-/* tc-i860.c -- Assemble for the I860
- Copyright (C) 1989, 1992 Free Software Foundation, Inc.
-
+/* tc-i860.c -- Assembler for the Intel i860 architecture.
+ Copyright (C) 1989, 1992, 1993, 1994, 1995, 1998, 1999, 2000
+ Free Software Foundation, Inc.
+
+ Brought back from the dead and completely reworked
+ by Jason Eckhardt <jle@cygnus.com>.
+
This file is part of GAS, the GNU Assembler.
-
+
GAS is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation; either version 2, or (at your option)
any later version.
-
+
GAS is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with GAS; see the file COPYING. If not, write to
- the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA. */
-#include "as.h"
+ You should have received a copy of the GNU General Public License along
+ with GAS; see the file COPYING. If not, write to the Free Software
+ Foundation, 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */
+#include <ctype.h>
+#include <stdio.h>
+#include <string.h>
+#include "as.h"
+#include "subsegs.h"
#include "opcode/i860.h"
+#include "elf/i860.h"
-/* incorporated from i860.h */
-enum reloc_type /* NOTE: three bits max, see struct reloc_info_i860.r_type */
-{
- NO_RELOC = 0, BRADDR, LOW0, LOW1, LOW2, LOW3, LOW4, SPLIT0, SPLIT1, SPLIT2, RELOC_32,
-};
+/* Defined by default since this is primarily a SVR4/860 assembler.
+ However, I'm trying to leave the door open for Intel syntax. Of course,
+ if full support for anything other than SVR4 is done, then we should
+ select this based on a command-line flag. */
+#define SYNTAX_SVR4
-enum highlow_type /* NOTE: two bits max, see reloc_info_i860.r_type */
-{
- NO_SPEC = 0, PAIR, HIGH, HIGHADJ,
-};
-
-struct reloc_info_i860
-{
- unsigned long r_address;
- /*
- * Using bit fields here is a bad idea because the order is not portable. :-(
- */
- unsigned int r_symbolnum: 24;
- unsigned int r_pcrel : 1;
- unsigned int r_extern : 1;
- /* combining the two field simplifies the argument passing in "new_fix()" */
- /* and is compatible with the existing Sparc #ifdef's */
- /* r_type: highlow_type - bits 5,4; reloc_type - bits 3-0 */
- unsigned int r_type : 6;
- long r_addend;
-};
-
-#define relocation_info reloc_info_i860
+/* The opcode hash table. */
+static struct hash_control *op_hash = NULL;
+/* These characters always start a comment. */
+const char comment_chars[] = "#!/";
-void md_begin();
-void md_end();
-void md_number_to_chars();
-void md_assemble();
-char *md_atof();
-void md_convert_frag();
-void md_create_short_jump();
-void md_create_long_jump();
-int md_estimate_size_before_relax();
-void md_number_to_imm();
-void md_number_to_disp();
-void md_number_to_field();
-void md_ri_to_chars();
-static void i860_ip();
-void emit_machine_reloc();
+/* These characters start a comment at the beginning of a line. */
+const char line_comment_chars[] = "#/";
-int md_reloc_size = sizeof(struct relocation_info);
+const char line_separator_chars[] = ";";
-void (*md_emit_relocations)() = emit_machine_reloc;
+/* Characters that can be used to separate the mantissa from the exponent
+ in floating point numbers. */
+const char EXP_CHARS[] = "eE";
-const relax_typeS md_relax_table[] = { 0 };
+/* Characters that indicate this number is a floating point constant.
+ As in 0f12.456 or 0d1.2345e12. */
+const char FLT_CHARS[] = "rRsSfFdDxXpP";
-/* handle of the OPCODE hash table */
-static struct hash_control *op_hash = NULL;
+/* Register prefix. */
+#ifdef SYNTAX_SVR4
+static const char reg_prefix = '%';
+#else
+static const char reg_prefix = 0;
+#endif
-static void s_dual(), s_enddual();
-static void s_atmp();
-
-const pseudo_typeS
- md_pseudo_table[] = {
- { "dual", s_dual, 4 },
- { "enddual", s_enddual, 4 },
- { "atmp", s_atmp, 4 },
- { NULL, 0, 0 },
- };
-
-int md_short_jump_size = 4;
-int md_long_jump_size = 4;
-
-/* This array holds the chars that always start a comment. If the
- pre-processor is disabled, these aren't very useful */
-char comment_chars[] = "!/"; /* JF removed '|' from comment_chars */
-
-/* This array holds the chars that only start a comment at the beginning of
- a line. If the line seems to have the form '# 123 filename'
- .line and .file directives will appear in the pre-processed output */
-/* Note that input_file.c hand checks for '#' at the beginning of the
- first line of the input file. This is because the compiler outputs
- #NO_APP at the beginning of its output. */
-/* Also note that comments like this one will always work. */
-char line_comment_chars[] = "#/";
-
-/* Chars that can be used to separate mant from exp in floating point nums */
-char EXP_CHARS[] = "eE";
-
-/* Chars that mean this number is a floating point constant */
-/* As in 0f12.456 */
-/* or 0d1.2345e12 */
-char FLT_CHARS[] = "rRsSfFdDxXpP";
-
-/* Also be aware that MAXIMUM_NUMBER_OF_CHARS_FOR_FLOAT may have to be
- changed in read.c . Ideally it shouldn't have to know about it at all,
- but nothing is ideal around here.
- */
-int size_reloc_info = sizeof(struct relocation_info);
-
-static unsigned char octal[256];
-#define isoctal(c) octal[c]
- static unsigned char toHex[256];
-
-struct i860_it {
- char *error;
- unsigned long opcode;
- struct nlist *nlistp;
- expressionS exp;
- int pcrel;
- enum expand_type expand;
- enum highlow_type highlow;
- enum reloc_type reloc;
+struct i860_it
+{
+ char *error;
+ unsigned long opcode;
+ expressionS exp;
+ enum expand_type expand;
+ bfd_reloc_code_real_type reloc;
+ int pcrel;
+ valueT fup;
} the_insn;
-#if __STDC__ == 1
-
-static void print_insn(struct i860_it *insn);
-static int getExpression(char *str);
+static char *expr_end;
-#else /* not __STDC__ */
+/* Indicates error if a pseudo operation was expanded after a branch. */
+static char last_expand;
-static void print_insn();
-static int getExpression();
+/* If true, then warn if any pseudo operations were expanded. */
+static int target_warn_expand = 0;
-#endif /* not __STDC__ */
+/* Prototypes. */
+static void i860_process_insn PARAMS ((char *));
+static void s_dual PARAMS ((int));
+static void s_enddual PARAMS ((int));
+static void s_atmp PARAMS ((int));
+static int i860_get_expression PARAMS ((char *));
+static bfd_reloc_code_real_type obtain_reloc_for_imm16
+ PARAMS ((fixS *, long *));
+#ifdef DEBUG_I860
+static void print_insn PARAMS ((struct i860_it *));
+#endif
-static char *expr_end;
-static char last_expand; /* error if expansion after branch */
+const pseudo_typeS md_pseudo_table[] =
+{
+#ifdef OBJ_ELF
+ {"align", s_align_bytes, 0},
+#endif
+ {"dual", s_dual, 0},
+ {"enddual", s_enddual, 0},
+ {"atmp", s_atmp, 0},
+ {NULL, 0, 0},
+};
+/* Dual-instruction mode handling. */
enum dual
{
- DUAL_OFF = 0, DUAL_ON, DUAL_DDOT, DUAL_ONDDOT,
+ DUAL_OFF = 0, DUAL_ON, DUAL_DDOT, DUAL_ONDDOT,
};
-static enum dual dual_mode = DUAL_OFF; /* dual-instruction mode */
+static enum dual dual_mode = DUAL_OFF;
+/* Handle ".dual" directive. */
static void
- s_dual() /* floating point instructions have dual set */
+s_dual (ignore)
+ int ignore ATTRIBUTE_UNUSED;
{
- dual_mode = DUAL_ON;
+ dual_mode = DUAL_ON;
}
+/* Handle ".enddual" directive. */
static void
- s_enddual() /* floating point instructions have dual set */
+s_enddual (ignore)
+ int ignore ATTRIBUTE_UNUSED;
{
- dual_mode = DUAL_OFF;
+ dual_mode = DUAL_OFF;
}
-static int atmp = 31; /* temporary register for pseudo's */
+/* Temporary register used when expanding assembler pseudo operations. */
+static int atmp = 31;
static void
- s_atmp()
+s_atmp (ignore)
+ int ignore ATTRIBUTE_UNUSED;
{
- register int temp;
- if (strncmp(input_line_pointer, "sp", 2) == 0) {
- input_line_pointer += 2;
- atmp = 2;
- }
- else if (strncmp(input_line_pointer, "fp", 2) == 0) {
- input_line_pointer += 2;
- atmp = 3;
- }
- else if (strncmp(input_line_pointer, "r", 1) == 0) {
- input_line_pointer += 1;
- temp = get_absolute_expression();
- if (temp >= 0 && temp <= 31)
- atmp = temp;
- else
- as_bad("Unknown temporary pseudo register");
- }
- else {
- as_bad("Unknown temporary pseudo register");
- }
- demand_empty_rest_of_line();
- return;
+ register int temp;
+ if (strncmp (input_line_pointer, "sp", 2) == 0)
+ {
+ input_line_pointer += 2;
+ atmp = 2;
+ }
+ else if (strncmp (input_line_pointer, "fp", 2) == 0)
+ {
+ input_line_pointer += 2;
+ atmp = 3;
+ }
+ else if (strncmp (input_line_pointer, "r", 1) == 0)
+ {
+ input_line_pointer += 1;
+ temp = get_absolute_expression ();
+ if (temp >= 0 && temp <= 31)
+ atmp = temp;
+ else
+ as_bad (_("Unknown temporary pseudo register"));
+ }
+ else
+ {
+ as_bad (_("Unknown temporary pseudo register"));
+ }
+ demand_empty_rest_of_line ();
}
/* This function is called once, at assembler startup time. It should
- set up all the tables, etc. that the MD part of the assembler will need. */
+ set up all the tables and data structures that the MD part of the
+ assembler will need. */
void
- md_begin()
+md_begin ()
{
- register char *retval = NULL;
- int lose = 0;
- register unsigned int i = 0;
-
- op_hash = hash_new();
- if (op_hash == NULL)
- as_fatal("Virtual memory exhausted");
-
- while (i < NUMOPCODES)
+ const char *retval = NULL;
+ int lose = 0;
+ unsigned int i = 0;
+
+ op_hash = hash_new ();
+
+ while (i860_opcodes[i].name != NULL)
+ {
+ const char *name = i860_opcodes[i].name;
+ retval = hash_insert (op_hash, name, (PTR)&i860_opcodes[i]);
+ if (retval != NULL)
+ {
+ fprintf (stderr, _("internal error: can't hash `%s': %s\n"),
+ i860_opcodes[i].name, retval);
+ lose = 1;
+ }
+ do
+ {
+ if (i860_opcodes[i].match & i860_opcodes[i].lose)
{
- const char *name = i860_opcodes[i].name;
- retval = hash_insert(op_hash, name, &i860_opcodes[i]);
- if(retval != NULL && *retval != '\0')
- {
- fprintf (stderr, "internal error: can't hash `%s': %s\n",
- i860_opcodes[i].name, retval);
- lose = 1;
- }
- do
- {
- if (i860_opcodes[i].match & i860_opcodes[i].lose)
- {
- fprintf (stderr, "internal error: losing opcode: `%s' \"%s\"\n",
- i860_opcodes[i].name, i860_opcodes[i].args);
- lose = 1;
- }
- ++i;
- } while (i < NUMOPCODES
- && !strcmp(i860_opcodes[i].name, name));
+ fprintf (stderr,
+ _("internal error: losing opcode: `%s' \"%s\"\n"),
+ i860_opcodes[i].name, i860_opcodes[i].args);
+ lose = 1;
}
-
- if (lose)
- as_fatal("Broken assembler. No assembly attempted.");
-
- for (i = '0'; i < '8'; ++i)
- octal[i] = 1;
- for (i = '0'; i <= '9'; ++i)
- toHex[i] = i - '0';
- for (i = 'a'; i <= 'f'; ++i)
- toHex[i] = i + 10 - 'a';
- for (i = 'A'; i <= 'F'; ++i)
- toHex[i] = i + 10 - 'A';
+ ++i;
+ }
+ while (i860_opcodes[i].name != NULL
+ && strcmp (i860_opcodes[i].name, name) == 0);
+ }
+
+ if (lose)
+ as_fatal (_("Defective assembler. No assembly attempted."));
}
+/* This is the core of the machine-dependent assembler. STR points to a
+ machine dependent instruction. This function emits the frags/bytes
+ it assembles to. */
void
- md_end()
+md_assemble (str)
+ char *str;
{
- return;
+ char *destp;
+ int num_opcodes = 1;
+ int i;
+ struct i860_it pseudo[3];
+
+ assert (str);
+
+ /* Assemble the instruction. */
+ i860_process_insn (str);
+
+ /* Check for expandable flag to produce pseudo-instructions. This
+ is an undesirable feature that should be avoided. */
+ if (the_insn.expand != 0
+ && ! (the_insn.fup & (OP_SEL_HA | OP_SEL_H | OP_SEL_L | OP_SEL_GOT
+ | OP_SEL_GOTOFF | OP_SEL_PLT)))
+ {
+ for (i = 0; i < 3; i++)
+ pseudo[i] = the_insn;
+
+ switch (the_insn.expand)
+ {
+
+ case E_DELAY:
+ num_opcodes = 1;
+ break;
+
+ case E_MOV:
+ if (the_insn.exp.X_add_symbol == NULL
+ && the_insn.exp.X_op_symbol == NULL
+ && (the_insn.exp.X_add_number < (1 << 15)
+ && the_insn.exp.X_add_number >= -(1 << 15)))
+ break;
+
+ /* Emit "or l%const,r0,ireg_dest". */
+ pseudo[0].opcode = (the_insn.opcode & 0x001f0000) | 0xe4000000;
+ pseudo[0].fup = (OP_IMM_S16 | OP_SEL_L);
+
+ /* Emit "orh h%const,ireg_dest,ireg_dest". */
+ pseudo[1].opcode = (the_insn.opcode & 0x03ffffff) | 0xec000000
+ | ((the_insn.opcode & 0x001f0000) << 5);
+ pseudo[1].fup = (OP_IMM_S16 | OP_SEL_H);
+
+ num_opcodes = 2;
+ break;
+
+ case E_ADDR:
+ if (the_insn.exp.X_add_symbol == NULL
+ && the_insn.exp.X_op_symbol == NULL
+ && (the_insn.exp.X_add_number < (1 << 15)
+ && the_insn.exp.X_add_number >= -(1 << 15)))
+ break;
+
+ /* Emit "orh ha%addr_expr,r0,r31". */
+ pseudo[0].opcode = 0xec000000 | (atmp << 16);
+ pseudo[0].fup = (OP_IMM_S16 | OP_SEL_HA);
+
+ /* Emit "l%addr_expr(r31),ireg_dest". We pick up the fixup
+ information from the original instruction. */
+ pseudo[1].opcode = (the_insn.opcode & ~0x03e00000) | (atmp << 21);
+ pseudo[1].fup = the_insn.fup | OP_SEL_L;
+
+ num_opcodes = 2;
+ break;
+
+ case E_U32:
+ if (the_insn.exp.X_add_symbol == NULL
+ && the_insn.exp.X_op_symbol == NULL
+ && (the_insn.exp.X_add_number < (1 << 16)
+ && the_insn.exp.X_add_number >= 0))
+ break;
+
+ /* Emit "$(opcode)h h%const,ireg_src2,r31". */
+ pseudo[0].opcode = (the_insn.opcode & 0xf3e0ffff) | 0x0c000000
+ | (atmp << 16);
+ pseudo[0].fup = (OP_IMM_S16 | OP_SEL_H);
+
+ /* Emit "$(opcode) l%const,r31,ireg_dest". */
+ pseudo[1].opcode = (the_insn.opcode & 0xf01f0000) | 0x04000000
+ | (atmp << 21);
+ pseudo[1].fup = (OP_IMM_S16 | OP_SEL_L);
+
+ num_opcodes = 2;
+ break;
+
+ case E_AND:
+ if (the_insn.exp.X_add_symbol == NULL
+ && the_insn.exp.X_op_symbol == NULL
+ && (the_insn.exp.X_add_number < (1 << 16)
+ && the_insn.exp.X_add_number >= 0))
+ break;
+
+ /* Emit "andnot h%const,ireg_src2,r31". */
+ pseudo[0].opcode = (the_insn.opcode & 0x03e0ffff) | 0xd4000000
+ | (atmp << 16);
+ pseudo[0].fup = (OP_IMM_S16 | OP_SEL_H);
+ pseudo[0].exp.X_add_number = -1 - the_insn.exp.X_add_number;
+
+ /* Emit "andnot l%const,r31,ireg_dest". */
+ pseudo[1].opcode = (the_insn.opcode & 0x001f0000) | 0xd4000000
+ | (atmp << 21);
+ pseudo[1].fup = (OP_IMM_S16 | OP_SEL_L);
+ pseudo[1].exp.X_add_number = -1 - the_insn.exp.X_add_number;
+
+ num_opcodes = 2;
+ break;
+
+ case E_S32:
+ if (the_insn.exp.X_add_symbol == NULL
+ && the_insn.exp.X_op_symbol == NULL
+ && (the_insn.exp.X_add_number < (1 << 15)
+ && the_insn.exp.X_add_number >= -(1 << 15)))
+ break;
+
+ /* Emit "orh h%const,r0,r31". */
+ pseudo[0].opcode = 0xec000000 | (atmp << 16);
+ pseudo[0].fup = (OP_IMM_S16 | OP_SEL_H);
+
+ /* Emit "or l%const,r31,r31". */
+ pseudo[1].opcode = 0xe4000000 | (atmp << 21) | (atmp << 16);
+ pseudo[1].fup = (OP_IMM_S16 | OP_SEL_L);
+
+ /* Emit "r31,ireg_src2,ireg_dest". */
+ pseudo[2].opcode = (the_insn.opcode & ~0x0400ffff) | (atmp << 11);
+ pseudo[2].fup = OP_IMM_S16;
+
+ num_opcodes = 3;
+ break;
+
+ default:
+ as_fatal (_("failed sanity check."));
+ }
+
+ the_insn = pseudo[0];
+
+ /* Warn if an opcode is expanded after a delayed branch. */
+ if (num_opcodes > 1 && last_expand == 1)
+ as_warn (_("Expanded opcode after delayed branch: `%s'"), str);
+
+ /* Warn if an opcode is expanded in dual mode. */
+ if (num_opcodes > 1 && dual_mode != DUAL_OFF)
+ as_warn (_("Expanded opcode in dual mode: `%s'"), str);
+
+ /* Notify if any expansions happen. */
+ if (target_warn_expand && num_opcodes > 1)
+ as_warn (_("An instruction was expanded (%s)"), str);
+ }
+
+ i = 0;
+ do
+ {
+ /* Output the opcode. Note that the i860 always reads instructions
+ as little-endian data. */
+ destp = frag_more (4);
+ number_to_chars_littleendian (destp, the_insn.opcode, 4);
+
+ /* Check for expanded opcode after branch or in dual mode. */
+ last_expand = the_insn.pcrel;
+
+ /* Output the symbol-dependent stuff. */
+ if (the_insn.fup != OP_NONE)
+ {
+ fixS *fix;
+ fix = fix_new_exp (frag_now,
+ destp - frag_now->fr_literal,
+ 4,
+ &the_insn.exp,
+ the_insn.pcrel,
+ the_insn.reloc);
+
+ /* Despite the odd name, this is a scratch field. We use
+ it to encode operand type information. */
+ fix->fx_addnumber = the_insn.fup;
+ }
+ the_insn = pseudo[++i];
+ }
+ while (--num_opcodes > 0);
+
}
-void
- md_assemble(str)
-char *str;
+/* Assemble the instruction pointed to by STR. */
+static void
+i860_process_insn (str)
+ char *str;
{
- char *toP;
- int rsd;
- int no_opcodes = 1;
- int i;
- struct i860_it pseudo[3];
-
- assert(str);
- i860_ip(str);
-
- /* check for expandable flag to produce pseudo-instructions */
- if (the_insn.expand != 0 && the_insn.highlow == NO_SPEC) {
- for (i = 0; i < 3; i++)
- pseudo[i] = the_insn;
-
- switch (the_insn.expand) {
-
- case E_DELAY:
- no_opcodes = 1;
- break;
-
- case E_MOV:
- if (the_insn.exp.X_add_symbol == NULL &&
- the_insn.exp.X_subtract_symbol == NULL &&
- (the_insn.exp.X_add_number < (1 << 15) &&
- the_insn.exp.X_add_number >= -(1 << 15)))
- break;
- /* or l%const,r0,ireg_dest */
- pseudo[0].opcode = (the_insn.opcode & 0x001f0000) | 0xe4000000;
- pseudo[0].highlow = PAIR;
- /* orh h%const,ireg_dest,ireg_dest */
- pseudo[1].opcode = (the_insn.opcode & 0x03ffffff) | 0xec000000 |
- ((the_insn.opcode & 0x001f0000) << 5);
- pseudo[1].highlow = HIGH;
- no_opcodes = 2;
- break;
-
- case E_ADDR:
- if (the_insn.exp.X_add_symbol == NULL &&
- the_insn.exp.X_subtract_symbol == NULL)
- break;
- /* orh ha%addr_expr,r0,r31 */
- pseudo[0].opcode = 0xec000000 | (atmp<<16);
- pseudo[0].highlow = HIGHADJ;
- pseudo[0].reloc = LOW0; /* must overwrite */
- /* l%addr_expr(r31),ireg_dest */
- pseudo[1].opcode = (the_insn.opcode & ~0x003e0000) | (atmp << 21);
- pseudo[1].highlow = PAIR;
- no_opcodes = 2;
- break;
-
- case E_U32: /* 2nd version emulates Intel as, not doc. */
- if (the_insn.exp.X_add_symbol == NULL &&
- the_insn.exp.X_subtract_symbol == NULL &&
- (the_insn.exp.X_add_number < (1 << 16) &&
- the_insn.exp.X_add_number >= 0))
- break;
- /* $(opcode)h h%const,ireg_src2,ireg_dest
- pseudo[0].opcode = (the_insn.opcode & 0xf3ffffff) | 0x0c000000; */
- /* $(opcode)h h%const,ireg_src2,r31 */
- pseudo[0].opcode = (the_insn.opcode & 0xf3e0ffff) | 0x0c000000 |
- (atmp << 16);
- pseudo[0].highlow = HIGH;
- /* $(opcode) l%const,ireg_dest,ireg_dest
- pseudo[1].opcode = (the_insn.opcode & 0xf01f0000) | 0x04000000 |
- ((the_insn.opcode & 0x001f0000) << 5); */
- /* $(opcode) l%const,r31,ireg_dest */
- pseudo[1].opcode = (the_insn.opcode & 0xf01f0000) | 0x04000000 |
- (atmp << 21);
- pseudo[1].highlow = PAIR;
- no_opcodes = 2;
- break;
-
- case E_AND: /* 2nd version emulates Intel as, not doc. */
- if (the_insn.exp.X_add_symbol == NULL &&
- the_insn.exp.X_subtract_symbol == NULL &&
- (the_insn.exp.X_add_number < (1 << 16) &&
- the_insn.exp.X_add_number >= 0))
- break;
- /* andnot h%const,ireg_src2,ireg_dest
- pseudo[0].opcode = (the_insn.opcode & 0x03ffffff) | 0xd4000000; */
- /* andnot h%const,ireg_src2,r31 */
- pseudo[0].opcode = (the_insn.opcode & 0x03e0ffff) | 0xd4000000 |
- (atmp << 16);
- pseudo[0].highlow = HIGH;
- pseudo[0].exp.X_add_number = -1 - the_insn.exp.X_add_number;
- /* andnot l%const,ireg_dest,ireg_dest
- pseudo[1].opcode = (the_insn.opcode & 0x001f0000) | 0xd4000000 |
- ((the_insn.opcode & 0x001f0000) << 5); */
- /* andnot l%const,r31,ireg_dest */
- pseudo[1].opcode = (the_insn.opcode & 0x001f0000) | 0xd4000000 |
- (atmp << 21);
- pseudo[1].highlow = PAIR;
- pseudo[1].exp.X_add_number = -1 - the_insn.exp.X_add_number;
- no_opcodes = 2;
- break;
-
- case E_S32:
- if (the_insn.exp.X_add_symbol == NULL &&
- the_insn.exp.X_subtract_symbol == NULL &&
- (the_insn.exp.X_add_number < (1 << 15) &&
- the_insn.exp.X_add_number >= -(1 << 15)))
- break;
- /* orh h%const,r0,r31 */
- pseudo[0].opcode = 0xec000000 | (atmp << 16);
- pseudo[0].highlow = HIGH;
- /* or l%const,r31,r31 */
- pseudo[1].opcode = 0xe4000000 | (atmp << 21) | (atmp << 16);
- pseudo[1].highlow = PAIR;
- /* r31,ireg_src2,ireg_dest */
- pseudo[2].opcode = (the_insn.opcode & ~0x0400ffff) | (atmp << 11);
- pseudo[2].reloc = NO_RELOC;
- no_opcodes = 3;
- break;
-
+ char *s;
+ const char *args;
+ char c;
+ struct i860_opcode *insn;
+ char *args_start;
+ unsigned long opcode;
+ unsigned int mask;
+ int match = 0;
+ int comma = 0;
+
+#if 1 /* For compiler warnings. */
+ args = 0;
+ insn = 0;
+ args_start = 0;
+ opcode = 0;
+#endif
+
+ for (s = str; islower (*s) || *s == '.' || *s == '3'
+ || *s == '2' || *s == '1'; ++s)
+ ;
+
+ switch (*s)
+ {
+ case '\0':
+ break;
+
+ case ',':
+ comma = 1;
+
+ /*FALLTHROUGH*/
+
+ case ' ':
+ *s++ = '\0';
+ break;
+
+ default:
+ as_fatal (_("Unknown opcode: `%s'"), str);
+ }
+
+ /* Check for dual mode ("d.") opcode prefix. */
+ if (strncmp (str, "d.", 2) == 0)
+ {
+ if (dual_mode == DUAL_ON)
+ dual_mode = DUAL_ONDDOT;
+ else
+ dual_mode = DUAL_DDOT;
+ str += 2;
+ }
+
+ if ((insn = (struct i860_opcode *) hash_find (op_hash, str)) == NULL)
+ {
+ if (dual_mode == DUAL_DDOT || dual_mode == DUAL_ONDDOT)
+ str -= 2;
+ as_bad (_("Unknown opcode: `%s'"), str);
+ return;
+ }
+
+ if (comma)
+ *--s = ',';
+
+ args_start = s;
+ for (;;)
+ {
+ opcode = insn->match;
+ memset (&the_insn, '\0', sizeof (the_insn));
+ the_insn.reloc = BFD_RELOC_NONE;
+ the_insn.pcrel = 0;
+ the_insn.fup = OP_NONE;
+
+ /* Build the opcode, checking as we go that the operands match. */
+ for (args = insn->args; ; ++args)
+ {
+ switch (*args)
+ {
+
+ /* End of args. */
+ case '\0':
+ if (*s == '\0')
+ match = 1;
+ break;
+
+ /* These must match exactly. */
+ case '+':
+ case '(':
+ case ')':
+ case ',':
+ case ' ':
+ if (*s++ == *args)
+ continue;
+ break;
+
+ /* Must be at least one digit. */
+ case '#':
+ if (isdigit (*s++))
+ {
+ while (isdigit (*s))
+ ++s;
+ continue;
+ }
+ break;
+
+ /* Next operand must be a register. */
+ case '1':
+ case '2':
+ case 'd':
+ /* Check for register prefix if necessary. */
+ if (reg_prefix && *s != reg_prefix)
+ goto error;
+ else
+ s++;
+
+ switch (*s)
+ {
+ /* Frame pointer. */
+ case 'f':
+ s++;
+ if (*s++ == 'p')
+ {
+ mask = 0x3;
+ break;
+ }
+ goto error;
+
+ /* Stack pointer. */
+ case 's':
+ s++;
+ if (*s++ == 'p')
+ {
+ mask = 0x2;
+ break;
+ }
+ goto error;
+
+ /* Any register r0..r31. */
+ case 'r':
+ s++;
+ if (!isdigit (c = *s++))
+ {
+ goto error;
+ }
+ if (isdigit (*s))
+ {
+ if ((c = 10 * (c - '0') + (*s++ - '0')) >= 32)
+ goto error;
+ }
+ else
+ c -= '0';
+ mask = c;
+ break;
+
+ /* Not this opcode. */
default:
- as_fatal("failed sanity check.");
+ goto error;
}
-
- the_insn = pseudo[0];
- /* check for expanded opcode after branch or in dual */
- if (no_opcodes > 1 && last_expand == 1)
- as_warn("Expanded opcode after delayed branch: `%s'", str);
- if (no_opcodes > 1 && dual_mode != DUAL_OFF)
- as_warn("Expanded opcode in dual mode: `%s'", str);
- }
-
- i = 0;
- do { /* always produce at least one opcode */
- toP = frag_more(4);
- /* put out the opcode */
- md_number_to_chars(toP, the_insn.opcode, 4);
-
- /* check for expanded opcode after branch or in dual */
- last_expand = the_insn.pcrel;
-
- /* put out the symbol-dependent stuff */
- if (the_insn.reloc != NO_RELOC) {
- fix_new(
- frag_now, /* which frag */
- (toP - frag_now->fr_literal), /* where */
- 4, /* size */
- the_insn.exp.X_add_symbol,
- the_insn.exp.X_subtract_symbol,
- the_insn.exp.X_add_number,
- the_insn.pcrel,
- /* merge bit fields into one argument */
- (int)(((the_insn.highlow & 0x3) << 4) | (the_insn.reloc & 0xf))
- );
+
+ /* Obtained the register, now place it in the opcode. */
+ switch (*args)
+ {
+ case '1':
+ opcode |= mask << 11;
+ continue;
+
+ case '2':
+ opcode |= mask << 21;
+ continue;
+
+ case 'd':
+ opcode |= mask << 16;
+ continue;
+
}
- the_insn = pseudo[++i];
- } while (--no_opcodes > 0);
-
-}
+ break;
-static void
- i860_ip(str)
-char *str;
-{
- char *s;
- const char *args;
- char c;
- unsigned long i;
- struct i860_opcode *insn;
- char *argsStart;
- unsigned long opcode;
- unsigned int mask;
- int match = 0;
- int comma = 0;
-
-
- for (s = str; islower(*s) || *s == '.' || *s == '3'; ++s)
- ;
- switch (*s) {
-
- case '\0':
- break;
-
- case ',':
- comma = 1;
-
- /*FALLTHROUGH*/
-
- case ' ':
- *s++ = '\0';
- break;
-
- default:
- as_bad("Unknown opcode: `%s'", str);
- exit(1);
- }
-
- if (strncmp(str, "d.", 2) == 0) { /* check for d. opcode prefix */
- if (dual_mode == DUAL_ON)
- dual_mode = DUAL_ONDDOT;
- else
- dual_mode = DUAL_DDOT;
- str += 2;
- }
-
- if ((insn = (struct i860_opcode *) hash_find(op_hash, str)) == NULL) {
- if (dual_mode == DUAL_DDOT || dual_mode == DUAL_ONDDOT)
- str -= 2;
- as_bad("Unknown opcode: `%s'", str);
- return;
- }
- if (comma) {
- *--s = ',';
- }
- argsStart = s;
- for (;;) {
- opcode = insn->match;
- memset(&the_insn, '\0', sizeof(the_insn));
- the_insn.reloc = NO_RELOC;
-
- /*
- * Build the opcode, checking as we go to make
- * sure that the operands match
- */
- for (args = insn->args; ; ++args) {
- switch (*args) {
-
- case '\0': /* end of args */
- if (*s == '\0') {
- match = 1;
- }
- break;
-
- case '+':
- case '(': /* these must match exactly */
- case ')':
- case ',':
- case ' ':
- if (*s++ == *args)
- continue;
- break;
-
- case '#': /* must be at least one digit */
- if (isdigit(*s++)) {
- while (isdigit(*s)) {
- ++s;
- }
- continue;
- }
- break;
-
- case '1': /* next operand must be a register */
- case '2':
- case 'd':
- switch (*s) {
-
- case 'f': /* frame pointer */
- s++;
- if (*s++ == 'p') {
- mask = 0x3;
- break;
- }
- goto error;
-
- case 's': /* stack pointer */
- s++;
- if (*s++ == 'p') {
- mask= 0x2;
- break;
- }
- goto error;
-
- case 'r': /* any register */
- s++;
- if (!isdigit(c = *s++)) {
- goto error;
- }
- if (isdigit(*s)) {
- if ((c = 10 * (c - '0') + (*s++ - '0')) >= 32) {
- goto error;
- }
- } else {
- c -= '0';
- }
- mask= c;
- break;
-
- default: /* not this opcode */
- goto error;
- }
- /*
- * Got the register, now figure out where
- * it goes in the opcode.
- */
- switch (*args) {
-
- case '1':
- opcode |= mask << 11;
- continue;
-
- case '2':
- opcode |= mask << 21;
- continue;
-
- case 'd':
- opcode |= mask << 16;
- continue;
-
- }
- break;
-
- case 'e': /* next operand is a floating point register */
- case 'f':
- case 'g':
- if (*s++ == 'f' && isdigit(*s)) {
- mask = *s++;
- if (isdigit(*s)) {
- mask = 10 * (mask - '0') + (*s++ - '0');
- if (mask >= 32) {
- break;
- }
- } else {
- mask -= '0';
- }
- switch (*args) {
-
- case 'e':
- opcode |= mask << 11;
- continue;
-
- case 'f':
- opcode |= mask << 21;
- continue;
-
- case 'g':
- opcode |= mask << 16;
- if (dual_mode != DUAL_OFF)
- opcode |= (1 << 9); /* dual mode instruction */
- if (dual_mode == DUAL_DDOT)
- dual_mode = DUAL_OFF;
- if (dual_mode == DUAL_ONDDOT)
- dual_mode = DUAL_ON;
- if ((opcode & (1 << 10)) && (mask == ((opcode >> 11) & 0x1f)))
- as_warn("Fsr1 equals fdest with Pipelining");
- continue;
- }
- }
- break;
-
- case 'c': /* next operand must be a control register */
- if (strncmp(s, "fir", 3) == 0) {
- opcode |= 0x0 << 21;
- s += 3;
- continue;
- }
- if (strncmp(s, "psr", 3) == 0) {
- opcode |= 0x1 << 21;
- s += 3;
- continue;
- }
- if (strncmp(s, "dirbase", 7) == 0) {
- opcode |= 0x2 << 21;
- s += 7;
- continue;
- }
- if (strncmp(s, "db", 2) == 0) {
- opcode |= 0x3 << 21;
- s += 2;
- continue;
- }
- if (strncmp(s, "fsr", 3) == 0) {
- opcode |= 0x4 << 21;
- s += 3;
- continue;
- }
- if (strncmp(s, "epsr", 4) == 0) {
- opcode |= 0x5 << 21;
- s += 4;
- continue;
- }
- break;
-
- case '5': /* 5 bit immediate in src1 */
- memset(&the_insn, '\0', sizeof(the_insn));
- if ( !getExpression(s)) {
- s = expr_end;
- if (the_insn.exp.X_add_number & ~0x1f)
- as_bad("5-bit immediate too large");
- opcode |= (the_insn.exp.X_add_number & 0x1f) << 11;
- memset(&the_insn, '\0', sizeof(the_insn));
- the_insn.reloc = NO_RELOC;
- continue;
- }
- break;
-
- case 'l': /* 26 bit immediate, relative branch */
- the_insn.reloc = BRADDR;
- the_insn.pcrel = 1;
- goto immediate;
-
- case 's': /* 16 bit immediate, split relative branch */
- /* upper 5 bits of offset in dest field */
- the_insn.pcrel = 1;
- the_insn.reloc = SPLIT0;
- goto immediate;
-
- case 'S': /* 16 bit immediate, split (st), aligned */
- if (opcode & (1 << 28))
- if (opcode & 0x1)
- the_insn.reloc = SPLIT2;
- else
- the_insn.reloc = SPLIT1;
- else
- the_insn.reloc = SPLIT0;
- goto immediate;
-
- case 'I': /* 16 bit immediate, aligned */
- if (opcode & (1 << 28))
- if (opcode & 0x1)
- the_insn.reloc = LOW2;
- else
- the_insn.reloc = LOW1;
- else
- the_insn.reloc = LOW0;
- goto immediate;
-
- case 'i': /* 16 bit immediate */
- the_insn.reloc = LOW0;
-
- /*FALLTHROUGH*/
-
- immediate:
- if(*s==' ')
- s++;
- if (strncmp(s, "ha%", 3) == 0) {
- the_insn.highlow = HIGHADJ;
- s += 3;
- } else if (strncmp(s, "h%", 2) == 0) {
- the_insn.highlow = HIGH;
- s += 2;
- } else if (strncmp(s, "l%", 2) == 0) {
- the_insn.highlow = PAIR;
- s += 2;
- }
- the_insn.expand = insn->expand;
-
- /* Note that if the getExpression() fails, we will still have
- created U entries in the symbol table for the 'symbols'
- in the input string. Try not to create U symbols for
- registers, etc. */
-
- if ( !getExpression(s)) {
- s = expr_end;
- continue;
- }
- break;
-
- default:
- as_fatal("failed sanity check.");
+ /* Next operand is a floating point register. */
+ case 'e':
+ case 'f':
+ case 'g':
+ /* Check for register prefix if necessary. */
+ if (reg_prefix && *s != reg_prefix)
+ goto error;
+ else
+ s++;
+
+ if (*s++ == 'f' && isdigit (*s))
+ {
+ mask = *s++;
+ if (isdigit (*s))
+ {
+ mask = 10 * (mask - '0') + (*s++ - '0');
+ if (mask >= 32)
+ {
+ break;
}
- break;
- }
- error:
- if (match == 0)
+ }
+ else
+ mask -= '0';
+
+ switch (*args)
{
- /* Args don't match. */
- if (&insn[1] - i860_opcodes < NUMOPCODES
- && !strcmp(insn->name, insn[1].name))
- {
- ++insn;
- s = argsStart;
- continue;
- }
- else
- {
- as_bad("Illegal operands");
- return;
- }
+
+ case 'e':
+ opcode |= mask << 11;
+ continue;
+
+ case 'f':
+ opcode |= mask << 21;
+ continue;
+
+ case 'g':
+ opcode |= mask << 16;
+ if (dual_mode != DUAL_OFF)
+ opcode |= (1 << 9);
+ if (dual_mode == DUAL_DDOT)
+ dual_mode = DUAL_OFF;
+ if (dual_mode == DUAL_ONDDOT)
+ dual_mode = DUAL_ON;
+ if ((opcode & (1 << 10)) && mask != 0
+ && (mask == ((opcode >> 11) & 0x1f)))
+ as_warn (_("Pipelined instruction: fsrc1 = fdest"));
+ continue;
}
- break;
- }
-
- the_insn.opcode = opcode;
- return;
-}
+ }
+ break;
-static int
- getExpression(str)
-char *str;
-{
- char *save_in;
- segT seg;
-
- save_in = input_line_pointer;
- input_line_pointer = str;
- switch (seg = expression(&the_insn.exp)) {
-
- case SEG_ABSOLUTE:
- case SEG_TEXT:
- case SEG_DATA:
- case SEG_BSS:
- case SEG_UNKNOWN:
- case SEG_DIFFERENCE:
- case SEG_BIG:
- case SEG_ABSENT:
- break;
-
- default:
- the_insn.error = "bad segment";
- expr_end = input_line_pointer;
- input_line_pointer=save_in;
- return 1;
- }
- expr_end = input_line_pointer;
- input_line_pointer = save_in;
- return 0;
-}
+ /* Next operand must be a control register. */
+ case 'c':
+ /* Check for register prefix if necessary. */
+ if (reg_prefix && *s != reg_prefix)
+ goto error;
+ else
+ s++;
+ if (strncmp (s, "fir", 3) == 0)
+ {
+ opcode |= 0x0 << 21;
+ s += 3;
+ continue;
+ }
+ if (strncmp (s, "psr", 3) == 0)
+ {
+ opcode |= 0x1 << 21;
+ s += 3;
+ continue;
+ }
+ if (strncmp (s, "dirbase", 7) == 0)
+ {
+ opcode |= 0x2 << 21;
+ s += 7;
+ continue;
+ }
+ if (strncmp (s, "db", 2) == 0)
+ {
+ opcode |= 0x3 << 21;
+ s += 2;
+ continue;
+ }
+ if (strncmp (s, "fsr", 3) == 0)
+ {
+ opcode |= 0x4 << 21;
+ s += 3;
+ continue;
+ }
+ if (strncmp (s, "epsr", 4) == 0)
+ {
+ opcode |= 0x5 << 21;
+ s += 4;
+ continue;
+ }
+ break;
-/*
- This is identical to the md_atof in m68k.c. I think this is right,
- but I'm not sure.
-
- Turn a string in input_line_pointer into a floating point constant of type
- type, and store the appropriate bytes in *litP. The number of LITTLENUMS
- emitted is stored in *sizeP . An error message is returned, or NULL on OK.
- */
+ /* 5-bit immediate in src1. */
+ case '5':
+ if (! i860_get_expression (s))
+ {
+ s = expr_end;
+ the_insn.fup |= OP_IMM_U5;
+ continue;
+ }
+ break;
-/* Equal to MAX_PRECISION in atof-ieee.c */
-#define MAX_LITTLENUMS 6
+ /* 26-bit immediate, relative branch (lbroff). */
+ case 'l':
+ the_insn.pcrel = 1;
+ the_insn.fup |= OP_IMM_BR26;
+ goto immediate;
-char *
- md_atof(type,litP,sizeP)
-char type;
-char *litP;
-int *sizeP;
-{
- int prec;
- LITTLENUM_TYPE words[MAX_LITTLENUMS];
- LITTLENUM_TYPE *wordP;
- char *t;
- char *atof_ieee();
-
- switch(type) {
-
- case 'f':
- case 'F':
- case 's':
- case 'S':
- prec = 2;
- break;
-
- case 'd':
- case 'D':
- case 'r':
- case 'R':
- prec = 4;
- break;
-
- case 'x':
- case 'X':
- prec = 6;
- break;
-
- case 'p':
- case 'P':
- prec = 6;
- break;
-
- default:
- *sizeP=0;
- return "Bad call to MD_ATOF()";
- }
- t=atof_ieee(input_line_pointer,type,words);
- if(t)
- input_line_pointer=t;
- *sizeP=prec * sizeof(LITTLENUM_TYPE);
- for(wordP=words;prec--;) {
- md_number_to_chars(litP,(long)(*wordP++),sizeof(LITTLENUM_TYPE));
- litP+=sizeof(LITTLENUM_TYPE);
- }
- return ""; /* Someone should teach Dean about null pointers */
-}
+ /* 16-bit split immediate, relative branch (sbroff). */
+ case 'r':
+ the_insn.pcrel = 1;
+ the_insn.fup |= OP_IMM_BR16;
+ goto immediate;
-/*
- * Write out big-endian.
- */
-void
- md_number_to_chars(buf,val,n)
-char *buf;
-long val;
-int n;
-{
- switch(n) {
-
- case 4:
- *buf++ = val >> 24;
- *buf++ = val >> 16;
- case 2:
- *buf++ = val >> 8;
- case 1:
- *buf = val;
- break;
-
- default:
- as_fatal("failed sanity check.");
- }
- return;
-}
+ /* 16-bit split immediate. */
+ case 's':
+ the_insn.fup |= OP_IMM_SPLIT16;
+ goto immediate;
+
+ /* 16-bit split immediate, byte aligned (st.b). */
+ case 'S':
+ the_insn.fup |= OP_IMM_SPLIT16;
+ goto immediate;
+
+ /* 16-bit split immediate, half-word aligned (st.s). */
+ case 'T':
+ the_insn.fup |= (OP_IMM_SPLIT16 | OP_ENCODE1 | OP_ALIGN2);
+ goto immediate;
+
+ /* 16-bit split immediate, word aligned (st.l). */
+ case 'U':
+ the_insn.fup |= (OP_IMM_SPLIT16 | OP_ENCODE1 | OP_ALIGN4);
+ goto immediate;
+
+ /* 16-bit immediate. */
+ case 'i':
+ the_insn.fup |= OP_IMM_S16;
+ goto immediate;
+
+ /* 16-bit immediate, byte aligned (ld.b). */
+ case 'I':
+ the_insn.fup |= OP_IMM_S16;
+ goto immediate;
+
+ /* 16-bit immediate, half-word aligned (ld.s). */
+ case 'J':
+ the_insn.fup |= (OP_IMM_S16 | OP_ENCODE1 | OP_ALIGN2);
+ goto immediate;
+
+ /* 16-bit immediate, word aligned (ld.l, {p}fld.l, fst.l). */
+ case 'K':
+ if (insn->name[0] == 'l')
+ the_insn.fup |= (OP_IMM_S16 | OP_ENCODE1 | OP_ALIGN4);
+ else
+ the_insn.fup |= (OP_IMM_S16 | OP_ENCODE2 | OP_ALIGN4);
+ goto immediate;
+
+ /* 16-bit immediate, double-word aligned ({p}fld.d, fst.d). */
+ case 'L':
+ the_insn.fup |= (OP_IMM_S16 | OP_ENCODE3 | OP_ALIGN8);
+ goto immediate;
+
+ /* 16-bit immediate, quad-word aligned (fld.q, fst.q). */
+ case 'M':
+ the_insn.fup |= (OP_IMM_S16 | OP_ENCODE3 | OP_ALIGN16);
+
+ /*FALLTHROUGH*/
+
+ /* Handle the immediate for either the Intel syntax or
+ SVR4 syntax. The Intel syntax is "ha%immediate"
+ whereas SVR4 syntax is "[immediate]@ha". */
+ immediate:
+#ifdef SYNTAX_SVR4
+ if (*s == ' ')
+ s++;
+
+ /* Note that if i860_get_expression() fails, we will still
+ have created U entries in the symbol table for the
+ 'symbols' in the input string. Try not to create U
+ symbols for registers, etc. */
+ if (! i860_get_expression (s))
+ s = expr_end;
+ else
+ goto error;
+
+ if (strncmp (s, "@ha", 3) == 0)
+ {
+ the_insn.fup |= OP_SEL_HA;
+ s += 3;
+ }
+ else if (strncmp (s, "@h", 2) == 0)
+ {
+ the_insn.fup |= OP_SEL_H;
+ s += 2;
+ }
+ else if (strncmp (s, "@l", 2) == 0)
+ {
+ the_insn.fup |= OP_SEL_L;
+ s += 2;
+ }
+ else if (strncmp (s, "@gotoff", 7) == 0
+ || strncmp (s, "@GOTOFF", 7) == 0)
+ {
+ as_bad (_("Assembler does not yet support PIC"));
+ the_insn.fup |= OP_SEL_GOTOFF;
+ s += 7;
+ }
+ else if (strncmp (s, "@got", 4) == 0
+ || strncmp (s, "@GOT", 4) == 0)
+ {
+ as_bad (_("Assembler does not yet support PIC"));
+ the_insn.fup |= OP_SEL_GOT;
+ s += 4;
+ }
+ else if (strncmp (s, "@plt", 4) == 0
+ || strncmp (s, "@PLT", 4) == 0)
+ {
+ as_bad (_("Assembler does not yet support PIC"));
+ the_insn.fup |= OP_SEL_PLT;
+ s += 4;
+ }
+
+ the_insn.expand = insn->expand;
+
+ continue;
+#else /* ! SYNTAX_SVR4 */
+ if (*s == ' ')
+ s++;
+ if (strncmp (s, "ha%", 3) == 0)
+ {
+ the_insn.fup |= OP_SEL_HA;
+ s += 3;
+ }
+ else if (strncmp (s, "h%", 2) == 0)
+ {
+ the_insn.fup |= OP_SEL_H;
+ s += 2;
+ }
+ else if (strncmp (s, "l%", 2) == 0)
+ {
+ the_insn.fup |= OP_SEL_L;
+ s += 2;
+ }
+ the_insn.expand = insn->expand;
+
+ /* Note that if i860_get_expression() fails, we will still
+ have created U entries in the symbol table for the
+ 'symbols' in the input string. Try not to create U
+ symbols for registers, etc. */
+ if (! i860_get_expression (s))
+ s = expr_end;
+ else
+ goto error;
+
+ continue;
+#endif /* SYNTAX_SVR4 */
+ break;
-void md_number_to_imm(buf,val,n, fixP)
-char *buf;
-long val;
-int n;
-fixS *fixP;
-{
- enum reloc_type reloc = fixP->fx_r_type & 0xf;
- enum highlow_type highlow = (fixP->fx_r_type >> 4) & 0x3;
-
- assert(buf);
- assert(n == 4); /* always on i860 */
-
- switch(highlow)
- {
-
- case HIGHADJ: /* adjusts the high-order 16-bits */
- if (val & (1 << 15))
- val += (1 << 16);
-
- /*FALLTHROUGH*/
-
- case HIGH: /* selects the high-order 16-bits */
- val >>= 16;
- break;
-
- case PAIR: /* selects the low-order 16-bits */
- val = val & 0xffff;
- break;
-
default:
- break;
+ as_fatal (_("failed sanity check."));
}
-
- switch(reloc)
+ break;
+ }
+ error:
+ if (match == 0)
+ {
+ /* Args don't match. */
+ if (insn[1].name != NULL
+ && ! strcmp (insn->name, insn[1].name))
{
-
- case BRADDR: /* br,call,bc,bc.t,bnc,bnc.t w/26-bit immediate */
- if (fixP->fx_pcrel != 1)
- as_bad("26-bit branch w/o pc relative set: 0x%08x", val);
- val >>= 2; /* align pcrel offset, see manual */
-
- if (val >= (1 << 25) || val < -(1 << 25)) /* check for overflow */
- as_bad("26-bit branch offset overflow: 0x%08x", val);
- buf[0] = (buf[0] & 0xfc) | ((val >> 24) & 0x3);
- buf[1] = val >> 16;
- buf[2] = val >> 8;
- buf[3] = val;
- break;
-
- case SPLIT2: /* 16 bit immediate, 4-byte aligned */
- if (val & 0x3)
- as_bad("16-bit immediate 4-byte alignment error: 0x%08x", val);
- val &= ~0x3; /* 4-byte align value */
- /*FALLTHROUGH*/
- case SPLIT1: /* 16 bit immediate, 2-byte aligned */
- if (val & 0x1)
- as_bad("16-bit immediate 2-byte alignment error: 0x%08x", val);
- val &= ~0x1; /* 2-byte align value */
- /*FALLTHROUGH*/
- case SPLIT0: /* st,bla,bte,btne w/16-bit immediate */
- if (fixP->fx_pcrel == 1)
- val >>= 2; /* align pcrel offset, see manual */
- /* check for bounds */
- if (highlow != PAIR && (val >= (1 << 16) || val < -(1 << 15)))
- as_bad("16-bit branch offset overflow: 0x%08x", val);
- buf[1] = (buf[1] & ~0x1f) | ((val >> 11) & 0x1f);
- buf[2] = (buf[2] & ~0x7) | ((val >> 8) & 0x7);
- buf[3] |= val; /* perserve bottom opcode bits */
- break;
-
- case LOW4: /* fld,pfld,pst,flush 16-byte aligned */
- if (val & 0xf)
- as_bad("16-bit immediate 16-byte alignment error: 0x%08x", val);
- val &= ~0xf; /* 16-byte align value */
- /*FALLTHROUGH*/
- case LOW3: /* fld,pfld,pst,flush 8-byte aligned */
- if (val & 0x7)
- as_bad("16-bit immediate 8-byte alignment error: 0x%08x", val);
- val &= ~0x7; /* 8-byte align value */
- /*FALLTHROUGH*/
- case LOW2: /* 16 bit immediate, 4-byte aligned */
- if (val & 0x3)
- as_bad("16-bit immediate 4-byte alignment error: 0x%08x", val);
- val &= ~0x3; /* 4-byte align value */
- /*FALLTHROUGH*/
- case LOW1: /* 16 bit immediate, 2-byte aligned */
- if (val & 0x1)
- as_bad("16-bit immediate 2-byte alignment error: 0x%08x", val);
- val &= ~0x1; /* 2-byte align value */
- /*FALLTHROUGH*/
- case LOW0: /* 16 bit immediate, byte aligned */
- /* check for bounds */
- if (highlow != PAIR && (val >= (1 << 16) || val < -(1 << 15)))
- as_bad("16-bit immediate overflow: 0x%08x", val);
- buf[2] = val >> 8;
- buf[3] |= val; /* perserve bottom opcode bits */
- break;
-
- case NO_RELOC:
- default:
- as_bad("bad relocation type: 0x%02x", reloc);
- break;
+ ++insn;
+ s = args_start;
+ continue;
}
- return;
-}
+ else
+ {
+ as_bad (_("Illegal operands for %s"), insn->name);
+ return;
+ }
+ }
+ break;
+ }
-/* should never be called for i860 */
-void
- md_create_short_jump(ptr, from_addr, to_addr, frag, to_symbol)
-char *ptr;
-long from_addr, to_addr;
-fragS *frag;
-symbolS *to_symbol;
-{
- as_fatal("i860_create_short_jmp\n");
+ the_insn.opcode = opcode;
}
-/* should never be called for i860 */
-void
- md_number_to_disp(buf,val,n)
-char *buf;
-long val;
+static int
+i860_get_expression (str)
+ char *str;
{
- as_fatal("md_number_to_disp\n");
+ char *save_in;
+ segT seg;
+
+ save_in = input_line_pointer;
+ input_line_pointer = str;
+ seg = expression (&the_insn.exp);
+ if (seg != absolute_section
+ && seg != undefined_section
+ && ! SEG_NORMAL (seg))
+ {
+ the_insn.error = _("bad segment");
+ expr_end = input_line_pointer;
+ input_line_pointer = save_in;
+ return 1;
+ }
+ expr_end = input_line_pointer;
+ input_line_pointer = save_in;
+ return 0;
}
-/* should never be called for i860 */
-void
- md_number_to_field(buf,val,fix)
-char *buf;
-long val;
-void *fix;
+/* Turn a string in input_line_pointer into a floating point constant of
+ type TYPE, and store the appropriate bytes in *LITP. The number of
+ LITTLENUMS emitted is stored in *SIZEP. An error message is returned,
+ or NULL on OK. */
+
+/* Equal to MAX_PRECISION in atof-ieee.c. */
+#define MAX_LITTLENUMS 6
+
+char *
+md_atof (type, litP, sizeP)
+ char type;
+ char *litP;
+ int *sizeP;
{
- as_fatal("i860_number_to_field\n");
+ int prec;
+ LITTLENUM_TYPE words[MAX_LITTLENUMS];
+ LITTLENUM_TYPE *wordP;
+ char *t;
+ char *atof_ieee ();
+
+ switch (type)
+ {
+ case 'f':
+ case 'F':
+ case 's':
+ case 'S':
+ prec = 2;
+ break;
+
+ case 'd':
+ case 'D':
+ case 'r':
+ case 'R':
+ prec = 4;
+ break;
+
+ case 'x':
+ case 'X':
+ prec = 6;
+ break;
+
+ case 'p':
+ case 'P':
+ prec = 6;
+ break;
+
+ default:
+ *sizeP = 0;
+ return _("Bad call to MD_ATOF()");
+ }
+ t = atof_ieee (input_line_pointer, type, words);
+ if (t)
+ input_line_pointer = t;
+ *sizeP = prec * sizeof (LITTLENUM_TYPE);
+ for (wordP = words; prec--;)
+ {
+ md_number_to_chars (litP, (long) (*wordP++), sizeof (LITTLENUM_TYPE));
+ litP += sizeof (LITTLENUM_TYPE);
+ }
+ return 0;
}
-/* the bit-field entries in the relocation_info struct plays hell
- with the byte-order problems of cross-assembly. So as a hack,
- I added this mach. dependent ri twiddler. Ugly, but it gets
- you there. -KWK */
-/* on i860: first 4 bytes are normal unsigned long address, next three
- bytes are index, most sig. byte first. Byte 7 is broken up with
- bit 7 as pcrel, bit 6 as extern, and the lower six bits as
- relocation type (highlow 5-4). Next 4 bytes are long addend. */
-/* Thanx and a tip of the hat to Michael Bloom, mb@ttidca.tti.com */
+/* Write out in current endian mode. */
void
- md_ri_to_chars(ri_p, ri)
-struct relocation_info *ri_p, ri;
+md_number_to_chars (buf, val, n)
+ char *buf;
+ valueT val;
+ int n;
{
-#if 0
- unsigned char the_bytes[sizeof(*ri_p)];
-
- /* this is easy */
- md_number_to_chars(the_bytes, ri.r_address, sizeof(ri.r_address));
- /* now the fun stuff */
- the_bytes[4] = (ri.r_index >> 16) & 0x0ff;
- the_bytes[5] = (ri.r_index >> 8) & 0x0ff;
- the_bytes[6] = ri.r_index & 0x0ff;
- the_bytes[7] = ((ri.r_extern << 7) & 0x80) | (0 & 0x60) | (ri.r_type & 0x1F);
- /* Also easy */
- md_number_to_chars(&the_bytes[8], ri.r_addend, sizeof(ri.r_addend));
- /* now put it back where you found it, Junior... */
- memcpy((char *) ri_p, the_bytes, sizeof(*ri_p));
-#endif
+ if (target_big_endian)
+ number_to_chars_bigendian (buf, val, n);
+ else
+ number_to_chars_littleendian (buf, val, n);
}
-/* should never be called for i860 */
+/* This should never be called for i860. */
void
- md_convert_frag(headers, fragP)
-object_headers *headers;
-register fragS *fragP;
+md_number_to_disp (buf, val, n)
+ char *buf ATTRIBUTE_UNUSED;
+ long val ATTRIBUTE_UNUSED;
+ int n ATTRIBUTE_UNUSED;
{
- as_fatal("i860_convert_frag\n");
+ as_fatal (_("md_number_to_disp\n"));
}
-/* should never be called for i860 */
+/* This should never be called for i860. */
void
- md_create_long_jump(ptr, from_addr, to_addr, frag, to_symbol)
-char *ptr;
-long from_addr,
- to_addr;
-fragS *frag;
-symbolS *to_symbol;
+md_number_to_field (buf, val, fix)
+ char *buf ATTRIBUTE_UNUSED;
+ long val ATTRIBUTE_UNUSED;
+ void *fix ATTRIBUTE_UNUSED;
{
- as_fatal("i860_create_long_jump\n");
+ as_fatal (_("i860_number_to_field\n"));
}
-/* should never be called for i860 */
+/* This should never be called for i860. */
int
- md_estimate_size_before_relax(fragP, segtype)
-register fragS *fragP;
-segT segtype;
+md_estimate_size_before_relax (fragP, segtype)
+ register fragS *fragP ATTRIBUTE_UNUSED;
+ segT segtype ATTRIBUTE_UNUSED;
{
- as_fatal("i860_estimate_size_before_relax\n");
+ as_fatal (_("i860_estimate_size_before_relax\n"));
}
-/* for debugging only, must match enum reloc_type */
-static char *Reloc[] = {
- "NO_RELOC",
- "BRADDR",
- "LOW0",
- "LOW1",
- "LOW2",
- "LOW3",
- "LOW4",
- "SPLIT0",
- "SPLIT1",
- "SPLIT2",
- "RELOC_32",
-};
-static char *Highlow[] = {
- "NO_SPEC",
- "PAIR",
- "HIGH",
- "HIGHADJ",
-};
+#ifdef DEBUG_I860
static void
- print_insn(insn)
-struct i860_it *insn;
+print_insn (insn)
+ struct i860_it *insn;
{
- if (insn->error) {
- fprintf(stderr, "ERROR: %s\n");
- }
- fprintf(stderr, "opcode=0x%08x\t", insn->opcode);
- fprintf(stderr, "expand=0x%08x\t", insn->expand);
- fprintf(stderr, "reloc = %s\t", Reloc[insn->reloc]);
- fprintf(stderr, "highlow = %s\n", Highlow[insn->highlow]);
- fprintf(stderr, "exp = {\n");
- fprintf(stderr, "\t\tX_add_symbol = %s\n",
- insn->exp.X_add_symbol ?
- (S_GET_NAME(insn->exp.X_add_symbol) ?
- S_GET_NAME(insn->exp.X_add_symbol) : "???") : "0");
- fprintf(stderr, "\t\tX_sub_symbol = %s\n",
- insn->exp.X_subtract_symbol ?
- (S_GET_NAME(insn->exp.X_subtract_symbol) ?
- S_GET_NAME(insn->exp.X_subtract_symbol) : "???") : "0");
- fprintf(stderr, "\t\tX_add_number = %d\n",
- insn->exp.X_add_number);
- fprintf(stderr, "}\n");
- return;
+ if (insn->error)
+ fprintf (stderr, "ERROR: %s\n", insn->error);
+
+ fprintf (stderr, "opcode = 0x%08lx\t", insn->opcode);
+ fprintf (stderr, "expand = 0x%x\t", insn->expand);
+ fprintf (stderr, "reloc = %s\t\n",
+ bfd_get_reloc_code_name (insn->reloc));
+ fprintf (stderr, "exp = {\n");
+ fprintf (stderr, "\t\tX_add_symbol = %s\n",
+ insn->exp.X_add_symbol ?
+ (S_GET_NAME (insn->exp.X_add_symbol) ?
+ S_GET_NAME (insn->exp.X_add_symbol) : "???") : "0");
+ fprintf (stderr, "\t\tX_op_symbol = %s\n",
+ insn->exp.X_op_symbol ?
+ (S_GET_NAME (insn->exp.X_op_symbol) ?
+ S_GET_NAME (insn->exp.X_op_symbol) : "???") : "0");
+ fprintf (stderr, "\t\tX_add_number = %lx\n",
+ insn->exp.X_add_number);
+ fprintf (stderr, "}\n");
}
+#endif /* DEBUG_I860 */
+
+\f
+#ifdef OBJ_ELF
+CONST char *md_shortopts = "VQ:";
+#else
+CONST char *md_shortopts = "";
+#endif
+
+#define OPTION_EB (OPTION_MD_BASE + 0)
+#define OPTION_EL (OPTION_MD_BASE + 1)
+#define OPTION_WARN_EXPAND (OPTION_MD_BASE + 2)
+
+struct option md_longopts[] = {
+ { "EB", no_argument, NULL, OPTION_EB },
+ { "EL", no_argument, NULL, OPTION_EL },
+ { "mwarn-expand", no_argument, NULL, OPTION_WARN_EXPAND },
+ { NULL, no_argument, NULL, 0 }
+};
+size_t md_longopts_size = sizeof (md_longopts);
int
- md_parse_option(argP,cntP,vecP)
-char **argP;
-int *cntP;
-char ***vecP;
+md_parse_option (c, arg)
+ int c;
+ char *arg ATTRIBUTE_UNUSED;
{
- return 1;
+ switch (c)
+ {
+ case OPTION_EB:
+ target_big_endian = 1;
+ break;
+
+ case OPTION_EL:
+ target_big_endian = 0;
+ break;
+
+ case OPTION_WARN_EXPAND:
+ target_warn_expand = 1;
+ break;
+
+#ifdef OBJ_ELF
+ /* SVR4 argument compatibility (-V): print version ID. */
+ case 'V':
+ print_version_id ();
+ break;
+
+ /* SVR4 argument compatibility (-Qy, -Qn): controls whether
+ a .comment section should be emitted or not (ignored). */
+ case 'Q':
+ break;
+#endif
+
+ default:
+ return 0;
+ }
+
+ return 1;
}
-/*
- * I860 relocations are completely different, so it needs
- * this machine dependent routine to emit them.
- */
void
- emit_machine_reloc(fixP, segment_address_in_file)
-register fixS *fixP;
-relax_addressT segment_address_in_file;
+md_show_usage (stream)
+ FILE *stream;
{
- struct reloc_info_i860 ri;
- register symbolS *symbolP;
- extern char *next_object_file_charP;
- long add_number;
-
- memset((char *) &ri, '\0', sizeof(ri));
- for (; fixP; fixP = fixP->fx_next) {
-
- if (fixP->fx_r_type & ~0x3f) {
- as_fatal("fixP->fx_r_type = %d\n", fixP->fx_r_type);
- }
- ri.r_pcrel = fixP->fx_pcrel;
- ri.r_type = fixP->fx_r_type;
-
- if ((symbolP = fixP->fx_addsy) != NULL) {
- ri.r_address = fixP->fx_frag->fr_address +
- fixP->fx_where - segment_address_in_file;
- if ((symbolP->sy_type & N_TYPE) == N_UNDF) {
- ri.r_extern = 1;
- ri.r_symbolnum = symbolP->sy_number;
- } else {
- ri.r_extern = 0;
- ri.r_symbolnum = symbolP->sy_type & N_TYPE;
- }
- if (symbolP && symbolP->sy_frag) {
- ri.r_addend = symbolP->sy_frag->fr_address;
- }
- ri.r_type = fixP->fx_r_type;
- if (fixP->fx_pcrel) {
- /* preserve actual offset vs. pc + 4 */
- ri.r_addend -= (ri.r_address + 4);
- } else {
- ri.r_addend = fixP->fx_addnumber;
- }
-
- md_ri_to_chars((char *) &ri, ri);
- append(&next_object_file_charP, (char *)& ri, sizeof(ri));
- }
- }
- return;
+ fprintf (stream, _("\
+ -EL generate code for little endian mode (default)\n\
+ -EB generate code for big endian mode\n\
+ -mwarn-expand warn if pseudo operations are expanded\n"));
+#ifdef OBJ_ELF
+ /* SVR4 compatibility flags. */
+ fprintf (stream, _("\
+ -V print assembler version number\n\
+ -Qy, -Qn ignored\n"));
+#endif
}
-/* Parse an operand that is machine-specific.
- We just return without modifying the expression if we have nothing
- to do. */
+\f
+/* We have no need to default values of symbols. */
+symbolS *
+md_undefined_symbol (name)
+ char *name ATTRIBUTE_UNUSED;
+{
+ return 0;
+}
-/* ARGSUSED */
+/* The i860 denotes auto-increment with '++'. */
void
- md_operand (expressionP)
-expressionS *expressionP;
+md_operand (exp)
+ expressionS *exp;
{
-}
+ char *s;
-/* We have no need to default values of symbols. */
+ for (s = input_line_pointer; *s; s++)
+ {
+ if (s[0] == '+' && s[1] == '+')
+ {
+ input_line_pointer += 2;
+ exp->X_op = O_register;
+ break;
+ }
+ }
+}
-/* ARGSUSED */
-symbolS *
- md_undefined_symbol (name)
-char *name;
+/* Round up a section size to the appropriate boundary. */
+valueT
+md_section_align (segment, size)
+ segT segment ATTRIBUTE_UNUSED;
+ valueT size ATTRIBUTE_UNUSED;
{
- return 0;
+ /* Byte alignment is fine. */
+ return size;
}
-/* Round up a section size to the appropriate boundary. */
+/* On the i860, a PC-relative offset is relative to the address of the
+ of the offset plus its size. */
long
- md_section_align (segment, size)
-segT segment;
-long size;
+md_pcrel_from (fixP)
+ fixS *fixP;
{
- return size; /* Byte alignment is fine */
+ return fixP->fx_size + fixP->fx_where + fixP->fx_frag->fr_address;
}
-/* Exactly what point is a PC-relative offset relative TO?
- On the i860, they're relative to the address of the offset, plus
- its size. (??? Is this right? FIXME-SOON!) */
-long
- md_pcrel_from (fixP)
-fixS *fixP;
+/* Determine the relocation needed for non PC-relative 16-bit immediates.
+ Also adjust the given immediate as necessary. Finally, check that
+ all constraints (such as alignment) are satisfied. */
+static bfd_reloc_code_real_type
+obtain_reloc_for_imm16 (fix, val)
+ fixS *fix;
+ long *val;
{
- return fixP->fx_size + fixP->fx_where + fixP->fx_frag->fr_address;
+ valueT fup = fix->fx_addnumber;
+ bfd_reloc_code_real_type reloc;
+
+ if (fix->fx_pcrel)
+ abort ();
+
+ /* Check alignment restrictions. */
+ if ((fup & OP_ALIGN2) && (*val & 0x1))
+ as_bad_where (fix->fx_file, fix->fx_line,
+ _("This immediate requires 0 MOD 2 alignment"));
+ else if ((fup & OP_ALIGN4) && (*val & 0x3))
+ as_bad_where (fix->fx_file, fix->fx_line,
+ _("This immediate requires 0 MOD 4 alignment"));
+ else if ((fup & OP_ALIGN8) && (*val & 0x7))
+ as_bad_where (fix->fx_file, fix->fx_line,
+ _("This immediate requires 0 MOD 8 alignment"));
+ else if ((fup & OP_ALIGN16) && (*val & 0xf))
+ as_bad_where (fix->fx_file, fix->fx_line,
+ _("This immediate requires 0 MOD 16 alignment"));
+
+ if (fup & OP_SEL_HA)
+ {
+ *val = (*val >> 16) + (*val & 0x8000 ? 1 : 0);
+ reloc = BFD_RELOC_860_HIGHADJ;
+ }
+ else if (fup & OP_SEL_H)
+ {
+ *val >>= 16;
+ reloc = BFD_RELOC_860_HIGH;
+ }
+ else if (fup & OP_SEL_L)
+ {
+ int num_encode;
+ if (fup & OP_IMM_SPLIT16)
+ {
+ if (fup & OP_ENCODE1)
+ {
+ num_encode = 1;
+ reloc = BFD_RELOC_860_SPLIT1;
+ }
+ else if (fup & OP_ENCODE2)
+ {
+ num_encode = 2;
+ reloc = BFD_RELOC_860_SPLIT2;
+ }
+ else
+ {
+ num_encode = 0;
+ reloc = BFD_RELOC_860_SPLIT0;
+ }
+ }
+ else
+ {
+ if (fup & OP_ENCODE1)
+ {
+ num_encode = 1;
+ reloc = BFD_RELOC_860_LOW1;
+ }
+ else if (fup & OP_ENCODE2)
+ {
+ num_encode = 2;
+ reloc = BFD_RELOC_860_LOW2;
+ }
+ else if (fup & OP_ENCODE3)
+ {
+ num_encode = 3;
+ reloc = BFD_RELOC_860_LOW3;
+ }
+ else
+ {
+ num_encode = 0;
+ reloc = BFD_RELOC_860_LOW0;
+ }
+ }
+
+ /* Preserve size encode bits. */
+ *val &= ~((1 << num_encode) - 1);
+ }
+ else
+ {
+ /* No selector. What reloc do we generate (???)? */
+ reloc = BFD_RELOC_32;
+ }
+
+ return reloc;
}
-void
- md_apply_fix(fixP, val)
-fixS *fixP;
-long val;
+/* Attempt to simplify or eliminate a fixup. To indicate that a fixup
+ has been eliminated, set fix->fx_done. If fix->fx_addsy is non-NULL,
+ we will have to generate a reloc entry. */
+int
+md_apply_fix3 (fix, valuep, seg)
+ fixS *fix;
+ valueT *valuep;
+ segT seg ATTRIBUTE_UNUSED;
{
- char *place = fixP->fx_where + fixP->fx_frag->fr_literal;
-
- if (!fixP->fx_bit_fixP) {
-
- switch (fixP->fx_im_disp) {
- case 0:
- fixP->fx_addnumber = val;
- md_number_to_imm(place, val, fixP->fx_size, fixP);
- break;
- case 1:
- md_number_to_disp (place,
- fixP->fx_pcrel ? val+fixP->fx_pcrel_adjust:val,
- fixP->fx_size);
- break;
- case 2: /* fix requested for .long .word etc */
- md_number_to_chars (place, val, fixP->fx_size);
- break;
- default:
- as_fatal("Internal error in md_apply_fix() in file \"%s\"", __FILE__);
- } /* OVE: maybe one ought to put _imm _disp _chars in one md-func */
- } else {
- md_number_to_field (place, val, fixP->fx_bit_fixP);
+
+ char *buf;
+ long val = (long) (*valuep);
+ unsigned long insn;
+ valueT fup;
+
+ buf = fix->fx_frag->fr_literal + fix->fx_where;
+
+ /* Recall that earlier we stored the opcode little-endian. */
+ insn = bfd_getl32 (buf);
+
+ /* We stored a fix-up in this oddly-named scratch field. */
+ fup = fix->fx_addnumber;
+
+ /* Determine the necessary relocations as well as inserting an
+ immediate into the instruction. */
+ if (fup == OP_IMM_U5)
+ {
+ if (val & ~0x1f)
+ as_bad_where (fix->fx_file, fix->fx_line,
+ _("5-bit immediate too large"));
+ if (fix->fx_addsy)
+ as_bad_where (fix->fx_file, fix->fx_line,
+ _("5-bit field must be absolute"));
+
+ insn |= (val & 0x1f) << 11;
+ bfd_putl32 (insn, buf);
+ fix->fx_r_type = BFD_RELOC_NONE;
+ fix->fx_done = 1;
+ }
+ else if (fup & OP_IMM_S16)
+ {
+ fix->fx_r_type = obtain_reloc_for_imm16 (fix, &val);
+
+ /* Insert the immediate. */
+ if (fix->fx_addsy)
+ fix->fx_done = 0;
+ else
+ {
+ insn |= val & 0xffff;
+ bfd_putl32 (insn, buf);
+ fix->fx_r_type = BFD_RELOC_NONE;
+ fix->fx_done = 1;
+ }
+ }
+ else if (fup & OP_IMM_U16)
+ {
+ abort ();
+ }
+ else if (fup & OP_IMM_SPLIT16)
+ {
+ fix->fx_r_type = obtain_reloc_for_imm16 (fix, &val);
+
+ /* Insert the immediate. */
+ if (fix->fx_addsy)
+ fix->fx_done = 0;
+ else
+ {
+ insn |= val & 0x7ff;
+ insn |= (val & 0xf800) << 5;
+ bfd_putl32 (insn, buf);
+ fix->fx_r_type = BFD_RELOC_NONE;
+ fix->fx_done = 1;
+ }
+ }
+ else if (fup & OP_IMM_BR16)
+ {
+ if (val & 0x3)
+ as_bad_where (fix->fx_file, fix->fx_line,
+ _("A branch offset requires 0 MOD 4 alignment"));
+
+ val = val >> 2;
+
+ /* Insert the immediate. */
+ if (fix->fx_addsy)
+ {
+ fix->fx_done = 0;
+ fix->fx_r_type = BFD_RELOC_860_PC16;
+ }
+ else
+ {
+ insn |= (val & 0x7ff);
+ insn |= ((val & 0xf800) << 5);
+ bfd_putl32 (insn, buf);
+ fix->fx_r_type = BFD_RELOC_NONE;
+ fix->fx_done = 1;
+ }
+ }
+ else if (fup & OP_IMM_BR26)
+ {
+ if (val & 0x3)
+ as_bad_where (fix->fx_file, fix->fx_line,
+ _("A branch offset requires 0 MOD 4 alignment"));
+
+ val >>= 2;
+
+ /* Insert the immediate. */
+ if (fix->fx_addsy)
+ {
+ fix->fx_r_type = BFD_RELOC_860_PC26;
+ fix->fx_done = 0;
+ }
+ else
+ {
+ insn |= (val & 0x3ffffff);
+ bfd_putl32 (insn, buf);
+ fix->fx_r_type = BFD_RELOC_NONE;
+ fix->fx_done = 1;
+ }
+ }
+ else if (fup != OP_NONE)
+ {
+ as_bad_where (fix->fx_file, fix->fx_line,
+ _("Unrecognized fix-up (0x%08x)"), fup);
+ abort ();
+ }
+ else
+ {
+ /* I believe only fix-ups such as ".long .ep.main-main+0xc8000000"
+ reach here (???). */
+ if (fix->fx_addsy)
+ {
+ fix->fx_r_type = BFD_RELOC_32;
+ fix->fx_done = 0;
}
-
- return;
-} /* md_apply_fix() */
+ else
+ {
+ insn |= (val & 0xffffffff);
+ bfd_putl32 (insn, buf);
+ fix->fx_r_type = BFD_RELOC_NONE;
+ fix->fx_done = 1;
+ }
+ }
-/*
- * Local Variables:
- * fill-column: 131
- * comment-column: 0
- */
+ /* Return value ignored. */
+ return 0;
+}
-/* end of tc-i860.c */
+/* Generate a machine dependent reloc from a fixup. */
+arelent*
+tc_gen_reloc (section, fixp)
+ asection *section ATTRIBUTE_UNUSED;
+ fixS *fixp;
+{
+ arelent *reloc;
+
+ reloc = xmalloc (sizeof (*reloc));
+ reloc->sym_ptr_ptr = (asymbol **) xmalloc (sizeof (asymbol *));
+ *reloc->sym_ptr_ptr = symbol_get_bfdsym (fixp->fx_addsy);
+ reloc->address = fixp->fx_frag->fr_address + fixp->fx_where;
+ reloc->addend = fixp->fx_offset;
+ reloc->howto = bfd_reloc_type_lookup (stdoutput, fixp->fx_r_type);
+
+ if (! reloc->howto)
+ {
+ as_bad_where (fixp->fx_file, fixp->fx_line,
+ "Cannot represent %s relocation in object file",
+ bfd_get_reloc_code_name (fixp->fx_r_type));
+ }
+ return reloc;
+}
projects / deliverable / binutils-gdb.git / blobdiff