/* x86-64 extension prefix. */
typedef int rex_byte;
-/* The SSE5 instructions have a two bit instruction modifier (OC) that
- is stored in two separate bytes in the instruction. Pick apart OC
- into the 2 separate bits for instruction. */
-#define DREX_OC0(x) (((x) & 1) != 0)
-#define DREX_OC1(x) (((x) & 2) != 0)
-
-#define DREX_OC0_MASK (1 << 3) /* set OC0 in byte 4 */
-#define DREX_OC1_MASK (1 << 2) /* set OC1 in byte 3 */
-
-/* OC mappings */
-#define DREX_XMEM_X1_X2_X2 0 /* 4 op insn, dest = src3, src1 = reg/mem */
-#define DREX_X1_XMEM_X2_X2 1 /* 4 op insn, dest = src3, src2 = reg/mem */
-#define DREX_X1_XMEM_X2_X1 2 /* 4 op insn, dest = src1, src2 = reg/mem */
-#define DREX_X1_X2_XMEM_X1 3 /* 4 op insn, dest = src1, src3 = reg/mem */
-
-#define DREX_XMEM_X1_X2 0 /* 3 op insn, src1 = reg/mem */
-#define DREX_X1_XMEM_X2 1 /* 3 op insn, src1 = reg/mem */
-
-/* Information needed to create the DREX byte in SSE5 instructions. */
-typedef struct
-{
- unsigned int reg; /* register */
- unsigned int rex; /* REX flags */
- unsigned int modrm_reg; /* which arg goes in the modrm.reg field */
- unsigned int modrm_regmem; /* which arg goes in the modrm.regmem field */
-} drex_byte;
-
/* 386 opcode byte to code indirect addressing. */
typedef struct
{
#endif
static void signed_cons (int);
static char *output_invalid (int c);
+static int i386_finalize_immediate (segT, expressionS *, i386_operand_type,
+ const char *);
+static int i386_finalize_displacement (segT, expressionS *, i386_operand_type,
+ const char *);
static int i386_att_operand (char *);
static int i386_intel_operand (char *, int);
+static int i386_intel_simplify (expressionS *);
+static int i386_intel_parse_name (const char *, expressionS *);
static const reg_entry *parse_register (char *, char **);
static char *parse_insn (char *, char *);
static char *parse_operands (char *, const char *);
static int check_qword_reg (void);
static int check_word_reg (void);
static int finalize_imm (void);
-static void process_drex (void);
static int process_operands (void);
static const seg_entry *build_modrm_byte (void);
static void output_insn (void);
unsigned char prefix[MAX_PREFIXES];
/* RM and SIB are the modrm byte and the sib byte where the
- addressing modes of this insn are encoded. DREX is the byte
- added by the SSE5 instructions. */
-
+ addressing modes of this insn are encoded. */
modrm_byte rm;
rex_byte rex;
sib_byte sib;
- drex_byte drex;
vex_prefix vex;
/* Swap operand in encoding. */
static expressionS im_expressions[MAX_IMMEDIATE_OPERANDS];
/* Current operand we are working on. */
-static int this_operand;
+static int this_operand = -1;
/* We support four different modes. FLAG_CODE variable is used to distinguish
these. */
CPU_CORE2_FLAGS },
{ "corei7", PROCESSOR_COREI7,
CPU_COREI7_FLAGS },
+ { "l1om", PROCESSOR_GENERIC64,
+ CPU_L1OM_FLAGS },
{ "k6", PROCESSOR_K6,
CPU_K6_FLAGS },
{ "k6_2", PROCESSOR_K6,
CPU_K8_FLAGS },
{ "amdfam10", PROCESSOR_AMDFAM10,
CPU_AMDFAM10_FLAGS },
+ { ".8087", PROCESSOR_UNKNOWN,
+ CPU_8087_FLAGS },
+ { ".287", PROCESSOR_UNKNOWN,
+ CPU_287_FLAGS },
+ { ".387", PROCESSOR_UNKNOWN,
+ CPU_387_FLAGS },
+ { ".no87", PROCESSOR_UNKNOWN,
+ CPU_ANY87_FLAGS },
{ ".mmx", PROCESSOR_UNKNOWN,
CPU_MMX_FLAGS },
+ { ".nommx", PROCESSOR_UNKNOWN,
+ CPU_3DNOWA_FLAGS },
{ ".sse", PROCESSOR_UNKNOWN,
CPU_SSE_FLAGS },
{ ".sse2", PROCESSOR_UNKNOWN,
CPU_SSE4_2_FLAGS },
{ ".sse4", PROCESSOR_UNKNOWN,
CPU_SSE4_2_FLAGS },
+ { ".nosse", PROCESSOR_UNKNOWN,
+ CPU_ANY_SSE_FLAGS },
{ ".avx", PROCESSOR_UNKNOWN,
CPU_AVX_FLAGS },
+ { ".noavx", PROCESSOR_UNKNOWN,
+ CPU_ANY_AVX_FLAGS },
{ ".vmx", PROCESSOR_UNKNOWN,
CPU_VMX_FLAGS },
{ ".smx", PROCESSOR_UNKNOWN,
CPU_PCLMUL_FLAGS },
{ ".fma", PROCESSOR_UNKNOWN,
CPU_FMA_FLAGS },
+ { ".fma4", PROCESSOR_UNKNOWN,
+ CPU_FMA4_FLAGS },
{ ".movbe", PROCESSOR_UNKNOWN,
CPU_MOVBE_FLAGS },
{ ".ept", PROCESSOR_UNKNOWN,
CPU_SSE4A_FLAGS },
{ ".abm", PROCESSOR_UNKNOWN,
CPU_ABM_FLAGS },
- { ".sse5", PROCESSOR_UNKNOWN,
- CPU_SSE5_FLAGS },
};
#ifdef I386COFF
SKIP_WHITESPACE ();
- if (needs_align
+ if (needs_align
&& *input_line_pointer == ',')
{
align = parse_align (needs_align - 1);
-
+
if (align == (addressT) -1)
return NULL;
}
{
/* If the padding is less than 15 bytes, we use the normal
ones. Otherwise, we use a jump instruction and adjust
- its offset. */
- if (count < 15)
+ its offset. */
+ int limit;
+
+ /* For 64bit, the limit is 3 bytes. */
+ if (flag_code == CODE_64BIT
+ && fragP->tc_frag_data.isa_flags.bitfield.cpulm)
+ limit = 3;
+ else
+ limit = 15;
+ if (count < limit)
memcpy (fragP->fr_literal + fragP->fr_fix,
patt[count - 1], count);
else
return x;
}
+static INLINE i386_cpu_flags
+cpu_flags_and_not (i386_cpu_flags x, i386_cpu_flags y)
+{
+ switch (ARRAY_SIZE (x.array))
+ {
+ case 3:
+ x.array [2] &= ~y.array [2];
+ case 2:
+ x.array [1] &= ~y.array [1];
+ case 1:
+ x.array [0] &= ~y.array [0];
+ break;
+ default:
+ abort ();
+ }
+ return x;
+}
+
#define CPU_FLAGS_ARCH_MATCH 0x1
#define CPU_FLAGS_64BIT_MATCH 0x2
#define CPU_FLAGS_AES_MATCH 0x4
return match;
/* Check reverse. */
- assert (i.operands == 2);
+ gas_assert (i.operands == 2);
match = 1;
for (j = 0; j < 2; j++)
smallest_imm_type (offsetT num)
{
i386_operand_type t;
-
+
operand_type_set (&t, 0);
t.bitfield.imm64 = 1;
else
allow_naked_reg = (ask_naked_reg < 0);
+ expr_set_rank (O_full_ptr, syntax_flag ? 10 : 0);
+
identifier_chars['%'] = intel_syntax && allow_naked_reg ? '%' : 0;
identifier_chars['$'] = intel_syntax ? '$' : 0;
register_prefix = allow_naked_reg ? "" : "%";
demand_empty_rest_of_line ();
}
+static void
+check_cpu_arch_compatible (const char *name ATTRIBUTE_UNUSED,
+ i386_cpu_flags new ATTRIBUTE_UNUSED)
+{
+#if defined (OBJ_ELF) || defined (OBJ_MAYBE_ELF)
+ static const char *arch;
+
+ /* Intel LIOM is only supported on ELF. */
+ if (!IS_ELF)
+ return;
+
+ if (!arch)
+ {
+ /* Use cpu_arch_name if it is set in md_parse_option. Otherwise
+ use default_arch. */
+ arch = cpu_arch_name;
+ if (!arch)
+ arch = default_arch;
+ }
+
+ /* If we are targeting Intel L1OM, wm must enable it. */
+ if (get_elf_backend_data (stdoutput)->elf_machine_code != EM_L1OM
+ || new.bitfield.cpul1om)
+ return;
+
+ as_bad (_("`%s' is not supported on `%s'"), name, arch);
+#endif
+}
+
static void
set_cpu_arch (int dummy ATTRIBUTE_UNUSED)
{
{
if (strcmp (string, cpu_arch[i].name) == 0)
{
+ check_cpu_arch_compatible (string, cpu_arch[i].flags);
+
if (*string != '.')
{
cpu_arch_name = cpu_arch[i].name;
break;
}
- flags = cpu_flags_or (cpu_arch_flags,
- cpu_arch[i].flags);
+ if (strncmp (string + 1, "no", 2))
+ flags = cpu_flags_or (cpu_arch_flags,
+ cpu_arch[i].flags);
+ else
+ flags = cpu_flags_and_not (cpu_arch_flags,
+ cpu_arch[i].flags);
if (!cpu_flags_equal (&flags, &cpu_arch_flags))
{
if (cpu_sub_arch_name)
demand_empty_rest_of_line ();
}
+enum bfd_architecture
+i386_arch (void)
+{
+ if (cpu_arch_isa_flags.bitfield.cpul1om)
+ {
+ if (OUTPUT_FLAVOR != bfd_target_elf_flavour
+ || flag_code != CODE_64BIT)
+ as_fatal (_("Intel L1OM is 64bit ELF only"));
+ return bfd_arch_l1om;
+ }
+ else
+ return bfd_arch_i386;
+}
+
unsigned long
i386_mach ()
{
if (!strcmp (default_arch, "x86_64"))
- return bfd_mach_x86_64;
+ {
+ if (cpu_arch_isa_flags.bitfield.cpul1om)
+ {
+ if (OUTPUT_FLAVOR != bfd_target_elf_flavour)
+ as_fatal (_("Intel L1OM is 64bit ELF only"));
+ return bfd_mach_l1om;
+ }
+ else
+ return bfd_mach_x86_64;
+ }
else if (!strcmp (default_arch, "i386"))
return bfd_mach_i386_i386;
else
(x->rex & REX_R) != 0,
(x->rex & REX_X) != 0,
(x->rex & REX_B) != 0);
- fprintf (stdout, " drex: reg %d rex 0x%x\n",
- x->drex.reg, x->drex.rex);
for (i = 0; i < x->operands; i++)
{
fprintf (stdout, " #%d: ", i + 1);
sign > 0 ? "signed" : "unsigned", size);
}
- abort ();
- return BFD_RELOC_NONE;
+ return NO_RELOC;
}
/* Here we decide which fixups can be adjusted to make them relative to
|| fixP->fx_r_type == BFD_RELOC_VTABLE_INHERIT
|| fixP->fx_r_type == BFD_RELOC_VTABLE_ENTRY)
return 0;
+
+ if (fixP->fx_addsy != NULL
+ && symbol_get_bfdsym (fixP->fx_addsy)->flags & BSF_GNU_INDIRECT_FUNCTION)
+ return 0;
#endif
return 1;
}
i.op[xchg] = i.op[0];
i.op[0] = temp_op;
- assert (i.rm.mode == 3);
+ gas_assert (i.rm.mode == 3);
i.rex = REX_R;
xchg = i.rm.regmem;
would be. Here we fake an 8-bit immediate operand from the
opcode suffix stored in tm.extension_opcode.
- SSE5 and AVX instructions also use this encoding, for some of
+ AVX instructions also use this encoding, for some of
3 argument instructions. */
- assert (i.imm_operands == 0
- && (i.operands <= 2
- || (i.tm.cpu_flags.bitfield.cpusse5
- && i.operands <= 3)
- || (i.tm.opcode_modifier.vex
- && i.operands <= 4)));
+ gas_assert (i.imm_operands == 0
+ && (i.operands <= 2
+ || (i.tm.opcode_modifier.vex
+ && i.operands <= 4)));
exp = &im_expressions[i.imm_operands++];
i.op[i.operands].imms = exp;
return;
line = parse_operands (line, mnemonic);
+ this_operand = -1;
if (line == NULL)
return;
there is no suffix, the default will be byte extension. */
if (i.reg_operands != 2
&& !i.suffix
- && intel_syntax)
+ && intel_syntax)
as_bad (_("ambiguous operand size for `%s'"), i.tm.name);
i.suffix = 0;
if (!process_suffix ())
return;
+ /* Update operand types. */
+ for (j = 0; j < i.operands; j++)
+ i.types[j] = operand_type_and (i.types[j], i.tm.operand_types[j]);
+
/* Make still unresolved immediate matches conform to size of immediate
given in i.suffix. */
if (!finalize_imm ())
if (i.types[0].bitfield.imm1)
i.imm_operands = 0; /* kludge for shift insns. */
- for (j = 0; j < 3; j++)
- if (i.types[j].bitfield.inoutportreg
- || i.types[j].bitfield.shiftcount
- || i.types[j].bitfield.acc
- || i.types[j].bitfield.floatacc)
- i.reg_operands--;
+ /* We only need to check those implicit registers for instructions
+ with 3 operands or less. */
+ if (i.operands <= 3)
+ for (j = 0; j < i.operands; j++)
+ if (i.types[j].bitfield.inoutportreg
+ || i.types[j].bitfield.shiftcount
+ || i.types[j].bitfield.acc
+ || i.types[j].bitfield.floatacc)
+ i.reg_operands--;
/* ImmExt should be processed after SSE2AVX. */
if (!i.tm.opcode_modifier.sse2avx
}
}
- /* If the instruction has the DREX attribute (aka SSE5), don't emit a
- REX prefix. */
- if (i.tm.opcode_modifier.drex || i.tm.opcode_modifier.drexc)
- {
- i.drex.rex = i.rex;
- i.rex = 0;
- }
- else if (i.rex != 0)
+ if (i.rex != 0)
add_prefix (REX_OPCODE | i.rex);
/* We are ready to output the insn. */
if (supported != CPU_FLAGS_PERFECT_MATCH)
{
as_bad (_("`%s' is not supported on `%s%s'"),
- current_templates->start->name,
+ current_templates->start->name,
cpu_arch_name ? cpu_arch_name : default_arch,
cpu_sub_arch_name ? cpu_sub_arch_name : "");
return NULL;
In any case, we can't set i.suffix yet. */
for (op = i.operands; --op >= 0;)
if (i.types[op].bitfield.reg8)
- {
+ {
guess_suffix = BYTE_MNEM_SUFFIX;
break;
}
else
{
unsigned int suffixes;
-
+
suffixes = !i.tm.opcode_modifier.no_bsuf;
if (!i.tm.opcode_modifier.no_wsuf)
suffixes |= 1 << 1;
static int
update_imm (unsigned int j)
{
- i386_operand_type overlap;
-
- overlap = operand_type_and (i.types[j], i.tm.operand_types[j]);
+ i386_operand_type overlap = i.types[j];
if ((overlap.bitfield.imm8
|| overlap.bitfield.imm8s
|| overlap.bitfield.imm16
i386_operand_type temp;
operand_type_set (&temp, 0);
- if (i.suffix == BYTE_MNEM_SUFFIX)
+ if (i.suffix == BYTE_MNEM_SUFFIX)
{
temp.bitfield.imm8 = overlap.bitfield.imm8;
temp.bitfield.imm8s = overlap.bitfield.imm8s;
static int
finalize_imm (void)
{
- unsigned int j;
-
- for (j = 0; j < 2; j++)
- if (update_imm (j) == 0)
- return 0;
-
- i.types[2] = operand_type_and (i.types[2], i.tm.operand_types[2]);
- assert (operand_type_check (i.types[2], imm) == 0);
-
- return 1;
-}
-
-static void
-process_drex (void)
-{
- i.drex.modrm_reg = 0;
- i.drex.modrm_regmem = 0;
-
- /* SSE5 4 operand instructions must have the destination the same as
- one of the inputs. Figure out the destination register and cache
- it away in the drex field, and remember which fields to use for
- the modrm byte. */
- if (i.tm.opcode_modifier.drex
- && i.tm.opcode_modifier.drexv
- && i.operands == 4)
- {
- i.tm.extension_opcode = None;
-
- /* Case 1: 4 operand insn, dest = src1, src3 = register. */
- if (i.types[0].bitfield.regxmm != 0
- && i.types[1].bitfield.regxmm != 0
- && i.types[2].bitfield.regxmm != 0
- && i.types[3].bitfield.regxmm != 0
- && i.op[0].regs->reg_num == i.op[3].regs->reg_num
- && i.op[0].regs->reg_flags == i.op[3].regs->reg_flags)
- {
- /* Clear the arguments that are stored in drex. */
- operand_type_set (&i.types[0], 0);
- operand_type_set (&i.types[3], 0);
- i.reg_operands -= 2;
-
- /* There are two different ways to encode a 4 operand
- instruction with all registers that uses OC1 set to
- 0 or 1. Favor setting OC1 to 0 since this mimics the
- actions of other SSE5 assemblers. Use modrm encoding 2
- for register/register. Include the high order bit that
- is normally stored in the REX byte in the register
- field. */
- i.tm.extension_opcode = DREX_X1_XMEM_X2_X1;
- i.drex.modrm_reg = 2;
- i.drex.modrm_regmem = 1;
- i.drex.reg = (i.op[3].regs->reg_num
- + ((i.op[3].regs->reg_flags & RegRex) ? 8 : 0));
- }
-
- /* Case 2: 4 operand insn, dest = src1, src3 = memory. */
- else if (i.types[0].bitfield.regxmm != 0
- && i.types[1].bitfield.regxmm != 0
- && (i.types[2].bitfield.regxmm
- || operand_type_check (i.types[2], anymem))
- && i.types[3].bitfield.regxmm != 0
- && i.op[0].regs->reg_num == i.op[3].regs->reg_num
- && i.op[0].regs->reg_flags == i.op[3].regs->reg_flags)
- {
- /* clear the arguments that are stored in drex */
- operand_type_set (&i.types[0], 0);
- operand_type_set (&i.types[3], 0);
- i.reg_operands -= 2;
-
- /* Specify the modrm encoding for memory addressing. Include
- the high order bit that is normally stored in the REX byte
- in the register field. */
- i.tm.extension_opcode = DREX_X1_X2_XMEM_X1;
- i.drex.modrm_reg = 1;
- i.drex.modrm_regmem = 2;
- i.drex.reg = (i.op[3].regs->reg_num
- + ((i.op[3].regs->reg_flags & RegRex) ? 8 : 0));
- }
-
- /* Case 3: 4 operand insn, dest = src1, src2 = memory. */
- else if (i.types[0].bitfield.regxmm != 0
- && operand_type_check (i.types[1], anymem) != 0
- && i.types[2].bitfield.regxmm != 0
- && i.types[3].bitfield.regxmm != 0
- && i.op[0].regs->reg_num == i.op[3].regs->reg_num
- && i.op[0].regs->reg_flags == i.op[3].regs->reg_flags)
- {
- /* Clear the arguments that are stored in drex. */
- operand_type_set (&i.types[0], 0);
- operand_type_set (&i.types[3], 0);
- i.reg_operands -= 2;
-
- /* Specify the modrm encoding for memory addressing. Include
- the high order bit that is normally stored in the REX byte
- in the register field. */
- i.tm.extension_opcode = DREX_X1_XMEM_X2_X1;
- i.drex.modrm_reg = 2;
- i.drex.modrm_regmem = 1;
- i.drex.reg = (i.op[3].regs->reg_num
- + ((i.op[3].regs->reg_flags & RegRex) ? 8 : 0));
- }
-
- /* Case 4: 4 operand insn, dest = src3, src2 = register. */
- else if (i.types[0].bitfield.regxmm != 0
- && i.types[1].bitfield.regxmm != 0
- && i.types[2].bitfield.regxmm != 0
- && i.types[3].bitfield.regxmm != 0
- && i.op[2].regs->reg_num == i.op[3].regs->reg_num
- && i.op[2].regs->reg_flags == i.op[3].regs->reg_flags)
- {
- /* clear the arguments that are stored in drex */
- operand_type_set (&i.types[2], 0);
- operand_type_set (&i.types[3], 0);
- i.reg_operands -= 2;
-
- /* There are two different ways to encode a 4 operand
- instruction with all registers that uses OC1 set to
- 0 or 1. Favor setting OC1 to 0 since this mimics the
- actions of other SSE5 assemblers. Use modrm encoding
- 2 for register/register. Include the high order bit that
- is normally stored in the REX byte in the register
- field. */
- i.tm.extension_opcode = DREX_XMEM_X1_X2_X2;
- i.drex.modrm_reg = 1;
- i.drex.modrm_regmem = 0;
-
- /* Remember the register, including the upper bits */
- i.drex.reg = (i.op[3].regs->reg_num
- + ((i.op[3].regs->reg_flags & RegRex) ? 8 : 0));
- }
-
- /* Case 5: 4 operand insn, dest = src3, src2 = memory. */
- else if (i.types[0].bitfield.regxmm != 0
- && (i.types[1].bitfield.regxmm
- || operand_type_check (i.types[1], anymem))
- && i.types[2].bitfield.regxmm != 0
- && i.types[3].bitfield.regxmm != 0
- && i.op[2].regs->reg_num == i.op[3].regs->reg_num
- && i.op[2].regs->reg_flags == i.op[3].regs->reg_flags)
- {
- /* Clear the arguments that are stored in drex. */
- operand_type_set (&i.types[2], 0);
- operand_type_set (&i.types[3], 0);
- i.reg_operands -= 2;
-
- /* Specify the modrm encoding and remember the register
- including the bits normally stored in the REX byte. */
- i.tm.extension_opcode = DREX_X1_XMEM_X2_X2;
- i.drex.modrm_reg = 0;
- i.drex.modrm_regmem = 1;
- i.drex.reg = (i.op[3].regs->reg_num
- + ((i.op[3].regs->reg_flags & RegRex) ? 8 : 0));
- }
-
- /* Case 6: 4 operand insn, dest = src3, src1 = memory. */
- else if (operand_type_check (i.types[0], anymem) != 0
- && i.types[1].bitfield.regxmm != 0
- && i.types[2].bitfield.regxmm != 0
- && i.types[3].bitfield.regxmm != 0
- && i.op[2].regs->reg_num == i.op[3].regs->reg_num
- && i.op[2].regs->reg_flags == i.op[3].regs->reg_flags)
- {
- /* clear the arguments that are stored in drex */
- operand_type_set (&i.types[2], 0);
- operand_type_set (&i.types[3], 0);
- i.reg_operands -= 2;
-
- /* Specify the modrm encoding and remember the register
- including the bits normally stored in the REX byte. */
- i.tm.extension_opcode = DREX_XMEM_X1_X2_X2;
- i.drex.modrm_reg = 1;
- i.drex.modrm_regmem = 0;
- i.drex.reg = (i.op[3].regs->reg_num
- + ((i.op[3].regs->reg_flags & RegRex) ? 8 : 0));
- }
-
- else
- as_bad (_("Incorrect operands for the '%s' instruction"),
- i.tm.name);
- }
-
- /* SSE5 instructions with the DREX byte where the only memory operand
- is in the 2nd argument, and the first and last xmm register must
- match, and is encoded in the DREX byte. */
- else if (i.tm.opcode_modifier.drex
- && !i.tm.opcode_modifier.drexv
- && i.operands == 4)
- {
- /* Case 1: 4 operand insn, dest = src1, src3 = reg/mem. */
- if (i.types[0].bitfield.regxmm != 0
- && (i.types[1].bitfield.regxmm
- || operand_type_check(i.types[1], anymem))
- && i.types[2].bitfield.regxmm != 0
- && i.types[3].bitfield.regxmm != 0
- && i.op[0].regs->reg_num == i.op[3].regs->reg_num
- && i.op[0].regs->reg_flags == i.op[3].regs->reg_flags)
- {
- /* clear the arguments that are stored in drex */
- operand_type_set (&i.types[0], 0);
- operand_type_set (&i.types[3], 0);
- i.reg_operands -= 2;
-
- /* Specify the modrm encoding and remember the register
- including the high bit normally stored in the REX
- byte. */
- i.drex.modrm_reg = 2;
- i.drex.modrm_regmem = 1;
- i.drex.reg = (i.op[3].regs->reg_num
- + ((i.op[3].regs->reg_flags & RegRex) ? 8 : 0));
- }
-
- else
- as_bad (_("Incorrect operands for the '%s' instruction"),
- i.tm.name);
- }
-
- /* SSE5 3 operand instructions that the result is a register, being
- either operand can be a memory operand, using OC0 to note which
- one is the memory. */
- else if (i.tm.opcode_modifier.drex
- && i.tm.opcode_modifier.drexv
- && i.operands == 3)
- {
- i.tm.extension_opcode = None;
-
- /* Case 1: 3 operand insn, src1 = register. */
- if (i.types[0].bitfield.regxmm != 0
- && i.types[1].bitfield.regxmm != 0
- && i.types[2].bitfield.regxmm != 0)
- {
- /* Clear the arguments that are stored in drex. */
- operand_type_set (&i.types[2], 0);
- i.reg_operands--;
-
- /* Specify the modrm encoding and remember the register
- including the high bit normally stored in the REX byte. */
- i.tm.extension_opcode = DREX_XMEM_X1_X2;
- i.drex.modrm_reg = 1;
- i.drex.modrm_regmem = 0;
- i.drex.reg = (i.op[2].regs->reg_num
- + ((i.op[2].regs->reg_flags & RegRex) ? 8 : 0));
- }
-
- /* Case 2: 3 operand insn, src1 = memory. */
- else if (operand_type_check (i.types[0], anymem) != 0
- && i.types[1].bitfield.regxmm != 0
- && i.types[2].bitfield.regxmm != 0)
- {
- /* Clear the arguments that are stored in drex. */
- operand_type_set (&i.types[2], 0);
- i.reg_operands--;
-
- /* Specify the modrm encoding and remember the register
- including the high bit normally stored in the REX
- byte. */
- i.tm.extension_opcode = DREX_XMEM_X1_X2;
- i.drex.modrm_reg = 1;
- i.drex.modrm_regmem = 0;
- i.drex.reg = (i.op[2].regs->reg_num
- + ((i.op[2].regs->reg_flags & RegRex) ? 8 : 0));
- }
-
- /* Case 3: 3 operand insn, src2 = memory. */
- else if (i.types[0].bitfield.regxmm != 0
- && operand_type_check (i.types[1], anymem) != 0
- && i.types[2].bitfield.regxmm != 0)
- {
- /* Clear the arguments that are stored in drex. */
- operand_type_set (&i.types[2], 0);
- i.reg_operands--;
-
- /* Specify the modrm encoding and remember the register
- including the high bit normally stored in the REX byte. */
- i.tm.extension_opcode = DREX_X1_XMEM_X2;
- i.drex.modrm_reg = 0;
- i.drex.modrm_regmem = 1;
- i.drex.reg = (i.op[2].regs->reg_num
- + ((i.op[2].regs->reg_flags & RegRex) ? 8 : 0));
- }
-
- else
- as_bad (_("Incorrect operands for the '%s' instruction"),
- i.tm.name);
- }
+ unsigned int j, n;
- /* SSE5 4 operand instructions that are the comparison instructions
- where the first operand is the immediate value of the comparison
- to be done. */
- else if (i.tm.opcode_modifier.drexc != 0 && i.operands == 4)
+ /* Update the first 2 immediate operands. */
+ n = i.operands > 2 ? 2 : i.operands;
+ if (n)
{
- /* Case 1: 4 operand insn, src1 = reg/memory. */
- if (operand_type_check (i.types[0], imm) != 0
- && (i.types[1].bitfield.regxmm
- || operand_type_check (i.types[1], anymem))
- && i.types[2].bitfield.regxmm != 0
- && i.types[3].bitfield.regxmm != 0)
- {
- /* clear the arguments that are stored in drex */
- operand_type_set (&i.types[3], 0);
- i.reg_operands--;
-
- /* Specify the modrm encoding and remember the register
- including the high bit normally stored in the REX byte. */
- i.drex.modrm_reg = 2;
- i.drex.modrm_regmem = 1;
- i.drex.reg = (i.op[3].regs->reg_num
- + ((i.op[3].regs->reg_flags & RegRex) ? 8 : 0));
- }
-
- /* Case 2: 3 operand insn with ImmExt that places the
- opcode_extension as an immediate argument. This is used for
- all of the varients of comparison that supplies the appropriate
- value as part of the instruction. */
- else if ((i.types[0].bitfield.regxmm
- || operand_type_check (i.types[0], anymem))
- && i.types[1].bitfield.regxmm != 0
- && i.types[2].bitfield.regxmm != 0
- && operand_type_check (i.types[3], imm) != 0)
- {
- /* clear the arguments that are stored in drex */
- operand_type_set (&i.types[2], 0);
- i.reg_operands--;
-
- /* Specify the modrm encoding and remember the register
- including the high bit normally stored in the REX byte. */
- i.drex.modrm_reg = 1;
- i.drex.modrm_regmem = 0;
- i.drex.reg = (i.op[2].regs->reg_num
- + ((i.op[2].regs->reg_flags & RegRex) ? 8 : 0));
- }
+ for (j = 0; j < n; j++)
+ if (update_imm (j) == 0)
+ return 0;
- else
- as_bad (_("Incorrect operands for the '%s' instruction"),
- i.tm.name);
+ /* The 3rd operand can't be immediate operand. */
+ gas_assert (operand_type_check (i.types[2], imm) == 0);
}
- else if (i.tm.opcode_modifier.drex
- || i.tm.opcode_modifier.drexv
- || i.tm.opcode_modifier.drexc)
- as_bad (_("Internal error for the '%s' instruction"), i.tm.name);
+ return 1;
}
static int
unnecessary segment overrides. */
const seg_entry *default_seg = 0;
- /* Handle all of the DREX munging that SSE5 needs. */
- if (i.tm.opcode_modifier.drex
- || i.tm.opcode_modifier.drexv
- || i.tm.opcode_modifier.drexc)
- process_drex ();
-
if (i.tm.opcode_modifier.sse2avx
&& (i.tm.opcode_modifier.vexnds
|| i.tm.opcode_modifier.vexndd))
unsigned int j;
/* The destination must be an xmm register. */
- assert (i.reg_operands
- && MAX_OPERANDS > dup
- && operand_type_equal (&i.types[dest], ®xmm));
+ gas_assert (i.reg_operands
+ && MAX_OPERANDS > dup
+ && operand_type_equal (&i.types[dest], ®xmm));
if (i.tm.opcode_modifier.firstxmm0)
{
/* The first operand is implicit and must be xmm0. */
- assert (operand_type_equal (&i.types[0], ®xmm));
+ gas_assert (operand_type_equal (&i.types[0], ®xmm));
if (i.op[0].regs->reg_num != 0)
return bad_implicit_operand (1);
}
}
else if (i.tm.opcode_modifier.implicit1stxmm0)
- {
- assert ((MAX_OPERANDS - 1) > dup
- && i.tm.opcode_modifier.vex3sources);
+ {
+ gas_assert ((MAX_OPERANDS - 1) > dup
+ && i.tm.opcode_modifier.vex3sources);
/* Add the implicit xmm0 for instructions with VEX prefix
and 3 sources. */
}
i.op[0].regs
= (const reg_entry *) hash_find (reg_hash, "xmm0");
- i.types[0] = regxmm;
+ i.types[0] = regxmm;
i.tm.operand_types[0] = regxmm;
i.operands += 2;
unsigned int j;
/* The first operand is implicit and must be xmm0/ymm0. */
- assert (i.reg_operands
- && (operand_type_equal (&i.types[0], ®xmm)
- || operand_type_equal (&i.types[0], ®ymm)));
+ gas_assert (i.reg_operands
+ && (operand_type_equal (&i.types[0], ®xmm)
+ || operand_type_equal (&i.types[0], ®ymm)));
if (i.op[0].regs->reg_num != 0)
return bad_implicit_operand (i.types[0].bitfield.regxmm);
else
first_reg_op = 1;
/* Pretend we saw the extra register operand. */
- assert (i.reg_operands == 1
- && i.op[first_reg_op + 1].regs == 0);
+ gas_assert (i.reg_operands == 1
+ && i.op[first_reg_op + 1].regs == 0);
i.op[first_reg_op + 1].regs = i.op[first_reg_op].regs;
i.types[first_reg_op + 1] = i.types[first_reg_op];
i.operands++;
}
else
{
- /* The register or float register operand is in operand
+ /* The register or float register operand is in operand
0 or 1. */
unsigned int op;
-
- if (i.types[0].bitfield.floatreg
- || operand_type_check (i.types[0], reg))
- op = 0;
- else
- op = 1;
+
+ if (i.types[0].bitfield.floatreg
+ || operand_type_check (i.types[0], reg))
+ op = 0;
+ else
+ op = 1;
/* Register goes in low 3 bits of opcode. */
i.tm.base_opcode |= i.op[op].regs->reg_num;
if ((i.op[op].regs->reg_flags & RegRex) != 0)
{
/* Reversed arguments on faddp, fsubp, etc. */
as_warn (_("translating to `%s %s%s,%s%s'"), i.tm.name,
- register_prefix, i.op[1].regs->reg_name,
- register_prefix, i.op[0].regs->reg_name);
+ register_prefix, i.op[!intel_syntax].regs->reg_name,
+ register_prefix, i.op[intel_syntax].regs->reg_name);
}
else
{
{
const seg_entry *default_seg = 0;
unsigned int source, dest;
- int vex_3_sources;
+ int vex_3_sources;
/* The first operand of instructions with VEX prefix and 3 sources
must be VEX_Imm4. */
{
unsigned int nds, reg;
+ if (i.tm.opcode_modifier.veximmext
+ && i.tm.opcode_modifier.immext)
+ {
+ dest = i.operands - 2;
+ gas_assert (dest == 3);
+ }
+ else
dest = i.operands - 1;
nds = dest - 1;
- source = 1;
- reg = 0;
-
- /* This instruction must have 4 operands: 4 register operands
- or 3 register operands plus 1 memory operand. It must have
- VexNDS and VexImmExt. */
- assert (i.operands == 4
- && (i.reg_operands == 4
- || (i.reg_operands == 3 && i.mem_operands == 1))
- && i.tm.opcode_modifier.vexnds
- && i.tm.opcode_modifier.veximmext
- && (operand_type_equal (&i.tm.operand_types[dest],
- ®xmm)
- || operand_type_equal (&i.tm.operand_types[dest],
- ®ymm))
- && (operand_type_equal (&i.tm.operand_types[nds],
- ®xmm)
- || operand_type_equal (&i.tm.operand_types[nds],
- ®ymm))
- && (operand_type_equal (&i.tm.operand_types[reg],
- ®xmm)
- || operand_type_equal (&i.tm.operand_types[reg],
- ®ymm)));
+
+ /* This instruction must have 4 register operands
+ or 3 register operands plus 1 memory operand.
+ It must have VexNDS and VexImmExt. */
+ gas_assert ((i.reg_operands == 4
+ || (i.reg_operands == 3 && i.mem_operands == 1))
+ && i.tm.opcode_modifier.vexnds
+ && i.tm.opcode_modifier.veximmext
+ && (operand_type_equal (&i.tm.operand_types[dest], ®xmm)
+ || operand_type_equal (&i.tm.operand_types[dest], ®ymm)));
/* Generate an 8bit immediate operand to encode the register
operand. */
i.op[i.operands].imms = exp;
i.types[i.operands] = imm8;
i.operands++;
+ /* If VexW1 is set, the first operand is the source and
+ the second operand is encoded in the immediate operand. */
+ if (i.tm.opcode_modifier.vexw1)
+ {
+ source = 0;
+ reg = 1;
+ }
+ else
+ {
+ source = 1;
+ reg = 0;
+ }
+ /* FMA4 swaps REG and NDS. */
+ if (i.tm.cpu_flags.bitfield.cpufma4)
+ {
+ unsigned int tmp;
+ tmp = reg;
+ reg = nds;
+ nds = tmp;
+ }
+ gas_assert ((operand_type_equal (&i.tm.operand_types[reg], ®xmm)
+ || operand_type_equal (&i.tm.operand_types[reg],
+ ®ymm))
+ && (operand_type_equal (&i.tm.operand_types[nds], ®xmm)
+ || operand_type_equal (&i.tm.operand_types[nds],
+ ®ymm)));
exp->X_op = O_constant;
exp->X_add_number
- = ((i.op[0].regs->reg_num
- + ((i.op[0].regs->reg_flags & RegRex) ? 8 : 0)) << 4);
-
+ = ((i.op[reg].regs->reg_num
+ + ((i.op[reg].regs->reg_flags & RegRex) ? 8 : 0)) << 4);
i.vex.register_specifier = i.op[nds].regs;
}
else
source = dest = 0;
- /* SSE5 4 operand instructions are encoded in such a way that one of
- the inputs must match the destination register. Process_drex hides
- the 3rd argument in the drex field, so that by the time we get
- here, it looks to GAS as if this is a 2 operand instruction. */
- if ((i.tm.opcode_modifier.drex
- || i.tm.opcode_modifier.drexv
- || i.tm.opcode_modifier.drexc)
- && i.reg_operands == 2)
- {
- const reg_entry *reg = i.op[i.drex.modrm_reg].regs;
- const reg_entry *regmem = i.op[i.drex.modrm_regmem].regs;
-
- i.rm.reg = reg->reg_num;
- i.rm.regmem = regmem->reg_num;
- i.rm.mode = 3;
- if ((reg->reg_flags & RegRex) != 0)
- i.rex |= REX_R;
- if ((regmem->reg_flags & RegRex) != 0)
- i.rex |= REX_B;
- }
-
/* i.reg_operands MUST be the number of real register operands;
implicit registers do not count. If there are 3 register
operands, it must be a instruction with VexNDS. For a
instruction with VexNDD, the destination register is encoded
in VEX prefix. If there are 4 register operands, it must be
a instruction with VEX prefix and 3 sources. */
- else if (i.mem_operands == 0
- && ((i.reg_operands == 2
- && !i.tm.opcode_modifier.vexndd)
- || (i.reg_operands == 3
- && i.tm.opcode_modifier.vexnds)
- || (i.reg_operands == 4 && vex_3_sources)))
+ if (i.mem_operands == 0
+ && ((i.reg_operands == 2
+ && !i.tm.opcode_modifier.vexndd)
+ || (i.reg_operands == 3
+ && i.tm.opcode_modifier.vexnds)
+ || (i.reg_operands == 4 && vex_3_sources)))
{
switch (i.operands)
{
which may be the first or the last operand. Otherwise,
the first operand must be shift count register (cl) or it
is an instruction with VexNDS. */
- assert (i.imm_operands == 1
- || (i.imm_operands == 0
- && (i.tm.opcode_modifier.vexnds
- || i.types[0].bitfield.shiftcount)));
+ gas_assert (i.imm_operands == 1
+ || (i.imm_operands == 0
+ && (i.tm.opcode_modifier.vexnds
+ || i.types[0].bitfield.shiftcount)));
if (operand_type_check (i.types[0], imm)
|| i.types[0].bitfield.shiftcount)
source = 1;
For instructions with VexNDS, if the first operand
an imm8, the source operand is the 2nd one. If the last
operand is imm8, the source operand is the first one. */
- assert ((i.imm_operands == 2
- && i.types[0].bitfield.imm8
- && i.types[1].bitfield.imm8)
- || (i.tm.opcode_modifier.vexnds
- && i.imm_operands == 1
- && (i.types[0].bitfield.imm8
- || i.types[i.operands - 1].bitfield.imm8)));
+ gas_assert ((i.imm_operands == 2
+ && i.types[0].bitfield.imm8
+ && i.types[1].bitfield.imm8)
+ || (i.tm.opcode_modifier.vexnds
+ && i.imm_operands == 1
+ && (i.types[0].bitfield.imm8
+ || i.types[i.operands - 1].bitfield.imm8)));
if (i.tm.opcode_modifier.vexnds)
{
if (i.types[0].bitfield.imm8)
unsigned int fake_zero_displacement = 0;
unsigned int op;
- /* This has been precalculated for SSE5 instructions
- that have a DREX field earlier in process_drex. */
- if (i.tm.opcode_modifier.drex
- || i.tm.opcode_modifier.drexv
- || i.tm.opcode_modifier.drexc)
- op = i.drex.modrm_regmem;
- else
- {
- for (op = 0; op < i.operands; op++)
- if (operand_type_check (i.types[op], anymem))
- break;
- assert (op < i.operands);
- }
+ for (op = 0; op < i.operands; op++)
+ if (operand_type_check (i.types[op], anymem))
+ break;
+ gas_assert (op < i.operands);
default_seg = &ds;
holds the correct displacement size. */
expressionS *exp;
- assert (i.op[op].disps == 0);
+ gas_assert (i.op[op].disps == 0);
exp = &disp_expressions[i.disp_operands++];
i.op[op].disps = exp;
exp->X_op = O_constant;
if (i.reg_operands)
{
unsigned int op;
+ unsigned int vex_reg = ~0;
+
+ for (op = 0; op < i.operands; op++)
+ if (i.types[op].bitfield.reg8
+ || i.types[op].bitfield.reg16
+ || i.types[op].bitfield.reg32
+ || i.types[op].bitfield.reg64
+ || i.types[op].bitfield.regmmx
+ || i.types[op].bitfield.regxmm
+ || i.types[op].bitfield.regymm
+ || i.types[op].bitfield.sreg2
+ || i.types[op].bitfield.sreg3
+ || i.types[op].bitfield.control
+ || i.types[op].bitfield.debug
+ || i.types[op].bitfield.test)
+ break;
- /* This has been precalculated for SSE5 instructions
- that have a DREX field earlier in process_drex. */
- if (i.tm.opcode_modifier.drex
- || i.tm.opcode_modifier.drexv
- || i.tm.opcode_modifier.drexc)
- {
- op = i.drex.modrm_reg;
- i.rm.reg = i.op[op].regs->reg_num;
- if ((i.op[op].regs->reg_flags & RegRex) != 0)
- i.rex |= REX_R;
- }
- else
+ if (vex_3_sources)
+ op = dest;
+ else if (i.tm.opcode_modifier.vexnds)
{
- unsigned int vex_reg = ~0;
-
- for (op = 0; op < i.operands; op++)
- if (i.types[op].bitfield.reg8
- || i.types[op].bitfield.reg16
- || i.types[op].bitfield.reg32
- || i.types[op].bitfield.reg64
- || i.types[op].bitfield.regmmx
- || i.types[op].bitfield.regxmm
- || i.types[op].bitfield.regymm
- || i.types[op].bitfield.sreg2
- || i.types[op].bitfield.sreg3
- || i.types[op].bitfield.control
- || i.types[op].bitfield.debug
- || i.types[op].bitfield.test)
- break;
+ /* For instructions with VexNDS, the register-only
+ source operand is encoded in VEX prefix. */
+ gas_assert (mem != (unsigned int) ~0);
- if (vex_3_sources)
- op = dest;
- else if (i.tm.opcode_modifier.vexnds)
+ if (op > mem)
{
- /* For instructions with VexNDS, the register-only
- source operand is encoded in VEX prefix. */
- assert (mem != (unsigned int) ~0);
-
- if (op > mem)
- {
- vex_reg = op++;
- assert (op < i.operands);
- }
- else
- {
- vex_reg = op + 1;
- assert (vex_reg < i.operands);
- }
+ vex_reg = op++;
+ gas_assert (op < i.operands);
}
- else if (i.tm.opcode_modifier.vexndd)
+ else
{
- /* For instructions with VexNDD, there should be
- no memory operand and the register destination
- is encoded in VEX prefix. */
- assert (i.mem_operands == 0
- && (op + 2) == i.operands);
vex_reg = op + 1;
+ gas_assert (vex_reg < i.operands);
}
- else
- assert (op < i.operands);
+ }
+ else if (i.tm.opcode_modifier.vexndd)
+ {
+ /* For instructions with VexNDD, there should be
+ no memory operand and the register destination
+ is encoded in VEX prefix. */
+ gas_assert (i.mem_operands == 0
+ && (op + 2) == i.operands);
+ vex_reg = op + 1;
+ }
+ else
+ gas_assert (op < i.operands);
- if (vex_reg != (unsigned int) ~0)
- {
- assert (i.reg_operands == 2);
-
- if (!operand_type_equal (&i.tm.operand_types[vex_reg],
- & regxmm)
- && !operand_type_equal (&i.tm.operand_types[vex_reg],
- ®ymm))
- abort ();
- i.vex.register_specifier = i.op[vex_reg].regs;
- }
+ if (vex_reg != (unsigned int) ~0)
+ {
+ gas_assert (i.reg_operands == 2);
- /* If there is an extension opcode to put here, the
- register number must be put into the regmem field. */
- if (i.tm.extension_opcode != None)
- {
- i.rm.regmem = i.op[op].regs->reg_num;
- if ((i.op[op].regs->reg_flags & RegRex) != 0)
- i.rex |= REX_B;
- }
- else
- {
- i.rm.reg = i.op[op].regs->reg_num;
- if ((i.op[op].regs->reg_flags & RegRex) != 0)
- i.rex |= REX_R;
- }
+ if (!operand_type_equal (&i.tm.operand_types[vex_reg],
+ & regxmm)
+ && !operand_type_equal (&i.tm.operand_types[vex_reg],
+ ®ymm))
+ abort ();
+ i.vex.register_specifier = i.op[vex_reg].regs;
+ }
+
+ /* If there is an extension opcode to put here, the
+ register number must be put into the regmem field. */
+ if (i.tm.extension_opcode != None)
+ {
+ i.rm.regmem = i.op[op].regs->reg_num;
+ if ((i.op[op].regs->reg_flags & RegRex) != 0)
+ i.rex |= REX_B;
+ }
+ else
+ {
+ i.rm.reg = i.op[op].regs->reg_num;
+ if ((i.op[op].regs->reg_flags & RegRex) != 0)
+ i.rex |= REX_R;
}
/* Now, if no memory operand has set i.rm.mode = 0, 1, 2 we
}
/* Fill in i.rm.reg field with extension opcode (if any). */
- if (i.tm.extension_opcode != None
- && !(i.tm.opcode_modifier.drex
- || i.tm.opcode_modifier.drexv
- || i.tm.opcode_modifier.drexc))
+ if (i.tm.extension_opcode != None)
i.rm.reg = i.tm.extension_opcode;
}
return default_seg;
/* Put out high byte first: can't use md_number_to_chars! */
*p++ = (i.tm.base_opcode >> 8) & 0xff;
*p = i.tm.base_opcode & 0xff;
-
- /* On SSE5, encode the OC1 bit in the DREX field if this
- encoding has multiple formats. */
- if (i.tm.opcode_modifier.drex
- && i.tm.opcode_modifier.drexv
- && DREX_OC1 (i.tm.extension_opcode))
- *p |= DREX_OC1_MASK;
}
/* Now the modrm byte and sib byte (if present). */
| i.sib.scale << 6));
}
- /* Write the DREX byte if needed. */
- if (i.tm.opcode_modifier.drex || i.tm.opcode_modifier.drexc)
- {
- p = frag_more (1);
- *p = (((i.drex.reg & 0xf) << 4) | (i.drex.rex & 0x7));
-
- /* Encode the OC0 bit if this encoding has multiple
- formats. */
- if ((i.tm.opcode_modifier.drex
- || i.tm.opcode_modifier.drexv)
- && DREX_OC0 (i.tm.extension_opcode))
- *p |= DREX_OC0_MASK;
- }
-
if (i.disp_operands)
output_disp (insn_start_frag, insn_start_off);
int pcrel = (i.flags[n] & Operand_PCrel) != 0;
/* We can't have 8 bit displacement here. */
- assert (!i.types[n].bitfield.disp8);
+ gas_assert (!i.types[n].bitfield.disp8);
/* The PC relative address is computed relative
to the instruction boundary, so in case immediate
{
/* Only one immediate is allowed for PC
relative address. */
- assert (sz == 0);
+ gas_assert (sz == 0);
sz = imm_size (n1);
i.op[n].disps->X_add_number -= sz;
}
/* We should find the immediate. */
- assert (sz != 0);
+ gas_assert (sz != 0);
}
p = frag_more (size);
OPERAND_TYPE_NONE },
{ "DTPOFF", { BFD_RELOC_386_TLS_LDO_32,
BFD_RELOC_X86_64_DTPOFF32 },
-
+
OPERAND_TYPE_IMM32_32S_64_DISP32_64 },
{ "GOTNTPOFF",{ BFD_RELOC_386_TLS_GOTIE,
0 },
void
x86_cons (expressionS *exp, int size)
{
+ intel_syntax = -intel_syntax;
+
if (size == 4 || (object_64bit && size == 8))
{
/* Handle @GOTOFF and the like in an expression. */
}
else
expression (exp);
+
+ intel_syntax = -intel_syntax;
+
+ if (intel_syntax)
+ i386_intel_simplify (exp);
}
#endif
input_line_pointer = save_input_line_pointer;
if (gotfree_input_line)
- free (gotfree_input_line);
+ {
+ free (gotfree_input_line);
+
+ if (exp->X_op == O_constant || exp->X_op == O_register)
+ exp->X_op = O_illegal;
+ }
- if (exp->X_op == O_absent
- || exp->X_op == O_illegal
- || exp->X_op == O_big
- || (gotfree_input_line
- && (exp->X_op == O_constant
- || exp->X_op == O_register)))
+ return i386_finalize_immediate (exp_seg, exp, types, imm_start);
+}
+
+static int
+i386_finalize_immediate (segT exp_seg ATTRIBUTE_UNUSED, expressionS *exp,
+ i386_operand_type types, const char *imm_start)
+{
+ if (exp->X_op == O_absent || exp->X_op == O_illegal || exp->X_op == O_big)
{
as_bad (_("missing or invalid immediate expression `%s'"),
imm_start);
#endif
input_line_pointer = save_input_line_pointer;
if (gotfree_input_line)
- free (gotfree_input_line);
- ret = 1;
+ {
+ free (gotfree_input_line);
+
+ if (exp->X_op == O_constant || exp->X_op == O_register)
+ exp->X_op = O_illegal;
+ }
+
+ ret = i386_finalize_displacement (exp_seg, exp, types, disp_start);
+
+ RESTORE_END_STRING (disp_end);
+
+ return ret;
+}
+
+static int
+i386_finalize_displacement (segT exp_seg ATTRIBUTE_UNUSED, expressionS *exp,
+ i386_operand_type types, const char *disp_start)
+{
+ i386_operand_type bigdisp;
+ int ret = 1;
/* We do this to make sure that the section symbol is in
the symbol table. We will ultimately change the relocation
else if (exp->X_op == O_absent
|| exp->X_op == O_illegal
- || exp->X_op == O_big
- || (gotfree_input_line
- && (exp->X_op == O_constant
- || exp->X_op == O_register)))
+ || exp->X_op == O_big)
{
inv_disp:
as_bad (_("missing or invalid displacement expression `%s'"),
}
#endif
- RESTORE_END_STRING (disp_end);
-
/* Check if this is a displacement only operand. */
bigdisp = i.types[this_operand];
bigdisp.bitfield.disp8 = 0;
: i386_regtab[j].reg_type.bitfield.reg16)
&& i386_regtab[j].reg_num == expected)
break;
- assert (j < i386_regtab_size);
+ gas_assert (j < i386_regtab_size);
as_warn (_("`%s' is not valid here (expected `%c%s%s%c')"),
operand_string,
intel_syntax ? '[' : '(',
#if defined (OBJ_ELF) || defined (OBJ_MAYBE_ELF)
|| (IS_ELF
&& (S_IS_EXTERNAL (fragP->fr_symbol)
- || S_IS_WEAK (fragP->fr_symbol)))
+ || S_IS_WEAK (fragP->fr_symbol)
+ || ((symbol_get_bfdsym (fragP->fr_symbol)->flags
+ & BSF_GNU_INDIRECT_FUNCTION))))
+#endif
+#if defined (OBJ_COFF) && defined (TE_PE)
+ || (OUTPUT_FLAVOR == bfd_target_coff_flavour
+ && S_IS_WEAK (fragP->fr_symbol))
#endif
)
{
if ((sym_seg == seg
|| (symbol_section_p (fixP->fx_addsy)
&& sym_seg != absolute_section))
- && !generic_force_reloc (fixP))
+ && !TC_FORCE_RELOCATION (fixP))
{
/* Yes, we add the values in twice. This is because
bfd_install_relocation subtracts them out again. I think
value += md_pcrel_from (fixP);
#endif
}
+#if defined (OBJ_COFF) && defined (TE_PE)
+ if (fixP->fx_addsy != NULL && S_IS_WEAK (fixP->fx_addsy))
+ {
+ value -= S_GET_VALUE (fixP->fx_addsy);
+ }
+#endif
/* Fix a few things - the dynamic linker expects certain values here,
and we must not disappoint it. */
/* Are we finished with this relocation now? */
if (fixP->fx_addsy == NULL)
fixP->fx_done = 1;
+#if defined (OBJ_COFF) && defined (TE_PE)
+ else if (fixP->fx_addsy != NULL && S_IS_WEAK (fixP->fx_addsy))
+ {
+ fixP->fx_done = 0;
+ /* Remember value for tc_gen_reloc. */
+ fixP->fx_addnumber = value;
+ /* Clear out the frag for now. */
+ value = 0;
+ }
+#endif
else if (use_rela_relocations)
{
fixP->fx_no_overflow = 1;
&& !cpu_arch_flags.bitfield.cpui386)
return (const reg_entry *) NULL;
+ if (r->reg_type.bitfield.floatreg
+ && !cpu_arch_flags.bitfield.cpu8087
+ && !cpu_arch_flags.bitfield.cpu287
+ && !cpu_arch_flags.bitfield.cpu387)
+ return (const reg_entry *) NULL;
+
if (r->reg_type.bitfield.regmmx && !cpu_arch_flags.bitfield.cpummx)
return (const reg_entry *) NULL;
}
input_line_pointer = end;
*end = 0;
- return 0;
+ return intel_syntax ? i386_intel_parse_name (name, e) : 0;
}
void
md_operand (expressionS *e)
{
- if (*input_line_pointer == REGISTER_PREFIX)
- {
- char *end;
- const reg_entry *r = parse_real_register (input_line_pointer, &end);
+ char *end;
+ const reg_entry *r;
+ switch (*input_line_pointer)
+ {
+ case REGISTER_PREFIX:
+ r = parse_real_register (input_line_pointer, &end);
if (r)
{
e->X_op = O_register;
e->X_add_number = r - i386_regtab;
input_line_pointer = end;
}
+ break;
+
+ case '[':
+ gas_assert (intel_syntax);
+ end = input_line_pointer++;
+ expression (e);
+ if (*input_line_pointer == ']')
+ {
+ ++input_line_pointer;
+ e->X_op_symbol = make_expr_symbol (e);
+ e->X_add_symbol = NULL;
+ e->X_add_number = 0;
+ e->X_op = O_index;
+ }
+ else
+ {
+ e->X_op = O_absent;
+ input_line_pointer = end;
+ }
+ break;
}
}
struct option md_longopts[] =
{
{"32", no_argument, NULL, OPTION_32},
-#if defined (OBJ_ELF) || defined (OBJ_MAYBE_ELF) || defined(TE_PEP)
+#if (defined (OBJ_ELF) || defined (OBJ_MAYBE_ELF) \
+ || defined (TE_PE) || defined (TE_PEP))
{"64", no_argument, NULL, OPTION_64},
#endif
{"divide", no_argument, NULL, OPTION_DIVIDE},
.stab instead of .stab.excl. We always use .stab anyhow. */
break;
#endif
-#if defined (OBJ_ELF) || defined (OBJ_MAYBE_ELF) || defined(TE_PEP)
+#if (defined (OBJ_ELF) || defined (OBJ_MAYBE_ELF) \
+ || defined (TE_PE) || defined (TE_PEP))
case OPTION_64:
{
const char **list, **l;
{
/* ISA entension. */
i386_cpu_flags flags;
- flags = cpu_flags_or (cpu_arch_flags,
- cpu_arch[i].flags);
+
+ if (strncmp (arch, "no", 2))
+ flags = cpu_flags_or (cpu_arch_flags,
+ cpu_arch[i].flags);
+ else
+ flags = cpu_flags_and_not (cpu_arch_flags,
+ cpu_arch[i].flags);
if (!cpu_flags_equal (&flags, &cpu_arch_flags))
{
if (cpu_sub_arch_name)
fprintf (stream, _("\
-s ignored\n"));
#endif
-#if defined (OBJ_ELF) || defined (OBJ_MAYBE_ELF) || defined(TE_PEP)
+#if (defined (OBJ_ELF) || defined (OBJ_MAYBE_ELF) \
+ || defined (TE_PE) || defined (TE_PEP))
fprintf (stream, _("\
--32/--64 generate 32bit/64bit code\n"));
#endif
generate code for CPU and EXTENSION, CPU is one of:\n\
i8086, i186, i286, i386, i486, pentium, pentiumpro,\n\
pentiumii, pentiumiii, pentium4, prescott, nocona,\n\
- core, core2, corei7, k6, k6_2, athlon, k8, amdfam10,\n\
- generic32, generic64\n\
+ core, core2, corei7, l1om, k6, k6_2, athlon, k8,\n\
+ amdfam10, generic32, generic64\n\
EXTENSION is combination of:\n\
- mmx, sse, sse2, sse3, ssse3, sse4.1, sse4.2, sse4,\n\
- avx, vmx, smx, xsave, movbe, ept, aes, pclmul, fma,\n\
+ 8087, 287, 387, no87, mmx, nommx, sse, sse2, sse3,\n\
+ ssse3, sse4.1, sse4.2, sse4, nosse, avx, noavx,\n\
+ vmx, smx, xsave, movbe, ept, aes, pclmul, fma,\n\
clflush, syscall, rdtscp, 3dnow, 3dnowa, sse4a,\n\
- sse5, svme, abm, padlock\n"));
+ svme, abm, padlock, fma4\n"));
fprintf (stream, _("\
-mtune=CPU optimize for CPU, CPU is one of:\n\
i8086, i186, i286, i386, i486, pentium, pentiumpro,\n\
pentiumii, pentiumiii, pentium4, prescott, nocona,\n\
- core, core2, corei7, k6, k6_2, athlon, k8, amdfam10,\n\
- generic32, generic64\n"));
+ core, core2, corei7, l1om, k6, k6_2, athlon, k8,\n\
+ amdfam10, generic32, generic64\n"));
fprintf (stream, _("\
-msse2avx encode SSE instructions with VEX prefix\n"));
fprintf (stream, _("\
}
#if ((defined (OBJ_MAYBE_COFF) && defined (OBJ_MAYBE_AOUT)) \
- || defined (OBJ_ELF) || defined (OBJ_MAYBE_ELF) || defined (TE_PEP))
+ || defined (OBJ_ELF) || defined (OBJ_MAYBE_ELF) \
+ || defined (TE_PE) || defined (TE_PEP) || defined (OBJ_MACH_O))
/* Pick the target format to use. */
cpu_arch_isa_flags.bitfield.cpummx= 1;
cpu_arch_isa_flags.bitfield.cpusse = 1;
cpu_arch_isa_flags.bitfield.cpusse2 = 1;
+ cpu_arch_isa_flags.bitfield.cpulm = 1;
}
if (cpu_flags_all_zero (&cpu_arch_tune_flags))
{
as_fatal (_("Unknown architecture"));
switch (OUTPUT_FLAVOR)
{
-#ifdef TE_PEP
+#if defined (TE_PE) || defined (TE_PEP)
case bfd_target_coff_flavour:
- return flag_code == CODE_64BIT ? COFF_TARGET_FORMAT : "pe-i386";
- break;
+ return flag_code == CODE_64BIT ? "pe-x86-64" : "pe-i386";
#endif
#ifdef OBJ_MAYBE_AOUT
case bfd_target_aout_flavour:
object_64bit = 1;
use_rela_relocations = 1;
}
- return flag_code == CODE_64BIT ? ELF_TARGET_FORMAT64 : ELF_TARGET_FORMAT;
+ if (cpu_arch_isa_flags.bitfield.cpul1om)
+ {
+ if (flag_code != CODE_64BIT)
+ as_fatal (_("Intel L1OM is 64bit only"));
+ return ELF_TARGET_L1OM_FORMAT;
+ }
+ else
+ return (flag_code == CODE_64BIT
+ ? ELF_TARGET_FORMAT64 : ELF_TARGET_FORMAT);
}
+#endif
+#if defined (OBJ_MACH_O)
+ case bfd_target_mach_o_flavour:
+ return flag_code == CODE_64BIT ? "mach-o-x86-64" : "mach-o-i386";
#endif
default:
abort ();
vtable entry to be used in the relocation's section offset. */
if (fixp->fx_r_type == BFD_RELOC_VTABLE_ENTRY)
rel->address = fixp->fx_offset;
-
+#if defined (OBJ_COFF) && defined (TE_PE)
+ else if (fixp->fx_addsy && S_IS_WEAK (fixp->fx_addsy))
+ rel->addend = fixp->fx_addnumber - (S_GET_VALUE (fixp->fx_addsy) * 2);
+ else
+#endif
rel->addend = 0;
}
/* Use the rela in 64bit mode. */
bfd_get_reloc_code_name (code));
/* Set howto to a garbage value so that we can keep going. */
rel->howto = bfd_reloc_type_lookup (stdoutput, BFD_RELOC_32);
- assert (rel->howto != NULL);
+ gas_assert (rel->howto != NULL);
}
return rel;
}
-\f
-/* Parse operands using Intel syntax. This implements a recursive descent
- parser based on the BNF grammar published in Appendix B of the MASM 6.1
- Programmer's Guide.
-
- FIXME: We do not recognize the full operand grammar defined in the MASM
- documentation. In particular, all the structure/union and
- high-level macro operands are missing.
-
- Uppercase words are terminals, lower case words are non-terminals.
- Objects surrounded by double brackets '[[' ']]' are optional. Vertical
- bars '|' denote choices. Most grammar productions are implemented in
- functions called 'intel_<production>'.
-
- Initial production is 'expr'.
-
- addOp + | -
-
- alpha [a-zA-Z]
-
- binOp & | AND | \| | OR | ^ | XOR
-
- byteRegister AL | AH | BL | BH | CL | CH | DL | DH
-
- constant digits [[ radixOverride ]]
-
- dataType BYTE | WORD | DWORD | FWORD | QWORD | TBYTE | OWORD | XMMWORD | YMMWORD
-
- digits decdigit
- | digits decdigit
- | digits hexdigit
-
- decdigit [0-9]
-
- e04 e04 addOp e05
- | e05
-
- e05 e05 binOp e06
- | e06
-
- e06 e06 mulOp e09
- | e09
-
- e09 OFFSET e10
- | SHORT e10
- | + e10
- | - e10
- | ~ e10
- | NOT e10
- | e09 PTR e10
- | e09 : e10
- | e10
-
- e10 e10 [ expr ]
- | e11
-
- e11 ( expr )
- | [ expr ]
- | constant
- | dataType
- | id
- | $
- | register
-
- => expr expr cmpOp e04
- | e04
-
- gpRegister AX | EAX | BX | EBX | CX | ECX | DX | EDX
- | BP | EBP | SP | ESP | DI | EDI | SI | ESI
-
- hexdigit a | b | c | d | e | f
- | A | B | C | D | E | F
-
- id alpha
- | id alpha
- | id decdigit
-
- mulOp * | / | % | MOD | << | SHL | >> | SHR
-
- quote " | '
-
- register specialRegister
- | gpRegister
- | byteRegister
-
- segmentRegister CS | DS | ES | FS | GS | SS
-
- specialRegister CR0 | CR2 | CR3 | CR4
- | DR0 | DR1 | DR2 | DR3 | DR6 | DR7
- | TR3 | TR4 | TR5 | TR6 | TR7
-
- We simplify the grammar in obvious places (e.g., register parsing is
- done by calling parse_register) and eliminate immediate left recursion
- to implement a recursive-descent parser.
-
- expr e04 expr'
-
- expr' cmpOp e04 expr'
- | Empty
-
- e04 e05 e04'
-
- e04' addOp e05 e04'
- | Empty
-
- e05 e06 e05'
-
- e05' binOp e06 e05'
- | Empty
-
- e06 e09 e06'
-
- e06' mulOp e09 e06'
- | Empty
-
- e09 OFFSET e10 e09'
- | SHORT e10'
- | + e10'
- | - e10'
- | ~ e10'
- | NOT e10'
- | e10 e09'
-
- e09' PTR e10 e09'
- | : e10 e09'
- | Empty
-
- e10 e11 e10'
-
- e10' [ expr ] e10'
- | Empty
-
- e11 ( expr )
- | [ expr ]
- | BYTE
- | WORD
- | DWORD
- | FWORD
- | QWORD
- | TBYTE
- | OWORD
- | XMMWORD
- | YMMWORD
- | .
- | $
- | register
- | id
- | constant */
-
-/* Parsing structure for the intel syntax parser. Used to implement the
- semantic actions for the operand grammar. */
-struct intel_parser_s
- {
- char *op_string; /* The string being parsed. */
- int got_a_float; /* Whether the operand is a float. */
- int op_modifier; /* Operand modifier. */
- int is_mem; /* 1 if operand is memory reference. */
- int in_offset; /* >=1 if parsing operand of offset. */
- int in_bracket; /* >=1 if parsing operand in brackets. */
- const reg_entry *reg; /* Last register reference found. */
- char *disp; /* Displacement string being built. */
- char *next_operand; /* Resume point when splitting operands. */
- };
-
-static struct intel_parser_s intel_parser;
-
-/* Token structure for parsing intel syntax. */
-struct intel_token
- {
- int code; /* Token code. */
- const reg_entry *reg; /* Register entry for register tokens. */
- char *str; /* String representation. */
- };
-
-static struct intel_token cur_token, prev_token;
-
-/* Token codes for the intel parser. Since T_SHORT is already used
- by COFF, undefine it first to prevent a warning. */
-#define T_NIL -1
-#define T_CONST 1
-#define T_REG 2
-#define T_BYTE 3
-#define T_WORD 4
-#define T_DWORD 5
-#define T_FWORD 6
-#define T_QWORD 7
-#define T_TBYTE 8
-#define T_XMMWORD 9
-#undef T_SHORT
-#define T_SHORT 10
-#define T_OFFSET 11
-#define T_PTR 12
-#define T_ID 13
-#define T_SHL 14
-#define T_SHR 15
-#define T_YMMWORD 16
-
-/* Prototypes for intel parser functions. */
-static int intel_match_token (int);
-static void intel_putback_token (void);
-static void intel_get_token (void);
-static int intel_expr (void);
-static int intel_e04 (void);
-static int intel_e05 (void);
-static int intel_e06 (void);
-static int intel_e09 (void);
-static int intel_e10 (void);
-static int intel_e11 (void);
-
-static int
-i386_intel_operand (char *operand_string, int got_a_float)
-{
- int ret;
- char *p;
- const reg_entry *final_base = i.base_reg;
- const reg_entry *final_index = i.index_reg;
-
- p = intel_parser.op_string = xstrdup (operand_string);
- intel_parser.disp = (char *) xmalloc (strlen (operand_string) + 1);
-
- for (;;)
- {
- /* Initialize token holders. */
- cur_token.code = prev_token.code = T_NIL;
- cur_token.reg = prev_token.reg = NULL;
- cur_token.str = prev_token.str = NULL;
-
- /* Initialize parser structure. */
- intel_parser.got_a_float = got_a_float;
- intel_parser.op_modifier = 0;
- intel_parser.is_mem = 0;
- intel_parser.in_offset = 0;
- intel_parser.in_bracket = 0;
- intel_parser.reg = NULL;
- intel_parser.disp[0] = '\0';
- intel_parser.next_operand = NULL;
-
- i.base_reg = NULL;
- i.index_reg = NULL;
-
- /* Read the first token and start the parser. */
- intel_get_token ();
- ret = intel_expr ();
-
- if (!ret)
- break;
-
- if (cur_token.code != T_NIL)
- {
- as_bad (_("invalid operand for '%s' ('%s' unexpected)"),
- current_templates->start->name, cur_token.str);
- ret = 0;
- }
- /* If we found a memory reference, hand it over to i386_displacement
- to fill in the rest of the operand fields. */
- else if (intel_parser.is_mem)
- {
- if ((i.mem_operands == 1
- && !current_templates->start->opcode_modifier.isstring)
- || i.mem_operands == 2)
- {
- as_bad (_("too many memory references for '%s'"),
- current_templates->start->name);
- ret = 0;
- }
- else
- {
- char *s = intel_parser.disp;
-
- if (!quiet_warnings && intel_parser.is_mem < 0)
- /* See the comments in intel_bracket_expr. */
- as_warn (_("Treating `%s' as memory reference"), operand_string);
-
- /* Add the displacement expression. */
- if (*s != '\0')
- ret = i386_displacement (s, s + strlen (s));
- if (ret)
- {
- /* Swap base and index in 16-bit memory operands like
- [si+bx]. Since i386_index_check is also used in AT&T
- mode we have to do that here. */
- if (i.base_reg
- && i.index_reg
- && i.base_reg->reg_type.bitfield.reg16
- && i.index_reg->reg_type.bitfield.reg16
- && i.base_reg->reg_num >= 6
- && i.index_reg->reg_num < 6)
- {
- const reg_entry *base = i.index_reg;
-
- i.index_reg = i.base_reg;
- i.base_reg = base;
- }
- ret = i386_index_check (operand_string);
- }
- if (ret)
- {
- i.types[this_operand].bitfield.mem = 1;
- i.mem_operands++;
- }
- }
- }
-
- /* Constant and OFFSET expressions are handled by i386_immediate. */
- else if ((intel_parser.op_modifier & (1 << T_OFFSET))
- || intel_parser.reg == NULL)
- {
- if (i.mem_operands < 2 && i.seg[i.mem_operands])
- {
- if (!(intel_parser.op_modifier & (1 << T_OFFSET)))
- as_warn (_("Segment override ignored"));
- i.seg[i.mem_operands] = NULL;
- }
- ret = i386_immediate (intel_parser.disp);
- }
-
- if (!final_base && !final_index)
- {
- final_base = i.base_reg;
- final_index = i.index_reg;
- }
-
- if (intel_parser.next_operand && this_operand >= MAX_OPERANDS - 1)
- ret = 0;
- if (!ret || !intel_parser.next_operand)
- break;
- intel_parser.op_string = intel_parser.next_operand;
- this_operand = i.operands++;
- i.types[this_operand].bitfield.unspecified = 1;
- }
-
- free (p);
- free (intel_parser.disp);
-
- if (final_base || final_index)
- {
- i.base_reg = final_base;
- i.index_reg = final_index;
- }
-
- return ret;
-}
-
-#define NUM_ADDRESS_REGS (!!i.base_reg + !!i.index_reg)
-
-/* expr e04 expr'
-
- expr' cmpOp e04 expr'
- | Empty */
-static int
-intel_expr (void)
-{
- /* XXX Implement the comparison operators. */
- return intel_e04 ();
-}
-
-/* e04 e05 e04'
-
- e04' addOp e05 e04'
- | Empty */
-static int
-intel_e04 (void)
-{
- int nregs = -1;
-
- for (;;)
- {
- if (!intel_e05())
- return 0;
-
- if (nregs >= 0 && NUM_ADDRESS_REGS > nregs)
- i.base_reg = i386_regtab + REGNAM_AL; /* al is invalid as base */
-
- if (cur_token.code == '+')
- nregs = -1;
- else if (cur_token.code == '-')
- nregs = NUM_ADDRESS_REGS;
- else
- return 1;
-
- strcat (intel_parser.disp, cur_token.str);
- intel_match_token (cur_token.code);
- }
-}
-
-/* e05 e06 e05'
-
- e05' binOp e06 e05'
- | Empty */
-static int
-intel_e05 (void)
-{
- int nregs = ~NUM_ADDRESS_REGS;
-
- for (;;)
- {
- if (!intel_e06())
- return 0;
-
- if (cur_token.code == '&'
- || cur_token.code == '|'
- || cur_token.code == '^')
- {
- char str[2];
-
- str[0] = cur_token.code;
- str[1] = 0;
- strcat (intel_parser.disp, str);
- }
- else
- break;
-
- intel_match_token (cur_token.code);
-
- if (nregs < 0)
- nregs = ~nregs;
- }
- if (nregs >= 0 && NUM_ADDRESS_REGS > nregs)
- i.base_reg = i386_regtab + REGNAM_AL + 1; /* cl is invalid as base */
- return 1;
-}
-
-/* e06 e09 e06'
-
- e06' mulOp e09 e06'
- | Empty */
-static int
-intel_e06 (void)
-{
- int nregs = ~NUM_ADDRESS_REGS;
-
- for (;;)
- {
- if (!intel_e09())
- return 0;
-
- if (cur_token.code == '*'
- || cur_token.code == '/'
- || cur_token.code == '%')
- {
- char str[2];
-
- str[0] = cur_token.code;
- str[1] = 0;
- strcat (intel_parser.disp, str);
- }
- else if (cur_token.code == T_SHL)
- strcat (intel_parser.disp, "<<");
- else if (cur_token.code == T_SHR)
- strcat (intel_parser.disp, ">>");
- else
- break;
-
- intel_match_token (cur_token.code);
-
- if (nregs < 0)
- nregs = ~nregs;
- }
- if (nregs >= 0 && NUM_ADDRESS_REGS > nregs)
- i.base_reg = i386_regtab + REGNAM_AL + 2; /* dl is invalid as base */
- return 1;
-}
-
-/* e09 OFFSET e09
- | SHORT e09
- | + e09
- | - e09
- | ~ e09
- | NOT e09
- | e10 e09'
-
- e09' PTR e10 e09'
- | : e10 e09'
- | Empty */
-static int
-intel_e09 (void)
-{
- int nregs = ~NUM_ADDRESS_REGS;
- int in_offset = 0;
-
- for (;;)
- {
- /* Don't consume constants here. */
- if (cur_token.code == '+' || cur_token.code == '-')
- {
- /* Need to look one token ahead - if the next token
- is a constant, the current token is its sign. */
- int next_code;
-
- intel_match_token (cur_token.code);
- next_code = cur_token.code;
- intel_putback_token ();
- if (next_code == T_CONST)
- break;
- }
-
- /* e09 OFFSET e09 */
- if (cur_token.code == T_OFFSET)
- {
- if (!in_offset++)
- ++intel_parser.in_offset;
- }
-
- /* e09 SHORT e09 */
- else if (cur_token.code == T_SHORT)
- intel_parser.op_modifier |= 1 << T_SHORT;
-
- /* e09 + e09 */
- else if (cur_token.code == '+')
- strcat (intel_parser.disp, "+");
-
- /* e09 - e09
- | ~ e09
- | NOT e09 */
- else if (cur_token.code == '-' || cur_token.code == '~')
- {
- char str[2];
-
- if (nregs < 0)
- nregs = ~nregs;
- str[0] = cur_token.code;
- str[1] = 0;
- strcat (intel_parser.disp, str);
- }
-
- /* e09 e10 e09' */
- else
- break;
-
- intel_match_token (cur_token.code);
- }
-
- for (;;)
- {
- if (!intel_e10 ())
- return 0;
-
- /* e09' PTR e10 e09' */
- if (cur_token.code == T_PTR)
- {
- char suffix;
-
- if (prev_token.code == T_BYTE)
- {
- suffix = BYTE_MNEM_SUFFIX;
- i.types[this_operand].bitfield.byte = 1;
- }
-
- else if (prev_token.code == T_WORD)
- {
- if ((current_templates->start->name[0] == 'l'
- && current_templates->start->name[2] == 's'
- && current_templates->start->name[3] == 0)
- || current_templates->start->base_opcode == 0x62 /* bound */)
- suffix = BYTE_MNEM_SUFFIX; /* so it will cause an error */
- else if (intel_parser.got_a_float == 2) /* "fi..." */
- suffix = SHORT_MNEM_SUFFIX;
- else
- suffix = WORD_MNEM_SUFFIX;
- i.types[this_operand].bitfield.word = 1;
- }
-
- else if (prev_token.code == T_DWORD)
- {
- if ((current_templates->start->name[0] == 'l'
- && current_templates->start->name[2] == 's'
- && current_templates->start->name[3] == 0)
- || current_templates->start->base_opcode == 0x62 /* bound */)
- suffix = WORD_MNEM_SUFFIX;
- else if (flag_code == CODE_16BIT
- && (current_templates->start->opcode_modifier.jump
- || current_templates->start->opcode_modifier.jumpdword))
- suffix = LONG_DOUBLE_MNEM_SUFFIX;
- else if (intel_parser.got_a_float == 1) /* "f..." */
- suffix = SHORT_MNEM_SUFFIX;
- else
- suffix = LONG_MNEM_SUFFIX;
- i.types[this_operand].bitfield.dword = 1;
- }
-
- else if (prev_token.code == T_FWORD)
- {
- if (current_templates->start->name[0] == 'l'
- && current_templates->start->name[2] == 's'
- && current_templates->start->name[3] == 0)
- suffix = LONG_MNEM_SUFFIX;
- else if (!intel_parser.got_a_float)
- {
- if (flag_code == CODE_16BIT)
- add_prefix (DATA_PREFIX_OPCODE);
- suffix = LONG_DOUBLE_MNEM_SUFFIX;
- }
- else
- suffix = BYTE_MNEM_SUFFIX; /* so it will cause an error */
- i.types[this_operand].bitfield.fword = 1;
- }
-
- else if (prev_token.code == T_QWORD)
- {
- if (current_templates->start->base_opcode == 0x62 /* bound */
- || intel_parser.got_a_float == 1) /* "f..." */
- suffix = LONG_MNEM_SUFFIX;
- else
- suffix = QWORD_MNEM_SUFFIX;
- i.types[this_operand].bitfield.qword = 1;
- }
-
- else if (prev_token.code == T_TBYTE)
- {
- if (intel_parser.got_a_float == 1)
- suffix = LONG_DOUBLE_MNEM_SUFFIX;
- else
- suffix = BYTE_MNEM_SUFFIX; /* so it will cause an error */
- }
-
- else if (prev_token.code == T_XMMWORD)
- {
- suffix = XMMWORD_MNEM_SUFFIX;
- i.types[this_operand].bitfield.xmmword = 1;
- }
-
- else if (prev_token.code == T_YMMWORD)
- {
- suffix = YMMWORD_MNEM_SUFFIX;
- i.types[this_operand].bitfield.ymmword = 1;
- }
-
- else
- {
- as_bad (_("Unknown operand modifier `%s'"), prev_token.str);
- return 0;
- }
-
- i.types[this_operand].bitfield.unspecified = 0;
-
- /* Operands for jump/call using 'ptr' notation denote absolute
- addresses. */
- if (current_templates->start->opcode_modifier.jump
- || current_templates->start->opcode_modifier.jumpdword)
- i.types[this_operand].bitfield.jumpabsolute = 1;
-
- if (current_templates->start->base_opcode == 0x8d /* lea */)
- ;
- else if (!i.suffix)
- i.suffix = suffix;
- else if (i.suffix != suffix)
- {
- as_bad (_("Conflicting operand modifiers"));
- return 0;
- }
-
- }
-
- /* e09' : e10 e09' */
- else if (cur_token.code == ':')
- {
- if (prev_token.code != T_REG)
- {
- /* While {call,jmp} SSSS:OOOO is MASM syntax only when SSSS is a
- segment/group identifier (which we don't have), using comma
- as the operand separator there is even less consistent, since
- there all branches only have a single operand. */
- if (this_operand != 0
- || intel_parser.in_offset
- || intel_parser.in_bracket
- || (!current_templates->start->opcode_modifier.jump
- && !current_templates->start->opcode_modifier.jumpdword
- && !current_templates->start->opcode_modifier.jumpintersegment
- && !current_templates->start->operand_types[0].bitfield.jumpabsolute))
- return intel_match_token (T_NIL);
- /* Remember the start of the 2nd operand and terminate 1st
- operand here.
- XXX This isn't right, yet (when SSSS:OOOO is right operand of
- another expression), but it gets at least the simplest case
- (a plain number or symbol on the left side) right. */
- intel_parser.next_operand = intel_parser.op_string;
- *--intel_parser.op_string = '\0';
- return intel_match_token (':');
- }
- }
-
- /* e09' Empty */
- else
- break;
-
- intel_match_token (cur_token.code);
-
- }
-
- if (in_offset)
- {
- --intel_parser.in_offset;
- if (nregs < 0)
- nregs = ~nregs;
- if (NUM_ADDRESS_REGS > nregs)
- {
- as_bad (_("Invalid operand to `OFFSET'"));
- return 0;
- }
- intel_parser.op_modifier |= 1 << T_OFFSET;
- }
-
- if (nregs >= 0 && NUM_ADDRESS_REGS > nregs)
- i.base_reg = i386_regtab + REGNAM_AL + 3; /* bl is invalid as base */
- return 1;
-}
-
-static int
-intel_bracket_expr (void)
-{
- int was_offset = intel_parser.op_modifier & (1 << T_OFFSET);
- const char *start = intel_parser.op_string;
- int len;
-
- if (i.op[this_operand].regs)
- return intel_match_token (T_NIL);
-
- intel_match_token ('[');
-
- /* Mark as a memory operand only if it's not already known to be an
- offset expression. If it's an offset expression, we need to keep
- the brace in. */
- if (!intel_parser.in_offset)
- {
- ++intel_parser.in_bracket;
-
- /* Operands for jump/call inside brackets denote absolute addresses. */
- if (current_templates->start->opcode_modifier.jump
- || current_templates->start->opcode_modifier.jumpdword)
- i.types[this_operand].bitfield.jumpabsolute = 1;
-
- /* Unfortunately gas always diverged from MASM in a respect that can't
- be easily fixed without risking to break code sequences likely to be
- encountered (the testsuite even check for this): MASM doesn't consider
- an expression inside brackets unconditionally as a memory reference.
- When that is e.g. a constant, an offset expression, or the sum of the
- two, this is still taken as a constant load. gas, however, always
- treated these as memory references. As a compromise, we'll try to make
- offset expressions inside brackets work the MASM way (since that's
- less likely to be found in real world code), but make constants alone
- continue to work the traditional gas way. In either case, issue a
- warning. */
- intel_parser.op_modifier &= ~was_offset;
- }
- else
- strcat (intel_parser.disp, "[");
-
- /* Add a '+' to the displacement string if necessary. */
- if (*intel_parser.disp != '\0'
- && *(intel_parser.disp + strlen (intel_parser.disp) - 1) != '+')
- strcat (intel_parser.disp, "+");
-
- if (intel_expr ()
- && (len = intel_parser.op_string - start - 1,
- intel_match_token (']')))
- {
- /* Preserve brackets when the operand is an offset expression. */
- if (intel_parser.in_offset)
- strcat (intel_parser.disp, "]");
- else
- {
- --intel_parser.in_bracket;
- if (i.base_reg || i.index_reg)
- intel_parser.is_mem = 1;
- if (!intel_parser.is_mem)
- {
- if (!(intel_parser.op_modifier & (1 << T_OFFSET)))
- /* Defer the warning until all of the operand was parsed. */
- intel_parser.is_mem = -1;
- else if (!quiet_warnings)
- as_warn (_("`[%.*s]' taken to mean just `%.*s'"),
- len, start, len, start);
- }
- }
- intel_parser.op_modifier |= was_offset;
-
- return 1;
- }
- return 0;
-}
-
-/* e10 e11 e10'
-
- e10' [ expr ] e10'
- | Empty */
-static int
-intel_e10 (void)
-{
- if (!intel_e11 ())
- return 0;
-
- while (cur_token.code == '[')
- {
- if (!intel_bracket_expr ())
- return 0;
- }
-
- return 1;
-}
-
-/* e11 ( expr )
- | [ expr ]
- | BYTE
- | WORD
- | DWORD
- | FWORD
- | QWORD
- | TBYTE
- | OWORD
- | XMMWORD
- | YMMWORD
- | $
- | .
- | register
- | id
- | constant */
-static int
-intel_e11 (void)
-{
- switch (cur_token.code)
- {
- /* e11 ( expr ) */
- case '(':
- intel_match_token ('(');
- strcat (intel_parser.disp, "(");
-
- if (intel_expr () && intel_match_token (')'))
- {
- strcat (intel_parser.disp, ")");
- return 1;
- }
- return 0;
-
- /* e11 [ expr ] */
- case '[':
- return intel_bracket_expr ();
-
- /* e11 $
- | . */
- case '.':
- strcat (intel_parser.disp, cur_token.str);
- intel_match_token (cur_token.code);
-
- /* Mark as a memory operand only if it's not already known to be an
- offset expression. */
- if (!intel_parser.in_offset)
- intel_parser.is_mem = 1;
-
- return 1;
-
- /* e11 register */
- case T_REG:
- {
- const reg_entry *reg = intel_parser.reg = cur_token.reg;
-
- intel_match_token (T_REG);
-
- /* Check for segment change. */
- if (cur_token.code == ':')
- {
- if (!reg->reg_type.bitfield.sreg2
- && !reg->reg_type.bitfield.sreg3)
- {
- as_bad (_("`%s' is not a valid segment register"),
- reg->reg_name);
- return 0;
- }
- else if (i.mem_operands >= 2)
- as_warn (_("Segment override ignored"));
- else if (i.seg[i.mem_operands])
- as_warn (_("Extra segment override ignored"));
- else
- {
- if (!intel_parser.in_offset)
- intel_parser.is_mem = 1;
- switch (reg->reg_num)
- {
- case 0:
- i.seg[i.mem_operands] = &es;
- break;
- case 1:
- i.seg[i.mem_operands] = &cs;
- break;
- case 2:
- i.seg[i.mem_operands] = &ss;
- break;
- case 3:
- i.seg[i.mem_operands] = &ds;
- break;
- case 4:
- i.seg[i.mem_operands] = &fs;
- break;
- case 5:
- i.seg[i.mem_operands] = &gs;
- break;
- }
- }
- }
-
- else if (reg->reg_type.bitfield.sreg3 && reg->reg_num == RegFlat)
- {
- as_bad (_("cannot use `FLAT' here"));
- return 0;
- }
-
- /* Not a segment register. Check for register scaling. */
- else if (cur_token.code == '*')
- {
- if (!intel_parser.in_bracket)
- {
- as_bad (_("Register scaling only allowed in memory operands"));
- return 0;
- }
-
- if (reg->reg_type.bitfield.reg16) /* Disallow things like [si*1]. */
- reg = i386_regtab + REGNAM_AX + 4; /* sp is invalid as index */
- else if (i.index_reg)
- reg = i386_regtab + REGNAM_EAX + 4; /* esp is invalid as index */
-
- /* What follows must be a valid scale. */
- intel_match_token ('*');
- i.index_reg = reg;
- i.types[this_operand].bitfield.baseindex = 1;
-
- /* Set the scale after setting the register (otherwise,
- i386_scale will complain) */
- if (cur_token.code == '+' || cur_token.code == '-')
- {
- char *str, sign = cur_token.code;
- intel_match_token (cur_token.code);
- if (cur_token.code != T_CONST)
- {
- as_bad (_("Syntax error: Expecting a constant, got `%s'"),
- cur_token.str);
- return 0;
- }
- str = (char *) xmalloc (strlen (cur_token.str) + 2);
- strcpy (str + 1, cur_token.str);
- *str = sign;
- if (!i386_scale (str))
- return 0;
- free (str);
- }
- else if (!i386_scale (cur_token.str))
- return 0;
- intel_match_token (cur_token.code);
- }
-
- /* No scaling. If this is a memory operand, the register is either a
- base register (first occurrence) or an index register (second
- occurrence). */
- else if (intel_parser.in_bracket)
- {
-
- if (!i.base_reg)
- i.base_reg = reg;
- else if (!i.index_reg)
- i.index_reg = reg;
- else
- {
- as_bad (_("Too many register references in memory operand"));
- return 0;
- }
-
- i.types[this_operand].bitfield.baseindex = 1;
- }
-
- /* It's neither base nor index. */
- else if (!intel_parser.in_offset && !intel_parser.is_mem)
- {
- i386_operand_type temp = reg->reg_type;
- temp.bitfield.baseindex = 0;
- i.types[this_operand] = operand_type_or (i.types[this_operand],
- temp);
- i.types[this_operand].bitfield.unspecified = 0;
- i.op[this_operand].regs = reg;
- i.reg_operands++;
- }
- else
- {
- as_bad (_("Invalid use of register"));
- return 0;
- }
-
- /* Since registers are not part of the displacement string (except
- when we're parsing offset operands), we may need to remove any
- preceding '+' from the displacement string. */
- if (*intel_parser.disp != '\0'
- && !intel_parser.in_offset)
- {
- char *s = intel_parser.disp;
- s += strlen (s) - 1;
- if (*s == '+')
- *s = '\0';
- }
-
- return 1;
- }
-
- /* e11 BYTE
- | WORD
- | DWORD
- | FWORD
- | QWORD
- | TBYTE
- | OWORD
- | XMMWORD
- | YMMWORD */
- case T_BYTE:
- case T_WORD:
- case T_DWORD:
- case T_FWORD:
- case T_QWORD:
- case T_TBYTE:
- case T_XMMWORD:
- case T_YMMWORD:
- intel_match_token (cur_token.code);
-
- if (cur_token.code == T_PTR)
- return 1;
-
- /* It must have been an identifier. */
- intel_putback_token ();
- cur_token.code = T_ID;
- /* FALLTHRU */
-
- /* e11 id
- | constant */
- case T_ID:
- if (!intel_parser.in_offset && intel_parser.is_mem <= 0)
- {
- symbolS *symbolP;
-
- /* The identifier represents a memory reference only if it's not
- preceded by an offset modifier and if it's not an equate. */
- symbolP = symbol_find(cur_token.str);
- if (!symbolP || S_GET_SEGMENT(symbolP) != absolute_section)
- intel_parser.is_mem = 1;
- }
- /* FALLTHRU */
-
- case T_CONST:
- case '-':
- case '+':
- {
- char *save_str, sign = 0;
-
- /* Allow constants that start with `+' or `-'. */
- if (cur_token.code == '-' || cur_token.code == '+')
- {
- sign = cur_token.code;
- intel_match_token (cur_token.code);
- if (cur_token.code != T_CONST)
- {
- as_bad (_("Syntax error: Expecting a constant, got `%s'"),
- cur_token.str);
- return 0;
- }
- }
-
- save_str = (char *) xmalloc (strlen (cur_token.str) + 2);
- strcpy (save_str + !!sign, cur_token.str);
- if (sign)
- *save_str = sign;
-
- /* Get the next token to check for register scaling. */
- intel_match_token (cur_token.code);
-
- /* Check if this constant is a scaling factor for an
- index register. */
- if (cur_token.code == '*')
- {
- if (intel_match_token ('*') && cur_token.code == T_REG)
- {
- const reg_entry *reg = cur_token.reg;
-
- if (!intel_parser.in_bracket)
- {
- as_bad (_("Register scaling only allowed "
- "in memory operands"));
- return 0;
- }
-
- /* Disallow things like [1*si].
- sp and esp are invalid as index. */
- if (reg->reg_type.bitfield.reg16)
- reg = i386_regtab + REGNAM_AX + 4;
- else if (i.index_reg)
- reg = i386_regtab + REGNAM_EAX + 4;
-
- /* The constant is followed by `* reg', so it must be
- a valid scale. */
- i.index_reg = reg;
- i.types[this_operand].bitfield.baseindex = 1;
-
- /* Set the scale after setting the register (otherwise,
- i386_scale will complain) */
- if (!i386_scale (save_str))
- return 0;
- intel_match_token (T_REG);
-
- /* Since registers are not part of the displacement
- string, we may need to remove any preceding '+' from
- the displacement string. */
- if (*intel_parser.disp != '\0')
- {
- char *s = intel_parser.disp;
- s += strlen (s) - 1;
- if (*s == '+')
- *s = '\0';
- }
-
- free (save_str);
-
- return 1;
- }
-
- /* The constant was not used for register scaling. Since we have
- already consumed the token following `*' we now need to put it
- back in the stream. */
- intel_putback_token ();
- }
-
- /* Add the constant to the displacement string. */
- strcat (intel_parser.disp, save_str);
- free (save_str);
-
- return 1;
- }
- }
-
- as_bad (_("Unrecognized token '%s'"), cur_token.str);
- return 0;
-}
-
-/* Match the given token against cur_token. If they match, read the next
- token from the operand string. */
-static int
-intel_match_token (int code)
-{
- if (cur_token.code == code)
- {
- intel_get_token ();
- return 1;
- }
- else
- {
- as_bad (_("Unexpected token `%s'"), cur_token.str);
- return 0;
- }
-}
-
-/* Read a new token from intel_parser.op_string and store it in cur_token. */
-static void
-intel_get_token (void)
-{
- char *end_op;
- const reg_entry *reg;
- struct intel_token new_token;
-
- new_token.code = T_NIL;
- new_token.reg = NULL;
- new_token.str = NULL;
-
- /* Free the memory allocated to the previous token and move
- cur_token to prev_token. */
- if (prev_token.str)
- free (prev_token.str);
-
- prev_token = cur_token;
-
- /* Skip whitespace. */
- while (is_space_char (*intel_parser.op_string))
- intel_parser.op_string++;
-
- /* Return an empty token if we find nothing else on the line. */
- if (*intel_parser.op_string == '\0')
- {
- cur_token = new_token;
- return;
- }
-
- /* The new token cannot be larger than the remainder of the operand
- string. */
- new_token.str = (char *) xmalloc (strlen (intel_parser.op_string) + 1);
- new_token.str[0] = '\0';
-
- if (strchr ("0123456789", *intel_parser.op_string))
- {
- char *p = new_token.str;
- char *q = intel_parser.op_string;
- new_token.code = T_CONST;
-
- /* Allow any kind of identifier char to encompass floating point and
- hexadecimal numbers. */
- while (is_identifier_char (*q))
- *p++ = *q++;
- *p = '\0';
-
- /* Recognize special symbol names [0-9][bf]. */
- if (strlen (intel_parser.op_string) == 2
- && (intel_parser.op_string[1] == 'b'
- || intel_parser.op_string[1] == 'f'))
- new_token.code = T_ID;
- }
-
- else if ((reg = parse_register (intel_parser.op_string, &end_op)) != NULL)
- {
- size_t len = end_op - intel_parser.op_string;
-
- new_token.code = T_REG;
- new_token.reg = reg;
-
- memcpy (new_token.str, intel_parser.op_string, len);
- new_token.str[len] = '\0';
- }
-
- else if (is_identifier_char (*intel_parser.op_string))
- {
- char *p = new_token.str;
- char *q = intel_parser.op_string;
-
- /* A '.' or '$' followed by an identifier char is an identifier.
- Otherwise, it's operator '.' followed by an expression. */
- if ((*q == '.' || *q == '$') && !is_identifier_char (*(q + 1)))
- {
- new_token.code = '.';
- new_token.str[0] = '.';
- new_token.str[1] = '\0';
- }
- else
- {
- while (is_identifier_char (*q) || *q == '@')
- *p++ = *q++;
- *p = '\0';
-
- if (strcasecmp (new_token.str, "NOT") == 0)
- new_token.code = '~';
-
- else if (strcasecmp (new_token.str, "MOD") == 0)
- new_token.code = '%';
-
- else if (strcasecmp (new_token.str, "AND") == 0)
- new_token.code = '&';
-
- else if (strcasecmp (new_token.str, "OR") == 0)
- new_token.code = '|';
-
- else if (strcasecmp (new_token.str, "XOR") == 0)
- new_token.code = '^';
-
- else if (strcasecmp (new_token.str, "SHL") == 0)
- new_token.code = T_SHL;
-
- else if (strcasecmp (new_token.str, "SHR") == 0)
- new_token.code = T_SHR;
-
- else if (strcasecmp (new_token.str, "BYTE") == 0)
- new_token.code = T_BYTE;
-
- else if (strcasecmp (new_token.str, "WORD") == 0)
- new_token.code = T_WORD;
-
- else if (strcasecmp (new_token.str, "DWORD") == 0)
- new_token.code = T_DWORD;
-
- else if (strcasecmp (new_token.str, "FWORD") == 0)
- new_token.code = T_FWORD;
-
- else if (strcasecmp (new_token.str, "QWORD") == 0)
- new_token.code = T_QWORD;
-
- else if (strcasecmp (new_token.str, "TBYTE") == 0
- /* XXX remove (gcc still uses it) */
- || strcasecmp (new_token.str, "XWORD") == 0)
- new_token.code = T_TBYTE;
-
- else if (strcasecmp (new_token.str, "XMMWORD") == 0
- || strcasecmp (new_token.str, "OWORD") == 0)
- new_token.code = T_XMMWORD;
-
- else if (strcasecmp (new_token.str, "YMMWORD") == 0)
- new_token.code = T_YMMWORD;
-
- else if (strcasecmp (new_token.str, "PTR") == 0)
- new_token.code = T_PTR;
-
- else if (strcasecmp (new_token.str, "SHORT") == 0)
- new_token.code = T_SHORT;
-
- else if (strcasecmp (new_token.str, "OFFSET") == 0)
- {
- new_token.code = T_OFFSET;
-
- /* ??? This is not mentioned in the MASM grammar but gcc
- makes use of it with -mintel-syntax. OFFSET may be
- followed by FLAT: */
- if (strncasecmp (q, " FLAT:", 6) == 0)
- strcat (new_token.str, " FLAT:");
- }
-
- else
- new_token.code = T_ID;
- }
- }
-
- else if (strchr ("+-/*%|&^:[]()~", *intel_parser.op_string))
- {
- new_token.code = *intel_parser.op_string;
- new_token.str[0] = *intel_parser.op_string;
- new_token.str[1] = '\0';
- }
-
- else if (strchr ("<>", *intel_parser.op_string)
- && *intel_parser.op_string == *(intel_parser.op_string + 1))
- {
- new_token.code = *intel_parser.op_string == '<' ? T_SHL : T_SHR;
- new_token.str[0] = *intel_parser.op_string;
- new_token.str[1] = *intel_parser.op_string;
- new_token.str[2] = '\0';
- }
-
- else
- as_bad (_("Unrecognized token `%s'"), intel_parser.op_string);
-
- intel_parser.op_string += strlen (new_token.str);
- cur_token = new_token;
-}
-
-/* Put cur_token back into the token stream and make cur_token point to
- prev_token. */
-static void
-intel_putback_token (void)
-{
- if (cur_token.code != T_NIL)
- {
- intel_parser.op_string -= strlen (cur_token.str);
- free (cur_token.str);
- }
- cur_token = prev_token;
-
- /* Forget prev_token. */
- prev_token.code = T_NIL;
- prev_token.reg = NULL;
- prev_token.str = NULL;
-}
+#include "tc-i386-intel.c"
void
tc_x86_parse_to_dw2regnum (expressionS *exp)
input_line_pointer = sp[flag_code >> 1];
tc_x86_parse_to_dw2regnum (&exp);
- assert (exp.X_op == O_constant);
+ gas_assert (exp.X_op == O_constant);
sp_regno[flag_code >> 1] = exp.X_add_number;
input_line_pointer = saved_input;
}
projects / deliverable / binutils-gdb.git / blobdiff