/* tc-i386.h -- Header file for tc-i386.c
- Copyright (C) 1989, 1992, 1993, 1994, 1995 Free Software Foundation.
+ Copyright 1989, 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000,
+ 2001
+ Free Software Foundation, Inc.
This file is part of GAS, the GNU Assembler.
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
- along with GAS; see the file COPYING. If not, write to
- the Free Software Foundation, 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */
+ along with GAS; see the file COPYING. If not, write to the Free
+ Software Foundation, 59 Temple Place - Suite 330, Boston, MA
+ 02111-1307, USA. */
#ifndef TC_I386
#define TC_I386 1
+#ifdef ANSI_PROTOTYPES
+struct fix;
+#endif
+
+#define TARGET_BYTES_BIG_ENDIAN 0
+
#ifdef TE_LYNX
#define TARGET_FORMAT "coff-i386-lynx"
#endif
type. The idea is that if the original type is already some kind of PIC
relocation, we leave it alone, otherwise we give it the desired type */
-#define TC_RELOC(X,Y) (((X) != BFD_RELOC_386_PLT32 && \
- (X) != BFD_RELOC_386_GOTOFF && \
- (X) != BFD_RELOC_386_GOT32 && \
- (X) != BFD_RELOC_386_GOTPC) ? Y : X)
-
#define tc_fix_adjustable(X) tc_i386_fix_adjustable(X)
-
-/* This is the relocation type for direct references to GLOBAL_OFFSET_TABLE.
- * It comes up in complicated expressions such as
- * _GLOBAL_OFFSET_TABLE_+[.-.L284], which cannot be expressed normally with
- * the regular expressions. The fixup specified here when used at runtime
- * implies that we should add the address of the GOT to the specified location,
- * and as a result we have simplified the expression into something we can use.
- */
-#define TC_RELOC_GLOBAL_OFFSET_TABLE BFD_RELOC_386_GOTPC
+extern int tc_i386_fix_adjustable PARAMS ((struct fix *));
+
+#if (defined (OBJ_MAYBE_ELF) || defined (OBJ_ELF) || defined (OBJ_MAYBE_COFF) || defined (OBJ_COFF)) && !defined (TE_PE)
+/* This arranges for gas/write.c to not apply a relocation if
+ tc_fix_adjustable() says it is not adjustable.
+ The "! symbol_used_in_reloc_p" test is there specifically to cover
+ the case of non-global symbols in linkonce sections. It's the
+ generally correct thing to do though; If a reloc is going to be
+ emitted against a symbol then we don't want to adjust the fixup by
+ applying the reloc during assembly. The reloc will be applied by
+ the linker during final link. */
+#define TC_FIX_ADJUSTABLE(fixP) \
+ (! symbol_used_in_reloc_p ((fixP)->fx_addsy) && tc_fix_adjustable (fixP))
+#endif
/* This expression evaluates to false if the relocation is for a local object
for which we still want to do the relocation at runtime. True if we
are willing to perform this relocation while building the .o file.
This is only used for pcrel relocations, so GOTOFF does not need to be
checked here. I am not sure if some of the others are ever used with
- pcrel, but it is easier to be safe than sorry. */
-
-#define TC_RELOC_RTSYM_LOC_FIXUP(FIX) \
- ((FIX)->fx_r_type != BFD_RELOC_386_PLT32 \
- && (FIX)->fx_r_type != BFD_RELOC_386_GOT32 \
- && (FIX)->fx_r_type != BFD_RELOC_386_GOTPC)
+ pcrel, but it is easier to be safe than sorry. */
+
+#define TC_RELOC_RTSYM_LOC_FIXUP(FIX) \
+ ((FIX)->fx_r_type != BFD_RELOC_386_PLT32 \
+ && (FIX)->fx_r_type != BFD_RELOC_386_GOT32 \
+ && (FIX)->fx_r_type != BFD_RELOC_386_GOTPC \
+ && ((FIX)->fx_addsy == NULL \
+ || (! S_IS_EXTERNAL ((FIX)->fx_addsy) \
+ && ! S_IS_WEAK ((FIX)->fx_addsy) \
+ && S_IS_DEFINED ((FIX)->fx_addsy) \
+ && ! S_IS_COMMON ((FIX)->fx_addsy))))
#define TARGET_ARCH bfd_arch_i386
-#define TARGET_BYTES_BIG_ENDIAN 0
+#define TARGET_MACH (i386_mach ())
+extern unsigned long i386_mach PARAMS ((void));
-#ifdef OBJ_AOUT
+#ifdef TE_FreeBSD
+#define AOUT_TARGET_FORMAT "a.out-i386-freebsd"
+#endif
#ifdef TE_NetBSD
-#define TARGET_FORMAT "a.out-i386-netbsd"
+#define AOUT_TARGET_FORMAT "a.out-i386-netbsd"
#endif
#ifdef TE_386BSD
-#define TARGET_FORMAT "a.out-i386-bsd"
+#define AOUT_TARGET_FORMAT "a.out-i386-bsd"
#endif
#ifdef TE_LINUX
-#define TARGET_FORMAT "a.out-i386-linux"
+#define AOUT_TARGET_FORMAT "a.out-i386-linux"
#endif
#ifdef TE_Mach
-#define TARGET_FORMAT "a.out-mach3"
+#define AOUT_TARGET_FORMAT "a.out-mach3"
+#endif
+#ifdef TE_DYNIX
+#define AOUT_TARGET_FORMAT "a.out-i386-dynix"
#endif
-#ifndef TARGET_FORMAT
-#define TARGET_FORMAT "a.out-i386"
+#ifndef AOUT_TARGET_FORMAT
+#define AOUT_TARGET_FORMAT "a.out-i386"
#endif
-#endif /* OBJ_AOUT */
+#if ((defined (OBJ_MAYBE_COFF) && defined (OBJ_MAYBE_AOUT)) \
+ || defined (OBJ_ELF) || defined (OBJ_MAYBE_ELF))
+extern const char *i386_target_format PARAMS ((void));
+#define TARGET_FORMAT i386_target_format ()
+#else
#ifdef OBJ_ELF
#define TARGET_FORMAT "elf32-i386"
#endif
+#ifdef OBJ_AOUT
+#define TARGET_FORMAT AOUT_TARGET_FORMAT
+#endif
+#endif
#else /* ! BFD_ASSEMBLER */
#define COFF_MAGIC I386MAGIC
#define BFD_ARCH bfd_arch_i386
#define COFF_FLAGS F_AR32WR
-#define TC_COUNT_RELOC(x) ((x)->fx_addsy /* ||(x)->fx_subsy||(x)->fx_offset */)
+#define TC_COUNT_RELOC(x) ((x)->fx_addsy || (x)->fx_r_type==7)
#define TC_COFF_FIX2RTYPE(fixP) tc_coff_fix2rtype(fixP)
-extern short tc_coff_fix2rtype ();
-#define TC_COFF_SIZEMACHDEP(frag) tc_coff_sizemachdep(frag)
+extern short tc_coff_fix2rtype PARAMS ((struct fix *));
+#define TC_COFF_SIZEMACHDEP(frag) tc_coff_sizemachdep (frag)
extern int tc_coff_sizemachdep PARAMS ((fragS *frag));
+
+#ifdef TE_GO32
+/* DJGPP now expects some sections to be 2**4 aligned. */
+#define SUB_SEGMENT_ALIGN(SEG) \
+ ((strcmp (obj_segment_name (SEG), ".text") == 0 \
+ || strcmp (obj_segment_name (SEG), ".data") == 0 \
+ || strcmp (obj_segment_name (SEG), ".bss") == 0 \
+ || strncmp (obj_segment_name (SEG), ".gnu.linkonce.t", 15) == 0 \
+ || strncmp (obj_segment_name (SEG), ".gnu.linkonce.d", 15) == 0 \
+ || strncmp (obj_segment_name (SEG), ".gnu.linkonce.r", 15) == 0) \
+ ? 4 \
+ : 2)
+#else
#define SUB_SEGMENT_ALIGN(SEG) 2
+#endif
+#define TC_RVA_RELOC 7
/* Need this for PIC relocations */
#define NEED_FX_R_TYPE
+#ifdef TE_386BSD
+/* The BSDI linker apparently rejects objects with a machine type of
+ M_386 (100). */
+#define AOUT_MACHTYPE 0
+#else
#define AOUT_MACHTYPE 100
+#endif
+
#undef REVERSE_SORT_RELOCS
#endif /* ! BFD_ASSEMBLER */
+#ifndef LEX_AT
+#define TC_PARSE_CONS_EXPRESSION(EXP, NBYTES) x86_cons (EXP, NBYTES)
+extern void x86_cons PARAMS ((expressionS *, int));
+
+#define TC_CONS_FIX_NEW(FRAG,OFF,LEN,EXP) x86_cons_fix_new(FRAG, OFF, LEN, EXP)
+extern void x86_cons_fix_new
+ PARAMS ((fragS *, unsigned int, unsigned int, expressionS *));
+#endif
+
+#define TC_FORCE_RELOCATION(fixp) tc_i386_force_relocation(fixp)
+extern int tc_i386_force_relocation PARAMS ((struct fix *));
+
#ifdef BFD_ASSEMBLER
#define NO_RELOC BFD_RELOC_NONE
#else
#endif
#define tc_coff_symbol_emit_hook(a) ; /* not used */
+#ifndef BFD_ASSEMBLER
#ifndef OBJ_AOUT
+#ifndef TE_PE
+#ifndef TE_GO32
/* Local labels starts with .L */
#define LOCAL_LABEL(name) (name[0] == '.' \
&& (name[1] == 'L' || name[1] == 'X' || name[1] == '.'))
-#define FAKE_LABEL_NAME ".L0\001"
#endif
+#endif
+#endif
+#endif
+
#define LOCAL_LABELS_FB 1
#define tc_aout_pre_write_hook(x) {;} /* not used */
#define tc_crawl_symbol_chain(a) {;} /* not used */
#define tc_headers_hook(a) {;} /* not used */
+extern const char extra_symbol_chars[];
+#define tc_symbol_chars extra_symbol_chars
+
#define MAX_OPERANDS 3 /* max operands per insn */
-#define MAX_PREFIXES 5 /* max prefixes per opcode */
-#define MAX_IMMEDIATE_OPERANDS 2/* max immediates per insn */
-#define MAX_MEMORY_OPERANDS 2 /* max memory ref per insn (lcall uses 2) */
+#define MAX_IMMEDIATE_OPERANDS 2/* max immediates per insn (lcall, ljmp) */
+#define MAX_MEMORY_OPERANDS 2 /* max memory refs per insn (string ops) */
+
+/* Prefixes will be emitted in the order defined below.
+ WAIT_PREFIX must be the first prefix since FWAIT is really is an
+ instruction, and so must come before any prefixes. */
+#define WAIT_PREFIX 0
+#define LOCKREP_PREFIX 1
+#define ADDR_PREFIX 2
+#define DATA_PREFIX 3
+#define SEG_PREFIX 4
+#define REX_PREFIX 5 /* must come last. */
+#define MAX_PREFIXES 6 /* max prefixes per opcode */
/* we define the syntax here (modulo base,index,scale syntax) */
#define REGISTER_PREFIX '%'
#define IMMEDIATE_PREFIX '$'
#define ABSOLUTE_PREFIX '*'
-#define PREFIX_SEPERATOR '/'
#define TWO_BYTE_OPCODE_ESCAPE 0x0f
#define NOP_OPCODE (char) 0x90
#define NO_INDEX_REGISTER ESP_REG_NUM
/* index_base_byte.base for no base register addressing */
#define NO_BASE_REGISTER EBP_REG_NUM
+#define NO_BASE_REGISTER_16 6
-/* these are the att as opcode suffixes, making movl --> mov, for example */
-#define DWORD_OPCODE_SUFFIX 'l'
-#define WORD_OPCODE_SUFFIX 'w'
-#define BYTE_OPCODE_SUFFIX 'b'
+/* these are the instruction mnemonic suffixes. */
+#define WORD_MNEM_SUFFIX 'w'
+#define BYTE_MNEM_SUFFIX 'b'
+#define SHORT_MNEM_SUFFIX 's'
+#define LONG_MNEM_SUFFIX 'l'
+#define QWORD_MNEM_SUFFIX 'q'
+/* Intel Syntax */
+#define LONG_DOUBLE_MNEM_SUFFIX 'x'
/* modrm.mode = REGMEM_FIELD_HAS_REG when a register is in there */
#define REGMEM_FIELD_HAS_REG 0x3/* always = 0x3 */
#define END_OF_INSN '\0'
-/*
- When an operand is read in it is classified by its type. This type includes
- all the possible ways an operand can be used. Thus, '%eax' is both 'register
- # 0' and 'The Accumulator'. In our language this is expressed by OR'ing
- 'Reg32' (any 32 bit register) and 'Acc' (the accumulator).
- Operands are classified so that we can match given operand types with
- the opcode table in i386-opcode.h.
- */
-#define Unknown 0x0
-/* register */
-#define Reg8 0x1 /* 8 bit reg */
-#define Reg16 0x2 /* 16 bit reg */
-#define Reg32 0x4 /* 32 bit reg */
-#define Reg (Reg8|Reg16|Reg32) /* gen'l register */
-#define WordReg (Reg16|Reg32) /* for push/pop operands */
-/* immediate */
-#define Imm8 0x8 /* 8 bit immediate */
-#define Imm8S 0x10 /* 8 bit immediate sign extended */
-#define Imm16 0x20 /* 16 bit immediate */
-#define Imm32 0x40 /* 32 bit immediate */
-#define Imm1 0x80 /* 1 bit immediate */
-#define ImmUnknown Imm32 /* for unknown expressions */
-#define Imm (Imm8|Imm8S|Imm16|Imm32) /* gen'l immediate */
-/* memory */
-#define Disp8 0x200 /* 8 bit displacement (for jumps) */
-#define Disp16 0x400 /* 16 bit displacement */
-#define Disp32 0x800 /* 32 bit displacement */
-#define Disp (Disp8|Disp16|Disp32) /* General displacement */
-#define DispUnknown Disp32 /* for unknown size displacements */
-#define Mem8 0x1000
-#define Mem16 0x2000
-#define Mem32 0x4000
-#define BaseIndex 0x8000
-#define Mem (Disp|Mem8|Mem16|Mem32|BaseIndex) /* General memory */
-#define WordMem (Mem16|Mem32|Disp|BaseIndex)
-#define ByteMem (Mem8|Disp|BaseIndex)
-/* specials */
-#define InOutPortReg 0x10000 /* register to hold in/out port addr = dx */
-#define ShiftCount 0x20000 /* register to hold shift cound = cl */
-#define Control 0x40000 /* Control register */
-#define Debug 0x80000 /* Debug register */
-#define Test 0x100000 /* Test register */
-#define FloatReg 0x200000 /* Float register */
-#define FloatAcc 0x400000 /* Float stack top %st(0) */
-#define SReg2 0x800000 /* 2 bit segment register */
-#define SReg3 0x1000000 /* 3 bit segment register */
-#define Acc 0x2000000 /* Accumulator %al or %ax or %eax */
-#define ImplicitRegister (InOutPortReg|ShiftCount|Acc|FloatAcc)
-#define JumpAbsolute 0x4000000
-#define Abs8 0x08000000
-#define Abs16 0x10000000
-#define Abs32 0x20000000
-#define Abs (Abs8|Abs16|Abs32)
-
-#define Byte (Reg8|Imm8|Imm8S)
-#define Word (Reg16|Imm16)
-#define DWord (Reg32|Imm32)
-
-#define SMALLEST_DISP_TYPE(num) \
- fits_in_signed_byte(num) ? (Disp8|Disp32|Abs8|Abs32) : (Disp32|Abs32)
+/* Intel Syntax */
+/* Values 0-4 map onto scale factor */
+#define BYTE_PTR 0
+#define WORD_PTR 1
+#define DWORD_PTR 2
+#define QWORD_PTR 3
+#define XWORD_PTR 4
+#define SHORT 5
+#define OFFSET_FLAT 6
+#define FLAT 7
+#define NONE_FOUND 8
typedef struct
{
/* how many operands */
unsigned int operands;
- /* base_opcode is the fundamental opcode byte with a optional prefix(es). */
+ /* base_opcode is the fundamental opcode byte without optional
+ prefix(es). */
unsigned int base_opcode;
/* extension_opcode is the 3 bit extension for group <n> insns.
+ This field is also used to store the 8-bit opcode suffix for the
+ AMD 3DNow! instructions.
If this template has no extension opcode (the usual case) use None */
- unsigned char extension_opcode;
-#define None 0xff /* If no extension_opcode is possible. */
+ unsigned int extension_opcode;
+#define None 0xffff /* If no extension_opcode is possible. */
+
+ /* cpu feature flags */
+ unsigned int cpu_flags;
+#define Cpu086 0x1 /* Any old cpu will do, 0 does the same */
+#define Cpu186 0x2 /* i186 or better required */
+#define Cpu286 0x4 /* i286 or better required */
+#define Cpu386 0x8 /* i386 or better required */
+#define Cpu486 0x10 /* i486 or better required */
+#define Cpu586 0x20 /* i585 or better required */
+#define Cpu686 0x40 /* i686 or better required */
+#define CpuP4 0x80 /* Pentium4 or better required */
+#define CpuK6 0x100 /* AMD K6 or better required*/
+#define CpuAthlon 0x200 /* AMD Athlon or better required*/
+#define CpuSledgehammer 0x400 /* Sledgehammer or better required */
+#define CpuMMX 0x800 /* MMX support required */
+#define CpuSSE 0x1000 /* Streaming SIMD extensions required */
+#define CpuSSE2 0x2000 /* Streaming SIMD extensions 2 required */
+#define Cpu3dnow 0x4000 /* 3dnow! support required */
+#define CpuUnknown 0x8000 /* The CPU is unknown, be on the safe side. */
+
+ /* These flags are set by gas depending on the flag_code. */
+#define Cpu64 0x4000000 /* 64bit support required */
+#define CpuNo64 0x8000000 /* Not supported in the 64bit mode */
+
+ /* The default value for unknown CPUs - enable all features to avoid problems. */
+#define CpuUnknownFlags (Cpu086|Cpu186|Cpu286|Cpu386|Cpu486|Cpu586|Cpu686|CpuP4|CpuSledgehammer|CpuMMX|CpuSSE|CpuSSE2|Cpu3dnow|CpuK6|CpuAthlon)
/* the bits in opcode_modifier are used to generate the final opcode from
the base_opcode. These bits also are used to detect alternate forms of
unsigned int opcode_modifier;
/* opcode_modifier bits: */
-#define W 0x1 /* set if operands are words or dwords */
-#define D 0x2 /* D = 0 if Reg --> Regmem; D = 1 if Regmem --> Reg */
- /* direction flag for floating insns: MUST BE 0x400 */
-#define FloatD 0x400
- /* shorthand */
-#define DW (D|W)
-#define ShortForm 0x10 /* register is in low 3 bits of opcode */
-#define ShortFormW 0x20 /* ShortForm and W bit is 0x8 */
-#define Seg2ShortForm 0x40 /* encoding of load segment reg insns */
-#define Seg3ShortForm 0x80 /* fs/gs segment register insns. */
-#define Jump 0x100 /* special case for jump insns. */
+#define W 0x1 /* set if operands can be words or dwords
+ encoded the canonical way */
+#define D 0x2 /* D = 0 if Reg --> Regmem;
+ D = 1 if Regmem --> Reg: MUST BE 0x2 */
+#define Modrm 0x4
+#define FloatR 0x8 /* src/dest swap for floats: MUST BE 0x8 */
+#define ShortForm 0x10 /* register is in low 3 bits of opcode */
+#define FloatMF 0x20 /* FP insn memory format bit, sized by 0x4 */
+#define Jump 0x40 /* special case for jump insns. */
+#define JumpDword 0x80 /* call and jump */
+#define JumpByte 0x100 /* loop and jecxz */
#define JumpInterSegment 0x200 /* special case for intersegment leaps/calls */
- /* 0x400 CANNOT BE USED since it's already used by FloatD above */
-#define DONT_USE 0x400
-#define NoModrm 0x800
-#define Modrm 0x1000
-#define imulKludge 0x2000
-#define JumpByte 0x4000
-#define JumpDword 0x8000
-#define ReverseRegRegmem 0x10000
-#define Data16 0x20000 /* needs data prefix if in 32-bit mode */
-#define Data32 0x40000 /* needs data prefix if in 16-bit mode */
-
- /* (opcode_modifier & COMES_IN_ALL_SIZES) is true if the
- instuction comes in byte, word, and dword sizes and is encoded into
- machine code in the canonical way. */
-#define COMES_IN_ALL_SIZES (W)
-
- /* (opcode_modifier & COMES_IN_BOTH_DIRECTIONS) indicates that the
- source and destination operands can be reversed by setting either
- the D (for integer insns) or the FloatD (for floating insns) bit
- in base_opcode. */
-#define COMES_IN_BOTH_DIRECTIONS (D|FloatD)
+#define FloatD 0x400 /* direction for float insns: MUST BE 0x400 */
+#define Seg2ShortForm 0x800 /* encoding of load segment reg insns */
+#define Seg3ShortForm 0x1000 /* fs/gs segment register insns. */
+#define Size16 0x2000 /* needs size prefix if in 32-bit mode */
+#define Size32 0x4000 /* needs size prefix if in 16-bit mode */
+#define Size64 0x8000 /* needs size prefix if in 16-bit mode */
+#define IgnoreSize 0x10000 /* instruction ignores operand size prefix */
+#define DefaultSize 0x20000 /* default insn size depends on mode */
+#define No_bSuf 0x40000 /* b suffix on instruction illegal */
+#define No_wSuf 0x80000 /* w suffix on instruction illegal */
+#define No_lSuf 0x100000 /* l suffix on instruction illegal */
+#define No_sSuf 0x200000 /* s suffix on instruction illegal */
+#define No_qSuf 0x400000 /* q suffix on instruction illegal */
+#define No_xSuf 0x800000 /* x suffix on instruction illegal */
+#define FWait 0x1000000 /* instruction needs FWAIT */
+#define IsString 0x2000000 /* quick test for string instructions */
+#define regKludge 0x4000000 /* fake an extra reg operand for clr, imul */
+#define IsPrefix 0x8000000 /* opcode is a prefix */
+#define ImmExt 0x10000000 /* instruction has extension in 8 bit imm */
+#define NoRex64 0x20000000 /* instruction don't need Rex64 prefix. */
+#define Rex64 0x40000000 /* instruction require Rex64 prefix. */
+#define Ugh 0x80000000 /* deprecated fp insn, gets a warning */
/* operand_types[i] describes the type of operand i. This is made
by OR'ing together all of the possible type masks. (e.g.
'operand_types[i] = Reg|Imm' specifies that operand i can be
- either a register or an immediate operand */
+ either a register or an immediate operand. */
unsigned int operand_types[3];
+
+ /* operand_types[i] bits */
+ /* register */
+#define Reg8 0x1 /* 8 bit reg */
+#define Reg16 0x2 /* 16 bit reg */
+#define Reg32 0x4 /* 32 bit reg */
+#define Reg64 0x8 /* 64 bit reg */
+ /* immediate */
+#define Imm8 0x10 /* 8 bit immediate */
+#define Imm8S 0x20 /* 8 bit immediate sign extended */
+#define Imm16 0x40 /* 16 bit immediate */
+#define Imm32 0x80 /* 32 bit immediate */
+#define Imm32S 0x100 /* 32 bit immediate sign extended */
+#define Imm64 0x200 /* 64 bit immediate */
+#define Imm1 0x400 /* 1 bit immediate */
+ /* memory */
+#define BaseIndex 0x800
+ /* Disp8,16,32 are used in different ways, depending on the
+ instruction. For jumps, they specify the size of the PC relative
+ displacement, for baseindex type instructions, they specify the
+ size of the offset relative to the base register, and for memory
+ offset instructions such as `mov 1234,%al' they specify the size of
+ the offset relative to the segment base. */
+#define Disp8 0x1000 /* 8 bit displacement */
+#define Disp16 0x2000 /* 16 bit displacement */
+#define Disp32 0x4000 /* 32 bit displacement */
+#define Disp32S 0x8000 /* 32 bit signed displacement */
+#define Disp64 0x10000 /* 64 bit displacement */
+ /* specials */
+#define InOutPortReg 0x20000 /* register to hold in/out port addr = dx */
+#define ShiftCount 0x40000 /* register to hold shift cound = cl */
+#define Control 0x80000 /* Control register */
+#define Debug 0x100000 /* Debug register */
+#define Test 0x200000 /* Test register */
+#define FloatReg 0x400000 /* Float register */
+#define FloatAcc 0x800000 /* Float stack top %st(0) */
+#define SReg2 0x1000000 /* 2 bit segment register */
+#define SReg3 0x2000000 /* 3 bit segment register */
+#define Acc 0x4000000 /* Accumulator %al or %ax or %eax */
+#define JumpAbsolute 0x8000000
+#define RegMMX 0x10000000 /* MMX register */
+#define RegXMM 0x20000000 /* XMM registers in PIII */
+#define EsSeg 0x40000000 /* String insn operand with fixed es segment */
+
+ /* InvMem is for instructions with a modrm byte that only allow a
+ general register encoding in the i.tm.mode and i.tm.regmem fields,
+ eg. control reg moves. They really ought to support a memory form,
+ but don't, so we add an InvMem flag to the register operand to
+ indicate that it should be encoded in the i.tm.regmem field. */
+#define InvMem 0x80000000
+
+#define Reg (Reg8|Reg16|Reg32|Reg64) /* gen'l register */
+#define WordReg (Reg16|Reg32|Reg64)
+#define ImplicitRegister (InOutPortReg|ShiftCount|Acc|FloatAcc)
+#define Imm (Imm8|Imm8S|Imm16|Imm32S|Imm32|Imm64) /* gen'l immediate */
+#define EncImm (Imm8|Imm16|Imm32|Imm32S) /* Encodable gen'l immediate */
+#define Disp (Disp8|Disp16|Disp32|Disp32S|Disp64) /* General displacement */
+#define AnyMem (Disp8|Disp16|Disp32|Disp32S|BaseIndex|InvMem) /* General memory */
+ /* The following aliases are defined because the opcode table
+ carefully specifies the allowed memory types for each instruction.
+ At the moment we can only tell a memory reference size by the
+ instruction suffix, so there's not much point in defining Mem8,
+ Mem16, Mem32 and Mem64 opcode modifiers - We might as well just use
+ the suffix directly to check memory operands. */
+#define LLongMem AnyMem /* 64 bits (or more) */
+#define LongMem AnyMem /* 32 bit memory ref */
+#define ShortMem AnyMem /* 16 bit memory ref */
+#define WordMem AnyMem /* 16 or 32 bit memory ref */
+#define ByteMem AnyMem /* 8 bit memory ref */
}
template;
END.
*/
typedef struct
- {
- template *start;
- template *end;
- } templates;
+{
+ const template *start;
+ const template *end;
+}
+templates;
/* these are for register name --> number & type hash lookup */
typedef struct
- {
- char *reg_name;
- unsigned int reg_type;
- unsigned int reg_num;
- }
-
+{
+ char *reg_name;
+ unsigned int reg_type;
+ unsigned int reg_flags;
+#define RegRex 0x1 /* Extended register. */
+#define RegRex64 0x2 /* Extended 8 bit register. */
+ unsigned int reg_num;
+}
reg_entry;
typedef struct
- {
- char *seg_name;
- unsigned int seg_prefix;
- }
-
+{
+ char *seg_name;
+ unsigned int seg_prefix;
+}
seg_entry;
-/* these are for prefix name --> prefix code hash lookup */
+/* 386 operand encoding bytes: see 386 book for details of this. */
typedef struct
- {
- char *prefix_name;
- unsigned char prefix_code;
- }
-
-prefix_entry;
+{
+ unsigned int regmem; /* codes register or memory operand */
+ unsigned int reg; /* codes register operand (or extended opcode) */
+ unsigned int mode; /* how to interpret regmem & reg */
+}
+modrm_byte;
-/* 386 operand encoding bytes: see 386 book for details of this. */
+/* x86-64 extension prefix. */
typedef struct
{
- unsigned regmem:3; /* codes register or memory operand */
- unsigned reg:3; /* codes register operand (or extended opcode) */
- unsigned mode:2; /* how to interpret regmem & reg */
+ unsigned int mode64;
+ unsigned int extX; /* Used to extend modrm reg field. */
+ unsigned int extY; /* Used to extend SIB index field. */
+ unsigned int extZ; /* Used to extend modrm reg/mem, SIB base, modrm base fields. */
+ unsigned int empty; /* Used to old-style byte registers to new style. */
}
+rex_byte;
-modrm_byte;
-
-/* 386 opcode byte to code indirect addressing. */
+/* 386 opcode byte to code indirect addressing. */
typedef struct
- {
- unsigned base:3;
- unsigned index:3;
- unsigned scale:2;
- }
+{
+ unsigned base;
+ unsigned index;
+ unsigned scale;
+}
+sib_byte;
-base_index_byte;
+/* x86 arch names and features */
+typedef struct
+{
+ const char *name; /* arch name */
+ unsigned int flags; /* cpu feature flags */
+}
+arch_entry;
/* The name of the global offset table generated by the compiler. Allow
- this to be overridden if need be. */
+ this to be overridden if need be. */
#ifndef GLOBAL_OFFSET_TABLE_NAME
#define GLOBAL_OFFSET_TABLE_NAME "_GLOBAL_OFFSET_TABLE_"
#endif
#ifdef BFD_ASSEMBLER
-void i386_validate_fix ();
+void i386_validate_fix PARAMS ((struct fix *));
#define TC_VALIDATE_FIX(FIXP,SEGTYPE,SKIP) i386_validate_fix(FIXP)
#endif
extern const struct relax_type md_relax_table[];
#define TC_GENERIC_RELAX_TABLE md_relax_table
-/* end of tc-i386.h */
+#define md_do_align(n, fill, len, max, around) \
+if ((n) && !need_pass_2 \
+ && (!(fill) || ((char)*(fill) == (char)0x90 && (len) == 1)) \
+ && subseg_text_p (now_seg)) \
+ { \
+ frag_align_code ((n), (max)); \
+ goto around; \
+ }
+
+#define MAX_MEM_FOR_RS_ALIGN_CODE 15
+
+extern void i386_align_code PARAMS ((fragS *, int));
+
+#define HANDLE_ALIGN(fragP) \
+if (fragP->fr_type == rs_align_code) \
+ i386_align_code (fragP, (fragP->fr_next->fr_address \
+ - fragP->fr_address \
+ - fragP->fr_fix));
+
+/* call md_apply_fix3 with segment instead of md_apply_fix */
+#define MD_APPLY_FIX3
+
+void i386_print_statistics PARAMS ((FILE *));
+#define tc_print_statistics i386_print_statistics
+
+#define md_number_to_chars number_to_chars_littleendian
+
+#ifdef SCO_ELF
+#define tc_init_after_args() sco_id ()
+extern void sco_id PARAMS ((void));
+#endif
+
+#define DIFF_EXPR_OK /* foo-. gets turned into PC relative relocs */
projects / deliverable / binutils-gdb.git / blobdiff