/* tc-arc.h - Macros and type defines for the ARC.
- Copyright 1994, 1995, 1997, 2000, 2001 Free Software Foundation, Inc.
- Contributed by Doug Evans (dje@cygnus.com).
+ Copyright (C) 2014-2020 Free Software Foundation, Inc.
+
+ Contributed by Claudiu Zissulescu (claziss@synopsys.com)
This file is part of GAS, the GNU Assembler.
GAS is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as
- published by the Free Software Foundation; either version 2,
+ published by the Free Software Foundation; either version 3,
or (at your option) any later version.
GAS is distributed in the hope that it will be useful, but
You should have received a copy of the GNU General Public License
along with GAS; see the file COPYING. If not, write to the Free
- Software Foundation, 59 Temple Place - Suite 330, Boston, MA
- 02111-1307, USA. */
+ Software Foundation, 51 Franklin Street - Fifth Floor, Boston, MA
+ 02110-1301, USA. */
-#define TC_ARC 1
+#include "opcode/arc.h"
-#define TARGET_BYTES_BIG_ENDIAN 0
+/* By convention, you should define this macro in the `.h' file. For
+ example, `tc-m68k.h' defines `TC_M68K'. You might have to use this
+ if it is necessary to add CPU specific code to the object format
+ file. */
+#define TC_ARC
+/* We want local label support. */
#define LOCAL_LABELS_FB 1
+/* This macro is the BFD architecture to pass to
+ `bfd_set_arch_mach'. */
#define TARGET_ARCH bfd_arch_arc
+/* The `extsym - .' expressions can be emitted using PC-relative
+ relocs. */
#define DIFF_EXPR_OK
-#define REGISTER_PREFIX '%'
-
-#ifdef LITTLE_ENDIAN
-#undef LITTLE_ENDIAN
-#endif
-#ifdef BIG_ENDIAN
-#undef BIG_ENDIAN
-#endif
+#define REGISTER_PREFIX '%'
+#undef LITTLE_ENDIAN
#define LITTLE_ENDIAN 1234
+#undef BIG_ENDIAN
#define BIG_ENDIAN 4321
+#ifdef TARGET_BYTES_BIG_ENDIAN
+
+# define DEFAULT_TARGET_FORMAT "elf32-bigarc"
+# define DEFAULT_BYTE_ORDER BIG_ENDIAN
+
+#else
+/* You should define this macro to be non-zero if the target is big
+ endian, and zero if the target is little endian. */
+# define TARGET_BYTES_BIG_ENDIAN 0
+
+# define DEFAULT_TARGET_FORMAT "elf32-littlearc"
+# define DEFAULT_BYTE_ORDER LITTLE_ENDIAN
+
+#endif /* TARGET_BYTES_BIG_ENDIAN. */
+
/* The endianness of the target format may change based on command
line arguments. */
extern const char *arc_target_format;
-#define DEFAULT_TARGET_FORMAT "elf32-littlearc"
+
+/* This macro is the BFD target name to use when creating the output
+ file. This will normally depend upon the `OBJ_FMT' macro. */
#define TARGET_FORMAT arc_target_format
-#define DEFAULT_BYTE_ORDER LITTLE_ENDIAN
+/* `md_short_jump_size'
+ `md_long_jump_size'
+ `md_create_short_jump'
+ `md_create_long_jump'
+
+ If `WORKING_DOT_WORD' is defined, GAS will not do broken word
+ processing (*note Broken words::.). Otherwise, you should set
+ `md_short_jump_size' to the size of a short jump (a jump that is
+ just long enough to jump around a long jmp) and `md_long_jump_size'
+ to the size of a long jump (a jump that can go anywhere in the
+ function). You should define `md_create_short_jump' to create a
+ short jump around a long jump, and define `md_create_long_jump' to
+ create a long jump. */
#define WORKING_DOT_WORD
#define LISTING_HEADER "ARC GAS "
-#define TC_HANDLES_FX_DONE
+/* The number of bytes to put into a word in a listing. This affects
+ the way the bytes are clumped together in the listing. For
+ example, a value of 2 might print `1234 5678' where a value of 1
+ would print `12 34 56 78'. The default value is 4. */
+#define LISTING_WORD_SIZE 2
+
+/* If you define this macro, it should return the position from which
+ the PC relative adjustment for a PC relative fixup should be made.
+ On many processors, the base of a PC relative instruction is the
+ next instruction, so this macro would return the length of an
+ instruction, plus the address of the PC relative fixup. The latter
+ can be calculated as fixp->fx_where +
+ fixp->fx_frag->fr_address. */
+extern long md_pcrel_from_section (struct fix *, segT);
+#define MD_PCREL_FROM_SECTION(FIX, SEC) md_pcrel_from_section (FIX, SEC)
+
+/* [ ] is index operator. */
+#define NEED_INDEX_OPERATOR
+
+#define MAX_MEM_FOR_RS_ALIGN_CODE (1+2)
+
+/* HANDLE_ALIGN called after all the assembly has been done,
+ so we can fill in all the rs_align_code type frags with
+ nop instructions. */
+#define HANDLE_ALIGN(FRAGP) arc_handle_align (FRAGP)
+
+/* Values passed to md_apply_fix3 don't include the symbol value. */
+#define MD_APPLY_SYM_VALUE(FIX) 0
+
+/* No shared lib support, so we don't need to ensure externally
+ visible symbols can be overridden. */
+#define EXTERN_FORCE_RELOC 0
+
+/* You may define this macro to generate a fixup for a data allocation
+ pseudo-op. */
+#define TC_CONS_FIX_NEW(FRAG, OFF, LEN, EXP, RELOC) \
+ arc_cons_fix_new ((FRAG), (OFF), (LEN), (EXP), (RELOC))
+
+/* We don't want gas to fixup the following program memory related
+ relocations. Check also that fx_addsy is not NULL, in order to
+ make sure that the fixup refers to some sort of label. */
+#define TC_VALIDATE_FIX(FIXP,SEG,SKIP) \
+ if ((FIXP->fx_r_type == BFD_RELOC_ARC_GOTPC32 \
+ || FIXP->fx_r_type == BFD_RELOC_ARC_PLT32 \
+ || FIXP->fx_r_type == BFD_RELOC_ARC_S25W_PCREL_PLT \
+ || FIXP->fx_r_type == BFD_RELOC_ARC_S25H_PCREL_PLT \
+ || FIXP->fx_r_type == BFD_RELOC_ARC_S21W_PCREL_PLT \
+ || FIXP->fx_r_type == BFD_RELOC_ARC_S21H_PCREL_PLT) \
+ && FIXP->fx_addsy != NULL \
+ && FIXP->fx_subsy == NULL) \
+ { \
+ symbol_mark_used_in_reloc (FIXP->fx_addsy); \
+ goto SKIP; \
+ }
+
+/* BFD_RELOC_ARC_TLS_GD_LD may use fx_subsy to store a label that is
+ later turned into fx_offset. */
+#define TC_FORCE_RELOCATION_SUB_LOCAL(FIX, SEG) \
+ ((FIX)->fx_r_type == BFD_RELOC_ARC_TLS_GD_LD)
+
+#define TC_VALIDATE_FIX_SUB(FIX, SEG) \
+ ((md_register_arithmetic || (SEG) != reg_section) \
+ && ((FIX)->fx_r_type == BFD_RELOC_GPREL32 \
+ || (FIX)->fx_r_type == BFD_RELOC_GPREL16 \
+ || (FIX)->fx_r_type == BFD_RELOC_ARC_TLS_DTPOFF \
+ || (FIX)->fx_r_type == BFD_RELOC_ARC_TLS_DTPOFF_S9 \
+ || TC_FORCE_RELOCATION_SUB_LOCAL (FIX, SEG)))
+
+/* We use this to mark the end-loop label. We use this mark for ZOL
+ validity checks. */
+#define TC_SYMFIELD_TYPE unsigned int
+#define ARC_GET_FLAG(s) (*symbol_get_tc (s))
+#define ARC_SET_FLAG(s,v) (*symbol_get_tc (s) |= (v))
+
+/* The symbol is a ZOL's end loop label. */
+#define ARC_FLAG_ZOL (1 << 0)
+/* The symbol is an AUX register. */
+#define ARC_FLAG_AUX (1 << 1)
+
+/* We use this hook to check the validity of the last to instructions
+ of a ZOL. */
+#define tc_frob_label(S) arc_frob_label (S)
+
+#define GLOBAL_OFFSET_TABLE_NAME "_GLOBAL_OFFSET_TABLE_"
+
+/* We need to take care of not having section relative fixups for the
+ fixups with respect to Position Independent Code. */
+#define tc_fix_adjustable(FIX) tc_arc_fix_adjustable(FIX)
+
+/* This hook is required to parse register names as operands. */
+#define md_parse_name(name, exp, m, c) arc_parse_name (name, exp)
+
+/* Used within frags to pass some information to some relaxation
+ machine dependent values. */
+#define TC_FRAG_TYPE struct arc_relax_type
+
+/* Adjust non PC-rel values at relaxation time. */
+#define TC_PCREL_ADJUST(F) arc_pcrel_adjust (F)
+
+/* Adjust symbol table. */
+#define obj_adjust_symtab() arc_adjust_symtab ()
+
+/* Object attribute hooks. */
+#define md_end arc_md_end
+#define CONVERT_SYMBOLIC_ATTRIBUTE(name) arc_convert_symbolic_attribute (name)
+#ifndef TC_COPY_SYMBOL_ATTRIBUTES
+#define TC_COPY_SYMBOL_ATTRIBUTES(DEST, SRC) \
+ (arc_copy_symbol_attributes (DEST, SRC))
+#endif
+
+extern void arc_copy_symbol_attributes (symbolS *, symbolS *);
+extern int arc_convert_symbolic_attribute (const char *);
+extern void arc_md_end (void);
+extern void arc_adjust_symtab (void);
+extern int arc_pcrel_adjust (fragS *);
+extern bfd_boolean arc_parse_name (const char *, struct expressionS *);
+extern int tc_arc_fix_adjustable (struct fix *);
+extern void arc_handle_align (fragS *);
+extern void arc_cons_fix_new (fragS *, int, int, expressionS *,
+ bfd_reloc_code_real_type);
+extern void arc_frob_label (symbolS *);
+extern void tc_arc_frame_initial_instructions (void);
+extern int tc_arc_regname_to_dw2regnum (char *regname);
+
+/* The blink register is r31. */
+#define DWARF2_DEFAULT_RETURN_COLUMN 31
+/* Registers are generally saved at negative offsets to the CFA. */
+#define DWARF2_CIE_DATA_ALIGNMENT (-4)
+
+/* We want .cfi_* pseudo-ops for generating unwind info. */
+#define TARGET_USE_CFIPOP 1
+
+/* CFI hooks. */
+#define tc_cfi_frame_initial_instructions tc_arc_frame_initial_instructions
+#define tc_regname_to_dw2regnum tc_arc_regname_to_dw2regnum
+
+/* Define the NOPs. */
+#define NOP_OPCODE_S 0x000078E0
+#define NOP_OPCODE_L 0x264A7000 /* mov 0,0. */
+
+#define MAX_FLAG_NAME_LENGTH 7
+
+struct arc_flags
+{
+ /* Name of the parsed flag. */
+ char name[MAX_FLAG_NAME_LENGTH + 1];
+
+ /* Pointer to arc flags. */
+ const struct arc_flag_operand *flgp;
+};
+
+extern const relax_typeS md_relax_table[];
+#define TC_GENERIC_RELAX_TABLE md_relax_table
-#define MD_APPLY_FIX3
+/* Used to construct instructions at md_convert_frag stage of
+ relaxation. */
+struct arc_relax_type
+{
+ /* Dictates whether the pc-relativity should be kept in mind when
+ relax_frag is called or whether the pc-relativity should be
+ solved outside of relaxation. For clarification: BL(_S) and
+ B(_S) use pcrel == 1 and ADD with a solvable expression as 3rd
+ operand use pcrel == 0. */
+ unsigned char pcrel;
-/* The ARC needs to parse reloc specifiers in .word. */
+ /* Expressions that dictate the operands. Used for re-assembling in
+ md_convert_frag. */
+ expressionS tok[MAX_INSN_ARGS];
-extern void arc_parse_cons_expression PARAMS ((struct expressionS *, unsigned));
-#define TC_PARSE_CONS_EXPRESSION(EXP, NBYTES) \
-arc_parse_cons_expression (EXP, NBYTES)
+ /* Number of tok (i.e. number of operands). Used for re-assembling
+ in md_convert_frag. */
+ int ntok;
-extern void arc_cons_fix_new PARAMS ((struct frag *, int, int, struct expressionS *));
-#define TC_CONS_FIX_NEW(FRAG, WHERE, NBYTES, EXP) \
-arc_cons_fix_new (FRAG, WHERE, NBYTES, EXP)
+ /* Flags of instruction. Used for re-assembling in
+ md_convert_frag. */
+ struct arc_flags pflags[MAX_INSN_FLGS];
-#define DWARF2_LINE_MIN_INSN_LENGTH 4
+ /* Number of flags. Used for re-assembling in md_convert_frag. */
+ int nflg;
+};