay slot has been annulled.
+
Tue Jul 22 13:25:13 1997 Ian Lance Taylor <ian@cygnus.com>
* config/tc-m68k.c (md_apply_fix_2): Check for PC relative reloc
code if BFD_ASSEMBLER.
-start-sanitize-v850
Mon Jul 21 08:57:17 1997 Jeffrey A Law (law@cygnus.com)
* config/tc-v850.c (system_registers): Fix ordering of registers.
-end-sanitize-v850
start-sanitize-tic80
Tue Jul 15 16:29:54 1997 Fred Fish <fnf@cygnus.com>
Thu Feb 13 20:02:16 1997 Fred Fish <fnf@cygnus.com>
- * config/{tc-alpha.h, tc-arc.h, tc-d10v.h, tc-generic.h, tc-i960.h,
+ * config/{tc-alpha.h, tc-d10v.h, tc-generic.h, tc-i960.h,
tc-mn10200.h, tc-mn10300.h, tc-sh.h, tc-vax.h, tc-w65.h}:
Add default definition of zero for TARGET_BYTES_BIG_ENDIAN.
* config/{tc-arm.h, tc-hppa.h, tc-i386.h, tc-mips.h, tc-ns32k.h,
(mips_elf_final_processing): Likewise.
(ELF_TC_SPECIAL_SECTIONS): Likewise.
-start-sanitize-v850
Tue Dec 31 15:12:35 1996 Michael Meissner <meissner@tiktok.cygnus.com>
* config/tc-v850.c (md_assemble): If this is sst.{h,w} or
sld.{h,w} and the operand is relocatable, adjust the adend by
shifting it right one bit.
-end-sanitize-v850
Tue Dec 31 12:56:41 1996 Ian Lance Taylor <ian@cygnus.com>
* read.c (read_a_source_file): Check mri_pending_align after
* doc/internals.texi: Rewrite, and add a lot of documentation.
* doc/Makefile.in (internals.info): New target.
-start-sanitize-v850
Wed Oct 30 14:55:57 1996 Jeffrey A Law (law@cygnus.com)
* config/tc-v850.h (tc_fix_adjustable): Don't adjust relocs
operand. If it does, allocate frag with frag_var and don't
do any fixups.
-end-sanitize-v850
Mon Oct 28 10:48:40 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
* config/tc-d10v.h (md_cleanup): New function. This is needed to
* write.c (fix_new_exp): Use make_expr_symbol to build an
expression symbol for a complex fixup.
-start-sanitize-v850
Thu Oct 24 14:31:04 1996 Jeffrey A Law (law@cygnus.com)
* config/tc-v850.c (v850_reloc_prefix): Several disgusting
* config/tc-v850.h (tc_fix_adjustable): Don't adjust TDA relocs.
-end-sanitize-v850
Wed Oct 23 18:20:29 1996 Ian Lance Taylor <ian@cygnus.com>
* config/tc-ppc.c (md_apply_fix3): Give a better warning message
for an unknown relocation type.
-start-sanitize-v850
Wed Oct 23 16:21:28 1996 Jeffrey A Law (law@cygnus.com)
* config/tc-v850.c (md_pseudo_table): Add .word; allocates
* config/tc-v850.c (md_assemble): Handle TDAOFF relocs
differently for movea & sst/sld insns.
-end-sanitize-v850
Tue Oct 22 17:09:32 1996 Michael Meissner <meissner@tiktok.cygnus.com>
* config/tc-d10v.c (parallel_ok): Don't allow illegal combinations
* Makefile.in ($(OBJS)): Depend upon libiberty.h.
-start-sanitize-v850
Wed Oct 16 11:28:31 1996 Jeffrey A Law (law@cygnus.com)
* config/tc-v850.c (v850_reloc_prefix): Recognize zdaoff, tdaoff
(md_pcrel_from_section): New function.
* config/tc-v850.h (MD_PCREL_FROM_SECTION): Define.
-end-sanitize-v850
Mon Oct 14 13:59:12 1996 Ian Lance Taylor <ian@cygnus.com>
* config/tc-mips.c (load_register): Add cast to offsetT when using
(alpha_macros): Move to top of file. Make static.
(alpha_num_macros): Move to top of file.
-start-sanitize-v850
Tue Oct 1 09:36:19 1996 Stu Grossman (grossman@critters.cygnus.com)
* tc-v850.h: Define LOCAL_LABEL to recognise _.L_* symbols
generated by DWARF.
-end-sanitize-v850
Sat Sep 28 03:38:08 1996 Ian Lance Taylor <ian@cygnus.com>
* listing.c (list_symbol_table): Remove bogus code in BFD64 case,
* config/tc-d10v.c: Added changes to support function
pointers and "@word" syntax.
-start-sanitize-v850
Tue Sep 3 11:57:18 1996 Jeffrey A Law (law@cygnus.com)
* config/tc-v850.c: Remove commented out and #if 0'd code.
(md_apply_fix3): handle fixups/relocs.
* config/tc-v850.h (MD_PCREL_FROM_SECTION): Removed definition.
-end-sanitize-v850
Fri Aug 30 18:12:00 1996 Ian Lance Taylor <ian@cygnus.com>
Add SH ELF support.
* config/tc-d10v.c (find_opcode): Fix problem with calculating
branch sizes in across sections.
-start-sanitize-v850
Fri Aug 30 00:44:13 1996 Jeffrey A Law (law@cygnus.com)
* config/tc-850.c (md_assemble): Handle hi() correctly. Handle
* config/tc-v850.c (md_begin): Deal with end of opcode
table marker.
-end-sanitize-v850
Wed Aug 28 19:20:04 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
* config/tc-d10v.c (find_opcode): Fix a bug which could generate
* doc/c-d10v.texi: Fix typo.
-start-sanitize-v850
Fri Aug 23 10:41:32 1996 Jeffrey A Law (law@cygnus.com)
* config/tc-v850.c (md_assemble): Correct bit masking for
opcode doesn't want a register, then we don't have a match.
(md_assemble): Get size of the instruction from the opcode table.
-end-sanitize-v850
Thu Aug 22 10:20:30 1996 Ian Lance Taylor <ian@cygnus.com>
* configure.in: Set and substitute HLDENV.
* config/tc-d10v.c: Fix a reloc bug caused by my last change.
* doc/c-d10v.texi: Cleanup.
-start-sanitize-v850
Tue Aug 20 15:15:16 1996 J.T. Conklin <jtc@hippo.cygnus.com>
* config/tc-v850.c: New file.
* configure (v850-*-elf): New target.
* configure.in (v850-*-elf): New target.
-end-sanitize-v850
Wed Aug 21 15:50:54 1996 Martin M. Hunt <hunt@pizza.cygnus.com>
* doc/c-d10v.texi: New file.
* mpw-config.in: Don't always use te-generic.h for emulation.
(powerpc-apple-macos): Use emulation te-macos.h.
-start-sanitize-gm
- (mips-gm-magic): New configuration.
-end-sanitize-gm
* mpw-make.sed (install, install-only): Edit in Mac-specific
install procedure.