/* tc-i386.c -- Assemble code for the Intel 80386
Copyright 1989, 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999,
- 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007
+ 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009
Free Software Foundation, Inc.
This file is part of GAS, the GNU Assembler.
#endif
#endif
+/* Prefixes will be emitted in the order defined below.
+ WAIT_PREFIX must be the first prefix since FWAIT is really is an
+ instruction, and so must come before any prefixes.
+ The preferred prefix order is SEG_PREFIX, ADDR_PREFIX, DATA_PREFIX,
+ LOCKREP_PREFIX. */
+#define WAIT_PREFIX 0
+#define SEG_PREFIX 1
+#define ADDR_PREFIX 2
+#define DATA_PREFIX 3
+#define LOCKREP_PREFIX 4
+#define REX_PREFIX 5 /* must come last. */
+#define MAX_PREFIXES 6 /* max prefixes per opcode */
+
+/* we define the syntax here (modulo base,index,scale syntax) */
+#define REGISTER_PREFIX '%'
+#define IMMEDIATE_PREFIX '$'
+#define ABSOLUTE_PREFIX '*'
+
+/* these are the instruction mnemonic suffixes in AT&T syntax or
+ memory operand size in Intel syntax. */
+#define WORD_MNEM_SUFFIX 'w'
+#define BYTE_MNEM_SUFFIX 'b'
+#define SHORT_MNEM_SUFFIX 's'
+#define LONG_MNEM_SUFFIX 'l'
+#define QWORD_MNEM_SUFFIX 'q'
+#define XMMWORD_MNEM_SUFFIX 'x'
+#define YMMWORD_MNEM_SUFFIX 'y'
+/* Intel Syntax. Use a non-ascii letter since since it never appears
+ in instructions. */
+#define LONG_DOUBLE_MNEM_SUFFIX '\1'
+
+#define END_OF_INSN '\0'
+
+/*
+ 'templates' is for grouping together 'template' structures for opcodes
+ of the same name. This is only used for storing the insns in the grand
+ ole hash table of insns.
+ The templates themselves start at START and range up to (but not including)
+ END.
+ */
+typedef struct
+{
+ const template *start;
+ const template *end;
+}
+templates;
+
+/* 386 operand encoding bytes: see 386 book for details of this. */
+typedef struct
+{
+ unsigned int regmem; /* codes register or memory operand */
+ unsigned int reg; /* codes register operand (or extended opcode) */
+ unsigned int mode; /* how to interpret regmem & reg */
+}
+modrm_byte;
+
+/* x86-64 extension prefix. */
+typedef int rex_byte;
+
+/* 386 opcode byte to code indirect addressing. */
+typedef struct
+{
+ unsigned base;
+ unsigned index;
+ unsigned scale;
+}
+sib_byte;
+
+/* x86 arch names, types and features */
+typedef struct
+{
+ const char *name; /* arch name */
+ enum processor_type type; /* arch type */
+ i386_cpu_flags flags; /* cpu feature flags */
+}
+arch_entry;
+
static void set_code_flag (int);
static void set_16bit_gcc_code_flag (int);
static void set_intel_syntax (int);
+static void set_intel_mnemonic (int);
static void set_allow_index_reg (int);
+static void set_sse_check (int);
static void set_cpu_arch (int);
#ifdef TE_PE
static void pe_directive_secrel (int);
#endif
static void signed_cons (int);
static char *output_invalid (int c);
-static int i386_operand (char *);
+static int i386_finalize_immediate (segT, expressionS *, i386_operand_type,
+ const char *);
+static int i386_finalize_displacement (segT, expressionS *, i386_operand_type,
+ const char *);
+static int i386_att_operand (char *);
static int i386_intel_operand (char *, int);
+static int i386_intel_simplify (expressionS *);
+static int i386_intel_parse_name (const char *, expressionS *);
static const reg_entry *parse_register (char *, char **);
static char *parse_insn (char *, char *);
static char *parse_operands (char *, const char *);
static void swap_2_operands (int, int);
static void optimize_imm (void);
static void optimize_disp (void);
-static int match_template (void);
+static const template *match_template (void);
static int check_string (void);
static int process_suffix (void);
static int check_byte_reg (void);
static int check_qword_reg (void);
static int check_word_reg (void);
static int finalize_imm (void);
-static void process_drex (void);
static int process_operands (void);
static const seg_entry *build_modrm_byte (void);
static void output_insn (void);
static const char *default_arch = DEFAULT_ARCH;
+/* VEX prefix. */
+typedef struct
+{
+ /* VEX prefix is either 2 byte or 3 byte. */
+ unsigned char bytes[3];
+ unsigned int length;
+ /* Destination or source register specifier. */
+ const reg_entry *register_specifier;
+} vex_prefix;
+
/* 'md_assemble ()' gathers together information and puts it into a
i386_insn. */
/* TM holds the template for the insn were currently assembling. */
template tm;
- /* SUFFIX holds the instruction mnemonic suffix if given.
- (e.g. 'l' for 'movl') */
+ /* SUFFIX holds the instruction size suffix for byte, word, dword
+ or qword, if given. */
char suffix;
/* OPERANDS gives the number of given operands. */
unsigned char prefix[MAX_PREFIXES];
/* RM and SIB are the modrm byte and the sib byte where the
- addressing modes of this insn are encoded. DREX is the byte
- added by the SSE5 instructions. */
-
+ addressing modes of this insn are encoded. */
modrm_byte rm;
rex_byte rex;
sib_byte sib;
- drex_byte drex;
+ vex_prefix vex;
+
+ /* Swap operand in encoding. */
+ unsigned int swap_operand : 1;
};
typedef struct _i386_insn i386_insn;
static expressionS im_expressions[MAX_IMMEDIATE_OPERANDS];
/* Current operand we are working on. */
-static int this_operand;
+static int this_operand = -1;
/* We support four different modes. FLAG_CODE variable is used to distinguish
these. */
CODE_32BIT,
CODE_16BIT,
CODE_64BIT };
-#define NUM_FLAG_CODE ((int) CODE_64BIT + 1)
static enum flag_code flag_code;
static unsigned int object_64bit;
0 if att syntax. */
static int intel_syntax = 0;
+/* 1 for intel mnemonic,
+ 0 if att mnemonic. */
+static int intel_mnemonic = !SYSV386_COMPAT;
+
+/* 1 if support old (<= 2.8.1) versions of gcc. */
+static int old_gcc = OLDGCC_COMPAT;
+
+/* 1 if pseudo registers are permitted. */
+static int allow_pseudo_reg = 0;
+
/* 1 if register prefix % not required. */
static int allow_naked_reg = 0;
-/* 1 if fake index register, eiz/riz, is allowed . */
+/* 1 if pseudo index register, eiz/riz, is allowed . */
static int allow_index_reg = 0;
+static enum
+ {
+ sse_check_none = 0,
+ sse_check_warning,
+ sse_check_error
+ }
+sse_check;
+
/* Register prefix used for error message. */
static const char *register_prefix = "%";
/* CPU name. */
static const char *cpu_arch_name = NULL;
-static const char *cpu_sub_arch_name = NULL;
+static char *cpu_sub_arch_name = NULL;
/* CPU feature flags. */
static i386_cpu_flags cpu_arch_flags = CPU_UNKNOWN_FLAGS;
-/* Bitwise NOT of cpu_arch_flags. */
-static i386_cpu_flags cpu_arch_flags_not;
-
/* If we have selected a cpu we are generating instructions for. */
static int cpu_arch_tune_set = 0;
/* Cpu we are generating instructions for. */
-static enum processor_type cpu_arch_tune = PROCESSOR_UNKNOWN;
+enum processor_type cpu_arch_tune = PROCESSOR_UNKNOWN;
/* CPU feature flags of cpu we are generating instructions for. */
static i386_cpu_flags cpu_arch_tune_flags;
/* CPU instruction set architecture used. */
-static enum processor_type cpu_arch_isa = PROCESSOR_UNKNOWN;
+enum processor_type cpu_arch_isa = PROCESSOR_UNKNOWN;
/* CPU feature flags of instruction set architecture used. */
-static i386_cpu_flags cpu_arch_isa_flags;
+i386_cpu_flags cpu_arch_isa_flags;
/* If set, conditional jumps are not automatically promoted to handle
larger than a byte offset. */
static unsigned int no_cond_jump_promotion = 0;
+/* Encode SSE instructions with VEX prefix. */
+static unsigned int sse2avx;
+
/* Pre-defined "_GLOBAL_OFFSET_TABLE_". */
static symbolS *GOT_symbol;
static const arch_entry cpu_arch[] =
{
- {"generic32", PROCESSOR_GENERIC32,
- CPU_GENERIC32_FLAGS },
- {"generic64", PROCESSOR_GENERIC64,
- CPU_GENERIC64_FLAGS },
- {"i8086", PROCESSOR_UNKNOWN,
- CPU_NONE_FLAGS },
- {"i186", PROCESSOR_UNKNOWN,
- CPU_I186_FLAGS },
- {"i286", PROCESSOR_UNKNOWN,
- CPU_I286_FLAGS },
- {"i386", PROCESSOR_I386,
- CPU_I386_FLAGS },
- {"i486", PROCESSOR_I486,
- CPU_I486_FLAGS },
- {"i586", PROCESSOR_PENTIUM,
- CPU_I586_FLAGS },
- {"i686", PROCESSOR_PENTIUMPRO,
- CPU_I686_FLAGS },
- {"pentium", PROCESSOR_PENTIUM,
- CPU_I586_FLAGS },
- {"pentiumpro",PROCESSOR_PENTIUMPRO,
- CPU_I686_FLAGS },
- {"pentiumii", PROCESSOR_PENTIUMPRO,
- CPU_P2_FLAGS },
- {"pentiumiii",PROCESSOR_PENTIUMPRO,
- CPU_P3_FLAGS },
- {"pentium4", PROCESSOR_PENTIUM4,
- CPU_P4_FLAGS },
- {"prescott", PROCESSOR_NOCONA,
- CPU_CORE_FLAGS },
- {"nocona", PROCESSOR_NOCONA,
- CPU_NOCONA_FLAGS },
- {"yonah", PROCESSOR_CORE,
- CPU_CORE_FLAGS },
- {"core", PROCESSOR_CORE,
- CPU_CORE_FLAGS },
- {"merom", PROCESSOR_CORE2,
- CPU_CORE2_FLAGS },
- {"core2", PROCESSOR_CORE2,
- CPU_CORE2_FLAGS },
- {"k6", PROCESSOR_K6,
- CPU_K6_FLAGS },
- {"k6_2", PROCESSOR_K6,
- CPU_K6_2_FLAGS },
- {"athlon", PROCESSOR_ATHLON,
- CPU_ATHLON_FLAGS },
- {"sledgehammer", PROCESSOR_K8,
- CPU_K8_FLAGS },
- {"opteron", PROCESSOR_K8,
- CPU_K8_FLAGS },
- {"k8", PROCESSOR_K8,
- CPU_K8_FLAGS },
- {"amdfam10", PROCESSOR_AMDFAM10,
- CPU_AMDFAM10_FLAGS },
- {".mmx", PROCESSOR_UNKNOWN,
- CPU_MMX_FLAGS },
- {".sse", PROCESSOR_UNKNOWN,
- CPU_SSE_FLAGS },
- {".sse2", PROCESSOR_UNKNOWN,
- CPU_SSE2_FLAGS },
- {".sse3", PROCESSOR_UNKNOWN,
- CPU_SSE3_FLAGS },
- {".ssse3", PROCESSOR_UNKNOWN,
- CPU_SSSE3_FLAGS },
- {".sse4.1", PROCESSOR_UNKNOWN,
- CPU_SSE4_1_FLAGS },
- {".sse4.2", PROCESSOR_UNKNOWN,
- CPU_SSE4_2_FLAGS },
- {".sse4", PROCESSOR_UNKNOWN,
- CPU_SSE4_2_FLAGS },
- {".3dnow", PROCESSOR_UNKNOWN,
- CPU_3DNOW_FLAGS },
- {".3dnowa", PROCESSOR_UNKNOWN,
- CPU_3DNOWA_FLAGS },
- {".padlock", PROCESSOR_UNKNOWN,
- CPU_PADLOCK_FLAGS },
- {".pacifica", PROCESSOR_UNKNOWN,
- CPU_SVME_FLAGS },
- {".svme", PROCESSOR_UNKNOWN,
- CPU_SVME_FLAGS },
- {".sse4a", PROCESSOR_UNKNOWN,
- CPU_SSE4A_FLAGS },
- {".abm", PROCESSOR_UNKNOWN,
- CPU_ABM_FLAGS },
- {".sse5", PROCESSOR_UNKNOWN,
- CPU_SSE5_FLAGS },
+ { "generic32", PROCESSOR_GENERIC32,
+ CPU_GENERIC32_FLAGS },
+ { "generic64", PROCESSOR_GENERIC64,
+ CPU_GENERIC64_FLAGS },
+ { "i8086", PROCESSOR_UNKNOWN,
+ CPU_NONE_FLAGS },
+ { "i186", PROCESSOR_UNKNOWN,
+ CPU_I186_FLAGS },
+ { "i286", PROCESSOR_UNKNOWN,
+ CPU_I286_FLAGS },
+ { "i386", PROCESSOR_I386,
+ CPU_I386_FLAGS },
+ { "i486", PROCESSOR_I486,
+ CPU_I486_FLAGS },
+ { "i586", PROCESSOR_PENTIUM,
+ CPU_I586_FLAGS },
+ { "i686", PROCESSOR_PENTIUMPRO,
+ CPU_I686_FLAGS },
+ { "pentium", PROCESSOR_PENTIUM,
+ CPU_I586_FLAGS },
+ { "pentiumpro", PROCESSOR_PENTIUMPRO,
+ CPU_I686_FLAGS },
+ { "pentiumii", PROCESSOR_PENTIUMPRO,
+ CPU_P2_FLAGS },
+ { "pentiumiii",PROCESSOR_PENTIUMPRO,
+ CPU_P3_FLAGS },
+ { "pentium4", PROCESSOR_PENTIUM4,
+ CPU_P4_FLAGS },
+ { "prescott", PROCESSOR_NOCONA,
+ CPU_CORE_FLAGS },
+ { "nocona", PROCESSOR_NOCONA,
+ CPU_NOCONA_FLAGS },
+ { "yonah", PROCESSOR_CORE,
+ CPU_CORE_FLAGS },
+ { "core", PROCESSOR_CORE,
+ CPU_CORE_FLAGS },
+ { "merom", PROCESSOR_CORE2,
+ CPU_CORE2_FLAGS },
+ { "core2", PROCESSOR_CORE2,
+ CPU_CORE2_FLAGS },
+ { "corei7", PROCESSOR_COREI7,
+ CPU_COREI7_FLAGS },
+ { "k6", PROCESSOR_K6,
+ CPU_K6_FLAGS },
+ { "k6_2", PROCESSOR_K6,
+ CPU_K6_2_FLAGS },
+ { "athlon", PROCESSOR_ATHLON,
+ CPU_ATHLON_FLAGS },
+ { "sledgehammer", PROCESSOR_K8,
+ CPU_K8_FLAGS },
+ { "opteron", PROCESSOR_K8,
+ CPU_K8_FLAGS },
+ { "k8", PROCESSOR_K8,
+ CPU_K8_FLAGS },
+ { "amdfam10", PROCESSOR_AMDFAM10,
+ CPU_AMDFAM10_FLAGS },
+ { ".mmx", PROCESSOR_UNKNOWN,
+ CPU_MMX_FLAGS },
+ { ".sse", PROCESSOR_UNKNOWN,
+ CPU_SSE_FLAGS },
+ { ".sse2", PROCESSOR_UNKNOWN,
+ CPU_SSE2_FLAGS },
+ { ".sse3", PROCESSOR_UNKNOWN,
+ CPU_SSE3_FLAGS },
+ { ".ssse3", PROCESSOR_UNKNOWN,
+ CPU_SSSE3_FLAGS },
+ { ".sse4.1", PROCESSOR_UNKNOWN,
+ CPU_SSE4_1_FLAGS },
+ { ".sse4.2", PROCESSOR_UNKNOWN,
+ CPU_SSE4_2_FLAGS },
+ { ".sse4", PROCESSOR_UNKNOWN,
+ CPU_SSE4_2_FLAGS },
+ { ".avx", PROCESSOR_UNKNOWN,
+ CPU_AVX_FLAGS },
+ { ".vmx", PROCESSOR_UNKNOWN,
+ CPU_VMX_FLAGS },
+ { ".smx", PROCESSOR_UNKNOWN,
+ CPU_SMX_FLAGS },
+ { ".xsave", PROCESSOR_UNKNOWN,
+ CPU_XSAVE_FLAGS },
+ { ".aes", PROCESSOR_UNKNOWN,
+ CPU_AES_FLAGS },
+ { ".pclmul", PROCESSOR_UNKNOWN,
+ CPU_PCLMUL_FLAGS },
+ { ".clmul", PROCESSOR_UNKNOWN,
+ CPU_PCLMUL_FLAGS },
+ { ".fma", PROCESSOR_UNKNOWN,
+ CPU_FMA_FLAGS },
+ { ".fma4", PROCESSOR_UNKNOWN,
+ CPU_FMA4_FLAGS },
+ { ".movbe", PROCESSOR_UNKNOWN,
+ CPU_MOVBE_FLAGS },
+ { ".ept", PROCESSOR_UNKNOWN,
+ CPU_EPT_FLAGS },
+ { ".clflush", PROCESSOR_UNKNOWN,
+ CPU_CLFLUSH_FLAGS },
+ { ".syscall", PROCESSOR_UNKNOWN,
+ CPU_SYSCALL_FLAGS },
+ { ".rdtscp", PROCESSOR_UNKNOWN,
+ CPU_RDTSCP_FLAGS },
+ { ".3dnow", PROCESSOR_UNKNOWN,
+ CPU_3DNOW_FLAGS },
+ { ".3dnowa", PROCESSOR_UNKNOWN,
+ CPU_3DNOWA_FLAGS },
+ { ".padlock", PROCESSOR_UNKNOWN,
+ CPU_PADLOCK_FLAGS },
+ { ".pacifica", PROCESSOR_UNKNOWN,
+ CPU_SVME_FLAGS },
+ { ".svme", PROCESSOR_UNKNOWN,
+ CPU_SVME_FLAGS },
+ { ".sse4a", PROCESSOR_UNKNOWN,
+ CPU_SSE4A_FLAGS },
+ { ".abm", PROCESSOR_UNKNOWN,
+ CPU_ABM_FLAGS },
};
+#ifdef I386COFF
+/* Like s_lcomm_internal in gas/read.c but the alignment string
+ is allowed to be optional. */
+
+static symbolS *
+pe_lcomm_internal (int needs_align, symbolS *symbolP, addressT size)
+{
+ addressT align = 0;
+
+ SKIP_WHITESPACE ();
+
+ if (needs_align
+ && *input_line_pointer == ',')
+ {
+ align = parse_align (needs_align - 1);
+
+ if (align == (addressT) -1)
+ return NULL;
+ }
+ else
+ {
+ if (size >= 8)
+ align = 3;
+ else if (size >= 4)
+ align = 2;
+ else if (size >= 2)
+ align = 1;
+ else
+ align = 0;
+ }
+
+ bss_alloc (symbolP, size, align);
+ return symbolP;
+}
+
+static void
+pe_lcomm (int needs_align)
+{
+ s_comm_internal (needs_align * 2, pe_lcomm_internal);
+}
+#endif
+
const pseudo_typeS md_pseudo_table[] =
{
#if !defined(OBJ_AOUT) && !defined(USE_ALIGN_PTWO)
{"arch", set_cpu_arch, 0},
#ifndef I386COFF
{"bss", s_bss, 0},
+#else
+ {"lcomm", pe_lcomm, 1},
#endif
{"ffloat", float_cons, 'f'},
{"dfloat", float_cons, 'd'},
{"code64", set_code_flag, CODE_64BIT},
{"intel_syntax", set_intel_syntax, 1},
{"att_syntax", set_intel_syntax, 0},
+ {"intel_mnemonic", set_intel_mnemonic, 1},
+ {"att_mnemonic", set_intel_mnemonic, 0},
{"allow_index_reg", set_allow_index_reg, 1},
{"disallow_index_reg", set_allow_index_reg, 0},
+ {"sse_check", set_sse_check, 0},
#if defined (OBJ_ELF) || defined (OBJ_MAYBE_ELF)
{"largecomm", handle_large_common, 0},
#else
1. For PROCESSOR_I386, PROCESSOR_I486, PROCESSOR_PENTIUM and
PROCESSOR_GENERIC32, f32_patt will be used.
2. For PROCESSOR_PENTIUMPRO, PROCESSOR_PENTIUM4, PROCESSOR_NOCONA,
- PROCESSOR_CORE, PROCESSOR_CORE2, and PROCESSOR_GENERIC64,
- alt_long_patt will be used.
+ PROCESSOR_CORE, PROCESSOR_CORE2, PROCESSOR_COREI7, and
+ PROCESSOR_GENERIC64, alt_long_patt will be used.
3. For PROCESSOR_ATHLON, PROCESSOR_K6, PROCESSOR_K8 and
PROCESSOR_AMDFAM10, alt_short_patt will be used.
{
const char *const *patt = NULL;
- if (cpu_arch_isa == PROCESSOR_UNKNOWN)
+ if (fragP->tc_frag_data.isa == PROCESSOR_UNKNOWN)
{
/* PROCESSOR_UNKNOWN means that all ISAs may be used. */
switch (cpu_arch_tune)
case PROCESSOR_UNKNOWN:
/* We use cpu_arch_isa_flags to check if we SHOULD
optimize for Cpu686. */
- if (cpu_arch_isa_flags.bitfield.cpui686)
+ if (fragP->tc_frag_data.isa_flags.bitfield.cpui686)
patt = alt_long_patt;
else
patt = f32_patt;
case PROCESSOR_NOCONA:
case PROCESSOR_CORE:
case PROCESSOR_CORE2:
+ case PROCESSOR_COREI7:
case PROCESSOR_GENERIC64:
patt = alt_long_patt;
break;
}
else
{
- switch (cpu_arch_tune)
+ switch (fragP->tc_frag_data.tune)
{
case PROCESSOR_UNKNOWN:
- /* When cpu_arch_isa is net, cpu_arch_tune shouldn't be
+ /* When cpu_arch_isa is set, cpu_arch_tune shouldn't be
PROCESSOR_UNKNOWN. */
abort ();
break;
case PROCESSOR_GENERIC32:
/* We use cpu_arch_isa_flags to check if we CAN optimize
for Cpu686. */
- if (cpu_arch_isa_flags.bitfield.cpui686)
+ if (fragP->tc_frag_data.isa_flags.bitfield.cpui686)
patt = alt_short_patt;
else
patt = f32_patt;
case PROCESSOR_NOCONA:
case PROCESSOR_CORE:
case PROCESSOR_CORE2:
- if (cpu_arch_isa_flags.bitfield.cpui686)
+ case PROCESSOR_COREI7:
+ if (fragP->tc_frag_data.isa_flags.bitfield.cpui686)
patt = alt_long_patt;
else
patt = f32_patt;
}
static INLINE int
-uints_all_zero (const unsigned int *x, unsigned int size)
+operand_type_all_zero (const union i386_operand_type *x)
{
- switch (size)
+ switch (ARRAY_SIZE(x->array))
{
case 3:
- if (x[2])
+ if (x->array[2])
return 0;
case 2:
- if (x[1])
+ if (x->array[1])
return 0;
case 1:
- return !x[0];
+ return !x->array[0];
default:
abort ();
}
}
static INLINE void
-uints_set (unsigned int *x, unsigned int v, unsigned int size)
+operand_type_set (union i386_operand_type *x, unsigned int v)
{
- switch (size)
+ switch (ARRAY_SIZE(x->array))
{
case 3:
- x[2] = v;
+ x->array[2] = v;
case 2:
- x[1] = v;
+ x->array[1] = v;
case 1:
- x[0] = v;
+ x->array[0] = v;
break;
default:
abort ();
}
static INLINE int
-uints_equal (const unsigned int *x, const unsigned int *y,
- unsigned int size)
+operand_type_equal (const union i386_operand_type *x,
+ const union i386_operand_type *y)
{
- switch (size)
+ switch (ARRAY_SIZE(x->array))
{
case 3:
- if (x[2] != y [2])
+ if (x->array[2] != y->array[2])
return 0;
case 2:
- if (x[1] != y [1])
+ if (x->array[1] != y->array[1])
return 0;
case 1:
- return x[0] == y [0];
+ return x->array[0] == y->array[0];
break;
default:
abort ();
}
}
-#define UINTS_ALL_ZERO(x) \
- uints_all_zero ((x).array, ARRAY_SIZE ((x).array))
-#define UINTS_SET(x, v) \
- uints_set ((x).array, v, ARRAY_SIZE ((x).array))
-#define UINTS_CLEAR(x) \
- uints_set ((x).array, 0, ARRAY_SIZE ((x).array))
-#define UINTS_EQUAL(x, y) \
- uints_equal ((x).array, (y).array, ARRAY_SIZE ((x).array))
-
static INLINE int
-cpu_flags_check_cpu64 (i386_cpu_flags f)
+cpu_flags_all_zero (const union i386_cpu_flags *x)
{
- return !((flag_code == CODE_64BIT && f.bitfield.cpuno64)
- || (flag_code != CODE_64BIT && f.bitfield.cpu64));
+ switch (ARRAY_SIZE(x->array))
+ {
+ case 3:
+ if (x->array[2])
+ return 0;
+ case 2:
+ if (x->array[1])
+ return 0;
+ case 1:
+ return !x->array[0];
+ default:
+ abort ();
+ }
}
-static INLINE i386_cpu_flags
-cpu_flags_not (i386_cpu_flags x)
+static INLINE void
+cpu_flags_set (union i386_cpu_flags *x, unsigned int v)
{
- switch (ARRAY_SIZE (x.array))
+ switch (ARRAY_SIZE(x->array))
{
case 3:
- x.array [2] = ~x.array [2];
+ x->array[2] = v;
case 2:
- x.array [1] = ~x.array [1];
+ x->array[1] = v;
case 1:
- x.array [0] = ~x.array [0];
+ x->array[0] = v;
break;
default:
abort ();
}
+}
-#ifdef CpuUnused
- x.bitfield.unused = 0;
-#endif
+static INLINE int
+cpu_flags_equal (const union i386_cpu_flags *x,
+ const union i386_cpu_flags *y)
+{
+ switch (ARRAY_SIZE(x->array))
+ {
+ case 3:
+ if (x->array[2] != y->array[2])
+ return 0;
+ case 2:
+ if (x->array[1] != y->array[1])
+ return 0;
+ case 1:
+ return x->array[0] == y->array[0];
+ break;
+ default:
+ abort ();
+ }
+}
- return x;
+static INLINE int
+cpu_flags_check_cpu64 (i386_cpu_flags f)
+{
+ return !((flag_code == CODE_64BIT && f.bitfield.cpuno64)
+ || (flag_code != CODE_64BIT && f.bitfield.cpu64));
}
static INLINE i386_cpu_flags
return x;
}
+#define CPU_FLAGS_ARCH_MATCH 0x1
+#define CPU_FLAGS_64BIT_MATCH 0x2
+#define CPU_FLAGS_AES_MATCH 0x4
+#define CPU_FLAGS_PCLMUL_MATCH 0x8
+#define CPU_FLAGS_AVX_MATCH 0x10
+
+#define CPU_FLAGS_32BIT_MATCH \
+ (CPU_FLAGS_ARCH_MATCH | CPU_FLAGS_AES_MATCH \
+ | CPU_FLAGS_PCLMUL_MATCH | CPU_FLAGS_AVX_MATCH)
+#define CPU_FLAGS_PERFECT_MATCH \
+ (CPU_FLAGS_32BIT_MATCH | CPU_FLAGS_64BIT_MATCH)
+
+/* Return CPU flags match bits. */
+
static int
-cpu_flags_match (i386_cpu_flags x)
+cpu_flags_match (const template *t)
{
- i386_cpu_flags not = cpu_arch_flags_not;
-
- not.bitfield.cpu64 = 1;
- not.bitfield.cpuno64 = 1;
+ i386_cpu_flags x = t->cpu_flags;
+ int match = cpu_flags_check_cpu64 (x) ? CPU_FLAGS_64BIT_MATCH : 0;
x.bitfield.cpu64 = 0;
x.bitfield.cpuno64 = 0;
- not = cpu_flags_and (x, not);
- return UINTS_ALL_ZERO (not);
+ if (cpu_flags_all_zero (&x))
+ {
+ /* This instruction is available on all archs. */
+ match |= CPU_FLAGS_32BIT_MATCH;
+ }
+ else
+ {
+ /* This instruction is available only on some archs. */
+ i386_cpu_flags cpu = cpu_arch_flags;
+
+ cpu.bitfield.cpu64 = 0;
+ cpu.bitfield.cpuno64 = 0;
+ cpu = cpu_flags_and (x, cpu);
+ if (!cpu_flags_all_zero (&cpu))
+ {
+ if (x.bitfield.cpuavx)
+ {
+ /* We only need to check AES/PCLMUL/SSE2AVX with AVX. */
+ if (cpu.bitfield.cpuavx)
+ {
+ /* Check SSE2AVX. */
+ if (!t->opcode_modifier.sse2avx|| sse2avx)
+ {
+ match |= (CPU_FLAGS_ARCH_MATCH
+ | CPU_FLAGS_AVX_MATCH);
+ /* Check AES. */
+ if (!x.bitfield.cpuaes || cpu.bitfield.cpuaes)
+ match |= CPU_FLAGS_AES_MATCH;
+ /* Check PCLMUL. */
+ if (!x.bitfield.cpupclmul
+ || cpu.bitfield.cpupclmul)
+ match |= CPU_FLAGS_PCLMUL_MATCH;
+ }
+ }
+ else
+ match |= CPU_FLAGS_ARCH_MATCH;
+ }
+ else
+ match |= CPU_FLAGS_32BIT_MATCH;
+ }
+ }
+ return match;
}
static INLINE i386_operand_type
static const i386_operand_type acc32 = OPERAND_TYPE_ACC32;
static const i386_operand_type acc64 = OPERAND_TYPE_ACC64;
static const i386_operand_type control = OPERAND_TYPE_CONTROL;
+static const i386_operand_type inoutportreg
+ = OPERAND_TYPE_INOUTPORTREG;
static const i386_operand_type reg16_inoutportreg
= OPERAND_TYPE_REG16_INOUTPORTREG;
static const i386_operand_type disp16 = OPERAND_TYPE_DISP16;
static const i386_operand_type anydisp
= OPERAND_TYPE_ANYDISP;
static const i386_operand_type regxmm = OPERAND_TYPE_REGXMM;
+static const i386_operand_type regymm = OPERAND_TYPE_REGYMM;
static const i386_operand_type imm8 = OPERAND_TYPE_IMM8;
static const i386_operand_type imm8s = OPERAND_TYPE_IMM8S;
static const i386_operand_type imm16 = OPERAND_TYPE_IMM16;
default:
abort ();
}
+
+ return 0;
+}
+
+/* Return 1 if there is no conflict in 8bit/16bit/32bit/64bit on
+ operand J for instruction template T. */
+
+static INLINE int
+match_reg_size (const template *t, unsigned int j)
+{
+ return !((i.types[j].bitfield.byte
+ && !t->operand_types[j].bitfield.byte)
+ || (i.types[j].bitfield.word
+ && !t->operand_types[j].bitfield.word)
+ || (i.types[j].bitfield.dword
+ && !t->operand_types[j].bitfield.dword)
+ || (i.types[j].bitfield.qword
+ && !t->operand_types[j].bitfield.qword));
+}
+
+/* Return 1 if there is no conflict in any size on operand J for
+ instruction template T. */
+
+static INLINE int
+match_mem_size (const template *t, unsigned int j)
+{
+ return (match_reg_size (t, j)
+ && !((i.types[j].bitfield.unspecified
+ && !t->operand_types[j].bitfield.unspecified)
+ || (i.types[j].bitfield.fword
+ && !t->operand_types[j].bitfield.fword)
+ || (i.types[j].bitfield.tbyte
+ && !t->operand_types[j].bitfield.tbyte)
+ || (i.types[j].bitfield.xmmword
+ && !t->operand_types[j].bitfield.xmmword)
+ || (i.types[j].bitfield.ymmword
+ && !t->operand_types[j].bitfield.ymmword)));
+}
+
+/* Return 1 if there is no size conflict on any operands for
+ instruction template T. */
+
+static INLINE int
+operand_size_match (const template *t)
+{
+ unsigned int j;
+ int match = 1;
+
+ /* Don't check jump instructions. */
+ if (t->opcode_modifier.jump
+ || t->opcode_modifier.jumpbyte
+ || t->opcode_modifier.jumpdword
+ || t->opcode_modifier.jumpintersegment)
+ return match;
+
+ /* Check memory and accumulator operand size. */
+ for (j = 0; j < i.operands; j++)
+ {
+ if (t->operand_types[j].bitfield.anysize)
+ continue;
+
+ if (t->operand_types[j].bitfield.acc && !match_reg_size (t, j))
+ {
+ match = 0;
+ break;
+ }
+
+ if (i.types[j].bitfield.mem && !match_mem_size (t, j))
+ {
+ match = 0;
+ break;
+ }
+ }
+
+ if (match
+ || (!t->opcode_modifier.d && !t->opcode_modifier.floatd))
+ return match;
+
+ /* Check reverse. */
+ gas_assert (i.operands == 2);
+
+ match = 1;
+ for (j = 0; j < 2; j++)
+ {
+ if (t->operand_types[j].bitfield.acc
+ && !match_reg_size (t, j ? 0 : 1))
+ {
+ match = 0;
+ break;
+ }
+
+ if (i.types[j].bitfield.mem
+ && !match_mem_size (t, j ? 0 : 1))
+ {
+ match = 0;
+ break;
+ }
+ }
+
+ return match;
}
static INLINE int
i386_operand_type temp = overlap;
temp.bitfield.jumpabsolute = 0;
- if (UINTS_ALL_ZERO (temp))
+ temp.bitfield.unspecified = 0;
+ temp.bitfield.byte = 0;
+ temp.bitfield.word = 0;
+ temp.bitfield.dword = 0;
+ temp.bitfield.fword = 0;
+ temp.bitfield.qword = 0;
+ temp.bitfield.tbyte = 0;
+ temp.bitfield.xmmword = 0;
+ temp.bitfield.ymmword = 0;
+ if (operand_type_all_zero (&temp))
return 0;
return (given.bitfield.baseindex == overlap.bitfield.baseindex
&& given.bitfield.jumpabsolute == overlap.bitfield.jumpabsolute);
}
-/* If given types r0 and r1 are registers they must be of the same type
+/* If given types g0 and g1 are registers they must be of the same type
unless the expected operand type register overlap is null.
Note that Acc in a template matches every size of reg. */
smallest_imm_type (offsetT num)
{
i386_operand_type t;
-
- UINTS_CLEAR (t);
+
+ operand_type_set (&t, 0);
t.bitfield.imm64 = 1;
if (cpu_arch_tune != PROCESSOR_I486 && num == 1)
{
cpu_arch_flags.bitfield.cpu64 = 1;
cpu_arch_flags.bitfield.cpuno64 = 0;
- cpu_arch_flags_not.bitfield.cpu64 = 0;
- cpu_arch_flags_not.bitfield.cpuno64 = 1;
}
else
{
cpu_arch_flags.bitfield.cpu64 = 0;
cpu_arch_flags.bitfield.cpuno64 = 1;
- cpu_arch_flags_not.bitfield.cpu64 = 1;
- cpu_arch_flags_not.bitfield.cpuno64 = 0;
}
if (value == CODE_64BIT && !cpu_arch_flags.bitfield.cpulm )
{
abort ();
cpu_arch_flags.bitfield.cpu64 = 0;
cpu_arch_flags.bitfield.cpuno64 = 1;
- cpu_arch_flags_not.bitfield.cpu64 = 1;
- cpu_arch_flags_not.bitfield.cpuno64 = 0;
stackop_size = LONG_MNEM_SUFFIX;
}
else
allow_naked_reg = (ask_naked_reg < 0);
+ expr_set_rank (O_full_ptr, syntax_flag ? 10 : 0);
+
identifier_chars['%'] = intel_syntax && allow_naked_reg ? '%' : 0;
identifier_chars['$'] = intel_syntax ? '$' : 0;
register_prefix = allow_naked_reg ? "" : "%";
}
+static void
+set_intel_mnemonic (int mnemonic_flag)
+{
+ intel_mnemonic = mnemonic_flag;
+}
+
static void
set_allow_index_reg (int flag)
{
allow_index_reg = flag;
}
+static void
+set_sse_check (int dummy ATTRIBUTE_UNUSED)
+{
+ SKIP_WHITESPACE ();
+
+ if (!is_end_of_line[(unsigned char) *input_line_pointer])
+ {
+ char *string = input_line_pointer;
+ int e = get_symbol_end ();
+
+ if (strcmp (string, "none") == 0)
+ sse_check = sse_check_none;
+ else if (strcmp (string, "warning") == 0)
+ sse_check = sse_check_warning;
+ else if (strcmp (string, "error") == 0)
+ sse_check = sse_check_error;
+ else
+ as_bad (_("bad argument to sse_check directive."));
+ *input_line_pointer = e;
+ }
+ else
+ as_bad (_("missing argument for sse_check directive"));
+
+ demand_empty_rest_of_line ();
+}
+
static void
set_cpu_arch (int dummy ATTRIBUTE_UNUSED)
{
cpu_arch_flags.bitfield.cpu64 = 0;
cpu_arch_flags.bitfield.cpuno64 = 1;
}
- cpu_arch_flags_not = cpu_flags_not (cpu_arch_flags);
cpu_arch_isa = cpu_arch[i].type;
cpu_arch_isa_flags = cpu_arch[i].flags;
if (!cpu_arch_tune_set)
flags = cpu_flags_or (cpu_arch_flags,
cpu_arch[i].flags);
- if (!UINTS_EQUAL (flags, cpu_arch_flags))
+ if (!cpu_flags_equal (&flags, &cpu_arch_flags))
{
- cpu_sub_arch_name = cpu_arch[i].name;
+ if (cpu_sub_arch_name)
+ {
+ char *name = cpu_sub_arch_name;
+ cpu_sub_arch_name = concat (name,
+ cpu_arch[i].name,
+ (const char *) NULL);
+ free (name);
+ }
+ else
+ cpu_sub_arch_name = xstrdup (cpu_arch[i].name);
cpu_arch_flags = flags;
- cpu_arch_flags_not = cpu_flags_not (cpu_arch_flags);
}
*input_line_pointer = e;
demand_empty_rest_of_line ();
{
const char *hash_err;
- cpu_arch_flags_not = cpu_flags_not (cpu_arch_flags);
-
/* Initialize op_hash hash table. */
op_hash = hash_new ();
core_optab->end = optab;
hash_err = hash_insert (op_hash,
(optab - 1)->name,
- (PTR) core_optab);
+ (void *) core_optab);
if (hash_err)
{
as_fatal (_("Internal Error: Can't hash %s: %s"),
for (regtab = i386_regtab; regtab_size--; regtab++)
{
- hash_err = hash_insert (reg_hash, regtab->reg_name, (PTR) regtab);
+ hash_err = hash_insert (reg_hash, regtab->reg_name, (void *) regtab);
if (hash_err)
as_fatal (_("Internal Error: Can't hash %s: %s"),
regtab->reg_name,
operand_chars['?'] = '?';
#endif
digit_chars['-'] = '-';
+ mnemonic_chars['_'] = '_';
mnemonic_chars['-'] = '-';
mnemonic_chars['.'] = '.';
identifier_chars['_'] = '_';
(x->rex & REX_R) != 0,
(x->rex & REX_X) != 0,
(x->rex & REX_B) != 0);
- fprintf (stdout, " drex: reg %d rex 0x%x\n",
- x->drex.reg, x->drex.rex);
for (i = 0; i < x->operands; i++)
{
fprintf (stdout, " #%d: ", i + 1);
|| x->types[i].bitfield.reg64
|| x->types[i].bitfield.regmmx
|| x->types[i].bitfield.regxmm
+ || x->types[i].bitfield.regymm
|| x->types[i].bitfield.sreg2
|| x->types[i].bitfield.sreg3
|| x->types[i].bitfield.control
{ OPERAND_TYPE_JUMPABSOLUTE, "Jump Absolute" },
{ OPERAND_TYPE_REGMMX, "rMMX" },
{ OPERAND_TYPE_REGXMM, "rXMM" },
+ { OPERAND_TYPE_REGYMM, "rYMM" },
{ OPERAND_TYPE_ESSEG, "es" },
};
for (j = 0; j < ARRAY_SIZE (type_names); j++)
{
a = operand_type_and (t, type_names[j].mask);
- if (!UINTS_ALL_ZERO (a))
+ if (!operand_type_all_zero (&a))
fprintf (stdout, "%s, ", type_names[j].name);
}
fflush (stdout);
sign > 0 ? "signed" : "unsigned", size);
}
- abort ();
- return BFD_RELOC_NONE;
+ return NO_RELOC;
}
/* Here we decide which fixups can be adjusted to make them relative to
|| fixP->fx_r_type == BFD_RELOC_VTABLE_INHERIT
|| fixP->fx_r_type == BFD_RELOC_VTABLE_ENTRY)
return 0;
+
+ if (fixP->fx_addsy != NULL
+ && symbol_get_bfdsym (fixP->fx_addsy)->flags & BSF_GNU_INDIRECT_FUNCTION)
+ return 0;
#endif
return 1;
}
return 1;
}
+/* Build the VEX prefix. */
+
+static void
+build_vex_prefix (const template *t)
+{
+ unsigned int register_specifier;
+ unsigned int implied_prefix;
+ unsigned int vector_length;
+
+ /* Check register specifier. */
+ if (i.vex.register_specifier)
+ {
+ register_specifier = i.vex.register_specifier->reg_num;
+ if ((i.vex.register_specifier->reg_flags & RegRex))
+ register_specifier += 8;
+ register_specifier = ~register_specifier & 0xf;
+ }
+ else
+ register_specifier = 0xf;
+
+ /* Use 2-byte VEX prefix by swappping destination and source
+ operand. */
+ if (!i.swap_operand
+ && i.operands == i.reg_operands
+ && i.tm.opcode_modifier.vex0f
+ && i.tm.opcode_modifier.s
+ && i.rex == REX_B)
+ {
+ unsigned int xchg = i.operands - 1;
+ union i386_op temp_op;
+ i386_operand_type temp_type;
+
+ temp_type = i.types[xchg];
+ i.types[xchg] = i.types[0];
+ i.types[0] = temp_type;
+ temp_op = i.op[xchg];
+ i.op[xchg] = i.op[0];
+ i.op[0] = temp_op;
+
+ gas_assert (i.rm.mode == 3);
+
+ i.rex = REX_R;
+ xchg = i.rm.regmem;
+ i.rm.regmem = i.rm.reg;
+ i.rm.reg = xchg;
+
+ /* Use the next insn. */
+ i.tm = t[1];
+ }
+
+ vector_length = i.tm.opcode_modifier.vex256 ? 1 : 0;
+
+ switch ((i.tm.base_opcode >> 8) & 0xff)
+ {
+ case 0:
+ implied_prefix = 0;
+ break;
+ case DATA_PREFIX_OPCODE:
+ implied_prefix = 1;
+ break;
+ case REPE_PREFIX_OPCODE:
+ implied_prefix = 2;
+ break;
+ case REPNE_PREFIX_OPCODE:
+ implied_prefix = 3;
+ break;
+ default:
+ abort ();
+ }
+
+ /* Use 2-byte VEX prefix if possible. */
+ if (i.tm.opcode_modifier.vex0f
+ && (i.rex & (REX_W | REX_X | REX_B)) == 0)
+ {
+ /* 2-byte VEX prefix. */
+ unsigned int r;
+
+ i.vex.length = 2;
+ i.vex.bytes[0] = 0xc5;
+
+ /* Check the REX.R bit. */
+ r = (i.rex & REX_R) ? 0 : 1;
+ i.vex.bytes[1] = (r << 7
+ | register_specifier << 3
+ | vector_length << 2
+ | implied_prefix);
+ }
+ else
+ {
+ /* 3-byte VEX prefix. */
+ unsigned int m, w;
+
+ if (i.tm.opcode_modifier.vex0f)
+ m = 0x1;
+ else if (i.tm.opcode_modifier.vex0f38)
+ m = 0x2;
+ else if (i.tm.opcode_modifier.vex0f3a)
+ m = 0x3;
+ else
+ abort ();
+
+ i.vex.length = 3;
+ i.vex.bytes[0] = 0xc4;
+
+ /* The high 3 bits of the second VEX byte are 1's compliment
+ of RXB bits from REX. */
+ i.vex.bytes[1] = (~i.rex & 0x7) << 5 | m;
+
+ /* Check the REX.W bit. */
+ w = (i.rex & REX_W) ? 1 : 0;
+ if (i.tm.opcode_modifier.vexw0 || i.tm.opcode_modifier.vexw1)
+ {
+ if (w)
+ abort ();
+
+ if (i.tm.opcode_modifier.vexw1)
+ w = 1;
+ }
+
+ i.vex.bytes[2] = (w << 7
+ | register_specifier << 3
+ | vector_length << 2
+ | implied_prefix);
+ }
+}
+
+static void
+process_immext (void)
+{
+ expressionS *exp;
+
+ if (i.tm.cpu_flags.bitfield.cpusse3 && i.operands > 0)
+ {
+ /* SSE3 Instructions have the fixed operands with an opcode
+ suffix which is coded in the same place as an 8-bit immediate
+ field would be. Here we check those operands and remove them
+ afterwards. */
+ unsigned int x;
+
+ for (x = 0; x < i.operands; x++)
+ if (i.op[x].regs->reg_num != x)
+ as_bad (_("can't use register '%s%s' as operand %d in '%s'."),
+ register_prefix, i.op[x].regs->reg_name, x + 1,
+ i.tm.name);
+
+ i.operands = 0;
+ }
+
+ /* These AMD 3DNow! and SSE2 instructions have an opcode suffix
+ which is coded in the same place as an 8-bit immediate field
+ would be. Here we fake an 8-bit immediate operand from the
+ opcode suffix stored in tm.extension_opcode.
+
+ AVX instructions also use this encoding, for some of
+ 3 argument instructions. */
+
+ gas_assert (i.imm_operands == 0
+ && (i.operands <= 2
+ || (i.tm.opcode_modifier.vex
+ && i.operands <= 4)));
+
+ exp = &im_expressions[i.imm_operands++];
+ i.op[i.operands].imms = exp;
+ i.types[i.operands] = imm8;
+ i.operands++;
+ exp->X_op = O_constant;
+ exp->X_add_number = i.tm.extension_opcode;
+ i.tm.extension_opcode = None;
+}
+
/* This is the guts of the machine-dependent assembler. LINE points to a
machine dependent instruction. This function is supposed to emit
the frags/bytes it assembles to. */
void
-md_assemble (line)
- char *line;
+md_assemble (char *line)
{
unsigned int j;
char mnemonic[MAX_MNEM_SIZE];
+ const template *t;
/* Initialize globals. */
memset (&i, '\0', sizeof (i));
return;
line = parse_operands (line, mnemonic);
+ this_operand = -1;
if (line == NULL)
return;
making sure the overlap of the given operands types is consistent
with the template operand types. */
- if (!match_template ())
+ if (!(t = match_template ()))
return;
- if (intel_syntax)
+ if (sse_check != sse_check_none
+ && !i.tm.opcode_modifier.noavx
+ && (i.tm.cpu_flags.bitfield.cpusse
+ || i.tm.cpu_flags.bitfield.cpusse2
+ || i.tm.cpu_flags.bitfield.cpusse3
+ || i.tm.cpu_flags.bitfield.cpussse3
+ || i.tm.cpu_flags.bitfield.cpusse4_1
+ || i.tm.cpu_flags.bitfield.cpusse4_2))
{
- /* Undo SYSV386_COMPAT brokenness when in Intel mode. See i386.h */
- if (SYSV386_COMPAT
- && (i.tm.base_opcode & 0xfffffde0) == 0xdce0)
- i.tm.base_opcode ^= Opcode_FloatR;
+ (sse_check == sse_check_warning
+ ? as_warn
+ : as_bad) (_("SSE instruction `%s' is used"), i.tm.name);
+ }
- /* Zap movzx and movsx suffix. The suffix may have been set from
- "word ptr" or "byte ptr" on the source operand, but we'll use
- the suffix later to choose the destination register. */
- if ((i.tm.base_opcode & ~9) == 0x0fb6)
- {
- if (i.reg_operands < 2
- && !i.suffix
- && (!i.tm.opcode_modifier.no_bsuf
- || !i.tm.opcode_modifier.no_wsuf
- || !i.tm.opcode_modifier.no_lsuf
- || !i.tm.opcode_modifier.no_ssuf
- || !i.tm.opcode_modifier.no_xsuf
- || !i.tm.opcode_modifier.no_qsuf))
- as_bad (_("ambiguous operand size for `%s'"), i.tm.name);
-
- i.suffix = 0;
- }
+ /* Zap movzx and movsx suffix. The suffix has been set from
+ "word ptr" or "byte ptr" on the source operand in Intel syntax
+ or extracted from mnemonic in AT&T syntax. But we'll use
+ the destination register to choose the suffix for encoding. */
+ if ((i.tm.base_opcode & ~9) == 0x0fb6)
+ {
+ /* In Intel syntax, there must be a suffix. In AT&T syntax, if
+ there is no suffix, the default will be byte extension. */
+ if (i.reg_operands != 2
+ && !i.suffix
+ && intel_syntax)
+ as_bad (_("ambiguous operand size for `%s'"), i.tm.name);
+
+ i.suffix = 0;
}
if (i.tm.opcode_modifier.fwait)
{
if (!check_string ())
return;
+ i.disp_operands = 0;
}
if (!process_suffix ())
if (i.types[0].bitfield.imm1)
i.imm_operands = 0; /* kludge for shift insns. */
- for (j = 0; j < 3; j++)
+ for (j = 0; j < i.operands; j++)
if (i.types[j].bitfield.inoutportreg
|| i.types[j].bitfield.shiftcount
|| i.types[j].bitfield.acc
|| i.types[j].bitfield.floatacc)
i.reg_operands--;
- if (i.tm.opcode_modifier.immext)
- {
- expressionS *exp;
-
- if (i.tm.cpu_flags.bitfield.cpusse3 && i.operands > 0)
- {
- /* Streaming SIMD extensions 3 Instructions have the fixed
- operands with an opcode suffix which is coded in the same
- place as an 8-bit immediate field would be. Here we check
- those operands and remove them afterwards. */
- unsigned int x;
-
- for (x = 0; x < i.operands; x++)
- if (i.op[x].regs->reg_num != x)
- as_bad (_("can't use register '%s%s' as operand %d in '%s'."),
- register_prefix,
- i.op[x].regs->reg_name,
- x + 1,
- i.tm.name);
- i.operands = 0;
- }
-
- /* These AMD 3DNow! and Intel Katmai New Instructions have an
- opcode suffix which is coded in the same place as an 8-bit
- immediate field would be. Here we fake an 8-bit immediate
- operand from the opcode suffix stored in tm.extension_opcode.
- SSE5 also uses this encoding, for some of its 3 argument
- instructions. */
-
- assert (i.imm_operands == 0
- && (i.operands <= 2
- || (i.tm.cpu_flags.bitfield.cpusse5
- && i.operands <= 3)));
-
- exp = &im_expressions[i.imm_operands++];
- i.op[i.operands].imms = exp;
- UINTS_CLEAR (i.types[i.operands]);
- i.types[i.operands].bitfield.imm8 = 1;
- i.operands++;
- exp->X_op = O_constant;
- exp->X_add_number = i.tm.extension_opcode;
- i.tm.extension_opcode = None;
- }
+ /* ImmExt should be processed after SSE2AVX. */
+ if (!i.tm.opcode_modifier.sse2avx
+ && i.tm.opcode_modifier.immext)
+ process_immext ();
/* For insns with operands there are more diddles to do to the opcode. */
if (i.operands)
as_warn (_("translating to `%sp'"), i.tm.name);
}
+ if (i.tm.opcode_modifier.vex)
+ build_vex_prefix (t);
+
/* Handle conversion of 'int $3' --> special int3 insn. */
if (i.tm.base_opcode == INT_OPCODE && i.op[0].imms->X_add_number == 3)
{
}
}
- /* If the instruction has the DREX attribute (aka SSE5), don't emit a
- REX prefix. */
- if (i.tm.opcode_modifier.drex || i.tm.opcode_modifier.drexc)
- {
- i.drex.rex = i.rex;
- i.rex = 0;
- }
- else if (i.rex != 0)
+ if (i.rex != 0)
add_prefix (REX_OPCODE | i.rex);
/* We are ready to output the insn. */
char *mnem_p;
int supported;
const template *t;
+ char *dot_p = NULL;
/* Non-zero if we found a prefix only acceptable with string insns. */
const char *expecting_string_instruction = NULL;
mnem_p = mnemonic;
while ((*mnem_p = mnemonic_chars[(unsigned char) *l]) != 0)
{
+ if (*mnem_p == '.')
+ dot_p = mnem_p;
mnem_p++;
if (mnem_p >= mnemonic + MAX_MNEM_SIZE)
{
if (!current_templates)
{
+ /* Check if we should swap operand in encoding. */
+ if (mnem_p - 2 == dot_p && dot_p[1] == 's')
+ i.swap_operand = 1;
+ else
+ goto check_suffix;
+ mnem_p = dot_p;
+ *dot_p = '\0';
+ current_templates = hash_find (op_hash, mnemonic);
+ }
+
+ if (!current_templates)
+ {
+check_suffix:
/* See if we can get a match by trimming off a suffix. */
switch (mnem_p[-1])
{
supported = 0;
for (t = current_templates->start; t < current_templates->end; ++t)
{
- if (cpu_flags_match (t->cpu_flags))
- supported |= 1;
- if (cpu_flags_check_cpu64 (t->cpu_flags))
- supported |= 2;
+ supported |= cpu_flags_match (t);
+ if (supported == CPU_FLAGS_PERFECT_MATCH)
+ goto skip;
}
- if (!(supported & 2))
+
+ if (!(supported & CPU_FLAGS_64BIT_MATCH))
{
as_bad (flag_code == CODE_64BIT
? _("`%s' is not supported in 64-bit mode")
current_templates->start->name);
return NULL;
}
- if (!(supported & 1))
+ if (supported != CPU_FLAGS_PERFECT_MATCH)
{
- as_warn (_("`%s' is not supported on `%s%s'"),
- current_templates->start->name,
- cpu_arch_name,
- cpu_sub_arch_name ? cpu_sub_arch_name : "");
+ as_bad (_("`%s' is not supported on `%s%s'"),
+ current_templates->start->name,
+ cpu_arch_name ? cpu_arch_name : default_arch,
+ cpu_sub_arch_name ? cpu_sub_arch_name : "");
+ return NULL;
}
- else if (!cpu_arch_flags.bitfield.cpui386
+
+skip:
+ if (!cpu_arch_flags.bitfield.cpui386
&& (flag_code != CODE_16BIT))
{
as_warn (_("use .code16 to ensure correct addressing mode"));
{ /* Yes, we've read in another operand. */
unsigned int operand_ok;
this_operand = i.operands++;
+ i.types[this_operand].bitfield.unspecified = 1;
if (i.operands > MAX_OPERANDS)
{
as_bad (_("spurious operands; (%d operands/instruction max)"),
i386_intel_operand (token_start,
intel_float_operand (mnemonic));
else
- operand_ok = i386_operand (token_start);
+ operand_ok = i386_att_operand (token_start);
RESTORE_END_STRING (l);
if (!operand_ok)
{
switch (i.operands)
{
+ case 5:
case 4:
swap_2_operands (1, i.operands - 2);
case 3:
In any case, we can't set i.suffix yet. */
for (op = i.operands; --op >= 0;)
if (i.types[op].bitfield.reg8)
- {
+ {
guess_suffix = BYTE_MNEM_SUFFIX;
break;
}
i386_operand_type mask, allowed;
const template *t;
- UINTS_CLEAR (mask);
- UINTS_CLEAR (allowed);
+ operand_type_set (&mask, 0);
+ operand_type_set (&allowed, 0);
for (t = current_templates->start;
t < current_templates->end;
break;
}
allowed = operand_type_and (mask, allowed);
- if (!UINTS_ALL_ZERO (allowed))
+ if (!operand_type_all_zero (&allowed))
i.types[op] = operand_type_and (i.types[op], mask);
}
break;
}
}
-static int
+static const template *
match_template (void)
{
/* Points to template once we've found it. */
const template *t;
i386_operand_type overlap0, overlap1, overlap2, overlap3;
+ i386_operand_type overlap4;
unsigned int found_reverse_match;
i386_opcode_modifier suffix_check;
i386_operand_type operand_types [MAX_OPERANDS];
int addr_prefix_disp;
unsigned int j;
- i386_cpu_flags overlap;
+ unsigned int found_cpu_match;
+ unsigned int check_register;
-#if MAX_OPERANDS != 4
-# error "MAX_OPERANDS must be 4."
+#if MAX_OPERANDS != 5
+# error "MAX_OPERANDS must be 5."
#endif
found_reverse_match = 0;
else if (i.suffix == QWORD_MNEM_SUFFIX)
suffix_check.no_qsuf = 1;
else if (i.suffix == LONG_DOUBLE_MNEM_SUFFIX)
- suffix_check.no_xsuf = 1;
+ suffix_check.no_ldsuf = 1;
for (t = current_templates->start; t < current_templates->end; t++)
{
if (i.operands != t->operands)
continue;
+ /* Check processor support. */
+ found_cpu_match = (cpu_flags_match (t)
+ == CPU_FLAGS_PERFECT_MATCH);
+ if (!found_cpu_match)
+ continue;
+
+ /* Check old gcc support. */
+ if (!old_gcc && t->opcode_modifier.oldgcc)
+ continue;
+
+ /* Check AT&T mnemonic. */
+ if (intel_mnemonic && t->opcode_modifier.attmnemonic)
+ continue;
+
+ /* Check AT&T syntax Intel syntax. */
+ if ((intel_syntax && t->opcode_modifier.attsyntax)
+ || (!intel_syntax && t->opcode_modifier.intelsyntax))
+ continue;
+
/* Check the suffix, except for some instructions in intel mode. */
- if (((t->opcode_modifier.no_bsuf & suffix_check.no_bsuf)
- || (t->opcode_modifier.no_wsuf & suffix_check.no_wsuf)
- || (t->opcode_modifier.no_lsuf & suffix_check.no_lsuf)
- || (t->opcode_modifier.no_ssuf & suffix_check.no_ssuf)
- || (t->opcode_modifier.no_qsuf & suffix_check.no_qsuf)
- || (t->opcode_modifier.no_xsuf & suffix_check.no_xsuf))
- && !(intel_syntax && t->opcode_modifier.ignoresize))
+ if ((!intel_syntax || !t->opcode_modifier.ignoresize)
+ && ((t->opcode_modifier.no_bsuf && suffix_check.no_bsuf)
+ || (t->opcode_modifier.no_wsuf && suffix_check.no_wsuf)
+ || (t->opcode_modifier.no_lsuf && suffix_check.no_lsuf)
+ || (t->opcode_modifier.no_ssuf && suffix_check.no_ssuf)
+ || (t->opcode_modifier.no_qsuf && suffix_check.no_qsuf)
+ || (t->opcode_modifier.no_ldsuf && suffix_check.no_ldsuf)))
+ continue;
+
+ if (!operand_size_match (t))
continue;
for (j = 0; j < MAX_OPERANDS; j++)
- operand_types [j] = t->operand_types [j];
+ operand_types[j] = t->operand_types[j];
/* In general, don't allow 64-bit operands in 32-bit mode. */
if (i.suffix == QWORD_MNEM_SUFFIX
&& !intel_float_operand (t->name))
: intel_float_operand (t->name) != 2)
&& ((!operand_types[0].bitfield.regmmx
- && !operand_types[0].bitfield.regxmm)
+ && !operand_types[0].bitfield.regxmm
+ && !operand_types[0].bitfield.regymm)
|| (!operand_types[t->operands > 1].bitfield.regmmx
- && !!operand_types[t->operands > 1].bitfield.regxmm))
+ && !!operand_types[t->operands > 1].bitfield.regxmm
+ && !!operand_types[t->operands > 1].bitfield.regymm))
&& (t->base_opcode != 0x0fc7
|| t->extension_opcode != 1 /* cmpxchg8b */))
continue;
+ /* In general, don't allow 32-bit operands on pre-386. */
+ else if (i.suffix == LONG_MNEM_SUFFIX
+ && !cpu_arch_flags.bitfield.cpui386
+ && (intel_syntax
+ ? (!t->opcode_modifier.ignoresize
+ && !intel_float_operand (t->name))
+ : intel_float_operand (t->name) != 2)
+ && ((!operand_types[0].bitfield.regmmx
+ && !operand_types[0].bitfield.regxmm)
+ || (!operand_types[t->operands > 1].bitfield.regmmx
+ && !!operand_types[t->operands > 1].bitfield.regxmm)))
+ continue;
+
/* Do not verify operands when there are none. */
- else
+ else
{
- overlap = cpu_flags_and (t->cpu_flags, cpu_arch_flags_not);
if (!t->operands)
- {
- if (!UINTS_ALL_ZERO (overlap))
- continue;
- /* We've found a match; break out of loop. */
- break;
- }
+ /* We've found a match; break out of loop. */
+ break;
}
/* Address size prefix will turn Disp64/Disp32/Disp16 operand
}
}
+ /* We check register size only if size of operands can be
+ encoded the canonical way. */
+ check_register = t->opcode_modifier.w;
overlap0 = operand_type_and (i.types[0], operand_types[0]);
switch (t->operands)
{
zero-extend %eax to %rax. */
if (flag_code == CODE_64BIT
&& t->base_opcode == 0x90
- && UINTS_EQUAL (i.types [0], acc32)
- && UINTS_EQUAL (i.types [1], acc32))
+ && operand_type_equal (&i.types [0], &acc32)
+ && operand_type_equal (&i.types [1], &acc32))
continue;
+ if (i.swap_operand)
+ {
+ /* If we swap operand in encoding, we either match
+ the next one or reverse direction of operands. */
+ if (t->opcode_modifier.s)
+ continue;
+ else if (t->opcode_modifier.d)
+ goto check_reverse;
+ }
+
case 3:
+ /* If we swap operand in encoding, we match the next one. */
+ if (i.swap_operand && t->opcode_modifier.s)
+ continue;
case 4:
+ case 5:
overlap1 = operand_type_and (i.types[1], operand_types[1]);
if (!operand_type_match (overlap0, i.types[0])
|| !operand_type_match (overlap1, i.types[1])
- /* monitor in SSE3 is a very special case. The first
- register and the second register may have different
- sizes. The same applies to crc32 in SSE4.2. It is
- also true for invlpga, vmload, vmrun and vmsave in
- SVME. */
- || !((t->base_opcode == 0x0f01
- && (t->extension_opcode == 0xc8
- || t->extension_opcode == 0xd8
- || t->extension_opcode == 0xda
- || t->extension_opcode == 0xdb
- || t->extension_opcode == 0xdf))
- || t->base_opcode == 0xf20f38f1
- || operand_type_register_match (overlap0, i.types[0],
+ || (check_register
+ && !operand_type_register_match (overlap0, i.types[0],
operand_types[0],
overlap1, i.types[1],
operand_types[1])))
if (!t->opcode_modifier.d && !t->opcode_modifier.floatd)
continue;
+check_reverse:
/* Try reversing direction of operands. */
overlap0 = operand_type_and (i.types[0], operand_types[1]);
overlap1 = operand_type_and (i.types[1], operand_types[0]);
if (!operand_type_match (overlap0, i.types[0])
|| !operand_type_match (overlap1, i.types[1])
- || !operand_type_register_match (overlap0, i.types[0],
- operand_types[1],
- overlap1, i.types[1],
- operand_types[0]))
+ || (check_register
+ && !operand_type_register_match (overlap0,
+ i.types[0],
+ operand_types[1],
+ overlap1,
+ i.types[1],
+ operand_types[0])))
{
/* Does not match either direction. */
continue;
/* Found a forward 2 operand match here. */
switch (t->operands)
{
+ case 5:
+ overlap4 = operand_type_and (i.types[4],
+ operand_types[4]);
case 4:
overlap3 = operand_type_and (i.types[3],
operand_types[3]);
switch (t->operands)
{
+ case 5:
+ if (!operand_type_match (overlap4, i.types[4])
+ || !operand_type_register_match (overlap3,
+ i.types[3],
+ operand_types[3],
+ overlap4,
+ i.types[4],
+ operand_types[4]))
+ continue;
case 4:
if (!operand_type_match (overlap3, i.types[3])
- || !operand_type_register_match (overlap2,
- i.types[2],
- operand_types[2],
- overlap3,
- i.types[3],
- operand_types[3]))
+ || (check_register
+ && !operand_type_register_match (overlap2,
+ i.types[2],
+ operand_types[2],
+ overlap3,
+ i.types[3],
+ operand_types[3])))
continue;
case 3:
/* Here we make use of the fact that there are no
operand instructions only need to be checked for
register consistency between operands 2 and 3. */
if (!operand_type_match (overlap2, i.types[2])
- || !operand_type_register_match (overlap1,
- i.types[1],
- operand_types[1],
- overlap2,
- i.types[2],
- operand_types[2]))
+ || (check_register
+ && !operand_type_register_match (overlap1,
+ i.types[1],
+ operand_types[1],
+ overlap2,
+ i.types[2],
+ operand_types[2])))
continue;
break;
}
/* Found either forward/reverse 2, 3 or 4 operand match here:
slip through to break. */
}
- if (!UINTS_ALL_ZERO (overlap))
+ if (!found_cpu_match)
{
found_reverse_match = 0;
continue;
}
+
/* We've found a match; break out of loop. */
break;
}
if (t == current_templates->end)
{
/* We found no match. */
- as_bad (_("suffix or operands invalid for `%s'"),
- current_templates->start->name);
- return 0;
+ if (intel_syntax)
+ as_bad (_("ambiguous operand size or operands invalid for `%s'"),
+ current_templates->start->name);
+ else
+ as_bad (_("suffix or operands invalid for `%s'"),
+ current_templates->start->name);
+ return NULL;
}
if (!quiet_warnings)
i.tm.operand_types[1] = operand_types[0];
}
- return 1;
+ return t;
}
static int
{
if (i.seg[0] != NULL && i.seg[0] != &es)
{
- as_bad (_("`%s' operand %d must use `%%es' segment"),
+ as_bad (_("`%s' operand %d must use `%ses' segment"),
i.tm.name,
- mem_op + 1);
+ mem_op + 1,
+ register_prefix);
return 0;
}
/* There's only ever one segment override allowed per instruction.
{
if (i.seg[1] != NULL && i.seg[1] != &es)
{
- as_bad (_("`%s' operand %d must use `%%es' segment"),
+ as_bad (_("`%s' operand %d must use `%ses' segment"),
i.tm.name,
- mem_op + 2);
+ mem_op + 2,
+ register_prefix);
return 0;
}
}
}
else if (i.suffix == QWORD_MNEM_SUFFIX)
{
- if (!check_qword_reg ())
+ if (intel_syntax
+ && i.tm.opcode_modifier.ignoresize
+ && i.tm.opcode_modifier.no_qsuf)
+ i.suffix = 0;
+ else if (!check_qword_reg ())
return 0;
}
else if (i.suffix == WORD_MNEM_SUFFIX)
if (!check_word_reg ())
return 0;
}
+ else if (i.suffix == XMMWORD_MNEM_SUFFIX
+ || i.suffix == YMMWORD_MNEM_SUFFIX)
+ {
+ /* Skip if the instruction has x/y suffix. match_template
+ should check if it is a valid suffix. */
+ }
else if (intel_syntax && i.tm.opcode_modifier.ignoresize)
/* Do nothing if the instruction is going to ignore the prefix. */
;
else
{
unsigned int suffixes;
-
+
suffixes = !i.tm.opcode_modifier.no_bsuf;
if (!i.tm.opcode_modifier.no_wsuf)
suffixes |= 1 << 1;
if (!i.tm.opcode_modifier.no_lsuf)
suffixes |= 1 << 2;
- if (!i.tm.opcode_modifier.no_lsuf)
+ if (!i.tm.opcode_modifier.no_ldsuf)
suffixes |= 1 << 3;
if (!i.tm.opcode_modifier.no_ssuf)
suffixes |= 1 << 4;
/* Change the opcode based on the operand size given by i.suffix;
We don't need to change things for byte insns. */
- if (i.suffix && i.suffix != BYTE_MNEM_SUFFIX)
+ if (i.suffix
+ && i.suffix != BYTE_MNEM_SUFFIX
+ && i.suffix != XMMWORD_MNEM_SUFFIX
+ && i.suffix != YMMWORD_MNEM_SUFFIX)
{
/* It's not a byte, select word/dword operation. */
if (i.tm.opcode_modifier.w)
/* Now select between word & dword operations via the operand
size prefix, except for instructions that will ignore this
prefix anyway. */
- if (i.tm.base_opcode == 0x0f01
- && (i.tm.extension_opcode == 0xc8
- || i.tm.extension_opcode == 0xd8
- || i.tm.extension_opcode == 0xda
- || i.tm.extension_opcode == 0xdb
- || i.tm.extension_opcode == 0xdf))
+ if (i.tm.opcode_modifier.addrprefixop0)
{
- /* monitor in SSE3 is a very special case. The default size
- of AX is the size of mode. The address size override
- prefix will change the size of AX. It is also true for
- invlpga, vmload, vmrun and vmsave in SVME. */
+ /* The address size override prefix changes the size of the
+ first operand. */
if ((flag_code == CODE_32BIT
&& i.op->regs[0].reg_type.bitfield.reg16)
|| (flag_code != CODE_32BIT
if (! (i.operands == 2
&& i.tm.base_opcode == 0x90
&& i.tm.extension_opcode == None
- && UINTS_EQUAL (i.types [0], acc64)
- && UINTS_EQUAL (i.types [1], acc64))
+ && operand_type_equal (&i.types [0], &acc64)
+ && operand_type_equal (&i.types [1], &acc64))
&& ! (i.operands == 1
&& i.tm.base_opcode == 0xfc7
&& i.tm.extension_opcode == 1
if (i.types[op].bitfield.reg8)
continue;
- /* movzx, movsx, pextrb and pinsrb should not generate this
- warning. */
- if (intel_syntax
- && (i.tm.base_opcode == 0xfb7
- || i.tm.base_opcode == 0xfb6
- || i.tm.base_opcode == 0x63
- || i.tm.base_opcode == 0xfbe
- || i.tm.base_opcode == 0xfbf
- || i.tm.base_opcode == 0x660f3a14
- || i.tm.base_opcode == 0x660f3a20))
+ /* Don't generate this warning if not needed. */
+ if (intel_syntax && i.tm.opcode_modifier.byteokintel)
continue;
/* crc32 doesn't generate this warning. */
|| i.types[op].bitfield.reg64
|| i.types[op].bitfield.regmmx
|| i.types[op].bitfield.regxmm
+ || i.types[op].bitfield.regymm
|| i.types[op].bitfield.sreg2
|| i.types[op].bitfield.sreg3
|| i.types[op].bitfield.control
|| i.tm.operand_types[op].bitfield.acc))
{
if (intel_syntax
- && i.tm.base_opcode == 0xf30f2d
+ && i.tm.opcode_modifier.toqword
&& !i.types[0].bitfield.regxmm)
{
- /* cvtss2si converts DWORD memory to Reg64. We want
- REX byte. */
+ /* Convert to QWORD. We want REX byte. */
i.suffix = QWORD_MNEM_SUFFIX;
}
else
/* Prohibit these changes in the 64bit mode, since the
lowering is more complicated. */
if (intel_syntax
- && i.tm.base_opcode == 0xf20f2d
+ && i.tm.opcode_modifier.todword
&& !i.types[0].bitfield.regxmm)
{
- /* cvtsd2si converts QWORD memory to Reg32. We don't want
- REX byte. */
+ /* Convert to DWORD. We don't want REX byte. */
i.suffix = LONG_MNEM_SUFFIX;
}
else
|| overlap.bitfield.imm32
|| overlap.bitfield.imm32s
|| overlap.bitfield.imm64)
- && !UINTS_EQUAL (overlap, imm8)
- && !UINTS_EQUAL (overlap, imm8s)
- && !UINTS_EQUAL (overlap, imm16)
- && !UINTS_EQUAL (overlap, imm32)
- && !UINTS_EQUAL (overlap, imm32s)
- && !UINTS_EQUAL (overlap, imm64))
+ && !operand_type_equal (&overlap, &imm8)
+ && !operand_type_equal (&overlap, &imm8s)
+ && !operand_type_equal (&overlap, &imm16)
+ && !operand_type_equal (&overlap, &imm32)
+ && !operand_type_equal (&overlap, &imm32s)
+ && !operand_type_equal (&overlap, &imm64))
{
if (i.suffix)
{
i386_operand_type temp;
- UINTS_CLEAR (temp);
- if (i.suffix == BYTE_MNEM_SUFFIX)
+ operand_type_set (&temp, 0);
+ if (i.suffix == BYTE_MNEM_SUFFIX)
{
temp.bitfield.imm8 = overlap.bitfield.imm8;
temp.bitfield.imm8s = overlap.bitfield.imm8s;
temp.bitfield.imm32 = overlap.bitfield.imm32;
overlap = temp;
}
- else if (UINTS_EQUAL (overlap, imm16_32_32s)
- || UINTS_EQUAL (overlap, imm16_32)
- || UINTS_EQUAL (overlap, imm16_32s))
+ else if (operand_type_equal (&overlap, &imm16_32_32s)
+ || operand_type_equal (&overlap, &imm16_32)
+ || operand_type_equal (&overlap, &imm16_32s))
{
- UINTS_CLEAR (overlap);
if ((flag_code == CODE_16BIT) ^ (i.prefix[DATA_PREFIX] != 0))
- overlap.bitfield.imm16 = 1;
+ overlap = imm16;
else
- overlap.bitfield.imm32s = 1;
+ overlap = imm32s;
}
- if (!UINTS_EQUAL (overlap, imm8)
- && !UINTS_EQUAL (overlap, imm8s)
- && !UINTS_EQUAL (overlap, imm16)
- && !UINTS_EQUAL (overlap, imm32)
- && !UINTS_EQUAL (overlap, imm32s)
- && !UINTS_EQUAL (overlap, imm64))
+ if (!operand_type_equal (&overlap, &imm8)
+ && !operand_type_equal (&overlap, &imm8s)
+ && !operand_type_equal (&overlap, &imm16)
+ && !operand_type_equal (&overlap, &imm32)
+ && !operand_type_equal (&overlap, &imm32s)
+ && !operand_type_equal (&overlap, &imm64))
{
as_bad (_("no instruction mnemonic suffix given; "
"can't determine immediate size"));
return 0;
i.types[2] = operand_type_and (i.types[2], i.tm.operand_types[2]);
- assert (operand_type_check (i.types[2], imm) == 0);
+ gas_assert (operand_type_check (i.types[2], imm) == 0);
return 1;
}
-static void
-process_drex (void)
-{
- i.drex.modrm_reg = None;
- i.drex.modrm_regmem = None;
-
- /* SSE5 4 operand instructions must have the destination the same as
- one of the inputs. Figure out the destination register and cache
- it away in the drex field, and remember which fields to use for
- the modrm byte. */
- if (i.tm.opcode_modifier.drex
- && i.tm.opcode_modifier.drexv
- && i.operands == 4)
- {
- i.tm.extension_opcode = None;
-
- /* Case 1: 4 operand insn, dest = src1, src3 = register. */
- if (i.types[0].bitfield.regxmm != 0
- && i.types[1].bitfield.regxmm != 0
- && i.types[2].bitfield.regxmm != 0
- && i.types[3].bitfield.regxmm != 0
- && i.op[0].regs->reg_num == i.op[3].regs->reg_num
- && i.op[0].regs->reg_flags == i.op[3].regs->reg_flags)
- {
- /* Clear the arguments that are stored in drex. */
- UINTS_CLEAR (i.types[0]);
- UINTS_CLEAR (i.types[3]);
- i.reg_operands -= 2;
-
- /* There are two different ways to encode a 4 operand
- instruction with all registers that uses OC1 set to
- 0 or 1. Favor setting OC1 to 0 since this mimics the
- actions of other SSE5 assemblers. Use modrm encoding 2
- for register/register. Include the high order bit that
- is normally stored in the REX byte in the register
- field. */
- i.tm.extension_opcode = DREX_X1_XMEM_X2_X1;
- i.drex.modrm_reg = 2;
- i.drex.modrm_regmem = 1;
- i.drex.reg = (i.op[3].regs->reg_num
- + ((i.op[3].regs->reg_flags & RegRex) ? 8 : 0));
- }
+static int
+bad_implicit_operand (int xmm)
+{
+ const char *reg = xmm ? "xmm0" : "ymm0";
+ if (intel_syntax)
+ as_bad (_("the last operand of `%s' must be `%s%s'"),
+ i.tm.name, register_prefix, reg);
+ else
+ as_bad (_("the first operand of `%s' must be `%s%s'"),
+ i.tm.name, register_prefix, reg);
+ return 0;
+}
- /* Case 2: 4 operand insn, dest = src1, src3 = memory. */
- else if (i.types[0].bitfield.regxmm != 0
- && i.types[1].bitfield.regxmm != 0
- && (i.types[2].bitfield.regxmm
- || operand_type_check (i.types[2], anymem))
- && i.types[3].bitfield.regxmm != 0
- && i.op[0].regs->reg_num == i.op[3].regs->reg_num
- && i.op[0].regs->reg_flags == i.op[3].regs->reg_flags)
- {
- /* clear the arguments that are stored in drex */
- UINTS_CLEAR (i.types[0]);
- UINTS_CLEAR (i.types[3]);
- i.reg_operands -= 2;
-
- /* Specify the modrm encoding for memory addressing. Include
- the high order bit that is normally stored in the REX byte
- in the register field. */
- i.tm.extension_opcode = DREX_X1_X2_XMEM_X1;
- i.drex.modrm_reg = 1;
- i.drex.modrm_regmem = 2;
- i.drex.reg = (i.op[3].regs->reg_num
- + ((i.op[3].regs->reg_flags & RegRex) ? 8 : 0));
- }
+static int
+process_operands (void)
+{
+ /* Default segment register this instruction will use for memory
+ accesses. 0 means unknown. This is only for optimizing out
+ unnecessary segment overrides. */
+ const seg_entry *default_seg = 0;
- /* Case 3: 4 operand insn, dest = src1, src2 = memory. */
- else if (i.types[0].bitfield.regxmm != 0
- && operand_type_check (i.types[1], anymem) != 0
- && i.types[2].bitfield.regxmm != 0
- && i.types[3].bitfield.regxmm != 0
- && i.op[0].regs->reg_num == i.op[3].regs->reg_num
- && i.op[0].regs->reg_flags == i.op[3].regs->reg_flags)
- {
- /* Clear the arguments that are stored in drex. */
- UINTS_CLEAR (i.types[0]);
- UINTS_CLEAR (i.types[3]);
- i.reg_operands -= 2;
-
- /* Specify the modrm encoding for memory addressing. Include
- the high order bit that is normally stored in the REX byte
- in the register field. */
- i.tm.extension_opcode = DREX_X1_XMEM_X2_X1;
- i.drex.modrm_reg = 2;
- i.drex.modrm_regmem = 1;
- i.drex.reg = (i.op[3].regs->reg_num
- + ((i.op[3].regs->reg_flags & RegRex) ? 8 : 0));
- }
+ if (i.tm.opcode_modifier.sse2avx
+ && (i.tm.opcode_modifier.vexnds
+ || i.tm.opcode_modifier.vexndd))
+ {
+ unsigned int dup = i.operands;
+ unsigned int dest = dup - 1;
+ unsigned int j;
- /* Case 4: 4 operand insn, dest = src3, src2 = register. */
- else if (i.types[0].bitfield.regxmm != 0
- && i.types[1].bitfield.regxmm != 0
- && i.types[2].bitfield.regxmm != 0
- && i.types[3].bitfield.regxmm != 0
- && i.op[2].regs->reg_num == i.op[3].regs->reg_num
- && i.op[2].regs->reg_flags == i.op[3].regs->reg_flags)
- {
- /* clear the arguments that are stored in drex */
- UINTS_CLEAR (i.types[2]);
- UINTS_CLEAR (i.types[3]);
- i.reg_operands -= 2;
-
- /* There are two different ways to encode a 4 operand
- instruction with all registers that uses OC1 set to
- 0 or 1. Favor setting OC1 to 0 since this mimics the
- actions of other SSE5 assemblers. Use modrm encoding
- 2 for register/register. Include the high order bit that
- is normally stored in the REX byte in the register
- field. */
- i.tm.extension_opcode = DREX_XMEM_X1_X2_X2;
- i.drex.modrm_reg = 1;
- i.drex.modrm_regmem = 0;
-
- /* Remember the register, including the upper bits */
- i.drex.reg = (i.op[3].regs->reg_num
- + ((i.op[3].regs->reg_flags & RegRex) ? 8 : 0));
- }
+ /* The destination must be an xmm register. */
+ gas_assert (i.reg_operands
+ && MAX_OPERANDS > dup
+ && operand_type_equal (&i.types[dest], ®xmm));
- /* Case 5: 4 operand insn, dest = src3, src2 = memory. */
- else if (i.types[0].bitfield.regxmm != 0
- && (i.types[1].bitfield.regxmm
- || operand_type_check (i.types[1], anymem))
- && i.types[2].bitfield.regxmm != 0
- && i.types[3].bitfield.regxmm != 0
- && i.op[2].regs->reg_num == i.op[3].regs->reg_num
- && i.op[2].regs->reg_flags == i.op[3].regs->reg_flags)
+ if (i.tm.opcode_modifier.firstxmm0)
{
- /* Clear the arguments that are stored in drex. */
- UINTS_CLEAR (i.types[2]);
- UINTS_CLEAR (i.types[3]);
- i.reg_operands -= 2;
-
- /* Specify the modrm encoding and remember the register
- including the bits normally stored in the REX byte. */
- i.tm.extension_opcode = DREX_X1_XMEM_X2_X2;
- i.drex.modrm_reg = 0;
- i.drex.modrm_regmem = 1;
- i.drex.reg = (i.op[3].regs->reg_num
- + ((i.op[3].regs->reg_flags & RegRex) ? 8 : 0));
- }
+ /* The first operand is implicit and must be xmm0. */
+ gas_assert (operand_type_equal (&i.types[0], ®xmm));
+ if (i.op[0].regs->reg_num != 0)
+ return bad_implicit_operand (1);
- /* Case 6: 4 operand insn, dest = src3, src1 = memory. */
- else if (operand_type_check (i.types[0], anymem) != 0
- && i.types[1].bitfield.regxmm != 0
- && i.types[2].bitfield.regxmm != 0
- && i.types[3].bitfield.regxmm != 0
- && i.op[2].regs->reg_num == i.op[3].regs->reg_num
- && i.op[2].regs->reg_flags == i.op[3].regs->reg_flags)
- {
- /* clear the arguments that are stored in drex */
- UINTS_CLEAR (i.types[2]);
- UINTS_CLEAR (i.types[3]);
- i.reg_operands -= 2;
-
- /* Specify the modrm encoding and remember the register
- including the bits normally stored in the REX byte. */
- i.tm.extension_opcode = DREX_XMEM_X1_X2_X2;
- i.drex.modrm_reg = 1;
- i.drex.modrm_regmem = 0;
- i.drex.reg = (i.op[3].regs->reg_num
- + ((i.op[3].regs->reg_flags & RegRex) ? 8 : 0));
+ if (i.tm.opcode_modifier.vex3sources)
+ {
+ /* Keep xmm0 for instructions with VEX prefix and 3
+ sources. */
+ goto duplicate;
+ }
+ else
+ {
+ /* We remove the first xmm0 and keep the number of
+ operands unchanged, which in fact duplicates the
+ destination. */
+ for (j = 1; j < i.operands; j++)
+ {
+ i.op[j - 1] = i.op[j];
+ i.types[j - 1] = i.types[j];
+ i.tm.operand_types[j - 1] = i.tm.operand_types[j];
+ }
+ }
}
-
- else
- as_bad (_("Incorrect operands for the '%s' instruction"),
- i.tm.name);
- }
-
- /* SSE5 instructions with the DREX byte where the only memory operand
- is in the 2nd argument, and the first and last xmm register must
- match, and is encoded in the DREX byte. */
- else if (i.tm.opcode_modifier.drex
- && !i.tm.opcode_modifier.drexv
- && i.operands == 4)
- {
- /* Case 1: 4 operand insn, dest = src1, src3 = reg/mem. */
- if (i.types[0].bitfield.regxmm != 0
- && (i.types[1].bitfield.regxmm
- || operand_type_check(i.types[1], anymem))
- && i.types[2].bitfield.regxmm != 0
- && i.types[3].bitfield.regxmm != 0
- && i.op[0].regs->reg_num == i.op[3].regs->reg_num
- && i.op[0].regs->reg_flags == i.op[3].regs->reg_flags)
+ else if (i.tm.opcode_modifier.implicit1stxmm0)
{
- /* clear the arguments that are stored in drex */
- UINTS_CLEAR (i.types[0]);
- UINTS_CLEAR (i.types[3]);
- i.reg_operands -= 2;
-
- /* Specify the modrm encoding and remember the register
- including the high bit normally stored in the REX
- byte. */
- i.drex.modrm_reg = 2;
- i.drex.modrm_regmem = 1;
- i.drex.reg = (i.op[3].regs->reg_num
- + ((i.op[3].regs->reg_flags & RegRex) ? 8 : 0));
- }
+ gas_assert ((MAX_OPERANDS - 1) > dup
+ && i.tm.opcode_modifier.vex3sources);
- else
- as_bad (_("Incorrect operands for the '%s' instruction"),
- i.tm.name);
- }
+ /* Add the implicit xmm0 for instructions with VEX prefix
+ and 3 sources. */
+ for (j = i.operands; j > 0; j--)
+ {
+ i.op[j] = i.op[j - 1];
+ i.types[j] = i.types[j - 1];
+ i.tm.operand_types[j] = i.tm.operand_types[j - 1];
+ }
+ i.op[0].regs
+ = (const reg_entry *) hash_find (reg_hash, "xmm0");
+ i.types[0] = regxmm;
+ i.tm.operand_types[0] = regxmm;
- /* SSE5 3 operand instructions that the result is a register, being
- either operand can be a memory operand, using OC0 to note which
- one is the memory. */
- else if (i.tm.opcode_modifier.drex
- && i.tm.opcode_modifier.drexv
- && i.operands == 3)
- {
- i.tm.extension_opcode = None;
+ i.operands += 2;
+ i.reg_operands += 2;
+ i.tm.operands += 2;
- /* Case 1: 3 operand insn, src1 = register. */
- if (i.types[0].bitfield.regxmm != 0
- && i.types[1].bitfield.regxmm != 0
- && i.types[2].bitfield.regxmm != 0)
- {
- /* Clear the arguments that are stored in drex. */
- UINTS_CLEAR (i.types[2]);
- i.reg_operands--;
-
- /* Specify the modrm encoding and remember the register
- including the high bit normally stored in the REX byte. */
- i.tm.extension_opcode = DREX_XMEM_X1_X2;
- i.drex.modrm_reg = 1;
- i.drex.modrm_regmem = 0;
- i.drex.reg = (i.op[2].regs->reg_num
- + ((i.op[2].regs->reg_flags & RegRex) ? 8 : 0));
+ dup++;
+ dest++;
+ i.op[dup] = i.op[dest];
+ i.types[dup] = i.types[dest];
+ i.tm.operand_types[dup] = i.tm.operand_types[dest];
}
-
- /* Case 2: 3 operand insn, src1 = memory. */
- else if (operand_type_check (i.types[0], anymem) != 0
- && i.types[1].bitfield.regxmm != 0
- && i.types[2].bitfield.regxmm != 0)
+ else
{
- /* Clear the arguments that are stored in drex. */
- UINTS_CLEAR (i.types[2]);
- i.reg_operands--;
-
- /* Specify the modrm encoding and remember the register
- including the high bit normally stored in the REX
- byte. */
- i.tm.extension_opcode = DREX_XMEM_X1_X2;
- i.drex.modrm_reg = 1;
- i.drex.modrm_regmem = 0;
- i.drex.reg = (i.op[2].regs->reg_num
- + ((i.op[2].regs->reg_flags & RegRex) ? 8 : 0));
- }
+duplicate:
+ i.operands++;
+ i.reg_operands++;
+ i.tm.operands++;
- /* Case 3: 3 operand insn, src2 = memory. */
- else if (i.types[0].bitfield.regxmm != 0
- && operand_type_check (i.types[1], anymem) != 0
- && i.types[2].bitfield.regxmm != 0)
- {
- /* Clear the arguments that are stored in drex. */
- UINTS_CLEAR (i.types[2]);
- i.reg_operands--;
-
- /* Specify the modrm encoding and remember the register
- including the high bit normally stored in the REX byte. */
- i.tm.extension_opcode = DREX_X1_XMEM_X2;
- i.drex.modrm_reg = 0;
- i.drex.modrm_regmem = 1;
- i.drex.reg = (i.op[2].regs->reg_num
- + ((i.op[2].regs->reg_flags & RegRex) ? 8 : 0));
+ i.op[dup] = i.op[dest];
+ i.types[dup] = i.types[dest];
+ i.tm.operand_types[dup] = i.tm.operand_types[dest];
}
- else
- as_bad (_("Incorrect operands for the '%s' instruction"),
- i.tm.name);
+ if (i.tm.opcode_modifier.immext)
+ process_immext ();
}
-
- /* SSE5 4 operand instructions that are the comparison instructions
- where the first operand is the immediate value of the comparison
- to be done. */
- else if (i.tm.opcode_modifier.drexc != 0 && i.operands == 4)
+ else if (i.tm.opcode_modifier.firstxmm0)
{
- /* Case 1: 4 operand insn, src1 = reg/memory. */
- if (operand_type_check (i.types[0], imm) != 0
- && (i.types[1].bitfield.regxmm
- || operand_type_check (i.types[1], anymem))
- && i.types[2].bitfield.regxmm != 0
- && i.types[3].bitfield.regxmm != 0)
- {
- /* clear the arguments that are stored in drex */
- UINTS_CLEAR (i.types[3]);
- i.reg_operands--;
-
- /* Specify the modrm encoding and remember the register
- including the high bit normally stored in the REX byte. */
- i.drex.modrm_reg = 2;
- i.drex.modrm_regmem = 1;
- i.drex.reg = (i.op[3].regs->reg_num
- + ((i.op[3].regs->reg_flags & RegRex) ? 8 : 0));
- }
+ unsigned int j;
+
+ /* The first operand is implicit and must be xmm0/ymm0. */
+ gas_assert (i.reg_operands
+ && (operand_type_equal (&i.types[0], ®xmm)
+ || operand_type_equal (&i.types[0], ®ymm)));
+ if (i.op[0].regs->reg_num != 0)
+ return bad_implicit_operand (i.types[0].bitfield.regxmm);
- /* Case 2: 3 operand insn with ImmExt that places the
- opcode_extension as an immediate argument. This is used for
- all of the varients of comparison that supplies the appropriate
- value as part of the instruction. */
- else if ((i.types[0].bitfield.regxmm
- || operand_type_check (i.types[0], anymem))
- && i.types[1].bitfield.regxmm != 0
- && i.types[2].bitfield.regxmm != 0
- && operand_type_check (i.types[3], imm) != 0)
+ for (j = 1; j < i.operands; j++)
{
- /* clear the arguments that are stored in drex */
- UINTS_CLEAR (i.types[2]);
- i.reg_operands--;
-
- /* Specify the modrm encoding and remember the register
- including the high bit normally stored in the REX byte. */
- i.drex.modrm_reg = 1;
- i.drex.modrm_regmem = 0;
- i.drex.reg = (i.op[2].regs->reg_num
- + ((i.op[2].regs->reg_flags & RegRex) ? 8 : 0));
+ i.op[j - 1] = i.op[j];
+ i.types[j - 1] = i.types[j];
+
+ /* We need to adjust fields in i.tm since they are used by
+ build_modrm_byte. */
+ i.tm.operand_types [j - 1] = i.tm.operand_types [j];
}
- else
- as_bad (_("Incorrect operands for the '%s' instruction"),
- i.tm.name);
+ i.operands--;
+ i.reg_operands--;
+ i.tm.operands--;
}
+ else if (i.tm.opcode_modifier.regkludge)
+ {
+ /* The imul $imm, %reg instruction is converted into
+ imul $imm, %reg, %reg, and the clr %reg instruction
+ is converted into xor %reg, %reg. */
- else if (i.tm.opcode_modifier.drex
- || i.tm.opcode_modifier.drexv
- || i.tm.opcode_modifier.drexc)
- as_bad (_("Internal error for the '%s' instruction"), i.tm.name);
-}
-
-static int
-process_operands (void)
-{
- /* Default segment register this instruction will use for memory
- accesses. 0 means unknown. This is only for optimizing out
- unnecessary segment overrides. */
- const seg_entry *default_seg = 0;
+ unsigned int first_reg_op;
- /* Handle all of the DREX munging that SSE5 needs. */
- if (i.tm.opcode_modifier.drex
- || i.tm.opcode_modifier.drexv
- || i.tm.opcode_modifier.drexc)
- process_drex ();
-
- /* The imul $imm, %reg instruction is converted into
- imul $imm, %reg, %reg, and the clr %reg instruction
- is converted into xor %reg, %reg. */
- if (i.tm.opcode_modifier.regkludge)
- {
- if (i.tm.cpu_flags.bitfield.cpusse4_1)
- {
- /* The first operand in instruction blendvpd, blendvps and
- pblendvb in SSE4.1 is implicit and must be xmm0. */
- assert (i.operands == 3
- && i.reg_operands >= 2
- && UINTS_EQUAL (i.types[0], regxmm));
- if (i.op[0].regs->reg_num != 0)
- {
- if (intel_syntax)
- as_bad (_("the last operand of `%s' must be `%sxmm0'"),
- i.tm.name, register_prefix);
- else
- as_bad (_("the first operand of `%s' must be `%sxmm0'"),
- i.tm.name, register_prefix);
- return 0;
- }
- i.op[0] = i.op[1];
- i.op[1] = i.op[2];
- i.types[0] = i.types[1];
- i.types[1] = i.types[2];
- i.operands--;
- i.reg_operands--;
-
- /* We need to adjust fields in i.tm since they are used by
- build_modrm_byte. */
- i.tm.operand_types [0] = i.tm.operand_types [1];
- i.tm.operand_types [1] = i.tm.operand_types [2];
- i.tm.operands--;
- }
- else
- {
- unsigned int first_reg_op;
-
- if (operand_type_check (i.types[0], reg))
- first_reg_op = 0;
- else
- first_reg_op = 1;
- /* Pretend we saw the extra register operand. */
- assert (i.reg_operands == 1
- && i.op[first_reg_op + 1].regs == 0);
- i.op[first_reg_op + 1].regs = i.op[first_reg_op].regs;
- i.types[first_reg_op + 1] = i.types[first_reg_op];
- i.operands++;
- i.reg_operands++;
- }
+ if (operand_type_check (i.types[0], reg))
+ first_reg_op = 0;
+ else
+ first_reg_op = 1;
+ /* Pretend we saw the extra register operand. */
+ gas_assert (i.reg_operands == 1
+ && i.op[first_reg_op + 1].regs == 0);
+ i.op[first_reg_op + 1].regs = i.op[first_reg_op].regs;
+ i.types[first_reg_op + 1] = i.types[first_reg_op];
+ i.operands++;
+ i.reg_operands++;
}
if (i.tm.opcode_modifier.shortform)
if (i.tm.base_opcode == POP_SEG_SHORT
&& i.op[0].regs->reg_num == 1)
{
- as_bad (_("you can't `pop %%cs'"));
+ as_bad (_("you can't `pop %scs'"), register_prefix);
return 0;
}
i.tm.base_opcode |= (i.op[0].regs->reg_num << 3);
}
else
{
- /* The register or float register operand is in operand
+ /* The register or float register operand is in operand
0 or 1. */
unsigned int op;
-
- if (i.types[0].bitfield.floatreg
- || operand_type_check (i.types[0], reg))
- op = 0;
- else
- op = 1;
+
+ if (i.types[0].bitfield.floatreg
+ || operand_type_check (i.types[0], reg))
+ op = 0;
+ else
+ op = 1;
/* Register goes in low 3 bits of opcode. */
i.tm.base_opcode |= i.op[op].regs->reg_num;
if ((i.op[op].regs->reg_flags & RegRex) != 0)
{
/* Reversed arguments on faddp, fsubp, etc. */
as_warn (_("translating to `%s %s%s,%s%s'"), i.tm.name,
- register_prefix, i.op[1].regs->reg_name,
- register_prefix, i.op[0].regs->reg_name);
+ register_prefix, i.op[!intel_syntax].regs->reg_name,
+ register_prefix, i.op[intel_syntax].regs->reg_name);
}
else
{
build_modrm_byte (void)
{
const seg_entry *default_seg = 0;
+ unsigned int source, dest;
+ int vex_3_sources;
- /* SSE5 4 operand instructions are encoded in such a way that one of
- the inputs must match the destination register. Process_drex hides
- the 3rd argument in the drex field, so that by the time we get
- here, it looks to GAS as if this is a 2 operand instruction. */
- if ((i.tm.opcode_modifier.drex
- || i.tm.opcode_modifier.drexv
- || i.tm.opcode_modifier.drexc)
- && i.reg_operands == 2)
+ /* The first operand of instructions with VEX prefix and 3 sources
+ must be VEX_Imm4. */
+ vex_3_sources = i.tm.opcode_modifier.vex3sources;
+ if (vex_3_sources)
{
- const reg_entry *reg = i.op[i.drex.modrm_reg].regs;
- const reg_entry *regmem = i.op[i.drex.modrm_regmem].regs;
+ unsigned int nds, reg;
- i.rm.reg = reg->reg_num;
- i.rm.regmem = regmem->reg_num;
- i.rm.mode = 3;
- if ((reg->reg_flags & RegRex) != 0)
- i.rex |= REX_R;
- if ((regmem->reg_flags & RegRex) != 0)
- i.rex |= REX_B;
+ if (i.tm.opcode_modifier.veximmext
+ && i.tm.opcode_modifier.immext)
+ {
+ dest = i.operands - 2;
+ gas_assert (dest == 3);
+ }
+ else
+ dest = i.operands - 1;
+ nds = dest - 1;
+
+ /* This instruction must have 4 register operands
+ or 3 register operands plus 1 memory operand.
+ It must have VexNDS and VexImmExt. */
+ gas_assert ((i.reg_operands == 4
+ || (i.reg_operands == 3 && i.mem_operands == 1))
+ && i.tm.opcode_modifier.vexnds
+ && i.tm.opcode_modifier.veximmext
+ && (operand_type_equal (&i.tm.operand_types[dest], ®xmm)
+ || operand_type_equal (&i.tm.operand_types[dest], ®ymm)));
+
+ /* Generate an 8bit immediate operand to encode the register
+ operand. */
+ expressionS *exp = &im_expressions[i.imm_operands++];
+ i.op[i.operands].imms = exp;
+ i.types[i.operands] = imm8;
+ i.operands++;
+ /* If VexW1 is set, the first operand is the source and
+ the second operand is encoded in the immediate operand. */
+ if (i.tm.opcode_modifier.vexw1)
+ {
+ source = 0;
+ reg = 1;
+ }
+ else
+ {
+ source = 1;
+ reg = 0;
+ }
+ /* FMA4 swaps REG and NDS. */
+ if (i.tm.cpu_flags.bitfield.cpufma4)
+ {
+ unsigned int tmp;
+ tmp = reg;
+ reg = nds;
+ nds = tmp;
+ }
+ gas_assert ((operand_type_equal (&i.tm.operand_types[reg], ®xmm)
+ || operand_type_equal (&i.tm.operand_types[reg],
+ ®ymm))
+ && (operand_type_equal (&i.tm.operand_types[nds], ®xmm)
+ || operand_type_equal (&i.tm.operand_types[nds],
+ ®ymm)));
+ exp->X_op = O_constant;
+ exp->X_add_number
+ = ((i.op[reg].regs->reg_num
+ + ((i.op[reg].regs->reg_flags & RegRex) ? 8 : 0)) << 4);
+ i.vex.register_specifier = i.op[nds].regs;
}
+ else
+ source = dest = 0;
/* i.reg_operands MUST be the number of real register operands;
- implicit registers do not count. */
- else if (i.reg_operands == 2)
+ implicit registers do not count. If there are 3 register
+ operands, it must be a instruction with VexNDS. For a
+ instruction with VexNDD, the destination register is encoded
+ in VEX prefix. If there are 4 register operands, it must be
+ a instruction with VEX prefix and 3 sources. */
+ if (i.mem_operands == 0
+ && ((i.reg_operands == 2
+ && !i.tm.opcode_modifier.vexndd)
+ || (i.reg_operands == 3
+ && i.tm.opcode_modifier.vexnds)
+ || (i.reg_operands == 4 && vex_3_sources)))
{
- unsigned int source, dest;
-
switch (i.operands)
{
case 2:
case 3:
/* When there are 3 operands, one of them may be immediate,
which may be the first or the last operand. Otherwise,
- the first operand must be shift count register (cl). */
- assert (i.imm_operands == 1
- || (i.imm_operands == 0
- && i.types[0].bitfield.shiftcount));
+ the first operand must be shift count register (cl) or it
+ is an instruction with VexNDS. */
+ gas_assert (i.imm_operands == 1
+ || (i.imm_operands == 0
+ && (i.tm.opcode_modifier.vexnds
+ || i.types[0].bitfield.shiftcount)));
if (operand_type_check (i.types[0], imm)
|| i.types[0].bitfield.shiftcount)
source = 1;
source = 0;
break;
case 4:
- /* When there are 4 operands, the first two must be immediate
- operands. The source operand will be the 3rd one. */
- assert (i.imm_operands == 2
- && operand_type_check (i.types[0], imm)
- && operand_type_check (i.types[1], imm));
- source = 2;
+ /* When there are 4 operands, the first two must be 8bit
+ immediate operands. The source operand will be the 3rd
+ one.
+
+ For instructions with VexNDS, if the first operand
+ an imm8, the source operand is the 2nd one. If the last
+ operand is imm8, the source operand is the first one. */
+ gas_assert ((i.imm_operands == 2
+ && i.types[0].bitfield.imm8
+ && i.types[1].bitfield.imm8)
+ || (i.tm.opcode_modifier.vexnds
+ && i.imm_operands == 1
+ && (i.types[0].bitfield.imm8
+ || i.types[i.operands - 1].bitfield.imm8)));
+ if (i.tm.opcode_modifier.vexnds)
+ {
+ if (i.types[0].bitfield.imm8)
+ source = 1;
+ else
+ source = 0;
+ }
+ else
+ source = 2;
+ break;
+ case 5:
break;
default:
abort ();
}
- dest = source + 1;
+ if (!vex_3_sources)
+ {
+ dest = source + 1;
+
+ if (i.tm.opcode_modifier.vexnds)
+ {
+ /* For instructions with VexNDS, the register-only
+ source operand must be XMM or YMM register. It is
+ encoded in VEX prefix. We need to clear RegMem bit
+ before calling operand_type_equal. */
+ i386_operand_type op = i.tm.operand_types[dest];
+ op.bitfield.regmem = 0;
+ if ((dest + 1) >= i.operands
+ || (!operand_type_equal (&op, ®xmm)
+ && !operand_type_equal (&op, ®ymm)))
+ abort ();
+ i.vex.register_specifier = i.op[dest].regs;
+ dest++;
+ }
+ }
i.rm.mode = 3;
/* One of the register operands will be encoded in the i.tm.reg
}
else
{ /* If it's not 2 reg operands... */
+ unsigned int mem;
+
if (i.mem_operands)
{
unsigned int fake_zero_displacement = 0;
unsigned int op;
- /* This has been precalculated for SSE5 instructions
- that have a DREX field earlier in process_drex. */
- if (i.tm.opcode_modifier.drex
- || i.tm.opcode_modifier.drexv
- || i.tm.opcode_modifier.drexc)
- op = i.drex.modrm_regmem;
- else
- {
- for (op = 0; op < i.operands; op++)
- if (operand_type_check (i.types[op], anymem))
- break;
- assert (op < i.operands);
- }
+ for (op = 0; op < i.operands; op++)
+ if (operand_type_check (i.types[op], anymem))
+ break;
+ gas_assert (op < i.operands);
default_seg = &ds;
}
}
/* RIP addressing for 64bit mode. */
- else if (i.base_reg->reg_num == RegRip)
+ else if (i.base_reg->reg_num == RegRip ||
+ i.base_reg->reg_num == RegEip)
{
i.rm.regmem = NO_BASE_REGISTER;
i.types[op].bitfield.disp8 = 0;
&& operand_type_check (i.types[op], disp))
{
i386_operand_type temp;
- UINTS_CLEAR (temp);
+ operand_type_set (&temp, 0);
temp.bitfield.disp8 = i.types[op].bitfield.disp8;
i.types[op] = temp;
if (i.prefix[ADDR_PREFIX] == 0)
holds the correct displacement size. */
expressionS *exp;
- assert (i.op[op].disps == 0);
+ gas_assert (i.op[op].disps == 0);
exp = &disp_expressions[i.disp_operands++];
i.op[op].disps = exp;
exp->X_op = O_constant;
exp->X_add_symbol = (symbolS *) 0;
exp->X_op_symbol = (symbolS *) 0;
}
+
+ mem = op;
}
+ else
+ mem = ~0;
/* Fill in i.rm.reg or i.rm.regmem field with register operand
(if any) based on i.tm.extension_opcode. Again, we must be
if (i.reg_operands)
{
unsigned int op;
+ unsigned int vex_reg = ~0;
+
+ for (op = 0; op < i.operands; op++)
+ if (i.types[op].bitfield.reg8
+ || i.types[op].bitfield.reg16
+ || i.types[op].bitfield.reg32
+ || i.types[op].bitfield.reg64
+ || i.types[op].bitfield.regmmx
+ || i.types[op].bitfield.regxmm
+ || i.types[op].bitfield.regymm
+ || i.types[op].bitfield.sreg2
+ || i.types[op].bitfield.sreg3
+ || i.types[op].bitfield.control
+ || i.types[op].bitfield.debug
+ || i.types[op].bitfield.test)
+ break;
- /* This has been precalculated for SSE5 instructions
- that have a DREX field earlier in process_drex. */
- if (i.tm.opcode_modifier.drex
- || i.tm.opcode_modifier.drexv
- || i.tm.opcode_modifier.drexc)
+ if (vex_3_sources)
+ op = dest;
+ else if (i.tm.opcode_modifier.vexnds)
{
- op = i.drex.modrm_reg;
- i.rm.reg = i.op[op].regs->reg_num;
- if ((i.op[op].regs->reg_flags & RegRex) != 0)
- i.rex |= REX_R;
- }
- else
- {
- for (op = 0; op < i.operands; op++)
- if (i.types[op].bitfield.reg8
- || i.types[op].bitfield.reg16
- || i.types[op].bitfield.reg32
- || i.types[op].bitfield.reg64
- || i.types[op].bitfield.regmmx
- || i.types[op].bitfield.regxmm
- || i.types[op].bitfield.sreg2
- || i.types[op].bitfield.sreg3
- || i.types[op].bitfield.control
- || i.types[op].bitfield.debug
- || i.types[op].bitfield.test)
- break;
-
- assert (op < i.operands);
+ /* For instructions with VexNDS, the register-only
+ source operand is encoded in VEX prefix. */
+ gas_assert (mem != (unsigned int) ~0);
- /* If there is an extension opcode to put here, the
- register number must be put into the regmem field. */
- if (i.tm.extension_opcode != None)
+ if (op > mem)
{
- i.rm.regmem = i.op[op].regs->reg_num;
- if ((i.op[op].regs->reg_flags & RegRex) != 0)
- i.rex |= REX_B;
+ vex_reg = op++;
+ gas_assert (op < i.operands);
}
else
{
- i.rm.reg = i.op[op].regs->reg_num;
- if ((i.op[op].regs->reg_flags & RegRex) != 0)
- i.rex |= REX_R;
+ vex_reg = op + 1;
+ gas_assert (vex_reg < i.operands);
}
}
+ else if (i.tm.opcode_modifier.vexndd)
+ {
+ /* For instructions with VexNDD, there should be
+ no memory operand and the register destination
+ is encoded in VEX prefix. */
+ gas_assert (i.mem_operands == 0
+ && (op + 2) == i.operands);
+ vex_reg = op + 1;
+ }
+ else
+ gas_assert (op < i.operands);
+
+ if (vex_reg != (unsigned int) ~0)
+ {
+ gas_assert (i.reg_operands == 2);
+
+ if (!operand_type_equal (&i.tm.operand_types[vex_reg],
+ & regxmm)
+ && !operand_type_equal (&i.tm.operand_types[vex_reg],
+ ®ymm))
+ abort ();
+ i.vex.register_specifier = i.op[vex_reg].regs;
+ }
+
+ /* If there is an extension opcode to put here, the
+ register number must be put into the regmem field. */
+ if (i.tm.extension_opcode != None)
+ {
+ i.rm.regmem = i.op[op].regs->reg_num;
+ if ((i.op[op].regs->reg_flags & RegRex) != 0)
+ i.rex |= REX_B;
+ }
+ else
+ {
+ i.rm.reg = i.op[op].regs->reg_num;
+ if ((i.op[op].regs->reg_flags & RegRex) != 0)
+ i.rex |= REX_R;
+ }
/* Now, if no memory operand has set i.rm.mode = 0, 1, 2 we
must set it to 3 to indicate this is a register operand
}
/* Fill in i.rm.reg field with extension opcode (if any). */
- if (i.tm.extension_opcode != None
- && !(i.tm.opcode_modifier.drex
- || i.tm.opcode_modifier.drexv
- || i.tm.opcode_modifier.drexc))
+ if (i.tm.extension_opcode != None)
i.rm.reg = i.tm.extension_opcode;
}
return default_seg;
/* Output normal instructions here. */
char *p;
unsigned char *q;
+ unsigned int j;
unsigned int prefix;
- switch (i.tm.opcode_length)
+ /* Since the VEX prefix contains the implicit prefix, we don't
+ need the explicit prefix. */
+ if (!i.tm.opcode_modifier.vex)
{
- case 3:
- if (i.tm.base_opcode & 0xff000000)
- {
- prefix = (i.tm.base_opcode >> 24) & 0xff;
- goto check_prefix;
- }
- break;
- case 2:
- if ((i.tm.base_opcode & 0xff0000) != 0)
+ switch (i.tm.opcode_length)
{
- prefix = (i.tm.base_opcode >> 16) & 0xff;
- if (i.tm.cpu_flags.bitfield.cpupadlock)
+ case 3:
+ if (i.tm.base_opcode & 0xff000000)
{
+ prefix = (i.tm.base_opcode >> 24) & 0xff;
+ goto check_prefix;
+ }
+ break;
+ case 2:
+ if ((i.tm.base_opcode & 0xff0000) != 0)
+ {
+ prefix = (i.tm.base_opcode >> 16) & 0xff;
+ if (i.tm.cpu_flags.bitfield.cpupadlock)
+ {
check_prefix:
- if (prefix != REPE_PREFIX_OPCODE
- || i.prefix[LOCKREP_PREFIX] != REPE_PREFIX_OPCODE)
+ if (prefix != REPE_PREFIX_OPCODE
+ || (i.prefix[LOCKREP_PREFIX]
+ != REPE_PREFIX_OPCODE))
+ add_prefix (prefix);
+ }
+ else
add_prefix (prefix);
}
- else
- add_prefix (prefix);
+ break;
+ case 1:
+ break;
+ default:
+ abort ();
}
- break;
- case 1:
- break;
- default:
- abort ();
+
+ /* The prefix bytes. */
+ for (j = ARRAY_SIZE (i.prefix), q = i.prefix; j > 0; j--, q++)
+ if (*q)
+ FRAG_APPEND_1_CHAR (*q);
}
- /* The prefix bytes. */
- for (q = i.prefix;
- q < i.prefix + sizeof (i.prefix) / sizeof (i.prefix[0]);
- q++)
+ if (i.tm.opcode_modifier.vex)
{
- if (*q)
- {
- p = frag_more (1);
- md_number_to_chars (p, (valueT) *q, 1);
- }
+ for (j = 0, q = i.prefix; j < ARRAY_SIZE (i.prefix); j++, q++)
+ if (*q)
+ switch (j)
+ {
+ case REX_PREFIX:
+ /* REX byte is encoded in VEX prefix. */
+ break;
+ case SEG_PREFIX:
+ case ADDR_PREFIX:
+ FRAG_APPEND_1_CHAR (*q);
+ break;
+ default:
+ /* There should be no other prefixes for instructions
+ with VEX prefix. */
+ abort ();
+ }
+
+ /* Now the VEX prefix. */
+ p = frag_more (i.vex.length);
+ for (j = 0; j < i.vex.length; j++)
+ p[j] = i.vex.bytes[j];
}
/* Now the opcode; be careful about word order here! */
/* Put out high byte first: can't use md_number_to_chars! */
*p++ = (i.tm.base_opcode >> 8) & 0xff;
*p = i.tm.base_opcode & 0xff;
-
- /* On SSE5, encode the OC1 bit in the DREX field if this
- encoding has multiple formats. */
- if (i.tm.opcode_modifier.drex
- && i.tm.opcode_modifier.drexv
- && DREX_OC1 (i.tm.extension_opcode))
- *p |= DREX_OC1_MASK;
}
/* Now the modrm byte and sib byte (if present). */
if (i.tm.opcode_modifier.modrm)
{
- p = frag_more (1);
- md_number_to_chars (p,
- (valueT) (i.rm.regmem << 0
- | i.rm.reg << 3
- | i.rm.mode << 6),
- 1);
+ FRAG_APPEND_1_CHAR ((i.rm.regmem << 0
+ | i.rm.reg << 3
+ | i.rm.mode << 6));
/* If i.rm.regmem == ESP (4)
&& i.rm.mode != (Register mode)
&& not 16 bit
if (i.rm.regmem == ESCAPE_TO_TWO_BYTE_ADDRESSING
&& i.rm.mode != 3
&& !(i.base_reg && i.base_reg->reg_type.bitfield.reg16))
- {
- p = frag_more (1);
- md_number_to_chars (p,
- (valueT) (i.sib.base << 0
- | i.sib.index << 3
- | i.sib.scale << 6),
- 1);
- }
- }
-
- /* Write the DREX byte if needed. */
- if (i.tm.opcode_modifier.drex || i.tm.opcode_modifier.drexc)
- {
- p = frag_more (1);
- *p = (((i.drex.reg & 0xf) << 4) | (i.drex.rex & 0x7));
-
- /* Encode the OC0 bit if this encoding has multiple
- formats. */
- if ((i.tm.opcode_modifier.drex
- || i.tm.opcode_modifier.drexv)
- && DREX_OC0 (i.tm.extension_opcode))
- *p |= DREX_OC0_MASK;
+ FRAG_APPEND_1_CHAR ((i.sib.base << 0
+ | i.sib.index << 3
+ | i.sib.scale << 6));
}
if (i.disp_operands)
int pcrel = (i.flags[n] & Operand_PCrel) != 0;
/* We can't have 8 bit displacement here. */
- assert (!i.types[n].bitfield.disp8);
+ gas_assert (!i.types[n].bitfield.disp8);
/* The PC relative address is computed relative
to the instruction boundary, so in case immediate
{
/* Only one immediate is allowed for PC
relative address. */
- assert (sz == 0);
+ gas_assert (sz == 0);
sz = imm_size (n1);
i.op[n].disps->X_add_number -= sz;
}
/* We should find the immediate. */
- assert (sz != 0);
+ gas_assert (sz != 0);
}
p = frag_more (size);
OPERAND_TYPE_NONE },
{ "DTPOFF", { BFD_RELOC_386_TLS_LDO_32,
BFD_RELOC_X86_64_DTPOFF32 },
-
+
OPERAND_TYPE_IMM32_32S_64_DISP32_64 },
{ "GOTNTPOFF",{ BFD_RELOC_386_TLS_GOTIE,
0 },
if (is_end_of_line[(unsigned char) *cp] || *cp == ',')
return NULL;
- for (j = 0; j < sizeof (gotrel) / sizeof (gotrel[0]); j++)
+ for (j = 0; j < ARRAY_SIZE (gotrel); j++)
{
int len;
void
x86_cons (expressionS *exp, int size)
{
+ intel_syntax = -intel_syntax;
+
if (size == 4 || (object_64bit && size == 8))
{
/* Handle @GOTOFF and the like in an expression. */
}
else
expression (exp);
+
+ intel_syntax = -intel_syntax;
+
+ if (intel_syntax)
+ i386_intel_simplify (exp);
}
#endif
expressionS *exp;
i386_operand_type types;
- UINTS_SET (types, ~0);
+ operand_type_set (&types, ~0);
if (i.imm_operands == MAX_IMMEDIATE_OPERANDS)
{
input_line_pointer = save_input_line_pointer;
if (gotfree_input_line)
- free (gotfree_input_line);
+ {
+ free (gotfree_input_line);
+
+ if (exp->X_op == O_constant || exp->X_op == O_register)
+ exp->X_op = O_illegal;
+ }
+
+ return i386_finalize_immediate (exp_seg, exp, types, imm_start);
+}
- if (exp->X_op == O_absent
- || exp->X_op == O_illegal
- || exp->X_op == O_big
- || (gotfree_input_line
- && (exp->X_op == O_constant
- || exp->X_op == O_register)))
+static int
+i386_finalize_immediate (segT exp_seg ATTRIBUTE_UNUSED, expressionS *exp,
+ i386_operand_type types, const char *imm_start)
+{
+ if (exp->X_op == O_absent || exp->X_op == O_illegal || exp->X_op == O_big)
{
as_bad (_("missing or invalid immediate expression `%s'"),
imm_start);
return 0;
}
- UINTS_CLEAR (bigdisp);
+ operand_type_set (&bigdisp, 0);
if ((i.types[this_operand].bitfield.jumpabsolute)
|| (!current_templates->start->opcode_modifier.jump
&& !current_templates->start->opcode_modifier.jumpdword))
#endif
input_line_pointer = save_input_line_pointer;
if (gotfree_input_line)
- free (gotfree_input_line);
- ret = 1;
+ {
+ free (gotfree_input_line);
+
+ if (exp->X_op == O_constant || exp->X_op == O_register)
+ exp->X_op = O_illegal;
+ }
+
+ ret = i386_finalize_displacement (exp_seg, exp, types, disp_start);
+
+ RESTORE_END_STRING (disp_end);
+
+ return ret;
+}
+
+static int
+i386_finalize_displacement (segT exp_seg ATTRIBUTE_UNUSED, expressionS *exp,
+ i386_operand_type types, const char *disp_start)
+{
+ i386_operand_type bigdisp;
+ int ret = 1;
/* We do this to make sure that the section symbol is in
the symbol table. We will ultimately change the relocation
else if (exp->X_op == O_absent
|| exp->X_op == O_illegal
- || exp->X_op == O_big
- || (gotfree_input_line
- && (exp->X_op == O_constant
- || exp->X_op == O_register)))
+ || exp->X_op == O_big)
{
inv_disp:
as_bad (_("missing or invalid displacement expression `%s'"),
}
#endif
- RESTORE_END_STRING (disp_end);
-
/* Check if this is a displacement only operand. */
bigdisp = i.types[this_operand];
bigdisp.bitfield.disp8 = 0;
bigdisp.bitfield.disp32 = 0;
bigdisp.bitfield.disp32s = 0;
bigdisp.bitfield.disp64 = 0;
- if (UINTS_ALL_ZERO (bigdisp))
+ if (operand_type_all_zero (&bigdisp))
i.types[this_operand] = operand_type_and (i.types[this_operand],
types);
i386_index_check (const char *operand_string)
{
int ok;
+ const char *kind = "base/index";
#if INFER_ADDR_PREFIX
int fudged = 0;
tryprefix:
#endif
ok = 1;
- if (flag_code == CODE_64BIT)
+ if (current_templates->start->opcode_modifier.isstring
+ && !current_templates->start->opcode_modifier.immext
+ && (current_templates->end[-1].opcode_modifier.isstring
+ || i.mem_operands))
{
- if ((i.base_reg
- && ((i.prefix[ADDR_PREFIX] == 0
- && !i.base_reg->reg_type.bitfield.reg64)
+ /* Memory operands of string insns are special in that they only allow
+ a single register (rDI, rSI, or rBX) as their memory address. */
+ unsigned int expected;
+
+ kind = "string address";
+
+ if (current_templates->start->opcode_modifier.w)
+ {
+ i386_operand_type type = current_templates->end[-1].operand_types[0];
+
+ if (!type.bitfield.baseindex
+ || ((!i.mem_operands != !intel_syntax)
+ && current_templates->end[-1].operand_types[1]
+ .bitfield.baseindex))
+ type = current_templates->end[-1].operand_types[1];
+ expected = type.bitfield.esseg ? 7 /* rDI */ : 6 /* rSI */;
+ }
+ else
+ expected = 3 /* rBX */;
+
+ if (!i.base_reg || i.index_reg
+ || operand_type_check (i.types[this_operand], disp))
+ ok = -1;
+ else if (!(flag_code == CODE_64BIT
+ ? i.prefix[ADDR_PREFIX]
+ ? i.base_reg->reg_type.bitfield.reg32
+ : i.base_reg->reg_type.bitfield.reg64
+ : (flag_code == CODE_16BIT) ^ !i.prefix[ADDR_PREFIX]
+ ? i.base_reg->reg_type.bitfield.reg32
+ : i.base_reg->reg_type.bitfield.reg16))
+ ok = 0;
+ else if (i.base_reg->reg_num != expected)
+ ok = -1;
+
+ if (ok < 0)
+ {
+ unsigned int j;
+
+ for (j = 0; j < i386_regtab_size; ++j)
+ if ((flag_code == CODE_64BIT
+ ? i.prefix[ADDR_PREFIX]
+ ? i386_regtab[j].reg_type.bitfield.reg32
+ : i386_regtab[j].reg_type.bitfield.reg64
+ : (flag_code == CODE_16BIT) ^ !i.prefix[ADDR_PREFIX]
+ ? i386_regtab[j].reg_type.bitfield.reg32
+ : i386_regtab[j].reg_type.bitfield.reg16)
+ && i386_regtab[j].reg_num == expected)
+ break;
+ gas_assert (j < i386_regtab_size);
+ as_warn (_("`%s' is not valid here (expected `%c%s%s%c')"),
+ operand_string,
+ intel_syntax ? '[' : '(',
+ register_prefix,
+ i386_regtab[j].reg_name,
+ intel_syntax ? ']' : ')');
+ ok = 1;
+ }
+ }
+ else if (flag_code == CODE_64BIT)
+ {
+ if ((i.base_reg
+ && ((i.prefix[ADDR_PREFIX] == 0
+ && !i.base_reg->reg_type.bitfield.reg64)
|| (i.prefix[ADDR_PREFIX]
&& !i.base_reg->reg_type.bitfield.reg32))
&& (i.index_reg
- || i.base_reg->reg_num != RegRip))
+ || i.base_reg->reg_num !=
+ (i.prefix[ADDR_PREFIX] == 0 ? RegRip : RegEip)))
|| (i.index_reg
&& (!i.index_reg->reg_type.bitfield.baseindex
|| (i.prefix[ADDR_PREFIX] == 0
if (!ok)
{
#if INFER_ADDR_PREFIX
- if (i.prefix[ADDR_PREFIX] == 0)
+ if (!i.mem_operands && !i.prefix[ADDR_PREFIX])
{
i.prefix[ADDR_PREFIX] = ADDR_PREFIX_OPCODE;
i.prefixes += 1;
goto tryprefix;
}
if (fudged)
- as_bad (_("`%s' is not a valid base/index expression"),
- operand_string);
+ as_bad (_("`%s' is not a valid %s expression"),
+ operand_string,
+ kind);
else
#endif
- as_bad (_("`%s' is not a valid %s bit base/index expression"),
+ as_bad (_("`%s' is not a valid %s-bit %s expression"),
operand_string,
- flag_code_names[flag_code]);
+ flag_code_names[i.prefix[ADDR_PREFIX]
+ ? flag_code == CODE_32BIT
+ ? CODE_16BIT
+ : CODE_32BIT
+ : flag_code],
+ kind);
}
return ok;
}
-/* Parse OPERAND_STRING into the i386_insn structure I. Returns non-zero
+/* Parse OPERAND_STRING into the i386_insn structure I. Returns zero
on error. */
static int
-i386_operand (char *operand_string)
+i386_att_operand (char *operand_string)
{
const reg_entry *r;
char *end_op;
temp.bitfield.baseindex = 0;
i.types[this_operand] = operand_type_or (i.types[this_operand],
temp);
+ i.types[this_operand].bitfield.unspecified = 0;
i.op[this_operand].regs = r;
i.reg_operands++;
}
/* Special case for (%dx) while doing input/output op. */
if (i.base_reg
- && UINTS_EQUAL (i.base_reg->reg_type, reg16_inoutportreg)
+ && operand_type_equal (&i.base_reg->reg_type,
+ ®16_inoutportreg)
&& i.index_reg == 0
&& i.log2_scale_factor == 0
&& i.seg[i.mem_operands] == 0
&& !operand_type_check (i.types[this_operand], disp))
{
- UINTS_CLEAR (i.types[this_operand]);
- i.types[this_operand].bitfield.inoutportreg = 1;
+ i.types[this_operand] = inoutportreg;
return 1;
}
if (i386_index_check (operand_string) == 0)
return 0;
+ i.types[this_operand].bitfield.mem = 1;
i.mem_operands++;
}
else
#if defined (OBJ_ELF) || defined (OBJ_MAYBE_ELF)
|| (IS_ELF
&& (S_IS_EXTERNAL (fragP->fr_symbol)
- || S_IS_WEAK (fragP->fr_symbol)))
+ || S_IS_WEAK (fragP->fr_symbol)
+ || ((symbol_get_bfdsym (fragP->fr_symbol)->flags
+ & BSF_GNU_INDIRECT_FUNCTION))))
+#endif
+#if defined (OBJ_COFF) && defined (TE_PE)
+ || (OUTPUT_FLAVOR == bfd_target_coff_flavour
+ && S_IS_WEAK (fragP->fr_symbol))
#endif
)
{
fragP->fr_fix += extension;
}
\f
-/* Size of byte displacement jmp. */
-int md_short_jump_size = 2;
-
-/* Size of dword displacement jmp. */
-int md_long_jump_size = 5;
-
-void
-md_create_short_jump (ptr, from_addr, to_addr, frag, to_symbol)
- char *ptr;
- addressT from_addr, to_addr;
- fragS *frag ATTRIBUTE_UNUSED;
- symbolS *to_symbol ATTRIBUTE_UNUSED;
-{
- offsetT offset;
-
- offset = to_addr - (from_addr + 2);
- /* Opcode for byte-disp jump. */
- md_number_to_chars (ptr, (valueT) 0xeb, 1);
- md_number_to_chars (ptr + 1, (valueT) offset, 1);
-}
-
-void
-md_create_long_jump (ptr, from_addr, to_addr, frag, to_symbol)
- char *ptr;
- addressT from_addr, to_addr;
- fragS *frag ATTRIBUTE_UNUSED;
- symbolS *to_symbol ATTRIBUTE_UNUSED;
-{
- offsetT offset;
-
- offset = to_addr - (from_addr + 5);
- md_number_to_chars (ptr, (valueT) 0xe9, 1);
- md_number_to_chars (ptr + 1, (valueT) offset, 4);
-}
-\f
/* Apply a fixup (fixS) to segment data, once it has been determined
by our caller that we have all the info we need to fix it up.
if ((sym_seg == seg
|| (symbol_section_p (fixP->fx_addsy)
&& sym_seg != absolute_section))
- && !generic_force_reloc (fixP))
+ && !TC_FORCE_RELOCATION (fixP))
{
/* Yes, we add the values in twice. This is because
bfd_install_relocation subtracts them out again. I think
value += md_pcrel_from (fixP);
#endif
}
+#if defined (OBJ_COFF) && defined (TE_PE)
+ if (fixP->fx_addsy != NULL && S_IS_WEAK (fixP->fx_addsy))
+ {
+ value -= S_GET_VALUE (fixP->fx_addsy);
+ }
+#endif
/* Fix a few things - the dynamic linker expects certain values here,
and we must not disappoint it. */
/* Are we finished with this relocation now? */
if (fixP->fx_addsy == NULL)
fixP->fx_done = 1;
+#if defined (OBJ_COFF) && defined (TE_PE)
+ else if (fixP->fx_addsy != NULL && S_IS_WEAK (fixP->fx_addsy))
+ {
+ fixP->fx_done = 0;
+ /* Remember value for tc_gen_reloc. */
+ fixP->fx_addnumber = value;
+ /* Clear out the frag for now. */
+ value = 0;
+ }
+#endif
else if (use_rela_relocations)
{
fixP->fx_no_overflow = 1;
md_number_to_chars (p, value, fixP->fx_size);
}
\f
-#define MAX_LITTLENUMS 6
-
-/* Turn the string pointed to by litP into a floating point constant
- of type TYPE, and emit the appropriate bytes. The number of
- LITTLENUMS emitted is stored in *SIZEP. An error message is
- returned, or NULL on OK. */
-
char *
-md_atof (type, litP, sizeP)
- int type;
- char *litP;
- int *sizeP;
+md_atof (int type, char *litP, int *sizeP)
{
- int prec;
- LITTLENUM_TYPE words[MAX_LITTLENUMS];
- LITTLENUM_TYPE *wordP;
- char *t;
-
- switch (type)
- {
- case 'f':
- case 'F':
- prec = 2;
- break;
-
- case 'd':
- case 'D':
- prec = 4;
- break;
-
- case 'x':
- case 'X':
- prec = 5;
- break;
-
- default:
- *sizeP = 0;
- return _("Bad call to md_atof ()");
- }
- t = atof_ieee (input_line_pointer, type, words);
- if (t)
- input_line_pointer = t;
-
- *sizeP = prec * sizeof (LITTLENUM_TYPE);
- /* This loops outputs the LITTLENUMs in REVERSE order; in accord with
- the bigendian 386. */
- for (wordP = words + prec - 1; prec--;)
- {
- md_number_to_chars (litP, (valueT) (*wordP--), sizeof (LITTLENUM_TYPE));
- litP += sizeof (LITTLENUM_TYPE);
- }
- return 0;
+ /* This outputs the LITTLENUMs in REVERSE order;
+ in accord with the bigendian 386. */
+ return ieee_md_atof (type, litP, sizeP, FALSE);
}
\f
static char output_invalid_buf[sizeof (unsigned char) * 2 + 6];
}
}
+ if (r == NULL || allow_pseudo_reg)
+ return r;
+
+ if (operand_type_all_zero (&r->reg_type))
+ return (const reg_entry *) NULL;
+
+ if ((r->reg_type.bitfield.reg32
+ || r->reg_type.bitfield.sreg3
+ || r->reg_type.bitfield.control
+ || r->reg_type.bitfield.debug
+ || r->reg_type.bitfield.test)
+ && !cpu_arch_flags.bitfield.cpui386)
+ return (const reg_entry *) NULL;
+
+ if (r->reg_type.bitfield.regmmx && !cpu_arch_flags.bitfield.cpummx)
+ return (const reg_entry *) NULL;
+
+ if (r->reg_type.bitfield.regxmm && !cpu_arch_flags.bitfield.cpusse)
+ return (const reg_entry *) NULL;
+
+ if (r->reg_type.bitfield.regymm && !cpu_arch_flags.bitfield.cpuavx)
+ return (const reg_entry *) NULL;
+
/* Don't allow fake index register unless allow_index_reg isn't 0. */
- if (r != NULL
- && !allow_index_reg
+ if (!allow_index_reg
&& (r->reg_num == RegEiz || r->reg_num == RegRiz))
return (const reg_entry *) NULL;
- if (r != NULL
- && ((r->reg_flags & (RegRex64 | RegRex))
- || r->reg_type.bitfield.reg64)
+ if (((r->reg_flags & (RegRex64 | RegRex))
+ || r->reg_type.bitfield.reg64)
&& (!cpu_arch_flags.bitfield.cpulm
- || !UINTS_EQUAL (r->reg_type, control))
+ || !operand_type_equal (&r->reg_type, &control))
&& flag_code != CODE_64BIT)
return (const reg_entry *) NULL;
+ if (r->reg_type.bitfield.sreg3 && r->reg_num == RegFlat && !intel_syntax)
+ return (const reg_entry *) NULL;
+
return r;
}
}
input_line_pointer = end;
*end = 0;
- return 0;
+ return intel_syntax ? i386_intel_parse_name (name, e) : 0;
}
void
md_operand (expressionS *e)
{
- if (*input_line_pointer == REGISTER_PREFIX)
- {
- char *end;
- const reg_entry *r = parse_real_register (input_line_pointer, &end);
+ char *end;
+ const reg_entry *r;
+ switch (*input_line_pointer)
+ {
+ case REGISTER_PREFIX:
+ r = parse_real_register (input_line_pointer, &end);
if (r)
{
e->X_op = O_register;
e->X_add_number = r - i386_regtab;
input_line_pointer = end;
}
+ break;
+
+ case '[':
+ gas_assert (intel_syntax);
+ end = input_line_pointer++;
+ expression (e);
+ if (*input_line_pointer == ']')
+ {
+ ++input_line_pointer;
+ e->X_op_symbol = make_expr_symbol (e);
+ e->X_add_symbol = NULL;
+ e->X_add_number = 0;
+ e->X_op = O_index;
+ }
+ else
+ {
+ e->X_op = O_absent;
+ input_line_pointer = end;
+ }
+ break;
}
}
#define OPTION_DIVIDE (OPTION_MD_BASE + 2)
#define OPTION_MARCH (OPTION_MD_BASE + 3)
#define OPTION_MTUNE (OPTION_MD_BASE + 4)
+#define OPTION_MMNEMONIC (OPTION_MD_BASE + 5)
+#define OPTION_MSYNTAX (OPTION_MD_BASE + 6)
+#define OPTION_MINDEX_REG (OPTION_MD_BASE + 7)
+#define OPTION_MNAKED_REG (OPTION_MD_BASE + 8)
+#define OPTION_MOLD_GCC (OPTION_MD_BASE + 9)
+#define OPTION_MSSE2AVX (OPTION_MD_BASE + 10)
+#define OPTION_MSSE_CHECK (OPTION_MD_BASE + 11)
struct option md_longopts[] =
{
{"32", no_argument, NULL, OPTION_32},
-#if defined (OBJ_ELF) || defined (OBJ_MAYBE_ELF) || defined(TE_PEP)
+#if (defined (OBJ_ELF) || defined (OBJ_MAYBE_ELF) \
+ || defined (TE_PE) || defined (TE_PEP))
{"64", no_argument, NULL, OPTION_64},
#endif
{"divide", no_argument, NULL, OPTION_DIVIDE},
{"march", required_argument, NULL, OPTION_MARCH},
{"mtune", required_argument, NULL, OPTION_MTUNE},
+ {"mmnemonic", required_argument, NULL, OPTION_MMNEMONIC},
+ {"msyntax", required_argument, NULL, OPTION_MSYNTAX},
+ {"mindex-reg", no_argument, NULL, OPTION_MINDEX_REG},
+ {"mnaked-reg", no_argument, NULL, OPTION_MNAKED_REG},
+ {"mold-gcc", no_argument, NULL, OPTION_MOLD_GCC},
+ {"msse2avx", no_argument, NULL, OPTION_MSSE2AVX},
+ {"msse-check", required_argument, NULL, OPTION_MSSE_CHECK},
{NULL, no_argument, NULL, 0}
};
size_t md_longopts_size = sizeof (md_longopts);
md_parse_option (int c, char *arg)
{
unsigned int i;
+ char *arch, *next;
switch (c)
{
.stab instead of .stab.excl. We always use .stab anyhow. */
break;
#endif
-#if defined (OBJ_ELF) || defined (OBJ_MAYBE_ELF) || defined(TE_PEP)
+#if (defined (OBJ_ELF) || defined (OBJ_MAYBE_ELF) \
+ || defined (TE_PE) || defined (TE_PEP))
case OPTION_64:
{
const char **list, **l;
break;
case OPTION_MARCH:
- if (*arg == '.')
- as_fatal (_("Invalid -march= option: `%s'"), arg);
- for (i = 0; i < ARRAY_SIZE (cpu_arch); i++)
- {
- if (strcmp (arg, cpu_arch [i].name) == 0)
+ arch = xstrdup (arg);
+ do
+ {
+ if (*arch == '.')
+ as_fatal (_("Invalid -march= option: `%s'"), arg);
+ next = strchr (arch, '+');
+ if (next)
+ *next++ = '\0';
+ for (i = 0; i < ARRAY_SIZE (cpu_arch); i++)
{
- cpu_arch_isa = cpu_arch[i].type;
- cpu_arch_isa_flags = cpu_arch[i].flags;
- if (!cpu_arch_tune_set)
+ if (strcmp (arch, cpu_arch [i].name) == 0)
+ {
+ /* Processor. */
+ cpu_arch_name = cpu_arch[i].name;
+ cpu_sub_arch_name = NULL;
+ cpu_arch_flags = cpu_arch[i].flags;
+ cpu_arch_isa = cpu_arch[i].type;
+ cpu_arch_isa_flags = cpu_arch[i].flags;
+ if (!cpu_arch_tune_set)
+ {
+ cpu_arch_tune = cpu_arch_isa;
+ cpu_arch_tune_flags = cpu_arch_isa_flags;
+ }
+ break;
+ }
+ else if (*cpu_arch [i].name == '.'
+ && strcmp (arch, cpu_arch [i].name + 1) == 0)
{
- cpu_arch_tune = cpu_arch_isa;
- cpu_arch_tune_flags = cpu_arch_isa_flags;
+ /* ISA entension. */
+ i386_cpu_flags flags;
+ flags = cpu_flags_or (cpu_arch_flags,
+ cpu_arch[i].flags);
+ if (!cpu_flags_equal (&flags, &cpu_arch_flags))
+ {
+ if (cpu_sub_arch_name)
+ {
+ char *name = cpu_sub_arch_name;
+ cpu_sub_arch_name = concat (name,
+ cpu_arch[i].name,
+ (const char *) NULL);
+ free (name);
+ }
+ else
+ cpu_sub_arch_name = xstrdup (cpu_arch[i].name);
+ cpu_arch_flags = flags;
+ }
+ break;
}
- break;
}
+
+ if (i >= ARRAY_SIZE (cpu_arch))
+ as_fatal (_("Invalid -march= option: `%s'"), arg);
+
+ arch = next;
}
- if (i >= ARRAY_SIZE (cpu_arch))
- as_fatal (_("Invalid -march= option: `%s'"), arg);
+ while (next != NULL );
break;
case OPTION_MTUNE:
as_fatal (_("Invalid -mtune= option: `%s'"), arg);
break;
+ case OPTION_MMNEMONIC:
+ if (strcasecmp (arg, "att") == 0)
+ intel_mnemonic = 0;
+ else if (strcasecmp (arg, "intel") == 0)
+ intel_mnemonic = 1;
+ else
+ as_fatal (_("Invalid -mmnemonic= option: `%s'"), arg);
+ break;
+
+ case OPTION_MSYNTAX:
+ if (strcasecmp (arg, "att") == 0)
+ intel_syntax = 0;
+ else if (strcasecmp (arg, "intel") == 0)
+ intel_syntax = 1;
+ else
+ as_fatal (_("Invalid -msyntax= option: `%s'"), arg);
+ break;
+
+ case OPTION_MINDEX_REG:
+ allow_index_reg = 1;
+ break;
+
+ case OPTION_MNAKED_REG:
+ allow_naked_reg = 1;
+ break;
+
+ case OPTION_MOLD_GCC:
+ old_gcc = 1;
+ break;
+
+ case OPTION_MSSE2AVX:
+ sse2avx = 1;
+ break;
+
+ case OPTION_MSSE_CHECK:
+ if (strcasecmp (arg, "error") == 0)
+ sse_check = sse_check_error;
+ else if (strcasecmp (arg, "warning") == 0)
+ sse_check = sse_check_warning;
+ else if (strcasecmp (arg, "none") == 0)
+ sse_check = sse_check_none;
+ else
+ as_fatal (_("Invalid -msse-check= option: `%s'"), arg);
+ break;
+
default:
return 0;
}
fprintf (stream, _("\
-s ignored\n"));
#endif
-#if defined (OBJ_ELF) || defined (OBJ_MAYBE_ELF) || defined(TE_PEP)
+#if (defined (OBJ_ELF) || defined (OBJ_MAYBE_ELF) \
+ || defined (TE_PE) || defined (TE_PEP))
fprintf (stream, _("\
--32/--64 generate 32bit/64bit code\n"));
#endif
--divide ignored\n"));
#endif
fprintf (stream, _("\
- -march=CPU/-mtune=CPU generate code/optimize for CPU, where CPU is one of:\n\
- i386, i486, pentium, pentiumpro, pentium4, nocona,\n\
- core, core2, k6, athlon, k8, generic32, generic64\n"));
-
+ -march=CPU[,+EXTENSION...]\n\
+ generate code for CPU and EXTENSION, CPU is one of:\n\
+ i8086, i186, i286, i386, i486, pentium, pentiumpro,\n\
+ pentiumii, pentiumiii, pentium4, prescott, nocona,\n\
+ core, core2, corei7, k6, k6_2, athlon, k8, amdfam10,\n\
+ generic32, generic64\n\
+ EXTENSION is combination of:\n\
+ mmx, sse, sse2, sse3, ssse3, sse4.1, sse4.2, sse4,\n\
+ avx, vmx, smx, xsave, movbe, ept, aes, pclmul, fma,\n\
+ clflush, syscall, rdtscp, 3dnow, 3dnowa, sse4a,\n\
+ svme, abm, padlock, fma4\n"));
+ fprintf (stream, _("\
+ -mtune=CPU optimize for CPU, CPU is one of:\n\
+ i8086, i186, i286, i386, i486, pentium, pentiumpro,\n\
+ pentiumii, pentiumiii, pentium4, prescott, nocona,\n\
+ core, core2, corei7, k6, k6_2, athlon, k8, amdfam10,\n\
+ generic32, generic64\n"));
+ fprintf (stream, _("\
+ -msse2avx encode SSE instructions with VEX prefix\n"));
+ fprintf (stream, _("\
+ -msse-check=[none|error|warning]\n\
+ check SSE instructions\n"));
+ fprintf (stream, _("\
+ -mmnemonic=[att|intel] use AT&T/Intel mnemonic\n"));
+ fprintf (stream, _("\
+ -msyntax=[att|intel] use AT&T/Intel syntax\n"));
+ fprintf (stream, _("\
+ -mindex-reg support pseudo index registers\n"));
+ fprintf (stream, _("\
+ -mnaked-reg don't require `%%' prefix for registers\n"));
+ fprintf (stream, _("\
+ -mold-gcc support old (<= 2.8.1) versions of gcc\n"));
}
#if ((defined (OBJ_MAYBE_COFF) && defined (OBJ_MAYBE_AOUT)) \
- || defined (OBJ_ELF) || defined (OBJ_MAYBE_ELF) || defined (TE_PEP))
+ || defined (OBJ_ELF) || defined (OBJ_MAYBE_ELF) \
+ || defined (TE_PE) || defined (TE_PEP) || defined (OBJ_MACH_O))
/* Pick the target format to use. */
if (!strcmp (default_arch, "x86_64"))
{
set_code_flag (CODE_64BIT);
- if (UINTS_ALL_ZERO (cpu_arch_isa_flags))
+ if (cpu_flags_all_zero (&cpu_arch_isa_flags))
{
cpu_arch_isa_flags.bitfield.cpui186 = 1;
cpu_arch_isa_flags.bitfield.cpui286 = 1;
cpu_arch_isa_flags.bitfield.cpui486 = 1;
cpu_arch_isa_flags.bitfield.cpui586 = 1;
cpu_arch_isa_flags.bitfield.cpui686 = 1;
- cpu_arch_isa_flags.bitfield.cpup4 = 1;
+ cpu_arch_isa_flags.bitfield.cpuclflush = 1;
cpu_arch_isa_flags.bitfield.cpummx= 1;
- cpu_arch_isa_flags.bitfield.cpummx2 = 1;
cpu_arch_isa_flags.bitfield.cpusse = 1;
cpu_arch_isa_flags.bitfield.cpusse2 = 1;
}
- if (UINTS_ALL_ZERO (cpu_arch_tune_flags))
+ if (cpu_flags_all_zero (&cpu_arch_tune_flags))
{
cpu_arch_tune_flags.bitfield.cpui186 = 1;
cpu_arch_tune_flags.bitfield.cpui286 = 1;
cpu_arch_tune_flags.bitfield.cpui486 = 1;
cpu_arch_tune_flags.bitfield.cpui586 = 1;
cpu_arch_tune_flags.bitfield.cpui686 = 1;
- cpu_arch_tune_flags.bitfield.cpup4 = 1;
+ cpu_arch_tune_flags.bitfield.cpuclflush = 1;
cpu_arch_tune_flags.bitfield.cpummx= 1;
- cpu_arch_tune_flags.bitfield.cpummx2 = 1;
cpu_arch_tune_flags.bitfield.cpusse = 1;
cpu_arch_tune_flags.bitfield.cpusse2 = 1;
}
else if (!strcmp (default_arch, "i386"))
{
set_code_flag (CODE_32BIT);
- if (UINTS_ALL_ZERO (cpu_arch_isa_flags))
+ if (cpu_flags_all_zero (&cpu_arch_isa_flags))
{
cpu_arch_isa_flags.bitfield.cpui186 = 1;
cpu_arch_isa_flags.bitfield.cpui286 = 1;
cpu_arch_isa_flags.bitfield.cpui386 = 1;
}
- if (UINTS_ALL_ZERO (cpu_arch_tune_flags))
+ if (cpu_flags_all_zero (&cpu_arch_tune_flags))
{
cpu_arch_tune_flags.bitfield.cpui186 = 1;
cpu_arch_tune_flags.bitfield.cpui286 = 1;
as_fatal (_("Unknown architecture"));
switch (OUTPUT_FLAVOR)
{
-#ifdef TE_PEP
+#if defined (TE_PE) || defined (TE_PEP)
case bfd_target_coff_flavour:
- return flag_code == CODE_64BIT ? COFF_TARGET_FORMAT : "coff-i386";
- break;
+ return flag_code == CODE_64BIT ? "pe-x86-64" : "pe-i386";
#endif
#ifdef OBJ_MAYBE_AOUT
case bfd_target_aout_flavour:
}
return flag_code == CODE_64BIT ? ELF_TARGET_FORMAT64 : ELF_TARGET_FORMAT;
}
+#endif
+#if defined (OBJ_MACH_O)
+ case bfd_target_mach_o_flavour:
+ return flag_code == CODE_64BIT ? "mach-o-x86-64" : "mach-o-i386";
#endif
default:
abort ();
vtable entry to be used in the relocation's section offset. */
if (fixp->fx_r_type == BFD_RELOC_VTABLE_ENTRY)
rel->address = fixp->fx_offset;
-
+#if defined (OBJ_COFF) && defined (TE_PE)
+ else if (fixp->fx_addsy && S_IS_WEAK (fixp->fx_addsy))
+ rel->addend = fixp->fx_addnumber - (S_GET_VALUE (fixp->fx_addsy) * 2);
+ else
+#endif
rel->addend = 0;
}
/* Use the rela in 64bit mode. */
bfd_get_reloc_code_name (code));
/* Set howto to a garbage value so that we can keep going. */
rel->howto = bfd_reloc_type_lookup (stdoutput, BFD_RELOC_32);
- assert (rel->howto != NULL);
+ gas_assert (rel->howto != NULL);
}
return rel;
}
-\f
-/* Parse operands using Intel syntax. This implements a recursive descent
- parser based on the BNF grammar published in Appendix B of the MASM 6.1
- Programmer's Guide.
-
- FIXME: We do not recognize the full operand grammar defined in the MASM
- documentation. In particular, all the structure/union and
- high-level macro operands are missing.
-
- Uppercase words are terminals, lower case words are non-terminals.
- Objects surrounded by double brackets '[[' ']]' are optional. Vertical
- bars '|' denote choices. Most grammar productions are implemented in
- functions called 'intel_<production>'.
-
- Initial production is 'expr'.
-
- addOp + | -
-
- alpha [a-zA-Z]
-
- binOp & | AND | \| | OR | ^ | XOR
-
- byteRegister AL | AH | BL | BH | CL | CH | DL | DH
-
- constant digits [[ radixOverride ]]
-
- dataType BYTE | WORD | DWORD | FWORD | QWORD | TBYTE | OWORD | XMMWORD
-
- digits decdigit
- | digits decdigit
- | digits hexdigit
-
- decdigit [0-9]
-
- e04 e04 addOp e05
- | e05
-
- e05 e05 binOp e06
- | e06
-
- e06 e06 mulOp e09
- | e09
-
- e09 OFFSET e10
- | SHORT e10
- | + e10
- | - e10
- | ~ e10
- | NOT e10
- | e09 PTR e10
- | e09 : e10
- | e10
-
- e10 e10 [ expr ]
- | e11
-
- e11 ( expr )
- | [ expr ]
- | constant
- | dataType
- | id
- | $
- | register
-
- => expr expr cmpOp e04
- | e04
+#include "tc-i386-intel.c"
- gpRegister AX | EAX | BX | EBX | CX | ECX | DX | EDX
- | BP | EBP | SP | ESP | DI | EDI | SI | ESI
-
- hexdigit a | b | c | d | e | f
- | A | B | C | D | E | F
-
- id alpha
- | id alpha
- | id decdigit
-
- mulOp * | / | % | MOD | << | SHL | >> | SHR
-
- quote " | '
-
- register specialRegister
- | gpRegister
- | byteRegister
-
- segmentRegister CS | DS | ES | FS | GS | SS
-
- specialRegister CR0 | CR2 | CR3 | CR4
- | DR0 | DR1 | DR2 | DR3 | DR6 | DR7
- | TR3 | TR4 | TR5 | TR6 | TR7
-
- We simplify the grammar in obvious places (e.g., register parsing is
- done by calling parse_register) and eliminate immediate left recursion
- to implement a recursive-descent parser.
-
- expr e04 expr'
-
- expr' cmpOp e04 expr'
- | Empty
-
- e04 e05 e04'
-
- e04' addOp e05 e04'
- | Empty
-
- e05 e06 e05'
-
- e05' binOp e06 e05'
- | Empty
-
- e06 e09 e06'
-
- e06' mulOp e09 e06'
- | Empty
-
- e09 OFFSET e10 e09'
- | SHORT e10'
- | + e10'
- | - e10'
- | ~ e10'
- | NOT e10'
- | e10 e09'
-
- e09' PTR e10 e09'
- | : e10 e09'
- | Empty
-
- e10 e11 e10'
-
- e10' [ expr ] e10'
- | Empty
-
- e11 ( expr )
- | [ expr ]
- | BYTE
- | WORD
- | DWORD
- | FWORD
- | QWORD
- | TBYTE
- | OWORD
- | XMMWORD
- | .
- | $
- | register
- | id
- | constant */
-
-/* Parsing structure for the intel syntax parser. Used to implement the
- semantic actions for the operand grammar. */
-struct intel_parser_s
- {
- char *op_string; /* The string being parsed. */
- int got_a_float; /* Whether the operand is a float. */
- int op_modifier; /* Operand modifier. */
- int is_mem; /* 1 if operand is memory reference. */
- int in_offset; /* >=1 if parsing operand of offset. */
- int in_bracket; /* >=1 if parsing operand in brackets. */
- const reg_entry *reg; /* Last register reference found. */
- char *disp; /* Displacement string being built. */
- char *next_operand; /* Resume point when splitting operands. */
- };
-
-static struct intel_parser_s intel_parser;
-
-/* Token structure for parsing intel syntax. */
-struct intel_token
- {
- int code; /* Token code. */
- const reg_entry *reg; /* Register entry for register tokens. */
- char *str; /* String representation. */
- };
-
-static struct intel_token cur_token, prev_token;
-
-/* Token codes for the intel parser. Since T_SHORT is already used
- by COFF, undefine it first to prevent a warning. */
-#define T_NIL -1
-#define T_CONST 1
-#define T_REG 2
-#define T_BYTE 3
-#define T_WORD 4
-#define T_DWORD 5
-#define T_FWORD 6
-#define T_QWORD 7
-#define T_TBYTE 8
-#define T_XMMWORD 9
-#undef T_SHORT
-#define T_SHORT 10
-#define T_OFFSET 11
-#define T_PTR 12
-#define T_ID 13
-#define T_SHL 14
-#define T_SHR 15
-
-/* Prototypes for intel parser functions. */
-static int intel_match_token (int);
-static void intel_putback_token (void);
-static void intel_get_token (void);
-static int intel_expr (void);
-static int intel_e04 (void);
-static int intel_e05 (void);
-static int intel_e06 (void);
-static int intel_e09 (void);
-static int intel_e10 (void);
-static int intel_e11 (void);
-
-static int
-i386_intel_operand (char *operand_string, int got_a_float)
+void
+tc_x86_parse_to_dw2regnum (expressionS *exp)
{
- int ret;
- char *p;
+ int saved_naked_reg;
+ char saved_register_dot;
- p = intel_parser.op_string = xstrdup (operand_string);
- intel_parser.disp = (char *) xmalloc (strlen (operand_string) + 1);
+ saved_naked_reg = allow_naked_reg;
+ allow_naked_reg = 1;
+ saved_register_dot = register_chars['.'];
+ register_chars['.'] = '.';
+ allow_pseudo_reg = 1;
+ expression_and_evaluate (exp);
+ allow_pseudo_reg = 0;
+ register_chars['.'] = saved_register_dot;
+ allow_naked_reg = saved_naked_reg;
- for (;;)
+ if (exp->X_op == O_register && exp->X_add_number >= 0)
{
- /* Initialize token holders. */
- cur_token.code = prev_token.code = T_NIL;
- cur_token.reg = prev_token.reg = NULL;
- cur_token.str = prev_token.str = NULL;
-
- /* Initialize parser structure. */
- intel_parser.got_a_float = got_a_float;
- intel_parser.op_modifier = 0;
- intel_parser.is_mem = 0;
- intel_parser.in_offset = 0;
- intel_parser.in_bracket = 0;
- intel_parser.reg = NULL;
- intel_parser.disp[0] = '\0';
- intel_parser.next_operand = NULL;
-
- /* Read the first token and start the parser. */
- intel_get_token ();
- ret = intel_expr ();
-
- if (!ret)
- break;
-
- if (cur_token.code != T_NIL)
+ if ((addressT) exp->X_add_number < i386_regtab_size)
{
- as_bad (_("invalid operand for '%s' ('%s' unexpected)"),
- current_templates->start->name, cur_token.str);
- ret = 0;
+ exp->X_op = O_constant;
+ exp->X_add_number = i386_regtab[exp->X_add_number]
+ .dw2_regnum[flag_code >> 1];
}
- /* If we found a memory reference, hand it over to i386_displacement
- to fill in the rest of the operand fields. */
- else if (intel_parser.is_mem)
- {
- if ((i.mem_operands == 1
- && !current_templates->start->opcode_modifier.isstring)
- || i.mem_operands == 2)
- {
- as_bad (_("too many memory references for '%s'"),
- current_templates->start->name);
- ret = 0;
- }
- else
- {
- char *s = intel_parser.disp;
- i.mem_operands++;
-
- if (!quiet_warnings && intel_parser.is_mem < 0)
- /* See the comments in intel_bracket_expr. */
- as_warn (_("Treating `%s' as memory reference"), operand_string);
-
- /* Add the displacement expression. */
- if (*s != '\0')
- ret = i386_displacement (s, s + strlen (s));
- if (ret)
- {
- /* Swap base and index in 16-bit memory operands like
- [si+bx]. Since i386_index_check is also used in AT&T
- mode we have to do that here. */
- if (i.base_reg
- && i.index_reg
- && i.base_reg->reg_type.bitfield.reg16
- && i.index_reg->reg_type.bitfield.reg16
- && i.base_reg->reg_num >= 6
- && i.index_reg->reg_num < 6)
- {
- const reg_entry *base = i.index_reg;
+ else
+ exp->X_op = O_illegal;
+ }
+}
- i.index_reg = i.base_reg;
- i.base_reg = base;
- }
- ret = i386_index_check (operand_string);
- }
- }
- }
+void
+tc_x86_frame_initial_instructions (void)
+{
+ static unsigned int sp_regno[2];
- /* Constant and OFFSET expressions are handled by i386_immediate. */
- else if ((intel_parser.op_modifier & (1 << T_OFFSET))
- || intel_parser.reg == NULL)
- ret = i386_immediate (intel_parser.disp);
+ if (!sp_regno[flag_code >> 1])
+ {
+ char *saved_input = input_line_pointer;
+ char sp[][4] = {"esp", "rsp"};
+ expressionS exp;
- if (intel_parser.next_operand && this_operand >= MAX_OPERANDS - 1)
- ret = 0;
- if (!ret || !intel_parser.next_operand)
- break;
- intel_parser.op_string = intel_parser.next_operand;
- this_operand = i.operands++;
+ input_line_pointer = sp[flag_code >> 1];
+ tc_x86_parse_to_dw2regnum (&exp);
+ gas_assert (exp.X_op == O_constant);
+ sp_regno[flag_code >> 1] = exp.X_add_number;
+ input_line_pointer = saved_input;
}
- free (p);
- free (intel_parser.disp);
-
- return ret;
+ cfi_add_CFA_def_cfa (sp_regno[flag_code >> 1], -x86_cie_data_alignment);
+ cfi_add_CFA_offset (x86_dwarf2_return_column, x86_cie_data_alignment);
}
-#define NUM_ADDRESS_REGS (!!i.base_reg + !!i.index_reg)
+int
+i386_elf_section_type (const char *str, size_t len)
+{
+ if (flag_code == CODE_64BIT
+ && len == sizeof ("unwind") - 1
+ && strncmp (str, "unwind", 6) == 0)
+ return SHT_X86_64_UNWIND;
-/* expr e04 expr'
+ return -1;
+}
- expr' cmpOp e04 expr'
- | Empty */
-static int
-intel_expr (void)
+#ifdef TE_SOLARIS
+void
+i386_solaris_fix_up_eh_frame (segT sec)
{
- /* XXX Implement the comparison operators. */
- return intel_e04 ();
+ if (flag_code == CODE_64BIT)
+ elf_section_type (sec) = SHT_X86_64_UNWIND;
}
+#endif
-/* e04 e05 e04'
-
- e04' addOp e05 e04'
- | Empty */
-static int
-intel_e04 (void)
+#ifdef TE_PE
+void
+tc_pe_dwarf2_emit_offset (symbolS *symbol, unsigned int size)
{
- int nregs = -1;
-
- for (;;)
- {
- if (!intel_e05())
- return 0;
-
- if (nregs >= 0 && NUM_ADDRESS_REGS > nregs)
- i.base_reg = i386_regtab + REGNAM_AL; /* al is invalid as base */
-
- if (cur_token.code == '+')
- nregs = -1;
- else if (cur_token.code == '-')
- nregs = NUM_ADDRESS_REGS;
- else
- return 1;
+ expressionS expr;
- strcat (intel_parser.disp, cur_token.str);
- intel_match_token (cur_token.code);
- }
+ expr.X_op = O_secrel;
+ expr.X_add_symbol = symbol;
+ expr.X_add_number = 0;
+ emit_expr (&expr, size);
}
-
-/* e05 e06 e05'
-
- e05' binOp e06 e05'
- | Empty */
-static int
-intel_e05 (void)
-{
- int nregs = ~NUM_ADDRESS_REGS;
-
- for (;;)
- {
- if (!intel_e06())
- return 0;
-
- if (cur_token.code == '&'
- || cur_token.code == '|'
- || cur_token.code == '^')
- {
- char str[2];
-
- str[0] = cur_token.code;
- str[1] = 0;
- strcat (intel_parser.disp, str);
- }
- else
- break;
-
- intel_match_token (cur_token.code);
-
- if (nregs < 0)
- nregs = ~nregs;
- }
- if (nregs >= 0 && NUM_ADDRESS_REGS > nregs)
- i.base_reg = i386_regtab + REGNAM_AL + 1; /* cl is invalid as base */
- return 1;
-}
-
-/* e06 e09 e06'
-
- e06' mulOp e09 e06'
- | Empty */
-static int
-intel_e06 (void)
-{
- int nregs = ~NUM_ADDRESS_REGS;
-
- for (;;)
- {
- if (!intel_e09())
- return 0;
-
- if (cur_token.code == '*'
- || cur_token.code == '/'
- || cur_token.code == '%')
- {
- char str[2];
-
- str[0] = cur_token.code;
- str[1] = 0;
- strcat (intel_parser.disp, str);
- }
- else if (cur_token.code == T_SHL)
- strcat (intel_parser.disp, "<<");
- else if (cur_token.code == T_SHR)
- strcat (intel_parser.disp, ">>");
- else
- break;
-
- intel_match_token (cur_token.code);
-
- if (nregs < 0)
- nregs = ~nregs;
- }
- if (nregs >= 0 && NUM_ADDRESS_REGS > nregs)
- i.base_reg = i386_regtab + REGNAM_AL + 2; /* dl is invalid as base */
- return 1;
-}
-
-/* e09 OFFSET e09
- | SHORT e09
- | + e09
- | - e09
- | ~ e09
- | NOT e09
- | e10 e09'
-
- e09' PTR e10 e09'
- | : e10 e09'
- | Empty */
-static int
-intel_e09 (void)
-{
- int nregs = ~NUM_ADDRESS_REGS;
- int in_offset = 0;
-
- for (;;)
- {
- /* Don't consume constants here. */
- if (cur_token.code == '+' || cur_token.code == '-')
- {
- /* Need to look one token ahead - if the next token
- is a constant, the current token is its sign. */
- int next_code;
-
- intel_match_token (cur_token.code);
- next_code = cur_token.code;
- intel_putback_token ();
- if (next_code == T_CONST)
- break;
- }
-
- /* e09 OFFSET e09 */
- if (cur_token.code == T_OFFSET)
- {
- if (!in_offset++)
- ++intel_parser.in_offset;
- }
-
- /* e09 SHORT e09 */
- else if (cur_token.code == T_SHORT)
- intel_parser.op_modifier |= 1 << T_SHORT;
-
- /* e09 + e09 */
- else if (cur_token.code == '+')
- strcat (intel_parser.disp, "+");
-
- /* e09 - e09
- | ~ e09
- | NOT e09 */
- else if (cur_token.code == '-' || cur_token.code == '~')
- {
- char str[2];
-
- if (nregs < 0)
- nregs = ~nregs;
- str[0] = cur_token.code;
- str[1] = 0;
- strcat (intel_parser.disp, str);
- }
-
- /* e09 e10 e09' */
- else
- break;
-
- intel_match_token (cur_token.code);
- }
-
- for (;;)
- {
- if (!intel_e10 ())
- return 0;
-
- /* e09' PTR e10 e09' */
- if (cur_token.code == T_PTR)
- {
- char suffix;
-
- if (prev_token.code == T_BYTE)
- suffix = BYTE_MNEM_SUFFIX;
-
- else if (prev_token.code == T_WORD)
- {
- if (current_templates->start->name[0] == 'l'
- && current_templates->start->name[2] == 's'
- && current_templates->start->name[3] == 0)
- suffix = BYTE_MNEM_SUFFIX; /* so it will cause an error */
- else if (intel_parser.got_a_float == 2) /* "fi..." */
- suffix = SHORT_MNEM_SUFFIX;
- else
- suffix = WORD_MNEM_SUFFIX;
- }
-
- else if (prev_token.code == T_DWORD)
- {
- if (current_templates->start->name[0] == 'l'
- && current_templates->start->name[2] == 's'
- && current_templates->start->name[3] == 0)
- suffix = WORD_MNEM_SUFFIX;
- else if (flag_code == CODE_16BIT
- && (current_templates->start->opcode_modifier.jump
- || current_templates->start->opcode_modifier.jumpdword))
- suffix = LONG_DOUBLE_MNEM_SUFFIX;
- else if (intel_parser.got_a_float == 1) /* "f..." */
- suffix = SHORT_MNEM_SUFFIX;
- else
- suffix = LONG_MNEM_SUFFIX;
- }
-
- else if (prev_token.code == T_FWORD)
- {
- if (current_templates->start->name[0] == 'l'
- && current_templates->start->name[2] == 's'
- && current_templates->start->name[3] == 0)
- suffix = LONG_MNEM_SUFFIX;
- else if (!intel_parser.got_a_float)
- {
- if (flag_code == CODE_16BIT)
- add_prefix (DATA_PREFIX_OPCODE);
- suffix = LONG_DOUBLE_MNEM_SUFFIX;
- }
- else
- suffix = BYTE_MNEM_SUFFIX; /* so it will cause an error */
- }
-
- else if (prev_token.code == T_QWORD)
- {
- if (intel_parser.got_a_float == 1) /* "f..." */
- suffix = LONG_MNEM_SUFFIX;
- else
- suffix = QWORD_MNEM_SUFFIX;
- }
-
- else if (prev_token.code == T_TBYTE)
- {
- if (intel_parser.got_a_float == 1)
- suffix = LONG_DOUBLE_MNEM_SUFFIX;
- else
- suffix = BYTE_MNEM_SUFFIX; /* so it will cause an error */
- }
-
- else if (prev_token.code == T_XMMWORD)
- {
- /* XXX ignored for now, but accepted since gcc uses it */
- suffix = 0;
- }
-
- else
- {
- as_bad (_("Unknown operand modifier `%s'"), prev_token.str);
- return 0;
- }
-
- /* Operands for jump/call using 'ptr' notation denote absolute
- addresses. */
- if (current_templates->start->opcode_modifier.jump
- || current_templates->start->opcode_modifier.jumpdword)
- i.types[this_operand].bitfield.jumpabsolute = 1;
-
- if (current_templates->start->base_opcode == 0x8d /* lea */)
- ;
- else if (!i.suffix)
- i.suffix = suffix;
- else if (i.suffix != suffix)
- {
- as_bad (_("Conflicting operand modifiers"));
- return 0;
- }
-
- }
-
- /* e09' : e10 e09' */
- else if (cur_token.code == ':')
- {
- if (prev_token.code != T_REG)
- {
- /* While {call,jmp} SSSS:OOOO is MASM syntax only when SSSS is a
- segment/group identifier (which we don't have), using comma
- as the operand separator there is even less consistent, since
- there all branches only have a single operand. */
- if (this_operand != 0
- || intel_parser.in_offset
- || intel_parser.in_bracket
- || (!current_templates->start->opcode_modifier.jump
- && !current_templates->start->opcode_modifier.jumpdword
- && !current_templates->start->opcode_modifier.jumpintersegment
- && !current_templates->start->operand_types[0].bitfield.jumpabsolute))
- return intel_match_token (T_NIL);
- /* Remember the start of the 2nd operand and terminate 1st
- operand here.
- XXX This isn't right, yet (when SSSS:OOOO is right operand of
- another expression), but it gets at least the simplest case
- (a plain number or symbol on the left side) right. */
- intel_parser.next_operand = intel_parser.op_string;
- *--intel_parser.op_string = '\0';
- return intel_match_token (':');
- }
- }
-
- /* e09' Empty */
- else
- break;
-
- intel_match_token (cur_token.code);
-
- }
-
- if (in_offset)
- {
- --intel_parser.in_offset;
- if (nregs < 0)
- nregs = ~nregs;
- if (NUM_ADDRESS_REGS > nregs)
- {
- as_bad (_("Invalid operand to `OFFSET'"));
- return 0;
- }
- intel_parser.op_modifier |= 1 << T_OFFSET;
- }
-
- if (nregs >= 0 && NUM_ADDRESS_REGS > nregs)
- i.base_reg = i386_regtab + REGNAM_AL + 3; /* bl is invalid as base */
- return 1;
-}
-
-static int
-intel_bracket_expr (void)
-{
- int was_offset = intel_parser.op_modifier & (1 << T_OFFSET);
- const char *start = intel_parser.op_string;
- int len;
-
- if (i.op[this_operand].regs)
- return intel_match_token (T_NIL);
-
- intel_match_token ('[');
-
- /* Mark as a memory operand only if it's not already known to be an
- offset expression. If it's an offset expression, we need to keep
- the brace in. */
- if (!intel_parser.in_offset)
- {
- ++intel_parser.in_bracket;
-
- /* Operands for jump/call inside brackets denote absolute addresses. */
- if (current_templates->start->opcode_modifier.jump
- || current_templates->start->opcode_modifier.jumpdword)
- i.types[this_operand].bitfield.jumpabsolute = 1;
-
- /* Unfortunately gas always diverged from MASM in a respect that can't
- be easily fixed without risking to break code sequences likely to be
- encountered (the testsuite even check for this): MASM doesn't consider
- an expression inside brackets unconditionally as a memory reference.
- When that is e.g. a constant, an offset expression, or the sum of the
- two, this is still taken as a constant load. gas, however, always
- treated these as memory references. As a compromise, we'll try to make
- offset expressions inside brackets work the MASM way (since that's
- less likely to be found in real world code), but make constants alone
- continue to work the traditional gas way. In either case, issue a
- warning. */
- intel_parser.op_modifier &= ~was_offset;
- }
- else
- strcat (intel_parser.disp, "[");
-
- /* Add a '+' to the displacement string if necessary. */
- if (*intel_parser.disp != '\0'
- && *(intel_parser.disp + strlen (intel_parser.disp) - 1) != '+')
- strcat (intel_parser.disp, "+");
-
- if (intel_expr ()
- && (len = intel_parser.op_string - start - 1,
- intel_match_token (']')))
- {
- /* Preserve brackets when the operand is an offset expression. */
- if (intel_parser.in_offset)
- strcat (intel_parser.disp, "]");
- else
- {
- --intel_parser.in_bracket;
- if (i.base_reg || i.index_reg)
- intel_parser.is_mem = 1;
- if (!intel_parser.is_mem)
- {
- if (!(intel_parser.op_modifier & (1 << T_OFFSET)))
- /* Defer the warning until all of the operand was parsed. */
- intel_parser.is_mem = -1;
- else if (!quiet_warnings)
- as_warn (_("`[%.*s]' taken to mean just `%.*s'"),
- len, start, len, start);
- }
- }
- intel_parser.op_modifier |= was_offset;
-
- return 1;
- }
- return 0;
-}
-
-/* e10 e11 e10'
-
- e10' [ expr ] e10'
- | Empty */
-static int
-intel_e10 (void)
-{
- if (!intel_e11 ())
- return 0;
-
- while (cur_token.code == '[')
- {
- if (!intel_bracket_expr ())
- return 0;
- }
-
- return 1;
-}
-
-/* e11 ( expr )
- | [ expr ]
- | BYTE
- | WORD
- | DWORD
- | FWORD
- | QWORD
- | TBYTE
- | OWORD
- | XMMWORD
- | $
- | .
- | register
- | id
- | constant */
-static int
-intel_e11 (void)
-{
- switch (cur_token.code)
- {
- /* e11 ( expr ) */
- case '(':
- intel_match_token ('(');
- strcat (intel_parser.disp, "(");
-
- if (intel_expr () && intel_match_token (')'))
- {
- strcat (intel_parser.disp, ")");
- return 1;
- }
- return 0;
-
- /* e11 [ expr ] */
- case '[':
- return intel_bracket_expr ();
-
- /* e11 $
- | . */
- case '.':
- strcat (intel_parser.disp, cur_token.str);
- intel_match_token (cur_token.code);
-
- /* Mark as a memory operand only if it's not already known to be an
- offset expression. */
- if (!intel_parser.in_offset)
- intel_parser.is_mem = 1;
-
- return 1;
-
- /* e11 register */
- case T_REG:
- {
- const reg_entry *reg = intel_parser.reg = cur_token.reg;
-
- intel_match_token (T_REG);
-
- /* Check for segment change. */
- if (cur_token.code == ':')
- {
- if (!reg->reg_type.bitfield.sreg2
- && !reg->reg_type.bitfield.sreg3)
- {
- as_bad (_("`%s' is not a valid segment register"),
- reg->reg_name);
- return 0;
- }
- else if (i.seg[i.mem_operands])
- as_warn (_("Extra segment override ignored"));
- else
- {
- if (!intel_parser.in_offset)
- intel_parser.is_mem = 1;
- switch (reg->reg_num)
- {
- case 0:
- i.seg[i.mem_operands] = &es;
- break;
- case 1:
- i.seg[i.mem_operands] = &cs;
- break;
- case 2:
- i.seg[i.mem_operands] = &ss;
- break;
- case 3:
- i.seg[i.mem_operands] = &ds;
- break;
- case 4:
- i.seg[i.mem_operands] = &fs;
- break;
- case 5:
- i.seg[i.mem_operands] = &gs;
- break;
- }
- }
- }
-
- /* Not a segment register. Check for register scaling. */
- else if (cur_token.code == '*')
- {
- if (!intel_parser.in_bracket)
- {
- as_bad (_("Register scaling only allowed in memory operands"));
- return 0;
- }
-
- if (reg->reg_type.bitfield.reg16) /* Disallow things like [si*1]. */
- reg = i386_regtab + REGNAM_AX + 4; /* sp is invalid as index */
- else if (i.index_reg)
- reg = i386_regtab + REGNAM_EAX + 4; /* esp is invalid as index */
-
- /* What follows must be a valid scale. */
- intel_match_token ('*');
- i.index_reg = reg;
- i.types[this_operand].bitfield.baseindex = 1;
-
- /* Set the scale after setting the register (otherwise,
- i386_scale will complain) */
- if (cur_token.code == '+' || cur_token.code == '-')
- {
- char *str, sign = cur_token.code;
- intel_match_token (cur_token.code);
- if (cur_token.code != T_CONST)
- {
- as_bad (_("Syntax error: Expecting a constant, got `%s'"),
- cur_token.str);
- return 0;
- }
- str = (char *) xmalloc (strlen (cur_token.str) + 2);
- strcpy (str + 1, cur_token.str);
- *str = sign;
- if (!i386_scale (str))
- return 0;
- free (str);
- }
- else if (!i386_scale (cur_token.str))
- return 0;
- intel_match_token (cur_token.code);
- }
-
- /* No scaling. If this is a memory operand, the register is either a
- base register (first occurrence) or an index register (second
- occurrence). */
- else if (intel_parser.in_bracket)
- {
-
- if (!i.base_reg)
- i.base_reg = reg;
- else if (!i.index_reg)
- i.index_reg = reg;
- else
- {
- as_bad (_("Too many register references in memory operand"));
- return 0;
- }
-
- i.types[this_operand].bitfield.baseindex = 1;
- }
-
- /* It's neither base nor index. */
- else if (!intel_parser.in_offset && !intel_parser.is_mem)
- {
- i386_operand_type temp = reg->reg_type;
- temp.bitfield.baseindex = 0;
- i.types[this_operand] = operand_type_or (i.types[this_operand],
- temp);
- i.op[this_operand].regs = reg;
- i.reg_operands++;
- }
- else
- {
- as_bad (_("Invalid use of register"));
- return 0;
- }
-
- /* Since registers are not part of the displacement string (except
- when we're parsing offset operands), we may need to remove any
- preceding '+' from the displacement string. */
- if (*intel_parser.disp != '\0'
- && !intel_parser.in_offset)
- {
- char *s = intel_parser.disp;
- s += strlen (s) - 1;
- if (*s == '+')
- *s = '\0';
- }
-
- return 1;
- }
-
- /* e11 BYTE
- | WORD
- | DWORD
- | FWORD
- | QWORD
- | TBYTE
- | OWORD
- | XMMWORD */
- case T_BYTE:
- case T_WORD:
- case T_DWORD:
- case T_FWORD:
- case T_QWORD:
- case T_TBYTE:
- case T_XMMWORD:
- intel_match_token (cur_token.code);
-
- if (cur_token.code == T_PTR)
- return 1;
-
- /* It must have been an identifier. */
- intel_putback_token ();
- cur_token.code = T_ID;
- /* FALLTHRU */
-
- /* e11 id
- | constant */
- case T_ID:
- if (!intel_parser.in_offset && intel_parser.is_mem <= 0)
- {
- symbolS *symbolP;
-
- /* The identifier represents a memory reference only if it's not
- preceded by an offset modifier and if it's not an equate. */
- symbolP = symbol_find(cur_token.str);
- if (!symbolP || S_GET_SEGMENT(symbolP) != absolute_section)
- intel_parser.is_mem = 1;
- }
- /* FALLTHRU */
-
- case T_CONST:
- case '-':
- case '+':
- {
- char *save_str, sign = 0;
-
- /* Allow constants that start with `+' or `-'. */
- if (cur_token.code == '-' || cur_token.code == '+')
- {
- sign = cur_token.code;
- intel_match_token (cur_token.code);
- if (cur_token.code != T_CONST)
- {
- as_bad (_("Syntax error: Expecting a constant, got `%s'"),
- cur_token.str);
- return 0;
- }
- }
-
- save_str = (char *) xmalloc (strlen (cur_token.str) + 2);
- strcpy (save_str + !!sign, cur_token.str);
- if (sign)
- *save_str = sign;
-
- /* Get the next token to check for register scaling. */
- intel_match_token (cur_token.code);
-
- /* Check if this constant is a scaling factor for an
- index register. */
- if (cur_token.code == '*')
- {
- if (intel_match_token ('*') && cur_token.code == T_REG)
- {
- const reg_entry *reg = cur_token.reg;
-
- if (!intel_parser.in_bracket)
- {
- as_bad (_("Register scaling only allowed "
- "in memory operands"));
- return 0;
- }
-
- /* Disallow things like [1*si].
- sp and esp are invalid as index. */
- if (reg->reg_type.bitfield.reg16)
- reg = i386_regtab + REGNAM_AX + 4;
- else if (i.index_reg)
- reg = i386_regtab + REGNAM_EAX + 4;
-
- /* The constant is followed by `* reg', so it must be
- a valid scale. */
- i.index_reg = reg;
- i.types[this_operand].bitfield.baseindex = 1;
-
- /* Set the scale after setting the register (otherwise,
- i386_scale will complain) */
- if (!i386_scale (save_str))
- return 0;
- intel_match_token (T_REG);
-
- /* Since registers are not part of the displacement
- string, we may need to remove any preceding '+' from
- the displacement string. */
- if (*intel_parser.disp != '\0')
- {
- char *s = intel_parser.disp;
- s += strlen (s) - 1;
- if (*s == '+')
- *s = '\0';
- }
-
- free (save_str);
-
- return 1;
- }
-
- /* The constant was not used for register scaling. Since we have
- already consumed the token following `*' we now need to put it
- back in the stream. */
- intel_putback_token ();
- }
-
- /* Add the constant to the displacement string. */
- strcat (intel_parser.disp, save_str);
- free (save_str);
-
- return 1;
- }
- }
-
- as_bad (_("Unrecognized token '%s'"), cur_token.str);
- return 0;
-}
-
-/* Match the given token against cur_token. If they match, read the next
- token from the operand string. */
-static int
-intel_match_token (int code)
-{
- if (cur_token.code == code)
- {
- intel_get_token ();
- return 1;
- }
- else
- {
- as_bad (_("Unexpected token `%s'"), cur_token.str);
- return 0;
- }
-}
-
-/* Read a new token from intel_parser.op_string and store it in cur_token. */
-static void
-intel_get_token (void)
-{
- char *end_op;
- const reg_entry *reg;
- struct intel_token new_token;
-
- new_token.code = T_NIL;
- new_token.reg = NULL;
- new_token.str = NULL;
-
- /* Free the memory allocated to the previous token and move
- cur_token to prev_token. */
- if (prev_token.str)
- free (prev_token.str);
-
- prev_token = cur_token;
-
- /* Skip whitespace. */
- while (is_space_char (*intel_parser.op_string))
- intel_parser.op_string++;
-
- /* Return an empty token if we find nothing else on the line. */
- if (*intel_parser.op_string == '\0')
- {
- cur_token = new_token;
- return;
- }
-
- /* The new token cannot be larger than the remainder of the operand
- string. */
- new_token.str = (char *) xmalloc (strlen (intel_parser.op_string) + 1);
- new_token.str[0] = '\0';
-
- if (strchr ("0123456789", *intel_parser.op_string))
- {
- char *p = new_token.str;
- char *q = intel_parser.op_string;
- new_token.code = T_CONST;
-
- /* Allow any kind of identifier char to encompass floating point and
- hexadecimal numbers. */
- while (is_identifier_char (*q))
- *p++ = *q++;
- *p = '\0';
-
- /* Recognize special symbol names [0-9][bf]. */
- if (strlen (intel_parser.op_string) == 2
- && (intel_parser.op_string[1] == 'b'
- || intel_parser.op_string[1] == 'f'))
- new_token.code = T_ID;
- }
-
- else if ((reg = parse_register (intel_parser.op_string, &end_op)) != NULL)
- {
- size_t len = end_op - intel_parser.op_string;
-
- new_token.code = T_REG;
- new_token.reg = reg;
-
- memcpy (new_token.str, intel_parser.op_string, len);
- new_token.str[len] = '\0';
- }
-
- else if (is_identifier_char (*intel_parser.op_string))
- {
- char *p = new_token.str;
- char *q = intel_parser.op_string;
-
- /* A '.' or '$' followed by an identifier char is an identifier.
- Otherwise, it's operator '.' followed by an expression. */
- if ((*q == '.' || *q == '$') && !is_identifier_char (*(q + 1)))
- {
- new_token.code = '.';
- new_token.str[0] = '.';
- new_token.str[1] = '\0';
- }
- else
- {
- while (is_identifier_char (*q) || *q == '@')
- *p++ = *q++;
- *p = '\0';
-
- if (strcasecmp (new_token.str, "NOT") == 0)
- new_token.code = '~';
-
- else if (strcasecmp (new_token.str, "MOD") == 0)
- new_token.code = '%';
-
- else if (strcasecmp (new_token.str, "AND") == 0)
- new_token.code = '&';
-
- else if (strcasecmp (new_token.str, "OR") == 0)
- new_token.code = '|';
-
- else if (strcasecmp (new_token.str, "XOR") == 0)
- new_token.code = '^';
-
- else if (strcasecmp (new_token.str, "SHL") == 0)
- new_token.code = T_SHL;
-
- else if (strcasecmp (new_token.str, "SHR") == 0)
- new_token.code = T_SHR;
-
- else if (strcasecmp (new_token.str, "BYTE") == 0)
- new_token.code = T_BYTE;
-
- else if (strcasecmp (new_token.str, "WORD") == 0)
- new_token.code = T_WORD;
-
- else if (strcasecmp (new_token.str, "DWORD") == 0)
- new_token.code = T_DWORD;
-
- else if (strcasecmp (new_token.str, "FWORD") == 0)
- new_token.code = T_FWORD;
-
- else if (strcasecmp (new_token.str, "QWORD") == 0)
- new_token.code = T_QWORD;
-
- else if (strcasecmp (new_token.str, "TBYTE") == 0
- /* XXX remove (gcc still uses it) */
- || strcasecmp (new_token.str, "XWORD") == 0)
- new_token.code = T_TBYTE;
-
- else if (strcasecmp (new_token.str, "XMMWORD") == 0
- || strcasecmp (new_token.str, "OWORD") == 0)
- new_token.code = T_XMMWORD;
-
- else if (strcasecmp (new_token.str, "PTR") == 0)
- new_token.code = T_PTR;
-
- else if (strcasecmp (new_token.str, "SHORT") == 0)
- new_token.code = T_SHORT;
-
- else if (strcasecmp (new_token.str, "OFFSET") == 0)
- {
- new_token.code = T_OFFSET;
-
- /* ??? This is not mentioned in the MASM grammar but gcc
- makes use of it with -mintel-syntax. OFFSET may be
- followed by FLAT: */
- if (strncasecmp (q, " FLAT:", 6) == 0)
- strcat (new_token.str, " FLAT:");
- }
-
- /* ??? This is not mentioned in the MASM grammar. */
- else if (strcasecmp (new_token.str, "FLAT") == 0)
- {
- new_token.code = T_OFFSET;
- if (*q == ':')
- strcat (new_token.str, ":");
- else
- as_bad (_("`:' expected"));
- }
-
- else
- new_token.code = T_ID;
- }
- }
-
- else if (strchr ("+-/*%|&^:[]()~", *intel_parser.op_string))
- {
- new_token.code = *intel_parser.op_string;
- new_token.str[0] = *intel_parser.op_string;
- new_token.str[1] = '\0';
- }
-
- else if (strchr ("<>", *intel_parser.op_string)
- && *intel_parser.op_string == *(intel_parser.op_string + 1))
- {
- new_token.code = *intel_parser.op_string == '<' ? T_SHL : T_SHR;
- new_token.str[0] = *intel_parser.op_string;
- new_token.str[1] = *intel_parser.op_string;
- new_token.str[2] = '\0';
- }
-
- else
- as_bad (_("Unrecognized token `%s'"), intel_parser.op_string);
-
- intel_parser.op_string += strlen (new_token.str);
- cur_token = new_token;
-}
-
-/* Put cur_token back into the token stream and make cur_token point to
- prev_token. */
-static void
-intel_putback_token (void)
-{
- if (cur_token.code != T_NIL)
- {
- intel_parser.op_string -= strlen (cur_token.str);
- free (cur_token.str);
- }
- cur_token = prev_token;
-
- /* Forget prev_token. */
- prev_token.code = T_NIL;
- prev_token.reg = NULL;
- prev_token.str = NULL;
-}
-
-int
-tc_x86_regname_to_dw2regnum (char *regname)
-{
- unsigned int regnum;
- unsigned int regnames_count;
- static const char *const regnames_32[] =
- {
- "eax", "ecx", "edx", "ebx",
- "esp", "ebp", "esi", "edi",
- "eip", "eflags", NULL,
- "st0", "st1", "st2", "st3",
- "st4", "st5", "st6", "st7",
- NULL, NULL,
- "xmm0", "xmm1", "xmm2", "xmm3",
- "xmm4", "xmm5", "xmm6", "xmm7",
- "mm0", "mm1", "mm2", "mm3",
- "mm4", "mm5", "mm6", "mm7",
- "fcw", "fsw", "mxcsr",
- "es", "cs", "ss", "ds", "fs", "gs", NULL, NULL,
- "tr", "ldtr"
- };
- static const char *const regnames_64[] =
- {
- "rax", "rdx", "rcx", "rbx",
- "rsi", "rdi", "rbp", "rsp",
- "r8", "r9", "r10", "r11",
- "r12", "r13", "r14", "r15",
- "rip",
- "xmm0", "xmm1", "xmm2", "xmm3",
- "xmm4", "xmm5", "xmm6", "xmm7",
- "xmm8", "xmm9", "xmm10", "xmm11",
- "xmm12", "xmm13", "xmm14", "xmm15",
- "st0", "st1", "st2", "st3",
- "st4", "st5", "st6", "st7",
- "mm0", "mm1", "mm2", "mm3",
- "mm4", "mm5", "mm6", "mm7",
- "rflags",
- "es", "cs", "ss", "ds", "fs", "gs", NULL, NULL,
- "fs.base", "gs.base", NULL, NULL,
- "tr", "ldtr",
- "mxcsr", "fcw", "fsw"
- };
- const char *const *regnames;
-
- if (flag_code == CODE_64BIT)
- {
- regnames = regnames_64;
- regnames_count = ARRAY_SIZE (regnames_64);
- }
- else
- {
- regnames = regnames_32;
- regnames_count = ARRAY_SIZE (regnames_32);
- }
-
- for (regnum = 0; regnum < regnames_count; regnum++)
- if (regnames[regnum] != NULL
- && strcmp (regname, regnames[regnum]) == 0)
- return regnum;
-
- return -1;
-}
-
-void
-tc_x86_frame_initial_instructions (void)
-{
- static unsigned int sp_regno;
-
- if (!sp_regno)
- sp_regno = tc_x86_regname_to_dw2regnum (flag_code == CODE_64BIT
- ? "rsp" : "esp");
-
- cfi_add_CFA_def_cfa (sp_regno, -x86_cie_data_alignment);
- cfi_add_CFA_offset (x86_dwarf2_return_column, x86_cie_data_alignment);
-}
-
-int
-i386_elf_section_type (const char *str, size_t len)
-{
- if (flag_code == CODE_64BIT
- && len == sizeof ("unwind") - 1
- && strncmp (str, "unwind", 6) == 0)
- return SHT_X86_64_UNWIND;
-
- return -1;
-}
-
-#ifdef TE_PE
-void
-tc_pe_dwarf2_emit_offset (symbolS *symbol, unsigned int size)
-{
- expressionS expr;
-
- expr.X_op = O_secrel;
- expr.X_add_symbol = symbol;
- expr.X_add_number = 0;
- emit_expr (&expr, size);
-}
-#endif
+#endif
#if defined (OBJ_ELF) || defined (OBJ_MAYBE_ELF)
/* For ELF on x86-64, add support for SHF_X86_64_LARGE. */
-int
+bfd_vma
x86_64_section_letter (int letter, char **ptr_msg)
{
if (flag_code == CODE_64BIT)
return -1;
}
-int
+bfd_vma
x86_64_section_word (char *str, size_t len)
{
if (len == 5 && flag_code == CODE_64BIT && CONST_STRNEQ (str, "large"))